CITOTIG DC Professional range
|
|
- Garry Cross
- 7 years ago
- Views:
Transcription
1 DC Professional range Portable TIG DC welding installations
2 DC Professional range DC Professional offers leading technology in TIG DC welding with a user friendly interface. DC High quality welding results on carbon and stainless steels. For high demanding sectors of activity. Petrochemicals Boiler making Offshore 00-8 Shipbuilding Piping
3 DC Professional range Additional features include program storage capability and improved reliability due to Power Factor Control technology. DC Professional range delivers more power with reduced consumption: up to 0 A with a domestic A plug. Product description and features Modular technology to improve reliability. Built-in Power Factor Control device in conformance with future national standards and to improve efficiency and reduce electrical consumption. Factory fitted with a domestic A plug. Improved compatibility with generators (+/- 0% input voltage variations). Works with extra long primary cables (0 m with. mm section) EASY HPF A simple welding cycle TIG DC or MMA mode HF and TIG Lift Pre and Post gas adjustment T / T mode 0 A at % EASY: 00 HPF front panel Safety and operation indication Main current regulation Process selection (MMA / TIG HF / TIG Lift) Trigger cycle selection T / T Pre-gas time selection Slope-down time selection Post-gas time selection EXPERT A complete welding cycle is straightforward to set: initial, final current, up-slope, downslope, spot time, pre-gas, post-gas, reduced current (T), pulsed frequency regulation High performance for MMA: up to 80 A at 0% at 0 C Program storage capability (0) EXPERT front panel Welding mode (MMA, TIG with PAC striking, TIG with HF striking) TIG welding: Times, Times, Spot Pulsed - DC selection mode Remote control - Foot pedal control selection Programs storage and recall Digital display Complete welding cycle
4 Comply with the EN 000--/ standard effective since december 00, that limits the harmonic currents produced by equipment connected to public low-voltage systems High Power Factor A plug 00-0 Generator compatible Technical characteristics Single-phase input voltage 00 HPF 800 EXPERT 00 EXPERT MMA TIG MMA TIG MMA TIG 0 V +/- 0% 0/0 Hz 0 V +/- 0% 0/0 Hz 0 V +/- 0% 0/0 Hz Effective input current A A A A A A Open circuit voltage 9. V 0 V 0 V Welding current range 0-0 A - 0 A - 80 A - 0 A 0% 0 A % - 0 A 0 A A Duty cycle at 0 C 0% A 80 A - 0% 0 A 0 A 0 A 0 A 0 A 80 A 00 % 0 A 0 A 0 A 0 A 0 A 0 A Connector size mm Protection index IP S Weight 9. kg Dimensions 0 x x 0 mm EN 09. European standards EN 09.0 EN 000--/ Delivered equipped with Primary cable, user manual, safety instructions, gas hose, earth cable with clamp ( m) This equipment are designed for industrial and professional use only. Options and accessories Remote control Foot pedal A B Universal trolley C D 0-98 Power source 00 HPF W Expert W0009 Option and accessories (only for EXPERT) Remote control 0 m Foot pedal Universal trolley On site case A - W00009 B - W0000 C W0000 D W Expert W On site case
5 TIG torches The new range of CITORCH T NG TIG torches perfectly fit with the high level of quality provided by the DC professional range The adapted models are CITORCH T 0, 0 or 0 (air cooled torches). They come: either with trigger as a blade: RL models or as a button: EB types. The EB types are modular as they can be modified with the different type of buttons. Modular system: All torches are delivered with a single button module. If you want another control module, order it separatly. See complete range in the CITORCH T NG brochure Cooling Duty Cycle Cat. number maintenance box CITORCH T NG 0 RL CB RL: Blade CITORCH T NG 0 RL CB Air 0 % 00 0% CITORCH T NG 0 RL CB % 80 0% 00 % 0 0% m 8 m m 8 m m 8 m W W W W W W W0000 W0000 W Horizontal potmeter - W00090 Vertical potmeter - W0009 Doublon button - W0009 Blade - W0009 For potmeter adapt the wiring to the welding machine using the 0 pins plug - W In option: Adjustable heads As an option, adjustable torch bodies are available. Welding in inaccessible locations becomes easier. You have the choice of heads, small and large to be mounted on air cooled body. Choose one body and one head to get a complete torch EB: Button 0-00 Cooling Duty Cycle Cat. number maintenance box CITORCH T NG 0 EB CB CITORCH T NG 0 EB CB Air 0 % 00 0% CITORCH T NG 0 EB CB % 80 0% 00 % 0 0% m 8 m m 8 m m 8 m W W00088 W00088 W00088 W00088 W00088 W0000 W0000 W0000 Air cooled body - W00098 Head PROTIG NG 0 () - W00098 Head PROTIG NG 0-0 () - W00098 () : duty cycle : % () : duty cycle : % 00-99
SMARTY 160 POWER page 4-5 SMARTY 180 / 220 XL page 4-6 SMARTY TX 250 page 4-7. SMARTY TX 160 Alu page 4-8 SMARTY TX 220 Alu page 4-9
CHAPTER TIG welding Introduction pages - & - WELDING POWER SOURCES DC power sources SMARTY 60 POWER page -5 SMARTY 80 / 0 XL page -6 SMARTY TX 50 page -7 AC/DC power sources SMARTY TX 60 Alu page -8 SMARTY
More informationPRESTOTIG PFC / PRO Professional range
PRESTOTIG PFC / PRO Professional range Portable TIG DC welding installations www.saf-fro.com PRESTOTIG DC PFC / PRO Professional range PRESTOTIG DC Professional offers leading technology in TIG DC welding
More information2350-011. Chapter 2 TIG welding
350-011 Chapter TIG welding TIG welding TIG welding overview and selection guide Scheme of a manual installation for TIG welding Helmet/mask Protective clothing Filler metal rod Earth clamp Fume extraction
More informationSection 2 - TIG welding General information and choice criteria
Section 2 - TIG welding General information and choice criteria 0255-029 2000-173 3551-046 Scheme of a manual installation for TIG welding Filler wire Welding torch Regulator flowmeter Remote control for
More informationKemppi Mastertig MLS 2500 and 3500. Welding Versatility for Professionals
Kemppi Mastertig MLS 2500 and 3500 Welding Versatility for Professionals Kemppi Mastertig MLS 2500 and 3500 Welding Versatility for Professionals The Mastertig MLS 2500 and 3500 offer outstanding TIG performance
More information2350-012. Chapter 3 MIG/MAG welding
250-012 Chapter MIG/MAG welding 2000-489 MIG/MAG welding The transfer of metal Torch Nozzle Contact tip Gaseous protection Molten metal Electrode wire Weld bead MIG/MAG welding overview and selection guide
More informationTIG INVERTER INSTRUCTION MANUAL
TIG INVERTER INSTRUCTION MANUAL Contents Warning General Description Block Diagram Main Parameters Circuit Diagram Installation and Operation Caution Maintenance Spare Parts List Troubleshooting 3 4 4
More informationCITOTIG II DC Industrial range
CITOTIG II DC Industrial range The best of TIG welding using inverter technology for the most demanding welders. www.oerlikon-welding.com CITOTIG II DC Industrial range Single or three-phase portable inverters
More informationCITOTIG 240 & 310 AC/DC
CITOTIG 20 & 310 AC/DC TIG AC/DC machine for highly demanding welding specialists www.oerlikon-welding.com CITOTIG AC/DC CITOTIG AC/DC machines are designed to meet the expectations of the most demanding
More informationPRESTOTIG 240 & 310 AC/DC
PRESTOTIG 20 & 310 AC/DC TIG AC/DC machine for welding specialists www.saf-fro.com PRESTOTIG AC/DC PRESTOTIG AC/DC machines are designed to meet the expectations of the most demanding welders. Optimum
More informationMaster catalogue arc equipment
Master catalogue arc equipment MMA - TIG - MIG/MAG - Plasma cutting Master catalogue arc equipments 2008 / 2009 www.oerlikon-welding.com 2006-93 2008-204 2008-205 2008-206 OERLIKON is part of the Air Liquide
More informationTypical TIG-plasma solutions
Typical -plasma solutions 2228-005 2003-670 Boilers maker solutions 2004-257 1210-064 1210-067 64 3638-008 2008-400 1415-014 2000-169 2003-204 1467-003 2000-343 2000-160 Pipework solutions or plasma welded
More informationSquare Wave TIG 200 TIG WELDING MACHINE
Square Wave TIG 200 TIG WELDING MACHINE Simplicity Without Compromise The Square Wave TIG 200 is a portable TIG and stick welding machine that lets hobbyists, makers, small fabricators and craftsmen explore
More informationTIG torches... 3-2 to 3-5 Tungsten electrodes... 3-6 to 3-7 TIG consumables... 3-8 Miscellaneous... 3-9
3- welding torches........................................................... 3-2 to 3-5 Tungsten electrodes........................................ 3-6 to 3-7 consumables........................................................
More informationThis unit is a pump that will clear the waste from a domestic shower and washbasin, bath, washing machine, glass washer and a sink.
1. Description This unit is a pump that will clear the waste from a domestic shower and washbasin, bath, washing machine, glass washer and a sink. The unit will start automatically. Please pay particular
More informationElectric Rotary Actuator - On/Off or programmable control actuator
Electric Rotary Actuator - On/Off or programmable control actuator Direct mounting on quarter-turn valves Manual override standard Corrosion resistant Adjustable limit switches Multi-voltage version Type
More informationQuick Connect. quick - simple - efficient. www.g-mw.de
Quick Connect quick - simple - efficient www.g-mw.de Phone: +49 9103 7129-0 Fax: +49 9103 7129-207 Innovative connection technology to plug three single-phase current transformers to multifunctional power
More informationAdding Pneumatic Preset Counter. Type 497. Continuously visible preset Integrated pneumatic reset 3 or 5-digit display Convenient button setting
Adding Pneumatic Preset Counter Type 497 Continuously visible preset Integrated pneumatic reset 3 or 5-digit display Convenient button setting VARIABLE PILOT SIGNAL Using two pneumatic preset counters
More informationHow To Use A Flowmeter
INLINE flowmeter for continuous flow measurement Economic integration in pipe systems without any additional piping 3-wire frequency pulse version to directly interface with PLC s (both PNP and NPN) Connection
More informationGlobal Motion Technology Inc Web www.motiontek.ca THCSA200. Capacitive sensor plasma & Oxy-fuel Torch Height Control
THCSA200 Capacitive sensor plasma & Oxy-fuel Torch Height Control Features 1) Stand alone controller for THC & OHC completely independent from CNC computer software or CNC control system 2) closed-loop
More informationWaveguide Access Point WGA631. Product Guide
Waveguide Access Point Product Guide Waveguide Access Point Contents 1. Description............................ 3 2. Application............................ 3 3. Technical data... 4 4. Physical interfaces......................
More informationAPPLICATIONS. Semiautomatic Automation Hard Automation Heavy Equipment Transportation Fabrication FEATURES, CONT D. UNIT REQUIRES
ADVANCED PROCESS WELDERS Power Wave Processes Stick, TIG, MIG, Pulsed MIG, Flux-Cored, Tandem MIG, Carbon Arc Gouging Product Number K3279-1 Power Wave S700 S700 Input Power 380-415/440-460/500/575/3/50/60
More informationHERZ-Thermal Actuators
HERZ-Thermal Actuators Data Sheet 7708-7990, Issue 1011 Dimensions in mm 1 7710 00 1 7710 01 1 7711 18 1 7710 80 1 7710 81 1 7711 80 1 7711 81 1 7990 00 1 7980 00 1 7708 11 1 7708 10 1 7708 23 1 7709 01
More informationConlift1, Conlift2, Conlift2 ph+
GRUNDFOS DATA BOOKLET Conlift1, Conlift2, Conlift2 ph+ Small lifting stations 50 Hz CONLIFT1, CONLIFT2, CONLIFT2 ph+ Table of contents 1. Product overview 3 Conlift for condensate applications 3 Applications
More informationTELESCOPE Motorized Lighting Suspension
TELESCOPE Motorized Lighting Suspension Mod. 8400 FEATURES The De Sisti TELESCOPE is a single point suspension specifically designed to provide rigidity and stabilization of all moving parts. It can extend
More informationDisabled Toilet Alarm. Contractor Pack. Installation & Operating Instructions
Disabled Toilet Alarm Installation & Operating Contractor Pack Installation & Operating Instructions 1 Overview The Channel Safety Systems Disabled Toilet alarm contractor Packs are an efficient way of
More informationV3.2-12-2013 PREFAB WELDING PREFAB WELDING
SP121 ø12 - ø121 mm ø0,45 to ø4,5 '' Technical Specifications - Basic stainless steel jaws Ø 1 to 4,5 ( Ø 24 to Ø 121 mm ) - Additional stainless steel jaws Ø 0,45 to 4,25 (Ø12 to Ø108mm) - Electric rotation
More informationECOCIAT. Domestic hot water heat recovery unit
Heat recovery unit Domestic hot water High energy efficiency with R410A Compact and quiet Scroll compressors Brazed-plate heat exchangers Heating Heat recovery ENVIRONMENTALLY HFC R410A PROTECTION DE FRIENDLY
More informationAdsorption air dryers ADS 1 215
Adsorption air dryers ADS 25 INDUSTRY CUSTOMER SERVICE COMPRESSED AIR AIR INTAKE 20 C 70% UR 760 mm Hg 2 grh 2 O/m 3 AIR PRESSURE 0 bar COOLING SYSTEM 30 C 00% UR 0 bar 2,8 grh 2 O/m 3 A compressor that
More informationFIREDEX 2200. Conventional Fire Panels
68 Flexible, high specification system Choice of 1, 2, 4 or 8 zones Simple one-shot auto-reset user test facility Approved to EN54 Maintenance free poly switch circuit protection, with auto reset Class
More information1. Description. 2. List of Accessories included A B C F G H
1. Description This unit is a pump that will clear the waste from a domestic shower and washbasin. The unit will start automatically. Please pay particular attention to the following: Possible danger to
More informationDigital input modules
8 172 TX-I/O Digital input modules TXM1.8D TXM1.16D Two fully compatible versions: TXM1.8D: 8 inputs, each with a three-color LED (green, yellow or red) TXM1.16D: As TXM1.8X, but 16 inputs, each with a
More informationNew XUY roller sensors
Do you want to simplify the sensor integration in your conveyor systems? New XUY roller sensors for packet, boxes, letters on roller conveyors. Telemecanique Sensor s OsiSense TM XUY photoelectric sensors
More informationLoc-1Tx/Loc-5Tx/Loc-10Tx Data Sheet V3.3
Typical Applications Typical Applications Construction Transmitter Assembly Pipe & cable locator transmitter Transmitting active signals for the location of buried pipes and cables High impact ABS Weight
More informationZMR 80 STEREO MODULAR ZONER USERS MANUAL
ZMR 80 STEREO MODULAR ZONER USERS MANUAL Lime Technologies http://limetechnologies.co.uk Tel: 08712 233127 ZMR80 Stereo Modular Zoner Mixer Introduction The modular construction of the ZMR80 allows it
More informationCutMaster 102. 6.04 Major External Replacement Parts
CutMaster 0 6.04 Major External Replacement Parts Item # Qty Description Catalog # Cover with labels 9-08 Base Enclosure Assembly 9-086 Tube, roll handle 9-0 4 Front Panel 9-087 Rear Panel 9-00 4 Art #
More informationOZW30. Central Unit SYNERGYR
2 841 SYNERGYR Central Unit OZW30 Collects billing data from the apartments. Generates an image of each apartment's heat consumption and makes it available for readout. Acts on room temperature control
More informationHow To Control A Power Supply With A Mini Transmitter And Switch (Power Supply)
transmitter (2 wire) / switch for continuous or On/Off Control Indication, monitoring, transmitting and continuous or On/Off control in one device Output signal 4...20 ma, 2-wire for continuous control
More informationOPL BASIC. Dosing System for Professional Laundry machines. Contents
OPL BASIC Dosing System for Professional Laundry machines Contents 1 Getting Started. Page 2 2 Installation. Page 4 3 Set Up & Operation. Page 8 4 Maintenance & Accessories. Page 10 5 Troubleshooting Page
More informationElectronic Pressure Switch EDS 300
Electronic Pressure Switch EDS 300 User manual Page 2 of 16 Content 1. Functions of the EDS 300...3 2. Mounting...3 3. Operating keys on the membrane keypad...4 4. Digital display...4 5. Output function...5
More informationPlease also see 10 golden rules for correct Saniflo installation on www.saniflo.co.uk
1. Description Sanicom is a lifting pump for wastewater used in commercial applications (restaurants, hairdressing salons, the catering industry etc.). The unit operates automatically, has a high performance
More informationAssisted lift operated 2/2-way solenoid valves Type EV250B
MAKING MODERN LIVING POSSIBLE Data sheet Assisted lift operated 2/2-way solenoid valves Type EV250B EV250B with assisted lift can operate from zero and up to 10 bar differential pressure. This 2/2-way
More informationEVC40 EMERGENCY VOICE COMMUNICATION SYSTEM
EVC40 EMERGENCY VOICE COMMUNICATION SYSTEM INSTALLATION MANUAL Protec Fire Detection PLC, Protec House, Churchill Way, Nelson, Lancashire, BB9 6RT. Telephone: +44 (0) 1282 717171 Fax: +44 (0) 1282 717273
More informationImpact Testing Systems
The more intelligent solution... Impact Testing Systems The more intelligent solution... Tronjestraße 8, 44219 Dortmund Tel.: +49 231 912980 0 Fax.: +49 231 179855 www.coesfeld.com mail@coesfeld.com Introduction
More informationSVENSKA.......................................................3 DANSK.........................................................10 NORSK................
Caddy 150 & Caddy Tig 150 LHQ 150, LTV 150 SVENSKA.......................................................3 DANSK.........................................................10 NORSK.........................................................17
More informationDigital inductive conductivity transmitter
Digital inductive conductivity transmitter Optimal solution for conductivity measurements in difficult fluids (polluted, dirty,...) PEEK/PPA version for CIP applications Large range of process connections
More informationBMW Service Special tools and equipment New spot welding machine Multispot MI-100control BMW/MINI
Geschäftsleitung Management Service/Beratung Service/Reception Werkstatt Workshop Gewährleistung Warranty Teile und Zubehör Parts and Accessories Verkauf Sales Verantwortlich/Responsible: VS-14/Beyser
More informationSMART Board interactive flat panel with appliance Model 8055ie-SMP
Specifications SMART Board interactive flat panel with appliance Model 8055ie-SMP Physical specifications Size 52 3/8" W 32 5/16" H 3 11/16" D (133 cm 82 cm 9.3 cm) (See Physical dimensions on page 7 for
More informationCONTENTS. 1. CE DECLARATION OF CONFORMITY FOR MACHINES pag.11. 2. DESCRIPTION pag.12. 3. TECHNICAL SPECIFICATIONS pag.13. 4. INSTALLATION pag.
CONTENTS 1. CE DECLARATION OF CONFORMITY FOR MACHINES pag.11. DESCRIPTION pag.1 3. TECHNICAL SPECIFICATIONS pag.13 4. INSTALLATION pag.13 5. TESTING THE AUTOMATED SYSTEM pag.19 6. MANUAL OPERATION pag.19
More informationMICROSENS. Central 48 V DC Power Supplies for PoE-Components. Description. Features
Central 48 V DC Power Supplies for PoE-Components MICROSENS Description Active network equipment which is supporting the Power-over-Ethernet functions, typically requires a powerful 48 V DC power supply.
More informationATA TO IDE INTERFACE PC CARD DRIVES
ATA TO IDE INTERFACE PC CARD DRIVES 1 Front slot Support Type I/II/III ATA Flash, ATA HDD, Compact Flash Cards(an adaptor required) Operating Temperature: 0 o C- 70 o C 1 real slot Support Type I/II/III
More informationManual. Simrad StructureScan LSS-1 Sonar Module. English
Manual Simrad StructureScan LSS-1 Sonar Module English www.simrad-yachting.com A brand by Navico - Leader in Marine Electronics Disclaimer As Navico is continuously improving this product, we retain the
More information1 All safety instructions, warnings and operating instructions must be read first.
ONYX USER MANUAL 2 Dateq ONYX Manual Safety instructions EN Safety instructions 1 All safety instructions, warnings and operating instructions must be read first. 2 All warnings on the equipment must be
More informationIEC Connectors. Introduction
Introduction IEC Connectors A full range of quality mains rated inlets, outlets and connectors conforming to IEC and EN 60320 specifications carrying UL, CSA, VDE and other approvals. With electrical ratings
More informationTurbine Flow Sensor Series VTR
Turbine Flow Sensor Series VTR SIKA Turbine Flow Sensor Series VTR Extra robust, impressively precise SIKA s VTR turbine flow sensor allows you to determine precisely, dependably and easily the flow rates
More informationHMI display Installation Guide
HMI display Installation Guide Product Description Specifications Important Information o Package Contents o Related Documents o Accessories Cautions and Warnings Mounting and Dimensions o BAC-DIS-ENC
More informationSZI 1029. IR Audio Transmission Technology Modulators/Radiators
General Description The is a 5-W high-power radiator for use with all wideband and narrowband modulators. The radiator is automatically switched on by the RF carrier and can cover areas of up to 800 m
More informationREGULINE 600VA / 1000VA REGULATOR USER MANUAL
REGULINE 600VA / 1000VA REGULATOR USER MANUAL TUNÇMATİK REGULINE SERIES AUTOMATIC VOLTAGE REGULATOR Models: REGULINE 600VA / REGULINE 1000VA Principle of Operation Automatic Voltage Regulators regulate
More informationwilkinsonstar.com TIG 200P DC Pulse TIG / MMA Welding - Dual voltage Order code JT-200PDV OPERATOR MANUAL
wilkinsonstar.com TIG 200P DC Pulse TIG / MMA Welding - Dual voltage Order code JT-200PDV OPERATOR MANUAL Your new product Thank you for selecting this Jasic Technology, Wilkinson Star product. This product
More informationColor Mark Sensor with Red or Green LED E3S-VS
Color Mark Sensor with Red or Green LED Rugged IP67 Color Mark Sensor 1 ms response time Detects a wide variety of color marks PNP or NPN output ls Light-on/ Dark-on operation, wire selectable Vertical
More information162 CB CABLE TRACER. Filter Probe & Tone Generator INSTRUCTION MANUAL
162 CB CABLE TRACER Filter Probe & Tone Generator INSTRUCTION MANUAL INDEX PAGE 1. INTRODUCTION... 1 2. FILTER PROBE... 1-3 3. TONE GENERATOR... 3-6 4. SPECIFICATION... 7-8 5. MAINTENANCE... 8 1. INTRODUCTION
More informationActive Speaker System LX523 AUDAC PROFESSIONAL AUDIO EQUIPMENT. Active Speaker System with remote input LX523. User Manual & Installation Guide
Active Speaker System LX523 AUDAC PROFESSIONAL AUDIO EQUIPMENT Active Speaker System with remote input LX523 User Manual & Installation Guide AUDAC PROFESSIONAL AUDIO EQUIPMENT User Manual & Installation
More informationFeatures, Benefits, and Operation
Features, Benefits, and Operation 2014 Decibel Eleven Contents Introduction... 2 Features... 2 Rear Panel... 3 Connections... 3 Power... 3 MIDI... 3 Pedal Loops... 4 Example Connection Diagrams... 5,6
More informationModel PBX 308 System Administration Guide
Model PBX 308 System Administration Guide Introduction 4 Installation Hints 4 Wall Mounting System Programming 5 System Password Changing the Password IMPORTANT Exchange Lines 6 1 Exchange Line connected:
More informationBITMAIN. APW3-12-1600 PSU Series User Guide
BITMAIN APW3-12-1600 PSU Series User Guide Contents 1 Overview... 3 2 Features... 3 3 Specifications... 4 4 Switching On/Off Remotely... 5 5 Order Information & Wire Type... 6 5.1 Order Information...
More information14.5GHZ 2.2KW CW GENERATOR. GKP 22KP 14.5GHz WR62 3x400V
14.5GHZ 2.2KW CW GENERATOR GKP 22KP 14.5GHz WR62 3x400V UTILIZATION OF GKP 22KP GENERATOR With its characteristics of power stability whatever the load, very fast response time at a pulse, low ripple,
More informationCutMaster 82. 6.04 Major External Replacement Parts
CutMaster 8 6.0 Major External Replacement Parts Item # Qty Description Catalog # Cover with labels 9-08 Base Enclosure Assembly 9-08 Tube, roll handle 9-0 Front Panel 9-07 Rear Panel 9-00 Art # A-080
More informationLIEBERT VNSA Installation Sheet
LIEBERT VNSA Installation Sheet Description The Liebert vnsa network switch is designed for connecting multiple Ethernet-ready devices and comes in various models. The unit may have: A Liebert icom display
More informationModel PBX 308 Plus System Administration Guide
Model PBX 308 Plus System Administration Guide Introduction 3 Installation Hints 4 System Programming 5 IMPORTANT Exchange Lines 6 Assign Incoming calls to ring Nominated Extensions 7 Cascade Ringing Of
More informationDaker DK 1, 2, 3 kva. Manuel d installation Installation manual. Part. LE05334AC-07/13-01 GF
Daker DK 1, 2, 3 kva Manuel d installation Installation manual Part. LE05334AC-07/13-01 GF Daker DK 1, 2, 3 kva Index 1 Introduction 24 2 Conditions of use 24 3 LCD Panel 25 4 Installation 28 5 UPS communicator
More informationA project to optimise quality and energy efficiency must include metering
EMDX 3 : Energy Metering A project to optimise quality and energy efficiency must include metering Metering upstream identifies the critical points and ensures optimum targeting of the actions to be taken,
More informationElectronic pressure switch with display Model PSD-30, standard version Model PSD-31, with flush diaphragm
Electronic pressure measurement Electronic pressure switch with display Model PSD-30, standard version Model PSD-31, with flush diaphragm WIKA data sheet PE 81.67 Applications Machine tools Hydraulics
More informationCable Plug acc. to DIN EN 175301-803, Form A
Cable Plug acc. to DIN EN 175301-803, Form A Complete program Contact form 18 mm Also available with LED indicator Optional 4-pin version for pressure switch or impulse valves respectively Versions with
More informationTechnical data. General specifications. Indicators/operating means. 30 Hz Multiplex operation 30 Hz / n, n = number of sensors, n 5
Model Number Single head system Features Parameterization interface for the application-specific adjustment of the sensor setting via the service program ULTRA 000 programmable switch outputs Hysteresis
More informationRAILWAY CATENARY SYSTEMS. Components and Systems for the Electrification of Railway Lines. ibemo
Connectors, Clamps, Compensating Devices, Insulators and Safety Equipment for Overhead Catenary Lines RAILWAY CATENARY SYSTEMS Components and Systems for the Electrification of Railway Lines. Welcome to
More informationHeating Controller. Building Technologies HVAC Products
2 474 Heating Controller RVP300 Multifunctional heating controller for use in residential and non-residential buildings; suitable for weather-dependent flow temperature control of heating zones with or
More informationType: DILM115(RAC240) Article No.: 239548 Sales text Contactor,55kW/400V,AC operated. Ordering information
Type: DILM115(RAC240) Article No.: 239548 Sales text Contactor,55kW/400V,AC operated Ordering information Connection technique Description Description Rated operational current Screw terminals 3 pole AC
More informationLinear Luminaire for Fluorescent Lamps Series EXLUX 6001
> As wall, ceiling and pendant light fitting or side entry lamp > Version with 2 lamps: 18 W, 36 W and 58 W > Central locking > All-pole disconnection by means of an N/C switch when the lamp is opened
More informationStructureScan HD Module. Installation Guide ENGLISH. www.bandg.com www.simrad-yachting.com www.lowrance.com
StructureScan HD Module Installation Guide ENGLISH www.bandg.com www.simrad-yachting.com www.lowrance.com Disclaimer As Navico is continuously improving this product, we retain the right to make changes
More informationOutdoor 33.6W Dual Port Passive Power-over-Ethernet Midspan For External Security Cameras and Wireless Access Points
Outdoor 33.6W Dual Port Passive Power-over-Ethernet Midspan For External Security Cameras and Wireless Access Points Features SELV Compliant No Detection Passive Injector Gigabit Compatible Full Protection
More informationRM17TE 183...528 V AC. Main. Product or component type. Product specific application. Relay monitored parameters 250 V DC 5 A DC
Characteristics multifunction control relay RM17-TE - range 183..528 V AC Complementary Reset time Maximum switching voltage Minimum switching current Maximum switching current [Us] rated supply voltage
More informationDifferential Pressure Sensors for air and non-corrosive gases, with calibration certificate
1 919 1919P01 1919P03 QBM65/C, QBM75-1U/C Differential Pressure Sensors for air and non-corrosive gases, with calibration certificate QBM751-1/C QBM65/C QBM75/C Highly accurate measurements with calibration
More information- mark gas burners Cuenotherm NC.4 - NC.6 - NC.9 14.5-90kW.
- mark gas burners Cuenotherm NC.4 - NC.6 - NC.9 14.5-9kW. Low NO x Comprehensive control panel Gas rack Low NOx combustion head Strong light alloy pressuremoulded housing Electronic ignition transformer
More informationEXPLOSION-PROOF EMERGENCY LIGHTING FIXTURE FOR FLUORESCENT LAMP EVF-..-EL SERIES
EXPLOSION-PROOF EMERGENCY LIGHTING FIXTURE FOR FLUORESCENT LAMP EVF-..-EL SERIES Gas explosion protection II 2G Ex d IIC T6 Gb (suitable for Zone1 and Zone 2) Dust explosion protection II 2D Ex tb IIIC
More informationT 3000. Substation Maintenance and Commissioning Test Equipment
T 3000 Substation Maintenance and Commissioning Test Equipment Multi function system for testing substation equipment such as: current, voltage and power transformers, all type of protection relays, energy
More informationATTENTION This is a general warning that failure to follow instructions could result in poor functioning of the unit.
1. Description The macerating system of this unit is installed in a case, specifically designed for horizontal outlet spigots. This macerator is manufactured in a factory which is quality certified to
More informationTechnical Data. Dimensions
0102 Model Number Features 15 mm quasi flush Usable up to SIL2 acc. to IEC 61508 Accessories BF 30 Mounting flange, 30 mm V1-G-N-2M-PUR Female cordset, M12, 2-pin, NAMUR, PUR cable V1-W-N-2M-PUR Female
More informationContactless Encoder RI360P0-QR24M0-INCRX2-H1181
Compact, rugged housing Many mounting possibilities Status displayed via LED Immune to electromagnetic interference 1024 pulses per revolution (default) 360, 512, 1000, 1024, 2048, 2500, 3600, 4096, parametr.
More informationHEAT MONITORING AND CONTROL INSTRUMENTS FOR TRANSFORMERS MB 103 TEMPERATURE CONTROL UNIT PT 100 TEMPERATURE SENSOR
HEAT MONITORING AND CONTROL INSTRUMENTS FOR TRANSFORMERS MB 103 TEMPERATURE CONTROL UNIT PT 100 TEMPERATURE SENSOR 2 MB 103 TRANSFORMER TEMPERATURE CONTROL UNIT WITH CONTROL SIGNAL Recent approval of new
More informationCatalogue Wilo- Stratos PARA
Heating, ir Condition, Cooling, Geothermal heat, Solar heat 25-50W 100W 200W Catalogue Wilo- Stratos PR Wilo-Stratos PR 15/1-5; 20/1-5; 25/1-5; 30/1-5 Wilo-Stratos PR 15/1-7; 20/1-7; 25/1-7; 30/1-7 Wilo-Stratos
More informationTS-770 SERIES CONFERENCE SYSTEM
TS-770 SERIES CONFERENCE SYSTEM TOA Conference System with easy installation, use and expansion, plus remote participation capability Compact, high-performance conference system with clear sound and remote
More informationThe TransCut 300 plasma cutting system - Plasmacutting with liquid working medium
The TransCut 300 plasma cutting system - Plasmacutting with liquid working medium Speaker Sector Company Street Town Excellent portability with the TransCut 300 plasma cutting system Compact, portable
More informationXUSL4E4BB091NS2 XUSL type 4 - Slave2 - For body protection - 4 Beams, Hp = 910 mm
Characteristics XUSL type 4 - Slave2 - For body protection - 4 Beams, Hp = 910 mm Complementary Detection system Kit composition [EAA] effective aperture angle Emission Main Range of product Product or
More informationMureva Assembly surface mounted wiring devices
1.0 Waterproof Assembly surface Switches P124543 P124547 External dimensions : 72 x 72 x 47 mm.. Assembly surface rockers become illuminated using bulbs and indicators in option. They can carry a label
More informationTechnical data. General specifications. Indicators/operating means. Electrical specifications Operating voltage U B Power consumption P 0 Interface
Release date: 06-0- 09: Date of issue: 06-0- 009_eng.xml Model Number Single head system Features Parameterization interface for the application-specific adjustment of the sensor setting via the service
More informationElectronic Control Devices The European Product Catalogue 2007
FX14 Field Controller (1/4) FX14 Field Controller The FX14 is an equipment field controller in the Facility Explorer range of products. The controller is designed specifically for commercial Heating, Ventilating,
More informationELECTROMAGNETIC FLOWMETER COMPACT
R ELECTROMAGNETIC FLOWMETER COMPACT For conductivit Liquids MIK frequency-, switching-, analog otput digital plug on display Range from liquids, acids and caustic solutions:0.01-0.5...35-7000l/min Accuracy:
More informationwww.sebury.com.cn Digital Keypad Use s Manual
K3 K4 www.sebury.com.cn Digital Keypad Use s Manual Contents Introduction Introduction Specifications Intramural Interface Circuit 3 Mounting 3 Wiring 5 Power UP 7 Engineer Programming Mode 7 The K3/K4
More informationAVL FUEL MASS FLOW METER & FUEL TEMPERATURE CONTROL
FUEL CONSUMPTION MEASUREMENT AVL FUEL MASS FLOW METER & FUEL TEMPERATURE CONTROL Description The combination of AVL Fuel Mass Flow Meter and AVL Fuel Temperature Control is a high precise and continuous
More informationSTT -10 WIRE FEEDER. For Surface Tension Transfer TM. Process
STT -10 WIRE FEEDER For Surface Tension Transfer TM Process STT -10 WIRE FEEDER ADVANTAGE LINCOLN The STT-10 does a lot more than just feed wire. This new generation microprocessor controlled wire feeder
More information