RACK MONITORING SYSTEM

Transcription

1 CONTEG DATA SHEET version: COMPLEMENTARY SYSTEMS RACK MONITORING SYSTEM CONTEG, spol. s r.o. Headquarters Czech Republic: Na Vítězné pláni 79/ Prague 4 Tel.: Fax: conteg@conteg.com Local Branches/Offices: Austria: Benelux: Eastern Europe / Nordics: France, Maghreb: Germany / Switzerland / Baltics / Denmark / Italy: Middle East: Russia, CIS: Slovakia:

2 RACK MONITORING SYSTEM - RAMOS Ultra RAMOS Ultra is an excellent solution for server rooms and data centres, where is required more than 8 sensors and up to 500 sensors using expanders. Using expanders it is possible to create wide monitoring network. It is great for any design, where sensors mapping and GSM gateway are required without external software/application. RAMOS Ultra uses a Linux Operating System. It is TCP / IP compliant and runs Lighttpd web server including https (SSL), Bash, Perl, Telnet, PHP, and Nagios. RAMOS Ultra has an easy-to-use web-based user interface for sensor configuration, data collection and extensive graphing. Complete SNMP functions such as including SNMP v encryption are supported. RAMOS Ultra also supports Modbus Master / Slave, Modbus RTU and Modbus over TCP / IP creating a unique, easy to configure Modbus to SNMP gateway. The web-based interface is written in PHP allowing the end-user changes such as language translation. RAMOS Ultra has a battery backed time of day clock for accurate record keeping. RAMOS Ultra can record all events in its database with a time stamp of when the sensor alarm was raised and the action took place. A standalone product with no external software dependencies, RAMOS Ultra gives you the very best for your monitoring needs. It has 8 auto-sense intelligent sensor ports which work with a wide range of RAMOS intelligent sensors. It can use any combination of sensors to monitor temperature, humidity, water leakage, airflow, security and even control relays. RAMOS sensors can also be used to detect AC voltage and measure DC voltage. Our sensors include an integrated data collection and graphing package to spot trends in the airflow, temperature and humidity. RAMOS ULTRA FEATURES: Monitors up to 500 intelligent sensors using expansion modules (RAMOS ULTRA-EX-O6 and RAMOS ULTRA-EX-I8) Each intelligent Sensor port can be set to be input or output Compatible with complete range of RAMOS Intelligent Sensors All Ramos Ultra accessories are powered from monitoring device Built-in notification features and SNMP traps Receive notifications of anomalous events via , SMS / MMS, SNMP traps, and many more. Integrates with network management systems via SNMPv and Encrypted SNMPv. Fully embedded TCP/IP and web-server Network Management System integration Login for User and Administrator for better security Virtual Sensors monitor power, Modbus, network devices, and other SNMP based equipment. Built-in graphing and data logging, internally or to a remote PC. Sensors/detectors can be added to the uploaded picture/map for better and quick locating. The web-based interface is written in PHP allowing end-user changes such as language translation. Independent Platform; free firmware upgrades and utilities from Conteg. Internal Linux Web-based interface for easy configuration and monitoring Battery backed clock for an accurate system date and time Stream sensor information directly to your mobile phone or PDA. Ability to connect external GPRS / GSM modem, Bluetooth and WiFi USB adapters. Full Modbus support : Modbus Master / Slave, Modbus RTU, Modbus over TCP / IP :: rack monitoring system RAMOS (RAck MOnitoring System) is designed to be deployed within a rack to monitor its internal and external environment. As a network attached device, RAMOS can report the status of sensors deployed in and around racks to any location worldwide; and using SNMP traps it can integrate with any network management software.

3 RAMOS ULTRA - REAR VIEW RAMOS ULTRA - FRONT VIEW ) 7,5 V DC power input ) 8 Intelligent sensor ports (RJ-45) ) Standard 0/00 Base-T Ethernet 4) USB port.0 for GSM/GPRS, Bluetooth or Wi-Fi adapter 5) Modbus connectivity RS485 6) Reset button 7) Output from int. microphone 8) Input for ext. microphone and output for ext. speaker 9) External ground 0) 4x expansion ports ) Internal microphone ) Power indicating LED ) Activity / link indicating LED 4)6 LED s indicating online status and network activity Max. cable length 00m FRONT PANEL REAR PANEL FRONT PANEL REAR PANEL TOP VIEW SIDE VIEW RAMOS ULTRA-EX-O6 The RAMOS Ultra Expander O6 is an expansion board that adds 6 opto isolated dry contact inputs to the RAMOS ULTRA. The EX-O6 can be connected to any of the 4 RJ-45 expansion ports located on the front panel of the RAMOS ULTRA unit using standard Cat.5 LAN cable. The EX-O6 may also be daisy-chained using the E-Out/E-In ports on other expansion boards. A typical use of the EX-O6 would be to connect the outputs of an alarm panel to each of the 6 dry contact inputs allowing the RAMOS ULTRA s full featured built in notification system to be integrated into these alarm panels, or other systems that output a voltage. Maximal length of the cable (LAN Cat.5/6) for connection between expander/ramos or between expanders is 00m. Quantities of the expanders are unlimited. RAMOS ULTRA-EX-I8 The RAMOS Ultra Expander Intelligent port 8 is an expansion board that adds 8 intelligent ports (In/Out) to the RAMOS ULTRA. The EX-I8 can be connected to any of the 4 RJ-45 expansion ports located on the front panel of the RAMOS ULTRA unit using standard Cat.5 LAN cable. The EX-I8 may also be daisy-chained using the E-Out/E-In ports on other expansion boards. Any intelligent sensor/detector to the intelligent port (RJ-45). Maximal length of cable (Cat.5/6 LAN) for connection between expander/ramos or between expanders is 00m. Quantities of the expanders are unlimited. RAMOS ULTRA-EX-D8-8 The RAMOS Ultra Expander D8-8 is an expansion board that adds 8 dry contacts (IN/OUT) to one intelligent port (RJ-45) in the RAMOS ULTRA or RAMOS ULTRA-EX-I8 (up to 64 dry contacts per unit). The EX-D8-8 can be connected to any of the intelligent ports located on the rear side of devices. Each dry contact can be configured as input or output (up to 0mA) and the EX-D8-8 is user definable so it can be used to detect many different inputs such as UPS status, security systems, alarm panels or air conditioning status. Expander is powered by the RAMOS ULTRA or RAMOS ULTRA-EX-I8. Maximal length of the cable (Cat.5/6 LAN) for connection is 00m.

4 TECHNICAL INFORMATION: RAMOS ULTRA RAMOS ULTRA-EX-O6 Size: 6 x 8 x 46 mm Voltage: 7 9 VDC, Amp Typical Power Consumption: 5,05 Watt, 0,67A Weight: kg RAMOS ULTRA-EX-I8 Size: 6 x 8 x 46 mm Voltage: 7 9 VDC, Amp Typical Power Consumption: 6,50 Watt, 0,8A Weight: 0.8 kg Size: 6 x 8 x 46 mm Voltage: 7 9 VDC, Amp Typical Power Consumption: 6,50 Watt, 0,8A Weight: 0.8 kg Rack monitoring system Code Description Monitoring device RAMOS Ultra; 8 Intelligent ports (In/Out); 4 expansion ports on front panel; Modbus (RS-485); USB.0 for connection GSM, Bluetooth or Wi-Fi adapter; power adapter with power cord; crossover patch cord cable,5m length; U high bracket with screws and installation CD RAMOS ULTRA Expander - add 6 Opto Isolated Dry contact Inputs; daisy chain connection; power adapter with power cord; U high bracket with screws and LAN cable,5m RAMOS ULTRA Expander - add 8 Intelligent Sensor (In/Out); daisy chain connection; power adapter with power cord; U high bracket with screws and LAN cable,5m Expander for intelligent port - digital adaptor adds 8 dry contacts - via 8x pins RAMOS ULTRA RAMOS ULTRA-EX-O6 RAMOS ULTRA-EX-I8 RAMOS ULTRA-EX-D8-8 Intelligent Accessories for RAMOS Ultra Code Description RMS-I-ST Temperature sensor with 0cm cable (coupler RJ-45 included) RMS-I-STH One wire temperature and humidity sensor with 0cm cable (coupler RJ-45 included) RMS-I-VC 4-0mA Converter with,5m cable RMS-I-AS Siren & Strobe light with,5m cable RMS-I-AF Airflow sensor with,5m cable RMS-I-DE-0 Smoke detector with,5m cable RMS-I-DE-0 PIR motion detector with add,5m cable RMS-I-DE-04 Spot water sensor with 4,5m cable RMS-I-DE-06 Rope water sensor with m length detection cable and connection cable,5m RMS-I-MK Magnetic door contact with 4,5m cable RMS-I-DRC Dry contact with 4,5m cable RMS-I-PWR-NO AC-Sensor controlled relay normally open (0V/0V) RMS-U-DST Daisy-chain temperature sensor with,5m cable, RSM-U-GSM USB Modem with audio cable (Quad - band) RMS-I-CON Coupler CAT.5e RJ45-RJ45 for sensor cable extension, pack 0 pcs can be extended by LAN cable (Cat. 5e/6) can be extended by LAN cable (Cat. 5e/6) and coupler with RJ-45 connection accessories for RAMOS Ultra only Accessories: 4 RMS-I-ST Temperature sensor with 0cm cable. Semiconductor, microprocessor controlled type of the temperature sensor. Autosense sensor. The Cable can be extended up to 00m (Cat.5/6 LAN) RMS-I-STH One wire temperature and humidity sensor with 0cm cable length. Up to 8 dual sensors can be connected in device with 8 intelligent ports. Humidity range 0 00%. RMS-I-VC 4-0mA Converter with attached LAN cable (Cat. 5),5m. Converter can collect the analog values from a wide array of sensors.

5 RMS-I-AS RMS-I-AF RMS-I-DE-0 RMS-I-DE-0 RMS-I-DE-04 Siren & Strobe light with attached LAN cable (Cat. 5),5m. 00db Siren sound and flashing strobe interval is 400x per minute. Cable can by extended up to 0m (cat.5/6 LAN) Airflow sensor with attached LAN cable (Cat. 5),5m. Airflow data graphically displayed over time. On/off alarm signal of airflow. Smoke detector with attached LAN cable (Cat. 5),5m. On/Off alarm signal of Smoke Detector. With 9V battery as backup, RAMOS will still work as a smoke detector on its own. The smoke detector can also be attached to dry contacts of the expanders. PIR motion detector with attached LAN cable (Cat. 5),5m. Can be connected in chain up to 0 Motion Detector Sensors on a single port. 60 detection angle. Spot water sensor with 4,5m cable. Maximum cable extension is 50m. It is able to measure distilled water. RMS-I-DE-06 Rope water sensor with m length detection cable and 6m non-detection cable. Attached LAN cable (Cat. 5),5m. Maximum extension cable run length is 0m. Protects water sensitive equipment from potential disaster. This product detects battery Acid for short term exposure. RMS-I-MK Magnetic door contact with 4,5m cable. Maximum extension cable length 00m. Open/closed contact switch. RMS-I-DRC Dry contact with 4,5m cable. It can be input or output. When used as an output it can supply to 0 ma. Input voltage range is 0 to 5V. Open/Closed contact switch sensor. AC-Sensor controlled relay normally open (0V/0V). Attached LAN cable (Cat. 5),5m. Maximum LAN cable is 0m. RMS-I-PWR-NO Build in 0A Fuse. C and C4 socket connection. Switch can by controlled be any sensor. 5 RMS-U-DST Daisy-chain temperature sensor with attached LAN cable (Cat. 5),5m. Up to 8 sensors can by connected to single intelligent sensor port in 50m total cable length. It can be connected to the RAMOS ULTRA main monitoring device only RMS-U-GSM USB Modem (Quad- band) with audio cable for connection to RAMOS ULTRA. RMS-I-CON Coupler CAT.5e RJ45-RJ45 for sensor cable extension, pack 0 pcs