IVS-Basic 4.4 IVS-Professional 4.4 IVS-PowerPoint 1.1
|
|
- Maurice Lambert
- 8 years ago
- Views:
Transcription
1 Manual IVS-Basic 4.4 IVS-Professional 4.4 IVS-PowerPoint 1.1 Supplement connecting USB RF-II Base Station 1213
2 2
3 Contents Contents... 3 Connecting the RF-II Base Station to the USB port... 4 Using the preinstalled drivers... 5 Windows XP, Windows Server Windows Vista, Windows Server 2008 (R2), Windows 7, Windows 8, Windows Server 2012 (R2) and Windows Installing the drivers from the CD-ROM Windows XP Windows Server Windows Vista Windows Server Windows Windows Server 2008 R Windows Windows Server Windows Windows Server 2012 R
4 Connecting the RF-II Base Station to the USB port The latest version of the RF-II Base Station is equipped with a USB connection. This allows you to connect the RF-II Base Station to a USB port of your computer. This USB connection is only used to communicate with the Base Station. To power the Base Station, you must use the supplied external power supply. After connecting the RF-II Base Station to the USB port of your computer for the first time, you need to install the provided driver. This driver installs an additional COM port on your computer. This allows you to use a RF-II Base Station on computers that don t have a COM port of their own, like most of the new laptops. When installing the IVS-Basic, IVS-Professional or IVS-PowerPoint software, the necessary drivers are preinstalled on your computer. If you then connect an RF-II Base Station, Windows will automatically find these preinstalled drivers and install them for the connected RF-II Base Station. This installation will almost be fully automatic. If you connect the RF-II Base Station before having installed the software, you will have to install the necessary drivers from the installation CD-ROM. The way the drivers need to be installed differs per version of Windows. 4
5 Using the preinstalled drivers During the installation of IVS-Basic, IVS-Professional or IVS-PowerPoint, the drivers for the RF-II Base Station are preinstalled on your computer. After connecting an RF-II Base Station, Windows will automatically find these preinstalled drivers and install them for the connected RF-II Base Station. It is no longer necessary to keep the installation CD- ROM ready. The drivers are compatible with Windows XP and higher. Older operating systems are not supported. Depending on which operating system you use, you might be asked to give your permission for the installation of the drivers, during the installation of IVS-Basic, IVS- Professional or IVS-PowerPoint. Follow the instructions below for your version of Windows. Windows XP, Windows Server 2003 Both Windows XP and Windows Server 2003 display a warning when a driver does not comply with the Windows Logo-test. During the installation of the IVS software, this warning will be displayed twice. Your permission is required to continue with the installation. The software has not passed Windows Logo testing Click on the Continue Anyway button to continue with the installation of the drivers. If you click on the STOP Installation button, the driver will not be installed and the installation of the software will be cancelled. The question for giving your permission will be asked twice. It is important that you click on Continue anyway in both cases. If you do this only once, the installation of the software will be cancelled. 5
6 Connecting the Base Station After connecting the RF-II Base Station, the Found New Hardware Wizard will be started. If you have Windows XP with Service Pack 2 or 3, or Windows Server 2003 with Service Pack 1 or 2, Windows will first ask you if it can connect to Windows Update to look for the necessary drivers. The Found New Hardware Wizard wants to connect to Windows Update Select the option No, not this time and click on Next to continue. The Found New Hardware Wizard Windows is going to install the software automatically. Click on Next to continue. During the installation your permission to install the drivers is needed again. 6
7 The software has not passed Windows Logo testing Click on the Continue Anyway button to continue with the installation. The files that are needed for the driver are copied to your computer. After copying the files, Windows indicates that it has finished installing the software. Windows has finished installing the driver Click on Finish to close the wizard. Windows now notifies you that it has found additional new hardware. The Found New Hardware Wizard is started again. If you have Windows XP with Service Pack 2 or 3, or Windows Server 2003 with Service Pack 1 or 2, Windows will first ask you if it can connect to Windows Update to look for the necessary drivers. 7
8 The Found New Hardware Wizard wants to connect to Windows Update Select the option No, not this time and click on Next to continue. The Found New Hardware Wizard Windows is going to install the software automatically. Click on Next to continue. Again Windows needs your permission to continue. The software has not passed Windows Logo testing 8
9 Click on the Continue Anyway button to continue with the installation. The files that are needed for the driver are copied to your computer. After copying the files, Windows indicates that it has finished installing the software. Windows has finished installing the driver Click on Finish to close the wizard. The hardware is installed Windows notifies you that the hardware is installed and is ready to use. Windows Vista, Windows Server 2008 (R2), Windows 7, Windows 8, Windows Server 2012 (R2) and Windows 8.1 Windows Vista, Windows Server 2008, Windows 7, Windows Server 2008 R2, Windows 8, Windows Server 2012, Windows 8.1 and Windows Server 2012 R2 notify you of the fact that the driver was published by a publisher that isn t trusted yet. During the installation of the IVS software, you will be notified twice. Your permission is required to continue with the installation. 9
10 The publisher of this driver is not yet trusted Click on the Install button to continue with the installation of the drivers. If you click on the Don t Install button then the driver will not be installed and the installation of the software will be cancelled. You can click the Always trust software from Interactive Voting System bv. checkbox, so that Windows knows that this publisher can be trusted and it doesn t need to display this warning again. During the remaining part of the installation, and even while connecting the RF-II Base Station, you won t be notified anymore. On Windows 8.1 and Windows Server 2012 R2, this checkbox is checked by default. If you don t click on the Always trust software from Interactive Voting System bv. checkbox, you will be asked for your permission again. It is important that you click the Install button in both cases. If you were to do this only once, the installation of the software will be cancelled. Connecting the RF-II Base Station When you connect the RF-II Base Station, Windows will automatically install the preinstalled drivers for this RF-II Base Station. It will not ask you for your permission anymore. 10
11 Installing the drivers from the CD-ROM The drivers for the RF-II Base Station are on the CD-ROM that came with the system. The installation instructions differ for each version of Windows. Please follow the instructions below for your version of Windows. Windows XP The RF-II Base Station has to be connected to a USB port of your computer. Always use the USB cable that comes with the system. Connect the RF-II Base Station to the mains with the adaptor that comes with the system. When connected to the mains, the red LED in the front of the RF-II Base Station is burning. Windows notifies you that it has found new hardware. Windows has found new hardware Next, the Found New Hardware Wizard is started. If you have Windows XP with Service Pack 2 or 3, or Windows Server 2003 with Service Pack 1 or 2, Windows will first ask you if it can connect to Windows Update to look for the necessary drivers. The Found New Hardware Wizard wants to connect to Windows Update Select the option No, not this time and click on Next to continue. 11
12 The Found New Hardware Wizard Windows is going to install the software automatically. The driver for the RF-II Base Station is on the CD-ROM that came with the system. Make sure this CD-ROM is in the CD- ROM drive. Click on Next to continue. Windows has found a driver Windows has found a driver for the device IVS RF-II Base Station and is now ready to install that driver. The driver for the Base Station has not passed Windows Logo testing. This is why Windows notifies you and asks you whether you want to continue or stop the installation. 12
13 The software has not passed Windows Logo testing Click on Continue Anyway. The files that are needed for the driver are copied to your computer. After copying the files, Windows indicates that it has finished installing the software. Windows has finished installing the driver Click on Finish to close the wizard. Windows now notifies you that it has found additional new hardware. Windows has found more new hardware The Found New Hardware Wizard is started again. If you have Windows XP with Service Pack 2 or 3, or Windows Server 2003 with Service Pack 1 or 2, Windows will first ask you if it can connect to Windows Update to look for the necessary drivers. 13
14 The Found New Hardware Wizard wants to connect to Windows Update Select the option No, not this time and click on Next to continue. The Found New Hardware Wizard Windows is going to install the software automatically. The driver for the Base Station is on the CD-ROM that came with the system. Make sure this CD-ROM is in the CD-ROM drive. Click on Next to continue. 14
15 Windows has found a driver Windows has found a driver for the device USB Communications Port for RF-II Base Station and is now ready to install that driver. The driver for the USB Serial Port has not passed Windows Logo testing. This is why Windows notifies you and asks you whether you want to continue or stop the installation. The software has not passed Windows Logo testing Click on Continue Anyway. The files that are needed for the driver are copied to your computer. After copying the files, Windows indicates that it has finished installing the software. 15
16 Windows has finished installing the driver Click on Finish to close the wizard. Windows notifies you that the hardware is installed and is ready to use. The hardware is installed Start the IVS software and open the Communication Settings by selecting the option Settings from the Communication menu. Selecting the RF- II Base Station in the IVS software You can see that an extra COM port has been added, in this case COM3. The Base Station is connected to this COM port. Select RF-II Base Station on COM3 and click on Next to continue. You continue with the settings as described in the IVS software manual. 16
17 Windows Server 2003 If you have Windows Server 2003, you follow the steps as described for Windows XP. Windows Vista The RF-II Base Station has to be connected to the USB port of your computer. Always use the USB cable that comes with the system. Connect the RF-II Base Station to the mains with the adaptor that comes with the system. When connected to the mains, the red LED in the front of the RF-II Base Station is burning. Windows notifies you that it has found new hardware. Windows has found new hardware Next, the Found New Hardware Wizard is started. The Found New Hardware Wizard needs to install a driver Click on the Locate and install driver software (recommended) option to continue. If you don t have the necessary rights to install a driver, Windows will ask for your permission, or will ask for the credentials of another user that does have sufficient rights. Your permission is required to continue with the installation Click on Continue to give your permission and continue. 17
18 Windows will now automatically check with Windows Update to see if device driver software is available for this device. The drivers for the RF-II Base Station, however, are not available via Windows Update. Next, Windows will check to see if the device driver software is preinstalled. If this turns out to not be the case, Windows will ask you to insert the disc that came with the device. Windows asks you to insert the disc that came with the device and contains the necessary drivers If the CD-ROM is already in the CD-ROM player, click on Next to continue. If the disc was not yet inserted, Windows will wait until you insert it and then automatically continue with the next step. Windows searches the disc for the drivers When the drivers are found, Windows will start installing them. 18
19 The driver is being installed The driver was published by Interactive Voting System bv. Because this publisher is not yet trusted by Windows, a warning is displayed asking you if you are sure you want to install this driver. The publisher of this driver is not yet trusted You can click the Always trust software from Interactive Voting System bv. checkbox, so that Windows knows that this publisher can be trusted and it doesn t need to display this warning again. Click on Install to continue. Windows will continue with the installation of the drivers. 19
20 The driver is being installed When Windows has finished installing, it will tell you that the software for the device has been successfully installed. The installation of the driver was successful Click on the Close button to close the Wizard. Again, Windows notifies you that it has found new hardware. 20
21 Windows found more new hardware Click on Next to continue. Again, Windows will look for the driver on the disc and install it. If you didn t indicate that you trust the publisher Interactive Voting System bv, you will get another warning telling you that the publisher of the driver is not yet trusted. The publisher of this driver is not yet trusted Click on Install to continue. Windows will continue with the installation of the drivers. When Windows has finished installing, it will tell you that the software for the device has been successfully installed. 21
22 The installation of the driver was successful You can then click on the Close button to close the Wizard. Windows now notifies you that the device driver software was installed successfully and that the devices are ready for use. The devices are ready for use By clicking on this balloon, an overview of the installed devices is displayed. In this overview you can see on which COM port your RF-II Base Station was installed. An overview of the installed devices Click on Close to close this overview. Start the IVS software and open the Communication Settings by selecting the option Settings from the Communication menu. 22
23 Selecting the RF- II Base Station in the IVS software You can see that an extra COM port has been added, in this case COM3. The Base Station is connected to this COM port. Select RF-II Base Station on COM3 and click on Next to continue. You continue with the settings as described in the IVS software manual. Windows Server 2008 If you have Windows Server 2008, you follow the steps as described for Windows Vista. Windows 7 The RF-II Base Station has to be connected to the USB port of your computer. Always use the USB cable that comes with the system. Connect the RF-II Base Station to the mains with the adaptor that comes with the system. When connected to the mains, the red LED in the front of the RF-II Base Station is burning. Windows notifies you that it has found new hardware. Windows has found new hardware Windows will now automatically check with Windows Update to see if device driver software is available for this device. The drivers for the RF-II Base Station, however, are not available via Windows Update. Next, Windows will check to see if the device driver software is preinstalled. If this turns out to not be the case, Windows notifies you that the device driver software could not be installed. The device driver software could not be installed 23
24 Windows 7 does not automatically search for drivers on a CD-ROM, even though this CD-ROM had already been put in the CD-ROM player. You will have to install the device drivers manually. Click on the Windows Start button and type Device Manager in the Search programs and files edit box. Press Return to open the Device Manager window. Device Manager Under the Other devices category you see a device called IVSCCRF. This is the RF-II Base Station for which no device driver software has been installed. To install the device drivers, you double click on the IVSCCRF device. A window with the properties of this device is opened. 24
25 The properties of the IVSCCRF device To install the device driver software for this device, you click on the Update Driver button. A new window opens to ask you how you want to search for this driver. How do you want to search for driver software Click on the Browse my computer for driver software button to manually indicate where the drivers can be found. If you were to click on the Search automatically for updated driver software button, Windows would again check with Windows Update to see if driver software is available, or check for preinstalled drivers. This would again lead to a notification that Windows was unable to install the driver software. 25
26 Indicate the location where the driver software can be found The driver for the RF-II Base Station is on the CD-ROM that came with the system. Make sure that the CD-ROM is in the CD-ROM drive. Next, click on the Browse... button to indicate the location where the driver software can be found. They can be found in the IVS Drivers folder, which is in the Drivers folder on the CD-ROM. After having indicated the location, you click on Next to continue. Windows will now install the driver software. The driver software is being installed The driver was published by Interactive Voting System bv. Because this publisher is not yet trusted by Windows, a warning is displayed asking you if you are sure you want to install this driver. 26
27 The publisher of this driver is not yet trusted You can click the Always trust software from Interactive Voting System bv. checkbox, so that Windows knows that this publisher can be trusted and it doesn t need to display this warning again. Click on Install to continue. Windows will continue with the installation of the drivers. When Windows has finished installing, it will tell you that the software for the device has been successfully installed. The installation of the driver was successful Click on the Close button to close the wizard. In the IVS RF-II Base Station properties window you can see that the device is now working properly. 27
28 The device is now working properly, after the installation of the driver software Click on Close to close this window. In the meantime, Windows has notified you that it found another device, and that the device driver software for this device also failed to install. If you look at the Device Manager window, you can see that another device called USB Serial Port appeared under the Other devices category. The device drivers for this device also need to be installed manually. To do this, you double-click on the USB Serial Port device, after which a window with the properties of this devices opens up. The properties of the USB Serial Port device To install the device driver software for this device, you click on the Update Driver button. Again, a new window opens to ask you how you want to search for this driver. 28
29 How do you want to search for driver software Click on the Browse my computer for driver software button to manually indicate where the drivers can be found. A new window opens up in which you can indicate the location of the driver. The last used location is already filled in. The location of the driver software is already filled in This is also the location where the device drivers for the USB Serial Port can be found. You now just click on the Next button to continue. Windows will now install the driver software. 29
30 The driver software is being installed If you didn t indicate that you trust the publisher Interactive Voting System bv, you will again receive a warning message telling you that the publisher of the driver is not yet trusted. The publisher of this driver is not yet trusted Click on Install to continue. Windows will continue with the installation of the drivers. When Windows has finished installing, it will tell you that the software for the device has been successfully installed. 30
31 The installation of the driver was successful Click on the Close button to close the wizard. In the USB Communications Port for RF-II Base Station (COM3) properties window you can see that the device is now working properly. The device is now working properly, after the installation of the driver software Click on Close to close this window. If you look at the Device Manager window, you see that the device you just installed now appears under the Ports (COM & LPT) category, and is now called USB Communications Port for RF-II Base Station (COM3). Behind the device name, the COM port on which your RF-II Base Station is installed, is indicated between brackets. 31
32 In the Device Manager you can see on which COM port your Base Station is installed You can close the Device Manager by clicking on the red cross. Start the IVS software and open the Communication Settings by selecting the option Settings from the Communication menu. Selecting the RF- II Base Station in the IVS software You can see that an extra COM port has been added, in this case COM3. The RF-II Base Station is connected to this COM port. Select RF-II Base Station on COM3 and click on Next to continue. You continue with the settings as described in the manual for the IVS software. 32
33 Windows Server 2008 R2 If you have Windows Server 2008 R2, you follow the steps as described for Windows 7. Windows 8 The RF-II Base Station has to be connected to the USB port of your computer. Always use the USB cable that comes with the system. Connect the RF-II Base Station to the mains with the adaptor that comes with the system. When connected to the mains, the red LED in the front of the RF-II Base Station is burning. When you are in the Windows 8 Start Screen, you won t see any notifications. When you are on the Windows 8 Desktop, you will see a button appear in the Windows taskbar that indicates the installation progress. If you click on this button, the Device Setup window appears. Windows is going to install a device driver Windows will now automatically check with Windows Update to see if device driver software is available for this device. The drivers for the RF-II Base Station, however, are not available via Windows Update. Next, Windows will check to see if the device driver software is preinstalled. If this turns out to not be the case, the window will disappear. Windows does not notify you whether the installation was successful or not. Windows 8 does not automatically search for drivers on a CD-ROM, even though this CD-ROM had already been put in the CD-ROM player. You will have to install the device drivers manually. On the Start screen you type Device Manager. A search window appears while you are typing. Click on Settings. 33
34 The search window shows all locations containing the word Device Manager At the top left corner, click on Device Manager. Starting the Device Manager The Device Manager window appears. 34
35 Device Manager Under the Other devices category you see a device called IVSCCRF. This is the RF-II Base Station for which no device driver software has been installed. To install the device drivers, you double click on the IVSCCRF device. A window with the properties of this device is opened. From here, you follow the steps as describes for Windows 7, starting at page 25. Windows Server 2012 If you have Windows Server 2012, you follow the steps as described for Windows 8. Windows 8.1 The RF-II Base Station has to be connected to the USB port of your computer. Always use the USB cable that comes with the system. Connect the RF-II Base Station to the mains with the adaptor that comes with the system. When connected to the mains, the red LED in the front of the RF-II Base Station is burning. When you are in the Windows 8 Start Screen, you won t see any notifications. When you are on the Windows 8 Desktop, you will see a button appear in the Windows taskbar that indicates the installation progress. If you click on this button, the Device Setup window appears. 35
36 Windows is going to install a device driver Windows will now automatically check with Windows Update to see if device driver software is available for this device. The drivers for the RF-II Base Station, however, are not available via Windows Update. Next, Windows will check to see if the device driver software is preinstalled. If this turns out to not be the case, the window will disappear. Windows does not notify you whether the installation was successful or not. Windows 8.1 does not automatically search for drivers on a CD-ROM, even though this CD-ROM had already been put in the CD-ROM player. You will have to install the device drivers manually. On the Start screen you type Device Manager. A search window appears while you are typing. 36
37 The search window shows all locations containing the word Device Manager In the search window, click on Device Manager. The Device Manager window appears. Device Manager Under the Other devices category you see a device called IVSCCRF. This is the RF-II Base Station for which no device driver software has been installed. To install the device drivers, you double click on the IVSCCRF device. A window with the properties of this device is opened. 37
38 From here, you follow the steps as describes for Windows 7, starting at page 26. Windows Server 2012 R2 If you have Windows Server 2012 R2, you follow the steps as described for Windows
39 39
40
Installation Instructions for 9555 USB Driver
Prior to using the data modem features of your 9555 handset; you must first install the VCOMPORT 9555 USB Driver. This driver is compatible with: Windows XP Service Pack 2, Windows 2000 Service Pack 4,
More informationTitle: ZOLL USB Direct Connect Cable Installation Instructions
ZOLL USB Direct Connect Cable Installation Instructions Document Status: Released Document #: 48x126-ZOLL-003 Page 1 of 7 Revision History DATE REV REASON January 9, 2008 A Initial Release August 12, 2008
More informationInstalling the Driver of your Plotter- / Engraver
Installing the Driver of your Plotter- / Engraver By installing your plotter / engraver software the driver for your device will be pre-installed. When the device is switched on after the software setup,
More informationImportant Note Regarding Your Blu ray Drives
Important Note Regarding Your Blu ray Drives Use these supplemental instructions to complete the setup of your unit Your Disc Publisher unit uses esata to connect the Blu-ray drive(s) to the computer.
More informationUSA MOBILITY CABLE CONNECTION AND SOFTWARE DRIVER INSTALLATION INSTRUCTIONS. For. Unication M90 Device USB To RS232 Adapter TABLE OF CONTENTS
USA MOBILITY CABLE CONNECTION AND SOFTWARE DRIVER INSTALLATION INSTRUCTIONS For Unication M90 Device USB To RS232 Adapter TABLE OF CONTENTS SECTION 1: ADAPTER CABLE CONNECTION INSTRUCTIONS... 2 SECTION
More informatione-dpp 4.0.2 May 2013 Quick Installation Guide Microsoft Windows 2003 Server, XP, Vista, 7 Access Database
e-dpp 4.0.2 May 2013 Microsoft Windows 2003 Server, XP, Vista, 7 Access Database ELTECHS Engineering and Consulting Co., Ltd., Japan www.eltechs.co.jp Tel No. +81 (47) 490-1010 Fax No. +81 (47) 490-1011
More informationUSB Driver Installation for Windows XP
USB Driver Installation for Windows XP USB Serial Converter Driver Installation for Windows XP CAUTION: You must use the drivers on the CD-ROM supplied with your USB Device. DO NOT download drivers from
More informationScanShell.Net Install Guide
ScanShell.Net Install Guide Please install the software first - DO NOT PLUG IN THE SCANNER The scanner has been carefully packaged to avoid damage during transportation. Before operating the scanner, please
More informationSelect Correct USB Driver
Select Correct USB Driver Windows often installs updated drivers automatically, and defaults to this latest version. Not all of these drivers are compatible with our software. If you are experiencing communications
More informationENPS-MF1. 1 USB Port. Multifunctional Print Server. Quick Installation Guide V1.0
ENPS-MF1 1 USB Port Multifunctional Print Server V1.0 Specifications or features are subject to change without prior notice. All brand names or trademarks are the property of their respective owners. Packing
More informationMidland BT Updater BTUpdater Program Program file (x86) ), Midland
Midland BT Updater After you downloaded the BT Updater setup application from the web site, double click on it and follow the installation procedure. The BTUpdater application is automatically installed
More informationGuide to Installing BBL Crystal MIND on Windows 7
Guide to Installing BBL Crystal MIND on Windows 7 Introduction The BBL Crystal MIND software can not be directly installed on the Microsoft Windows 7 platform, however it can be installed and run via XP
More informationInstalling the Gerber P2C Plotter USB Driver
Installing the Gerber P2C Plotter USB Driver 1 You can install a Gerber P2C plotter using a USB connection and communicate with it using compatible design software. The following procedures describe installing
More informationScanWin Installation and Windows 7-64 bit operating system
ScanWin Installation and Windows 7-64 bit operating system In order to run the ScanWin Pro install and program on Windows 7 64 bit operating system you need to install a Virtual PC and then install a valid,
More informationUpgrading Your PhoneTree Software
Upgrading Your PhoneTree Software For PhoneTree 2100/2500/3500, VoiceWave Series, Patient/Dental/Veterinary Messaging, and HealthWave models upgrading from 6.12.80 or older to 6.13 or newer Question: How
More informationSage Peachtree Installation Instructions
Sage Peachtree Installation Instructions Quick Tips for Network Install Use the following tips to help you install Sage Peachtree on a network: Always install Sage Peachtree FIRST on the computer that
More informationVmed QUICKSTART PC-DISPLAY INSTALLATION & PC-Display and Bluetooth Instructions
QUICKSTART PC-DISPLAY INSTALLATION & BLUETOOTH SETUP INSTRUCTIONS Vmed PC-Display and Bluetooth Instructions This is the Quick Start manual for PC-Display software. The complete software user manual for
More informationNOTE: PLEASE DO NOT ATTEMPT TO INSTALL THE SOFTWARE BEFORE READING THIS DOCUMENT.
INLINE 5 Software INSTALL BULLETIN Page 2: Installing INLINE 5 Page 6: Removing INLINE 5 NOTE: PLEASE DO NOT ATTEMPT TO INSTALL THE SOFTWARE BEFORE READING THIS DOCUMENT. IMPROPER INSTALLATION OR USE CAN
More informationCANON FAX L360 SOFTWARE MANUAL
CANON FAX L360 SOFTWARE MANUAL Before You Begin the Installation: a Checklist 2 To ensure a smooth and successful installation, take some time before you begin to plan and prepare for the installation
More informationSupplemental USB Driver Installation Guide
Windows 2000/XP/Vista/7 Installation Supplemental USB Driver Installation Guide 1) Do not plug in your Auterra USB OBD Adapter until after the driver is installed. 2) The USB driver is located on the your
More informationCenturion PLUS CPC4 Download Guide
Centurion PLUS CPC4 Download Guide using C4 File Transfer Utility. 1010537 03 01 10 Section 50 1.0 Background: 1.1 The Centurion PLUS Control system consists of a Centurion PLUS Core (CPC4 1) and Color
More informationPIGCHAMP MOBILE. PigCHAMP Knowledge Software. Installation Guide for Mobile Units
PIGCHAMP MOBILE PigCHAMP Knowledge Software Installation Guide for Mobile Units Table of Contents: Important Note:... 4 Chapter 1: PC Setup... 5 A. Install PigCHAMP Mobile Manager on Windows XP...5 B.
More informationUSB DRIVER INSTALLATION GUIDE
USB DRIVER INSTALLATION GUIDE Use these instructions to install the USB drivers and Microsoft synchronization software for your Pathfinder 6057 printer. You need these utilities for your printer and computer
More informationInstallation of the USB to RS 485 Converter
Installation of the USB to RS 485 Converter Contents CONTENTS 1 GENERAL INSTRUCTIONS 1 HINT 1 INSTALLATION USING SETUP EXECUTABLE (RECOMMENDED INSTALLATION PROCEDURE) 2 INSTALLATION BY PLUGGING IN THE
More informationChapter 1 Downloading Images to Your Computer (Windows)
Software User Guide For the safe use of your camera, be sure to read the Safety Precautions thoroughly before use. Types of software installed on your computer varies depending on the method of installation
More informationHow to install USB driver (MICRO/I)
How to install USB driver (MICRO/I) HG2G-5S 1. The HG2G-5S USB driver installation wizard will start when Automation Organizer installation is complete. Click the Next button. 2. Read the license agreement
More informationUSB DRIVER INSTALLATION GUIDE
USB DRIVER INSTALLATION GUIDE Use these instructions to install the USB and Microsoft ActiveSync synchronization software for your Monarch Pathfinder Ultra Platinum 6039 printer and computer to communicate.
More informationInstalling the Driver of your Plotter- / Engraver
Installing the Driver of your Plotter- / Engraver By executing the supplied setup program the driver for your device will be pre-installed. When the device is switched on after the software setup, Windows
More informationUSB Driver. Installation Manual
USB Driver Installation Manual Issue 1.00 Detailed guide for the installation of Actisense USB Drivers under the following operating systems: Windows XP / 2000 Windows Vista USB Driver Installation Manual
More informationInstaller Assistance Windows XP
GearBox/TonePort Setup Installer Assistance Windows XP Welcome to the GearBox installation assistance document. This installation process will install the GearBox software, and optionally, device drivers
More informationPCLinq2 Hi-Speed USB Bridge-Network Cable. Quick Network Setup Guide
PCLinq2 Hi-Speed USB Bridge-Network Cable Congratulations! Quick Network Setup Guide For Windows 98/ME/2000/XP Congratulations for installing the PCLinq2 Hi-Speed USB Bridge-Network Cable. This Quick Network
More informationSAPIP GUI INSTALLATION. Table of Contents
QUICK START GUIDE SAPIP GUI INSTALLATION Table of Contents 1. Install CSU cable driver for SapIP..2-3 2. Check for pre-requisite for SAPIP GUI install......2 3. Check for pre-requisite for SAPIP GUI install...2-6
More informationInstalling PowerLink on Windows 7 64-bit
Instruction Manual Version 1.0, Code No. 20 751 806 1 Introduction... 3 2 Installing Virtual PC... 3 3 Configuring Windows XP Mode... 5 4 Installing Powerlink to Virtual XP... 8 5 Run PowerLink software
More informationIridium Extreme TM Satellite Phone. Data Services Manual
Iridium Extreme TM Satellite Phone Data Services Manual Table of Contents 1 OVERVIEW... 1 2 HOW IT WORKS... 1 3 BEFORE INSTALLING... 2 4 USB DRIVER INSTALLATION... 3 5 MODEM INSTALLATION AND CONFIGURATION...
More informationInstructions for Installing and Using the FOCUS DL-15 Data Transfer Software
27 March 2015 Instructions for Installing and Using the FOCUS DL-15 Data Transfer Software Introduction This guide will walk you through the process of transferring data from the FOCUS DL-15 to the computer
More informationUse your mobile phone as Modem. Intel Easy Steps 1 2012 Intel Corporation All rights reserved.
Use your mobile phone as Modem Intel Easy Steps 1 2012 Intel Corporation Mobile phone as Modem Use your mobile phone as Modem In order to connect your computer to the internet you need to use the services
More informationLong-Range 500mW IEEE 802.11g Wireless USB Adapter. User's Guide
Long-Range 500mW IEEE 802.11g Wireless USB Adapter User's Guide TABLE OF CONTENTS OVERVIEW... 4 UNPACKING INFORMATION... 4 INTRODUCTION TO THE IEEE 802.11G WIRELESS USB ADAPTER... 5 Key Features...5 INSTALLATION
More informationDIGITAL MULTIFUNCTIONAL SYSTEM
MODEL: MX-M283N MX-M363N MX-M453N MX-M503N DIGITAL MULTIFUNCTIONAL SYSTEM Software Setup Guide BEFORE INSTALLING THE SOFTWARE SETUP IN A WINDOWS ENVIRONMENT SETUP IN A MACINTOSH ENVIRONMENT TROUBLESHOOTING
More informationConnecting your Omega/BetaPAT PLUS to a PC via a USB
Connecting your Omega/BetaPAT PLUS to a PC via a USB Install software Windows XP and below Insert the disc into your computers disc drive and run through the setup wizard. Windows Vista & 7 1. Insert the
More informationCMP-102U. Quick Installation Guide
CMP-102U Quick Installation Guide V1.0 http://www.cnet.com.tw 1 CMP-102U Supports One High-speed USB2.0 Port MFP Server Supports 10/100Mbps Fast Ethernet Network Quick Installation Guide 1 Package Contents:
More informationTube-U(G) Long-Range Outdoor IEEE 802.11g USB Adapter User s Guide
Tube-U(G) Long-Range Outdoor IEEE 802.11g USB Adapter User s Guide Alfa Network, Inc. Page 1 Table of Content Over view... 3 Unpacking information... 3 Introduction to the Tube-U(G) outdoor USB Adapter...
More informationThe FlexiSchools Online Order Management System Installation Guide
The FlexiSchools Online Order Management System Installation Guide FlexiSchools May 2012 Page 1 of 18 Installation Pack Welcome to the FlexiSchools system. You will have received a disc containing: Sato
More informationVerbatim Secure Data USB Drive. User Guide. User Guide Version 2.0 All rights reserved
Verbatim Secure Data USB Drive User Guide User Guide Version 2.0 All rights reserved Table of Contents Table of Contents... 2 1. Introduction to Verbatim Secure Data USB Drive... 3 2. System Requirements...
More informationRunning the R4 Software on a USB Port
Tech Note Running the R4 Software on a USB Port Like a lot of other engine management software programs that have been around for a while, the R4 program is designed to communicate through a 9-pin serial
More informationAIM SOFTWARE AND USB DRIVER INSTALLATION PROCEDURE
AIM SOFTWARE AND USB DRIVER INSTALLATION PROCEDURE CONTENTS AIM software and USB Driver installation Chapter 1 Installing AIM software and AIM USB driver... 2 Chapter 2 Installation under Microsoft Windows
More informationSection 5: Connecting the Laser to Your Computer
Section 5: Connecting the Laser to Your Computer In This Section Connecting the Laser to your Computer USB Port Ethernet Port Connecting the Laser to Your Computer All Epilog systems are designed to be
More informationGERBER EDGE USB-to-Parallel Option Kit
GERBER EDGE USB-to-Parallel Option Kit 1 of 9 The USB-to-Parallel Option kit is a possible solution to connect your GERBER EDGE or EDGE 2 to OMEGA 2.5 or higher using a custom USB-to-Parallel cable. Note:
More informationOmni 56K USB Lite Quick Start Guide
Omni 56K USB Lite Quick Start Guide ZyXEL TOTAL INTERNET ACCESS SOLUTION 1. Hardware Installation Connect your modem to your analog phone or fax. Use the phone cord included to connect to the phone jack
More informationHow to install USB driver (MICRO/I)
How to install USB driver (MICRO/I) Install on Windows XP 1. Connect the USB port on HG3G series and the USB port on PC. 2. Windows displays Found new Hardware Wizard. Select No, not this time and press
More informationElo 1725L 17 Touch Screen Monitor Installation Guide. Product Name: Elo 1725L 17- inch Monitor
Elo 1725L 17 Touch Screen Monitor Installation Guide Product Name: Elo 1725L 17- inch Monitor 0621407 Copyright 2007 McKesson Corporation. All rights reserved. This documentation is an unpublished work
More informationXConsole GUI setup communication manual September 2010.
XConsole GUI setup communication manual September 2010. XConsole is compatible with Microsoft XP, Vista and Windows 7. The software will also work if using Boot camp on a Mac. IMPORTANT NOTES: - Do NOT
More informationHow do I configure the wireless printer using a USB or Ethernet cable and install the printer driver in Windows?
How do I configure the wireless printer using a USB or Ethernet cable and install the printer driver in Windows? STEP I: Gather the wireless network settings of your wireless access point or wireless router
More informationDriver Installation (USB 2.0) and Software configuration manuals for Sopro Imaging, EagleSoft, and Dentrix Image 4.5
Driver Installation (USB 2.0) and Software configuration manuals for Sopro Imaging, EagleSoft, and Dentrix Image 4.5 124 Gaither Drive - Suite 140 - Mount Laurel, NJ 08054 USA Tel: 800-289-6367 Fax: 856-222-4726
More informationUSB to Serial Quick Installation Guide
Introduction USB to Serial Quick Installation Guide SIIG's USB to Serial is designed to instantly add an additional RS232 9-pin serial port to your computer via an available USB port. Key Features and
More informationPrinter Support Guide. FedEx Ship Manager Software
Printer Support Guide FedEx Ship Manager Software Printer FAQs Installing Printer Drivers How do I download and install the Zebra printer drivers? To download and install the current Zebra printer drivers
More informationUsing a USB to Serial adapter and Terminal Emulator in Windows 7 to communicate with a DM101
Using a USB to Serial adapter and Terminal Emulator in Windows 7 to communicate with a DM101 Z Technology Application Note No: 40 This application note outlines the simple process of installing and using
More informationImage Assistant. User Guide. Image Assistant. Laplink Software, Inc. User Guide. The ONLY Way to Restore an Old Image to a New PC!
1 Image Assistant Laplink Software, Inc. Customer Service/Technical Support: Web: http://www.laplink.com/help E-mail: CustomerService@laplink.com Laplink Software, Inc. 14335 NE 24th Street, Suite 201
More informationOMEGA STUDIO SOFTWARE INSTALLATION GUIDE
OMEGA STUDIO SOFTWARE INSTALLATION GUIDE USB Device Drivers, Cubase LE Setup, and Pantheon Reverb Plug-in for Windows XP Cubase LE Setup and Pantheon Reverb Plug-in for Mac OS X Congratulations on your
More information3. USB DRIVER. 3-1. Installation of USB driver. 3-1-1. Driver for Infinity SD Data Logger. INFINITY Series Acquisition Tools Manual
3. USB DRIVER 3-1. Installation of USB driver Before you launch this software, the driver should be once surely registered. Access between the instrument and a PC through the USB cable supplied by us as
More informationInstallation of USB Virtual COM. Version 1.02
Installation of USB Virtual COM Version 1.02 RELEASE NOTES Version Date Notes 1.02 May 13, 2014 Modified: Install USB Virtual COM Drivers files on CD updated 1.01 Dec. 10, 2009 Supports driver for Windows
More informationSoftware Installation/Usage Guide for Accessing the Hard Drive on a Computer Network Edition (Gigabit) v2.0
Minimum Hardware Requirements: Software Installation/Usage Guide for Accessing the Hard Drive on a Computer Network Edition (Gigabit) v2.0 1. Pentium 3 Class microprocessor or better 2. Ethernet 10/100
More informationUSB CENTRAL NODE WN.CN.U(X) Installation
Installation Correct in: June 2008 Table of Contents 1.0 COMMISSIONING. 3 1.1 Foreword 3 1.2 Installation of the software 3 1.3 Energy supply for USB central node WN.CN.U(X) 3 1.4 Installation of software
More informationConfig software for D2 systems USER S MANUAL
DT-CONFIG SOFTWARE Config software for D2 systems USER S MANUAL CONTENTS 1. Introductions ------------------------------------------------------------------- 3 2. System Requirement and Connection ----------------------------------------
More informationSirona SIDEXIS Installation
Sirona SIDEXIS Installation The installation and configuration of Sopro inter-oral cameras with SIDEXIS version 2.3 is a three step process. The first step is to install the USB 2.0 driver and test the
More informationTHIS GUIDE PROVIDES ASSISTANCE WITH THE INSTALLATION OF COMMUNICATION PORTS AND DEVICE DRIVERS FOR GLOBALSTAR SATELLITE PHONES AND EQUIPMENT.
1 Table of Contents THIS GUIDE PROVIDES ASSISTANCE WITH THE INSTALLATION OF COMMUNICATION PORTS AND DEVICE DRIVERS FOR GLOBALSTAR SATELLITE PHONES AND EQUIPMENT. Windows XP/2000 2 GSP-1700 for Windows
More informationSOFTWARE INSTALLATION INSTRUCTIONS
AUDITGARD LGA Electronic Combination Lock SOFTWARE INSTALLATION INSTRUCTIONS Implementation Package The AuditGard Software implementation package includes: 707013 AuditGard Software Install CD 42145 Programming/Audit
More informationDirectOut Technologies
Installation Guide for USB Control This document is divided into three sections: Installation D.O.TEC USB Serial Driver Installation D.O.Update Firmware Update It refers to D.O.TEC products: D.O.TEC MADI.SRC
More informationIrDA-USB IrDA USB Adapter
IrDA-USB IrDA USB Adapter The IrDA USB Adapter enables infrared wireless data communication through your PC s USB port. No IRQ, DMA settings nor configurations, the IrDA USB Adapter is much better than
More informationShearwater Research Dive Computer Software Manual
Shearwater Research Dive Computer Software Manual Revision 1.3 Table of Contents 1. Basic overview of components 2. O/S IrDA driver installation 2.1 USB IrDA installation for Windows XP Home/Pro editions
More informationInstallation Instructions
Installation Instructions Windows USB driver for Installation If a Diagnostic Interface with USB is connected to a PC with a Windows operating system 98, ME, XP or Vista for the first time, it is necessary
More informationPL2303HXA/XA Windows 8 Update Driver Installation. How to Update Driver to Support PL2303HXA/XA in Windows 8 Operating Systems
How to Update Driver to Support PL2303HXA/XA in Windows 8 Operating Systems Requirements USB Device with embedded PL2303HX (Rev A) or PL2303X (Rev A) chip version Driver Installer & Build date: 1.5.0 (10/21/2011)
More informationInstallation Manual LATC-W1
Installation Manual PRODUCT NAME Controller Setting Software MODEL / Series / Product Number LATC-W1 [Before using this product] Read the "End-User License Agreement" shown on the next page carefully and
More informationUSB device driver installation for the weatronic update cable and the TX-Module
USB device driver installation for the weatronic update cable and the TX-Module Index 1. Information about the USB connection 1 2. Installation of the USB driver 1 2.1 Installation of the USB driver for
More informationHUMAC2009 Software Installation Instructions for Windows XP and Vista
101 Tosca Drive Stoughton, MA 02072 USA (Phone) 781.297-2034 (FAX) 781.297-2039 (Web) www.csmisolutions.com HUMAC2009 Software Installation Instructions for Windows XP and Vista 1. Program Requirements...
More informationBioWin Network Installation
BioWin Network Installation Introduction This document outlines the procedures for installing the network version of BioWin. There are three parts to the network version installation: 1. The installation
More informationThuraya XT Data & GMPRS
Thuraya XT Data & GMPRS Windows Vista: Installing USB Drivers: 1. Insert the disc that came with your Thuraya XT into your computer. Once the Thuraya software has loaded, select Thuraya XT Upgrade. 2.
More informationInstalling jabra pc suite. V01_0905 Jabra is a registered trademark of GN Netcom A/S www.jabra.com
Installing jabra pc suite V01_0905 Jabra is a registered trademark of GN Netcom A/S www.jabra.com JABRA PC SUITE OVERVIEW Elements of the Jabra PC Suite The Jabra PC Suite is a collection of PC programs
More informationUsing the Communication Ports on the DG-700 and DG-500 Digital Pressure Gauges
Using the Communication Ports on the DG-700 and DG-500 Digital Pressure Gauges 1. USB and Serial Communication Ports: Newer DG-700 and DG-500 gauges contain both a USB and a DB-9 Serial Communication Port,
More informationNetworking. General networking. Networking overview. Common home network configurations. Wired network example. Wireless network examples
Networking General networking Networking overview A network is a collection of devices such as computers, printers, Ethernet hubs, wireless access points, and routers connected together for communication
More informationFSU Inventory Scanner Set up & Use for Windows PC
FSU Inventory Scanner Set up & Use for Windows PC FSU Inventory Scanner kit: 1 FSU Property Scanner (Model: CipherLab 8100) 1 Scanner Cradle 1 Scanner Cradle Power Supply 1 USB Cradle to PC Connecter Cable
More informationAccounts Production Installation Guide
Accounts Production Installation Guide Copyright statement Sage (UK) Limited and Sage Hibernia Limited, 2014. All rights reserved. If this documentation includes advice or information relating to any matter
More informationSerial/ Parallel Combo PCi Card user manual
Serial/ Parallel Combo PCi Card user manual Model 165495 MAN-165495-UM-1007-02 introduction Thank you for purchasing this MANHATTAN Serial/Parallel Combo PCI Card, Model 165495. The easy-to-follow instructions
More informationRDC-7 Windows XP Installation Guide
RDC-7 Windows XP Installation Guide CONTENTS 1. End User License Agreement...3 2. Important notes...4 3. Customer support...4 4. Installing the USB driver...4 I. Prior to installation...4 II. Installation
More informationPrinter Driver Installation Manual
Printer Driver Installation Manual Copyrights Any unauthorized reproduction of the contents of this document, in part or whole, is strictly prohibited. Limitation of Liability SATO Corporation and its
More informationBoot Camp Installation & Setup Guide
Boot Camp Installation & Setup Guide Contents 4 Introduction 5 What You Need 6 Installation Overview 6 Step 1: Check for updates. 6 Step 2: Open Boot Camp Assistant. 6 Step 3: Install Windows. 6 Step 4:
More informationJTAGjet. series SIGNUM SYSTEMS CORPORATION. USB 2.0 Driver for JTAGjet and ADM51. Installation Instructions
JTAGjet series SIGNUM SYSTEMS CORPORATION USB 2.0 Driver for JTAGjet and ADM51 Installation Instructions COPYRIGHT NOTICE Copyright (c) 2011 by Signum Systems Corporation. All rights are reserved worldwide.
More informationMN POS TM. Hardware & Peripherals. All required hardware may be purchased from Home Office.
Important Notice Enclosed you will find the MN POS installation DVD for Windows 7 and Windows XP. Please keep all disks in a safe place in the Studio. If you purchased a computer from Home Office, MN POS
More informationMotorola Phone Tools. Quick Start
Motorola Phone Tools Quick Start Contents Minimum Requirements...2 Before Installing Motorola Phone Tools...3 Installing Motorola Phone Tools...4 Mobile Device Installation and Configuration...5 Online
More informationGuide for Remote Control PDA
030.0051.01.0 Guide for Remote Control PDA For Use with Bluetooth and a PC Running Windows 7 Table of Contents A. Required Parts... 3 B. PC Software Installation... 3 C. Configure PC Software... 4 D. Testing
More informationCODESOFT Installation Scenarios
CODESOFT Installation Scenarios NOTES: CODESOFT is a separate install from existing versions of CODESOFT. You will need to make note of your current settings (default directories, etc.) so you can duplicate
More informationCOMBOGARDPRO. 39E Electronic Combination Lock SOFTWARE INSTALLATION INSTRUCTIONS
COMBOGARDPRO 39E Electronic Combination Lock SOFTWARE INSTALLATION INSTRUCTIONS IMPLEMENTATION PACKAGE The ComboGard Pro Software implementation package includes: 707012 ComboGard Pro Software Install
More information1 Installation. Note: In Windows operating systems, you must be logged in with administrator rights to install the printer driver.
Installation A printer driver is an application that manages communication between a printer and your computer. Once installed, the printer driver settings must be configured in the printer Properties
More informationGERBER EDGE USB-to-Parallel Option Kit
GERBER EDGE USB-to-Parallel Option Kit 1 of 8 The USB-to-Parallel Option kit is a possible solution to connect your GERBER EDGE or EDGE 2 to OMEGA 2.5.1 or higher using a custom USB-to-Parallel cable.
More information2-Port RS232 Serial PCI with 16950 UART Quick Installation Guide
2-Port RS232 Serial PCI with 16950 UART Quick Installation Guide Introduction The 2-Port RS232 Serial PCI with 16950 UART high-speed serial card provides two RS-232 9-pin serial ports. Key Features and
More informationPP8X Printer Driver Installation Instruction
PP8X Printer Driver Installation Instruction Pinnacle Technology Corp. CONTENTS 1 BT Device Installation... 1 2 Printer Driver Installation... 6 3 How to Know the Connecting Port... 10 4 How to Configure
More informationLPT1 Printer Connector. External Power Supply Connector Power Indicator
AXIS 1650 Set-up Instructions Page 3 Unpack box Verify that you have all the items listed below: LPT1 Printer Connector Network Indicator Ethernet Connector External Power Supply Connector Power Indicator
More informationMetasys System Direct Connection and Dial-Up Connection Application Note
Metasys System Direct Connection and Dial-Up Connection Application Note Code No. LIT-1201639 Software Release 5.1 Issued August 27, 2013 Supersedes October 4 2010 Refer to the QuickLIT website for the
More informationCassette2CD Wizard User's Manual
Cassette2CD Wizard User's Manual Table of Contents 1. Installation Instructions a. Connecting tape-deck to the computer b. Installing the Software 2. Using Cassette2CD Wizard a. Setting up and Testing
More informationUSB PC Adapter V4 Configuration
Programming PC adapter V4 USB PC Adapter V4 Configuration PC adapter with USB cable Flat Ribbon Cable Power Supply Unit Device Driver General The USB PC adapter V4 is used for communication between a PC
More information