ABB Automation products 2

Transcription

1

2 ABB Automation products 2

3 Status LED Display CPU Operation and onboard I/O status Run / Stop Switch Control CPU operation Ethernet CPU (In selected models) With RJ45 Port COM1 Online access, Modbus RTU master/slave, CS31-Bus master, ACSII Integrated onboard I/O Convenient cost effective solution ABB Automation products 3

4 ABB Automation products 4

5 ABB Automation products 5 Click on Documentation Opens new window Choose AC500+ CoDeSys

6 Select open Select Index Type PM564-T-ETH and press ENTER ABB Automation products 6

7 Menu Bar Tool Bar Workspace Object Organizer Message Window ABB Automation products 7

8 ABB Automation products 8

9 ABB Automation products 9

10 ABB Automation products 10

11 ABB Automation products 11

12 By default ABB Automation products 12

13 If Internet access is existing CBP shows by default ABB homepage ABB Automation products 13

14 1 Choose the type of CPU 2 Select where do you want to store the project 3 Select OK to start. 2 The IO tab will be open on your right window with 2 child tabs. The 1 st tab is IO configuration, Click on the 2 nd tab for IO Mapping 1 To create IO variable for the CPU, go to expand OBIO and then double click on the IO (Onboard IOs) selection ABB Automation products 14

15 Click on I/O mapping tab Click to expand. Click to expand. Double click on the cell and give the name of the IOs as shown. Double click on the cell and give the name of the IOs as shown. ABB Automation products 15

16 ABB Automation products 16

17 ABB Automation products 17

18 2. Click on the BOX icon 1. Click this field ABB Automation products 18

19 Select???, and press F2, the Input assistant window below will appear ABB Automation products 19

20 Right click here and select Assign ABB Automation products 20

21 ABB Automation products 21

22 ABB Automation products 22

23 ABB Automation products 23

24 ABB Automation products 24

25 - - ABB Automation products 25

26 4 Key in your desired IP address and subnet mask then click OK 1 Select Local Area Connection 2 3 Select Internet Protocol Version 4 (TCP/IPv4) Choose Properties ABB Automation products 26

27 2 Activate Force IP settings 1 3 Enter now the new IP address, subnet mask and standard gateway here ABB Automation products 27

28 Choose Online Select Communication Parameters Select Gateway Choose Local ABB Automation products 28

29 Define a name for the connection Select New Select driver TCP/IP then click OK Enter the new parameters: IP address: xx.xx.xx.xx Port: 1201 Motorola byte order: Yes Then press ENTER and OK ABB Automation products 29

30 2 Click on Control Panel 1 Click on Windows Start Button ABB Automation products 30

31 Select Online ABB Automation products 31

32 Choose Communication Parameters Select Gateway Choose Local Define a name for the connection Click New Select driver Serial then click OK ABB Automation products 32

33 Enter the new parameters: Port: COM number in PC Baudrate: Parity: No Stop bits: 1 Motorola byte order: Yes Flow Control: Off Then press ENTER and OK Select Online ABB Automation products 33

34 ABB Automation products 34

35 Double click on the FALSE state, you will see a blue indication of TRUE on the right. This information indicates that you want to set the value to TRUE. ABB Automation products 35

36 ABB Automation products 36

37 ABB Automation products 37

38 ABB Automation products 38

39 Click Visualization ABB Automation products 39

40 Click icon ABB Automation products 40

41 To put the variable, put your cursor in the blank and press F2 ABB Automation products 41

42 Similarly, press F2 to bring up the Input Assistant ABB Automation products 42

43 Click icon To bring up the Input Assistant, put your cursor in the blank and press F2, then choose the desired variables from the list. ABB Automation products 43

44 ABB Automation products 44

45 ABB Automation products 45

46 Type here ABB Automation products 46

47 1 Click on Project 2 Click on Options 5 Click OK 3 Click on Desktop 4 Select the preferred language ABB Automation products 47

48 ABB Automation products 48

49 ABB Automation products 49

50 Right click on AC500 and select Create Config ABB Automation products 50

51 Click icon Click icon ABB Automation products 51

52 Uncheck this box to view the different function blocks in alphabetical order. ABB Automation products 52

53 Click icon ABB Automation products 53

54 Click icon ABB Automation products 54

55 Set Coil Reset Coil Parallel Contact ABB Automation products 55

56 ABB Automation products 56

57 3 Click on Diagshow all 2 Click on PLC Browser 1 Click on Resource Tab ABB Automation products 57

58 ABB Automation products 58

59 ABB Automation products 59

60 Note: ABB Automation products 60