Contents Full Mortise Hinges Heavy Weight Standard Weight Concealed Hinges Startec Tectus Concealed Mortise Mounted Concealed Jamb Door Closer

Size: px
Start display at page:

Download "Contents Full Mortise Hinges Heavy Weight Standard Weight Concealed Hinges Startec Tectus Concealed Mortise Mounted Concealed Jamb Door Closer"

Transcription

1 DOOR HINGES

2 Contents Full Mortise Hinges Heavy Weight For Interior Doors....3 For Exterior Doors.... Standard Weight For Interior Doors....,.7 For Exterior Doors....6 Electrified....8 Spring Hinge....9 Cam-Lift Hinge.... Startec For Interior Doors Receiving Elements Drilling Jig and Bit Tectus For Interior Doors Mounting Plates Receiving Elements Routing Templates and Drilling Jig Concealed Mortise Mounted Power Transfer Device....2 Concealed Jamb Door Closer Perko-Power....2 Perko Perkomatic AH.2

3 Full Mortise Hinge AH.3 1/1

4 Full Mortise Hinge 1/1 AH.

5 Full Mortise Hinge AH. 1/1

6 Full Mortise Hinge 1/1 AH.6

7 Full Mortise Hinge AH.7 1/1

8 Full Mortise Hinge Electrified - Standard Weight For openings where electricity travels from the frame to hardware installed on the door leaf Ball bearing Square corners Non handed ANSI/BHMA A ( 1/2") 3. (.13") Ø1 (Ø19/") 6 (2 9/16") 8 (1 29/") 11 ( 1/2") Model # HB128 Knuckles: Bearings: 2 Pin: Non-Removable Version: 8 Electric through-wires Electrical rating: Wire: up to VDC, 3. Amps continuous, 1 Amps pulse Switch: up to 3 VDC at. Amps Flange thickness: 3. mm (.13 ) W x H: 11 x 11 mm ( 1/2 x 1/2 ) Material: Steel Finish 600 prime coated (USP) brass plated, polished (US3) brass plated, satin (US) bronze plated, oxidized & lacquered (USB) chromium plated, polished (US26) chromium plated, satin (US 26D) Supplied With Wood screws Machine screws Note Not recommended for doors with closing devices. Additional sizes and finishes are available - Please contact Häfele for details. AH.8

9 Full Mortise Spring Hinge AH.9 1/1

10 Full Mortise Cam-Lift Hinge Standard Weight Cam-lift hinges greatly improve the sealing characteristics along the door perimeter Works well as replacement hinge where doors drag Rounded corners Handed 1 (9/16") 3. (.13") 11 ( 1/2") 11 ( 1/2") 7 (1 27/") 3 Model # HB11 Knuckles: 2 Version: Cam-lift Weight Bearing: Up to 300 lbs. door with 3 hinges Lift: 1/8 (3 mm) over 90, maximum lift 1/ (6 mm) over 180 Flange thickness: 3. mm (.13 ) W x H: 11 x 11 mm ( 1/2 x 1/2 ) Material: Stainless Steel Finish Handing 629 stainless steel, polished (US) right stainless steel, polished (US) left Supplied With Wood screws Machine screws Note Additional sizes and finishes are available - Please contact Häfele for details. AH.

11 For Interior Doors StarTec For flush interior wood doors - 3D Adjustable Suitable for left-hand or right-hand installation H2 9 (3 3/") Door weight: kg (99 lbs.) with 2 hinges 60 kg (1 lbs.) with 3 hinges Opening angle: 180º Door width: 900 mm ( 3 7/16 ) Door height: 2000 mm ( 78 3/ ) 20 mm ( 82 11/16 ) use hinges Door thickness: mm (1 1/ ) Adjustability: Continuously three dimensional adjustable Height ± 2. mm (3/ ), Lateral +3 mm/-2 mm (+1/8 /-1/16 ) On contact ± 1 mm (1/ ) Mounting 23.3 (1/16") Material: Zinc Die-cast Finish satin chrome satin nickel gold polished (1/16") 31 (1 3/16") 31 (1 3/16") ( 3 7/16") 3 Note When using the receiving element the milling dimensions may change. 2 (1") 9 (3 3/") 60 (2 3/8") 23.3 (1/16") H7 Photo depicts LH or RH reverse. Mounting 20 (2/") 29 (1 /") (/") 6 (1/") 6 (1/") 0 (1 9/16") 900 (3 7/16") (/") 112 ( 3/8") 91 (3 19/") (1 /") (1 /") 1.6 (/8") 6 (1/") 31 Door weight: 0 kg (1 lbs.) with 2 hinges 70 kg (1 lbs.) with 3 hinges Opening angle: 180º Door width: 900 mm ( 3 7/16 ) Door height: 2700 mm ( 8 /16 ) 200 mm ( 7 1/2 ) use hinges Door thickness: 0 mm (1 9/16 ) Adjustability: Continuously three dimensional adjustable Height ± 3.0 mm (1/8 ), Lateral +3 mm/-2 mm (+1/8 /-1/16 ) On contact ± 1 mm (1/ ) Material: Zinc Die-cast Finish Item No satin chrome satin nickel gold polished Note When using the receiving element the milling dimensions may change. 112 ( 3/8") 70 (2 3/") 29 (1 /") AH.11 1/1

12 StarTec H2 and H7 Suitable for left-hand or right-hand installation 6 (2 3/16") Receiving Element For H2 133 ( 1/") For concealed hinge H2 installed into a wood door frame Material: Zinc Die-cast (3/") Note When using the receiver the milling dimensions may change. Mounting Trim 3 Door 6 (2 3/16") Receiving Element For H7 For concealed hinge H7 installed into a wood door frame Mounting Trim 1 ( 11/16") 3 7 (1/") Door Material: Zinc Die-cast Note When using the receiver the milling dimensions may change. AH.12

13 StarTec H2 and H7 Hinge Jig For milling the cut-outs of concealed hinges H2/H7 Suitable for H H Supplied With 1 Bar 2 Routing templates Router Bit For milling of concealed hinges H2/H7 Router bit Ø: 12 mm (1/2 ) Suitable for H H (1 11/16") 90 (3 3/16") 12 (1/2") Ø12 (1/2") Ø AH.13

14 For Interior Doors - Used in door frames made out of hollow metal or wood for flush doors Maintenance-free slide bearings Suitable for LH and RH applications TE 20 3D 18 (11/16") 11.7 (7/16") 21 (13/16") 1 (6 1/8") 27 (1 1/16") 9 Door weight: 0 kg (88 lbs.) Door thickness: 0 mm (1 9/16 ) Opening angle: 180º Router bit Ø: 16 mm (/8 ) Router guide Ø: 30 mm (1 3/16 ) Adjustment: three-dimensionally adjustable: Height and Width: ± 3 mm (1/8 ) Depth: ± 1. mm (1/16 ) Material: Aluminum Die-cast Finish stainless steel effect satin chrome colored satin nickel colored black powder-coated bronze powder-coated (USB look) rustic umber colored satin nickel plated polished nickel plated polished brass plated Mounting 18 (11/16") 27 (1 1/16") 21 (13/16") (1/16") (1 1/16") 16 (/8") 18 (11/16") Mounted to a wood door frame 21 (13/16") 3 2 (1/16") 27 (1 1/16") 16 (/8") Mounted to a hollow metal frame with a receiver element 18 (11/16") 21 (13/16") 18 (11/16") (1/16") (1 1/16") Mounted to a wood door jamb together with a mounting plate 16 (/8") 18 (11/16") 1 (6 1/8") 1 ( 3/16") 18 (3/") 3 21 (13/16") 16 (/8") 120 ( 3/") 12 ( 9/16") 1 (6 1/8") Milling template for a wood door frame 2 (1/16") 3 1 (9/16") Mounting plates page.21 Receiving elements page.22 2 ( 1/16") 1/1 AH.1

15 For Interior Doors - Used in door frames made out of hollow metal or wood for flush doors Maintenance-free slide bearings Suitable for LH and RH applications UL listed for 20 minute rated fire doors (maximum door size: x 8 for a single door, 8 x 8 for a pair of doors) TE 30 3D Door weight: 80 kg (176 lbs.) Door thickness: 0 mm (1 9/16 ) Opening angle: 180º Router bit Ø: 2 mm (1/16 ) Router guide Ø: 30 mm (1 3/16 ) Adjustment: three-dimensionally adjustable: Height and Width: ± 3 mm (1/8 ) Depth: ± 1.0 mm (1/16 ) 28 (1 1/8") 17. (11/16") 28 (1 1/8") 160 (6 /16") 3 (1 /16") 9 Material: Aluminum Die-cast Finish stainless steel effect satin chrome colored satin nickel colored black powder-coated bronze powder-coated (USB look) rustic umber colored satin nickel plated polished nickel plated polished brass plated white powder-coated RAL Mounting 28 (1 1/8") 3 (1 /16") 28 (1 1/8") 28 (1 1/8") ( 1 1/2") 33. (1 /16") 33. (1 /16") 28 (1 1/8") Mounted to a wood door frame 1 (1/16") Mounted to a hollow metal frame with a receiver element 28 (1 1/8") 28 (1 1/8") Mounting plates page.21 Receiving elements page (1 /16") Mounted to a wood door jamb together with a mounting plate 28 (1 1/8") 160 (6 /16") 138 ( 7/16") 131 ( 3/16") AH.1 1 (9/16") 28 (1 1/8") 138 ( 7/16") 160 (6 /16") Milling template for a wood door frame 31. Calculation of the milling dimensions: A = Rabbet depth excluding seal clearance B = Door thickness A B + 3 = Dimension X The result has to fall between 3 mm (1/8 ) and maximum mm (3/16 ). For hollow metal frame applications X = mm (3/16 ) 1/1

16 - TE 26 3D and TE 27 3D Used in door frames made out of hollow metal or wood for flush doors Maintenance-free slide bearings Suitable for LH and RH applications UL listed for minute rated fire doors 9 Door weight: 120 kg (26 lbs.) Door thickness: 3 mm (1 3/8 ) Opening angle: 180º Router bit Ø: 19 mm (3/ ) Collar ring Ø: 2. mm (1 ) Adjustment: three-dimensionally adjustable: Height and Width: ± 3 mm (1/8 ) Depth: ± 1.0 mm (1/16 ) 1 (6 1/8") TE 26 3D Material: Stainless Steel; Finish: satin TE 27 3D Material: Steel; Finish: stainless steel look (1") 1 26 (19/") (1") 33 (1 /16") Mounting (/") 12 (1/2") 33 (1 /16") 26 (1") 1 (1 /8") 26 (1") AH (1 /16") (1 /16") (1 1/") 3. (1 1/") 26 (1") (/") Mounted to a wood door frame Mounted to a hollow metal frame with a receiver element 26 (1") (/") 26 (1") 33 (1 /16") 3.. (1 1/") Mounted to a wood door jamb together with a mounting plate 26 (1") (/") 11 ( 1/2") 26 (1") (1/2") (/") 2 (") 1 (6 1/8") Milling template for a wood door frame. (1 1/") (/") 6 (1/") Mounting plates page.21 Receiving elements page.22

17 For Interior Doors - Used in door frames made out of hollow metal or wood for flush doors Maintenance-free slide bearings Suitable for LH and RH applications UL listed for 20 minute rated fire doors (maximum door size: x 8 for a single door, 8 x 8 for a pair of doors) TE 0 3D 16. (/8") 200 (7 7/8") 3 (1 /16") 9 Door weight: 120 kg (26 lbs.) Door thickness: 0 mm (1 9/16 ) Opening angle: 180º Router bit Ø: 2 mm (1/16 ) Router guide Ø: 30 mm (1 3/16 ) Adjustment: three-dimensionally adjustable: Height and Width: ± 3 mm (1/8 ) Depth: ± 1.0 mm (1/16 ) Material: Aluminum Die-cast Finish stainless steel effect satin chrome colored satin nickel colored black powder-coated bronze powder-coated (USB look) rustic umber colored satin nickel plated polished nickel plated polished brass plated Mounting (7 7/8") 170 (6 11/16") 17 (6 3/16") 18 (11/16") 19 (3/") 17 (6 3/16") 170 (6 11/16") 200 (7 7/8") 3. 3 (1 3/8") (1 3/8") 2 ( 1 /8") 3 (1 3/8") (1 3/8") 36. Mounted to a wood door frame 1 (1/16") Mounted to a hollow metal frame with a receiver element Mounting plates page.21 Receiving elements page (1 3/8") (1 3/8") Mounted to a wood door jamb together with a mounting plate AH.17 Milling template for a wood door frame 3. (1 3/8") Calculation of the milling dimensions: A = Rabbet depth excluding seal clearance B = Door thickness A B + 3 = Dimension X The result has to fall between 3 mm (1/8 ) and maximum mm (3/16 ). For hollow metal frame applications X = mm (3/16 ) 1/1

18 For Interior Doors - Used in door frames made out of hollow metal or wood for flush doors with an additional up to 8 mm (/16 ) thick surface applied panel Maintenance-free slide bearings Suitable for LH and RH applications UL listed for 20 minute rated fire doors (maximum door size: x 8 for a single door, 8 x 8 for a pair of doors) TE 0 3D A8 Door weight: 0 kg (220 lbs.) Door thickness: 0 mm (1 9/16 ) Opening angle: 180º Router bit Ø: 2 mm (1/16 ) Router guide Ø: 30 mm (1 3/16 ) Adjustment: Three-dimensionally adjustable: Height and width: ± 3 mm (1/8 ) Depth: ± 1.0 mm (1/16 ) 2. (1") 200 (7 7/8") 9 3 (1 /16") 27 (1 1/16") Material: Aluminum Die-cast Finish stainless steel effect satin chrome colored satin nickel colored black powder-coated bronze powder-coated (USB look) satin nickel plated polished nickel plated polished brass plated (1 11/16") Mounting 200 (7 7/8") 170 (6 11/16") 17 (6 3/16") 18 (11/16") 19 (3/") 17 (6 3/16") 170 (6 11/16") 200 (7 7/8") 92 (3 /8") 1/1 8 (/16") 8 (/16") AH.18 1 (1 /8") 3. 1 (1 /8") 3. 8 ( 1 7/8") 1 (1 /8") 3. (1 11/16") Mounted to a wood door frame 1 (1 /8") 3. (1 11/16") Mounted to a hollow metal frame with a receiver element 8 (/16") 8 (/16") 8 (/16") 1 (1 /8") 3. 1 (1 /8") 3. (1 11/16") Mounted to a wood door jamb together with a mounting plate 8 (/16") Milling template for a wood door frame 1. (1 /8") Mounting plates page.21 Receiving elements page.22

19 For Interior Doors - Used in door frames made out of hollow metal or wood for flush doors Maintenance-free slide bearings Suitable for LH and RH applications UL listed for 20 minute rated fire doors (maximum door size: x 8 for a single door, 8 x 8 for a pair of doors) TE 60 3D 16. (/8") 20 (9 7/16") 9 3 (1 /16") Door weight: 200 kg (0 lbs.) Door thickness: 0 mm (1 9/16 ) Opening angle: 180º Router bit Ø: 2 mm (1/16 ) Router guide Ø: 30 mm (1 3/16 ) Adjustment: three-dimensionally adjustable: Height and Width: ± 3 mm (1/8 ) Depth: ± 1.0 mm (1/16 ) Material: Aluminum Die-cast Finish stainless steel effect satin chrome colored satin nickel colored black powder-coated bronze powder-coated (USB look) satin nickel plated polished nickel plated polished brass plated Mounting 18 (11/16") 19 (3/") 20 (9 7/16") 2 (8 1/") 197 (7 3/") 197 (7 3/") 2 (8 1/") 20 (9 7/16") 3. 3 (1 3/8") (1 3/8") 2 (1 /8") 3 (1 3/8") (1 3/8") 36. Mounted to a wood door frame 1 (1/16") Mounted to a hollow metal frame with a receiver element Mounting plates page.21 Receiving elements page (1 3/8") 3 (1 3/8") 36. Mounted to a wood door jamb together with a mounting plate AH.19 Milling template for a wood door frame 3. (1 3/8") Calculation of the milling dimensions: A = Rabbet depth excluding seal clearance B = Door thickness A B + 3 = Dimension X The result has to fall between 3 mm (1/8 ) and maximum mm (3/16 ). For hollow metal frame applications X = mm (3/16 ) 1/1

20 For Interior Doors - Used in door frames made out of hollow metal or wood for flush doors with an additional up to 8 mm (/16 ) thick surface applied panel Maintenance-free slide bearings Suitable for LH and RH applications UL listed for 20 minute rated fire doors (maximum door size: x 8 for a single door, 8 x 8 for a pair of doors) TE 60 3D A8 Door weight: 160 kg ( lbs.) Door thickness: 0 mm (1 9/16 ) Opening angle: 180º Router bit Ø: 2 mm (1/16 ) Router guide Ø: 30 mm (1 3/16 ) Adjustment: three-dimensionally adjustable: Height and Width: ± 3 mm (1/8 ) Depth: ± 1.0 mm (1/16 ) 2. (1") 3 (1 /16") 20 (9 7/16") 9 3 (1 /16") Material: Aluminum Die-cast Finish stainless steel effect satin chrome colored satin nickel colored black powder-coated bronze powder-coated (USB look) satin nickel plated polished nickel plated polished brass plated (1/") (1 1/2") 3. (1 11/16") Mounting 20 (9 7/16") 2 (8 1/") 197 (7 3/") 18 (11/16") 19 (3/") 197 (7 3/") 2 (8 1/") 20 (9 7/16") 92 (3 /8") 16 (/8") 1/1 8 (/16") 8 (/16") AH.20 1 (1 /8") 3. 1 (1 /8") 3. 8 (1 7/8") 1 (1 /8") 3. (1 11/16") 1 (1 /8") 3. (1 11/16") 8 (/16") Mounted to a wood door frame Mounted to a hollow metal frame with a receiver element 8 (/16") 8 (/16") 1 (1 /8") 3. 1 (1 /8") 3. (1 11/16") Mounted to a wood door jamb together with a mounting plate 8 (/16") Milling template for a wood door frame 1. (1 /8") Mounting plates page.21 Receiving elements page.22

21 Mounting Plates Suitable for concealed hinges TE 20/30/2/0/60 3D and TE 0/60 3D A8 mounted into wood door jambs Suitable for left-hand and right-hand installations 80 (3 1/8") 80 (3 1/8") 70 (2 3/") 70 (2 3/") 80 (3 1/8") 239. (9 7/16") 200 (7 7/8") 160 (6 /16") 12 ( 7/8") 160 (6 /16") 127 (") 180 (7 1/16") 3. 3 ( 1/16") 16 (6 1/8") 196. (7 3/") TE 20 3D FZ/1 TE 30 3D FZ/1 TE 2 3D FZ/1 TE 0 3D FZ/1 TE 60 3D FZ/1 18 (7 /16") 80 (3 1/8") TE 1 3D FVZ FZ/1 1 (6 1/8") hinges pages Material: Steel, galvanized Model TE 20 3D FZ/ TE 30 3D FZ/ TE 2 3D FZ/1 for TE 26 3D and TE 27 3D TE 0 3D FZ/ TE 60 3D FZ/ TE 1 3D FVZ FZ/ Supplied With Mounting plate 2 Spacer plates per 0., 1, 2, 3 mm Note TE 2 comes without 0. mm spacer plates AH.21 1/1

22 Receiving Elements - For TE 20/30/26/27/0/60 3D/3D A8 and 1 3D FVZ mounted onto hollow metal frames Suitable for left-hand and right-hand installations Material: Steel, galvanized Model A B TE 20 3D SZ 20 (8 1/16 ) 26 (1 ) TE 30 3D SZ 2 (8 1/ ) 3 (1 /16 ) TE 26 3D SZ 20 (8 1/16 ) 3. (1 /16 ) TE 27 3D SZ 20 (8 1/16 ) 3. (1 /16 ) TE 0 3D SZ 28 (9 3/ ) 38 (1 1/2 ) TE 0 3D A8 SZ 20 (9 13/16 ) 3 (1 11/16 ) TE 1 3D FVZ SZ 23 (9 1/ ). (1 3/ ) TE 60 3D SZ 288 (11 1/16 ) 38 (1 1/2 ) TE 60 3D A8 SZ 290 (11 7/16 ) 3 (1 11/16 ) (1 1/16") 21.8 (7/8") (1 3/8") 29 (1 1/8") 33. (1 /16") 3. (1 11/") 29 (1 /") 38. (1 1/2") 33 (1 /16") 38. (1 1/2") 33 (1 /16") 38. (1 1/2") 33 (1 /16") 38. (1 1/2") 33 (1 /16") 162 (6 3/8") TE 20 3D SZ 168 (6 /8") TE 30 3D SZ 16 (6 7/16") TE 26 3D SZ TE 27 3D SZ 192 (7 9/16") TE 1 3D FVZ SZ 208 (8 3/16") TE 0 3D SZ 208 (8 3/16") TE 0 3D A8 SZ 28 (9 3/") TE 60 3D SZ 28 (9 3/") TE 60 3D A8 SZ hinges pages AH.22 1/1

23 Routing Templates - For milling of TE 20/30/26/27/0/60 3D, 0/60 3D A8 and 1 3D FVZ Router bit Ø: 12.7 mm (1/2 ) for the TE 20 and 19 mm (3/ ) for all other models Collar ring Ø: 2. mm (1 ) for all other models Suitable for Jig for milling hinge into TE 20 3D door jamb TE 30 3D door and jamb, part door and jamb, part TE 26 3D TE 27 3D door and jamb TE 0 3D door and jamb, part door and jamb, part door and jamb, part TE 0 3D A8 door and jamb, part door and jamb, part door and jamb, part TE 1 3D FVZ door and jamb, part door and jamb, part TE 60 3D door and jamb, part door and jamb, part door and jamb, part TE 60 3D A8 door and jamb, part door and jamb, part Universal Routing Frame Used to hold the routing templates in place during the milling process 1 frame frames with connecting bar hinges pages TE 26/27 3D Drilling Jig For drilling the mounting holes Supplied With Drilling jig Drill bit Ø3 mm AH.23 1/1

24 Concealed Mortise Mounted Power Transfer Device The concealed power transfer provides the means to transfer electrical power from the frame to the door leaf Well suited for high abuse areas as conduit is concealed when door is closed UL listed for use on fire doors 9 (3 3/") max. when installed 22 (7/8") from outside face of door Reinforcement 0.0 (1/18") 16 GA min. 6 (1/") 17 (21/") 16 (/8") dia. thru to wire channel 230 (9 1/16") 213 (8 3/8") 16 (/8") for frame 197 (7 3/") 6 (1/") 6 (1/") 2 (1") dia. 16 (/8") for door min. Frame 19 (3/") Door (Open 180 ) Metal Door or Frame Prep (side View) 1 (1 /8") Wood Door or Frame Prep (Side View) Model # PT1 AH.2 Works with doors hung on butt hinges and 3/ (19 mm) offset pivots wires (2 AWG) 180 degrees maximum swing Material: Metal Finish brushed aluminum Supplied With Wood screws Machine screws Note 1 3/ ( mm) minimum door thickness required. Door and frame require special machining per templates. Not for use with: Swing Clear Hinges, Pocket Pivots, larger than 6 (12 mm), Butt Hinges, 1 1/2 Offset Pivots or Center Hung Pivots.

25 Concealed Jamb Door Closer For flush wood and hollow metal doors and frames, not suitable for falling and rising hinges Closing speed and latch action are adjustable Non-handed Cycle test: endurance ested to 00,000 cycles UL B, UL C and UL 228 approved ANSI/BHMA A16. approved Conforms to ADAto meet barrier free applications 98 (3 27/") 22 (7/8") 91 (3 19/") ( 1/2") 179 (7 1/16") 98 (3 27/") 30 (1 3/16") º 98 (3 27/") ( 1/2") 28 (1 3/") 28 (1 3/") 30 ( 12") 18 (7 9/") 3 16 (6 1/2") 16 (/8") 9 (1 1/16") 2. (3/") 200 (7 7/8") Perko Power Maximum door weight: 80 kg (17 lbs.) Maximum door width: 96 mm (38 ) Door thickness: 1 1/2 1 3/ (38 mm) Opening angle: º Material: Anchor and Face Plates: Solid Brass Closer Links: 316 Stainless Steel Finish polished brass polished chrome satin chrome Supplied With Mounting screws Note Closer should be mounted within 12 (30 mm) from a door hinge. To comply with fire testing closer should be mounted within 30 (762 mm) from the base of the door. For doors with an opening angle larger then º a door stop has be installed. Mounting Bracket For mounting of concealed jamb door closer to hollow metal door frames Material: Raw Steel AH.2

26 Concealed Jamb Door Closer (2 1/8") 26 (1 1/16") 12 ( 19/") 1 (9/16") 38 (1 1/2") (7/8") Perko Powder-coated mechanism housing Precision-engineered chain Tested up to 00,000 cycles Suitable for fire-rated doors; UL approved, listing mark 8R6 Maximum door opening angle: 130º (for larger openings a door stop should be installed) Suitable for door weights uo to: 0.8 kg (112 lbs.) Minimum door thickness: 38 mm (1 1/2 ) Mounting instructions are supplied with each closer Material: Brass; Anchor Plates: Solid Brass Finish polished polished chrome satin chrome Supplied With Mounting screws Perkomatic Mechanism housed in a light-weight aluminum casing Factory-set smooth controlled rate of closure The sealed hydraulic mechanism can be adjusted to provide the desired latching action Precision-engineered chain ensures smooth and lasting service Designed and tested to 00,000 cycles Suitable for fire-rated doors; UL and cul approved, listing mark 8R6 Suitable for left and right handed applications Suitable for door weights of up to 7 kg (16 lbs.) Minimum door thickness 38 mm (1 1/2 ) Max. door width: 80 mm (33 7/16 ) Maximum door opening angle 130º (for larger openings a door stop should be installed) Material: Brass; Anchor and Face Plates: Solid Brass Finish polished polished chrome satin chrome Distance between centers of fixing plates must not exceed mm 26 (1 1/16") 60 (2 3/8") 26 (1 1/16") 31 Door thickness min. 38 mm (1 1/2") 60 (2 3/8") 168 (6 39/6") (/") 123 ( 7/8") 123 ( 7/8") (6 39/6") (2 11/6") (/") (/") Supplied With Mounting screws Mounting instructions Note Closer cannot be used on doors hung on, projecting, rising or falling butt hinges 60 (2 3/8") AH.26

27 Page No. Page No Important This catalog is intended for exclusive use by the recipient. No part of this publication may be distributed in any form to direct competitors of Häfele. Häfele retains complete ownership of this catalog. Häfele reserves the right to demand the return of this catalog in any case where it is employed for purposes of unfair competition. Reproduction of this catalog, either wholly or in part, or reprinting of any drawing or copying of the layout, are strictly forbidden. The technical data and dimensions contained in the drawings are nonbinding and are subject to design improvement. Häfele accepts no liability for any typographical or other type of error which may occur in the production of this catalog. All merchandise is furnished subject to Häfele s official Terms and Conditions of Sale. January, Häfele America Co. All rights reserved. Printed in USA. n1

TECTUS Concealed Hinges

TECTUS Concealed Hinges Concealed Hinges index TE 240 3d up to 40 kg (88 lbs) 6 TE 340 3d up to 80 kg (176 lbs) 7 TE 525 3d up to 120 kg (264 lbs) 8 TE 526 3d up to 120 kg (264 lbs) 9 TE 527 3d up to 120 kg (264 lbs) 10 TE 540

More information

Call Call

Call Call Check out Closet & Shelving Check out Storage & Convenience Hinges & Pivots Template Butt Hinge Non-Ball Bearing For medium weight doors of average frequency. All hinges have template screw hole location

More information

Lift-off hinge. Rising hinge. Standard hinge. Heavy duty hinge. Parliament hinge. Spring hinge. Double action spring hinge. Concealed mortise hinge...

Lift-off hinge. Rising hinge. Standard hinge. Heavy duty hinge. Parliament hinge. Spring hinge. Double action spring hinge. Concealed mortise hinge... Door Hinges Contents Butt hinges Lift-off hinge Rising hinge Standard hinge Heavy duty hinge Parliament hinge Spring hinge Double action spring hinge Concealed hinges Concealed mortise hinge... Pivot

More information

Simplex. Hinges GENERAL INFORMATION DETERMINE TYPE OF HINGE

Simplex. Hinges GENERAL INFORMATION DETERMINE TYPE OF HINGE GENERAL INFORMATION DETERMINE TYPE OF HINGE What is the door material (wood, stainless, fiber glass, or hollow metal)? What is the frame material (wood, stainless steel, channel iron, or hollow metal)?

More information

LCN 2030 SERIES FEATURES CONCEALED (IN 1 3/4 HEADER) MOUNTING. The concealed 2030 Series. PACER is a heavy duty closer. designed to fit in a narrow,

LCN 2030 SERIES FEATURES CONCEALED (IN 1 3/4 HEADER) MOUNTING. The concealed 2030 Series. PACER is a heavy duty closer. designed to fit in a narrow, CONCEALED (IN 1 3/4 HEADER) MOUNTING The concealed 2030 Series PACER is a heavy duty closer designed to fit in a narrow, minimum 1 3/4 aluminum transom. The single lever arm and roller assembly provide

More information

Stainless Steel Continuous Hinges

Stainless Steel Continuous Hinges General Information CONTINUOUS BENEFITS Security Because Hager Companies 790 Series Stainless Steel Continuous Hinges eliminate the gap between the door and frame, doors cannot be pried open. Energy Savings

More information

Pivot Sets & Components

Pivot Sets & Components Pivot Sets & Components PIVOT SETS & COMPONENTS CONTENTS LM Pivot Sets & Components Overview Technical Details & Specifications Applications/Application Drawings 4 Component Drawings 9 Pocket Pivots 6

More information

Door Hinges Contents. Butt hinges. Drill-in hinges. Lift-off hinge Butt hinge rising Standard hinge Parliament hinge...3.

Door Hinges Contents. Butt hinges. Drill-in hinges. Lift-off hinge Butt hinge rising Standard hinge Parliament hinge...3. Door Hinges Contents Butt hinges Lift-off hinge...10 Butt hinge rising...11 Standard hinge...12 Parliament hinge...19 Heavy duty hinge...20,.24 Accessories for hinges...21 Butt hinge with receiver...22

More information

Checkmate Stops & Holders

Checkmate Stops & Holders Auxiliary Door Control for Wall and Door Protection General Information Introduction Overhead stops are used to protect door assemblies. They cut down the wear and tear of frequency, closing mechanisms,

More information

BALL BEARING HINGES. StANLEy ARcHItEctuRAL HARdwARE

BALL BEARING HINGES. StANLEy ARcHItEctuRAL HARdwARE BALL BEARING HINGES StANLEy ARcHItEctuRAL HARdwARE STANLEY ARCHITECTURAL HARDWARE TABLE OF CONTENTS Page Table of contents...2 Company history...2 5 knuckle hinge design...3 Full mortise hinges...4-5 Half

More information

BUTT HINGES HINGES PIVOTS. Manufacturer Product Product No. Product Description Item No.

BUTT HINGES HINGES PIVOTS. Manufacturer Product Product No. Product Description Item No. BUTT 81 F179 F179 Hinge; Product No. F179; standard weight; plain bearing; for medium weight low frequency wood or metal doors; steel. 3-1/2 x 3-1/2 ; US3; bright brass finish 007660 3-1/2 x 3-1/2 ; US10A;

More information

Pivot Sets and Components DORMA LM

Pivot Sets and Components DORMA LM Pivot Sets and Components DORMA LM Pivot Sets and Components Whatever your pivot requirements, turn to DORMA and put the weight of your door on our pivots. DORMA s commitment to quality is your assurance

More information

StANLEy ARCHItECtuRAL HARDwARE CONCEALED BEARING HINGES. SAH007_3 Knuckle Concealed Bearing Hinges_FINAL.indd 1

StANLEy ARCHItECtuRAL HARDwARE CONCEALED BEARING HINGES. SAH007_3 Knuckle Concealed Bearing Hinges_FINAL.indd 1 StANLEy ARCHItECtuRAL HARDwARE CONCEALED BEARING HINGES SAH007_3 Knuckle Concealed Bearing Hinges_FINAL.indd 1 STANLEY ARCHITECTURAL HARDWARE TABLE OF CONTENTS Page Table of contents...2 Company history...2

More information

HAGER HINGE Full Mortise Hinges

HAGER HINGE Full Mortise Hinges 1279 Plain Bearing Standard Weight Template For use on medium weight doors requiring low frequency service (not for use with door closer). 2 x 2 51 x 51 0.083 4 2 1 /2 x 2 1 /2 64 x 64 0.089 6 3 x 3 76

More information

CONCEALED BEARING HINGES. StANLEy ARCHItECtuRAL HARDwARE

CONCEALED BEARING HINGES. StANLEy ARCHItECtuRAL HARDwARE CONCEALED BEARING HINGES StANLEy ARCHItECtuRAL HARDwARE STANLEY ARCHITECTURAL HARDWARE TABLE OF CONTENTS Page Table of contents...2 Company history...2 5 knuckle concealed bearing design...3 Full mortise

More information

EFCO Optional Hardware

EFCO Optional Hardware LOCKING HARDWARE ADAMS RITE MS+1890 DEADLOCK/LATCH LOCK Aluminum faceplate Five-ply laminated steel hook bolt with 13 16" throw Center-ply Alumina-Ceramic core defeats hacksaws, including rod-type super

More information

McKINNEY Hinge Catalog ElectroLynx Hinge (QC Option)

McKINNEY Hinge Catalog ElectroLynx Hinge (QC Option) ElectroLynx Hinge (QC Option) The McKinney ElectroLynx Hinge is an intermediate connector which passes a constant flow of current between the source of power (jamb) and the actuated devices in the door

More information

9540 SERIES FEATURES SINGLE DOOR, SURFACE MOUNT (PUSH) OFFSET PIVOT/BUTT HINGE

9540 SERIES FEATURES SINGLE DOOR, SURFACE MOUNT (PUSH) OFFSET PIVOT/BUTT HINGE SINGLE DOOR, SURFACE MOUNT (PUSH) OFFSET PIVOT/BUTT HINGE The 9540 SENIOR SWING by LCN is an ADA door operator that is a two-in-one swing door operator. SENIOR SWING operators when activated, opens doors

More information

Overhead Holders & Stops

Overhead Holders & Stops Manufacturing, Inc. Hospital Push/Pull Latches Electro-Magnetic Door Holders Electrical Power Transfer Products Aluminum Continuous Geared Hinges Stainless Steel Continuous Pin & Barrel Hinges Stainless

More information

PUSH BAR EXIT DEVICES CROSS BAR EXIT DEVICES NARROW STILE EXIT DEVICES FEATURING LCWD STRIKES... 20

PUSH BAR EXIT DEVICES CROSS BAR EXIT DEVICES NARROW STILE EXIT DEVICES FEATURING LCWD STRIKES... 20 Door Closers Section TABLE OF CONTENTS EXIT DEVICES PUSH BAR EXIT DEVICES N1500 Heavy Duty Rim Exit Device N1550 Rim Exit Device... 6 N1650 Fire Rated Heavy Duty Exit Device N1700(F) Vertical Rod Heavy

More information

10 Line. Specifications. Certification Compliance. Stocking Part # s

10 Line. Specifications. Certification Compliance. Stocking Part # s 10 Line For Doors 1-3/4 (44mm) thick door adjusts to 2 (51mm) standard Backsets 2-3/4 (70mm) standard Cylindrical Housing Steel, zinc dichromate finish Strike Wrought brass, bronze and stainless steel

More information

STAINLESS STEEL CONTINUOUS HINGES

STAINLESS STEEL CONTINUOUS HINGES STAINLESS STEEL ONTINUO HINGES HINGES ID stainless steel hinges are full height piano hinges that provide support for the full height of the door. For doors up to 600 lbs. Self-drilling screws standard,

More information

DC5000 Series. Cam Action Door Closer

DC5000 Series. Cam Action Door Closer Series Cam Action Door Closer Introduction Table of Contents Introduction...2 Features... 3 Mountings... 4 Accessories... 5 How to Order... 6 Quick Codes... 6 Helpful Terms... 7 Specifications... 8 Applications

More information

PUSH BAR EXIT DEVICES CROSS BAR EXIT DEVICES NARROW STILE EXIT DEVICES FEATURING LCWD STRIKES... 20

PUSH BAR EXIT DEVICES CROSS BAR EXIT DEVICES NARROW STILE EXIT DEVICES FEATURING LCWD STRIKES... 20 Hinges Section TABLE OF CONTENTS EXIT DEVICES PUSH BAR EXIT DEVICES N1500 Heavy Duty Rim Exit Device N1550 Rim Exit Device... 6 N1650 Fire Rated Heavy Duty Exit Device N1700(F) Vertical Rod Heavy Duty

More information

Overhead Concealed Door Closer DORMA RTS88

Overhead Concealed Door Closer DORMA RTS88 Overhead Concealed Door Closer DORMA RTS88 Table of Contents Specifications.................................. Technical Details................................ 4 Application Drawings Side Load Packages

More information

Hinges for Flush Doors. Hinges for Flush Doors

Hinges for Flush Doors. Hinges for Flush Doors index ULTIMATE 2D up to 80 kg 4 MILLENNIUM 2D up to 80 kg 5 COLUMBUS 3D up to 80 kg 6 Butt Hinge B 4030 S up to 120 kg 7 Butt Hinge B 4030 R up to 120 kg 8 SAMSON up to 100 kg 9 Universal milling frame

More information

Doors, Doorjambs, Number of hinges and door sizes. Guide to Ordering. Moddica s Telescopic Jig. Finish Codes

Doors, Doorjambs, Number of hinges and door sizes. Guide to Ordering. Moddica s Telescopic Jig. Finish Codes 01 01 02 03 Finish Codes Guide to Ordering Moddica s Telescopic Jig s, s, Number of hinges and door sizes 04 06 07 08 Handing of Moddica Hinges Mortise size and dimension tolerances Hinge Spacing and Clearances,

More information

Sliding and Folding Door Fittings Folding Door Fittings

Sliding and Folding Door Fittings Folding Door Fittings Bifold door fitting Silent 0/A Features For large wall units or cabinets as well as for dividing panels Simple installation with no routering or grooving necessary Maximum running performance due to running

More information

Residential Hinges RESIDENTIAL HINGES

Residential Hinges RESIDENTIAL HINGES Residential Hinges Hager residential hinges enhance the design of any home, with finishes that range from bright brass and antique bronze to satin nickel and bright chrome. Homeowners also gain additional

More information

Overhead Concealed Closers. Frame Head Concealed Closers Designed for Aluminum, Hollow Metal, or Wood Doors and Frames

Overhead Concealed Closers. Frame Head Concealed Closers Designed for Aluminum, Hollow Metal, or Wood Doors and Frames Overhead Concealed Closers Frame Head Concealed Closers Designed for Aluminum, Hollow Metal, or Wood Doors and Frames Table of Contents General Information... 3 Options... 4 Certifications... 4 Limited

More information

Spokane Hardware Supply, Inc.

Spokane Hardware Supply, Inc. Cabinet Catches Furniture Components Piano Hinges Wood Accessories Cabinet Lighting CONTINUOUS HINGES - MEDIUM GAUGE 1-1/4" & 1-1/2" Wide:.040 gauge. 2" Wide:.045 gauge Use with #4/#5screws, not included.

More information

SECTION 4. Fire-Rated Pre-assembled Doors:

SECTION 4. Fire-Rated Pre-assembled Doors: SECTION 4 Fire-Rated Pre-assembled Doors: Table of Contents 3070 Fire-Rated Door System Description & Dimensions 4070 Fire-Rated Door System Description & Dimensions 6070 Fire-Rated Door System Description

More information

GLYNN=JOHNSON. Overhead Door Holders/Stops. Ift

GLYNN=JOHNSON. Overhead Door Holders/Stops. Ift GLYNN=JOHNSON. Overhead Door Holders/Stops 4 41 Ift I Overhead Door Holders/Stops Overhead Door Controls The best door control device is one that operates overhead, with an arm functioning from the jamb

More information

BTS80. Floor Concealed Door Closers

BTS80. Floor Concealed Door Closers BTS80 Floor Concealed Door Closers BTS80 SERIES FLOOR-CONCEALED DOOR CLOSER Dependable and Versatile Floor-Concealed Closer The BTS80 Series of floorconcealed door closers offers adaptability to almost

More information

4310ME SERIES FEATURES HINGE (PULL) SIDE MOUNTING

4310ME SERIES FEATURES HINGE (PULL) SIDE MOUNTING HINGE (PULL) SIDE MOUNTING The 4310ME SENTRONIC is a heavy duty, electrically controlled closer/holder designed to provide infinitely adjustable hold-open for fire and smoke barrier doors. Door is held

More information

Door Hinges Information

Door Hinges Information Information Hinge groups The hinges in this catalogue are divided into the following groups: - are not installed in the door frame or door panel, but screwed onto the door construction and frame construction.

More information

Overhead Concealed Door Closer DORMA RTS88

Overhead Concealed Door Closer DORMA RTS88 Overhead Concealed Door Closer DORMA RTS88 Overhead Concealed Door Closer The RTS88 is capable of accommodating doors weighing up to a maximum of 250 pounds. The closer can handle exterior doors up to

More information

422 Toll Free: (800) Phone: (718) Fax: (718) RIXSON Pivots and Pivot Sets. Exclusive Rixson Features.

422 Toll Free: (800) Phone: (718) Fax: (718) RIXSON Pivots and Pivot Sets. Exclusive Rixson Features. Exclusive Rixson Features Economy RIXSON Pivots and Pivot Sets Vertical adjustment provides for field adjustment of the door if required. (On most models) Pivots provide longer life and more trouble-free

More information

Stainless Steel Continuous Hinges

Stainless Steel Continuous Hinges Stainless Steel Continuous Hinges Hager heavy duty stainless steel continuous hinges offer proven reliability that can stand up to the daily rigors of high-traffic, high-impact areas. They re designed

More information

Surface Applied Door Closers DORMA TS93

Surface Applied Door Closers DORMA TS93 Surface Applied Door Closers DORMA TS93 DORMA TS93 Surface Applied Door Closers The TS93 System in Contur Design represents the pinnacle of surface applied closers because of its unique cam and roller

More information

Hinges Closers Panic Devices Wall Stops Master keyed cylinders for hollow metal doors Thresholds Weatherstripping

Hinges Closers Panic Devices Wall Stops Master keyed cylinders for hollow metal doors Thresholds Weatherstripping SECTION 08700-1 of 8 08700.01 GENERAL A. Description 1. The extent of finish hardware is shown on the drawings. Finish hardware is hereby defined to include all items known commercially as builder's hardware,

More information

700/900. Stops & Holders

700/900. Stops & Holders 700/900 Stops & Holders 700/900 STOPS & HOLDERS CONTENTS 700/900 Series Stops & Holders Features 3 Ordering Guide 4 Applications 5 Technical Drawings 700 Standard Duty Surface Applied 6 710 Standard Duty

More information

Hinges / Concealed hinges. Concealed hinge 90. LH or RH options. A full product data sheet is available on our website.

Hinges / Concealed hinges. Concealed hinge 90. LH or RH options. A full product data sheet is available on our website. oncealed hinges oncealed hinge 90 LH or RH options. full product data sheet is available on our website. part number material finish weight 30. 1.5 70-1-358 steel zinc plated 78g LH or RH options. full

More information

Sliding Door Hardware

Sliding Door Hardware Sliding Door Hardware Hager Companies offers a full line of high quality, durable sliding door hardware that is the perfect choice for any by-pass, bi-fold, or pocket door application your project requires.

More information

Stops and Holders DORMA 700/900

Stops and Holders DORMA 700/900 Stops and Holders DORMA 700/900 DORMA 700/900 Stops and Holders DORMA Architectural Hardware offers a line of versatile stops and holders. This line complements our existing full range of door closers,

More information

SECTION 6. Glass Storefront Doors:

SECTION 6. Glass Storefront Doors: SECTION 6 Glass Storefront Doors: Table of Contents 3070 Storefront Door System Description & Dimensions 6070 Storefront Door System Description & Dimensions Door Leaf Detail Optional 10 Bottom Rail Detail

More information

Overhead Concealed Closers

Overhead Concealed Closers Overhead Concealed Closers Introduction Rixson Overhead Concealed closers offer an aesthetically appealing way to close a door. In situations where a closer is needed but concealment is required, Rixson

More information

Contents. Royde & Tucker Hinges Royde & Tucker Pivots Sets 478. Royde & Tucker Door Stops 479. ARRONE Plus Hinges

Contents. Royde & Tucker Hinges Royde & Tucker Pivots Sets 478. Royde & Tucker Door Stops 479. ARRONE Plus Hinges Hinges Hinges Contents Royde & Tucker Hinges 468-477 Royde & Tucker Pivots Sets 478 Royde & Tucker Door Stops 479 ARRONE Plus Hinges 480-481 ARRONE Hinges 482 ARRONE Spring Hinges 48-484 46 Hinges Royde

More information

ARC-53 Floor Spring DC250 and DC

ARC-53 Floor Spring DC250 and DC Door Hardware 2 Index 3 Overhead and Concealed Door Closers ARC-51N Overhead Concealed Door Closer and Springless Pivot...4 ARC-55 KN Surface Mounted Door Closer...6 ARC-55 KV Variable Spring Surface Mounted

More information

4000 SERIES SURFACE MOUNTED CLOSERS

4000 SERIES SURFACE MOUNTED CLOSERS 4000 SERIES SURFACE MOUNTED CLOSERS Product Selection Guide Surface mounted 4000 Series LCN closers feature a modern design engineered for each application, easy installation, and superior performance.

More information

Locks. Mortise locks for entrance and internal doors

Locks. Mortise locks for entrance and internal doors Locks Mortise locks for entrance and internal doors Products of the G.U-Group for doors Content Mortise safety locks 2154 2124 2174 2114 Page 10 Page 12 Page 12 Page 14 0024 6031 6206 6043 Page 16 Page

More information

Overhead Concealed Door Closer DORMA RTS88

Overhead Concealed Door Closer DORMA RTS88 Overhead Concealed Door Closer DORMA RTS88 Table of Contents Specifications.................................. Technical Details................................ 4 Application Drawings Side Load Packages

More information

Hinges. Concealed hinges. Concealed hinge 90 opening

Hinges. Concealed hinges. Concealed hinge 90 opening oncealed hinges oncealed hinge 90 opening Pins and links in 430 stainless steel Mounting features: - For nested doors or surface mounted doors. - LH or RH options. - For horizontal or vertical applications.

More information

Exclusive Glass Door Hardware by Izerwaren.Com

Exclusive Glass Door Hardware by Izerwaren.Com Exclusive Glass Door Hardware by Izerwaren.Com BRASS PLATED GLASS DOOR LATCHES for 3/8 to 1/2 inch thick glass 316 STAINLESS STEEL GLASS DOOR HINGES for 3/8 to 1/2 inch thick glass Wall to glass hinge

More information

Aluminum Geared Hinges

Aluminum Geared Hinges XY Series Hinges Table Of Contents page General Information.... 3-5 How to Order... 6 Clearance Requirements.... 7 026XY Full Mortise - Narrow Frame Leaf, Wide Door Leaf.... 8 027XY Full Mortise - Wide

More information

*4110 HCUSH mount shown

*4110 HCUSH mount shown *PARALLEL ARM (PUSH SIDE) MOUNT 4110 SERIES The 4110 is LCN s best performing heavy duty closer designed specifically for institutional and other rugged high traffic applications. n Cast Iron n Extra Duty

More information

EFCO Standard Hardware

EFCO Standard Hardware LOCKING HARDWARE DEAD BOLT LOCK Designed for aluminum entrances Five-ply laminated steel bolt with concealed hardened steel pin provides maximum security for any single leaf door 1 1 8" backset is standard

More information

*4110 HCUSH mount shown

*4110 HCUSH mount shown *PARALLEL ARM (PUSH SIDE) MOUNT The 4110 is LCN s best performing heavy duty closer designed specifically for institutional and other rugged high traffic applications. n Cast Iron n Extra Duty Forged Steel

More information

SECTION 3. Masonry Pre-assembled Doors:

SECTION 3. Masonry Pre-assembled Doors: SECTION 3 Masonry Pre-assembled Doors: Table of Contents 3070 Masonry Door System Description & Dimensions 4070 Masonry Door System Description & Dimensions 6070 Masonry Door System Description & Dimensions

More information

Fax Visit us on the web at McKINNEY McKINNEY McKINNEY McKINNEY McKINN

Fax Visit us on the web at  McKINNEY McKINNEY McKINNEY McKINNEY McKINN 1-800-321-9602 Fax 1-800-328-6070 McKINN 2 Knuckle Hinges Oil Impregnated Bearing (TA) Ball Bearing (TB) Plain Bearing McKinney Products Company provides the non-residential construction industry with

More information

Aluminum Geared Hinges

Aluminum Geared Hinges XY Series Hinges Table Of Contents page General Information................................................ 3-5 How to Order......................................................... 6 Clearance Requirements..............................................

More information

Overhead Door Holders and Stops

Overhead Door Holders and Stops Overhead Door Holders and Stops Hager overhead are utilized to control and protect door assemblies. By providing a high quality product with an adjustable arm to simplify installation, Hager Companies

More information

135H/150H Series Medium & Wide Stile Heavy Wall Storefront Doors

135H/150H Series Medium & Wide Stile Heavy Wall Storefront Doors 135H/150H Series Medium & Wide Stile Heavy Wall Storefront Doors MANKO WINDOW SYSTEMS, INC. 800 HAYES DRIVE MANHATTAN, KANSAS 66502 PHONE: (800) 642-1488 (785) 776-9643 FAX: (800) 576-2656 (785) 776-9644

More information

Tubular Latches. 3 a. Heavy Duty Lever Latches Series HLL Tubular Latch Parts

Tubular Latches. 3 a. Heavy Duty Lever Latches Series HLL Tubular Latch Parts 3 Tubular Latches 3 a 3 b Heavy Duty Lever Latches Series HLL Tubular Latch Parts 2014 05 2014 05 3 Tubular Latches 3 a 3 4 6 8 12 14 Heavy Duty Lever Latches Series HLL Features Ordering String Functions

More information

Glass Door Hinges Selection Chart

Glass Door Hinges Selection Chart Glass Door Hinges Selection Chart The Wixroyd range of glass door hinges are intended for the mounting of smaller doors and panels on cabinets and enclosures, typically their maximum load capacity is 4

More information

Organisational Kitchen Fittings Kitchen Cabinet Fittings

Organisational Kitchen Fittings Kitchen Cabinet Fittings Pull-out wire storage basket Finish: Chrome plated Load capacity: 30 kg Installation depth: 400 mm Version: Runners and baskets separated, designed for wardrobe interiors without doors Type of pull out:

More information

Escutcheons & Cylinder Shields

Escutcheons & Cylinder Shields home > products > hardware > escutcheons / cylinder shields Escutcheons & Cylinder Shields Mechanical Locks Electro-Mechanical Locks Pneumatic Locks Mortise Locks Devices & Operators Hardware Electric

More information

Locks and Strike boxes

Locks and Strike boxes 49 Perfect function and modern design provides reassuring and reliable security for today s constructions in glass. CONTENTS Technical details - 55 Materials and surface finishes 56 Product information

More information

FRAME PROFILE MASONRY METAL DOOR FRAME FLUSH MASONRY KD MITER CORNER JOINT. #8 Screw (MS002485) Required on all fire rated KD frames. Bend Tabs.

FRAME PROFILE MASONRY METAL DOOR FRAME FLUSH MASONRY KD MITER CORNER JOINT. #8 Screw (MS002485) Required on all fire rated KD frames. Bend Tabs. FRAME PROFILE MASONRY FLUSH MASONRY KD MITER CORNER JOINT Bend Tabs Head #8 Screw (MS002485) Required on all fire rated KD frames Corner Assembly 2" (50.8) Head Jamb Head Break Away Corner Clip Spot Welds

More information

Pivot and Pivot Sets. Architectural Solutions for Durable and Efficient Hanging of Doors

Pivot and Pivot Sets. Architectural Solutions for Durable and Efficient Hanging of Doors Pivot and Pivot Sets Architectural Solutions for Durable and Efficient Hanging of Doors TABLE OF CONTENTS General Information... 4 How to Select Product... 5 Options... 6 Certifications... 6 Limited Warranty...

More information

Stainless Steel Continuous Hinges

Stainless Steel Continuous Hinges Stainless Steel Continuous Hinges Hager heavy duty continuous hinges offer proven reliability that can stand up to the daily rigors of high-traffic, high-impact areas. They re designed and engineered to

More information

1131 Series. Door Closers

1131 Series. Door Closers 1131 Series Door Closers Table of Contents General Information.... 1 Applications... 2 Applications & Accessories... 3 Architectural Specifications... 4 Any retrofit or other field modification to a fire

More information

COMMERCIAL MORTISE Locks - page 1

COMMERCIAL MORTISE Locks - page 1 LEVER STYLES AVAILABLE DUKE MORTISE TRIM ENVOY MORTISE TRIM FEATURES cul listed for use on 3-hour Fire Door (Single or Double Doors) Conforms fully to BHMA/ANSI 156.13 Grade 1, including Operational, Strength

More information

COVER CYLINDER **ARM FUNCTION ACCESSIBILITY NON-HANDED NON-SIZED

COVER CYLINDER **ARM FUNCTION ACCESSIBILITY NON-HANDED NON-SIZED STOP FACE (PUSH SIDE) MOUNT The 4110T is LCN s best performing heavy duty track closer designed specifically for interior doors in institutional and other high traffic applications. n Cast Iron n Forged

More information

96 Hinge. Lift-off. Type A. Allows for quick, easy door removal All metal construction. Type B. Material and Finish. Part Number

96 Hinge. Lift-off. Type A. Allows for quick, easy door removal All metal construction. Type B. Material and Finish. Part Number 96 Hinge Lift-off 347 6.35 19.1 (.75) Ø 6.35 31.7 (1.25) 25.4 (1.00) 19.1 (.75) 6.35 6.35 25.4 (1.00) 19.1 (.75) 31.7 (1.25) Ø 6.35 19.1 (.75) 6.35 ll metal construction Steel, zinc plated or stainless

More information

Magnetic Catch IPS INDUSTRIAL PROFILE SYSTEMS. Catalog 1816 Hardware

Magnetic Catch IPS INDUSTRIAL PROFILE SYSTEMS. Catalog 1816 Hardware Magnetic Catch 800--9-06 1 Holding Force X 0 N (. lb) Y 10 N (. lb) -01 1 Mounting on 0 series profile Mounting on 8 series profile Assembly of the Double Bracket 0 on 0 series profile Holding force of

More information

ACCESSIBILITY NON-HANDED NON-SIZED

ACCESSIBILITY NON-HANDED NON-SIZED TOP JAMB (PUSH SIDE) MOUNT 4020 SERIES The 4020 is LCN s best performing heavy duty closer designed specifically for institutional and other rugged high traffic applications. n Cast Iron n Forged Steel

More information

25 Series 3 /4" Offset For Exterior or Interior Doors. 27 Series 3 /4" Offset For Exterior or Interior Doors

25 Series 3 /4 Offset For Exterior or Interior Doors. 27 Series 3 /4 Offset For Exterior or Interior Doors OFFSET HUNG FLOOR CLOSERS All offset hung floor closers are single acting and handed 3 /4" offset floor closers locate the pivot point 3 /4" from the heel edge of the door and 3 /4" from the face of the

More information

Continuous Hinge [1.5mm] to 0.50 [12.7mm] 1/4 [6.3mm] to 2.0 [50mm], 1/2 [12.7mm] is the most common. 72 [1828mm], 84 [2133mm] & 96 [2438mm]

Continuous Hinge [1.5mm] to 0.50 [12.7mm] 1/4 [6.3mm] to 2.0 [50mm], 1/2 [12.7mm] is the most common. 72 [1828mm], 84 [2133mm] & 96 [2438mm] HINGE CATALOG Continuous Hinge Typical hinge properties Gauge: Open Width: Pin Diameter: Knuckle Length: Standard Lengths: Standard Materials: Standard Finishes: 0.02 [0.5mm] to 0.250 [6.3mm] 0.75 [19mm]

More information

SPECIAL HINGES / ACCESSORIES

SPECIAL HINGES / ACCESSORIES SPECIAL HINGES / ACCESSORIES The DORMA stainless steel hinge for internal glass doors stands out for its optical features determined by function. Various special hinges also for door situations independent

More information

*HINGE (pull) side mount shown

*HINGE (pull) side mount shown CLOSER MOUNTS *HINGE (PULL) SIDE TOP JAMB (PUSH SIDE) PARALLEL ARM (PUSH SIDE) LCN 4040 SERIES The 4040 SUPER SMOOTHEE is LCN s most flexible heavy duty closer designed for institutional and other rugged

More information

Universal ARCOS EA. Patch Fittings

Universal ARCOS EA. Patch Fittings Universal ARCOS EA Patch Fittings Product range 4 5 DORMA Universal 6 25 ARCOS Universal 26 33 DORMA EA 34 39 Accessories 40 50 Metric/English Conversion Guide 51 3 DORMA Product Range DORMA Patch fittings

More information

SECTION TOILET PARTITIONS. A. Section Structural Steel: Supports for ceiling hung compartments.

SECTION TOILET PARTITIONS. A. Section Structural Steel: Supports for ceiling hung compartments. SECTION 10155 TOILET PARTITIONS PART 1 GENERAL 1.1 SECTION INCLUDES A. High pressure plastic laminate toilet compartments. 1.2 RELATED SECTIONS A. Section 05120 - Structural Steel: Supports for ceiling

More information

ABLOY DOOR CLOSERS Exactly the right choice

ABLOY DOOR CLOSERS Exactly the right choice ABLOY DOOR CLOSERS Exactly the right choice R ABLOY DOOR CLOSERS SUPERIOR PERFORMANCE AND RELIABILITY ABLOY high security products are known and highly-respected all over the world. Every item in our wide

More information

Architectural Hardware Design Guide High-performance hardware for the most demanding architectural applications

Architectural Hardware Design Guide High-performance hardware for the most demanding architectural applications 08710/STA BuyLine Architectural Hardware Design Guide High-performance hardware for the most demanding architectural applications Architectural Hardware Design Guide The full range of Stanley hinges provides

More information

Timely is pleased to provide the following information, and wishes to thank you for your interest in our Timely line of products

Timely is pleased to provide the following information, and wishes to thank you for your interest in our Timely line of products Timely is pleased to provide the following information, and wishes to thank you for your interest in our Timely line of products Learning Objectives Identify the benefits of Prefinished Frames versus jobsite

More information

Commercial Door/ Storefront Hardware

Commercial Door/ Storefront Hardware Mortise Locks deadlatch Deadbolt Hookbolt Function: Deadbolt, Hookbolt, Deadlatch Backset: 31/32", 1-1/8", 1-1/2" Face Plate: 1"W x 6-7/8" L - Aluminum Case Dimensions: 7/8"W x 6"L x Depth specific to

More information

Plugging Boxes are available in many sizes for floor and wall installations.

Plugging Boxes are available in many sizes for floor and wall installations. PLUGGING BOXES are available in many sizes for floor and wall installations. Cole provide protected enclosures for electrical devices in floors and walls. They are suitable for both high and low voltage

More information

SECTION 0810 HOLLOW METAL DOORS AND FRAMES. 1. Hollow metal doors. 2. Pressed steel frames as follows: a. Frames for hollow metal doors.

SECTION 0810 HOLLOW METAL DOORS AND FRAMES. 1. Hollow metal doors. 2. Pressed steel frames as follows: a. Frames for hollow metal doors. SECTION 0810 HOLLOW METAL DOORS AND FRAMES PART 1.00 - GENERAL 1.01 SCOPE OF WORK: A. WORK INCLUDED: The Contractor shall furnish all materials, labor, equipment and services necessary to fabricate, furnish,

More information

McMahon and Company's. Hollow Metal Doors & Frames. Commercial Price Pages

McMahon and Company's. Hollow Metal Doors & Frames. Commercial Price Pages McMahon and Company's Hollow Metal Doors & Frames Commercial Price Pages 1800 Series Hollow Metal Doors 1800 SERIES 1800 SERIES 18 GAUGE 18 GAUGE DOOR SIZES SEAMLESS DOOR SIZES SEAMLESS **Stock 2/0 X 6/8

More information

Cabinet & Drawer Hardware

Cabinet & Drawer Hardware www.crh.com.au SOLUTIONS FOR TRDE Cabinet & Drawer Hardware www.crh.com.au SOLUTIONS FOR TRDE CONTENTS Page 3 Page 4 5 Page 6 8 Page 9 10 Page 11 12 Page 13 14 Page 15 Page 16 18 Page 19 Page 20 CRH Series

More information

RTS88. Overhead Concealed Door Closer

RTS88. Overhead Concealed Door Closer RTS88 Overhead Concealed Door Closer RTS88 OVERHEAD CONCEALED CLOSER DORMA RTS88 OVERHEAD CONCEALED DOOR CLOSER Invisible door control Dependable and easy to install Architects are often challenged to

More information

FIRE DOORS FIBERGLASS & STEEL SYSTEMS

FIRE DOORS FIBERGLASS & STEEL SYSTEMS FIBERGLASS & STEEL SYSTEMS JELD-WEN Fire Door Systems are engineered to conform to either 90-minute or 20-minute fire codes. Unmatched adjustability, ease of installation and reliability distinguish the

More information

Height Ft (m) Height In. (mm) For 1-3/4-In. (44.5-mm) or Thicker Doors

Height Ft (m) Height In. (mm) For 1-3/4-In. (44.5-mm) or Thicker Doors BUTT HINGES Table 28A of the National Fire Protection Association (NFPA) handbook No. 80 sets forth the minimum quantity, size and weight (thickness) for swinging fire doors. Table 28A also stipulates

More information

STANLEY DOOR CLOSERS D-4550/D-4551 D-4550 / D-4551 SERIES OOR CLOSERS

STANLEY DOOR CLOSERS D-4550/D-4551 D-4550 / D-4551 SERIES OOR CLOSERS STANLEY DOOR CLOSERS D-4550/D-4551 D-4550 / D-4551 SERIES OOR CLOSERS 1 GENERAL INFORMATION TABLE OF CONTENTS Page General Information... 2 4 How To Order...4 Standard (Pull) Application...5 Parallel Arm

More information