82357B GPIB-USB Controller instructions

Size: px

Start display at page:

Download "82357B GPIB-USB Controller instructions"

Lisa Lawson
7 years ago
Views:

1 82357B GPIB-USB Controller instructions 1. USB/GPIB Controller instructions 1) Fully compatible GPIB-USB controller Agilent 82357A, 82357B 2) Agilent Agilent IO Libraries15.5 drive 3) To a laptop or desktop USB port and direct connection between GPIB instruments. Plug and Play 4) Through the USB port powered, no external power supply 5) Compatible with USB 1.1 and USB ) 488.1/488.2 compatible interface (can be connected up to 14 GPIB instruments). 7) without Instruments GPIB cable can be connected 8) support, such as LABVIEW programming and generic programming in VC + + and other programming tools. 2. Parts list GPIB-USB controller X 1 USB cable X 1 Driver CD X 1 Including: Agilent IO Libraries15.5

2 DEMO program and source code Manual 3. Installation and use instructions 3.1 Install Agilent IO Libraries15.5 Insert the driver CD, install the Agilent IO Libraries15.5 program prompted the installer. Figure 1 Install Agilent IO Libraries Installed Agilent IO Libraries15.5 program, insert the 82357B GPIB-USB controller, the system detects the controller and automatically install the driver, the driver installation is complete, open the Control Panel's Device Manager can see already installed 82357B GPIB -USB controller hardware information. As shown below.

3 Figure 2 Device Manager 82357B GPIB-USB controller hardware information 3.2 GPIB-USB controller connected equipment GPIB-USB controller can be connected directly or via GPIB and instrument cable Figure 3 GPIB-USB controller connected a single instrument GPIB-USB controller via GPIB cable can be used with up to 14 instruments to communicate.

4 Figure 4 GPIB-USB controller to connect multiple instruments 3.3 GPIB-USB controller and communication equipment Run Agilent IO Control Figure 5 Run Agilent IO Control Run Agilent Connection Expert (can be started by double-clicking the taskbar icon ), the pop-up screen shown below, the interface displays information about GPIB-USB controller (such

5 as serial numbers, etc.). Figure 6 Agilent Connection Expert detected GPIB-USB Controller Information GPIB-USB controller detects connected devices and automatically return to the connected information equipment (including equipment manufacturer, model, serial number, firmware version, etc.). The following figure shows the GPIB controller detects the connection of two instruments.

6 Figure 7 Agilent Connection Expert detects the information of the connected equipment Note: When the equipment support SCPI command set, you can automatically return equipment information, otherwise, the instrument does not recognize the Agilent IO Control15.5 automatically send the * IDN? instruction, the corresponding position may appear garbled or crash phenomenon. At this point in the GPIB address can right-click and select change properties, the pop-up menu item Auto-identify this instrument can be removed in front of the check sent automatically ban * IDN? command functions. Agilent Connection Expert by sending commands to the instrument and receiving apparatus information. Right click to find the instrument, in pop-up menu, select send command to this instrument, then pop up the following interface. In the dialog, you can send equipment to support instruction, connecting the instrument to verify. For the return value of the instruction (instruction? end), according Send & Read button to send commands and return information from the instrument. Equipment to support instruction set of the equipment vendors in the operation manual or programming manual can find. Figure 8 Send commands to the instrument and receiving apparatus information 3.4 GPIB-USB controller in LABVIEW application First, run the LABVIEW tool. Settings "tool - NI-VISA-VISA Options "

7 勾选 NiVisaTulip.dll NI-VISA Passport USB 选项 The MAX by LABVIEW tools and instruments to communicate.

8 LABVIEW routines comes through to communicate with the instrument. 4. Appendix A: Installing Agilent IO Libraries15.5 the same time with the NI-VISA Agilent and NI because competition between companies, Agilent IO Libraries15.5 and NI-VISA

9 potential conflict will lead to a company's software, which can not function properly. If you want to install the software the companies, follow these steps: 1) First install the NI-VISA Software 2) NI-VISA installed, then install AIOL During installation, select Custom (Custom mode), and Agilent as Primary VISA entry to remove the check. After installation is completed as described above, Agilent IO Libraries15.5 and NI-VISA can run in the system.

Shearwater Research Dive Computer Software Manual

Shearwater Research Dive Computer Software Manual Revision 1.3 Table of Contents 1. Basic overview of components 2. O/S IrDA driver installation 2.1 USB IrDA installation for Windows XP Home/Pro editions