Y.Doç.Dr.Seçil Savaşaneril Tüfekci

Transcription

1 Y.Doç.Dr.Seçil Savaşaneril Tüfekci Middle East Technical University Phone: (312) Industrial Engineering Department Fax: (312) Dumlupınar Bulvari No: ANKARA Education Ph.D. Manufacturing/Logistics, Aralık 2004 Georgia Institute of Technology, School of Industrial and Systems Engineering, Atlanta, GA, USA Thesis title: Collaborative Procurement and Due Date Management in Supply Chains M.S. Manufacturing/Logistics, Mayıs 2002 Georgia Institute of Technology, School of Industrial and Systems Engineering, Atlanta, GA, USA B.S. Industrial Engineering, Haziran 1998 Middle East Technical University, Industrial Engineering Department, Ankara Publications Ö.Yılmaz, S.Savaşaneril (2011), Collaboration among small shippers in a transportation market, European Journal of Operational Research, to appear. S.Savaşaneril, N.Erkip (2010), An Analysis of Manufacturer Benefits under Vendor Managed Systems, IIE Transactions, 42, 7, S.Savaşaneril, P.M.Griffin, P.Keskinocak (2010), Dynamic Due Date Quotation for an M/M/1 Base- Stock Inventory Queue, Operations Research, 58, 2, P. Keskinocak, S. Savaşaneril (2008), Collaborative Procurement among Competing Buyers, Naval Research Logistics, 55, 6, P. Griffin, P. Keskinocak, and S. Savasaneril (2005), The Role of Market Intermediaries for Buyer Collaboration in Supply Chains, in Applications of Supply Chain Management and E-Commerce Research in Industry, E. Akcali, J. Geunes, P.M. Pardalos, H.E. Romeijn, and Z.J. Shen (editors), Springer-Verlag, Chapter 3, Barutçuoğlu,D. Demirtaş, B.Dilan, R.Düzgün, M.Köksalan, S.Savaşaneril (2010), Bir Otomotiv Firması için Araç Sevkiyatı ve Dağtım Merkezi Yer Seçimi Problemi, Endüstri Mühendisliği Dergisi, 21, 1, G. Bilici, Ö. Çolak, F. Đnaltekin, T. C. Küçük, S. Yetimoğlu, M. Köksalan, S. Savaşaneril (2007), Fabrika Đçi Çekme Esaslı Taşıma Sistemi Tasarımı (The Design of a Pull-Type Materials Handling System), Endüstri Mühendisliği Dergisi, 18, 3,

2 Conference proceedings Satır, B., S. Savaşaneril, Y. Serin, Benefits of Inventory Pooling in Service Parts Management Systems, Manufacturing and Service Operations Management Proceedings, Boston, Massachusetts, USA, June S.Savaşaneril, N.Erkip, An Analysis of Manufacturer Benefits under Vendor Managed Systems, Manufacturing and Service Operations Management Proceedings, Boston, Massachusetts, USA, June S. Savaşaneril, P.M.Griffin, P.Keskinocak, Analysis of Lead time Quotation Policies for Base-Stock Systems, Manufacturing and Service Operations Management Proceedings, Atlanta, Georgia, USA, June Satır, B., S. Savaşaneril, Y. Serin, Yedek Parça Yönetim Sistemlerinde Envanter Havuzlamanın Faydaları, YA/EM 28. Congress, Galatasaray University, Đstanbul, Temmuz S. Savaşaneril, N. Erkip, Tedarikçi Kontrollü Envanter Yönetimi Uygulamasının Tedarikçinin Karlılığı Yönünden Analizi, YA/EM 28. Congress, Galatasaray University, Đstanbul, Temmuz S. Savaşaneril, P.M.Griffin, P.Keskinocak, Envanter Sistemlerinde Esnek Teslim Tarihi Bildirme Politikalarının Analizi, YA/EM 29. Congress, Kocaeli, Temmuz Conference presentations Erkip N, S.Savaşaneril, An Analysis of Manufacturer Benefits Under Vendor-Managed Systems, INFORMS Annual Meeting, Austin, Texas, USA, November, Satır, B., S. Savaşaneril, Y. Serin, Pooling Through Lateral Transshipments in Decentralized Spare Parts Systems, ISIR 16th International Symposium on Inventories, August, Satır, B., S. Savaşaneril, Y. Serin, Benefits of Pooling in Service Parts Inventory Systems, 15th INFORMS Applied Probability Conference, Cornell, New York, USA, July Usta, M., S. Savaşaneril, Y. Serin, Competition and Collaboration in a Service Parts Management System, 23rd EURO Conference, Bonn, Germany, July 5-8 Savaşaneril, S., N.Erkip, When should the Vendor Manage the Inventory: An Analysis of Manufacturer Benefits, EURO Working Group on Stochastic Modeling, Koç University, Đstanbul, June 23-25, Savaşaneril, S., P.M.Griffin, P. Keskinocak, Analysis of Lead Time and Inventory Flexibility for Base Stock Inventory Systems, INFORMS Annual Meeting, Seattle, WA, USA, Kasım Savaşaneril, S., N.Erkip, Analysis of Supplier's Benefits under Vendor Managed Inventory, INFORMS Annual Meeting, Seattle,WA, USA, November

3 Savaşaneril, S., P.M.Griffin, P.Keskinocak, Dynamic Due Date Quotation for Base-Stock Inventory Systems, INFORMS Annual Meeting, Denver, CO, USA, October Savaşaneril, S., Keskinocak P., Collaborative Procurement, INFORMS Annual Meeting,Atlanta, GA, USA, October Töre, N., S. Savaşaneril, Y. Serin, Đki-Seviyeli Bir Üretim Sisteminde Envanter Yönetimi ve Ürün Đkamesi, YA/EM 30. Congress, Sabancı University, Đstanbul, Usta, M., S. Savaşaneril, Y. Serin, Yedek Parça Yönetim Sistemlerinde Rekabet ve Đşbirliği, YA/EM 29. Congress, Bilkent University, Ankara, Özen Erdoğdu, S.Savaşaneril, Benefits of Vendor Managed Inventory Policy In a Manufacturer- Retailer Supply Chain, YA/EM 29. Congress, Bilkent University, Ankara, Savaşaneril, S., Keskinocak P., Satın Alma Sürecinde Firmalar Arası Đşbirliği, YA/EM 25. Congress, Koç Universitesi, Đstanbul, Temmuz Seminars/Workshops Erkip N., S.Savaşaneril, An Analysis of Manufacturer Benefits under Vendor Managed Systems, Industrial Management and Logistics Department, Faculty of Engineering, Lund University, Sweden, Savaşaneril S., Erkip N., An Analysis of Benefits of Pooling in Service Parts Inventory Systems, Bilkent University, Industrial Engineering Department, Savaşaneril, S., Keskinocak P., Collaborative Procurement between Competing Buyers with Capacity Restrictions, TU/e-OPAC and METU-IE Workshop, Eindhoven University of Technology, Eindhoven, The Netherlands and Middle East Technical University, Ankara, October, Savaşaneril, S., B. Satır, M. Usta, Y. Serin, An Analysis of Benefits of Pooling in Service Parts Inventory Systems, Bilkent University, Industrial Engineering Department, Savaşaneril S., Erkip N., When should the Vendor Manage the Inventory: An Analysis of Manufacturer Benefits, Bilkent University, Business Administration, April, S.Savaşaneril, P.M.Griffin, P.Keskinocak, Dynamic Due Date Quotation for Base-Stock Inventory Systems, Bilkent University, Industrial Engineering Department, May Savaşaneril S., N. Erkip, Analysis of Supplier s Profitability under Vendor Managed Inventory, 2 nd TU/e-OPAC and METU-IE Workshop, Eindhoven, The Netherlands, November Satır B., S. Savaşaneril, Y. Serin, Inventory Rationing and Order Acceptance Problem in a Repair System with Two Customer Types, 2 nd TU/e-OPAC and METU-IE Workshop, Eindhoven, The Netherlands, November

4 S.Savaşaneril, P.M.Griffin, P.Keskinocak, Dynamic Due Date Quotation for Base-Stock Inventory Systems, METU, Industrial Engineering Department, Nisan Research Projects Principle Investigator, TÜBĐTAK-1001 Program, Grant No: 108M004 Project Title: Benefits of Inventory Pooling and Information Sharing in Service Parts Management Systems Project Duration: 27 months (June September 2010) Project Budget: TL. Other Researchers: Assoc.Prof. Dr. Y.Serin. Principle Investigator, METU-BAP, Grant No: Project Title: An Analysis of Manufacturer Benefits under Vendor Managed Inventory Agreements Project Duration: 18 months (Jan July 2007) Project Budget: 5.000TL Thesis Studies PhD Students B.Satır (co-advisor Y.Serin, Graduation date: June 2010) Nurşen Töre (co-advisor Y.Serin, ongoing) M.Sc Students Ö.Erdoğdu (Feb 2009) Ö.Yılmaz (Dec 2009) Ece Sayın (Sept 2010) Hürdoğan Güneş (Sept 2010, co-advisor P.Bayındır) Cumhur Kaman (May 2011, co-advisor Y.Serin) Meriçcan Usta (Dec 2010, co-advisor Y.Serin) Erman Atak (July 2011, co-advisor Y.Serin) Şükriye Özkır (expected graduation date, Spring 2012) Positions Held Assistant Professor September Instructor February 2005-September 2005 Research Assistant September December 2004 Georgia Institute of Technology, School of Industrial and Systems Engineering Courses assisted ISyE 6201 Manufacturing Systems ISyE 6203 Transportation and Supply Chain Systems ISyE 3101 Introduction to Supply Chain Modeling: Manufacturing& Warehousing ISyE 3025 Engineering Economy Research Assistant September September 2000 Georgia Institute of Technology, School of Industrial and Systems Engineering W. M. Keck Virtual Factory Laboratory 4

5 Research Assistant September August 1999 Middle East Technical University, Industrial Engineering Department, Ankara, TURKEY Courses assisted IE 463 Quality Planning and Control Courses Taught METU, Industrial Engineering Department IE 518 Supply Chain Management (Spring 2008, 2010, 2011) *IE 490 Topics in IE: Supply Chain Management (Spring 2006, 2007, *developed by herself) IE 361 Operation Research III (Fall 2008, 2009) IE 347 Engineering Economics and Cost Analysis II (Fall 2005, 2006, 2007) IE 266 Engineering Statistics II (Spring 2005, 2006, 2009, 2011) EM 506 Project Management (Spring 2005) Georgia Institute of Technology, School of IsyE ISyE 3103 Introduction to Supply Chain Modeling: Logistics (Fall 2002) Referee Computers and Industrial Engineering Computers and Operations Research European Journal of Operational Research IIE Transactions Interfaces International Journal of Production Economics Journal of the Operational Research Society Manufacturing and Service Operations Management Naval Research Logistics Omega Production and Operations Management Wiley Encyclopedia of Operations Research and Management Science Handbook of Production Planning, Kluwer International Series in Operation Research and Management Science, Advancing the State-of-the-Art Subseries, K. Kempf, P. Keskinocak, and R. Uzsoy editors. Manufacturing and Service Operations Management Conference METU Studies in Development Member of the jury, Student Projects, 26.YA/EM Congress, Kocaeli University, Industrial Engineering, Member of the jury, Student Projects, 25. YA/EM Congress, Koç University, Industrial Engineering, Hacettepe University, BAP Turkish Journal of Electrical Engineering & Computer Sciences TÜBĐTAK 1001, 1507 nad CAREER programs 5