Spokane Hardware Supply, Inc.
|
|
- Augustine Allison
- 7 years ago
- Views:
Transcription
1 Drawer Slides Window Hardware Sliding Hardware Builders Hardware Hand Tools NYLON BALL BEARING SHEAVE NYLON ROUND GROOVE SHEAVE WROUGHT STEEL TRACK Frame: 7/16" x 1-7/8". Roller: 5/16" wide x 5/8" diam. Plain finish steel. For use with KV track (below). For use with all KV track. For doors to 1-1/8" thick. Nylon round groove wheel. Frame: 2-15/16" x 1/2". Case: 1-1/4" x 5/16". For use with KV track (below). Length: 12'. Size: 5/16"H x 21/32"W. 1/2" nails included. Plain finish wrought steel. 402 STL NYLON STL 1 DOUBLE TRACK Length: 12'. Size: 1/4"H x 1"W. 1/2" x #5 FH wood screws included. Zinc plated steel. 469ZC 1 FIBRE TRACK For 1/4" or 3/4" sliding doors. 1/8" x 1/2" x 72"L NYLON GUIDE Easily installed. 1-3/8"L x 3/8"W NYLON 50 PLASTIC TRACK FOR SLIDING DOORS Matching guide & track ready for use. SIZE DOOR THICKNESS COLOR P2413T48 48" 1/8" TAN P2413T72 72" 1/8" TAN P2417T48 48" 1/4" TAN P2417T60 60" 1/4" TAN P2417T72 72" 1/4" TAN P2417W48 48" 1/4" WALNUT P2419T48 48" 3/4" TAN P2419T72 72" 3/4" TAN P2421T48 48" 1/2" TAN P2421T60 60" 1/2" TAN Toll-Free Phone: Local Phone: Toll-Free Fax: Local Fax:
2 Cabinet Hardware Furniture Components Sliding Door Hardware Cabinet Organizers Commercial Hardware ROLL-EZY BALL BEARING TRACK & S - FOR 1/4" GLASS P992 - COMPLETE TRACK Ideal for larger sliding glass door installations, can be easily cut down to fit opening. Each contains a complete set of hardware for 1 pair of doors: 1ea. #993 channel, 2ea. #995 shoe, 2ea. #997 carrier, 1ea. #999 lower track. Cut glass 1-1/4" shorter than height of opening. INDIVIDUAL S 993ZC - Upper channel for top & and ends of opening. Wide divider maintains door position. 15/16" wide x 5/8" high. 995ZC - Shoe for 1/4" glass - scant or full. Lightly curved bottom for free rolling position on ball bearings. 7/16" high. 997ZC - Ball bearing carrier has free rolling balls on 3" centers. Two point suspension between shoe & lower track. 999ZC - Lower track; balls ride freely on curved anvil with no contact against sides of lower track. 1" wide x 1" high. UPPER CHANNEL GUIDE GLASS DOOR SHOE BALL BEARING CARRIER LOWER TRACK SIZE FINISH P " ZINC 1 P " ZINC 1 P " ZINC 1 993ZC 12' UPPER CHANNEL 1 995ZC 12' GLASS DOOR SHOE 1 997ZC 12' BALL BEARING CARRIER 1 999ZC 12' LOWER TRACK 1 ROLL-EZY ALUMINUM GLASS TRACK S - UPPER T GUIDE VINYL GUIDE DOUBLE CHANNEL NYLON ROLLER PRESS 85 VINYL - Fits over top of glass for noiseless operation in upper channel. 7/8" long. 87 RUB - Installs in jams to cushion glass Double channel for tops, bottoms, & ends. 1-3/16" wide x 9/16" high x 144" length Shoe for 1/4" glass. Rollers to be inserted in bottom. 1" high x 144" length. 97 NYLON - Nylon roller press fits into bottom of 95 shoe Double track. 1-1/16" wide x 1/4" high x 144" length. Note: cut glass 1-3/16" lower than opening. DESCRIPTION 85 VINYL VINYL GUIDE 0 RUBBER BUMPER DOOR SHOE DOUBLE TRACK 87 RUB RUBBER BUMPER ' DOUBLE CHANNEL ' DOOR SHOE 1 97 NYLON ROLLER PRESS ' DOUBLE TRACK Visit us online at Call us Toll-Free: or Local:
3 Drawer Slides Window Hardware Rolling Door Hardware Builders Hardware Hand Tools BF30 BI-FOLD DOOR HARDWARE - PACKAGED S - 30LB. Track Sets Include: Track, top roller guide, bottom pivot, jamb bracket, hinge, snugger, knob & aligner. For 1" to 1-3/8" thick panels weighing up to 30 lbs. each. Provides full 1-3/8" vertical adjustment. Spring loaded top pivot & roller guide for easy installation. BF50-HDW: Hardware Only, Set Includes: pivot bracket, jamb bracket, top pivot, bottom pivot, snugger accordion, wrench, screws & instructions BP60 BYPASS S & ACCESSORIES OPENING SIZE BP60 BYPASS DOOR HARDWARE - COMPLETE PACKAGED S - 60LB. For installation of 2 bypassing doors with 3/4" or 1-3/8" thick panels up to 60 lbs. each. 5/16" vertical adjustment with screwdriver. Doors lift on & off track without loosening hanger screws. 1-1/4" headroom required between top of door & header. Set contents Track: 1-1/16" high x 2-1/16" wide. Hangers for 2 doors per set: installed with 2 screws. Floor guide: adjustable for 3/4" to 1-3/8" thick. Finger pulls: 3/4" diameter, brasstone finish. OPENING " " " " 6 DOOR WIDTH ' (TWO) 17-3/4" ' (FOUR) 11-3/4" ' (FOUR) 14-3/4" ' (FOUR) 17-3/4" 6 BF50-HDW BI-FOLD HARDWARE PACK Hanger Adjustable Floor Guide SIZE BP BP SINGLE WHEEL HANGER 1/4" OFF 50 PAIR SINGLE WHEEL HANGER 1/2" OFF 50 PAIR BP ADJ. FLOOR GUIDE 3/4" TO 1-3/8" 50 NON-MORTISE BI-FOLD DOOR HINGE Overall Height: 3" Pin Diameter: 1/4" Leaf Width: 7/8" & 5/8" For use on bi-fold doors. Made of wrought steel. 2 per card with screws. SIZE FINISH " US4 SATIN BR. CD NON-MORTISE BI-FOLD DOOR HINGE Overall Height: 3-1/2" Pin Diameter: 1/4" Leaf Width: 1" NOTE: Only nickel hinges include mounting screws. SIZE FINISH PKG H /2" NICKEL 1 H R4 3-1/2" ANTIQUE BRONZE 1 Toll-Free Phone: Local Phone: Toll-Free Fax: Local Fax:
4 Spokane Hardware Supply, Inc. Cabinet Hardware Furniture Components Rolling Door Hardware Cabinet Organizers Commercial Hardware BP250 SINGLE ALUMINUM TRACK Stanley v-groove aluminum track. For single door, pocket, bypass and bi-fold applications. Track only, Stanley door hanger sets sold separately (see compatible components to follow). BYPASS HANGERS - PAIR & 250lb. SIZE BP " BP " BP " For installation of one bypassing or pocket door. Includes: (1pr) hanger plates; (1pr) four-wheel hangers; (1ea) wrench; and screws. BP250N-41: Ball-bearing hangers, for doors up to 250lbs. BP150N-41: Standard hangers, for doors up to 150lbs. Large 1" wheels provide smooth action. Easy to install snap-in feature makes hangers a "snap" to install. Vertical adjustments can be made after installation. For use with Stanley BP250 track (sold separately). BP250N LB. HANGER 5 PAIR BP150N LB. HANGER 5 PAIR BYPASS HANGER S & 250lb. For installation of 2 bypassing doors Includes: (2pr.) hanger plates; (2pr.) four-wheel hangers; (1ea.) wrench; and (1ea.) adjustable floor guide for 1-3/8" to 1-3/4" thick bypassing doors. BP250N-HDW: Ball-bearing hangers, for doors up to 250lbs. BP150N-HDW: Standard hangers, for doors up to 150lbs. Same specifications as BP150/BP250 hangers above. For use with Stanley BP250 track (sold separately). BP250N-HDW LB. HANGER BP150N-HDW LB. HANGER BYPASS TRACK ACCESSORIES BP For 3/4" to 1-3/8" thick by-passing doors. BP250-77: Center Stop Attaches to track, limiting panel travel. 168 BP For 1-3/8" to 1-3/4" thick by-passing doors. BP ADJ. FLOOR GUIDE FOR 3/4" TO 1-3/8" DOORS BP ADJ. FLOOR GUIDE FOR 1-3/8" TO 1-3/4" DOORS BP CENTER STOP Visit us online at Call us Toll-Free: or Local:
5 Spokane Hardware Supply, Inc. Drawer Slides Window Hardware Rolling Door Hardware Builders Hardware Hand Tools BPC150N BYPASS HARDWARE - COMPLETE PACKAGED TRACK S - 150lb. For installation of 2 by-passing doors weighing up to 150lbs. each; 1-3/8" to 1-3/4" thick Stanley ByPass Door Track Set Includes: (2ea) aluminum track; (2pr) four-wheel hangers; (2pr) hanger plates; (1ea) adjustable floor guide for 1-3/8" to 1-3/4" thick bypassing doors; (2ea) track spacers; wrench, screws and instructions. Large 1" wheels provide smooth action. Easy to install snap-in feature. OPENING DOOR WIDTH ' (2 Door) 3'0" ' (2 Door) 4'0" 6 BI-FOLD HANGER & PIVOT S - 125lb. For installation of 2 doors weighing up to 125lbs. each or multi-panels weighing up to 75lbs. each; 1-1/8" to 1-3/4" thick. BF125N-31: Bi-Fold Pivot Set Includes: (1ea) top pivot assembly; (1ea) bottom pivot assembly; (1ea) door snugger spring; and screws. Fits into 1-3/4" deep, 3/8" diam. hole in door. BF125N-41: BiFold Hanger Set Includes: (1ea) hanger plate; (1ea) four-wheel ball-bearing hanger; (1ea) wrench; and screws. Large 1" ball-bearing wheels provide smooth action. Easy to install snap-in feature makes hangers a "snap" to install. Vertical adjustments can be made after installation. For use with Stanley BP250 track (sold separately). BF125N LB. Bi-fold Top & Bottom Pivot Set BF125N LB. Bi-Fold Hanger Set POCKET DOOR HARDWARE - 150lb. PD Pocket door guide BF125N PIVOT BF125N HANGER PD150-HDW: For installation of pocket or bi-parting doors, 1" to 1-3/4" thick, weighing up to 150lbs. each. Pocket Door Hanger Set Includes: (2ea) hanger plates; (2ea) four-wheel hangers; (1ea) door guide; (1ea) wrench; (1ea) bumper stop; nails, screws & instructions. Large 1" wheels provide smooth action. Easy to install snap-in feature makes hangers a "snap" to install. Vertical adjustments can be made after installation. For use with Stanley BP250 track (sold separately). PD150N-HDW COMPLETE PD /8" GUIDE 50 Toll-Free Phone: Local Phone: Toll-Free Fax: Local Fax:
6 Cabinet Hardware Furniture Components Rolling Door Hardware Cabinet Organizers Commercial Hardware PD75 POCKET DOOR HARDWARE - 75LB. POCKET DOOR KITS For installation of one sliding pocket or along-the-wall door weighing up to 75lbs.; 3/4" to 1-3/4" thick Set Includes: (1ea) galvanized steel track; (2ea) adjustable hangers; adjustable door guide (for pocket installations); adjustable door guide (for alongthe-wall installations); door stop (for along-the-wall installations; bumper stop (for pocket installations); adjusting wrench, screws and instructions. Pre-finished v-shaped track is jump-proof Twin-wheel hangers provide smooth and quiet operation OPENING SIZE ' 6 Set contents: frame, track, two tricycle hangers, door guides, door bumper, adj. wrench, screws & instructions. For 1-3/8" or 1-3/4" door panels up to 125 lbs. Standard 6'8" height. Steel encased frame provides greater wall rigidity. Jump-proof track, convex rails keep hangers on track. Tricycle hangers glide smoothly, easily & quietly. POCKET DOOR ACCESSORIES SIZE PF 3'0" - 6'8" PF 3'0" - 7'0" PF 4'0" - 6'8" : For doors up to 125 lbs PPK3: contains both 1811 and 1807 pivots. 1125: For doors up to 200 lbs PPK1, 2136PPK1 1832PPK3 1555PPK3: For joining two pocket frames WHEEL HANGER HEAVY-DUTY HANGER DOOR BUMPER PLASTIC DOOR GUIDES 0 PAIR HARDWARE PACK 1832PPK3 UNIVERSAL PIVOT PACK 2135PPK1 FLOOR GUIDE PACK 2136PPK1 CARPET RISER PACK 1555PPK3 CONVERGING DOOR KIT PACK SHS - One complete source for all of your finish hardware needs. 170 Visit us online at Call us Toll-Free: or Local:
7 Drawer Slides Window Hardware Slilding Door Hardware Builders Hardware Hand Tools HEAVY DUTY POCKET DOOR LATCHES POCKET DOOR LATCHES POCKET DOOR LATCHES Solid brass. For 1-3/8" to 1-3/4" thick doors. Non-handed. SDLA325/SDPA325 Door Cutout Size: 2-3/4"H x 1-3/4"W. Overall Size: 3-1/4"H x 2-1/4"W. SDL25/SDP25 (DULL CHROME ONLY) Door Cutout Size: 2-1/4"H x 1-3/4"W. Overall Size: 2-3/4"H x 2-1/2"W. Solid brass. For 1-3/8" to 1-1/2" thick doors. Non-handed. Door Cutout Size: 2-1/4"H x 1-3/4"W. Overall Size: 2-3/4"H x 2-1/2"W. FUNCTION FINISH SDPA325CR003 PASSAGE LIFETIME BRASS SDPA325U3 PASSAGE POLISHED BRASS SDPA325U5 PASSAGE ANTIQUE BRASS SDPA325U26 PASSAGE POLISHED CHROME SDPA325U26D PASSAGE DULL CHROME SDP25U26D PASSAGE DULL CHROME SDPA325U19 PASSAGE FLAT BLACK SDPA325U15A PASSAGE ANTIQUE NICKEL SDPA325U15 PASSAGE SATIN NICKEL SDPA325UB PASSAGE OIL RUBBED BRZ. SDLA325CR003 PRIVACY LIFETIME BRASS SDLA325U3 PRIVACY POLISHED BRASS SDLA325U5 PRIVACY ANTIQUE BRASS SDLA325U26 PRIVACY POLISHED CHROME SDLA325U26D PRIVACY DULL CHROME SDL25U26D PRIVACY DULL CHROME SDLA325U19 PRIVACY FLAT BLACK SDLA325U15A PRIVACY ANTIQUE NICKEL SDLA325U15 PRIVACY SATIN NICKEL SDLA325UB PRIVACY OIL RUBBED BRZ. FUNCTIO FINISH 990B3 PASSAGE BRIGHT BRASS 5 CP990B5 PASSAGE ANTIQUE BRASS 5 990B26 PASSAGE POLISHED CHROME 5 990B-406 PASSAGE MATTE BLACK 5 990B613 PASSAGE OIL RUBBED BRNZ B716 PASSAGE AGED BRONZE 990B619 PASSAGE SATIN NICKEL 5 990B620 PASSAGE ANTIQUE NICKEL 5 991B3 PRIVACY BRIGHT BRASS 5 CP991B5 PRIVACY ANTIQUE BRASS 5 991B26 PRIVACY POLISHED CHROME 5 991B-406 PRIVACY MATTE BLACK 5 991B613 PRIVACY OIL RUBBED BRNZ B716 PRIVACY AGED BRONZE 5 991B619 PRIVACY SATIN NICKEL 5 991B620 PRIVACY ANTIQUE NICKEL 5 NOTE: Will fit OLD Weiser size cutout. For 1-3/8" to 1-3/4" thick doors. Non-handed. Cutout Size: 2-7/8"H x 1-3/4"W. Overall dimensions: 3-3/4"H x 2-3/8"W. Solid brass, lifetime finish warranty. FUNCTION FINISH PD PASSAGE BR. BRASS 5 PD PRIVACY BR. BRASS 5 Toll-Free Phone: Local Phone: Toll-Free Fax: Local Fax:
8 Cabinet Hardware Furniture Components Pocket Door Hardware Cabinet Organizers Commercial Hardware SLIDING POCKET LATCHES Can be used for converging doors. SLIDING DOOR EDGE PULL POCKET DOOR PRIVACY BOLT For 1-3/8" thick doors only. Use 2-1/8" bore, 2-3/8" backset. Features automatic latching. Non-handed. Size: 3-7/8" x 3/4" x 1-5/8". Individually poly-bagged with screws. 3/4" width facilitates use with thin door. FUNCTION FINISH PK1 PASSAGE BRASS PK1 PRIVACY BRASS 5 230BB OIL RUBBED BRZ. 230B15 SATIN NICKEL 230B15A ANTIQUE NICKEL 230B3 BRIGHT BRASS 230B5 ANTIQUE BRASS 230B26D DULL CHROME Overall Size: 3-1/16"H x 1-5/32"W x 5/8"D. Strike: 1" x 3/4". Designed to face mount on the jamb side of a pocket door. Acts like a rocker switch, when pushed in, the other half pops out, physically preventing the door from returning into its pocket. Emergency release from outside, finish washer included. Made of wrought brass. 42BB OIL RUBBED BRZ. 42B15 SATIN NICKEL 42B15A ANTIQUE NICKEL 42B3 BRIGHT BRASS SLIDING POCKET DOOR LOCK For 1-3/8" to 1-3/4" thick doors. Includes strike, finishing ring & two keys. All metal construction. BX62-US3 BR.BRASS 6 FOLDING DOOR LOCK SLIDING DOOR LOCK For 3/4" to 1-3/8" thick doors. For any four-door bi-fold installation. Includes: strike, finishing ring & two keys. Only one 3/4" hold needed in one of the center panels. CD64-US3 BR.BRASS 5 For 3/4" to 1-3/4" thick doors. Finishing ring & two keys furnished. Positive-action design with lock cylinder geared directly to the tongue. One-half turn of key lock or unlocks. CD68-US3 BR.BRASS Visit us online at Call us Toll-Free: or Local:
9 Drawer Slides Window Hardware Flush Door Pulls Builders Hardware Hand Tools FLUSH DOOR PULLS 4 per package. Cup Diameter: 3/4". Overall Diameter: 1". Depth: 5/16". Solid brass. 218BB3 BR. BRASS 218BB5 ANT. BRASS 218BB15 SATIN NICKEL 218BB15A ANT. NICKEL 218BBB OIL RUBBED BRZ. 218BB19 MATTE BLACK Cup Diameter: 2-1/8". 221B Overall Diameter: 2-7/16". Depth: 7/16". Built-in prong design that eliminates need for screws or brads. Solid brass. 221B3 BR. BRASS B5 ANT. BRASS B15 SATIN NICKEL B15A ANT. NICKEL BB OIL RUBBED BRZ B19 MATTE BLACK B-716 AGED BRONZE B26 BR. CHROME B26D DULL CHR B26D DULL CHR. 20 Height: 3-1/8". Width: 1-5/8". Depth: 7/16". Solid brass. 222B3 BR. BRASS 222B5 ANT. BRASS 222B15 SATIN NICKEL 222B15A ANT. NICKEL 222B526D DULL CHROME Height: 3-1/2". Width: 1-1/4". Depth: 1/2". Solid brass. FP223U3 BR. BRASS 50 FP223U5 ANT. BRASS 50 FP223U15 SATIN NICKEL 50 FP223U15A ANT. NICKEL 50 FP223U26D DULL CHROME 50 Height: 4". Width: 2". Depth: 7/16". Cutout Size: 3-1/8"H x 1-3/8"W Solid stainless steel. FP155 US32D SAT. STAINLESS More flush pulls available online. Toll-Free Phone: Local Phone: Toll-Free Fax: Local Fax:
Sliding Door Hardware Bi-fold By-Pass Pocket
Sliding Door Hardware Bi-fold By-Pass Pocket Sliding Door Hardware The John Sterling Sliding Door Hardware products offer a complete line of hardware for interior sliding Bi-Fold doors, By-Pass doors,
More informationHARDWARE STANLEY ARCHITECTURAL HARDWARE
HARDWARE STANLEY ARCHITECTURAL HARDWARE STANLEY ARCHITECTURAL HARDWARE TABLE OF CONTENTS Page Company history...2 Wardrobe pivots...3, 4 Cabinet hinges... Cabinet pulls..., 6 Cabinet knobs...6 Cabinet
More informationINSTALLATION INSTRUCTIONS for Bifold Doors (JII103)
Thank you for selecting JELD-WEN products. Attached are JELD-WEN s recommended installation instructions for premium composite, hollow and solid core molded Bifold Doors. Bifolds are designed for fast
More informationCombination & Screen Doors
Combination & Screen Doors www.bbwood.com WOOD SCREEN DOORS Removable Screens (RS) SPECIFICATIONS: Stiles and Top Rail 2-9/16 Cross Rails Bottom Rail Vertical Mull 7/8 #206 #201 58-RS 764-RS V52-RS 2 2
More informationAndersen Clad Inswing Entry Doors (2001 to Present)
Andersen Clad Inswing Entry Doors (2001 to Present) What s in This Section Clad Inswing Entry Doors Page 3 Part Illustrations 3 Parts Illustration - Single Door 3 Parts Illustration - Double Door 4 Parts
More informationSECTION 6. Glass Storefront Doors:
SECTION 6 Glass Storefront Doors: Table of Contents 3070 Storefront Door System Description & Dimensions 6070 Storefront Door System Description & Dimensions Door Leaf Detail Optional 10 Bottom Rail Detail
More informationArchitectural Hardware Design Guide High-performance hardware for the most demanding architectural applications
08710/STA BuyLine Architectural Hardware Design Guide High-performance hardware for the most demanding architectural applications Architectural Hardware Design Guide The full range of Stanley hinges provides
More informationCI/SfB. (31.59) X NOVEMBER 2003 Coburn Interior Sliding Systems
Uniclass L4181 EPIC D181 CI/SfB (31.59) X NOVEMBER 2003 Coburn Interior Sliding Systems Interior Sliding Door Gears FOR CUPBOARDS, WARDROBES, INTERIOR SLIDING AND FOLDING DOORS A comprehensive range of
More informationCLEAR-DIVISIONS VARIOFOLD
CLEAR-DIVISIONS VARIOFOLD Introduction: The following three (3) part specification offers the Standard and Optional features for the CLEAR-DIVISIONS VARIOFOLD moveable The yellow highlighted areas in the
More informationCLEAR-DIVISIONS CENTERFOLD
CLEAR-DIVISIONS CENTERFOLD Introduction: The following three (3) part specification offers the Standard and Optional features for the CLEAR-DIVISIONS CENTERFOLD moveable The yellow highlighted areas in
More informationSliding and Folding Door Fittings Sliding Door Accessories
Sliding door lock Toplock For 1- and 2-leaf sliding doors Suitable for toughened safty glass and laminated sheet glass Suitable for DIN left and DIN right Max. weight per door leaf 120 kg For glass thickness:
More informationReachout Lock Replacement for Andersen 2-Panel and 4-Panel 400 Series Frenchwood Gliding, 200 Series Narroline, and Perma-Shield Gliding Patio Doors
for Andersen 2-Panel and 4-Panel 400 Series Frenchwood Gliding, 200 Series Narroline, and Perma-Shield Gliding Patio Doors Thank you for choosing Andersen. For questions call 1-888-888-7020. For more information
More informationCall for Availability
A-100 A-101 13/16" 2-11/16" A-100 (Left hand) A-101 (Right hand) (Anodized aluminum) Contents: 1 inside pull; 1 strike; Left Hand Shown 2-5/8" Description: Surface-mount; used by many manufacturers. You
More informationDIRECTIONS FOR ASSEMBLING BASE & WALL CABINETS
DIRECTIONS FOR ASSEMBLING BASE & WALL CABINETS TheRTAStore.com STEP 1: CLEAR A WORK SPACE Place your RTA cabinet panels on a smooth, scratch resistant surface in a large, open area. (Some people like to
More informationHow To Fit A Portman Door Leaf
Portman Sliding Door Gear Timber/Frames Doors Frameless Glass Doors Top track Portman top tracks are suitable for door leaves of up to 80kg as standard Material is 6063T6 aluminium alloy anodised to 15
More informationProduct Catalog Phone: 800-321-9602 Fax: 800-328-6070
Product Catalog Phone: 800-321-9602 Fax: 800-328-6070 IVES 2 Table of Contents Flush Bolts...Page 4 Architectural Door Trim...Page 4 Floor Stops, Wall Stops & Bumpers...Pages 5-6 Surface Bolts, Dutch Door
More informationCLEAR-DIVISIONS APERTO
CLEAR-DIVISIONS Introduction: The following three (3) part specification offers the Standard and Optional features for the CLEAR-DIVISIONS moveable glass wall system. The yellow highlighted areas in the
More informationAll-Season Sunroom Sliding Glass Door Installation Instructions
ASRESGD-08 All-Season Sunroom Sliding Glass Door Installation Instructions Panel Frame Door Frame Left Side Foam Insulator IE241 H Bar Assembly Door Frame Top Track Panel Frame Door Frame Right Side Stationary
More informationglass & Glazing Products
glass & Glazing Products WallMaker Create an unlimited variety of bright, beautiful and secure interior environments with the easy-to-install Stylmark WallMaker glass wall system. This versatile system
More informationTechnical data sheet PVC Bi-fold doors
Standard Specifications White internally beaded, Deceuninck 3000 series profile 28mm Low-e toughened sealed units with argon gas Open in doors with white handles and hinges Tracks are fitted to the top
More informationArchitectural Casework 06400-01. 1.01 Description of Work
06400-01 1.01 Description of Work A. Extent of each type of architectural millwork and casework as indicated on drawings. Types of architectural casework shall include both stained and plastic laminated
More informationHALE PET DOOR INSTALLATION INSTRUCTIONS HALE STANDARD PANEL MODEL
HALE PET DOOR INSTALLATION INSTRUCTIONS HALE STANDARD PANEL MODEL Please read these instructions carefully and completely before attempting to install Hale Pet Doors; they will guide you through the steps
More information280+ Mortise Mounted Series Shear Locks Special Application Solution
280+ Mortise Mounted Series Shear Locks Power Plus control module overcomes gaps of up to 1/4" Low Temperature Operation 280+ TRD Locknetics provides the industry s most complete selection of electromagnetic
More informationAutomatic Door Selection Guide
Automatic Door Selection Guide AAADM 1300 Sumner Avenue Cleveland, OH 44115 P: 216-241-7333 F: 216-241-0105 aaadm@aaadm.com Automatic Door Selection Guide General: The members of AAADM manufacture an assortment
More informationSECTION REFERENCE. Tilt-Wash Double-Hung. Insert Windows. 400 Series
SECTION REFERENCE Size Ranges... 96 Existing Window Measurements... 96 Divided Light Patterns... 97 Window Details... 97 Joining Details... 97 Performance Data... 269 400 Series Windows TILT-WASH DOUBLE-HUNG
More informationInformation Technology Solutions
Information Technology Solutions Aluminum Sliding Door Assembly Instructions Shield Doors & Windows Bi-fold Door Assembly Instructions For Support Please Call 03 8339 2252 Aluminum Sliding Door Assembly
More informationPremier & Deluxe 3-Season Room Sliding Glass Door
DTSSGD-11 Premier & Deluxe 3-Season Room Sliding Glass Door Installation Instructions Screen Door Seal Left Side Track Top Track Assembly Right Side Track Right Side Trim Sliding Glass Door Sliding Screen
More informationKey in Knob & Key in Lever
Key in Knob & Key in Lever We take the worry out of protecting what s valuable to you. Lockwood: no worries www.lockweb.com.au Contents 530 Series Key in Knob & Key in Lever Door Furniture Locksets 930/950
More informationBUILD A TABLETOP LOOM
BUILD A TABLETOP LOOM From 1" x 2" stock (actual 3/4" x 1"1/2) cut: 4 pieces 15" long 4 pieces 5"1/2 long Use the above to make 2 frames for the front and back of the loom. From 1" x 4" stock (actual 3/4"
More informationWHI 90-Minute Rated Veneered Door Frame Installation Instructions
No. 940-03-10 INSTALLATION INSTRUCTIONS 90 MINUTE RATED VENEERED DOOR FRAME DOOR REQUIREMENTS: Consult the door manufacturer to make sure that the doors are qualified for the hardware to be installed,
More informationCONCEALED BEARING HINGES. StANLEy ARCHItECtuRAL HARDwARE
CONCEALED BEARING HINGES StANLEy ARCHItECtuRAL HARDwARE STANLEY ARCHITECTURAL HARDWARE TABLE OF CONTENTS Page Table of contents...2 Company history...2 5 knuckle concealed bearing design...3 Full mortise
More informationDIY CABINET REFACING INSTALLATION GUIDE
DIY CABINET REFACING INSTALLATION GUIDE CABINET REFACING INSTALLATION Are you ready to reface your outdated cabinets? This guide will show you how to install your new Facelifters Cabinet Refacing Products
More informationAriva Powerful Marketing Displays. Exhibit & Display Solutions
Ariva Powerful Marketing Displays Exhibit & Display Solutions Banner Displays BRONZE BRONZE XL (see page 3) (see page 3) Retractable banner stand Twist-out feet Black or silver finish Silver retractable
More informationEXTeRUS. EXTeRUS - With patented design, able to join technology. and quality of materials with a charming shape. Unique
EXTeR US G L A S S - With patented design, able to join technology and quality of materials with a charming shape. Unique thanks to its outstanding loading capability with 150 kg maximum weight and height
More informationNEWSTAR BROCHURE. December 2007
NEWSTAR BROCHURE December 2007 Surface Overhead Door Closers Door Closing 5003 Silver Slide Cover SE Door Widths from 850mm to 1100mm. Door Weights 40kg to 80kg. Suitable for use in temperatures from -15
More informationINSTRUCTION MANUAL AND PARTS LIST MODEL 14-10
VERTICAL BAND SAWS INSTRUCTION MANUAL AND PARTS LIST MODEL 1-10 DAKE/PARMA WHEN ORDERING PARTS GIVE COMPLETE SERIAL NUMBER OF MACHINE GIVE PART NUMBER AND NAME GIVE AMOUNT REQUIRED Unless the above data
More informationK17.11 DOOR BOLTS K17 DOORS 01.09.2013
K17 DOORS K17.11 01.09.2013 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS 1. Locking set series 86000...K17.11.03 2.
More informationDoor Hardware Lock Specifications
Door Hardware Lock Specifications Directory Lock Type Page Exterior Mortise Lock Specifications... 2 2.5 Backset Mortise Locks Specification... 3 2.5 Backset Mortise Lock Functions (6301, 6310, 6315, 6318,
More informationLift-off hinge. Rising hinge. Standard hinge. Heavy duty hinge. Parliament hinge. Spring hinge. Double action spring hinge. Concealed mortise hinge...
Door Hinges Contents Butt hinges Lift-off hinge Rising hinge Standard hinge Heavy duty hinge Parliament hinge Spring hinge Double action spring hinge Concealed hinges Concealed mortise hinge... Pivot
More informationHINGE & TRIM. philihardware.com
HINGE & TRIM philihardware.com Residential Hinges 0.687" 0.360" 0.087" 1.406" 3 1 /2" 0.437" 1.406" 0.344" 1 /4" R 3 1 /2" 0.062" 0.781" 0.437" 0.087 RH3503 US3 1" 1" 4" 0.437" Plain Bearing 1/4 radius
More informationRTS88. Overhead Concealed Door Closer
RTS88 Overhead Concealed Door Closer RTS88 OVERHEAD CONCEALED CLOSER DORMA RTS88 OVERHEAD CONCEALED DOOR CLOSER Invisible door control Dependable and easy to install Architects are often challenged to
More informationINDUSTRIAL & COMMERCIAL DOOR HARDWARE
C R O W N I N D U S T R I A L INDUSTRIAL & COMMERCIAL DOOR HARDWARE "BARN DOOR HARDWARE" SLIDE DOOR HARDWARE SWING DOOR HARDWARE SLIDE-FOLD DOOR HARDWARE 213 MICHELLE COURT SOUTH SAN FRANCISCO, CA 94080
More informationDE Frame with C Series Sidelight
TOOLS REQUIRED Tape measure 6' magnetic level 3' magnetic level Screw gun with clutch adjusted #2 phillips tip #3 phillips tip Screwdriver (used to adjust frame on will using oval slots) Pry Bar Powder
More informationInstallation Instructions and Ordering Information
The Flush Finish Trimless Door Frame Installation Instructions and Ordering Information CLEAN LINES! The Flush Finish Door Jamb System Manufactured by STUDCO Building Systems Step 1 Verify if you are using
More informationFloor-Concealed Door Closers DORMA BTS80
Floor-Concealed Door Closers DORMA BTS80 Floor-Concealed Door Closers Dependable and Versatile Floor-Concealed Closer The BTS80 Series of floor-concealed door closers offer adaptability to almost any installation.
More informationService Manual Rol-Lift
R 2000 Service Manual Rol-Lift Series: T and E Developed by Generic Parts Service This manual is intended for basic service and maintenance of the Rol-Lift pallet jack. The pallet jacks you are servicing
More informationSlides and Drawers. The right collection
Slides and Drawers The right collection 1Technical Details Drawer Runners Carrying capacity Kg. Static load Dynamic load Pag. 01 Concealed Runners Excel N Excel N Excel N Excel N650 Excel N Excel PlugIn,
More informationSpeed-Mat Rectangle Cutter
Speed-Mat Rectangle Cutter 1 Honeycomb baseboard. 2 Left hold down. 14 3 Bottom hold down. 4 4 Left / right rule. 8 5 8 5 Left / right rule pointer. 1 6 Top / bottom rule. 7 Top / bottom rule pointer.
More informationJames M. Pleasants Company
James M. Pleasants Company SUBMITTAL DATA GAINESVILLE MECHANICAL DECEMBER 20, 2013 PROJECT: GSU: J-183 HUMANITIES LAW BLDG. QUOTE NO:12116 ENGINEER: STEVENS & WILKINSON GASKETED PLATE HEAT EXCHANGER Tag:
More informationTOILET TOILET INSTALLATION KIT WALL CONNECTION
TOILET INSTALLATION KITS BP-A1FPTBR TOILET INSTALLATION KIT WALL CONNECTION FLEX 12" BP-A2FPTBR TOILET INSTALLATION KIT WALL CONNECTION FLEX 16" BP-A2PTB BATHROOM SINK INSTALLATION KIT 1-1/2" WALL CONNECTION
More informationAssembly and Usage Instructions
Assembly and Usage Instructions A Product 5885 West Van Horn Tavern Road Columbia, MO 65203 www.caldwellshooting.com Instruction #1001667 Limited Warranty Every Caldwell product is warrantied to be free
More informationC O N V E Y O R C O M P O N E N T S C H A I N S B E L T S B E A R I N G S
C O N V E Y O R C O M P O N E N T S C H A I N S B E L T S B E A R I N G S January 2009 Issue 6 Valu Guide Brackets The Ultimate in Adjustability and Cost Savings Valu Guide brackets are part of a family
More informationINSTRUCTIONS THOROUGHLY BEFORE BEGINNING***************
Bill of Materials: RAC0012 Green Wing Aerodynamic Skirt Kit Item Part Number Description Quantity 1 RMC0218 Gen 2 Trailer Skirt Roadside 1 2 RMC0219 Gen 2 Trailer Skirt Curbside 1 3 RMC0041 Trailer Skirt
More informationBasic Technical Fundamentals of Builders Hardware
Basic Technical Fundamentals of Builders Hardware Mortise Locks Bored Locks Auxiliary Locks Inside Cover (blank) Table of Contents SARGENT History...4 Basic Name of Products...5, 6 Doors (A Brief Review)...7
More informationHow you select and where to install me! Kitchen BE CAREFUL OF FOLLOWING PARAMETERS : A- Plumbing space needed (specifically the height).
Environment, recycling, selective collect Today, to convert a house to recycling, a house should have necessary methods and tools. Richelieu, always ahead of practical solutions, offers management and
More informationCabinet Locks. Benefits:
Cabinet Locks Medeco high security cabinet locks are specifically designed for drawer or cabinet door applications where a conventional utility cam lock may not be suitable. Cabinet locks utilize heavy-duty
More informationSliding Barn Door Hardware Installation Instructions BALDUR and ODEN
Sliding Barn Door Hardware Installation Instructions BALDUR and ODEN Installation Instructions Structural Information For standard systems and most custom single door opening systems. General Overview
More informationRittal s Comprehensive Family Of... NETWORK RACK SOLUTIONS
Rittal s Comprehensive Family Of... NETWORK RACK SOLUTIONS STANDARD & ECONOMICAL BasicRack A complete low-cost, high-quality basic equipment management system. Design Six web channel holes per side allow
More informationBasic Technical Fundamentals of Builders Hardware Mortise, Bored and Auxiliary Locks
Mortise, Bored and Auxiliary Locks Copyright 2002, 2009, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Table of Contents Page SARGENT History...................................................
More informationCluster Box Units. (CBU s) 3300 Series CBU Door Sizes. Fully Integrated Parcel Lockers CLUSTER BOX UNITS FRONT LOADING. continued on pages 7-11
Cluster Box Units (CBU s) continued on pages 7-11 CLUSTER BOX UNITS FRONT LOADING Made of heavy duty aluminum and stainless steel hardware, Salsbury 3300 series U.S.P.S. approved Cluster Box Units (CBU
More informationResidential Garage Door Terminology
A Air Infiltration: The leakage or passage of air through a door system Anodize: A hard non-corrosive oxide film on the surface of aluminum Astragal: A compressible or deformable seal provided on the bottom
More informationSierra Pacific Windows
Sierra Pacific Windows Bi-Fold Windows & Doors Sierra Pacific Bi-fold Windows and Doors glide smoothly to create large openings that transform your living spaces. With panels folding and stacking either
More informationManual for GlobePharma Mini-Press II Rotary Tablet Press
1 of 13 Preparing the Rotary Press 1. Make sure the rotary press is unplugged. 2. Open the bottom cabinet of the rotary press and take out the grey tool kit, and the beige box of punches and dies. 3. Take
More informationSimplex 1000 Series. All Simplex Controls are less I.C. core. 1000 Series packed with both ASA and T strike.
Kaba Mechanical Lock Price Book, May 1, 2015 Simplex 1000 Series All Simplex Controls are less I.C. core. 1000 Series packed with both ASA and T strike. KNOBS 26D 05 03 1011 Standard Access Control 450.50
More informationHMMA 830 HARDWARE SELECTION FOR HOLLOW METAL DOORS AND FRAMES HOLLOW METAL MANUAL -02 NAAMM STANDARD METAL DOORS & FRAMES NAAMM 01 NAAMM 01
HOLLOW METAL MANUAL NAAMM STANDARD HMMA 830-02 METAL S & FRAMES 8d NAAMM 01 02 HARDWARE SELECTION FOR HOLLOW METAL S AND FRAMES NAAMM 01 02 8d METAL S & FRAMES A Division of HOLLOW METAL MANUFACTURERS
More informationLU6X-130 Instructions and Parts List (including LU6X Basic) Operating Instructions
LORTONE LU6X-130 Item # 061-092 LU6X Basic Item # 061-090 LU6X-130 Instructions and Parts List (including LU6X Basic) Operating Instructions Introduction The LU6X is one the most versatile pieces of equipment
More informationInterior Pocket Door System. A hiding gliding sliding door
Interior Pocket Door System hiding gliding sliding door Introduction good fit for you & the room too Our range of Whatever the style or budget we ve got a choice of 3 sliding pocket door systems that will
More informationSliding Door Hardware Installation Instructions
Sliding Door Hardware Installation Instructions Installation Instructions Structural Information For standard systems and most custom single door opening systems. General Overview ff All Krown Lab sliding
More information1958-64 WINDOW CHANNEL, WEATHERSTRIP & WHISKER STRIP REPLACEMENT FOR 2-DOOR SEDANS
By Denny Williams Photos by Denny Williams 1958-64 WINDOW CHANNEL, WEATHERSTRIP & WHISKER STRIP REPLACEMENT FOR 2-DOOR SEDANS Denny Williams - Technical Writer Denny is first and foremost a dyed-in-thewool
More information19 DYNAmax Free Standing Server C A B I N E T s
9 DYNAmax Free Standing Server C A B I N E T s 9 DYNAmax Free Standing Server Cabinets FAMILY W=600mm and W=800mm DYNAmax Series Free Standing Server Cabinets DYNAmax series Servering Enclosures, provide
More informationCarton - Straight Link Machine Chain (Order Unit is Feet )
Straight Link Machine Individual chain links shown actual size in reference section page 44. Carton Uses: General utility; farm and animal Standard Material: Low carbon steel Standard Finish: Bright (BRT),
More informationPHA 2000 PHB 3000 EXIT PAD
PHA 2000 PHB 000 EXIT PAD Panic Hardware in Contur Design PHA 2000 PHB 000 EXIT PAD THE MODULAR PANIC HARDWARE-SSTEM IN CONTUR DESIGN Prior knowledge of how to open the escape door is not expected. DANGER
More informationTelescoping Post Indicator Wall Post KENNEDY VALVE ISO 9000 ISO 14001
Telescoping Post Indicator Wall Post KENNEDY VALVE ISO 9000 ISO 14001 Telescoping Post Indicator 2945 A 1" SQUARE STEM 9" MAX. = 10" MIN. = 7" FIELD ADJUSTMENT INSTRUCTIONS 1. Remove the top section from
More informationDIGITUS Network & Server Cabinets. UNIQUE Series
DIGITUS Network & Server Cabinets UNIQUE Series Benefits - Server Rack 4-Point locking system front door 3-point locking system rear door Swing handle lock with profile zylinder in front and rear door
More informationCATALOGO PRODOTTI PORTONI INDUSTRIALI COIBENTATI
CATALOGO PRODOTTI PORTONI INDUSTRIALI COIBENTATI The Company Founded in 1973 by Mr Imes Tinti in association with his son Vanni Tinti. In 1999 the locksmith workshop became a modern industrial company
More informationCustomized Server Cabinets
GOING GREEN WITH CUSTOMIZABLE CABINETS AND RACKS Designed to provide industry leading airflow, CyrusOne s cabinets and rack solutions promote optimal cooling and contribute to reduced power consumption.
More informationWINDOW REPAIR MANUAL & REFERENCE GUIDE
WINDOW REPAIR MANUAL & REFERENCE GUIDE TABLE OF CONTENTS DOUBLE HUNG & SINGLE HUNG PARTS 4-5 CASEMENT PARTS 6 SCREEN PARTS 7-8 HOW TO REMOVE TILT-IN SASH 9 HOW TO REMOVE A BALANCE 10 HOW TO INSTALL BALANCE
More informationINDICATOR POST STYLE 2945 A TELESCOPING BARREL ASSEMBLY UL AND FM APPROVED
INDICATOR POST STYLE 2945 A TELESCOPING BARREL ASSEMBLY UL AND FM APPROVED Available in Sizes B C D E See Page 6 for Dimensions Kennedy Valve/Indicator Posts 17-1 INDICATOR POST STYLE 2945 A TELESCOPING
More informationSPIRAL STAIR KIT INSTALLATION MANUAL
SPIRAL STAIR KIT INSTALLATION MANUAL Effective January 1, 2014 If you have any questions, please call the location that your Stair Kit was purchased from: Broomall, Pennsylvania 1-800-52-7427 Ontario,
More informationcontents classic 3 switch 4 mini swing 5 sign wedge 6 chalkboards 7 all purpose A frames 8 H2O swingmaster 9 café banner 10 vision 11
the sign selection pavement swing signs pavement foil signs A boards forecourt signs pavement banner stand systems A frame banners promotion units snapframe signage suspended poster rails contents PAVEMENT
More informationDecorative Lever Designs
Decorative Lever Designs 3 & C 4 & K 12 14 & D 15 & A 16 & B 17 50 51 52 53 54 55 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 2 www.stanleysecuritysolutions.com
More information19 DYNAmax Free Standing Server C A B I N E T s
9 DYNAmax Free Standing Server C A B I N E T s 9 DYNAmax Free Standing Server Cabinets FAMILY W=mm and W=800mm DYNAmax Series Free Standing Server Cabinets DYNAmax series Servering Enclosures, provide
More informationModels A spe n, Econoline C o l o n i al. and Savoy. Installation Instructions. Contractors Wardrobe
Installation Instructions Models A spe n, Econoline C o l o n i al and Savoy Contractors Wardrobe DESIGNERS MANUFACTURERS TOLL FREE: (800) CW-DOORS (800) 293-77 www.cwdoor.com 2121 Avenue Hall Valencia,
More informationS&G Model 2937 Group 1 Combination Lock
Installation and Combination Changing Instructions S&G Model 2937 Group 1 Combination Lock NOTE: READ COMPLETE INSTRUCTIONS BEFORE INSTALLATION These instructions should be followed when installing the
More informationLunette 2 Series. Curved Fixed Frame Projection Screen. User s Guide
Lunette 2 Series Curved Fixed Frame Projection Screen User s Guide Important Safety and Warning Precautions Please follow these instructions carefully to ensure proper maintenance and safety with your
More informationTOLL FREE: (866) 591-7792. E-Mail: techmail@vigoindustries.com. www.vigoindustries.com VANITY SPECIFICATIONS. VANITY COMPONENTS Model VG09042K1
VANITY SPECIFICATIONS VANITY COMPONENTS Model VG09042K1 MODEL VG09042K1 FEATURES Freestanding cabinet Soft closing sliding cabinet drawer hardware White, single hole ceramic sink Cabinet ships assembled
More informationOWNER S MANUAL Table Tennis Table Patent Pending
OWNER S MANUAL Table Tennis Table Patent Pending Be sure to write your model number and serial number here for future reference. You can find these numbers printed on the bottom of the table. MODEL # T8179
More informationFloor-Concealed Door Closers with Electromagnetic Hydraulic Hold Open DORMA BTS80 EMB
Floor-Concealed Door Closers with Electromagnetic Hydraulic Hold Open DORMA BTS80 EMB Floor-Concealed Door Closers with Electromagnetic Hydraulic Hold Open Aesthetically Pleasing Floor Closer for Fire/Life
More informationSPECIALTY DOOR HARDWARE
SPECIALTY DOOR HARDWARE RICHARDS-WILCOX HARDWARE ADVANTAGES STANDARD OF THE INDUSTRY Manufacturing since 880 in Aurora, IL...most experience in the industry Standard capacities up to 5000 pounds...heaviest
More informationWARNING! DO NOT ATTEMPT TO INSTALL THIS KIT IN A POWERED CONVEYOR.
Model: Document Number: 64058111 Kit Number: 64058112 Revision: 02 Description: Release Date: 04/08 Introduction This kit allows a PS90 scale to be integrated into a standard gravity conveyor. The kit
More informationHürriyet Mah. Dr. Cemil Bengü Cad. No.27/A 34403 Çağlayan / Istanbul
Hürriyet Mah. Dr. Cemil Bengü Cad. No.27/A 34403 Çağlayan / Istanbul Tel: +9 0212 224 2392 +9 0212 225 2182 Faks:+9 0212 225 0274 Website: www.alaks.com.tr E-Mail: info@alaks.com.tr 1160F Aluminum Corner
More informationBOQ SPECIFICATIONS. The Blind system consist of a coated aluminium tube of 38 mm diameter with provision of fabric clamping.
BOQ SPECIFICATIONS VERTICAL BLINDS Vertical Blinds made of glass fibre fabrics in width 5 (or 4 ). Minimum overlapping of ¾ in fabric. Top aluminium anodized rail of 1.4 mm thickness. 2 inch wide channel
More informationBUILDINGA 1/10 SCALE FLATBED TRAILER
VOLUME 1, ISSUE 1 BUILDINGA 1/10 SCALE FLATBED TRAILER BUILT, DESIGNED & WRITTEN BY NATHAN MYERS MATERIALS: FEATURES: While the design was kept simple to allow anyone to be able to build their own trailer,
More informationInstallation Instructions
READ BEFORE INSTALLING UNIT For Through-the-Wall Air Conditioners To avoid risk of personal injury, property damage, or product damage due to the weight of this device and sharp edges that may be exposed:
More informationRose Door Handles. We take the worry out of protecting what s valuable to you. Lockwood: no worries. www.lockweb.com.au
Rose Door Handles We take the worry out of protecting what s valuable to you. Lockwood: no worries www.lockweb.com.au Contents Robert Watson Series 20 Symphony Series 1420 Symphony Series 1360 Series Door
More informationWood Sound Retardant Door Hardware Information Bulletin
overly overly 574 West Otterman Street Greensburg, PA 15601 Toll Free: (800) 979-7300 Local: (724) 834-7300 Fax: (724) 830-2871 Email: overly@overly.com DOOR COMPANY Wood Sound Retardant Door Hardware
More informationNarrow stile lock 1314
3 2 4 6 6 1 3 2 4 4 5 3 2 4 3 5.... ( (. ). ) 11 12 5 3 5 4 8 1 6 20 8.5 6.5 19 Backset 15 3 5 2 1 5 2 5 5 0 8 9 2 8 1 1 21-1mm 12 8 24 1 6 8 1 ( 9 2 5 ) ) ). ) Narrow stile lock 1314 CE EN 12209 2 4 5
More information2.02. Specifications. General. Products. Execution. Offset Pivots P-694 Top and Bottom Pivots
2.02 Standard Specifications General Entrances Description Furnish all necessary materials, labor and equipment for the complete installation of aluminum entrance doors, door frames and hardware as shown
More informationCHARISMA SHOWER/TUB DOOR INSTALLATION INSTRUCTIONS
CHARISMA SHOWER/TUB DOOR INSTALLATION INSTRUCTIONS IMPORTANT DreamLine reserves the right to alter, modify or redesign products at any time without prior notice. For the latest up-to-date technical drawings,
More information2. The Laboratory Fume Hood Specification Catalog Select the style and size hoods appropriate for your layout and laboratory use.
TABLE OF CONTENTS How to Specify... 3 Introduction to Fisher Hamilton Stainless Steel Laboratory Casework... 4 5 Stainless Steel Casework Options Menu... 6 Base Cabinets... 7 17 Sitting Height Cabinets...
More information