Using a USB to Serial adapter and Terminal Emulator in Windows 7 to communicate with a DM101

Save this PDF as:
 WORD  PNG  TXT  JPG

Size: px
Start display at page:

Download "Using a USB to Serial adapter and Terminal Emulator in Windows 7 to communicate with a DM101"

Transcription

1 Using a USB to Serial adapter and Terminal Emulator in Windows 7 to communicate with a DM101 Z Technology Application Note No: 40 This application note outlines the simple process of installing and using a USB to Serial adapter, and a Terminal Emulator program on a Windows 7 PC to communicate with a Z Technology DM101 ATSC receiver. Most Windows 7 PCs and Laptops no longer include an RS-232 COM port or the but have a multitude of USB ports. Windows 7 has dropped Hyperterminal, the Terminal Emulator that was in Windows 98 and Windows XP, a generic Terminal Emulator program can replace Hyperterminal. This Application note will introduce a generic open source Terminal Emulator named PuTTY. Z Technology recommends using a USB 2.0 port on your PC or Laptop, a USB to Serial adapter containing a Prolific chip. These are inexpensively available as a Sewell model SW See Step1: Install the USB to Serial Driver for the USB to Serial adapter. See the manufactures instructions. Typically this consists of inserting a CD ROM supplied with the USB to Serial adapter, then running an installation program. If you don t see a choice to install a driver for Windows 7, choose the driver for Windows Vista. Step 2: Insert the USB to Serial adapter into an available USB 2.0 port on your PC or Laptop. Some balloon messages should appear about finding drivers for the new device. Then more balloon messages about the driver installed, the device ready for use. Windows has created a virtual COM port on the PC. You will need to find out the COM port number, in order to use a terminal emulator program to communicate with the DM101. Step 3: Find the port number for your Virtual COM port. Click the Windows Start button, the in the Search programs and files box type Device Manager and hit Enter. You should see a screen like the one below.

2 Double click on Ports(COM & LPT) and you should see a screen like the one below. Note: When a USB to Serial adapter is plugged into a USB port a COM port number Windows reserves a COM port number for that device. If you plug the adapter into a different USB port Windows will assign a different COM port number. It s a good idea to always plug your USB to Serial adapter into the same USB port to avoid COM port numbering confusion. We see above that Windows has assigned COM4 to our USB to Serial adapter. Step 4: Install a Terminal Emulator. In this example we will install a simple open source terminal emulator called PuTTY. Follow the links at to 2

3 download putty.exe for windows. You can save the putty.exe executable to your desktop. Once complete you will see the putty.exe icon on your desktop. Step 5: Configure PuTTY. Double click on the putty.exe icon, a configuration screen appears. Step 6: The screen changes to the one below. Under Connection Type: click Serial Change the COM number to for situation, in this example COM4 3

4 Step 7: In the left Category column click Terminal, the screen below appears, Under Set various terminal options check Implicit LF in every CR, in the Line discipline options-local Echo select Force on. Step 8: In the left Category column click Serial, the screen below appears, under Flow Control select None. 4

5 Step 9: In the left Category column click Session, this brings you back to the first screen that now looks like the screen below. In the Saved Sessions box type in an appropriate name for this configuration, in this example DM101 on COM4, the click the SAVE button. 5

6 Now you have a saved configuration that you can load in the future. Step 10: Click the OPEN button and PuTTY will start, with the configuration you just created. You will see the screen below. Step 11: Test the communication. Make sure that you have the USB to Serial Adapter plugged into the female end of the RS-232 cable that came with the DM101, and the other side of the cable, the male end, plugged into the back of the DM101, and the DM101 is plugged into power, and the Front LED display show a channel number. Type a? at the prompt, you should see the DM101 respond with the Help message. 6

7 You can now use the PuTTY terminal emulator to configure, control, and monitor the DM101 using the Z-Link protocol described in the DM101 User Manual. If you don t see the above response, you ll need to go back and check the settings. To check the settings, right click on the putty.exe banner at the top of the window. That will take you back to the putty configuration screen. 7

USA MOBILITY CABLE CONNECTION AND SOFTWARE DRIVER INSTALLATION INSTRUCTIONS. For. Unication M90 Device USB To RS232 Adapter TABLE OF CONTENTS

USA MOBILITY CABLE CONNECTION AND SOFTWARE DRIVER INSTALLATION INSTRUCTIONS. For. Unication M90 Device USB To RS232 Adapter TABLE OF CONTENTS USA MOBILITY CABLE CONNECTION AND SOFTWARE DRIVER INSTALLATION INSTRUCTIONS For Unication M90 Device USB To RS232 Adapter TABLE OF CONTENTS SECTION 1: ADAPTER CABLE CONNECTION INSTRUCTIONS... 2 SECTION

More information

Select Correct USB Driver

Select Correct USB Driver Select Correct USB Driver Windows often installs updated drivers automatically, and defaults to this latest version. Not all of these drivers are compatible with our software. If you are experiencing communications

More information

Configuring Serial Terminal Emulation Programs

Configuring Serial Terminal Emulation Programs Configuring Serial Terminal Emulation Programs Table of Contents Configuring Serial Terminal Emulation Programs: An Introduction... 3 HyperTerminal... 3 Configuring HyperTerminal... 3 Tera Term Pro...

More information

ScanWin Installation and Windows 7-64 bit operating system

ScanWin Installation and Windows 7-64 bit operating system ScanWin Installation and Windows 7-64 bit operating system In order to run the ScanWin Pro install and program on Windows 7 64 bit operating system you need to install a Virtual PC and then install a valid,

More information

NOTE: PLEASE DO NOT ATTEMPT TO INSTALL THE SOFTWARE BEFORE READING THIS DOCUMENT.

NOTE: PLEASE DO NOT ATTEMPT TO INSTALL THE SOFTWARE BEFORE READING THIS DOCUMENT. INLINE 5 Software INSTALL BULLETIN Page 2: Installing INLINE 5 Page 6: Removing INLINE 5 NOTE: PLEASE DO NOT ATTEMPT TO INSTALL THE SOFTWARE BEFORE READING THIS DOCUMENT. IMPROPER INSTALLATION OR USE CAN

More information

Using the Communication Ports on the DG-700 and DG-500 Digital Pressure Gauges

Using the Communication Ports on the DG-700 and DG-500 Digital Pressure Gauges Using the Communication Ports on the DG-700 and DG-500 Digital Pressure Gauges 1. USB and Serial Communication Ports: Newer DG-700 and DG-500 gauges contain both a USB and a DB-9 Serial Communication Port,

More information

USB PC Adapter V4 Configuration

USB PC Adapter V4 Configuration Programming PC adapter V4 USB PC Adapter V4 Configuration PC adapter with USB cable Flat Ribbon Cable Power Supply Unit Device Driver General The USB PC adapter V4 is used for communication between a PC

More information

IVS-Basic 4.4 IVS-Professional 4.4 IVS-PowerPoint 1.1

IVS-Basic 4.4 IVS-Professional 4.4 IVS-PowerPoint 1.1 Manual IVS-Basic 4.4 IVS-Professional 4.4 IVS-PowerPoint 1.1 Supplement connecting USB RF-II Base Station 1213 2 Contents Contents... 3 Connecting the RF-II Base Station to the USB port... 4 Using the

More information

The care and feeding of Pythons at the Redmond Zoo. (Using Micro Python and pyboard with Windows)

The care and feeding of Pythons at the Redmond Zoo. (Using Micro Python and pyboard with Windows) The care and feeding of Pythons at the Redmond Zoo. (Using Micro Python and pyboard with Windows) Introduction. Pyboard connects to Windows using a standard micro USB cable. It can operate in four different

More information

Transferring Scans from your Dolphin into Destiny

Transferring Scans from your Dolphin into Destiny Transferring Scans from your Dolphin into Destiny Summary: This article is intended to provide Destiny users with an overview of the following tasks 1. Downloading the Dolphin Transfer Utility to their

More information

Installation Notes for Prolific PL-2303 USB Driver for USB - RS232 Adaptor Cable 1. Uninstall Existing USB-Serial Adaptor Drivers

Installation Notes for Prolific PL-2303 USB Driver for USB - RS232 Adaptor Cable 1. Uninstall Existing USB-Serial Adaptor Drivers 41 Vine Street Magill SA 5072 Phone: 08 8332 9044 Fax: 08 8332 9577 mea@mea.com.au Installation Notes for Prolific PL-2303 USB Driver for USB - RS232 Adaptor Cable 1. Uninstall Existing USB-Serial Adaptor

More information

Supplemental USB Driver Installation Guide

Supplemental USB Driver Installation Guide Windows 2000/XP/Vista/7 Installation Supplemental USB Driver Installation Guide 1) Do not plug in your Auterra USB OBD Adapter until after the driver is installed. 2) The USB driver is located on the your

More information

AUDITVIEW USER INSTRUCTIONS

AUDITVIEW USER INSTRUCTIONS The AuditGard AuditView software allows the Manager to view, save, and print the audit records. The AuditGard lock maintains the last 512 lock events in non-volatile memory. Accessing the audit records

More information

Adafruit's Raspberry Pi Lesson 5. Using a Console Cable

Adafruit's Raspberry Pi Lesson 5. Using a Console Cable Adafruit's Raspberry Pi Lesson 5. Using a Console Cable Created by Simon Monk Last updated on 2014-09-15 12:00:13 PM EDT Guide Contents Guide Contents Overview You Will Need Part Software Installation

More information

Installation Notes for Prolific PL-2303 USB Driver for USB - RS232 Adaptor Cable 1. Uninstall Existing USB-Serial Adaptor Drivers

Installation Notes for Prolific PL-2303 USB Driver for USB - RS232 Adaptor Cable 1. Uninstall Existing USB-Serial Adaptor Drivers Measured by Experience Installation Notes for Prolific PL-2303 USB Driver for USB - RS232 Adaptor Cable 1. Uninstall Existing USB-Serial Adaptor Drivers Uninstall any existing USB-RS232 drivers before

More information

Download ME6008M1 Event Log

Download ME6008M1 Event Log Download ME6008M1 Event Log ManuFlo Flow Measurement Products A Division of Manu Electronics Pty Ltd 41 Carter Road, Brookvale NSW 2100 Australia Phone: +61 2 9938-1425 or +61 2 9905-4324 Fax: +61 2 9938-5852

More information

User's Guide DylosLogger Software Version 1.6

User's Guide DylosLogger Software Version 1.6 User's Guide DylosLogger Software Version 1.6 The DylosLogger software allows users of Dylos Air Quality Monitors equipped with PC interface to easily record, download, and graph data. The COM port is

More information

Elite and elink Driver Installation

Elite and elink Driver Installation Elite and elink Driver Installation For Hornby DCC Controllers (Revision May 2013) Copyright 2013 by Invicto Systems Limited. All rights reserved. Preface With the increasing number of different versions

More information

Installation Instructions for 9555 USB Driver

Installation Instructions for 9555 USB Driver Prior to using the data modem features of your 9555 handset; you must first install the VCOMPORT 9555 USB Driver. This driver is compatible with: Windows XP Service Pack 2, Windows 2000 Service Pack 4,

More information

METTLER TOLEDO USB Option Windows XP Driver Installation

METTLER TOLEDO USB Option Windows XP Driver Installation This instruction describes the driver installation and deinstallation procedure of METTLER TOLEDO USB Option with Windows XP. The USB Option is installed as additional serial interface (Virtual COM Port

More information

PP8X Printer Driver Installation Instruction

PP8X Printer Driver Installation Instruction PP8X Printer Driver Installation Instruction Pinnacle Technology Corp. CONTENTS 1 BT Device Installation... 1 2 Printer Driver Installation... 6 3 How to Know the Connecting Port... 10 4 How to Configure

More information

TAG MANAGER User Guide

TAG MANAGER User Guide TAG MANAGER User Guide NLIS-Australian Edition Version 1.01 18/07/2013 IMPORTANT! This User Guide must be read in conjunction with Reader, prior to use. Copyright Allflex Australia Pty Ltd 2013 IMPORTANT-

More information

Connecting your Omega/BetaPAT PLUS to a PC via a USB

Connecting your Omega/BetaPAT PLUS to a PC via a USB Connecting your Omega/BetaPAT PLUS to a PC via a USB Install software Windows XP and below Insert the disc into your computers disc drive and run through the setup wizard. Windows Vista & 7 1. Insert the

More information

Installing PowerLink on Windows 7 64-bit

Installing PowerLink on Windows 7 64-bit Instruction Manual Version 1.0, Code No. 20 751 806 1 Introduction... 3 2 Installing Virtual PC... 3 3 Configuring Windows XP Mode... 5 4 Installing Powerlink to Virtual XP... 8 5 Run PowerLink software

More information

Running the R4 Software on a USB Port

Running the R4 Software on a USB Port Tech Note Running the R4 Software on a USB Port Like a lot of other engine management software programs that have been around for a while, the R4 program is designed to communicate through a 9-pin serial

More information

Installing the Gerber P2C Plotter USB Driver

Installing the Gerber P2C Plotter USB Driver Installing the Gerber P2C Plotter USB Driver 1 You can install a Gerber P2C plotter using a USB connection and communicate with it using compatible design software. The following procedures describe installing

More information

KI6501 Data Manager. Software User Manual

KI6501 Data Manager. Software User Manual KI6501 Data Manager Software User Manual CONTENTS 1. Installation of USB Virtual COM Port driver software... 2 2. Installation of KI6501 Manager Software... 2 3. Connecting KI6501 to PC (Personal Computer)

More information

Using Windows Device manager to determine your USB virtual comports.

Using Windows Device manager to determine your USB virtual comports. www.g4zlp.co.uk/index.shtml Using Windows Device manager to determine your USB virtual comports. OK, so you re not too familiar with Windows Device Manager The following notes should help; this is a short

More information

1-10 The USB PIC K150 microcontroller programmer Hardware version V2.0 File version V2.0 Product Image

1-10 The USB PIC K150 microcontroller programmer Hardware version V2.0 File version V2.0 Product Image 1-10 The USB PIC K150 microcontroller programmer Hardware version V2.0 File version V2.0 Product Image 2-10 Product Description: K150 is the latest of a low-cost high-performance PIC programmer, support

More information

Communication with BushingGard using computer USB port

Communication with BushingGard using computer USB port Communication with BushingGard using computer USB port There are two ways of communication with BushingGard through computer USB port: Direct communication between computer USB port and BushingGard USB

More information

Installing the drivers for the Current Cost Data Cable

Installing the drivers for the Current Cost Data Cable Installing the drivers for the Current Cost Data Cable Contents Introduction... 3 About Current Cost Monitors... 3 About the XML... 3 The Historical XML Feed... 3 Forcing the History to Download... 3 About

More information

Installation of the USB to RS 485 Converter

Installation of the USB to RS 485 Converter Installation of the USB to RS 485 Converter Contents CONTENTS 1 GENERAL INSTRUCTIONS 1 HINT 1 INSTALLATION USING SETUP EXECUTABLE (RECOMMENDED INSTALLATION PROCEDURE) 2 INSTALLATION BY PLUGGING IN THE

More information

Intuition by LG Software Update

Intuition by LG Software Update Overview To help you with the system update for your Intuition by LG this page contains the following information: o System Update Instructions for Windows Vista users o System Update Instructions for

More information

USB Driver. Installation Manual

USB Driver. Installation Manual USB Driver Installation Manual Issue 1.00 Detailed guide for the installation of Actisense USB Drivers under the following operating systems: Windows XP / 2000 Windows Vista USB Driver Installation Manual

More information

Current Cost Data Cable User Guide. Installing and configuring the data cable

Current Cost Data Cable User Guide. Installing and configuring the data cable Current Cost Data Cable User Guide Installing and configuring the data cable Contents About the Data Cable... 3 Data Cable Installation Steps... 3 Post Installation Checks... 3 So the driver is installed,

More information

Windows XP.. ELITE Firmware Update procedures.. v1.41

Windows XP.. ELITE Firmware Update procedures.. v1.41 Windows XP.. ELITE Firmware Update procedures.. v1.41 Download and Extract the ELITE update. Note.. Please ensure you are logged in to Windows as an Administrator before carrying out the instructions in

More information

2013 CNS Geiger Kit Instructions read me Page 1 of 5

2013 CNS Geiger Kit Instructions read me Page 1 of 5 2013 CNS Geiger Kit Instructions read me Page 1 of 5 We re pleased to inform you that Aware Electronics have provided the CNS with a custom version of their Aw-Radw software 8.4a. There are two new versions:

More information

Title: ZOLL USB Direct Connect Cable Installation Instructions

Title: ZOLL USB Direct Connect Cable Installation Instructions ZOLL USB Direct Connect Cable Installation Instructions Document Status: Released Document #: 48x126-ZOLL-003 Page 1 of 7 Revision History DATE REV REASON January 9, 2008 A Initial Release August 12, 2008

More information

PL-2303 (Chip Rev H, HX, X) USB to Serial Adapter Windows Driver Installer Manual

PL-2303 (Chip Rev H, HX, X) USB to Serial Adapter Windows Driver Installer Manual PL-2303 (Chip Rev H, HX, X) USB to Serial Adapter Windows Driver Installer Manual For Windows 98/ME/2000/XP/Vista/7 Release Version 1.3 (2/4/2010) Contents Introduction Features & Specifications System

More information

ISK 200 Driver Installation

ISK 200 Driver Installation Driver Installation HB_ISK200_E_V10.doc 1 GENERAL 1. GENERAL When connecting an interface converter ISK 200 to a PC an USB driver has to be installed to recognize the ISK 200. On the enclosed CD-ROM the

More information

SAPIP GUI INSTALLATION. Table of Contents

SAPIP GUI INSTALLATION. Table of Contents QUICK START GUIDE SAPIP GUI INSTALLATION Table of Contents 1. Install CSU cable driver for SapIP..2-3 2. Check for pre-requisite for SAPIP GUI install......2 3. Check for pre-requisite for SAPIP GUI install...2-6

More information

Using and Installing: HCS12C32 Board, HCS12C128 Board, USB-to-Serial port driver, and HyperTerminal

Using and Installing: HCS12C32 Board, HCS12C128 Board, USB-to-Serial port driver, and HyperTerminal Using and Installing: HCS12C32 Board, HCS12C128 Board, USB-to-Serial port driver, and HyperTerminal CMPEN 472, Spring 2013, Kyusun Choi Download from the PSU Angel cmpen472 page, the USB-to-Serial port

More information

1. Introduction... 1. Under Windows 98SE... 2. Under Windows ME... 6. Under Windows 2000... 10. Under Windows XP... 13. Under Windows Vista...

1. Introduction... 1. Under Windows 98SE... 2. Under Windows ME... 6. Under Windows 2000... 10. Under Windows XP... 13. Under Windows Vista... Index 1. Introduction... 1 2. Installation of USB to Serial Converter Under Windows 98SE... 2 3. Installation of USB to Serial Converter Under Windows ME.... 6 4. Installation of USB to Serial Converter

More information

Windows 8 Installation Instructions for the PR3. STOP! Read these instructions before connecting the PR-3 to your Computer

Windows 8 Installation Instructions for the PR3. STOP! Read these instructions before connecting the PR-3 to your Computer Windows 8 Installation Instructions for the PR3 Required equipment: PR3 Installation CD or downloaded and extracted PR3 files from www.digitrax.com/downloads (PR3 Windows XP and Vista Drivers) USB Cable

More information

USB to RS-485 Optically Isolated Interface Handbook Revision 1.0

USB to RS-485 Optically Isolated Interface Handbook Revision 1.0 311-70 USB to RS-485 Optically Isolated Interface Handbook Revision 1.0 Contents Overview... 1 RS-485 Connections... 1 Shield... 1 Line Term... 2 Bias 1 & Bias 2... 2 RS-485 Cable... 2 USB Installation...

More information

Application Note: Connecting to a 2500 Series Processor using PLC Workshop

Application Note: Connecting to a 2500 Series Processor using PLC Workshop Application Note: Connecting to a 2500 Series Processor using PLC Workshop This application note will describe a step by step process for the three ways to connect to a 2500-CXXX with PLC Workshop. The

More information

Figure 1: Starting the search for driver for USB HID device

Figure 1: Starting the search for driver for USB HID device Windows 98 Installation Procedure for the USB Drivers (Virtual Com) For Windows Me: Follow steps 1-8 on pages 7-12 For Windows 2000: Follow steps 1-11 on pages 13-18 For Windows XP: Follow steps 1-12 on

More information

USB to Serial Adapter Driver Installation Manual

USB to Serial Adapter Driver Installation Manual USB to Serial Adapter Driver Installation Manual For Windows 98 / ME / 200 0 / XP / Vista / 7 Contents Introduction Features & Specifications System Requirements Installing the Device Uninstalling the

More information

Acton Research Technical Support SpectraPro Diagnostic Procedure

Acton Research Technical Support SpectraPro Diagnostic Procedure Acton Research Technical Support SpectraPro Diagnostic Procedure Table of Contents Introduction to the Acton Research Technical Support SpectraPro Diagnostic Procedure...1 Checking the USB Drivers...2

More information

ScanShell.Net Install Guide

ScanShell.Net Install Guide ScanShell.Net Install Guide Please install the software first - DO NOT PLUG IN THE SCANNER The scanner has been carefully packaged to avoid damage during transportation. Before operating the scanner, please

More information

ABB solar inverters. Installation and setup instruction Aurora Manager TL software and ABB PVI-USB-RS232_485 adapter

ABB solar inverters. Installation and setup instruction Aurora Manager TL software and ABB PVI-USB-RS232_485 adapter ABB solar inverters Installation and setup instruction Aurora Manager TL software and ABB PVI-USB-RS232_485 adapter Introduction This document details the procedure for the installation on a user s computer

More information

To get times into Arena Managemnt program, from the Farm Tek Timer Console.

To get times into Arena Managemnt program, from the Farm Tek Timer Console. To get times into Arena Managemnt program, from the Farm Tek Timer Console. You will need to purchase from Farm Tek the Computer Interface Cable, and a USB to Serial adapter id your computer does not have

More information

Midland BT Updater BTUpdater Program Program file (x86) ), Midland

Midland BT Updater BTUpdater Program Program file (x86) ), Midland Midland BT Updater After you downloaded the BT Updater setup application from the web site, double click on it and follow the installation procedure. The BTUpdater application is automatically installed

More information

Adafruit's Raspberry Pi Lesson 5. Using a Console Cable

Adafruit's Raspberry Pi Lesson 5. Using a Console Cable Adafruit's Raspberry Pi Lesson 5. Using a Console Cable Created by Simon Monk Last updated on 2016-04-12 08:03:49 PM EDT Guide Contents Guide Contents Overview You Will Need Part Software Installation

More information

TN-0040. DTUSB Information for Existing DT80 Series Users 1 Overview

TN-0040. DTUSB Information for Existing DT80 Series Users 1 Overview DTUSB Information for Existing DT80 Series Users 1 Overview This document is intended for existing DT8x Series 2 users wishing to use the new "plug and play" facilities for establishing a PPP connection

More information

AUDITVIEW USER INSTRUCTIONS

AUDITVIEW USER INSTRUCTIONS COMBOGARDPRO AUDITVIEW USER INSTRUCTIONS The ComboGard Pro AuditView software allows the Manager to view, save, and print the audit records. The ComboGard Pro lock maintains the last 63 lock events in

More information

USB Driver Installation for Windows XP

USB Driver Installation for Windows XP USB Driver Installation for Windows XP USB Serial Converter Driver Installation for Windows XP CAUTION: You must use the drivers on the CD-ROM supplied with your USB Device. DO NOT download drivers from

More information

Navigator Installation

Navigator Installation Driver Installation Windows XP & Vista When a USB device is plugged into a Windows computer for the first time, the operating system sees that new devices are present on the USB and goes through a process

More information

Important Note Regarding Your Blu ray Drives

Important Note Regarding Your Blu ray Drives Important Note Regarding Your Blu ray Drives Use these supplemental instructions to complete the setup of your unit Your Disc Publisher unit uses esata to connect the Blu-ray drive(s) to the computer.

More information

Driver Installation and Hyperterminal Operation of iload Digital USB Sensors

Driver Installation and Hyperterminal Operation of iload Digital USB Sensors Driver Installation and Hyperterminal Operation of iload Digital USB Sensors Driver Installation Insert the iload Digital USB Driver CD OR the LoadVUE or LoadVUE Lite CD into your computer s drive. If

More information

Revision Update Instructions- Using Legacy Connect PREP:

Revision Update Instructions- Using Legacy Connect PREP: Revision Update Instructions- Using Legacy Connect Some older versions of Predator software cannot be auto detected by the DS Downloader. Any tool with a revision starting with 7rxx and some older 8rxx

More information

Windows 7 XP Mode Application Note

Windows 7 XP Mode Application Note 17741 Mitchell North, Irvine, CA 92614 USA Tel: 949-833-3355 Fax: 949-833-0322 http://www.genovation.com support@genovation.com Windows 7 XP Mode Application Note Using a MiniTerm with Legacy Software

More information

1 INTRODUCTION. This document describes the procedure to upgrade LTMR.

1 INTRODUCTION. This document describes the procedure to upgrade LTMR. 1 INTRODUCTION This document describes the procedure to upgrade LTMR. Limitation: this package and procedure describe only the upgrade of the LTMR firmware for all network versions (Modbus, Profibus, DeviceNet,

More information

Bluetooth HC-06 with serial port module Easy guide

Bluetooth HC-06 with serial port module Easy guide 1 Bluetooth HC-06 with serial port module Easy guide This manual consists of 3 parts: PART 1. Overview of Bluetooth HC-06 module with serial port. PART 2. Installing Bluetooth HC-06 module with Bolt 18F2550

More information

PL-2305 USB-to-Printer Cable User Installation Guide

PL-2305 USB-to-Printer Cable User Installation Guide PL-2305 USB-to-Printer Cable User Installation Guide Introduction The PL-2305 USB-to-Printer cable provides a bi-directional bridge between the USB host system and IEEE-1284 parallel port printers. The

More information

UX3600/NT/NTL/NTS Quick Start Guide This Quick Start Guide will explain how to connect and communicate with the EAW UX3600, NTL720, NTS250, KFNT, and JFNT powered speakers. Table of Contents 1. Downloading

More information

PL-2303 USB to Serial Adapter User Installation Manual

PL-2303 USB to Serial Adapter User Installation Manual PL-2303 USB to Serial Adapter User Installation Manual (For Vendor Reference Only) For Windows 98/ME/2000/XP Release Version 1.0 (4/08/2002) Contents Introduction Features & Specifications System Requirements

More information

Guide to Installing BBL Crystal MIND on Windows 7

Guide to Installing BBL Crystal MIND on Windows 7 Guide to Installing BBL Crystal MIND on Windows 7 Introduction The BBL Crystal MIND software can not be directly installed on the Microsoft Windows 7 platform, however it can be installed and run via XP

More information

Sio2PC-USB Manual. Sio2PC-USB Manual

Sio2PC-USB Manual. Sio2PC-USB Manual Sio2PC-USB Manual i Sio2PC-USB Manual Sio2PC-USB Manual ii REVISION HISTORY NUMBER DATE DESCRIPTION NAME 1.0 December 29, 2014 Initial release. DN Sio2PC-USB Manual iii Contents 1 Introduction 1 1.1 Features........................................................

More information

Serial Ports Troubleshooting. Rev. 20130322

Serial Ports Troubleshooting. Rev. 20130322 Serial Ports Troubleshooting Rev. 20130322 Copyright 1991-2013 Bio-Logic, Inc. All rights reserved. www.gymassistant.com Contact Information: Telephone: 1-877-496-2778 Ext. 2 Email: Support@GymAssistant.com

More information

Sending Files to a Social Security Laptop

Sending Files to a Social Security Laptop Sending Files to a Social Security Laptop Introduction There are multiple options to send files to your Social Security laptop. A couple of options are to encrypt files and then send them by email or transfer

More information

MonitorKey USB Driver Installation Instructions

MonitorKey USB Driver Installation Instructions MonitorKey USB Driver Installation Instructions The following procedure is used to install the drivers for the USB port of the EDI MonitorKey Programming Tool. If a serial version of the MonitorKey Programming

More information

User Manual (DA-70155)

User Manual (DA-70155) USB TO SERIAL CONVERTER User Manual (DA-70155) Index: A. USB-Serial Cable B. USB-Serial Converter C. How driver works with Modem on Linux RedHat 7.3 A. USB-Serial Cable 1. Product Features 2. System Requirements

More information

User Guide. Select Entry Systems

User Guide. Select Entry Systems User Guide Select Entry Systems Select Gate 2 Serial adapter overview. The OPTSG2SER serial adapter permits communications from a SG-2 and the SG-2 serial adapter to a computer (such as a laptop) with

More information

Global Monitoring + Support

Global Monitoring + Support Use HyperTerminal to access your Global Monitoring Units View and edit configuration settings View live data Download recorded data for use in Excel and other applications HyperTerminal is one of many

More information

2-Serial/1-Parallel Port PCI Adapter

2-Serial/1-Parallel Port PCI Adapter 2-Serial/1-Parallel Port PCI Adapter User Manual Ver. 2.00 All brand names and trademarks are properties of their Respective owners. 1 Features and Benefits Features Supports Standard Parallel Port(SPP),

More information

Thuraya XT-DUAL. Software Upgrade Manual

Thuraya XT-DUAL. Software Upgrade Manual Thuraya XT-DUAL Software Upgrade Manual Version 1 / February 2012 1. INTRODUCTION... 3 2. SOFTWARE UPGRADE WITH WINDOWS 7... 4 2.1 Installation of the Upgrader Package... 4 2.2 Manual detection (optional

More information

DCX Vehicle Update Instructions

DCX Vehicle Update Instructions DCX Vehicle Update Instructions Follow these instructions if you get the message on your Predator that reads: This vehicle needs an update Download here: www.diablosport.com/dcx. This is because the tool

More information

USB232CONV Installation. Version 1.2.0 Copyright 2004 2007 IFTOOLS GbR www.iftools.com

USB232CONV Installation. Version 1.2.0 Copyright 2004 2007 IFTOOLS GbR www.iftools.com USB232CONV Installation Version 1.2.0 Copyright 2004 2007 IFTOOLS GbR www.iftools.com USB232CONV Treiber Installierung Inhalt 1 USB232CONV Introduction...1 2 Virtual COM Port...3 2.1 Windows XP Installation

More information

RS485 Adapters. User Manual October 26, 2008 V1.02 Copyright Light O Rama, Inc. 2006, 2007, 2008 SC485 USB485B USB485 USB485-ISO

RS485 Adapters. User Manual October 26, 2008 V1.02 Copyright Light O Rama, Inc. 2006, 2007, 2008 SC485 USB485B USB485 USB485-ISO SC485 USB485B USB485 USB485-ISO User Manual October 26, 2008 V1.02 Copyright Light O Rama, Inc. 2006, 2007, 2008 This page intentionally blank Table of Contents Introduction... 4 What s in the Box... 5

More information

PL-2305 USB-to-Printer Cable Windows 8 Installation Guide

PL-2305 USB-to-Printer Cable Windows 8 Installation Guide PL-2305 USB-to-Printer Cable Windows 8 Installation Guide Introduction The PL-2305 USB-to-Printer cable provides a bi-directional bridge between the USB host system and IEEE-1284 parallel port printers.

More information

Bluetooth 56K Wireless Modem User's Manual

Bluetooth 56K Wireless Modem User's Manual Bluetooth 56K Wireless Modem User's Manual Index 1. Introduction 2. Specifications 3. Product Shape 4. Bluetooth Modem Mode 4.1. Getting Started 4.2. How to dial-up under Windows For Windows 98 For Windows

More information

TP- 051 GPS RECEIVER

TP- 051 GPS RECEIVER TP- 051 GPS RECEIVER CONTENTS 1. Overview 3 2. Features 3 3. The advantages of TP-051 GPS Receiver 4 4. The appearance and structures 4 5. Applications 5 6. Installation steps for the TP-051 GPS Receiver

More information

2EB/Atlantis/Discovery Hardware Installation Guide for Windows XP

2EB/Atlantis/Discovery Hardware Installation Guide for Windows XP 2EB/Atlantis/Discovery Hardware Installation Guide for Windows XP Follow these steps to install the hardware ONLY after the software has been installed. If you plug in the unit to the computer prior to

More information

OSM 2007 MONITORING SOFTWARE

OSM 2007 MONITORING SOFTWARE OSM 2007 MONITORING SOFTWARE Contents Preparation...3 Software Installation...4 Configuring OSM...6 Connecting a Device...16 Connecting to Station Monitoring Software...19 Troubleshooting...23 Installing

More information

Guide for Remote Control PDA

Guide for Remote Control PDA 030.0035.01.0 Guide for Remote Control PDA For Use with Bluetooth and a PC Running Windows XP Table of Contents A. Required Parts... 3 B. PC Software Installation... 3 C. ActiveSync Software Configuration...

More information

Instructions for the installation of drivers and data reading software (TOOLBOX 4) The simple and reliable way to measure radioactivity.

Instructions for the installation of drivers and data reading software (TOOLBOX 4) The simple and reliable way to measure radioactivity. The simple and reliable way to measure radioactivity. Instructions for the installation of drivers and data reading software (TOOLBOX 4) EN 06/2015 2015 GAMMA-SCOUT GmbH & Co. KG Instructions for Driver

More information

USB Interface Converter

USB Interface Converter USB-2-485 Interface Converter Version: 1.00 April 16 th, 2006 Trinamic Motion Control GmbH & Co. KG D - 20357 Hamburg, Germany 2 USB-2-485 Interface Converter Version Version Date Author Comment 1.00 16-Apr-06

More information

Quick Note 32. Using Digi RealPort with a Digi TransPort Router. UK Support September 2012

Quick Note 32. Using Digi RealPort with a Digi TransPort Router. UK Support September 2012 Quick Note 32 Using Digi RealPort with a Digi TransPort Router UK Support September 2012 1 Contents 1 Introduction... 3 1.1 Outline... 3 1.2 Assumptions... 3 1.3 Version... 3 2 Configuration & scenario...

More information

MGM Brakes e-stroke RS-232 Diagnostic Program Users Guide

MGM Brakes e-stroke RS-232 Diagnostic Program Users Guide MGM Brakes e-stroke RS-232 Diagnostic Program Users Guide The e-stroke RS-232 Diagnostic Program may be used to acquire the following information from the e-stroke GEN 3 CCM: Current Wheel Specific Brake

More information

Z-text SMS Modem Windows XP Installation Instructions NTS Telecom Limited

Z-text SMS Modem Windows XP Installation Instructions NTS Telecom Limited Z-text SMS Modem Windows XP Installation Instructions This guide is intended to help you with the installation of the Z-text software, it only illustrates the stages of installation where you the user

More information

Guide for Remote Control PDA

Guide for Remote Control PDA 030.0051.01.0 Guide for Remote Control PDA For Use with Bluetooth and a PC Running Windows 7 Table of Contents A. Required Parts... 3 B. PC Software Installation... 3 C. Configure PC Software... 4 D. Testing

More information

AIM SOFTWARE AND USB DRIVER INSTALLATION PROCEDURE

AIM SOFTWARE AND USB DRIVER INSTALLATION PROCEDURE AIM SOFTWARE AND USB DRIVER INSTALLATION PROCEDURE CONTENTS AIM software and USB Driver installation Chapter 1 Installing AIM software and AIM USB driver... 2 Chapter 2 Installation under Microsoft Windows

More information

Configuring Windows 7 64 bit for AutoVISION

Configuring Windows 7 64 bit for AutoVISION This document will describe how to configure a 64 bit version of Windows 7 Professional, Ultimate or Enterprise to utilize the Windows XP Mode (Virtual PC) capabilities to allow AutoVISION to be used in

More information

Using the Stevens Shark RS232/RS485 Adapter with Bluetooth Technology with the Campbell CR10(X) Data Logger

Using the Stevens Shark RS232/RS485 Adapter with Bluetooth Technology with the Campbell CR10(X) Data Logger Using the Stevens Shark RS232/RS485 Adapter with Bluetooth Technology with the Campbell CR10(X) Data Logger Introduction The Stevens Shark Wireless Bluetooth Adapter can be used to connect a computer or

More information

USER GUIDE. Ethernet Configuration Guide (Lantronix) P/N: 2900-300321 Rev 6

USER GUIDE. Ethernet Configuration Guide (Lantronix) P/N: 2900-300321 Rev 6 KRAMER ELECTRONICS LTD. USER GUIDE Ethernet Configuration Guide (Lantronix) P/N: 2900-300321 Rev 6 Contents 1 Connecting to the Kramer Device via the Ethernet Port 1 1.1 Connecting the Ethernet Port Directly

More information

Virtual Serial Port over USB For PD & PC Series Printers

Virtual Serial Port over USB For PD & PC Series Printers Technology Brief Virtual Serial Port over USB For PD & PC Series Printers Introduction Physical serial ports are becoming less common on new PCs and laptops. Most computers are equipped only with USB or

More information

USB CENTRAL NODE WN.CN.U(X) Installation

USB CENTRAL NODE WN.CN.U(X) Installation Installation Correct in: June 2008 Table of Contents 1.0 COMMISSIONING. 3 1.1 Foreword 3 1.2 Installation of the software 3 1.3 Energy supply for USB central node WN.CN.U(X) 3 1.4 Installation of software

More information

Installing ABACUS ELECTRICS USB Optical Probes under Windows 7

Installing ABACUS ELECTRICS USB Optical Probes under Windows 7 Installing ABACUS ELECTRICS USB Optical Probes under Windows 7 AN17a This note assumes that you are installing the drivers on to a clean system, i.e. one on which ABACUS ELECTRICS Optical Probe drivers

More information

Config software for D2 systems USER S MANUAL

Config software for D2 systems USER S MANUAL DT-CONFIG SOFTWARE Config software for D2 systems USER S MANUAL CONTENTS 1. Introductions ------------------------------------------------------------------- 3 2. System Requirement and Connection ----------------------------------------

More information