Advanced hotel systems

Transcription

1 Advanced hotel systems

2 AVE Since 1904, the days of my great grandfather, we have been key players in uncountable technological evolutions. However, 2008 definitely marked a turning point, the beginning of a new era. The object you are holding in your hands right now is the fruit of a journey characterised by research, innovation, investments and passion which bore DOMINA HOTEL. DOMINA HOTEL marks an important development with respect to hotel industry standards. DOMINA HOTEL represents cutting-edge research solutions and advanced design flexibly fully meeting hotel management needs ranging from small hotels to the large multinational hotel chains. An Ave tagged revolution, I am proud to say, entirely made in Italy. Welcome to Ave. Dott. Alessandro Belli President of AVE s.p.a. 2

3 A totally innovative solution based on invisible modules sensitive to touching the surface of the glass plate, provided with LEDs and tactile sensors. pag 4 Series characterised by design evolution and various technological features, available in a wide range of aesthetic properties. pag 8 Series conceived in the spirit of traditional and functional design, with technological solutions suitable for any environment, currently incorporating all System 44 innovations. Technical catalogue pag 10 pag 14 3

4 AVE patents n AVE TOUCH Just one touch to step into a new era, the past fades away, simply outlived. Ave Touch comes in an awesome range of products adorning the most advanced technology with physical beauty, tactile. Ave touch obeys your orders, turning dreams into desires. Touch, listen and watch the environment you yearned for finally takes shape. AVE TOUCH With sliding cover for sockets AVE TOUCH Sign with graphic step-marker function, interchangeable and customizable with hotel logo. 4

5 Customizable room access client card. AVE TOUCH 3+3 With room transponder reader customizable with room number and hotel logo 5

6 AVE patents n AVE TOUCH switches With interchangeable and customizable symbols Customizable with hotel logo AVE TOUCH signs With interchangeable and customizable symbols Customizable with hotel logo 6

7 AVE TOUCH Wall-lined installation A special box allows perfect wall-lined installation, leaving only the magnificent Ave Touch surface exposed. AVE TOUCH switches With regulation of sensitivity to touch Customizable with hotel logo 7

8 AVE patents n 196 LIFE 44 Choice and appreciation are innate traits of human beings. Ave Life 44 meets this need by combining technology with design and selected materials. An authentic treat for your eyes. LIFE 44 Extractable emergency lamp Glass VERA 44 front plate customizable with hotel logo 8

9 Switches Fibre optics illuminated frame Glass VERA 44 front plate Ideal combination with AVE TOUCH devices Customizable with hotel logo. The glass plate that ushers a touch of elegance into any room. Metal ZAMA 44 front plate Paintable and customizable with hotel logo. Classy frame for breathtaking environments. LIFE 44 Electronic thermostat 9

10 AVE patents n 196 Switches PERSONAL 44 front plate customizable with software Programmable thermostat 10

11 External sign PERSONAL 44 front plate Customizable with software Sockets PERSONAL 44 front plate customizable with software 11

12 Brevetti AVE n DOMUS 100 Gratifying simplicity. Combining a wide range of colours and functionalities DOMUS 100 is the perfect key to a lively and blissful system. Step-marker PERSONAL 44 front plate customizable with software Personal 44 with modern design, comes in a wide range of technological colours and with mirror effect, also available in transparent version with customizable graphic and colours. Graphic customization may also be performed by the end client by means of a software available at our website www. ave.it free of charge. Extractable emergency lamp Glass VERA 44 front plate customizable with hotel logo Switch Metal ZAMA 44 front plate Customizable with hotel logo 12

13 Dimmer 44 MOULDED front plate Customizable with hotel logo 44 Moulded suitable for any environment, it also incorporates all the System 44 innovations. Consumer unit Coordinated with the System 44 front platess Customizable with hotel logo VERA 44 for round box Best for restoration Customizable with hotel logo Shaver socket Glass VERA 44 front plate Customizable with hotel logo 13

14 14

15 Elettricità Evoluta dal 1904 Technical catalogue contents Stand-alone system: 125kHz technology... page 20 MIFARE technology... page kHz and MIFARE technology common products... page 32 Network system: MIFARE technology... page 38 Network and stand-alone systems common products... page 48 Codes summary: Stand-alone system... page 52 Network system... page 53 Compatibility with S45... page 54 Installation examples: Stand-alone systems... page 58 network systems... page 62 Hotel room radio components... page 66 Electrical Schematics... page 70 15

16 Domina Hotel, one system RELIABILITY AVE hotel system is not just about aesthetic, it is also reliability. Each room can be monitored by a central computer at the reception. However, in case of computer failure, the whole system operates as usual, losing only the remote room monitoring while awaiting repair of the failure. The system is at its best when it operates in its entirety but each device continues operating independently even in case of failure of the other components. Furthermore, the islands system, wherein each room not only operates independently but is also connected to the main network, ensures that no independent failure brings the entire hotel system to a standstill. TECHNOLOGY AVE hotel management products use the contactless Mifare and 125kHz technology. The access cards are entirely safe and clone-proof thus leaving you and your clients entirely sure that no ill-intentioned person will have an easy time in your premises. The possibility to integrate e-money systems (not provided by AVE) allows you to offer your clients an entirely new range of services, accessible through the same card which shall also serve as a payment system. AESTHETIC TOUCH: The plates are entirely customizable and configurable to suit your needs. Furthermore, they can bear, depending on the model, your hotel logo, room number and any other indication adding a personalised and unique classy touch to your hotel. Plates and devices made of various material and finishing are available. 16

17 Elettricità Evoluta dal 1904 for all hotel needs EFFICIENCY AND ENERGY SAVING Constant monitoring from the reception shall keep you constantly informed, allowing you to intervene promptly to curb poor quality services. Furthermore, Domina Hotel allows optimising management and keeping energy consumption under control allowing considerable saving. This implies greater customer satisfaction, a more efficient hotel and lower running costs. SCALABILITY AVE Domina Hotel systems suits all needs, both in terms of costs and performance. We have a simple and inexpensive system for small hotel operators, extremely suitable for an environment not requiring particularly sophisticated solutions. The bigger the hotel the more our system meets your ever-growing needs up to providing a complete network system for monitoring the rooms and any type of environment, even in big hotels. If you expect to expand with time, no need to worry we have the right solution for you. As a matter fact, the AVE Domina Hotel system requires just a few updates to match the growth of your business without forcing you to start from scratch, helping you preserve your investments over time. COMFORT AVE hotel devices are client-oriented, offering utmost comfort during his stay at your hotel. The thermostat, which is easy to use and intuitive, allows regulating the room temperature. The signalling system allows the client to decide when and whether to be disturbed. The room service personnel cannot ring the doorbell or open the door by mistake while the client is in the room. The remote control allows the client to operate the devices (loads) comfortably from his seat. 17

18 18

19 Elettricità Evoluta dal 1904 Hotel management stand-alone 19

20 Stand-alone system with 125kHz technology 53GA72-T External reader 441GA01-T 442GA01-T External readers are devices which, by means of a transponder card, allow controlling access to hotel rooms and premises. These readers are capable of independently managing their entries and exits in such a manner to be able to operate even without requiring other devices of the same hotel series. The devices may be configured for access to 4 different types of areas: ROOMS: access allowed for all enabled client cards and for the service personnel cards at given conditions (e.g. the room service personnel card operates only when the room is not occupied). SERVICE ROOMS: access allowed for service personnel cards but not for the client cards. COMMON AREAS: access allowed both for service personnel and client cards SCALABLE GND A B 12V ACCESS: access allowed BUS AVE GND ARMBUS for enabled service DISTURB personnel cards. For BATT access, client cards require sufficient credit BUS consisting in a number of accesses. The device updates the card reducing the credit at PROG each access. 53GA72-T Made in Italy BATTERY 3V CR2032 ONLY UNITA' CONTROLLO CAMERA / ROOM CONTROL UNIT FEM Clima Electrical features With DC power supply Supply voltage: +12Vdc ±25% Stand-by absorption (@ +12Vdc): 80mA Maximum absorption (@ +12Vdc): 150mA With AC power supply Supply voltage: 12Vac ±30% Allowed supply frequency: 50 60Hz Stand-by absorption (@ 12Vac): 200mArms Maximum absorption (@ 12Vac): 250mArms Mechanical features Container: 3 S44 modules (67.5 l x 45 h x 55.5 d) mm Max extension from components wire: 9 mm (from plate wire) Active area lighting: by means of low-absorption high-efficiency blue LEDs Degree of protection: IP 40 Terminal boards: poles 12A - 250V Programming connector: Female stereo jack d=2.5mm Blue LED light for identification in the dark Climatic conditions Reference relative temperature and humidity: 25 C RH 65% Operating temperature range: 0 C +40 C Maximum relative humidity: +35 C Maximum altitude: 2000m a.s.l. Transponder Technology Means: ISO7816 (credit card format) Transponder: RFID 125kHz Opt64 Compliance with standards R&TTE 1999/5/EC Directive Made of class 1. In compliance with ETSI EN Ver (2006-4) harmonised standards EMC Directive 2004/108/EC. In compliance with the following harmonised standards: - ETSI EN Ver ( ) - ETSI EN Ver ( ) - EN : A1: A2:2007 LVD 2006/95/EEC. In compliance with EN :2006 harmonised standards Auxiliary relay outputs Maximum applicable load (resistive A.C.): 250Vac (cosϕ 1) Maximum applicable load (CC): 30Vdc Maximum applicable load (inductive A.C.): 250Vac (cosϕ 0.4) Duration of contact (electric): manoeuvres maximum load) Maximum switching (electric) frequency: 1200 cycles/hr Duration of contact (mechanical): manoeuvres Maximum switching (mechanical) frequency: cycles/hr. OVERALL DIMENSIONS 441GA01-T DISTURB 8 45 mm 7 Made in Italy (3)A 230V~ Court. 2 Court V BUS 6 mm B A 20 67,5 mm 55,5 mm

21 Stand-alone system with 125kHz technology Elettricità Evoluta dal 1904 Cod. Description Modules 441GA01-T Transponder-equipped external reader - 125kHz 3 Domus 100 series 442GA01-T Transponder-equipped external reader - 125kHz 3 Life44 series 441GA01-T 442GA01-T DESCRIPTION OF TERMINAL BOARD Terminal Colour Description A Green A RS B Green B RS Black - Supply (Common inputs) + Black + Supply V 1 Green Room status Input Made in Italy 5(3)A 230V~ Court. Court. BUS 2 Green Courtesy Light Input 3 e 4 Green Courtesy Light Output 6 mm B A 5 Green Common for Terminals 6, 7 and 8 6 Green Electric Lock Output 7 Green Bell Output 8 Green Guest In Output 21

22 Stand-alone system with 125kHz technology 53GA72-T 441GA01-T Internal reader (room) 441GA30-T 442GA30-T Internal readers are devices to be positioned inside the premises to be managed to allow 1actuation of 5 room 6 7loads 8 9 and 10 services + GND A B 12V only in presence of an enabled card. Such BUS AVE GND ARMBUS DISTURB readers are capable of independently managing their inputs and outputs in such a BATT BUS manner to be able to operate even without requiring the other devices of the same hotel PROG series. Furthermore, they BATTERY are 3Vcapable of communicating 53GA72-Twith other devices such as room CR2032 ONLY UNITA' CONTROLLO CAMERA / ROOM CONTROL UNIT control Made in Italyunit, transponder card external reader (for access to premises), FEM Clima environment thermostat and 11transponder card 15 16program- mer. 17 The readers are provided with two auxiliary inputs for detecting the state of dry contacts (voltage free contacts) and with four output relays (still for dry contact). Electrical features With DC power supply Supply voltage: +12Vdc ±25% Stand-by absorption (@ +12Vdc): DISTURB _ 80mA Maximum absorption (@ +12Vdc): _ 150mA With AC power supply Supply voltage: 12Vac ±30% Allowed supply frequency: 50 60Hz Stand-by absorption (@ 12Vac): _ 200mArms Maximum absorption (@ 12Vac): _ 250mArms OVERALL DIMENSIONS Mechanical features Mechanical features Container: 3 S44 modules (67.5 l x 45 h x 55.5 d) mm Max extension from components wire: 9 mm (from plate wire) Active area lighting: by means of low-absorption high-efficiency blue LEDs Degree of protection: IP 40 Terminal boards: poles 12A -250V Programming connector: JFemale stereo jack d=2.5mm Blue LED light for identification in the dark Climatic conditions Reference relative temperature and humidity: 25 C RH 65% Operating temperature range: 0 C +40 C Maximum relative humidity: +35 C Maximum altitude: 2000m a.s.l. Transponder technology Means: ISO7816 (credit card format) Transponder: RFID 125kHz Opt64 Compliance with standards 1999/5/EC Directive Made of Class 1. In compliance with ETSI EN Ver (2006-4) harmonised standards EMC Directive 2004/108/EC. In compliance with the following harmonised standards: - ETSI EN Ver ( ) - ETSI EN Ver ( ) - EN : A1: A2:2007 LVD 2006/95/EEC. In compliance with EN :2006 harmonised standards Auxiliary relay output Maximum applicable load (resistive A.C.): 250Vac (cosϕ 1) Maximum applicable load (CC): 30Vdc Maximum applicable load (inductive A.C.): 250Vac (cosϕ 0.4) Duration of contact (electric): manoeuvres maximum load) Maximum switching (electric) frequency: 12V 1200 cycles/hr5(3)a 230V~ Court. Court. Duration of contact (mechanical): Made in Italy manoeuvres 6 mm Maximum switching (mechanical) B frequency cycles/hr. + - BUS A 441GA30-T DISTURB DISTURB A B 45 mm BUS 12V Made in Italy 6 mm Clima FEM DISTURB 5(3)A 230V~ ,5 mm 55,5 mm

23 Stand-alone system with 125kHz technology Elettricità Evoluta dal 1904 Cod. Description Modules 441GA30-T Transponder-equipped external reader with pocket 3-125kHz Domus 100 series 442GA30-T Transponder-equipped external reader with pocket 3-125kHz Life44 series 441GA30-T V 442GA30-T 5(3)A 230V~ Court. Court. BUS Made in Italy 6 mm B A DESCRIPTION OF TERMINAL BOARD A B BUS 12V - + Made in Italy 6 mm Clima FEM DISTURB 5(3)A 230V~ Terminal Colour Description A Green A RS-485 B Green B RS Black - Supply (Common inputs) + Black + Supply 1 Green Room Light Input 2 Green Window Contact Input 3 e 4 Green Room Light Output 5 Green Common for Terminals 6, 7 and 8 6 Green Air Conditioner Enabling Input 7 Green Load Control Output (EMF) 8 Green DISTURB Output 23 A B Made in Italy 6 mm

24 Stand-alone system with 125kHz technology Card programmer SCR-ALB04 Item SCR-ALB04 is a transponder card programmer (125KHz) capable of communicating with the hotel series devices. SCR-ALB04 is provided with a USB interface (compatible with 1.1 and 2.0 USB specifications), which allows directly interfacing the programmer to a monitoring PC for programming the transponder card and/or programming all 125kHz hotel management devices. In order for item SCR-ALB04 to operate, it is required to be connected to a PC provided with a special card programming software supplied as a kit. There are two types of software: the first basic one intended for the end user and a more technical one meant for installers and/or technical assistance centres. Light signals (LEDs) L1 (Red): NOT EXEC Indicates that the last command sent has not been executed correctly. L2 (Green): EXECUTED Indicates that the last command sent has been executed correctly L3 (Yellow): WAIT Indicates that the programmer is free and ready to receive new commands (blinking) Card 44339CHM-T 44339CHU-T The 125kHz cards used for hotel management are provided with a rewritable memory equivalent to 1kb CHM-T Card master The system is conceived to use a Master card in order to be able to perform any card preparation and/or programming operation. This Master card has its own unambiguous code called Hotel Code which is transferred to the reader through the same Master in the direct programming step alongside any other required data and a 24 or that it is completing the execution of a previous command (fixed light). L4 (Yellow): TX Indicates that a communication from the SCR-ALB04 programmer to the PC through interface is in progress. L5 (Yellow): RX Indicates that a communication from the PC to the SCR-ALB04 programmer through interface is in progress. Electrical features Supply voltage (DC): +5Vdc ±10% self supplied through USB port Stand-by absorption (@ +5Vdc): 50mA Maximum absorption (@ +5Vdc): 100mA USB interface compatibility: USB1.1/2.0 Climatic conditions Reference relative temperature and humidity: 25 C RH 65% Operating temperature range: 0 C +40 C Maximum relative humidity: +35 C Maximum altitude: 2000m a.s.l. Progressive Room Code automatically increased by the reader after the first configuration. Systems divided into several zones and/or several sub-systems may be built. In this case, the system must be provided with a Master card for each of the predetermined combinations (e.g. 3 zones and 2 subsystems = 6 Master cards). NOTE: The Master card (or Master cards) serves as an identification for the system and it should be preserved with care for possible future configurations. The system code received by the Master card (alongside the sub-system code and zone code), is memorised by the reader and, during the client and/or service per- Mechanical features Container: 123 l x 30 h x 68 d mm Material: ABS (UL 94 HB) Colour: Black (Ral 9005) Degree of protection: IP40 PC interface: USB 1.1/2.0 (Type B connector) ARMBus interface: Stereo Jack 2.5mm Compatible with all 125kHz hotel system elements Operating mode The SCR-ALB04 transponder card reader/programmer may be used both as a simple device for programming transponder cards used for 125kHz hotel management (alongside a user software) and in combination with a further software (meant for technicians and/or installers), as a programmer for all modules made for hotel management. As a matter of fact, it allows updating management firmware and/or modifying configuration parameters of the various devices of the 125kHz hotel series. Furthermore, it allows monitoring traffic both on the room Bus (Sniffer) bearing all the messages and/or commands circulating in the Bus itself. sonnel card programming step, it is transferred on all the programmed cards through the reader itself. In case of failure or lack of the SCR-ALB04 programmer, all the access card programming operations may be performed by using the Master card, following procedures outlined in the reader instructions CHU-T User card User cards allow access to or use of a service. These cards are of the following types: CLIENT, ROOM SERVICE PER- SONNEL, MAINTENANCE PERSONNEL, PASSEPARTOUT, SUPER-GUEST, SUB-MASTER, MASTER COPY, ERASER.

25 Stand-alone system with 125kHz technology Elettricità Evoluta dal 1904 Cod. Description Modules SCR-ALB04 Transponder card programmer 125kHz - SFW-ALB04 software included SFW-ALB04 Card generation software Generates a 125kHz or MIFARE card depending on - the programmer used SCR-ALB04 SFW-ALBTECSystem configuration software for technicians and installers - EXAMPLES OF SCREENSHOTS ROOM STATUS: AVE stand-alone system software allows a constant update on which rooms are reserved and for how long. Management of the rooms allows monitoring the situation and avoiding unpleasant inefficiency for the clients as well creating client cards with expiry dates.. PERSONNEL MANAGEMENT: Personnel management allows constant monitoring of the situation and generating premises access cards allowing the hotel personnel to perform its duties in an easy manner. The room service personnel may enter the rooms for cleaning and tidying, but only when the room is not occupied by the client hence avoiding unpleasant inconveniences. The maintenance personnel shall have access to all premises without restrictions except for the rooms occupied by the clients. Cod. Description Modules 44339chm-t 125kHz Master Transponder Card - Card format: ISO chm-t 44339chU-t 125kHz User Transponder Card - Card format: ISO chU-t 25

26 Stand-alone system with MIFARE technology 53GA72-T External reader (room) 441GA01-M 442GA01-M External readers are devices which, through the use of MIFARE cards, allow controlling access to the hotel rooms and premises, and they are capable of operating even without requiring other devices of the same hotel series. MIFARE technology allows generating cards having higher security level and integrating advanced services (e-money) therein with topmost level reading performance. The devices may be configured for access to 4 different types of areas: ROOMS: access allowed for all enabled client cards and for the service personnel cards at given conditions (e.g. the room service personnel card operates only when the room is not occupied). SERVICE ROOMS: access allowed for service personnel cards but not for the client + cards. GND A B 12V AVE BUS GND ARMBUS COMMON AREAS: access allowed both BATT for service personnel and DISTURB BUS client cards. SCALABLE ACCESS: access allowed PROGfor enabled service personnel cards. For access, CR2032 client cards require BATTERY ONLY 3V sufficient 53GA72-Tcredit consisting in a number UNITA' CONTROLLO CAMERA / ROOM CONTROL UNIT Made in Italy of accesses. The device updates the FEM Clima card reducing the credit at each access Electrical features With DC power supply Supply voltage: +12Vdc ±25% Stand-by absorption (@ +12Vdc): 80mA Maximum absorption (@ +12Vdc): 150mA With AC power supply Supply voltage: 12Vac ±30% Allowed supply frequency: 50 60Hz Stand-by absorption (@ 12Vac): 200mArms Maximum absorption (@ 12Vac): 250mArms Mechanical features Container: 3 S44 modules (67.5 l x 45 h x 55.5 d) mm Max extension from components wire: 9 mm (from plate wire) for the Domus 100 series and Life44, while the AveTouch 442GA02-M code is beneath the components wire Active area lighting: by means of low-absorption high-efficiency blue LEDs Degree of protection: IP 40 Terminal boards: poles 12A - 250V Programming connector: Female Stereo Jack d=2.5mm Blue light for identification in the dark MIFARE technology Means: ISO7816 (Credit card format) Transponder: 13.56MHz MIFARE RFID (ISO type A standard) Climatic conditions Reference relative temperature and humidity: 25 C RH 65% Operating temperature range: 0 C +40 C Maximum relative humidity: +35 C Maximum altitude: 2000m a.s.l. Auxiliary relay outputs Maximum applicable load (resistive A.C.): 250Vac (cosϕ1) Maximum applicable load (CC): 30Vdc Maximum applicable load (inductive A.C.): 250Vac (cosϕ0.4) Duration of contact (electric): manoeuvres maximum load) Maximum switching (electric) frequency: 1200 cycles/hr Duration of contact (mechanical): manoeuvres Maximum switching (mechanical) frequency cycles/hr. Compliance with standards R&TTE 1999/5/EC Directive Made of class 1. In compliance with ETSI EN Ver (2006-4) harmonised standards EMC Directive 2004/108/EC. In compliance with the following harmonised standards: - ETSI EN Ver ( ) - ETSI EN Ver ( ) - EN : A1: A2:2007 LVD 2006/95/EEC. In compliance with the EN :2006 harmonised standards OVERALL DIMENSIONS OVERALL DIMENSIONS 441GA01-T DISTURB mm Made in Italy (3)A 230V~ Court. 2 Court V BUS 6 mm B A 26 67,5 mm 55,5 mm

27 Stand-alone system with MIFARE technology Elettricità Evoluta dal 1904 Cod. Description Modules 441GA01-M External reader MIFARE 3 Domus 100 series 442GA01-M External reader MIFARE 3 Life44 series 441GA01-M 442GA02-M External reader AVETouch MIFARE 3 AVETouch series 442GA01-M 442GA02-M 442GA02-M application examples Available upon request DESCRIPTION OF TERMINAL BOARD Terminal Colour Description A Green A RS B Green B RS Black - Supply (Common inputs) V + Black + Supply 1 Green Room Status Input Made in Italy 5(3)A 230V~ Court. Court. BUS 2 Green Courtesy Light Input 3 e 4 Green Courtesy Light Output 6 mm B A 5 Green Common for Terminals 6, 7 and 8 6 Green Electric Light Output 7 Green Bell Enabling Output 8 Green Guest IN Output 27

28 Stand-alone system with MIFARE technology Internal reader (room) 53GA72-T 441GA01-T 441GA30-M + GND A B 12V AVE BUS ARMBUS 442GA30-M DISTURB Internal BATT readers are devices to be positioned inside BUS the premises to be managed to allow actuation of room loads and services only in presence of an enabled card. Such readers PROG are capable of operating even without requiring other CR2032 BATTERY devices ONLY 3V of the same hotel 53GA72-T series. MIFARE Made in Italy technology allows generating cards FEM Clima having higher security level and integrating advanced services 11 12(e-money) therein with topmost level reading performance. Furthermore, they are capable of communicating with other devices such as room control unit, external reader, environment thermostat and MIFARE card programmer. The readers are provided with two auxiliary inputs for detecting the state of dry contacts (voltage free contacts) and with four output relays (still dry contact). Electrical features DISTURB With DC power supply Supply voltage: +12Vdc ±25% Stand-by absorption (@ +12Vdc): 80mA Maximum absorption (@ +12Vdc): 150mA With AC power supply Supply voltage: 12Vac ±30% Allowed supply frequency: 50 60Hz Stand-by absorption (@ 12Vac): 200mArms Maximum absorption (@ 12Vac): 250mArms Mechanical features Container: 3 S44 modules GND UNITA' CONTROLLO CAMERA / ROOM CONTROL UNIT (67.5 l x 45 h x 55.5 d) mm Max extension from components wire: 9 mm (from plate wire) Active area lighting: by means of low-absorption high-efficiency blue LEDs Degree of protection: IP 40 Terminal boards: poles 12A - 250V Programming connector: Female Stereo Jack d=2.5mm Blue light for identification in the dark Climatic conditions Reference relative temperature and humidity: 25 C RH 65% Operating temperature range: 0 C +40 C Maximum relative humidity: +35 C Maximum altitude: 2000m a.s.l. MIFARE technology Means: ISO7816 (Credit Card format) Transponder: 13.56MHz MIFARE RFID (ISO type A standard) Compliance with standards R&TTE 1999/5/EC Directive Made of class 1. According to ETSI EN Ver (2006-4) harmonised standards EMC Directive 2004/108/EC. According to the following harmonised standards: - ETSI EN Ver ( ) - ETSI EN Ver ( ) - EN : A1: A2:2007 LVD 2006/95/EEC. According to EN :2006 harmonised standards: Auxiliary relay outputs Maximum applicable load (resistive A.C.): 250Vac (cosϕ 1) Maximum applicable load (CC): 30Vdc Maximum applicable load (inductive A.C.): 250Vac (cosϕ 0.4) Duration of contact (electric): manoeuvres maximum load) Maximum switching (electric) frequency: 1200 cycles/hr Duration of contact (mechanical): manoeuvres Maximum switching (mechanical) frequency cycles/hr. 8 7 Made in Italy 6 mm (3)A 230V~ Court. 2 Court BU B OVERALL DIMENSIONS 441GA30-T DISTURB DISTURB 45 mm A B BUS 12V Made in Italy 6 mm Clima FEM 5(3)A 230V~ ,5 mm 55,5 mm

29 Stand-alone system with MIFARE technology Elettricità Evoluta dal 1904 Cod. Description Modules 441GA30-M Internal reader with pocket - MIFARE 3 Domus 100 series 442GA30-M Internal reader with pocket - MIFARE 3 3 Life44 series 441GA30-M V 442GA30-M 5(3)A 230V~ Court. Court. BUS Made in Italy 6 mm B A DESCRIPTION OF TERMINAL BOARD A B BUS 12V - + Made in Italy 6 mm Clima FEM DISTURB 5(3)A 230V~ Terminal Colour Description A Green A RS-485 B Green B RS Black - Supply (Common inputs) + Black + Supply 1 Green Room Light Input 2 Green Window Contact Input 3 e 4 Green Room Light Output 5 Green Common for Terminals 6, 7 and 8 6 Green Air Conditioner Enabling Input 7 Green Load Control Output (EMF) 8 Green DISTURB Output 29 A B Made in Italy 6 mm

30 Stand-alone system with MIFARE technology Card programmer SCR-ALBM1 Item SCR-ALBM1 is a MIFARE card programmer capable of communicating with the hotel series devices. SCR-ALBM1 is provided with a USB interface (compatible with 1.1 and 2.0 USB specifications), which allows directly interfacing the programmer to a monitoring PC for programming cards and/or for monitoring and/or programming all MIFARE hotel management devices. In order for item SCR-ALBM1 to operate, it is required to be connected to a PC provided with a special card programming software supplied as a kit. There are two types of software: the first basic one intended for the end user and a more technical one meant for installers and/or technical assistance centres Light signals (LEDs) L1 (Red): NOT EXEC Indicates that the last command sent has not executed correctly. L2 (Green): EXECUTED Indicates that the last command sent has been executed correctly L3 (Yellow): WAIT Indicates that the programmer is free and ready to receive new commands (blinking) or that it is completing the execution of a Card 44339CHM-M 44339CHU-M MIFARE cards used for hotel management are provided with a rewritable memory equivalent to 1kb CHM-M Card master The system is conceived to use a Master card in order to be able to perform any card preparation and/or programming operation. This Master card has its own unambiguous code called Hotel Code which is transferred to the reader through the same Master in the direct programming step alongside any other required data and a 30 previous command (fixed light). L4 (Yellow): TX Indicates that a communication from the SCR-ALBM1 programmer to the PC through interface is in progress L5 (Yellow): RX Indicates that a communication from the PC to the SCR-ALBM1 programmer through interface is in progress. Electrical features Supply voltage (DC): +5Vdc ±10% self supplied through USB port Stand-by absorption (@ +5Vdc): 50mA Maximum absorption (@ +5Vdc): 100mA USB interface compatibility: USB1.1/2.0 Climatic conditions Temperatura ed umidità relativa di riferimento: 25 C UR 65% Range operativo di temperatura: 0 C +40 C Umidità Relativa massima: +35 C Altitudine massima: 2000m s.l.m. Mechanical features Container: 123 l x 30 h x 68 d mm Progressive Room Code automatically increased by the reader after the first configuration. Systems divided into several zones and/or several sub-systems may be built. In this case, the system must be provided with a Master card for each of the predetermined combinations (e.g. 3 zones and 2 subsystems = 6 Master cards). NOTE: The Master card (or Master cards) serves as an identification for the system and it should be preserved with care for possible future configurations. The system code received by the Master card (alongside the sub-system code and zone code), is memorised by the reader and, during the client and/or service per- Material: ABS (UL 94 HB) Colour: Black (Ral 9005) Degree of protection: IP40 PC interface: USB 1.1/2.0 (Type B connector) ARMBus interface: Stereo Jack 2.5mm Operating mode The SCR-ALBM1 transponder card programmer may be used as a simple device for programming cards used for MIFARE hotel management, both in stand-alone and in network mode or in combination with a further software (meant for technicians and/or installers), as a programmer for all modules made for hotel management. As a matter of fact, it allows updating management firmware and/or modifying configuration parameters (resident in EEPROM) of the various devices of the MIFARE hotel series. Furthermore, it allows monitoring traffic both on the room Bus (Sniffer) bearing all the messages and/or commands circulating in the Bus itself. sonnel card programming step, it is transferred on all the programmed cards through the reader itself. In case of failure or absence of SCR-ALBM1 programmer, all the access card programming operations may be performed by using the Master card, following procedures outlined in the reader instructions CHU-M User card User cards allow access to or use of a service. These cards are of the following types: CLIENT, ROOM SERVICE PER- SONNEL, MAINTENANCE PERSONNEL, PASSEPARTOUT, SUPER-GUEST, SUB- MASTER, MASTER COPY, ERASER

31 Stand-alone system with MIFARE technology Elettricità Evoluta dal 1904 Cod. Description Modules SCR-ALBM1 MIFARE card programmer - SFW-ALB04 software included SFW-ALB04 Card generation software Generates a 125kHz or MIFARE card depending - on the programmer used SCR-ALBM1 SFW-ALBTEC System configuration software for technicians and installers - Notes : - the encoder and MIFARE cards operate both in stand-alone systems and in network modes -for further details on SFW-ALB04 software see page 25 Cod. Description Moduli 44339chm-M MIFARE Master Card - Card format: ISO chU-M MIFARE User Card - Card format: ISO chm-M 44339chU-M 31

32 Thermostat Stand-alone system 125kHz and MIFARE technology common products 441GA52-T 442GA52-T The thermostat is used for detecting environment temperature and management of the thermoregulation of a hotel room or other premises in general. The thermostat is capable of independently managing its inputs and outputs. Furthermore, the thermostat is capable of communicating with the other devices such as the room control centre, external reader, internal reader and card both 125kHz and MIFARE programmer. This device is provided with two live analogic auxiliary inputs (+5Vdc) for detecting resistive values (room/window status and water temperature) and with four dry contact relay outputs. In addition, it is capable of managing both heaters and fan-coils. Electrical features With DC power supply Supply voltage: +12Vdc ±25% Stand-by absorption (@ +12Vdc): 50mA Maximum absorption (@ +12Vdc): 150mA With AC power supply Supply voltage: 12Vac ±30% Allowed supply frequency: 50 60Hz Stand-by absorption (@ 12Vac): 75mArms Maximum absorption (@ 12Vac): 200mArms Climatic conditions Reference relative temperature and humidity: 25 C RH 65% Operating temperature range: 0 C +40 C Maximum relative humidity: +35 C Maximum altitude: 2000m a.s.l. Mechanical features Container: 3 S44 modules (67.5 l x 45 h x 55.5 d) mm Max extension from components wire: 6.5 mm (from plate wire) Degree of protection: IP40 Terminal boards: poles 12A - 250V Programming connector: Female stereo jack d=2.5mm Compatible with all System 44 elements. Temperature detection Measurement range: from 0 C to 40 C Regulation range: 30 C (from 5 C to 35 C) Reproducibility error: 0.2 C (max) Consistency: 0.3 C (max) Thermostat differential: from 0.2 C to 2,5 C to 2.5 C adjustable Display in C or F Compliance with standards IEC/EN : automatic electrical controls for household and similar use (Part 1 - general requirements) IEC EN : automatic electrical controls for household and similar use (Part Particular requirements for control devices sensitive to temperature) Auxiliary relay output Maximum applicable load (resistive): 250Vac (cosϕ 1) Maximum applicable load (inductive): 250Vac (cosϕ 0.4) Duration of contact (electric): manoeuvres maximum load) Maximum switching (electrical) frequency: 1200 cycles/hr Duration of contact (mechanical): manoeuvres Maximum switching (mechanical) frequency: cycles/ hr. DESCRIPTION OF DISPLAY ARMBUS ADDRESS: used only during programming step NIGHT SAVING: thermostat in night saving mode 32 OVERTEMPERATURE: overtemperature control enabled ANTIFREEZE: antifreeze control enabled BUS: system connected to Bus KEY LOCK ENABLED SUMMER: thermostat in summer mode. If blinking it means the window is open INTERMEDIATE : mild season mode. If blinking it means the window is open WINTER: winter mode. If blinking it means the window is open SAVING MODE: foperating time controlled by external clock FAN COIL: air conditioner enabled (fan symbol). The vertical bar indicates the fan-coil speed. OFF REGULATION: thermoregulation disabled manually. Antifreeze and overtemperature functions remain enabled ANTIFREEZE: antifreeze function enabled (valve open and fan speed 1) TEMPERATURE MEASUREMENT UNIT: C = degrees Celsius F = degrees Fahrenheit E = temperature out of range

33 V BUS 5(3)A 230V~ Court. Court. Stand-alone Made in Italy 6 mm system 125kHz and MIFARE technology common products B A Elettricità Evoluta dal 1904 A B BUS 441GA52-T 12V Made in Italy 6 mm 5(3)A 230V~ Clima FEM Cod. Description Modules 441GA52-T Saving thermostat with fan-coil or heaters regulation for stand-alone hotel management system 3 - Domus 100 series 442GA52-T Saving thermostat with fan-coil or heaters regulation for stand-alone hotel management system 3 - Life44 series DISTURB Note: 8 by connecting the 53GA91-T temperature probe to the thermostat, you obtain the automatic summer/winter switching GA52-T DESCRIPTION OF TERMINAL BOARD Terminal Colour Description A Green A RS-485 A B Made in Italy 6 mm B Green B RS Black - Supply (Common inputs) BUS 12V 2(2)A 230V~ Black + Supply 1 Green Window Contact/Room status Input 2 Green Water Probe Input 3 e 4 Green Valve Output Green Common for Terminals 6, 7 and 8 6 Green Fan Coil Speed 1 Output 7 Green Fan Coil Speed 2 Output 8 Green Fan Coil Speed 3 Output DESCRIPTION OF THE BUTTON PANEL Enables/disables environment thermoregulation Decreasing the temperature set-point by 0.1 C steps Increasing the temperature set-point by 0.1 C steps Regulates the fan-coil speed 33

34 Room Control Unit Stand-alone system 125kHz and MIFARE technology common products 53GA72-T Article 53GA72-T is a room control unit to complete the transponder stand-alone hotel range of products. 53GA72-T is capable of independently managing its outputs and inputs as well communicating with various slave devices of the same hotel series (external reader, internal reader and environment thermostat) or with a possible master device (monitoring PC connected to the Bus through the SCR-ALB04 or SCR- ALBM1 programmer. The 53GA72-T room control unit is provided with four auxiliary imputs for detecting the state of dry contacts and of four relay outputs. It is provided with an internal clock (RTC or REAL TIME CLOCK) with lithium buffer battery which allows complete management of a clock/calendar required in case one wants to use the expiry function of the cards and/or the night saving function of the thermostat. The control unit has two LEDs at the front. The LEDs indicate the following: LED green (BATT): supply status of the device. If ON with fixed light it indicates that all is OK. Electrical features With DC power supply Supply voltage: +12Vdc ±25% Stand-by absorption (@ +12Vdc): 75mA Maximum absorption (@ +12Vdc): 200mA With AC power supply Supply voltage: 12Vac ±30% Allowed supply frequency: 50 60Hz Stand-by absorption (@ 12Vac): 150mArms Maximum absorption (@ 12Vac): 300mArms Climatic conditions Reference relative temperature and humidity: 25 C RH 65% Operating temperature range: 0 C +40 C Maximum relative humidity: +35 C Maximum altitude: 2000m a.s.l Mechanical features Container: 4 S44 modules (69.5 l x 89.5 h x 65 d) mm Degree of protection: IP40 Terminal boards: 10 poles + 8 poles 12A - 250V Programming connector: Female stereo jack d=2.5mm Compliance with standards EMC Directive 2004/108/EC. In compliance with the following harmonised standards - EN : A1: A2:2007 LVD 2006/95/EEC. In compliance with the EN :2006 harmonised standards OVERALL DIMENSIONS GND A B 12V ARMBUS AVE BUS DISTURB GND BATT BUS PROG 89,5 mm 53GA72-T 53GA72-T Made in Italy BATTERY 3V CR2032 ONLY UNITA' CONTROLLO CAMERA / ROOM CONTROL UNIT FEM Clima ,5 mm 65 mm

35 Stand-alone system 125kHz and MIFARE technology common products Elettricità Evoluta dal 1904 Cod. Description Modules 53GA72-T Room control unit for stand-alone systems 4 DIN GA-RTC Portable device for setting date and time - 53GA72-T TERMINAL BOARD Terminal Colour Description GND A B 12V ARMBUS BATT BUS AVE BUS DISTURB GND 1 Green - Supply 2 Green A RS Green B RS Green + Supply 5 Green AveBus + 6 Green Electric Lock Input 53GA72-T PROG 53GA72-T Made in Italy BATTERY 3V CR2032 ONLY UNITA' CONTROLLO CAMERA / ROOM CONTROL UNIT FEM Clima Green Room Light 2 Input 8 Green DISTURB Input 9 Green Air Conditioner 2 Enabling Input 10 Green Common Inputs and AVEBus (GND) 11 e 12 Green Electric Lock command Output 13 Green Room Light 2 command Output 14 Green Loads (EMF) 2 Switch Output 15 Green Air Conditioner 2 Enabling Switch Output NC contact 16 Green Air Conditioner 2 Enabling Switch Output NO contact 17 Green Common for Terminals 13, 14, 15 and GA01-T DISTURB 8 7 Made in Italy (3)A 230V~ Court. 2 Court V BUS 6 mm

36 36

37 Elettricità Evoluta dal 1904 Network hotel management 37

38 Network system with MIFARE technology 53GA72-T External reader 441AR01-M 442AR01-M The external readers in network are devices which, by means of MIFARE card, allow controlling access to rooms and hotel premises. External readers are capable of communicating with the room control unit, and they are driven by the latter through a monitoring central station. Such readers are provided with two auxiliary inputs for detecting the status of the dry contacts (voltage free) and four relay inputs (still dry contact). External readers are provided with a non-volatile memory for personalising some operating parameters (e.g. duration of the electric locking command) GND A B 12V AVE BUS ARMBUS DISTURB Electrical features With DC BATTpower supply Supply BUS voltage: +12Vdc ±25% Stand-by absorption (@ +12Vdc): 80mA Maximum absorption (@ +12Vdc): 150mA PROG With AC power supply CR2032 Supply voltage: BATTERY ONLY 12Vac 3V ±30% 53GA72-T Allowed supply frequency: 50 60Hz UNITA' CONTROLLO CAMERA / ROOM CONTROL UNIT Made in Italy Stand-by absorption (@ 12Vac): 200mArms FEM Clima Maximum absorption (@ 12Vac): 250mArms GND Mechanical features Container: 3 S44 modules (67.5 l x 45 h x 55.5 d) mm Max extension from components wire: 9 mm (from plate wire) for the Domus 100 and Life44 series, while the AveTouch 442GA02-M code is beneath the components wire. Active area lighting: by means of high-efficiency blue LEDs Degree of protection: IP 40 Terminal boards: poles 12A - 250V Programming connector: Female Stereo Jack d=2.5mm Compatible with all System 44 elements Climatic conditions Reference relative temperature and humidity: 25 C RH 65% Operating temperature range: 0 C +40 C Maximum relative humidity: +35 C Maximum altitude: 2000m a.s.l. MIFARE technology Means: ISO7816 (Credit card format) Transponder: 13.56MHz MIFARE RFID (ISO type A standard) Compliance with standards R&TTE 1999/5/EC Directive Made of class 1. In compliance with ETSI EN Ver (2006-4) harmonised standards EMC Directive 2004/108/EC. In compliance with the following harmonised standards: - ETSI EN Ver ( ) - ETSI EN Ver ( ) - EN : A1: A2:2007 LVD 2006/95/EEC. In compliance with the EN :2006 harmonised standards. Auxiliary relay outputs Maximum applicable load (resistive A.C.): 250Vac (cosϕ 1) Maximum applicable load (CC): 30Vdc Maximum applicable load (inductive A.C.): 250Vac (cosϕ 0.4) Duration of contact (electric): manoeuvres maximum load) Maximum switching (electric) frequency: 1200 cycles/hr Duration of contact (mechanical): manoeuvres Maximum switching (mechanical) frequency cycles/hr. OVERALL DIMENSIONS 441GA01-T DISTURB mm Made in Italy (3)A 230V~ Court. 2 Court V BUS 6 mm B A 38 67,5 mm 55,5 mm

39 Network system with MIFARE technology Elettricità Evoluta dal 1904 Cod. Description Modules 441GA01-M External reader MIFARE 3 Domus 100 series 442GA01-M External reader MIFARE 3 Life44 series 441GA01-M 442GA02-M External reader AVETouch MIFARE 3 AVETouch series 442GA01-M 442GA02-M 442GA02-M Application examples Available upon request DESCRIPTION OF TERMINAL BOARD Terminal Colour Description A Green Pole A Line RS B Green Pole B Line RS Black Negative Supply (Common Inputs) V + Black Positive Supply 1 Green Input (e.g. Room status detection) 5(3)A 230V~ BUS 2 Green Input (e.g. Courtesy Light) Made in Italy 3 e 4 Green Output (e.g. Courtesy Light) 6 mm B A 5 Green Common for Terminals 6, 7 and 8 6 Green Output (e.g. Electric lock) 7 Green Output (e.g. Bell) 8 Green Output (e.g. Guest In ) 39

40 Network system with MIFARE technology Internal reader (room) 53GA72-T 441GA01-T 441AR30-M + GND A B 12V AVE BUS ARMBUS 442AR30-M DISTURB Internal BATT readers in network are devices to be positioned BUS inside the premises to be managed to allow actuation of room loads and services only in presence of an PROG enabled card. External readers are capable of communicating BATTERY 3V with the room 53GA72-T control unit, and they are driven by CR2032 ONLY the latter through a monitoring central Made in Italy station. FEM Clima Such readers 11are 12 provided with 16 two 17 auxiliary inputs for detecting the status of dry contacts (voltage free) and four relay outputs (still dry contact). Electrical features With DC power supply Supply voltage: +12Vdc ±25% Stand-by absorption (@ +12Vdc): 80mA Maximum absorption (@ +12Vdc): 150mA With AC power supply DISTURB Supply voltage: 12Vac ±30% Allowed supply frequency: 50 60Hz Stand-by absorption (@ 12Vac): 200mArms Maximum absorption (@ 12Vac): 250mArms GND UNITA' CONTROLLO CAMERA / ROOM CONTROL UNIT Mechanical features Container: 3 S44 modules (67.5 l x 45 h x 55.5 d) mm Max extension from components wire: 9 mm (from plate wire) Active area lighting: by means of high-efficiency blue LEDs Degree of protection: IP 40 Terminal boards: poles 12A - 250V Programming connector: Female Jack Stereo d=2.5mm Compatible with all System 44 elements Climatic conditions Reference relative temperature and humidity: 25 C RH 65% Operating temperature range: 0 C +40 C Maximum relative humidity: +35 C Maximum altitude: 2000m a.s.l. MIFARE technology Means: ISO7816 (Credit card format) Transponder: 13.56MHz MIFARE RFID (ISO type A standard) Compliance with standards R&TTE 1999/5/EC Directive Made of class 1. In compliance with ETSI EN Ver (2006-4) harmonised standards EMC Directive 2004/108/EC. In compliance with the following harmonised standards: - ETSI EN Ver ( ) - ETSI EN Ver ( ) - EN : A1: A2:2007 LVD 2006/95/EEC. In compliance with EN :2006 harmonised standards Auxiliary relay outputs Maximum applicable load (resistive A.C.): 250Vac (cosϕ 1) Maximum applicable load (CC): 30Vdc Maximum applicable load (inductive A.C.): 250Vac (cosϕ 0.4) Duration of contact (electric): manoeuvres maximum load) Maximum switching (electric) frequency: 1200 cycles/hr Duration of contact (mechanical): manoeuvres Maximum switching (mechanical) frequency 5(3)A 230V~ cycles/hr. Made in Italy 6 mm Court. 3 2 Court BU B OVERALL DIMENSIONS 441GA30-T DISTURB DISTURB 45 mm A B BUS 12V Made in Italy 6 mm Clima FEM 5(3)A 230V~ ,5 mm 55,5 mm

41 Network system with MIFARE technology Elettricità Evoluta dal 1904 Cod. Description Modules 441GA30-M Internal reader with pocket - MIFARE 3 Domus 100 series 442GA30-M Internal reader with pocket MIFARE 3 Life44 series 44GA30-M V 442GA30-M Made in Italy 5(3)A 230V~ BUS 6 mm B A CONTACT BOARD DESCRIPTION Terminal Colour Description A Green Pole A Line RS-485 A B Made in Italy 6 mm B Green Pole B Line RS Black Negative Supply (Common Inputs) BUS 5(3)A 230V~ + Black Positive Supply 1 Green Input (e.g. Room status detection) 12V Green Input (e.g. Courtesy Light) 3 e 4 Green Output (e.g. Courtesy Light) Green Common for Terminals 6, 7 and 8 6 Green Output (e.g. Electric lock) 7 Green Output (e.g. Bell) 8 Green Output (e.g. Guest In ) 41 A B Made in Italy 6 mm

42 Network system with MIFARE technology 42 Termostat 441AR52-M 442AR52-M The thermostat is used for detecting environment temperature and management of the thermoregulation of a hotel room or other premises in general. The thermostat is capable of communicating with the room control unit, and it is driven by the latter through the monitoring central station, hence allowing remote control of the temperature. This device is provided with two live analogue auxiliary inputs (+5Vdc) for detecting resistive values (room/window status and water temperature) and with four dry contact relay outputs. Electrical features With DC power supply Supply voltage: +12Vdc ±25% Stand-by absorption (@ +12Vdc): 50mA Maximum absorption (@ +12Vdc): 150mA With AC power supply Supply voltage: 12Vac ±30% Allowed supply frequency: 50 60Hz Stand-by absorption (@ 12Vac): 75mArms DESCRIPTION OF DISPLAY OVERTEMPERATURE: overtemperature control enabled ANTIFREEZE: antifreeze control enabled BUS: system connected to Bus KEY LOCK ENABLED Maximum absorption (@ 12Vac): 200mArms Climatic conditions Reference relative temperature and humidity: 25 C RH 65% Operating temperature range: 0 C +40 C Maximum relative humidity: +35 C Maximum altitude: 2000m a.s.l. Mechanical features Container: 3 S44 modules (67.5 l x 45 h x 55.5 d) mm Max extension from components wire: 6.5 mm (from plate wire) Degree of protection: IP40 Terminal boards: poles 12A - 250V Programming connector: Female stereo jack d=2.5mm Compatible with all System 44 elements Temperature detection Measurement range: from 0 C to 40 C Regulation range: 30 C (from 5 C to 35 C) Reproducibility error: 0.2 C (max) Consistency: 0.3 C (max) Thermostat differential: from 0.2 C to 0.2 C to 2.5 C adjustable Display in C or F Compliance with standards ARMBUS ADDRESS: used only during programming step SUMMER: thermostat in summer mode. If blinking it means the window is open INTERMEDIATE : mild season mode. If blinking it means the window is open WINTER: winter mode. If blinking it means the window is open SAVING MODE: operating time controllerd by external clock IEC/EN : automatic electrical controls for household and similar use (Part 1 - general requirements) IEC EN : automatic electrical controls for household and similar use (Part 2-9 Particular requirements for control devices sensitive to temperature) Auxiliary relay output Maximum applicable load (resistive): 250Vac (cosϕ 1) Maximum applicable load (inductive): 250Vac (cosϕ 0.4) Duration of contact (electric): manoeuvres maximum load) Maximum switching (electrical) frequency: 1200 cycles/hr Duration of contact (mechanical): manoeuvres Maximum switching (mechanical) frequency: cycles/hr. NIGHT SAVING: thermostat in night saving mode FAN COIL: air conditioner enabled (fan symbol). The vertical bar indicates the fancoil speed. OFF REGULATION: thermoregulation disabled manually. Antifreeze and overtemperature functions remain enabled ANTIFREEZE: antifreeze function enabled (valve open and fan speed 1) TEMPERATURE MEASURE- MENT UNIT: C = degrees Celsius F = degrees Fahrenheit E = temperature out of range