Edge Paint Color Chart

Transcription

1 Edge Paint Color Chart Campbell-Randall Machinery Co. 401 Irvine St. Yoakum TX USA Tel: (US only) or Fax:

2 AR 6350/6400 series The premium Italian edge paint ideal for finishing the cut edges of leather bags, belts, straps, shoe uppers, and saddlery. Provides superior coverage and excellent finish without the need for hand buffing or a clear coat. Special formula of natural and synthetic polymers provides a durable and flexible finish. Water based for easy clean up. Non-Flammable - Non-Toxic Apply by hand or with machines Drys to the touch in minutes - fully sets in 48 hours. Dry times can be accelerated with limited heat, which can also increase resistance to water. Sold in convenient 1 liter plastic bottles Available in 194 colors! Apply first coat and let dry. Burnish with soft leather wheel or hot glaze. Apply second coat on the smoothed surface for a uniform and sealed finish. Repeat as needed. Available Finishes: AR6350 = Glossy Finish: Medium high viscosity and elevated degree of shine. Resists dripping and provides excellent adhesion and high flexibility with wet-dry abrasion resistance. Designed for absorbent leathers. AR6350P = Glossy PLUS Finish: High gloss finish, with a smooth, well sealed edge. High viscosity and drip resistance. Excellent adhesion and high flexibility with wet-dry abrasion resistance. Excellent cold-flex resistance. Designed for very absorbent leathers. Requires fewer applications on normal leathers. AR6400 = Matt Finish: Medium high viscosity with a pleasant matt finish. Resists dripping and provides excellent adhesion and high flexibility with wet-dry abrasion resistance. Designed for absorbent leathers. AR6400P = Matt PLUS Finish: High viscosity for absorbent leathers and difficult to paint leathers. Requires fewer applications on normal leathers. Standard Stock Colors Normally stocked in both glossy & matte finish No minimum 301 White AR 6451/T AR 6460/T Beige AR 6460/T 1095 AR 6460/T Yellow AR 6455/T AR 6467/T 304 Red AR 6471/T AR 6472/T 305 Bordeaux AR 6458/T AR 6477/T 306 Dark Bordeaux AR 6460/T 710 AR 6460/T Green AR 6453/T AR 6476/T 308 Navy AR 6485/T AR 6499/T 309 Chestnut 310 Hazel 311 Light Brown 312 Med. Brown 313 Red-Brown 314 Dark Brown 315 Ebony 316 Black Limited Stock Special Order Colors No minimum if in stock AR 6460/T 1204 AR 6460/T 543 AR 6460/T 564 AR 6460/T 1216 AR 6460/T 591 AR 6460/T AR 6460/T 595 AR 6460/T 597 AR 6460/T 1223 AR 6460/T 623 AR 6460/T 1228 AR 6460/T 661 Edge Paint

3 AR 6350/6400 series Special Order Colors Some of these colors may be in stock per special request with limited availability. There is a 15 liter minimum for all non-stock special order colors AR 6460/T 501 AR 6460/T 513 AR 6460/T 525 AR 6460/T AR 6460/T 502 AR 6460/T 514 AR 6460/T 1201 AR 6460/T AR 6460/T 503 AR 6460/T 452 AR 6460/T 1202 AR 6460/T AR 6460/T 937 AR 6460/T 516 AR 6460/T 528 AR 6460/T AR 6460/T 505 AR 6460/T 1200 AR 6460/T 529 AR 6460/T AR 6460/T 506 AR 6460/T 518 AR 6460/T 463 AR 6460/T AR 6460/T 507 AR 6460/T 1107 AR 6460/T 531 AR 6460/T AR 6460/T 759 AR 6460/T 892 AR 6460/T 532 AR 6460/T AR 6460/T 509 AR 6460/T 521 AR 6460/T 3023 AR 6460/T AR 6460/T 343 AR 6460/T 522 AR 6460/T 534 AR 6460/T AR 6460/T 157 AR 6460/T 523 AR 6460/T 535 AR 6460/T AR 6460/T 1063 AR 6460/T 524 AR 6460/T 1203 AR 6460/T Special Order Colors

4 AR 6350/6400 series Special Order Colors AR 6460/T 549 AR 6460/T 562 AR 6460/T 1214 AR 6460/T 588 AR 6460/T 601 AR 6460/T AR 6460/T 1205 AR 6460/T 563 AR 6460/T 1215 AR 6460/T 1221 AR 6460/T 1222 AR 6460/T AR 6460/T 1206 AR 6460/T 564 AR 6460/T 577 AR 6460/T 1114 AR 6460/T 603 AR 6460/T AR 6460/T 552 AR 6460/T 1208 AR 6460/T 1216 AR 6460/T 591 AR 6460/T 357 AR 6460/T AR 6460/T 422 AR 6460/T 1209 AR 6460/T 579 AR 6460/T 592 AR 6460/T 1007 AR 6460/T AR 6460/T 554 AR 6460/T 473 AR 6460/T 1217 AR 6460/T 593 AR 6460/T 606 AR 6460/T AR 6460/T 555 AR 6460/T 1210 AR 6460/T 1218 AR 6460/T 594 AR 6460/T 1223 AR 6460/T AR 6460/T 556 AR 6460/T 1211 AR 6460/T 1219 AR 6460/T 595 AR 6460/T 608 AR 6460/T AR 6460/T 347 AR 6460/T 788 AR 6460/T 1220 AR 6460/T 596 AR 6460/T 943 AR 6460/T AR 6460/T 119 AR 6460/T 1094 AR 6460/T 584 AR 6460/T 597 AR 6460/T 63 AR 6460/T AR 6460/T 1207 AR 6460/T 1212 AR 6460/T 585 AR 6460/T 598 AR 6460/T 611 AR 6460/T AR 6460/T 560 AR 6460/T 23 AR 6460/T 586 AR 6460/T 599 AR 6460/T 233 AR 6460/T AR 6460/T 561 AR 6460/T 1213 AR 6460/T 587 AR 6460/T 600 AR 6460/T 137 AR 6460/T 626 Special Order Colors

5 AR 6350/6400 series Special Order Colors AR 6460/T 1175 AR 6460/T 640 AR 6460/T 1232 AR 6460/T AR 6460/T 1227 AR 6460/T 641 AR 6460/T 654 AR 6460/T AR 6460/T 629 AR 6460/T 1231 AR 6460/T 655 AR 6460/T AR 6460/T 1228 AR 6460/T 643 AR 6460/T 1233 AR 6460/T AR 6460/T 631 AR 6460/T 3040 AR 6460/T 657 AR 6460/T AR 6460/T 1229 AR 6460/T 645 AR 6460/T 658 AR 6460/T AR 6460/T 1230 AR 6460/T 646 AR 6460/T 659 AR 6460/T AR 6460/T 634 AR 6460/T 647 AR 6460/T 660 AR 6460/T AR 6460/T 635 AR 6460/T 648 AR 6460/T 661 AR 6460/T AR 6460/T 636 AR 6460/T 649 AR 6460/T 662 AR 6460/T AR 6460/T 637 AR 6460/T 650 AR 6460/T 663 AR 6460/T AR 6460/T 638 AR 6460/T 651 AR 6460/T 1234 AR 6460/T AR 6460/T 639 AR 6460/T 652 AR 6460/T 967 AR 6460/T Special Order Colors

6 FINISHES UW series Clear Finish AR 6250 Clear Edge Primer Creates a clear, extremely tough and flexibly finish on leather edges. An excellent primer for better adhesion. Works wonderfully with stained leather as well as unstained leather. Water based for easy clean up. Non-Flammable - Non-Toxic Apply by hand or with machines UW/8 series Clear Glossy Finish Durable, high gloss top finish Does not need to be buffed to produce a high gloss. Thanks to the elevated adhesive and penetrating power, UW 13/8 is also used as an adhesion promoter. Applied before the edge paint application to improve adhesion. This use is suggested on tight grain and slightly absorbent leathers. Can be applied as a final coat to matt finish paint to create a glossy top coat UW/9 series Clear Matt Finish Durable, smooth matt top finish. Can be applied as a final coat to glossy finish paint to create a matt top coat Apply first coat of edge paint and buff smooth Apply a coat of bright fixing agent UW 13/8 and let dry Apply a second coat of edge paint and let dry. For best results, apply the finish within two hours of application of the edge paint. Allow 48 hours to completely set. Creates a clear, extremely tough and flexibly finish on leather edges. An excellent primer for better adhesion. Works with stained leather as well as unstained leather. Water based for easy clean up. Non-Flammable - Non-Toxic Apply by hand or with machines AR 6350 Clear Glossy Top Coat Creates a clear, glossy, extremely tough and flexibly finish on leather edges. BT 639 Moss-Back Finish Specifically formulated to finish flesh side suede Creates a smooth, medium soft and flexible finish. Water based for easy clean up. Apply by hand or with machines Primers & Finishes

7 DC 3800 Abrasive Wax Soft abrasive wax, ideal for vegetable or mixed tanned leather. Excellent sealing power For the ageing and darkening effects on shoe uppers and leather goods The increased abrasive power aids brushing and burnishing effects. Useful for the brushing on heels and leather soles. 1 kg block (2.2 lbs) Lightly buff using a cotton brush with a little DC 3800 series abrasive wax. Use a clean cotton brush to remove wax residues. Colors: DC 3800 NEUTRAL DC 3809 DARK BROWN DC 3819 BLACK DC 3700 Carnauba Wax High polish protective coating. Excellent sealing power. NEUTRAL 1 kg block (2.2 lbs) Lightly buff using a cotton brush Beeswax 1 oz block EDGE Burnishing Wax Formulated for burnishing the edges of veg-tanned leathers. Colors: 80STIK2120: NEUTRAL 80STIK2121: BLACK 80STIK2122: BROWN YANKEE Polish Wax Stick polish used to burnish or polish shoes without paint or dye. 100g (3.5 oz) Colors: LAN-YWBK : BLACK LAN-YWBR : BROWN LAN-YWDB : DARK BROWN LAN-YWNT : NEUTRAL Waxes

8 DC 4000 series Wax-Based, Brushable Shoe Creams DC 4000/OP Satin Finish Very soft, brushable and penetrating shoe cream made from quality natural and synthetic wax emulsions. Creates a soft, natural satin finish. Satin Finish Soft, natural touch Easy application Available in a variety of colors Can be used in a one or two coats. Can be used on any type of full grain or corrected grain leather that has good absorption. Apply with a natural sponge, in the desired color tone and let dry for a few minutes Once dry, lightly buff using a cotton brush with a little DC 3800 series abrasive wax. (A clean cotton brush is recommended to remove the wax residues). Apply another coat of DC 4000/OP as the final coat. Finish by brushing lightly with a soft cotton brush. Optional Applications: Using a cotton brush or cloth to apply the DC 3800 soft abrasive wax to seal leather treated with the DC 4000/OP. DC 4000/** Neutral DC 4024/** Sand DC 4025/** Light Brown DC 4029/** Med. Brown DC 4007/** Dark Brown DC 4017/** Bordeaux DC 4013/** Navy Blue DC 4019/** Black DC 4000/S1 Glossy Finish Glossy, brushable waterbased shoe cremes made from quality natural and synthetic wax emulsions. Good gloss with a soft touch, excellent sealing power and natural transparency. Glossy Finish Soft and silky touch Easy application Can be used on any type of full grain or corrected grain leather that has a good degree of absorption. Available in a variety of colors Can be used in a single coat or as a second coat. Apply the glossy cream of the DC 4000/S1 VICTORIA CREME series by natural sponge, in the desired color tone, then let dry for a few minutes Lightly buff using a cotton brush with a little DC 3800 series abrasive wax. Optional Applications: Ideally used as the second coat after application of the soft DC 4000/54 series of creams. Use a cotton brush or cloth to apply the DC 3800 abrasive wax to seal leather treated with the DC 4000/S1 series cream. To increase the brightness of the leather, polish with a woollen brush and the DC 3700 carnauba wax for a higher degree of transparency and shine. Check the finish of the shoes at least 24 hours after application Shoe Creams

9 DC 4000 series Wax-Based, Brushable VAL series Shoe Creams DC 4000/W High Gloss Finish High gloss, brushable cream with a soft and silky touch. Very good sealing effect and natural transparency. High Gloss Finish Soft and silky touch Easy application Available in a variety of colors Suggested as a second coat application. Use a natural or synthetic sponge on any kind of finished leather. Once dry, brush with a cotton or military cloth for uniformity and best coverage. A final polishing with a woollen brush and the DC 3700 carnauba wax enables a high degree of transparency and brightness with a very pleasant feel. The ideal speed for the brushing operations is at about rpm. Optional Applications: Using a cotton brush apply the DC 3800 abrasive wax to seal leather treated with the DC 4000/W. A soft, brushable cream for footwear with a pleasant soft and clingy touch obtained from natural and synthetic waxes emulsified in water. Their special formulation grants an easy, safe and quick application. Apply by sponge on any type of finished leather and crust. Extremely soft and naturally bright Easy application Particularly suitable for ironing Apply the VAL series soft cream with a natural sponge in the desired color tone, then let dry for a few minutes. Lightly brush with a cotton brush and a small amount of DC 3800 series abrasive wax. Finish with a clean cotton brush to eliminate all the wax residues. Optional Applications: Using a cotton brush apply the DC 3800 abrasive wax to seal leather treated with the VAL cream. Apply VAL cream as a first coat and then finish with the of the DC 4000/W series creams The application of VAL creams in one or two coats is also highly recommended to achieve a soft and clingy touch Finish VAL cream with DC 3700 carnauba wax using a wool brush Shoe Creams