TAP ( THAI - ASIA P.E. PIPE )

Transcription

1 TAP ( THAI - ASIA P.E. PIPE ) TAP has established since 1984 and commenced producing high density polyethylene pipe (HDPE) ranging from dia mm. for potable water, waste water, drainage and underground cable conduits, polypopylene pipe ( PP ) ranging from dia mm. for hot water application and dia mm. for chemical industries and sewage systems, and low density polyethylene ( LDPE ) pipe ranging from dia mm. for irrigation systems and variety of injection molded fitting to suit many applications, and also prefabricated fittings to complement or jointing with steel pipe & flanges PRODUCTION FACILITIES Our factory is located approximately 20 km from center of Bangkok on Suksawad Rd, Phrapradaeng district. The products are manufactured in our modern plant of 8,000 sq. metre on the total area of 14 rai of and or 22,400 sq.metre with more than 300 employees. We have the production capacity up to 20,000 tons per annum by the year of 1997 and we are able to manufacture HDPE pipe up to 1,600 mm. in which it's considerable the first largest HDPE pipe ever manufactured in Asia. In order to meet the needs of rapidly growth economy and improving infrastructure of Thailand and neighborhood countries. T.A.P. COMMITMENT Our aims are not to be the largest plastic pipes manufacture but, to be the leader in quality plastic pipes maker complete with various types of fittings for different needs and applications. In which, our quality control department has been equipped with latest testing equipments, instruments as well as fully trained engineers to be able to assure the quality of the materials prior to processing and finished products. In 1995, Thai-Asia P.E. Pipe was also the only first plastics pipe manufacturer to introduce colour stripes/colour code on different applications in order to meet customer requirements not just pressure or non pressure pipes but also the underground electrical conduits and subducts of optic fiber as well. PP HDPE LDPE CONDUIT FITTINGS & ACCESSORIES

2 The Polypropylene Pipes (PP) The Polypropylene Pipes (PP) The Polypropylene pipes ( PP ). They are produced from engineering plastic material that give a good physical and chemical properties for pipes and most suitable and best performance for water supply, hot water and for industrial usage conveying a chemicals. TAP's PP pipes are produced according to DIN 8077 / 78 and a fully comprehensive system with ranging diameter available from 20 mm. to 1,000 mm. with the standard length of 6 and 12 M A strong connection and homogeneous material The welding process by high temperature produces a secure bond. The assembly and welding joint of pipe is solid and even. It takes a moment to complete once cool its ready for instant full efficiency operation. Advantageous installation techniques The pipe is light weight, flexible and easy to transport and assemble. That can be cut and welded as size required. The welding tools are compact with the efficiency easy to use. TAP's PP pipes are the most suitable and giving the best performance for multi purpose pipe systems No problems of extra post installation cost. No rust of corrosion. Homes uasge for water and hot water. Industrial usage conveying hot water or chemicals.

3 HDPE HDPE Pipes System The High Density Polyethylene Pipes ( HDPE ) or commercial name called P.E. pipes. They are produced from a semi engineering plastic material according to ISO/TR 9080, ASTM-D 1248 that give a good physical and chemical properties for the pipes and it is the most suitable and giving the best performance for high and low pressure pipe system. The P.E. pipes are conforming to various standards ISO/R 161, DIN 8074/75, SFS 4231/32, CEN/TC 155, AS 4130 and TIS etc. TAP can produce P.E. pipes ranging from small diameter 16 mm up to the largest diameter 1600 mm at standard length of 6 m and 12 m, but for a small dia mm (1/2-4 inch.) can be coiled up to 500 m. However it is very much depend on transportation suitability. Versatility P.E. pipe has superior properties so it could be used in a large number of applications; the low pressure pipe for irrigation system, the high pressure pipe up to 20 bar at 27? C for water, including some chemicals, gas and sluice pipe's system, underground cable conduits and it could be jointed with other pipe's systems. Light Weight The weight of P.E. pipe is only 1/5 of a steel pipe and 2/3 of a P.V.C. pipe of similar sizes. So, it can be coiled of 100 meters or more. This leads to significant savings in the cost of handling and transportation. Which is also need less time for installation. Flexibility P.E. pipe is produced from a good strength and flexible characteristics material. It can be bent and installed to most terrain contours without any support. P.E. pipe system has less problem designed to accommodate soil movement. Bending radius of P.E. pipe is times of pipe diameter. Chemical Resistance P.E. pipe has a good resistance to most common organic and inorganic chemical, solvent, or sea water. It will never suffer from rust or corrode which means it has minimum maintenance than any other pipe system. Black deteriorate P.E. pipe has carbon black for resistance to sun light and ultraviolet ray attack.

4 Superior Flowability P.E. pipe has an extremely smooth inner surface with roughness coefficients n = (Manning theory) and c = 150 (Hazen and Williams). which causes the lowest flow friction of any liquid and give the excellent flow properties throughout the service life lowest at operating cost when comparing to the other pipes with similar diameter. Impact Resistance P.E. pipe is produced from very high flexural and good impact strength material. It will not crack or break and fracture under effect of rough handling. It can withstand heavy loads for underground lining.

5 LDPE LDPE Pipe LDPE pipe is produced from a semi engineering Plastic Material that give a good physical and chemical properties for low pressure pipe that is suitable for Agricultural Water Supply. The standard pipe is produced according to DIN 8072/73. Advantages for agricultural purposes The pipe is suitable for drip, springler system including for landscape. Versatibility LDPE pipe of TAP is produced ranging from mm. It can be coiled and ease for transportation including fittings (Grip lock system) that easily connect to the pipe. The threaded fitting of LDPE pipe could be joined with the other pipes system and accessaries. The Standard pipe can be coiled 200 metres per roll the special order can be made. It depends on sizes and ease of transportation. Surrounding Resistance LDPE pipe can stand to UV light and resistance to Chemical (Acid & Base). Superior flowability The pipe has smooth inner surface with roughness coefficients n=0.009 (Manning) and C=150 (Hazen and Williams) which causes the lowest flow friction of any liquid and give the excellent flow properties, when comparing to the other pipes with similar diameter.

6 CONDUIT HDPE Conduit Pipe System The High Density Polyethylene Pipes (HDPE) are produced from an engineering plastic material that give a good physical and chemical properties for pipes and a pipe material have good electrical properties that the pipe can be used for conduit application. A good quality polyethylene materials in highest level of cleanliness are concerned in cable industry for produced an insulation and sheathing of thinnest telecommunication cable and thickest power cable, and from low tension right up to voltages as high as 500 KV. HDPE conduit pipe can be produced more than 100m. / coil by special order. However it very much depend on transportation suitability. Distinctiveness of TAP HDPE Cable Conduit 1. An orange color stripes on outer surface of pipe, it 's best appearance for conduit pipe application, identified safety maintenance. 2. HDPE conduit pipe ranging from diameter 32 mm. up to 160 mm. have got standard lenght of 6 m. and 12 m. or from diameter mm. can be coiled up to 50 and 100 m./coil. It 's light weight, ease of handling, less joints and save time for installation. 3. A pipe material has good resistance insulation characteristic, it is proved for safety and prevent any leakage of voltage. 4. HDPE conduit pipe has a good resistance to acid-base of soil condition. It will never suffer from rust or corrode that give a long lasting service life for under ground conduit pipe application. 5. HDPE conduit pipe also has a good impact resistance and can withstand heavy load for under ground lining. It has a high flexural that will not crack or break and fracture, safe against earthquakes, ground subsidence, ect. 6. HDPE conduit pipe has smooth inner surface and low friction resistance. It 's easy to pull and does not make damage for cable. Application For, Low voltages and High voltages cable conduit pipe, Telecommunication and other type cable conduit pipe, Suitable for underground and submerge cable conduit pipe lining.

7 FITTINGS & ACCESSORIES Besides, HDPE pipe, Our ancillary products for pipe system, fittings that can be used to the utmost efficiency with pipe. The continual development of our products for multi purposes. We produce fittings as our ancillary products. Fittings for high density polyethylene pipe Elbow 30 Elbow 45 Elbow 60 Elbow 90 Tee Stub-end Fittings for low density polyethylene pipe Grip Lock Fittings for HDPE conduit pipe Bends 90 Coupling Type A Coupling Type B Grip Lock

8 Fittings for polypropylene pipe Socket Fusion Other kinds of fittings Backing ring Rubber seal Screw set (bolt, nut and washer) Thread fittings