New potential for hand-guided routers
|
|
- Kristian Montgomery
- 7 years ago
- Views:
Transcription
1 Routing
2 386 Routing Overview Bosch Accessories 11/12 New potential for hand-guided routers Bosch provides a compact, clearly structured range of router bits for a wide variety of applications. And this at an attractive price/quality ratio. Bosch s GOF-CE routers are characterized by their power and precision. Together with the new router bits and standard applications, they provide full system competence. Router bits from Bosch For standard applications in the workshop and on the construction site. All made with durable tungsten-carbide quality and an 8 and 12 mm shank. Clear range structure: router bits for profiling and router bits for joining. Shaping bits: for profiling The range of router bits from Bosch covers the most important profiles. A total of 38 dimensions. Rounding over bits Core box bits A B C D E F Edge forming bits G H Chamfer/ laminate trim bits V-groove bits
3 Bosch Accessories 11/12 Routing Overview 387 Beading bits Guided staff bead bits and staff bead bits Pilot panel bits Precise bits: for joining Straight bits, tongue jointing bits, rebating bits and dovetail bits for the most common joints. In addition to this, hinge mortising bits and laminate trim bits. A total of 40 dimensions. Straight bits Slotting cutters Tongue jointing bits Hinge mortising bits Rebating bits Laminate trim bits Dovetail bits
4 388 Routing Overview Bosch Accessories 11/12 Quality that pays off It is an attractive offer when economic efficiency and quality are combined. All Bosch router bits have high-quality tungsten carbide cutters, optimized cutting geometry and produce a precision cut that is the result of many years of experience. The benefit of this lies in the fitting accuracy and the long lifetime. Tungsten carbide plates Material as defined in ISO K10. With diamond-ground cutting geometry. Silver solder EN Standard 847 TC plates welded with silver solder to the router bit s body. This ensures a high-quality, secure joint. Bosch s standard router bits comply with the latest European standard, and are combined with economically efficient, brand-specific benefits for the user. One or two flutes? Router bits with very small diameters have one flute, for better chip clearance. Two-flute router bits are for medium and large diameters. Safe clamping length The mark on the shank indicates the required clamping length. Working length in line with the market The working length of the router bits is tailored to the nominal thickness of conventional solid wood and wooden materials, up to 25 mm. Up to 38 mm with extra-long router bits. Calculated safety Relevant construction features for clean, low-recoil working: a ) Chip gap limit b ) Limit of chip thickness : max. 1.1 mm a b
5 Bosch Accessories 11/12 Routing Overview 389 Better results when used in the right direction Quality has a lot to do with the competence of the power tools and the precision of the router bits. In addition to this, our practical experience can be communicated for the benefit of the customer. Four-sided routing around workpieces 1 + 2: first of all, the face ends are routed 3 + 4: then the longitudinal edges are routed, along the grain Advantage : corners that are splintered when routing the face ends can be corrected. 2 4 Routing curved edges Suitable accessories for clean routing: pilot, ball bearing pilot or template with template guide. 3 1 Risks when working without a stop If the router is pulled towards the user, it drifts to the right. If the router is thrust away from the user, it drifts to the left. Routing with a locating stop and routing grooves The correct feed direction is crucial with regard to quality. Routing with a locating stop: thrusting the router. Groove cutting: routing in the counter direction. Safe upcut routing When upcut routing is performed, the stop is cleanly pulled against the workpiece: safe and clean working. Upcut routing Unsafe downcut routing When downcut routing is performed, the machine is pressed away by the workpiece: unclean edges, risk of the machine drifting off. Downcut routing
6 390 Routing Routers Bosch Accessories 11/12 Accessories for Bosch routers Parallel guides for Bosch routers Complete with fine adjustment Suitable for all routing work parallel to the workpiece edge Diameter mm Parallel guide Appropriate for GMF 1400 CE; GOF 900 CE; GOF 1200 A; GOF 1300 CE; GOF 1300 ACE; GOF 1600 A; GOF 1600 CE; GOF 2000 CE Professional; POF 1100; POF C0a Circle guide and guide rail adapter set for Bosch routers To use this accessory, screw the centering pin into the guide rail adapter Adapter also enables guide rails FSN 70 ( ) and FSN 140 ( ) to be used with the router Continuously variable adjustment of the router enables cuts at the following circle radii: With GOF 900: 95 to 655 mm With GOF 1200: 100 to 660 mm With GOF 1300: 100 to 660 mm With GOF 2000: 100 to 660 mm With POF 800: 95 to 655 mm Length mm Curve cutting guide Appropriate for GMF 1400 CE; GOF 900 CE; GOF 1200 A; GOF 1300 CE; GOF 1300 ACE; GOF 1600 A; GOF 1600 CE; GOF 2000 CE Professional; POF 800; POF 1100; POF 1100 AE; POF 1200 AE; POF 1300; POF 1300 ACE; POF 1400 ACE C1a ¹Minimum order quantity. The minimum order quantity is a fixed quantity of packs.
7 Bosch Accessories 11/12 Routing Routers 391 Circle guide and guide rail adapter set for Bosch routers Length mm Guide rail FSN 70 Pair of G-clamps not included Appropriate for GKS 18 V; GKS 24 V; GKS 55; GKS 55 CE; GKS 65; GKS 65 CE; GKS 66 CE; GKS 68 B; GKS 68 BC; GKS 85; GMF 1400 CE; GOF 900 CE; GOF 1300 CE; GOF 1600 CE; GOF 2000 CE; GUF 4-22 A Professional; PKS 40; PKS 54; PKS 54 CE; PKS 66; PKS 66 CE; POF 1200 AE; POF 1400 ACE C0a Guide rail FSN 140 Pair of G-clamps not included (rubber lip as spare part ) Appropriate for GKS 18 V; GKS 24 V; GKS 55; GKS 55 CE; GKS 65; GKS 65 CE; GKS 66 CE; GKS 68 B; GKS 68 BC; GKS 85; GMF 1400 CE; GOF 900 CE; GOF 1300 CE; GOF 1600 CE; GOF 2000 CE; GUF 4-22 A Professional; PKS 40; PKS 54; PKS 54 CE; PKS 66; PKS 66 CE; POF 1200 AE; POF 1400 ACE C0a Extra-long guide bars for Bosch routers For routing work that standard guide bars are not long enough for Diameter mm Length mm Guide bar Appropriate for GMF 1400 CE; GOF 900 CE; GOF 1200; GOF 1200 A; GOF 1300 ACE; GOF 1300 CE; GOF 1600 A; GOF 1600 CE; GOF 2000 CE Professional Appropriate for all routers with guide rod diameter 10 mm, distance between holes 100 mm P0b ¹ Minimum order quantity. The minimum order quantity is a fixed quantity of packs.
8 392 Routing Routers Bosch Accessories 11/12 Handle for Bosch routers Handle For circle cutting guide and sub-frame P0f Edge routing attachment for Bosch routers For machining straight end edges or curved longitudinal edges For machining both straight end edges and curved longitudinal edges Edge routing attachment Appropriate for GGS 27; GGS 27 C Professional; POF 600 ACE C0a Collets for tool versions as of February 85 for Bosch routers Collets for holding the router bit Diameter inch Diameter mm Collet without locking nut Appropriate for GGS 27; GGS 27 C Professional; POF 500 A; POF 600 ACE 1/ P1c P1c P1c ¹Minimum order quantity. The minimum order quantity is a fixed quantity of packs.
9 Bosch Accessories 11/12 Routing Routers 393 Collet/nut set for Bosch routers Note: We recommend using the correct size of collet rather than working with a shank sleeve Diameter inch Diameter mm Key width mm Collet Appropriate for GOF 900; GOF 900 A; GOF 900 ACE; GOF 900 CE Professional; POF 800 ACE; POF 1100 AE; POF 1200 AE; POF 1300 ACE; POF 1400 ACE 1/ P0b P0b Collet Appropriate for GMF 1400 CE; GMF 1600 CE; GOF 1200; GOF 1200 A; GOF 1300 ACE; GOF 1300 CE; GOF 1600 CE; GOF 2000 CE Professional 1/ P0b / P0b P0b P0b Collet Appropriate for GOF 1600 A; GOF 1700 ACE Professional 1/ P0b / P0b ¹ Minimum order quantity. The minimum order quantity is a fixed quantity of packs.
10 394 Routing Routers Bosch Accessories 11/12 Template guides with quick fastening lock, tool-free for Bosch routers Indispensable for working with templates (template guide runs along the template and transfers the shape onto the workpiece) Bayonet lock for rapid, tool-free changing Note: When making a template that is to be used with a template guide, include the distance between the guide and the router bit in your calculations. This distance is calculated using the following formula: (diameter (Ø) of template guide (K) diameter (Ø) of router bit (F))/2 ØF ØK Diameter mm Template guide with quick fastening lock, tool-free Appropriate for GKF 600; GMF 1400 CE; GMF 1600 CE; GOF 900; GOF 900 ACE; GOF 900 CE; GOF 1600 CE; GOF 2000 CE Professional; POF 800; POF 1100 AE; POF 1200 AE; POF 1300 ACE; POF 1400 ACE P0b P0b P0b P0b P0b Dust extraction adapters for Bosch routers Adapter for router Appropriate for GOF 2000 CE Professional P0b Adapter for routers Appropriate for GOF 900; GOF 900 CE; GOF 1200; GOF 1300 CE; GOF 2000 CE; GMF 1400 CE Professional P0b Adapter for routers Appropriate for POF 400 A; POF 500 A; POF 600 ACE C1a ¹Minimum order quantity. The minimum order quantity is a fixed quantity of packs.
11 Bosch Accessories 11/12 Routing Routers 395 Accessories for Bosch Multifunction Router GMF 1400 CE Dust extraction adapter Appropriate for GMF 1400 CE Professional P1b Adjusting screw Appropriate for GMF 1400 CE Professional, GMF 1600 CE Professional P1b Hexagon socket spanner Appropriate for GMF 1400 CE Professional, GMF 1600 CE Professional P1b ¹ Minimum order quantity. The minimum order quantity is a fixed quantity of packs.
12 396 Routing Palm Router Bosch Accessories 11/12 Accessories for Bosch Palm Router GKF 600 Professional Accessories for Bosch Palm Router GKF 600 Professional Diameter inch Diameter mm Parallel guide C0a Pilot C0a Round base plate P1d Angled router cage C0a Base plate with handle and dust extraction outlet C0a Collet 1/ P0b ¹Minimum order quantity. The minimum order quantity is a fixed quantity of packs.
13 Bosch Accessories 11/12 Routing Universal Router, Biscuit Jointer 397 Accessories for Bosch universal routers and biscuit jointers Blade cutters, 105 mm diameter, for Bosch universal router For cutting grooves, biscuit joints and flat dowels in wood Easy production of country style look with the versatile Bosch universal router and the appropriate Bosch straight bit Diameter mm Number of teeth Width mm Blade cutter Appropriate for Universal Router GUF 4-22 A Professional, Wall Chaser PSF 22 A C1c Blade cutter For Universal Router GUF 4-22 A, Wall Chaser PSF 22 A, only together with backing flange also for Biscuit Jointer GFF 22 A Appropriate for GOF 900 A; GOF 900 ACE; GOF 1200 A; GOF 1300 ACE Professional; POF 800 ACE; POF 1100; POF C1c Blade cutter Appropriate for Biscuit Jointer GFF 22 A Professional C1c Biscuit dowels for Bosch biscuit jointer For perfect joints Length mm Width mm Height mm Biscuit dowels GR C0a ¹ Minimum order quantity. The minimum order quantity is a fixed quantity of packs.
14 398 Routing Universal Router, Biscuit Jointer Bosch Accessories 11/12 Handle for Bosch one-handed angle grinders and compact belt sanders Helps you guide the machine safely and easily Handle Appropriate for GUF 4-22 A Professional; PSF 22-A and all Bosch one-handed angle grinders and compact belt sanders with M10; PWS P0f ¹Minimum order quantity. The minimum order quantity is a fixed quantity of packs.
New potential for hand-guided routers
Routing Back 652 Routing Overview Bosch Accessories 11/12 New potential for hand-guided routers Bosch offers a compact, clearly structured range of router bits for a wide range of applications. And this
More informationUNITED STATES CUTTING TOOL INSTITUTE Product Groupings for Standards Activities CUTTING TOOL PRODUCTS
CUTTING TOOL PRODUCTS 1. BORING ISO 5609 Boring bars for indexable inserts Dimensions ISO 6261 Boring bars (tool holders with cylindrical shank) for indexable inserts Designation JIS B 4128 Boring bars
More informationGate Leg Drop Leaf Table Plans
Preparing the table top blanks: Cut and glue enough 3/4 stock to make three panels 40 long by 24 wide (they will be cut to final size at a later time). While the glue dries we will work on the legs. Preparing
More informationPrecision made in Europe. As per DIN 8606. The heart of a system, versatile and expandable.
1 von 9 Precision made in Europe. As per DIN 8606. The heart of a system, versatile and expandable. Main switch with auto-start protection and emergency off. Precision lathe chuck as per DIN 6386 (Ø 100mm).
More informationGo-kart for little race-drivers
Go-kart for little race-drivers Drill and drive. Go-kart What it lacks in speed, it more than makes up for in fun: the go-kart will excite little race-drivers. 1 Introduction It s only a go-kart, but it
More informationMaking Wooden Hinges
Making Wooden Hinges By Alex Reid - www.mokkou.jp Materials and tools used - 3.2mm straight router bit - 1/8 round-over router bit - Flush-cut straight bit (with bearing on bottom) - Finger-joint jig -
More informationHome"" """"> ar.cn.de.en.es.fr.id.it.ph.po.ru.sw
Home"" """"> ar.cn.de.en.es.fr.id.it.ph.po.ru.sw Milling of Grooves, Elongated Slots and Break-throughs - Course: Techniques for machining of material. Trainees' handbook of lessons (Institut fr Berufliche
More informationChapter 6 Machining Center Carbide Insert Fundamentals
This sample chapter is for review purposes only. Copyright The Goodheart-Willcox Co., Inc. All rights reserved. N10G20G99G40 N20G96S800M3 N30G50S4000 N40T0100M8 N50G00X3.35Z1.25T0101 N60G01X3.25F.002 N70G04X0.5
More informationMGB Chrome Bumper Conversion
MGB Chrome Bumper Conversion Installation Instructions For 1974 1/2-1980 MGB This kit requires cutting, welding, and painting. Professional installation recommended. Note: Every MGB body is slightly different
More informationRouter Table Plans. www.bobsplans.com
www.bobsplans.com Router Table Plans Increase the capabilities of your router with this weekend project. Features a sliding fence with EZ-Mount clamps. These clamps are simple to make and grip tightly
More informationRouter. A. Identify the major parts of the router. B. Complete a written test on safety and operating procedures of the router with 100% accuracy.
Router I. Competencies Given a properly adjusted router, instruction and demonstration of use, each student will be able to: A. Identify the major parts of the router. B. Complete a written test on safety
More informationWood Drilling.
Wood Drilling www.irwin.com A Century of Quality and Innovation In 1885, the IRWIN Auger Bit Company was formed. Over 125 years later, IRWIN is still the leading manufacturer of wood drilling bits and
More informationInstallation Instructions
Installation Instructions 1. Position the unit onto bridging packers. These keep the unit away from any water sitting inside the frame. 2. Centralise the unit within the frame and pack the edges with appropriate
More informationMilling Chuck Features
Milling Chuck Features Since its first introduction into the industry in 1963, Nikken has sold over 2,000,000 worldwide and never stopped improving its original design. Featuring multi-roller bearings
More informationA guide to getting started
ROUTING A guide to getting started BOOKLET A 32 page guide to setting up and using your router and cutters BOOK/SS3 IN A SERIES CONTENTS CONTENTS 1. HEALTH AND SAFETY.................. 1 2. ROUTING BASICS
More informationThese instructions will show you how to install an internal door into a non-loadbearing partition wall. The instructions are split into three parts.
No 8 in the series of 'How to' brochures produced by PlaceMakers, New Zealand How to Frame and Hang a Door These instructions will show you how to install an internal door into a non-loadbearing partition
More informationAZEK Rail Install Guide
TRIM MOULDING DECK PORCH RAIL PAVERS AZEK Rail Install Guide Installing AZEK Rail with CableRail by Feeney... 1 Installing CableRail by Feeney for AZEK Rail... 7 Installing AZEK Rail Stairs with CableRail
More informationRadianceRail Installation Guide
RadianceRail Installation Guide Installing RadianceRail with CableRail by Feeney... 2 Installing CableRail by Feeney for RadianceRail... 7 Installing RadianceRail Stairs with CableRail by Feeney... 10
More informationBAKA Protect Series 2000 / 4000. Protect. The adjustable hinge system for timber entrance doors
BAKA Protect Series 2000 / 4000 Protect BAKA Protect Series 2000 / 4000 The adjustable hinge system for timber entrance doors index 3D-Rendering, similar to ill. BAKA Protect 2D BAKA Protect 2010 2D two-dimensionally
More informationLift-off hinge. Rising hinge. Standard hinge. Heavy duty hinge. Parliament hinge. Spring hinge. Double action spring hinge. Concealed mortise hinge...
Door Hinges Contents Butt hinges Lift-off hinge Rising hinge Standard hinge Heavy duty hinge Parliament hinge Spring hinge Double action spring hinge Concealed hinges Concealed mortise hinge... Pivot
More informationRaised Panel Doors Made Simple With Freud s 2+2 Raised Panel Bit Set
Raised Panel Doors Made Simple With Freud s 2+2 Raised Panel Bit Set Congratulations on your purchase of Freud s world class 2 + 2 Raised Panel Bit Set. This revolutionary design combines two small wings
More informationDE Frame with C Series Sidelight
TOOLS REQUIRED Tape measure 6' magnetic level 3' magnetic level Screw gun with clutch adjusted #2 phillips tip #3 phillips tip Screwdriver (used to adjust frame on will using oval slots) Pry Bar Powder
More informationPlumbing. www.armeg.co.uk. The convenient, compact and clever solutions to your wrench and hand tool needs
INNOVATIVE DRILLING & TOOL SOLUTIONS www.armeg.co.uk Plumbing The convenient, compact and clever solutions to your wrench and hand tool needs Complete Heating Installation with PHI Wrench Set Easy Tap
More informationCONTROL EVOLUTION STANDARD COMPACT. Versatile in use. Perfect sawing and grooving with Striebig.
CONTROL EVOLUTION TANDARD COMPACT COMPOITE PANEL Versatile in use. Perfect sawing and grooving with triebig. Creating ustainable Values Confidence, ability, continuity We are committed to vertical panel
More informationKIRÁLY TRADING KFT H-1151 Budapest Mogyoród útja 12-14 tel: 061307-3801 Email_pzoli@kiralytrading.hu. Clamps Clamping devices
04000 Clamps Clamping devices 23000 22000 21000 20000 09000 08000 07000 06000 05000 04000 03000 02000 01000 297 04010 Adjustable straps Tempered steel 1.1191 Black oxide finish nlm 04010-101 Suitable thrust
More informationPRESENTATION ON REPAIR AND REHABILITATION OF BUILDINGS DAMAGED IN EARTHQUAKE. By H P Gupta & D K Gupta
PRESENTATION ON REPAIR AND REHABILITATION OF BUILDINGS DAMAGED IN EARTHQUAKE By H P Gupta & D K Gupta DIFFERENT TYPES OF DAMAGES 1.Minor cracks 0.5 to 5 mm wide in load or non-load bearing walls 2.Major
More informationPremier & Deluxe 3-Season Room Sliding Glass Door
DTSSGD-11 Premier & Deluxe 3-Season Room Sliding Glass Door Installation Instructions Screen Door Seal Left Side Track Top Track Assembly Right Side Track Right Side Trim Sliding Glass Door Sliding Screen
More informationTRIMMING UNIT/DIAMOND MACHINE TST.13
TRIMMING UNIT/DIAMOND MACHINE TST.13 REFERENCE BOOK rel. 02.15 TRIMMING UNIT/DIAMOND MACHINE TST.13 REL. 02.15 ENGLISH LANGUAGE 1 MACHINE DESCRIPTION TST.13 was designed and built for processing methacrylate.
More informationMachine Screws, Dowel Pins and Hardware
Machine Screws, Dowel Pins and Section Contents Plain Socket Head Screws...Page 13-2 Wire Locking Screws...Page 13-3 Captive Screws...Page 13- Ventilation Screws...Page 13- Shoulder Screws...Page 13-
More informationInForm Mobile Units. Selection. Equipment trolley, filing trolley Printer/PC trolley Overhead/demo trolley
Selection Equipment trolley, filing trolley Printer/PC trolley Overhead/demo trolley Basic mobile unit Basic mobile with vertical profiles Installation options Functional shelf, low Functional shelf, inclinable
More informationFixturing systems Fixturing systems for measurement technology
Fixturing systems Fixturing systems for measurement technology Innovations and new additions to range Sets Spannfix Eco complete set The set contains different supports, extension elements and stop units.
More informationDO NOT OPERATE LANCELOT OR SQUIRE WITHOUT FIRST ADJUSTING THE SAFETY GUARD. ( See Below)
Assembly Instructions - Lancelot and Squire King Arthur s Tools (KAT) is pleased to present the first tandem mounted saw chain accessories whereby differing combinations of Lancelot and Squire may be paired
More informationMERO Floor Systems - CleanRoom
MERO Floor Systems - CleanRoom Innovative solutions out of one hand Development Access floor Consulting Hollow floor Planning Floor covering and Manufacturing Installation Installation Services Floor systems
More informationRouter Table. Operating Procedures for
Operating Procedures for Router Table INTRODUCTION: The router table is a very versatile tool. It can be used to cut a molding profile, cut workpieces to match the shape of a pattern and cut a molding
More informationIntroduction to Door Construction
Entry Door Construction Made Simple with Freud s Entry & Interior Door Router Bit System Congratulations on your purchase of Freud s Entry & Interior Door Router Bit System. This unique set allows you
More informationSheet Metal Bending. By- Prem Mahendranathan
Sheet Metal Bending By- BENDING n Bending is a manufacturing process by which a metal can be deformed by plastically deforming the material and changing its shape n Deformation about one axis PROFILES
More informationRetail Reception kiosk
Retail Reception kiosk put 42" corner post in below 66" to allow post to extend above kiosk for raised box sign Mini cantilever option - 24" overhead support leg Mini cantilever option - 24" overhead 66/48E
More informationSliding and Folding Door Fittings Sliding Door Accessories
Sliding door lock Toplock For 1- and 2-leaf sliding doors Suitable for toughened safty glass and laminated sheet glass Suitable for DIN left and DIN right Max. weight per door leaf 120 kg For glass thickness:
More informationSizing and Edge Banding Machines Optimat KFL 525 and KFL 526
Sizing and Edge Banding Machines Optimat KFL 525 and KFL 526 Optimat profi line power line 2 Optimat KFL 526 3 The New Optimat Series: Unrivalled benefits 20% greater output coupled with 10% cost savings
More informationFasteners and screw threads
ISO Standards Handbook: Fasteners and screw threads Volume 2: Product standards Contents Part 3 : Product standards 2001, Ed. 5, 1094 p., ISBN 92-67-10345-8 3.1 External drive hexagon head bolts and screws
More informationButt Fusion Welding of HDPE Pipes Work Procedure
Butt Fusion Welding of HDPE Pipes Work Procedure A pipeline is as good as its weakest point. Accordingly it is not only important that quality pipes and components are used in a piping system, but also
More information172 Holesaws Overview Bosch Accessories for Power Tools 09/10. 189 Diamond holesaw. with Power-Change adapter. 190 Diamond drill bits
Holesaw 172 Holesaws Overview Bosch Accessories for Power Tools 09/10 Overview 178 Progressor holesaw 189 Diamond holesaw 196 Hole cutters 183 Sheet Metal holesaw 190 Diamond drill bits 186 Multi Construction
More informationInfinite possibilities.
Infinite possibilities. The Compact Module System CMS: Sawing, Routing, Sanding on 0.5 m. CMS module carrier The Compact Module System CMS Infinite possibilities. The system concept perfected further.
More informationBUILDINGA 1/10 SCALE FLATBED TRAILER
VOLUME 1, ISSUE 1 BUILDINGA 1/10 SCALE FLATBED TRAILER BUILT, DESIGNED & WRITTEN BY NATHAN MYERS MATERIALS: FEATURES: While the design was kept simple to allow anyone to be able to build their own trailer,
More information19 DYNAmax Free Standing Server C A B I N E T s
9 DYNAmax Free Standing Server C A B I N E T s 9 DYNAmax Free Standing Server Cabinets FAMILY W=mm and W=800mm DYNAmax Series Free Standing Server Cabinets DYNAmax series Servering Enclosures, provide
More informationHow to Build Your Own CornHole Game
How to Build Your Own CornHole Game DIMENSIONS Here is a diagram with the basic measurements for the Cornhole board game. SUPPLIES 1/2 thick sheet of plywood one 4 x4 or two 2 x4 s 8 long 2 4 s (4) 4 1/2
More information19 DYNAmax Free Standing Server C A B I N E T s
9 DYNAmax Free Standing Server C A B I N E T s 9 DYNAmax Free Standing Server Cabinets FAMILY W=600mm and W=800mm DYNAmax Series Free Standing Server Cabinets DYNAmax series Servering Enclosures, provide
More informationPITCHED ROOF STRUCTURES
PITCHED ROOF STRUCTURES for framed and frameless photovoltaic modules Needed tools and materials: cordless screwdriver 10mm and 13mm spanners 5mm Allen key bolts, screws and tools for fixing the system
More informationHORIZONTAL INSTALLATION
THERMO/SOLAR Žiar s.r.o. MANUAL FOR INSTALLATION PV SUPPORTING FRAMES HORIZONTAL INSTALLATION Technical alternation reserved A1410 1 12/2014 CONTENT ORD.NO. PAGE Mounting information 3 Mounting, flat roof
More informationOverview. Milling Machine Fundamentals. Safety. Shop Etiquette. Vehicle Projects Machine Shop
Overview Milling Machine Fundamentals Wayne Staats, UW-Madison FSAE Safety Shop Etiquette Before Machining Indicating Calculating Feeds and Speeds Machining Maintenance Safety Respect the machines Common
More informationOperating Instructions Drill rig DRU160
Operating Instructions Drill rig DRU160 Index 000 / 001 Original operating instructions 10988825 en / 20.10.2009 Congratulations! With a Hydrostress unit from TYROLIT you have chosen a tried and tested
More informationINSTRUCTIONS THOROUGHLY BEFORE BEGINNING***************
Bill of Materials: RAC0012 Green Wing Aerodynamic Skirt Kit Item Part Number Description Quantity 1 RMC0218 Gen 2 Trailer Skirt Roadside 1 2 RMC0219 Gen 2 Trailer Skirt Curbside 1 3 RMC0041 Trailer Skirt
More informationglass & Glazing Products
glass & Glazing Products WallMaker Create an unlimited variety of bright, beautiful and secure interior environments with the easy-to-install Stylmark WallMaker glass wall system. This versatile system
More informationEVEN FOR SMALL QUANTITIES WE GET STARTED RIGHT AWAY...
EVEN FOR SMALL QUANTITIES WE GET STARTED RIGHT AWAY... Because we produce in-house, so we don t have far to go. Our decisions are not based on when and who can do what in Asia; instead, we look at what
More informationLadder Shelf Plans Final dimensions: 25 L x 21 W x 72 H
Ladder Shelf Plans Final dimensions: 25 L x 21 W x 72 H Copyright 2011. MLCS Woodworking. Page 1 Router bits and supplies needed: 3/8 Rabbeting bit (#10691) 1 Bottom Cleaning bit (#7941) Top and Bottom
More informationINSTALLATION INSTRUCTIONS for Bifold Doors (JII103)
Thank you for selecting JELD-WEN products. Attached are JELD-WEN s recommended installation instructions for premium composite, hollow and solid core molded Bifold Doors. Bifolds are designed for fast
More informationPARTS FOR OTHER EMBROIDERY MACHINES
PARTS FOR OTHER EMBROIDERY MACHINES PARTS FOR SINGER 114K & 114W, TREASURE and other "FREE HAND" CHAINSTITCH EMBROIDERY MACHINES - 8056-2 Nipple #2-8056-3 Nipple #3-8056-4 Nipple #4-8056-5 Nipple #5-8056-6
More informationwww.cornholesupplies.com
www.cornholesupplies.com How To Build Regulation Cornhole Boards Home of the Original Cornhole Bags and Boards Supply List: 1-4' X 8' Piece of Plywood (pre sanded) 4-2" X 4" X 8' Studs (2 by 4s make sure
More informationDESIGN BY: ARCH. GIUSEPPE INZITARI
DESIGN BY: ARCH. GIUSEPPE INZITARI 218 FOR HIGH THICKNESS FROM 12 TO 17.5 MM - GIUMAX GIUMAX 9500 Page 220 GIUMAX 8500 Page 227 ROLLERS Page 233 GIUMAX 4500 Page 236 GIUMAX 6500 Page 244 FROM 8 TO 12 MM
More informationRemoving chips is a method for producing plastic threads of small diameters and high batches, which cause frequent failures of thread punches.
Plastic Threads Technical University of Gabrovo Yordanka Atanasova Threads in plastic products can be produced in three ways: a) by direct moulding with thread punch or die; b) by placing a threaded metal
More informationHive Top Ventilation Shims
Hive Top Ventilation Shims When preparing your bee hives for the winter, it is very important to provide for ventilation at the top of the hive. Through out the winter, the bees are expelling a lot of
More informationcomprehensive training factory technical support on-site trouble shooting custom tool design
comprehensive training Increased productivity equals lower cost, improved profitability, and ultimately, survival of your business in today s competitive environment. The LMT Onsrud Performance Team will
More informationWHI 90-Minute Rated Veneered Door Frame Installation Instructions
No. 940-03-10 INSTALLATION INSTRUCTIONS 90 MINUTE RATED VENEERED DOOR FRAME DOOR REQUIREMENTS: Consult the door manufacturer to make sure that the doors are qualified for the hardware to be installed,
More informationOPTICAL MEASURING MACHINES
OPTICAL MEASURIN MACHINES SYLVAC SCAN Dedicated to the fast and contactless measuring of cylindrical parts, our new SCAN machines are based on the principle of the scanner. This technique allows to reproduce
More informationKITCHENS. Tip PAGE 1 FITTING YOUR KITCHEN GUIDE. How to mark out a kitchen. Tools required for installing a kitchen STEP ONE STEP TWO STEP THREE
FITTING YOUR KITCHEN GUIDE How to mark out a kitchen PAGE 1 Before starting on the installation, measure 870mm from the lowest point of the floor and mark a datum line around the room to indicate where
More informationVariety of Control Options Control is possible via wall switches, remote control systems or integration into building management systems.
Breezway Altair Powerlouvre Window 35 Breezway Altair Powerlouvre Window The Powerlourve Window motor is neatly concealed within the Easyscreen TM Frame or the Component Powerlouvre Head Section. Automated
More informationDECKING INSTALLATION, CARE & MAINTENANCE INSTRUCTIONS. 866.729.2378 MOISTURESHIELD.COM limited lifetime warranty 866.729.2378 WWW.MOISTURESHIELD.
DECKING INSTALLATION, CARE & MAINTENANCE INSTRUCTIONS 866.729.2378 MOISTURESHIELD.COM limited lifetime warranty Welcome To The Even Greater Outdoors. Congratulations on choosing MoistureShield for your
More informationFor mechanical & hydraulic presses Inch & metric taps
www.danly.com TRUSTED SOLUTIONS AND INNOVATION Professional IDT TM In-Die Tapping Catalog For mechanical & hydraulic presses Inch & metric taps www.danly.com Professional IDT TM In-Die Tapping Service
More informationStreamer. Perfect Edging for your Products PRODUCTIVITY AND PRECISION
Edgebanders CNC Machining Centers Vertical Panel Saws Pressure Beam Saws Panel Handling Perfect Edging for your Products Streamer PRODUCTIVITY AND PRECISION Optimum Price/Performance Ratio with HOLZ-HER
More informationAZEK Rail Install Guide
TRIM MOULDING DECK PORCH RAIL PAVERS AZEK Rail Install Guide Installing AZEK Rail with Glass Infill... 2 Installing AZEk Rail Stairs with Glass Infill... 9 Notes...14 Please read all instructions completely
More informationMounting accessories TÖBB MINT VÁLASZTÉK
96 FOR ADHESIVE DISCS The adhesive discs with various dimension and shapes are easy to use for mounting. Because of their flexible types they are suitable for sanding of flat or curving surfaces. GRINDING
More informationHow to Build a Poker Table
How to Build a Poker Table www.pokertablematerials.com 10-Person Poker Table- 96 x 48 These are step by step instructions for building a poker table. The table will measure 48" x 96" and have a 4" wide
More informationC O N V E Y O R C O M P O N E N T S C H A I N S B E L T S B E A R I N G S
C O N V E Y O R C O M P O N E N T S C H A I N S B E L T S B E A R I N G S January 2009 Issue 6 Valu Guide Brackets The Ultimate in Adjustability and Cost Savings Valu Guide brackets are part of a family
More information413 NOVA SYSTEM PAN AMERICAN TOOL CORPORATION 5990 NW 33309-2208 PHONE (954)735-8665 TOLL FREE 1-800-423-2764 FAX
413 NOVA SYSTEM 5990 NW 31st Avenue Ft. Lauderdale, Florida 33309-2208 PHONE (954)735-8665 TOLL FREE 1-800-423-2764 FAX (954)735-8668 2013 Pan American Tool Corporation 2013 TERMS AND CONDITIONS TERMS:
More information758 Heavy-duty Ratchet Guy Wire Cutter
INSTRUCTION MANUAL 758 Heavy-duty Ratchet Guy Wire Cutter Read and understand all of the instructions and safety information in this manual before operating or servicing this tool. Register this product
More informationInstallation Instructions For Slider Casement Air Conditioners
Installation Instructions For Slider Casement Air Conditioners NOTE: These instructions describe installation in a typical wood framed window with a wood SLIDE-BY sash, or installation in a metal CASEMENT
More information3000, 4000, 4100, 7500, 7700
3000, 4000, 4100, 7500, 7700 Drum & Disc Brake Lathes s Identification READ these instructions before placing unit in service. KEEP these and other materials delivered with the unit in a binder near the
More informationOperating instructions for Electrode sharpening machine WIG 4
Operating instructions for Electrode sharpening machine WIG 4 Original Please keep for further use! Kaindl-Schleiftechnik REILING GmbH D-75203 Königsbach-Stein Remchinger Str. 4 Germany Tel.: +49 7232
More informationDriven Toolholders for SAUTER Turrets
Driven Toolholders for SAUTER Turrets Manufacturer of Precision Tools since 1974 INNOVATION PRECISION INDIVIDUALITY QUALITY SERVICE Table of Contents Type Page Driven Toolholders DIN 5482 - Disc-type Turrets
More informationTRUSTED SOLUTIONS AND INNOVATION CATALOG DIE SETS
www.danly.com TRUSTED SOLUTIONS AND INNOVATION CATALOG DIE SETS Quality & performance Quick delivery Precision Components www.danly.com CATALOG DIE SETS Service We Deliver and Quality You Can Depend On
More informationCedar Cottage Doghouse Plans
Overlapping cedar shingles add an element of charm to this medium size doghouse. The walls, floor, and trim are constructed of solid cedar, making it naturally weather resistant and provides excellent
More informationLunette 2 Series. Curved Fixed Frame Projection Screen. User s Guide
Lunette 2 Series Curved Fixed Frame Projection Screen User s Guide Important Safety and Warning Precautions Please follow these instructions carefully to ensure proper maintenance and safety with your
More informationComplete Dovetail Jig Instructions
Complete Dovetail Jig Instructions 18 15 1 12 13 8 (22818) 19 17 16 4 3 6 14 5 9 9 11 10 2 PARTS LIST - COMPLETE DOVETAIL JIG Introduction Your new dovetail jig will cut Full Through Dovetails and three
More informationNOT SEARCHING, BUT FINDING
NOT SEARCHING, BUT FINDING We carefully ensure that our wide and extensive range provides a good assortment so that you feel in good hands, even if you are looking for portable measurement devices to provide
More informationINSTRUCTIONS: LocknCharge Laptop Carts
INSTRUCTIONS: LocknCharge Laptop Carts www.lockncharge.com Extra Tools required: Hammer, Philips head screwdriver, medium adjustable spanner. (Allen key supplied) (Panel colours for illustration purposes
More informationRemovable Aluminium posts
Post Solent Sail Shades Ltd 120 Billington Gardens Hedge End Southampton SO30 2RT Tel/Fax: 01489 788243 www.solentsailshades.co.uk Email: info@solentsailshades.co.uk Removable Aluminium posts Single Pole
More informationECLIPSE THE ULTIMATE MULTI-PURPOSE SHELVING SYSTEM. UP TO 360kg SHELF CAPACITY QUICK & EASY BOLT-FREE ASSEMBLY STRONG, ROBUST & MODERN DESIGN DESIGN
ECLIPSE CHROME WIRE SHELVING ECLIPSE THE ULTIMATE MULTI-PURPOSE SHELVING SYSTEM UP TO 360kg SHELF CAPACITY QUICK & EASY BOLT-FREE ASSEMBLY STRONG, ROBUST & MODERN DESIGN A S S E M B LY Fully Adjustable
More informationMilling Milling milling cutter milling machines 1
Milling Milling is a basic machining process by which a surface is generated progressively by the removal of chips from a workpiece as it is fed to a rotating cutter in a direction perpendicular to the
More informationMechanical arms, belts and sheets
Car parks Mechanical arms, belts and sheets DETAIL ARM CAR PARK (mm) 5000 Platen 100x5mm Iron sheets 4mm 5000 485 2100 Belts type C 120x50x2 mm 4915 5400 Hot dipped galvanized UNE-EN ISO 1461 or black
More informationLathe Milling Attachment
Lathe Milling Attachment By L C. MASON BY CLEVERLY stacking cold-rolled flat stock together, T-slots and slide for this lathe milling attachment are made without costly machinery. In fact, only two tools,
More informationThe toughest demands do not compromise.
The toughest demands do not compromise. 06 Application overview 99 Machine overview 100 Routers 104 OF 1010, OF 1400, OF 2200 System overview and router accessories 110 Multi-routing templates 114 MFS
More informationHONING LATHE DUPLICATOR CUTTERS
Lay the flat face of the cutter or bit on the flat top surface of the hone with the rest of the cutter overhanging the edge. Rub the cutter or bit up and down the hone (Figure 24-44). Be sure to hold the
More informationPipe Cutting and Beveling Clamshells
Pipe Cutting and Beveling Clamshells Who We Are One Company, Total Support, Complete Solutions For more than a century, Hydratight has provided world-class bolted joint solutions and continues to set international
More informationInstalling Window and Door Mouldings
Installing Window and Door Mouldings About Window and Door Mouldings The trim around windows and doors greatly influences the look and style of your interior. They also bridge the gaps and cover spaces
More informationProcessing Centers. Vantage 13/15. Nest & More
Processing Centers Vantage 13/15 Nest & More Vantage 13 and Vantage 15 With their heavy-duty machine bed and highly rigid extension arms, the Vantage 13 and 15 processing centers offer the ideal basis
More informationSafe use of vertical spindle moulding machines
HSE information sheet Safe use of vertical spindle moulding machines Woodworking Information Sheet No 18 (Revised) Introduction This information sheet is one of a series prepared by HSE's Woodworking National
More informationCutting and Shearing die design Cutting die design
Manufacturing Processes 2 Dr. Alaa Hasan Ali Cutting and Shearing die design Cutting die design A stamping die is a special, one-of-a-kind precision tool that cuts and forms sheet metal into a desired
More informationEasy honeycomb processing. The comprehensive tooling range for machining honeycomb panels
Easy honeycomb processing The comprehensive tooling range for machining honeycomb panels Honeycomb panel suitable tools for each working step Ein System, viele Varianten. A requirement for todays wood
More informationSheet Metal Shearing & Bending
Training Objective After watching the program and reviewing this printed material, the viewer will gain a knowledge and understanding of the principles and machine methods of shearing and bending sheetmetal
More informationCommon Mechanical Engineering Terms
Common Mechanical Engineering Terms Ball and Detent (n) A simple mechanical arrangement used to hold a moving part in a temporarily fixed position relative to another part. The ball slides within a bored
More information