MIG/TIG/STICK Amp DC Welding Machine Lightweight & Portable

Transcription

1 DC //STICK INVERTER WELDERS 175MTS - //STICK 200C MTS - //STICK 200MTS - //STICK 250MTS - //STICK 250C - //STICK 250SW - //STICK 350MTS - //STICK 350SW - //STICK 500SW - //STICK MULTI 250K PULSE MULTI UNCTION WELDER MULTI 400KW PULSE MULTI UNCTION WELDER New Zealand Limited

2 //STICK 175 Amp XA-175MTS //STICK Amp DC Welding Machine Lightweight & Portable Latest IGBT inverter technology Stick Electrode () function Welding with Lift Arc unction Semi industrial application Digital Amp - Volt Meters Internal wire feeder for up to 200mm Ø spool VRD (Voltage Reduction Device) greatly reduces the risk of electric shock to the welding operator from potentially hazardous secondary welding circuit voltage. IP21S rating for environmental/safety protection Tolerant to variable power supply Seamless voltage and wire feed control Excellent mig welding with CO2 gas Excellent arc stability with all electrodes Spool Gun Connection Power Supply / Phases (V-Ph) 240v - 1 +/- 15% Duty 40 c as per AS/NZ Amps 140 Amps Duty 25 c (approximate) 175 Amps 140 Amps No Load Voltage (V) 53.0 Output Current Range 30A/15.5V - 175/22.0V Output Current Range 10A/20.4V - 140A/25.6V Rated Power 4.9 KVA Rated Power 5.0 KVA I Max 20.3 Amps 20.7 Amps I ieff 12.0 Amps 12.2 Amps Power factor 0.72 P 21S Wire Diameter Range (mm) 0.6, 0.8, 0.9 Dimensions Power Source (LxWxH) 480x230x360mm 17 Kg SPG A SpoolGun Option SPG200II 200A SpoolGun Option XA-TR Mig Trolley Option The XA-Mig175 is an inverter-based portable Mig welding machine with added Stick and Tig function. The Mig function allows you to weld with both Gas Shielded and Gasless wire. Easy step-less adjustment of voltage and wire feed make for easy setting of welding parameters giving excellent, professional welding results. Wire inch gives easy feeding of the wire during set up without gas wastage. Added welding capability delivers easy electrode welding with high quality results, including cast Iron, stainless and low hydrogen. Connection of the tig torch provides quality Lift Arc DC welding of steel, stainless steel and copper. An additional feature is the Spoolgun ready function that allows the simple connection of the SPG200 Spoolgun for the use of thin or softer wires that don t have the column strength to feed through standard mig torches, such as aluminium wire. A semi-industrial machine, it is lightweight and portable, an optional trolley provides off the floor operation and better manoeuvrability around the workshop. Being 240v single phase gives great portability, it can be run from any 15 Amp power socket providing more flexible use for site and home workshop locations. Ideal for general engineers, maintenance workshop, rural workshop, panel beaters, home workshop. Designed and built to our specifi cation. Certifi ed to - AS/NZ Product Code: XA-175MTS-K Standard Package includes: XA-175MTS Welding Machine, Mig Torch x 3m, Earth Lead & Arc Lead 25mm x 4m, Regulator 2

3 //STICK 190 Amp XA-200C MTS //STICK - 200Amp DC Welding Machine Lightweight & Portable Latest IGBT inverter technology Stick Electrode () function Welding with Lift Arc unction Semi industrial application Digital Amp - Volt Meters Internal wire feeder for up to 200mm Ø spool VRD (Voltage Reduction Device) greatly reduces the risk of electric shock to the welding operator from potentially hazardous secondary welding circuit voltage. IP21S rating for environmental/safety protection Tolerant to variable power supply Seamless voltage and wire feed control Excellent mig welding with CO2 gas Excellent arc stability with all electrodes Spool Gun Connection Power Supply / Phases (V-Ph) 240v - 1 +/- 15% Duty 40 c as per AS/NZ Amps 200 Amps / Duty 25 c (approximate) 200 Amps 200 Amps / Output Current Range 30A/15.5V - 200A/24.0V Output Current Range / 10A/20.4V - 160A/28.0V Rated Power 7.8 KVA Rated Power / 9.2 KVA I Max 32.0 Amps / 38 0 Amps I ieff 14.6 Amps / 17.0 Amps Power factor 0.72 IP 21S Enclosure Class Wire Diameter Range (mm) 0.6, 0.8, 0.9 Dimensions Power Source (LxWxH) 528x250x425mm 19 Kg SPG A SpoolGun Option SPG200II 200A SpoolGun Option XA-TR Mig Trolley Option The XA-Mig200C is an inverter-based portable Mig welding machine with added Stick and Tig function. The Mig function allows you to weld with both Gas Shielded and Gasless wire. Easy step-less adjustment of voltage and wire feed make for easy setting of welding parameters giving excellent, professional welding results. Wire inch gives easy feeding of the wire during set up without gas wastage. Added welding capability delivers easy electrode welding with high quality results, including cast Iron, stainless and low hydrogen. Connection of the tig torch provides quality Lift Arc DC welding of steel, stainless steel and copper. An additional feature is the Spoolgun ready function that allows the simple connection of the SPG135 Spoolgun for the use of thin or softer wires that don t have the column strength to feed through standard mig torches, such as aluminium wire. A semi-industrial machine, it is lightweight and portable, an optional trolley provides off the fl oor operation and better manoeuvrability around the workshop. Being 240v single phase gives great portability, it can be run from any 15 Amp power socket providing more fl exible use for site and home workshop locations. Ideal for general engineers, maintenance workshop, rural workshop, panel beaters, home workshop. Designed and built to our specification. Certifi ed to - AS/NZ Product Code: XA-200CMTS-K Standard Package includes: XA-200C MTS Welding Machine, Mig Torch x 3m, Earth Lead & Arc Lead 25mm x 4m, Regulator 3

4 //STICK 200 Amp XA-200MTS //STICK Amp DC Welding Machine SpoolGun Ready Latest IGBT inverter technology Spool Gun connection Stick electrode () function welding with Lift Arc start VRD safety for Stick welding Wire inch & burn back control Semi industrial application Internal 2 roll geared wire feeder Euro style mig torch connection IP21S rating for environmental/safety protection Stepless voltage and wire feed control Excellent mig welding with CO2 gas Excellent arc stability for Mig/Tig/Stick welding Power Supply / Phases (V-Ph) 240v - 1 +/- 15% Duty 40 c as per AS/NZ Amps 200 Amps Duty 25 c (approximate) 200 Amps 200Amps Output Current Range 30A/15.5V - 200A/24.0V Output Current Range 10A/20.4V - 200A/28.0V Rated Power 7.5 KVA Rated Power 8.8 KVA I Max 31.4 Amps 36.6 Amps I ieff 18.6 Amps 31.4 Amps Power factor 0.75 IP 21S Wire eeder Gear Driven 2 Roll Wire Diameter Range (mm) 0.6, 0.8, 0.9, 1.0, 1.2 Dimensions Power Source (LxWxH) 900x400x670mm 57Kg SPG200II SpoolGun Option The XA-Mig200MTS is an inverter-based multi-function Mig welding machine with added Stick and Tig function. The Mig function allows you to weld with both Gas Shielded and Gasless wire applications. Easy step less adjustment of voltage and wire feed make for easy setting of welding parameters giving excellent, professional welding results. Wire inch allows easy feeding of the wire during set up without gas wastage and the Burn Back adjustment leaves the wire stick out ready for the next weld. An additional feature is the Spoolgun ready function that allows the simple connection of the SPG200 Spoolgun for the use of thin or softer wires that don t have the column strength to feed through standard mig torches, such as aluminium wire. Added Stick welding capability delivers easy and high quality welding using electrodes, including cast Iron, stainless and low hydrogen. Connection of the tig torch provides quality with Lift Arc start for welding of steel, stainless steel and copper. The machine is industrial rated and of solid construction, large industrial wheels allows easy and smooth manoeuvrability. Being 240v single phase gives great portability, it can be run from any 15 Amp power socket providing more fl exible use for site and home workshop locations. Ideal for general engineers, maintenance workshop, rural workshop, panel beaters, home workshop. Designed and built to our specifi cation. Certified to - AS/NZ Product Code: XA-200MTS-K Standard Package includes: XA-200MTS Machine, Mig Torch x 4m, Earth Lead & Arc Lead 25mm x 4m, Regulator 4

5 //STICK 250 Amp XA-250MTS //STICK Amp DC Welding Machine SpoolGun Ready Latest IGBT inverter technology Spool Gun connection Stick electrode () function welding with Lift Arc start VRD safety for Stick welding Wire inch & burn back control Semi industrial application Internal 2 roll geared wire feeder Euro style mig torch connection IP21S rating for environmental/safety protection Stepless voltage and wire feed control Excellent mig welding with CO2 gas Excellent arc stability for Mig/Tig/Stick welding Power Supply / Phases (V-Ph) 240v - 1 +/- 15% Duty 40 c as per AS/NZ Amps 250 Amps Duty 25 c (estimated) 250 Amps 250 Amps Output Current Range 30A/15.5V - 250A/26.5V Output Current Range 10A/20.4V - 250A/30.0V Rated Power 10.4 KVA Rated Power 11.8 KVA I Max 43 Amps 49 Amps I ieff 25.4 Amps 29.0 Amps Power factor 0.75 IP 21S Wire eeder Gear Driven 2 Roll Wire Diameter Range (mm) 0.6, 0.8, 0.9, 1.0, 1.2 Dimensions Power Source (LxWxH) 900x400x670mm 58Kg SPG200II SpoolGun Option The XA-Mig250MTS is an inverter-based multi-function Mig welding machine with added Stick and Tig function. The Mig function allows you to weld with both Gas Shielded and Gasless wire applications. Easy step less adjustment of voltage and wire feed make for easy setting of welding parameters giving excellent, professional welding results. Wire inch gives easy feeding of the wire during set up without gas wastage and the Burn Back adjustment leaves the wire stick out ready for the next weld. An additional feature is the Spoolgun ready function that allows the simple connection of the SPG200 Spoolgun for the use of thin or softer wires that don t have the column strength to feed through standard mig torches, such as aluminium wire. Added Stick welding capability delivers easy and high quality welding using electrodes, including cast Iron, stainless and low hydrogen. Connection of the tig torch provides quality with Lift Arc start for welding of steel, stainless steel and copper. The machine is industrial rated and of solid construction, large industrial wheels allows easy and smooth manoeuvrability. Being 240v single phase gives great portability, it can be run from any 15 Amp power socket providing more fl exible use for site and home workshop locations. Ideal for general engineers, maintenance workshop, rural workshop, panel beaters, home workshop. Designed and built to our specifi cation. Certified to - AS/NZ Product Code: XA-250MTS-K Standard Package includes: XA-250MTS Machine, Mig Torch x 4m, Earth Lead & Arc Lead 25mm x 4m, Regulator 5

6 //STICK 250 Amp XA-250C //STICK 250 Amp DC Welding Machine Lightweight & Portable Latest IGBT inverter technology Stick electrode () function welding with Lift Arc Start Industrial application Solid metal case construction Internal wire feeder, gear driven for up to 300mm Ø spool Euro mig torch connection IP21S rating for environmental/safety protection Tolerant to variable power supplys Seamless voltage and wire feed control Excellent mig welding with CO2 gas Excellent arc stability with all electrodes Light weight and portable Power Supply / Phases (V-Ph) 240v - 1 +/- 15% Duty 40 c as per AS/NZ Amps 224 Amps Duty 25 c (approximate) 250 Amps 224Amps Output Current Range 30A/15.5V - 250A/26.5V Output Current Range 10A/20.4V - 200A/33.0V Rated Power 10.8 KVA I Max 45 Amps 51 Amps I ieff 26.6 Amps 28 0 Amps Power factor 0.72 P 21S Wire eeder Type Gear Driven 2 Roll Wire Diameter Range (mm) 0.6, 0.8, 0.9, 1.0, 1.2 Dimensions Power Source (LxWxH) 585x280x440mm 35 Kg Dimensions Trolley (LxWxH) 880x430x410mm SPG200II SpoolGun Option XA-TR250 Mig Trolley Option The XA-250C is a new inverter-based portable Mig welding machine with added Stick and Tig function. The Mig function allows you to weld with both Gas Shielded and Gas-less wire applications. Easy step less adjustment of voltage and wire feed make for easy setting of welding parameters giving excellent, professional welding results. Wire inch gives easy feeding of the wire during set up without gas wastage and the Burn Back adjustment leaves the wire stick out ready for the next weld. Stick welding capability delivers easy electrode welding with high quality results, including cast Iron, stainless and low hydrogen. Connection of the tig torch provides quality (Lift Arc Start) welding of steel, stainless steel and copper. An additional feature is the Spoolgun ready function that allows the simple connection of the SPG200 Spoolgun for the use of thin or softer wires that don t have the column strength to feed through standard mig torches, such as aluminium wire. This an industrial machine that is lightweight and portable, an optional trolley with drawer and cylinder rack provides off the floor operation and better manoeuvrability around the workshop. Being 240v single phase gives great portability. Ideal for general engineers, maintenance workshop, rural workshop, panel beaters, home workshop. Designed and built to our specifi cation. Certifi ed to - AS/NZ Product Code: XA-250C-K Standard Package includes: XA-250C Welding Machine, Mig Torch x 4m, Earth Lead & Arc Lead 25mm x 4m, Regulator 6

7 //STICK 250 Amp XA-250SW //STICK 250 Amp DC Welding Machine Separate Wire eeder Latest IGBT Inverter Technology Stick Electrode () unction welding with scratch start Voltage & Wire eed Controls at Wire eeder Variable Inductance & Burn Back Controls Adjustable Crater Current Control Gas Check / Inch Wire 2T/4T Trigger unction Separate 4 Roll Geared Wire eeder LED Digital Display Euro mig torch connection 10m Interconnecting Cables Excellent arc stability for Mig/Tig/Stick welding Power Supply / Phases (V-Ph) /- 15% Duty 40 c as per AS/NZ Amps 225 Amps Duty 25 c (approximate) 250 Amps 225 Amps Output Current Range 30A/15.5V - 250A/26.5V Output Current Range 10A/20.4V - 250A/30.0V Rated Power 10.8 KVA I Max 45.0 Amps 51.0 Amps I ieff 26.6 Amps 28.0 Amps Wire eeder Type Separate Gear Driven 4 Roll IP 21S Dimensions Power Source (LxWxH) 595x280x440mm 41 Kg Dimensions Wire eeder (LxWxH) 630x235x420mm Weight Wire eeder 14Kg Length of Interconnecting Cable 10 m The XA-Mig250SW is an inverter-based Mig welding machine with added Stick and Tig function. The machine is equipped with a separate 4 roll gear driven wire feeder and 10m interconnecting cables. The Mig function allows you to weld with both Gas and Gasless wire applications. Adjustment of Voltage & Wire eed at the wire feeder make for easy setting of welding parameters and give the convenience of remote adjustment from the power source. Crater Current setting delivers perfect fi nishing of the weld, the electronic inductance offers fine adjustment of the arc characteristic and burn back adjustment leaves the wire stick out ready for the next weld. Wire inch and Gas Check provides set up of wire feed and gas setting with wastage of wire or gas. Added Stick welding capability delivers easy and high quality welding using electrodes, including cast Iron, stainless and low hydrogen. Connection of the tig torch provides quality DC Tig (scratch start) welding of steel, stainless steel and copper. 240v single phase gives great portability, it can be run from any 15 Amp power socket providing more fl exible use for site and home workshop locations. Ideal for general engineers, maintenance workshop, rural workshop, panel beaters, home workshop. Designed and built to our specifi cation. Certifi ed to - AS/NZ Product Code: XA-250SW-K Standard Package includes: XA-250 Welding Machine, 4 Roll Separate Wire eeder, Trolley with Draw, 10m Interconnecting Cables, Mig Torch x 4m, Earth Lead & Arc Lead x 5m, Regulator 7

8 //STICK 350 Amp XA-350MTS //STICK 350 Amp DC Welding Machine Lift Arc Tig, Spoolgun Ready Latest IGBT Inverter Technology Spool Gun connection Stick Electrode () unction with Lift Arc Step less voltage and wire feed control Wire inch & burn back control Variable Inductance & Burn Back Controls Gas Check / Inch Wire 2T/4T Trigger unction Internal 4 Roll Geared Wire eeder LED Digital Display Euro mig torch connection Excellent arc stability for Mig/Tig/Stick welding Power Supply / Phases (V-Ph) /- 15% Duty 40 c as per AS/NZ Amps 350 Amps Duty 25 c (approximate) 350 Amps 350 Amps Output Current Range 40A - 350A Output Current Range 20A - 350A Output Voltage Range 15-38V Rated Power 13.9 KVA Rated Power 15.0 KVA I Max 19.4 Amps 20.9 Amps I ieff 12.3 Amps 13.2 Amps Wire eeder Type Gear Driven 4 Roll Wire Speed Range m/min Efficiency 85% IP 21S Dimensions (LxWxH) 900x400x670mm Weight 60 Kg The XA-Mig350MTS is an inverter-based multifunction Mig welding machine with added Stick and Tig function. The Mig function allows you to weld with both Gas Shielded and Gasless wire applications. Easy step less adjustment of voltage and wire feed makes for easy setting of welding parameters giving excellent, professional welding results. Wire inch gives easy feeding of the wire during set up without gas wastage and the Burn Back adjustment leaves the wire stick out ready for the next weld. Electronic inductance control allows the fine tuning of the arc condition from hard to soft. The internal wire feed unit is heavy duty and 4 roll gear driven, guaranteeing smooth consistent wire feed. An additional feature is the Spoolgun ready function that allows the simple connection of the SPG20011 Spoolgun for the use of thin or softer wires. Added Stick welding capability delivers easy and high quality welding using electrodes, including cast Iron, stainless and low hydrogen. Connection of the tig torch provides quality (Lift Arc) welding of steel, stainless steel and copper. The machine is industrial rated and of solid construction, large industrial wheels allows easy and smooth manoeuvrability. Ideal for structural steel fabrication, general fabrication, maintenance workshops, rural workshops. Designed and built to our specifi cation. Certifi ed to - AS/NZ Product Code: XA-350MTS-K Standard Package includes: XA-350MTS, Mig Torch x 4m, Earth Lead & Arc Lead x 5m, Regulator SPG200II SpoolGun Option 8

9 //STICK 350 Amp XA-350SW /Tig/Stick 350 Amp DC Welding Machine Separate Wire eeder Latest IGBT Inverter Technology Stick Electrode () unction welding with scratch start Voltage & Wire eed Controls at Wire eeder Variable Inductance & Burn Back Controls Adjustable Crater Current Control Gas Check / Inch Wire 2T/4T Trigger unction Separate 4 Roll Geared Wire eeder LED Digital Display Euro mig torch connection 10m Interconnecting Cables Excellent arc stability for Mig/Tig/Stick welding Power Supply / Phases (V-Ph) /- 15% Duty 40 c as per AS/NZ Amps 350 Amps Duty 25 c (approximate) 350 Amps 350 Amps Output Current Range 50A/16.5V - 350A/31.5V Output Current Range 20A/20.8V - 350A/34.0V Rated Power 11.9 KVA I Max 31.0 Amps 34.0 Amps I ieff 24.0 Amps 26.0Amps Wire eeder Type Separate Gear Driven 4 Roll IP 21S Dimensions Power Source (LxWxH) 595x280x440mm 41 Kg Dimensions Wire eeder (LxWxH) 630x235x420mm Weight Wire eeder 14 Length of Interconnecting Cable 10 m The XA-Mig350SW is an inverter-based Mig welding machine with added Stick and Tig function. This is an industrial machine equipped with a separate 4 roll gear driven wire feeder and 10m interconnecting cables. The Mig function allows you to weld with Solid wires, luxcored Gas and Gasless wires. Adjustment of Voltage & Wire eed at the wire feeder make for easy setting of welding parameters and give the convenience of remote adjustment from the power source. Crater Current setting delivers perfect fi nishing of the weld, the electronic inductance offers fi ne adjustment of the arc characteristic and burn back adjustment leaves the wire stick out ready for the next weld. Wire inch and Gas Check provides set up of wire feed and gas setting with wastage of wire or gas. Added Stick welding capability delivers easy and high quality welding using electrodes, including cast Iron, stainless and low hydrogen. Connection of the tig torch provides quality (scratch start) welding of steel, stainless steel and copper. Ideal for heavy and structural welding applications, general engineers, maintenance workshop, rural workshops. Designed and built to our specifi cation. Certifi ed to - AS/NZ Product Code: XA-350SW-K Standard Package includes: XA-350 Welding Machine, 4 Roll Separate Wire eeder, Trolley with Draw, 10m Interconnecting Cables, Mig Torch x 4m, Earth Lead & Arc Lead x 5m, Regulator 9

10 //STICK 500 Amp XA-500SW //STICK 500 Amp DC Welding Machine Separate Wire eeder Latest IGBT Inverter Technology Stick Electrode () unction welding with scratch start Voltage & Wire eed Controls at Wire eeder Variable Inductance & Burn Back Controls Adjustable Crater Current Control Gas Check / Inch Wire 2T/4T Trigger unction Separate 4 Roll Geared Wire eeder LED Digital Display Euro mig torch connection 10m Interconnecting Cables Excellent arc stability for Mig/Tig/Stick welding Power Supply / Phases (V-Ph) /- 15% Duty 40 c as per AS/NZ Amps 500 Amps Duty 25 c (approximate) 500 Amps 500 Amps Output Current Range 50A/16.5V - 500A/31.5V Output Current Range 20A/20.8V - 500A/34.0V Rated Power 11.9 KVA I Max 31.0 Amps 34.0 Amps I ieff 24.0 Amps 26.0Amps Wire eeder Type Separate Gear Driven 4 Roll IP 21S Dimensions Power Source (LxWxH) 595x280x440mm 40.6 Kg Dimensions Wire eeder (LxWxH) 630x235x420mm Weight Wire eeder 14 Length of Interconnecting Cable 10 m The XA-Mig500SW is an inverter-based Mig welding machine with added Stick and Tig function. This is an industrial machine equiped with a separate 4 roll gear driven wire feeder and 10m interconnecting cables. The Mig function allows you to weld with Solid wires, luxcored Gas and Gasless wires. Adjustment of Voltage & Wire eed at the wire feeder make for easy setting of welding parameters and give the convenience of remote adjustment from the power source. Crater Current setting delivers perfect fi nishing of the weld, the electronic inductance offers fi ne adjustment of the arc characteristic and burn back adjustment leaves the wire stick out ready for the next weld. Wire inch and Gas Check provides set up of wire feed and gas setting with wastage of wire or gas. Added Stick welding capability delivers easy and high quality welding using electrodes, including cast Iron, stainless and low hydrogen. Connection of the tig torch provides quality (scratch start) welding of steel, stainless steel and copper. Ideal for heavy and structual welding applications, general engineers, maintainance workshop, rural workshops. Designed and built to our specifi cation. Certified to - AS/NZ Product Code: XA-500SW-K Standard Package includes: XA-500 Welding Machine, 4 Roll Separate Wire eeder, Trolley with Draw, 10m Interconnecting Cables, Mig Torch x 4m, Earth Lead & Arc Lead x 5m, Regulator 10

11 WIRE EEDER DRIVE ROLLERS WIRE EEDER DRIVE ROLLERS Drive Rollers MACHINE TYPE: C - 250SW - 350SGR- 350SW- 500SW 30mm 22mm V Groove Drive Roller - Steel Wire Part Number Description XA-DRV0608 XA Drive Roll V Groove mm Mig165/190/250/350/500 XA-DRV0810 XA Drive Roll V Groove mm Mig165/190/250/350/500 XA-DRV1012 XA Drive Roll V Groove mm Mig165/190/250/350/500 XA-DRV1216 XA Drive Roll V Groove mm Mig165/190/250/350/500 10mm Knurled Drive Roller - lux Core Wire Part Number Description XA-DRK0810 XA Drive Roll Knurled mm Mig165/190/250/350/500 XA-DRK1012 XA Drive Roll Knurled mm Mig165/190/250/350/500 XA-DRK1216 XA Drive Roll Knurled mm Mig165/190/250/350/500 U Groove Roller - Soft Wire Part Number Description XA-DRU1012 XA Drive Roll Knurled mm Mig165/190/250/350/500 XA-DRU1216 XA Drive Roll Knurled mm Mig165/190/250/350/500 MACHINE TYPE: 200SGR - 250SGR 35mm 25mm V Groove Drive Roller - Steel Wire Part Number Description XA-DRV20608 XA Drive Roll V Groove mm Mig200/250SGR XA-DRV20809 XA Drive Roll V Groove mm Mig200/250SGR XA-DRV20910 XA Drive Roll V Groove mm Mig200/250SGR XA-DRV21012 XA Drive Roll V Groove mm Mig200/250SGR XA-DRV21216 XA Drive Roll V Groove mm Mig200/250SGR 8mm Knurled Drive Roller - lux Core Wire Part Number Description XA-DRK20809 XA Drive Roll Knurled mm Mig200/250SGR XA-DRK20910 XA Drive Roll Knurled mm Mig200/250SGR XA-DRK21012 XA Drive Roll Knurled mm Mig200/250SGR XA-DRK21216 XA Drive Roll Knurled mm Mig200/250SGR U Groove Drive Roller - Soft Wire Part Number Description XA-DRU21012 XA Drive Roll U Groove mm Mig200/250SGR XA-DRU21216 XA Drive Roll U Groove mm Mig200/250SGR 11

12 PLUS CONCEPT DIGITAL MULTIUNCTION Pulse Mig Plus Concept is: Increased Welding Speed + Excellent Deposit Control + Greater Arc Stability + Deeper Penetration + Superior Weld Deposit Quality Traditional Pulse Plus Concept Plus Concept Benefits The forced dynamism of the PLUS CONCEPT achieves an ultra fast transfer droplet rate into the weld pool giving surprising results: it increase signifi cantly the welding speed (up to 45%) and, at the same time, it increases the penetration of the weld. Higher speed, better penetration and less spatter means less energy used during the deposit and reduced deformation during the welding. Traditional Pulse Plus Concept ull Deeper Penetration ull penetration and greater depth of penetration in thicker materials can be obtained with the new PLUS CONCEPT programs. The increase in the arc transfer speed allows the welding of materials up to 15mm in one pass, with only a narrow gap, eliminating costly weld preps. This new process maintains the arc stability and allows long stick-out to enable the welding to be completed in a single pass. With this solution, due to the increased welding speed, a lot of time is saved and the energy required for the same weld is much less. aster welding and energy reductions mean greater reduction of the distortion of the work-piece. Using PLUS CONCEPT in the application of heavy industry greatly improves the quality and notably reduces production costs. High Speed Pulse Mig Application PLUS CONCEPT has available Pulse programs for most materials with better weld control and a smoother arc. Special waveforms and very fast dynamics increase the weld ability of all materials. A precision arc, smoother waveform and high frequency transfer allow a precise arc with lower pressure in the welding pool. As a result, the welding speed is increased up to 45% with the same arc energy as found in standard machines. The simplicity of the pulse control setting allows a fast approach to any welding, irrespective of the thickness and this results in a colder weld with exceptional appearance. Up to now, in certain applications where the pulse mig process would not be recommended, because of the higher heat in the join (compared to conventional welding), but now it is possible to improve quality and effi ciency with the use of the new PLUS CONCEPT. Arc noise emissions are reduced with the smooth waveform in Pulse Mig too. It allows higher current applications without the typical loud noise of the arc. Double Pulse Program The DOUBLE PULSE program can be easily selected. A simple click in the front panel will switch from a standard pulse application to the advanced and fast double pulse without any other settings required from the operator. The frequency of the DOUBLE PULSE is easily adjusted from 0.5 to 4.0 pulses per second. DOUBLE PULSE offers more control over the weld pool improving out of position welding, better controls distortion and gives excellent wash and even leg length on fi llet welds, an added bonus is the improved cosmetic appearance of the weld likened to a fi nished weld. Mig Brazing Programs for brazing are easy to use and covers special applications for the car industry and any welding with zinc steel. Multi unction PLUS CONCEPT is not only an Innovative fast Pulse and fast -MAG machine but and mode are also available. The and function are top level technology and offer professional results for expert users. and mode has both manual and synergic adjustment, when the mode is selected, the user selects the welding process, which enables self regulation of the welding parameters by simply selecting the work-piece thickness. Special Lift arc start is used for tig arc ignition which makes the use of high frequency negligible. Remote control receptacle is available for connection of remote amperage controls. 12

13 PULSE WELDER MULTI 250K Pulse Mig MULTI 250K - Plus Concept High Productivity Welding Solution Amp DC Welder / Pulse / Double Pulse Manual PULSE Pulsed Double Pulsed DC LIT Manual Pulsed CELLULOSIC MA Manual VRD New Plus Concept Technology Latest European IGBT Inverter Technology High Speed Pulse Mig Mig Double Pulse High Speed Mig/Mag with Manual and Programs with Manual and Programs VRD Safety (Voltage Reduction Device) 2/4T Trigger unctions Up Slope - Down Slope Variable Start Current and Crater Current Simple selection of welding programs Simple interface for easy operation Accepts wide voltage supply variations ( V) Power Supply / Phases Rated Power Welding Current - Mig Welding Current - (A) Welding Current - Tig (A) Duty 40ºC 230v 1 Phase 9.1KVA 20A /14V - 250A /27.5V 20A /21V - 220A /28.8V 10A /10V - 250A /20.0V 250 Amps 160 Amps 90V VRD On - 15V, VRD Off - 65V 37.5 A 24.0 Amps Lift Arc Optional IP21S H No Load Voltage (V) Open Circuit Voltage (V) I Max I ieff Tig Arc Ignition Water Cooling Standards ISO/IEC Size (mm) 340 x 400 x 620 Weight (kg) 24 Interactive ront Panel The Ergonomic and Auto Learning System is used in the powerful front panel interface where welding mode selection, program selection, adjustments and special settings coexist in a rugged panel, whereby a simple touch the user can instantly see the results they have selected. The MULTI-250K is the most powerful multifunction Single Phase System that state of the art technology can offer. An industrial machine with multiple welding functions including Pulse Mig, Double Pulse Mig, High Speed Mig,, and DC (Stick). User friendly programs with synergic function are provided for all the welding processes making it suitable for even the inexperienced user. The Multi-250K encompasses all facets of the new PLUS CONCEPT technological development. PLUS CONCEPT is an innovative solution that is revolutionising the welding industry. Now, high effi ciency welding is possible with Gas Metal Arc Welding, Pulse Arc and standard applications. The forced dynamism of the PLUS CONCEPT achieves an ultra fast transfer droplet rate into the weld pool giving surprising results: it increase signifi cantly the welding speed (up to 45%) and, at the same time, it increases the penetration of the weld. Higher speed, better penetration and less spatter means less energy used during the deposit and reduced deformation during the welding. Using the Double Pulse function provides the ability to produce welds with like finish with excellent control over the weld pool. The Multi-250K is a professional industrial machine that is lightweight and has available an optional trolley with gas bottle support, being 230v single phase gives great portability, it can be run from any 15 Amp power socket providing more flexible use for site and home workshop locations. Ideal for general engineers, boat building, sheet metal workshops, stainless steel fabricators, panel beaters, transport engineering and home workshops, Designed and built to meet with European norms conformity. Product Code: V0066AA Standard option includes: Multi250K, XA26 x 3m Air Cooled Mig Torch, Earth Lead 35mm x 4m, Argon Regulator 13

14 PULSE WELDER MULTI 400KW Pulse Mig MULTI 400KW - Plus Concept High Productivity Welding Solution Amp DC Welder / Pulse / Double Pulse Manual PULSE Pulsed Double Pulsed DC LIT Manual Pulsed CELLULOSIC MA Manual VRD New Plus Concept Technology Latest European IGBT Inverter Technology High Speed Pulse Mig Mig Double Pulse High Speed Mig/Mag with Manual and Programs with Manual and Programs VRD Safety (Voltage Reduction Device) 2/4T Trigger unctions Up Slope - Down Slope Variable Start Current and Crater Current Simple selection of welding programs Simple interface for easy operation Accepts wide voltage supply variations ( V) Power Supply / Phases Rated Power Welding Current - Mig Welding Current - (A) Welding Current - Tig (A) Duty 40ºC 400v 3 Phase 18KVA 20A /14V - 400A /27.5V 20A /21V - 400A /28.8V 10A /10V - 400A /20.0V 400 Amps 310 Amps 90V VRD On - 15V, VRD Off - 65V 26.0 Amps 18.0 Amps Lift Arc Optional IP21S H No Load Voltage (V) Open Circuit Voltage (V) I Max I ieff Tig Arc Ignition Water Cooling Standards ISO/IEC Size (mm) 340 x 400 x 620 Weight (kg) 30 Interactive ront Panel The Ergonomic and Auto Learning System is used in the powerful front panel interface where welding mode selection, program selection, adjustments and special settings coexist in a rugged panel, whereby a simple touch the user can instantly see the results they have selected. The MULTI-400KW is a complete and powerful multifunction DC inverter welding machine - 3 phase 400V. An industrial machine with multiple welding functions including Pulse Mig, Double Pulse Mig, High Speed Mig,, and DC (Stick). User friendly programs with synergic function are provided for all the welding processes making it suitable for even the inexpe- rienced user. The Multi-400KW encompasses all facets of the new PLUS CONCEPT technological development. PLUS CONCEPT is an innovative solution that is revolutionising the welding industry. Now, high efficiency welding is possible with Gas Metal Arc Welding, Pulse Arc and standard applications. The forced dynamism of the PLUS CONCEPT achieves an ultra fast transfer droplet rate into the weld pool giving surprising results, it increases signifi cantly the welding speed (up to 45%) and, at the same time, it increases the penetration of the weld. Higher speed, better penetration and less spatter means less energy used during the deposit and reduced de- formation during the welding. Using the Double Pulse function provides the ability to produce welds with like fi nish with excellent control over the weld pool. The Multi-400KW is a professional industrial machine that is supplied complete with water cooler for water cooled torch connection, trolley with gas bottle support, also with Push Pull Torch interface connection. Ideal for boat building, heavy fabrication and general engineering, sheet metal workshops, stainless steel fabricators, transport engineering, panel beaters, repair and maintenance workshops, Designed and built to meet with European norms conformity. Product Code: MULTI400KW-K Standard option includes: Multi400KW, XA401W Water Cooled Mig Torch, Earth Lead 35mm x 4m, Argon Regulator 14

15 PULSE WELDER MULTI 400K Pulse Mig Design and Style A robust and industrial concept has been developed for outside use whilst maintaining complete fl exibility and full operation. The machines can be developed according to the needs of the user. rom a simple compact air cooled torch solution, to a machine complete with cooler unit, an external wire feeder can be connected for dual applications, the addition of a Push Pull Gun is simply done via our plug and play connection. Any extra accessory is auto recognised and then auto installed by the central process control and works in the correct mode without the input or knowledge of the operator. E.g. Water cooling unit starts and stops alone only when it is necessary. The central controls monitor any function of the equipment and accessories and alert the user, on the front panel, every time something needs checking. Separate Wire eeder Connection of the optional separate wire feeder, provides dual independent wire feed operation from the machine. The digitally controlled wire feeder can feed any kind of wire with high efficiency. It is completely independent from the power source, a digital communication connects the wire feeder control to the power source and compensates the resistance of the interconnecting cable. An innovative communication system allows the use of interconnecting cables up to 50 meters without affecting the arc. All the welding parameters are easy to set via the front panel of the wire feeder eliminating the need to go to the power source. The wire feeder is robust and developed also for on site welding and is constructed to be lightweight and portable. It can be used with undercarriage wheels for easy movement in the welding area or it can be located on a turning support fixed to the top of the machine. The dimensions are as small as possible, but for a special use where weight must be reduced an adapter to accept smaller spools of wire is available. With this adapter and a 5kg spool of wire installed the maximum weight is 13 kg and this solution is the lightest for off shore, on site transportable requirement. The wire feeder is also ideal for stationary applications where the compact dimensions are important. MULTI 400KW MULTI 400KW-SW On/Off Switch Industrial Trolley Gas Bottle Rack Euro Mig Torch Connection Push Pull Torch Motor Connector Control Panel Output Terminals Tig Torch Gas Connector Tig Torch Trigger Remote Plugs Water Cooled Torch Hose Connectors Industrial Caster Wheels Optional Separate Wire eeder Interconnecting Interface Cable Enclosed Water Cooler Digital Wire Drive Digital Torch Control 4 Roll - Geared Drive 15