Cylindrical Photoelectric Sensor CY-100 SERIES

Transcription

1 307 Cylindrical Photoelectric Sensor SERIES Related Information General terms and conditions... F-7 Glossary of terms... P.55~ Sensor selection guide... P.27~ General precautions... P.58~ PHOTO PHOTO MEASURE ITY -LS200 Standard ORDER GUIDE 2 m cable length type Side view panasonic.net/id/pidsx/global Type Appearance Sensing range Retroreflective Diffuse reflective Retroreflective Diffuse reflective (Note 2,3) polarizing filters sensitivity adjuster separated Thrubeam Thrubeam (Note 2,3) polarizing filters sensitivity adjuster 2 m 6.56 ft 00 mm 0.33 ft 600 mm.97 ft 2 m 6.56 ft 00 mm 3.9 in Wide product range Shape: Standard type Side view type Connector: 2 m cable length type M2 plug-in connector type Diffuse reflective type sensor with sensitivity adjuster is available. M8 thread size for convenient mounting Strong resistance IP67 Convenient universal sensor mounting stand is available. 5 m 9.2 ft m 3.2 ft 5 m 9.2 ft m 3.2 ft Notes: ) The model No. with E shown on the label affixed to the thru-beam type sensor is the emitter, D shown on the label is the receiver. (e.g.) 2) The reflector is sold separately. 3) The sensing range of the retroreflective type sensor is specified for the RF-20 reflector (optional). M2 plug-in connector type 600 mm in M2 plug-in connector type is also available. When ordering this type, -Z for the M2 plug-in connector type to the model No. (e.g.) M2 plug-in connector type of CY-A-P is CY-A-P-Z. In case of the retroreflective type, M2 plug-in connector type of CY-9 -P-Y is CY-9 -P-Z-Y. Conforming to EMC Directive FEATURES Listing (2 m cable length type only) Model No. (Note ) Output NPN output PNP output operation CY-A CY-A-P Light-ON CY-B CY-B-P Dark-ON CY-92A-Y CY-92A-P-Y Light-ON CY-92B-Y CY-92B-P-Y Dark-ON CY-9A-Y CY-9A-P-Y Light-ON CY-9B-Y CY-9B-P-Y Dark-ON CY-2A CY-2A-P Light-ON CY-2B CY-2B-P Dark-ON CY-22A CY-22A-P Light-ON CY-22B CY-22B-P Dark-ON CY-VA CY-VA-P Light-ON CY-VB CY-VB-P Dark-ON CY-92VA-Y CY-92VA-P-Y Light-ON CY-92VB-Y CY-92VB-P-Y Dark-ON CY-9VA-Y CY-9VA-P-Y Light-ON CY-9VB-Y CY-9VB-P-Y Dark-ON CY-2VA CY-2VA-P Light-ON CY-2VB CY-2VB-P Dark-ON CY-22VA CY-22VA-P Light-ON CY-22VB CY-22VB-P Dark-ON Standard type Side view type

2 Cylindrical Photoelectric Sensor SERIES 308 ORDER GUIDE Mating cable (2 cables are required for the thru-beam type.) For M2 plug-in connector type Designation Model No. Description Sensor mounting MS-CY- Material: Stainless steel bracket MS-CY-2 Material: Plastic, For beam axis alignment Universal sensor mounting stand Type Model No. Description CN-2C-C2 Length: 2 m 6.56 ft Straight Clamping ring : CN-2C-C5 Length: 5 m 6.0 ft ømm 0.55 in CN-2CL-C2 Length: 2 m 6.56 ft Cable outer : Elbow CN-2CL-C5 Length: 5 m 6.0 ft ø5.3mm 0.2 in Reflective tape MS-AJ3 RF-20 RF-0 RF-0RL5 It can adjust the height of the sensor and reflector RF-20. (The thru-beam type sensor needs two brackets.) mm in 2 2 mm in 22 mm 5 m in, Thickness: 0. mm 0.02 in Mating cable Straight type Elbow type Sensor mounting bracket MS-CY- MS-CY-2 ITY Universal sensor mounting stand MS-AJ3 RF-20 RF-0 Reflective tape RF-0RL5 WIRING DIAGRAMS Wiring diagram Emitter of thru-beam type Receiver of thru-beam / Reflective type NPN output type separated Receiver of thru-beam / Reflective type PNP output type Connector pin position M2 connector 3 2 : +V 2 : Input (Only emitter of thru-beam type) 3 : 0 V : Output (Only receiver of thru-beam type and reflective type) -LS200

3 309 Cylindrical Photoelectric Sensor SERIES SPECIFICATIONS separated ITY -LS200 Model No. Type Thru-beam Retroreflective Diffuse reflective polarizing filters sensitivity adjuster Standard Side view Standard Side view Standard Side view Standard Side view Standard Side view Light-ON CY-A CY-VA CY-92A CY-92VA CY-9A CY-9VA CY-2A CY-2VA CY-22A CY-22VA Item Dark-ON CY-B CY-VB CY-92B CY-92VB CY-9B CY-9VB CY-2B CY-2VB CY-22B CY-22VB Sensing range 5 m 9.2 ft m 3.2 ft (Note 2) 2 m 6.56 ft (Note 2) Sensing object ø8 mm ø0.7 in or more opaque object (Setting distance between emitter and receiver: 5 m 9.2ft) ø50 mm ø.97 in or more opaque, translucent or transparent object (Note 2, ) ø50 mm ø.97 in or more opaque, translucent, transparent or specular object (Note 2, ) 00 mm 3.9 in (Note 3) 600 mm in (Note 3) Opaque, translucent or transparent object (Note ) Hysteresis 3 to 5 % of operation distance (Note 3) Supply voltage Current consumption Output Utilization category Short-circuit protection Response time Emitter: 35 ma or less Receiver: 35 ma or less <NPN output type> NPN open-collector transistor Maximum sink current: 00 ma Applied voltage: 2 V DC or less (between output and 0 V) Residual voltage:.5 V or less 2 to 2 V DC ±0 % Ripple P-P 0 % or less DC-2 or DC-3 Incorporated ms or less 35 ma or less Test input (emission halt) function Incorporated Operation indicator Power indicator Environmental resistance Pollution degree Protection Green LED (lights up when the power is ON) (incorporated on the emitter) <PNP output type> PNP open-collector transistor Maximum source current: 00 ma Applied voltage: 2 V DC or less (between output and +V) Residual voltage:.5 V or less Yellow LED (lights up when the output is ON) (incorporated on the receiver for thru-beam type) 3 (Industrial environment) IP67 (IEC) Ambient temperature 25 to +55 C 3 to +3 F (No dew condensation or icing allowed), Storage: 0 to +70 C 22 to +58 F Ambient humidity Ambient illuminance 50 % RH (at +70 C +58 F) Incandescent light: 5,000 lx at the light-receiving face EMC EN Voltage withstandability Vibration resistance Shock resistance 500 V AC for one min. between all supply terminals connected together and enclosure 0 to 55 Hz frequency, 0.5 mm 0.02 in amplitude in X, Y and Z directions for.5 hours each 29 m/s 2 acceleration (30 G ) in X, Y and Z directions for three times each Emitting element Infrared LED (modulated) Red LED (modulated) Infrared LED (modulated) Material Peak emission wavelength 890 nm 0.0 mil 875 nm 0.03 mil 665 nm 0.03 mil 875 nm 0.03 mil Cable (except for M2 plug-in connection type) Cable extension Net weight (Note 5) 2 m cable length type M2 plug-in connector type Enclosure: PBT, Lens: PMMA 0. mm 2 3-core cabtyre cable, 2 m 6.56 ft long Extension up to total 0 m 32.8 ft is possible with 0.3 mm 2, or more, cable (thru-beam type: both emitter and receiver). Receiver: 65 g Receiver: 5 g Receiver: 70 g Receiver: 20 g 65 g 5 g 70 g 20 g 65 g 5 g 70 g 20 g Accessories Nut: pcs. Nut: 2 pcs. 65 g 5 g 70 g 20 g 75 g 25 g Notes: ) Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 C +73. F. 2) The sensing range and the sensing object of the retroreflective type sensor are specified for the RF-20 reflector (optional). 3) The sensing range and the hysteresis of the diffuse reflective type sensor are specified for white non-glossy paper ( mm in) as the object. ) Make sure to confirm detection with an actual sensor before use for detection of the transparent object and the translucent object. 5) The weight includes the weight of nuts.

4 Cylindrical Photoelectric Sensor SERIES 30 DETECTION CURVES in Thru-beam type Mounting The tightening torque should be 3 N m or less. Use a cable with connector CN-2C(L)-C (optional) for M2 connector type. Tightening torque for connector part is 2 N m or less. cm ø 0.9 in ø 2 mm ft A 5 m m Diffuse reflective 0.55, , in 0 cm in 0,59 5 cm Mounting drawing with sensor or reflector RF-20 A Diffuse reflective type with adjustable sensitivity in A 60 cm Retroreflective type A=Sensing range Object 0 0 cm; White 90%; 2 Grey 8% reflector RF-20 reflector RF-20 PRECAUTIONS FOR PROPER Never use this product as a sensing device for personnel protection. In case of using sensing devices for personnel protection, use products which meet laws and standards, such as OSHA, ANSI or IEC etc., for personnel protection applicable in each region or country. Wiring Others in cm ft A m m Retroreflective type with polarizing filters ø of beam E/R , A 6.56 ft 2 m Refer to p.58~ for general precautions. Make sure that the power supply is off while wiring. Verify that the supply voltage variation is within the rating. If power is supplied from a commercial switching regulator, ensure that the frame ground (F.G.) terminal of the power supply is connected to an actual ground. Ensure that an isolation transformer is utilized for the DC power supply. If an autotransformer is utilized, the main body or power supply may be damaged. If the used power supply generates a surge, connect a surge absorber to the power supply to absorb the surge. Do not use during the initial transient time (0.5 sec) after the power supply is switched on. In case noise generating equipment (switching regulator, inverter motor, etc.) is used in the vicinity of this product, connect the frame ground (F.G.) terminal of the equipment to an actual ground. Do not run the wires together with high-voltage lines or power lines or put them in the same raceway. This can cause malfunction due to induction. Damage or burnout may result in case of short circuit of load or miswiring. Make a cable length as short as possible to lessen noise pickup. Our products have been developed / produced for industrial use only. Take care that the sensor is not directly exposed to fluorescent lamp from a rapid-starter lamp or a high frequency lighting device, as it may affect the sensing performance. Avoid using a product where there is excessive vapor, dust or corrosive gas, or in a place where it could be exposed directly to water or chemicals. Take care that the sensor does not come in direct contact with water, oil, grease or organic solvents, such as, thinner, etc. Do not use in an environment containing infammable or explosive gases. Never disassemble or modify the product. m separated ITY -LS200

5 3 Cylindrical Photoelectric Sensor SERIES DIMENSIONS (Unit: mm in) separated ITY CY- a b L = 2 or 5 m 6.56 or 6.0 ft MS-CY- M8 CN-2C-C2 CN-2C-C5 Sensing mounting bracket ø ø = = = = Connector pin position BU WH Mating cable BK BN 2 m cable length type (mm in) M2 plug-in connector type (mm in) a b a b Standard type CY- /2 / Standard type CY Side view type CY-V /2V /9V /92V Standard type CY Side view type CY-22V CN-2CL-C2 CN-2CL-C5 MS-CY-2 ø ø0.55 M2 L = 2 or 5 m 6.56 or 6.0 ft Sensing mounting bracket 0 5 ø ø ø0 ø L = = BU WH Mating cable Connector pin position 3 BK 2 BN Sensor -LS200 MS-AJ3. Ball-joint mounted fixing bracket series or RF-20 0 ø8.5 ø M M2 rod Universal sensor mounting stand 3. Support for M2 rod M ø6.5 ø

6 Cylindrical Photoelectric Sensor SERIES 32 DIMENSIONS (Unit: mm in) RF-20 RF ø5.5 ø R5 R ø.5 ø ø7.5 ø ø.5 ø = = ø.5 ø0.8 ITY separated -LS200