(db) S Series (Straight Through) Video Port: No Patch. Video Port:

Transcription

1 75 Video Patchbays 75 Video Patchbays G-ready HD-SDI video patchbays featuring Canare s uniquely-developed rotary switches. Panel Size Loaded Video Jacks 2DV 1U 2 x 2DVS 1U 2 x DVJB-S 2DV-2U 2U 2 x 2DVS-2U 2U 2 x DVJB-S 24DV 1U 24 x 24DVS 1U 24 x DVJB-S 24DV-2U 2U 24 x 24DVS-2U 2U 24 x DVJB-S 26DV 1U 26 x 26DVS 1U 26 x DVJB-S 26DV-2U 2U 26 x 26DVS-2U 2U 26 x DVJB-S *Colors other than black are available on custom-made basis. (See page 65) DV 15.9 WILL VOID WAANTY 75 s DVJB-S VJ-DC Straight Through Dust Cap for Video Jack (color: black 4pcs) Key Features and Benefits otary switch has been improved for superior isolatinon. Also usable as digital audio patchbay. Can be recessed mm. Wide designation strip (2U type). Lightweight aluminum alloy video jacks SMPTE424M SMPTE424M (GHz) (GHz) Patch Through eturn loss for (GHz) Isolation eturn Loss & Isolation DVJB-S eturn Loss BNC-BNC: BNC-VIDEO: Patch Through 26dB or greater (~75MHz) 2dB or greater (~2.4GHz) 1dB or greater (~.GHz) 26dB or greater (~75MHz) N/A 2dB or greater (~2.4GHz) 1dB or greater (~.GHz) BNC-Self Termination 26dB or greater (~75MHz) 2dB or greater (~1.5GHz) 1dB or greater (~.GHz) Isolation 5dB or greater (~1.5GHz) 2dB or greater (~.GHz) 5dB or greater (~1.5GHz) 2dB or greater (~.GHz) Technical Note otary Switch Technology and Signal outing Chart At the heart of the video jack is an independently-developed rotary switch which has been specially designed for use with high frequency signals. It features dual-contact construction for improved contact stability. W Series () S Series (Straight Through) No Patch Signal thru as Arrowed Signal routes between top and bottom BNC without the use of Video plugs. No Patch Two independent single jacks in a Both Signal Terminated dual housing. Patch Upper Patch Lower Patch Both Lower Terminated Upper Terminated Signal thru as Arrowed Inserting a Video Patch Cord into front upper port automatically terminates signal path into the lower 75 load. Inserting a Video Patch Cord into front lower port automatically terminates signal path into the upper 75 load. Inserting Video Patch Cords into both front ports inputs and/or outputs signal. Patch Upper Patch Lower Patch Both Lower Terminated Upper Terminated Signal thru as Arrowed Inserting a Video Patch Cord into front upper port automatically terminates signal path into the lower 75 load. Inserting a Video Patch Cord into front lower port automatically terminates signal path into the upper 75 load. Inserting Video Patch Cords into both front ports inputs and/or outputs signal. 62

2 75 Mid-size Video Patchbays 75 Staggered Mid-size Video Patchbays G-ready mid-size video jacks allow for more efficient use of rack space. Panel Size Loaded Video Jacks 2MD-ST 1U 2 x MDVJ-S 2MD-STS 1U 2 x MDVJ-STS 2MD-ST-2U 2U 2 x MDVJ-S 2MD-STS-2U 2U 2 x MDVJ-STS 2MD-ST-4U 4U 96 x MDVJ-S 2MD-STS-4U 4U 96 x MDVJ-STS *Colors other than black are available on custom model basis except 4U type (See page 65). 75 Staggered Mid-size Video Jacks MDVJ-S MDVJ-STS MVJ-DC Staggered Mid-size Video Jack, Staggered Mid-size Video Jack, Straight Through Dust cap for Mid-size video Jack (color: black 4pcs) Key Features and Benefits 2 channels of I/O into 1U or 2U, 96 channels of I/O into 4U. otary switch has been improved for superior isolation. Can be recessed mm (1U, 2U type). Wide designation strip (2U, 4U type). Lightweight aluminum alloy video jacks. Industry standard BNC plugs can be used. Note : Be sure to use with Mini-Weco video plug SMPTE 424M (GHz) eturn Loss & Isolation MDVJ-S MDVJ-STS SMPTE 424M (GHz) Patch Through (Long BNC port) eturn loss for MDVJ-S t MDVJ-S WILL VOID WAANTY SMPTE 424M 2MD-ST-4U (GHz) Patch Through (Short BNC port) eturn Loss BNC-BNC: BNC-VIDEO: Patch Through BNC-Self Termination 26dB or greater (~75MHz) 2dB or greater (~2.4GHz) 1dB or greater (~.GHz) 26dB or greater (~75MHz) 26dB or greater (~75MHz) N/A 2dB or greater (~2.4GHz) 2dB or greater (~1.5GHz) 1dB or greater (~.GHz) 1dB or greater (~.GHz) 2MD-STS (GHz) Isolation Isolation 5dB or greater (~1.5GHz) 2dB or greater (~.GHz) 5dB or greater (~1.5GHz) 2dB or greater (~.GHz) 15.9 Fiber-Optic Systems Connectors Cables Panels & Patchbays Mutichannel Systems Cable Assemblies 6

3 Video Plugs Video Plug (W.E.Standard) Suitable Cable Boot Die Set VWP-C4A LV-61S, G-59B/U, Belden 8241, 8279, 241 CB4 TCD-451CA TCD-4CA Standard Package (2pcs) Gold-plated center contact resists deterioration over years of use. Solder center contact and crimp sleeve. VWP-C4A Be sure to use Canare crimping tool for installing connectors on cables. VWP-C4A Video Patch Cord (see page 77) Mini-WECO Video Plug Suitable Cable Boot Die Set MVP-C4 LV-61S, G-59B/U, Belden 8241, 8279, 241 CB TCD-451CA TCD-4CA Standard Package (2pcs) MVP-C4 eturn loss: 26 db or greater (DC - 1.5GHz), 2dB or greater (DC - 2.4GHz). Gold-plated center contact resists deterioration over years of use. Solder center contact and crimp sleeve Be sure to use Canare crimping tool for installing connectors on cables. MVP-C4 Mini-Weco Video Patch Cord (see page 77) Video Conversion Connectors BCJ-VWP BNC (female) - Video plug (W.E.Standard) BCJ-VWP BCJ-MVP BNC (female) - Mini-WECO Video plug Standard Package: BCJ-VWP (1pcs), BCJ-MVP (1pcs) Note: BCJ-MVP is recommended to use with Slim BNC plug BCJ-MVP BCJ-VWP BCJ-MVP 64

4 S S 75 WILL VOID WAANTY 75 WILL VOID WAANTY 75 WILL VOID WAANTY Ordering Information Ordering Information 2DV (1U) Number of Video Jacks 2 2pcs 24 24pcs 26 26pcs Circuit Type Blank S Straight Through Circuit Type Blank S Straight Through (126.8) (2.2) Standard Video Patchbays 26 DV S - 5-2U Mid-size Video Patchbays 2 MD - ST S - 1-2U Note: 1) 4U type is available in black color only 2) 4U type can not be recessed. Designation Strip Dimensions 1U: 426mm x 6.2mm 2U: 42mm x 18.4mm 4U: 41.8mm x 1.2mm 2MD-ST-2U (424) ack Unit (height) Blank 1U 2U 2U Panel Color Blank Black 1 Brown 2 ed Orange 4 Yellow 5 Green 6 Blue 7 Purple 8 Gray 9 White ack Unit (height) & Number of Video Jacks Blank 1U, 2 Jacks 2U 2U, 2 Jacks 4U 4U, 96 Jacks Panel Color Blank Black 1 Brown 2 ed Orange 4 Yellow 5 Green 6 Blue 7 Purple 8 Gray 9 White (126.8) (7.4) (7.4) (2.2) (1.) x1(oval) 2 24DV (1U) x DV-2U (2U) (.6) 4-7x1 (7.4) 16 2MD-ST 4-7x1 2MD-ST-4U (424) (1.5) MDVJ-S MDVJ-S Fiber-Optic Systems Connectors Cables Panels & Patchbays Mutichannel Systems Cable Assemblies 4-7x MDVJ-S 65

5 Unloaded Video Jack Panels, S422 Patchbays Unloaded Video Jack Panels VJ2-V24-1U-BLK Panel Size VJ2-V2-1U-*** 1U 2ch (4 holes), for DVJB VJ2-V2-2U-*** 2U 2ch (4 holes), for DVJB VJ2-V24-1U-*** 1U 24ch (48 holes), for DVJB VJ2-V24-2U-*** 2U 24ch (48 holes), for DVJB VJ2-V26-1U-*** 1U 26ch (52 holes), for DVJB VJ2-V26-2U-*** 2U 26ch (52 holes), for DVJB MJ2-M2-1U-*** 1U 2ch (64 holes), for MDVJ MJ2-M2-2U-*** 2U 2ch (64 holes), for MDVJ VJ2-M2-4U 4U 96ch ( x 2ch, 192 holes), for MDVJ (Color: Black) (7.6) MJ2-M2-2U-BLK *** : Please see the following ordering information for complete model number. <Ordering Information> (2) 424 Panel Size 1U 2U 4U 1U 2U 4U Coding Ex. VJ2 - V2-2U - BLK Color Codes BLK Black BN Brown ED ed OG Orange YEL Yellow GN Green BLU Blue PPL Purple GY Gray WHT White (.6) x1 VJ2-M2-4U (1.5) S422 Patchbays 41.8 Panel Size Connectors Front Panel ear Panel S-422-1U-16 1U Bantam D sub 9P(F) 16 S-422-1U-24 1U Bantam D sub 9P(F) 24 S-422-2U-2 2U Bantam D sub 9P(F) 2 S-422-2U-48 2U Bantam D sub 9P(F) 48 The S422 serial signal used for VT remote applications can now be switched with Bantam patchbay ease. D sub screws are M2.6 * Listed above items are other manufacturer s products. S-422-2U-48 BANTAM jack Dsub 9P(F) A A1 B B S422 Patch Cord (See page 8) S-422-1U-24 S-422-2U-48 66

6 Connector Panels Pre-Loaded A/V Connector Panels Key Features and Benefits Isolated BNC, CA, F, XL on same panel Clear plastic cover, full screen desi-strip XL Connector Panels 161U-X12F 162U-X21 BNC Connector Panels 161U-JU Type Panel Size Loaded Connector Panel P/N 1U 2U Dimensions (mm) 161U-X1F XL-1F77 (16pcs) 44 x x U-X2F XL-2F77 (16pcs) 44 x x U-AS1 161U-X12F XL-1F77 (8pcs, Left) XL-2F77 (8pcs, ight) 44 x x U-B1 NCFD-LX-B (16pcs) 44 x x 1. 1U-AS1D 161U-B2 NCMD-LX-B (16pcs) 44 x x U-X21 162U-X22 XJM-PFA (16pcs, Upper ow) XJF-PMA (16pcs, Lower ow) 2U-AS7.1 x x 217 XJM-PFA (2pcs, 2rows) Type Panel Size Loaded Connector Panel P/N XL Panel Mount Adapters 1U Front ear XJM-PFA XL pin (M) XL pin (F) XJM-PMA XL pin (M) XL pin (M) XJF-PFA XL pin (F) XL pin (F) XJF-PMA XL pin (F) XL pin (M) XJ series are XL full compatible. XL jack to jack extremely reduce installation hours ±.2 ±.5 2 ±.2 ± ±.2 Blank Panels 2.5 ±. (65.77) BP-DXF Easy and quick snap-on mounting without any tools Can be used for both ITT XL-F77 and Neutrik D holes Note: Panel thickness range: t1.2 to t mm 1 Dimensions (mm) 161U-JU BCJ-JU (16pcs) 1U-AS1 44 x x U-JUDB BCJ-JUDB (16pcs) 1U-AS1D 44 x x U 162U-JU BCJ-JU (2pcs, 2rows) 2U-AS7.1 x x ±.2 ±.5 2 ±.2 ± ±.2 Flange Type ITT XL-F ±. (59.4) Variety of panel options Most popular panel holes XL F-77 and Neutrik D available PUSH ±.2 ±.5 2 ±.2 ± ± ±. (75.87) BP-DXF XJF-PMA XJM-PMA ±.2 ±.5 2 ±.2 ± ±.2 BP-XF 2.5 ±. (69.) XJM-PFA XJM-PMA XJF-PFA XJF-PMA BP-DXF (2pcs) Snap-on blank panels for both ITT XL-F77/Neutrik D holes BP-XF (1pcs) Blank panels for ITT XL-F77 hole with screws BP-D (1pcs) Blank panels for Neutrik D hole with screws 67 Fiber-Optic Systems Connectors Cables Panels & Patchbays Mutichannel Systems Cable Assemblies

7 Connector Panels Custom A/V Connector Panels Individual Panels Panel Type AS1 (D) AS (D) AS5 (D) AS7 (D) Variable panel Variable panel Flat panel Flat panel w/cable tie bar w/cable tie bar w/cable tie bar short type Long type 1U-AS1 (D) 1U-AS (D) 1U-AS5 (D) 1U-AS7 (D) 1U 16 holes x 1 row Depth (mm) U-AS1 (D) 2U-AS (D) 2U-AS5 (D) 2U-AS7 (D) 2U 16 holes x 2 rows Depth (mm) U-AS1 (D) U-AS (D) U-AS5 (D) U-AS7 (D) U 16 holes x rows Depth (mm) A) ear Panel N/A N/A B) Box Type N/A N/A N/A C) ecessed N/A N/A Panel Height, Number of holes and ows 1U 1U, 16holes, 1row 2U 2U, 2holes, 2rows U U, 48holes, rows Ordering Information 1U - AS D Hole Type Blank ITT XL-F77 Type D Neutrik D Type Panel Type AS1 Flat panel AS Flat panel w/cable tie bar AS5 Variable panel w/ cable tie bar - short depth AS7 Variable panel w/ cable tie bar - long depth Connectors Canare Flush-mount BNC, F, CA and XL (ITT XL-F77 or Neutrik D type) are available. Options A) ear Panel A connector panel can be mounted on the rear. B) Box Type A connector panel, top plate and bottom plate can be mounted on the rear. C) ecessed The panel can be recessed mm by changing the screw positions of the mounting brackets and can be recessed either 5mm or 75mm by changing the mounting brackets to M-MA*U2. Examples of Custom-Made Connector Panels 1U-AS + XL-1F U-AS7 + XL-2F77 16 XL-1F U-AS7 (box type) Connectors can be mounted on the both side. elated Products M-MA1U2 M-MA2U2 M-MAU2 DS1-AS4 1U mounting brakets for a Variable panel, 2 pcs. (left and right) 2U mounting brakets for a Variable panel, 2 pcs. (left and right) U mounting brakets for a Variable panel, 2 pcs. (left and right) Designation strip for Canare A/V connector panels, 2 pcs. NOTE: Cable tie bars cannot be installed when a rear connector panel is mounted. Depending on their length, some connectors can not be mounted on the panel with a cable tie bar installed. 68

8 Audio Patchbays Audio Patchbays The gold alloy cross bar contact, which features a low faulty contact rate, is used for the jacks. 481U patchbay can be recessed mm by changing the screw positions on the mounting brackets. Connector 481U-82AQ Bantam Patchbay 82AQ 96 Connector 48-12A/82AQ/EIA Bantam Patchbay 82AQ A/62A/EIA Skini Patchbay 62A A/2A/EIA Maxi Patchbay 2A 52 * Listed above items are other manufacturer s products. Audio Patchbays elated Products 2A 62A 82AQ ABJ-DC NPTMC-B PJ74 PJ748 6AQ PH5-A PH5-B DS1-AS1 DS1-AS2 DS1-AS Maxi Jack Skini Jack Bantam Jack Bantam Jack Dust Cap (1pcs/pkg) Maxi/Skini Plug Bantam Termination Plug (6 ) Bantam Dummy Plug Polysand for PJ74 Maxi/Skini/Video Patch Cord Holder Bantam Patch Cord Holder Designation Strip for Bantam (2pcs.) Designation Strip for Skini (2pcs.) Designation Strip for Maxi (2pcs.) * Listed above items are other manufacturer s products. Technical Note <Wiring formats connecting upper and lower connectors> F: Full normal connection Output jack Input jack Upper row Lower row (Cross bar contact) Top view (Conventional from) Top view Full Normal Format (series) The upper (output) row is connected to the lower row (input) in the state when a plug is not inserted. When a plug is inserted in the upper jack to obtain a signal, the signal is not connected to the lower jack. A signal can be entered by inserting a plug in the lower jack. In this case the signal is not connected to the upper jack. Bantam Jack 82AQ Skini Jack 62A Maxi Jack 2A Bantam patch panel 481U-82AQ Bantam patch panel 48-12A/82AQ/EIA 481U-82AQ 2-12A/62A/EIA Panel Hole Dimensions Panel Hole Dimensions Panel Hole Dimensions BC * M (See page 81 for patch cords.) 48-12A/82AQ/EIA 612A/2A/EIA Patch Cord Holder Capable up to 5 patch cords. Easy to install on the wall or side of rack. PH5-A for Maxi/Skini, Video cords. PH5-B for Bantam cords. Polysand 6AQ (for PJ74) Quickly and effectively removes oxide on brass plugs. Comes in 286x15mm size. Audio Patchbay Normaling s Output from a device is obtained from the upper row, while input to a device is normally connected to the lower row. Users can select from the following three types of connecting functions. H: Half normal connection Output jack Input jack Upper row Lower row ±.8 M2.5 or M2.6 (flat head) Half Normal Format (half-parallel) The upper (output) row is connected to the lower row (input) in the state when a plug is not inserted. When a plug is inserted in the upper jack to obtain a signal, the signal is connected to the lower jack. This format allows the signal to be obtained in parallel. The signal can be prevented from going to the lower jack by inserting a dummy plug. Signals are input by inserting a plug in the lower jack. In this case the signal is not connected to the upper jack. 6.4 ±.1 M (flat head) 7.9±.1 8.8±.8 M (round head) 9.5± ±.8 W: Double normal connection Output jack Input jack Upper row Lower row Double Normal Format (series-parallel) The upper (output) row is connected to the lower row (input) in the state when a plug is not inserted. When a plug is inserted in the upper jack to obtain a signal, the signal is connected to the lower jack. This format allows the signal to be obtained in parallel. The signal can be prevented from going to the lower jack by inserting a dummy plug. A signal can be entered by inserting another plug in the lower jack. Note that the signal in this case is connected to the upper jack. This can be prevented by inserting a dummy plug. Fiber-Optic Systems Connectors Cables Panels & Patchbays Mutichannel Systems Cable Assemblies 69

9 Audio Patchbays Wired Box Type Size Bantam Skini Maxi *481U-WB* can be recessed mm *9-62 connector is identical to ELCO V connector Connector Front ear 481U-WBF 1U 82AQ U-WBH 1U 82AQ U-WBW 1U 82AQ U-WBS 1U 82AQ WB-F 1U 82AQ WB-H 1U 82AQ WB-W 1U 82AQ WB-F 1U 62A WB-H 1U 62A WB-W 1U 62A WB-F 1U 2A WB-H 1U 2A WB-W 1U 2A Bantam wired box 481U-WB* Bantam wired box 48WB-* Maxi wired box 26WB-* 9-62 Wired Panels Type Bantam Skini Panel 1 Panel 2 Size Connector Size Connector 48XP-F 1U 82AQ 96 U 2 48XP-H 1U 82AQ 96 U 2 48XP-W 1U 82AQ 96 U 2 2XP-F 1U 62A 64 4U 2XP-H 1U 62A 64 4U XL-1F77 48 XL-2F77 48 XL-1F77 48 XL-2F77 48 XL-1F77 48 XL-2F77 48 XL-1F77 2 XL-2F77 2 XL-1F77 2 XL-2F77 2 XL-1F77 2 2XP-W 1U 62A 64 4U XL-2F77 2 *Cables are 2 meters in length. Skini wired panel 2XP-* Normaling Options F: Full normal 481U-WB* H: Half normal 48WB-* W: Double normal 48XP-* S: Single (No normal) TC**B (See page 77 for patch cords) 9-62 Connector Format (Wired box) <ear panel> Bantam Lower row ~48ch Upper row ~48ch Lower row 1~24ch Upper row 1~24ch Skini Lower row 17~2ch Upper row 17~2ch Lower row 1~16ch Upper row 1~16ch Maxi Lower row 14~26ch Upper row 14~26ch Lower row 1~1ch Upper row 1~1ch 9-62 connector is mated with 9-68 connector requires either 1 or 5 contact and 9-T cover for assembling. <Wired box side> <Cable side> ( V) ( V) 1 : Solder type ( ) Contact 5 : Crimp type ( ) Cover 9-T : Top entrance ( T) *The numbers in parentheses are ELCO ordering codes. ** Contact extraction tool: Crimping pliers for 5: (AWG#18), (AWG#2-#22), (AWG#24-#26). Wiring Table for 9-62 Channel no. Maxi Skini Bantam SHIELD A H B J S C K T D L U E M V F N W X AE AM Y AF AN Z AH AP AA AJ A AB AK AS AC AL AT BJ BS BY BK BT BZ BL BU CA BM BV CB BN BW CC BP BX CD 19 4 CF CN CW 2 44 CH CP CX CJ C CY CK CS CZ 2 47 CL CT DA CM CU DB 7