High Quality Made in Germany

Transcription

1 High Quality Made in Germany

2 10 CES mortise locks Narrow frame n heavy duty version lockcase galvanized, above and below closed n with special two-turndead-bolt n without striking plate n reversible n less 30 mm backset: one-turn bolt space 15 mm n 30, 35, mm backset: special two-turn bolt space 25 mm n distance: 92 mm follower: 8 mm forend: galvanized, silver lacquered; stainless steel; plastic coated latch bolt: steel nickel plated dead bolt: steel nickel plated CES mortise lock 5434 CES mortise lock , 30, 35, 40, 45 mm backset forend 24 x 255 mm edged with transmission bar prepared for profile cylinders 30, 35, 40, 45 mm backset forend 24 x 255 mm edged prepared for profile cylinders with roller bolt

3 11 CES mortise lock , 30, 35, 40, 45 mm backset forend 24 x 160 mm edged prepared for profile cylinders only dead bolt CES mortise lock 5834 medium version 20, 25, 30, 35, 40, 45 mm backset forend 24 x 245 mm edged with transmission bar prepared for profile cylinders only one turn bolt space 15 mm

4 Industrial building mortise lock series 3.. DIN class 3 Available types of lock operation Features 8 mm FIX clamp follower Medium duty version Steel latch bolt and steel dead bolt Tender specifications Industrial building mortise lock according to DIN class 3, medium duty design, closed galvanized lock case, 8 mm cast steel FIX clamp follower, all internal parts protected against corrosion, hardened counterspring, steel latch bolt and steel dead bolt 310 Single tumbler lock, without latch lever, 72 mm centre distance, with 1 nickel-plated lever key no Prepared for profile cylinders, with latch lever, 72 mm centre distance 390 For toilet/bathroom doors, 78 mm centre distance, 8 mm escutcheon follower Subject to errors and technical alterations.

5 Industrial building mortise lock series 3.. DIN class 3 Lock designs Lock operation Lever key (BB) Profile cylinder with Bathroom set latch lever (PZW) Part no Centre distance Turn 2 turn 2 turn 1 turn es 55 / 60 / 65 / 70 / 80 mm other backsets upon request Forend Lacquered, nickel-silver Stainless steel, satin Brass, polished colour Latch bolt / dead bolt Nickel-plated Nickel-plated Nickel-plated Forend width Rebated door Flush door Shape 18 / 20 mm 24 mm Square / rounded Standard striking plates Rebated door 0400 Angular striking plate Flush door 0522 Flat striking plate Options Latch-bolt damping, Delrin roller latch (FD) Sound damping (GD) Crank latch, with Delrin crank (KF) Forend extension (dimension X) Inclined forend High dead bolt Latch snib (FF) KABA perforation with 74 mm centre distance Bushed follower Latch bolt only Dead bolt only Bathroom set Rebated door Flush door CESlocks

6 Mortise latch lock series 3.. DIN class 3 Available types of lock operation Features 8 mm cast steel follower Medium duty version Cast steel latch bolt Tender specifications Mortise latch lock, medium duty version, values and fitting dimensions according to German standard DIN class 3, 8 mm cast steel follower, hardened counterspring, all internal parts protected against corrosion, cast steel latch bolt Door handle operation only Prepared for profile cylinders, with latch lever, 72 mm centre distance Subject to errors and technical alterations.

7 Mortise latch lock series 3.. DIN class 3 Lock designs Lock operation Handle Profile cylinder with latch lever (PZW) Part no Centre distance 72 es 55 / 60 / 65 / 70 / 80 mm, other backsets upon request Forend Lacquered, brass colour Stainless steel, satin Brass, polished Latch bolt / dead bolt Electrogalvanized Polished nickel-plated Polished nickel-plated Options All-brass design (GM) (55-65 mm backset) Forend extension (dimension X) Latch snib (FF) 9 mm follower Forend width Rebated door Flush door Shape 18 / 20 mm 24 mm Square / rounded Standard striking plates Rebated door 0445 Angular striking plate Flush door 0504 Flat striking plate Rebated door Flush door CESlocks

8 Mortise latch lock series 25.. with small lock case Features Cast steel follower Steel latch bolt Tender specifications 2500 Mortise latch lock for residential applications, with small lock case, lock case and cover galvanized, 8 mm cast steel follower, all internal parts electroplated, hardened counterspring, steel latch bolt Subject to errors and technical alterations.

9 Mortise latch lock series 25.. with small lock case Lock design Lock operation Door handle Part no es 55 / 60 / 65 / 70 / 80 mm, other backsets upon request Forend Lacquered, nickel-silver Stainless steel, satin Brass, polished colour Latch bolt Nickel-plated Nickel-plated Nickel-plated Options Latch-bolt damping, Delrin roller latch (FD) Crank latch, with Delrin crank (KF) Latch snib (FF) FIX clamp follower 9 mm follower Forend width Rebated door Flush door Shape 20 mm 24 mm Square / rounded Standard striking plates Rebated door 0445 Angular striking plate Flush door 0504 Flat striking plate Rebated door Flush door CESlocks

10 Special mortise lock series 35.. with lockable latch bolt Available types of lock operation Features Cast steel latch bolt Tender specifications Mortise lock for residential applications, with lockable latch bolt, lock case and cover lacquered with hammer-finish paint, all internal parts protected against corrosion, 8 mm cast steel follower, hardened counterspring, cast steel latch bolt, internal case width 10 mm, 55 mm backset 3534 Prepared for profile cylinders, with latch lever, 72 mm centre distance 3590 For toilet/bathroom use, 78 mm centre distance, 8 mm Delrin escutcheon follower Subject to errors and technical alterations.

11 Special mortise lock series 35.. with lockable latch bolt Lock designs Lock operation Profile cylinder with Bathroom set latch lever (PZW) Part no Centre distance Options All-metal design (GM) 55 mm only es Forend Latch bolt / dead bolt Stainless steel, satin Polished nickel-plated Forend width Rebated door Flush door Shape 20 mm 24 mm Square / rounded Standard striking plates Rebated door 0445 Angular striking plate Flush door 0504 Flat striking plate Bathroom set Rebated door Flush door CESlocks

12 Mortise dead lock series 3.. DIN class 3 Available types of lock operation Features Medium duty version Metal dead bolt with steel core Tender specifications Mortise dead lock, medium duty version, values and fitting dimensions according to German standard DIN class 3, closed galvanized lock case, all internal parts protected against corrosion, two-turn metal dead bolt with steel core Single tumbler lock, with 1 nickelplated lever key no Prepared for profile cylinders For toilet/bathroom doors, 8 mm escutcheon follower Subject to errors and technical alterations.

13 Mortise dead lock series 3.. DIN class 3 Lock designs Lock operation Lever key (BB) Profile cylinder (PZ) Bathroom set Part no Turn 2 turn 2 turn 1 turn 55 / 60 / 65 / 70 / 80 mm, other backsets upon request es Forend Lacquered, brass colour Stainless steel, satin Brass, polished Latch bolt / dead bolt Electrogalvanized Polished nickel-plated Polished nickel-plated Options All-brass design (GM) (55-65 mm backset) Forend extension (dimension X) KABA perforation Forend width Rebated door Flush door Shape 18 / 20 mm 24 mm Square / rounded Standard striking plates Flush door 0507 Striking plate Flush door 0508 Striking plate Bathroom set Rebated door Flush door CESlocks

14 Mortise dead lock series 27.. with small lock case Available types of lock operation Features Steel dead bolt Tender specifications Mortise dead lock for residential applications, with small lock case, lock case and cover galvanized, steel dead bolt 2710 Single tumbler lock, with 1 nickelplated lever key no Prepared for profile cylinders 2700 For toilet/bathroom doors, 8 mm escutcheon follower Subject to errors and technical alterations.

15 Mortise dead lock series 27.. with small lock case Lock design Lock operation Lever key (BB) Profile cylinder (PZ) Bathroom set Part no Turn 2 turn 2 turn 1 turn 55 / 60 / 65 / 70 / 80 mm es Forend Lacquered, nickel-silver Stainless steel, satin Brass, polished colour Latch bolt Nickel-plated Nickel-plated Nickel-plated Forend width Rebated door Flush door Shape not available 20 / 24 mm Square / rounded Standard striking plates Flush door 0507 Angular striking plate Flush door 0508 Flat striking plate Bathroom set CESlocks

16 Glass door mortise lock series 40.. with fitting dimensions according to DIN Available types of lock operation Features 8 mm cast steel follower Steel latch bolt and steel dead bolt Tender specifications Glass door mortise lock with fitting dimensions according to German standard DIN , galvanized lock case and galvanized internal parts, 8 mm cast steel follower, steel latch bolt, steel dead bolt 4014 Single tumbler lock, with latch lever, 72 mm centre distance, with 1 nickel-plated lever key no Prepared for profile cylinders, with latch lever, 72 mm centre distance Subject to errors and technical alterations.

17 Glass door mortise lock series 40.. with fitting dimensions according to DIN Lock designs Lock operation Lever key with Profile cylinder with latch lever (BBW) latch lever (PZW) Part no Centre distance Turn 2 turn 2 turn 25 / 30 / 35 / 40 / 45 mm Options Forend extension (dimension X) es Forend Lacquered, nickel-silver Stainless steel, satin Brass, polished colour Latch bolt / dead bolt Nickel-plated Nickel-plated Nickel-plated Forend width Rebated door Flush door Shape 20 mm 24 mm square / rounded Standard striking plates Rebated door 0400 Angular striking plate Flush door 0522 Flat striking plate Rebated door Flush door CESlocks

18 Swing door mortise lock series 45.. with large lock case Available types of lock operation Features Brass roller Steel latch bolt and steel dead bolt Tender specifications Swing door mortise lock for residential applications, case and cover and all internal parts protected against corrosion, brass roller, roller latch infinitely variable adjustable, cast steel roller latch, steel dead bolt 4530 Prepared for profile cylinders Subject to errors and technical alterations.

19 Swing door mortise lock series 45.. with large lock case Lock design Lock operation Profile cylinder (PZ) Part no Turn es 2 turn 55 / 60 / 65 / 70 / 80 mm, other backsets upon request Forend Lacquered, nickel-silver Stainless steel, satin Brass, polished colour Roller latch / holder Nickel-plated Nickel-plated Nickel-plated Options For toilet/bathroom use with 8 mm escutcheon follower With lever key (BB) insert Forend width Rebated door Flush door Shape not available 20 / 24 mm Square / rounded Standard striking plate Flush door 0510 Striking plate with groove * Adjustable from 4 to 9 CESlocks

20 Swing door mortise lock series 47.. with small lock case Available types of lock operation Features Brass roller Cast steel roller holder Tender specifications Swing door mortise lock for residential applications, galvanized case and cover, all internal parts protected against corrosion, cast steel roller latch holder, 4700 Roller latch only, 61 mm full width, matching striking plate no with groove 4710 Single tumbler lock, with 1 nickelplated lever key no. 0905, lockable roller latch, matching striking plate no without groove 4730 Prepared for profile cylinders, lockable roller latch, matching striking plate no 0511 without groove 4790 For toilet/bathroom use, 8 mm escutcheon follower, lockable roller latch, matching striking plate no 0511 without groove Subject to errors and technical alterations.

21 Swing door mortise lock series 47.. with small lock case Lock design Lock operation None Profile cylinder (PZ) Bathroom set Part no Lockable No Yes Yes Turn 1 turn 1 turn 55 mm (locks with locking mechanism) es Forend Lacquered, nickel-silver Stainless steel, satin Brass, polished colour Roller latch / holder Nickel-plated Both nickel-plated Both nickel-plated Forend width Rebated door Flush door Shape not available 24 mm Square / rounded Standard striking plates Flush door 0511 Striking plate with groove Note: For locks with locking mechanism, the striking plate has no groove. adjustable from 4 to 11 Bathroom set CESlocks

22 Front-door mortise lock series 20.. Available types of lock operation Features 10 mm steel follower Steel latch bolt and steel dead bolt Tender specifications Front-door mortise lock with open, galvanized lock case, 10 mm cast steel follower, hardened counterspring, all internal parts protected against corrosion, steel latch bolt and steel dead bolt 2034 Prepared for profile cylinders, with latch lever, 92 mm centre distance Subject to errors and technical alterations.

23 Front-door mortise lock series 20.. Lock design Lock operation Profile cylinder with latch lever (PZW) Part no Centre distance 92 Turn es 2 turn 55 / 60 / 65 / 70 / 80 mm, other backsets upon request Forend Lacquered, nickel-silver Stainless steel, satin colour Latch bolt / dead bolt Nickel-plated Nickel-plated Forend width Rebated door Flush door Shape 20 / 22 / 24 mm 30 mm Square / rounded Options Latch-bolt damping, Delrin roller latch (FD) Crank latch, with Delrin crank (KF) Forend extension (dimension X) Inclined forend Latch snib (FF) mm backset Standard striking plates Rebated door 0422 Angular striking plate Flush door 0502 Flat striking plate Rebated door CESlocks

24 Industrial building mortise lock series 3.. DIN class 3 Available types of lock operation Features 8 mm FIX clamp follower Medium duty version Steel latch bolt and steel dead bolt Tender specifications Industrial building mortise lock according to DIN class 3, medium duty design, closed galvanized lock case, 8 mm cast steel FIX clamp follower, all internal parts protected against corrosion, hardened counterspring, steel latch bolt and steel dead bolt 310 Single tumbler lock, without latch lever, 72 mm centre distance, with 1 nickel-plated lever key no Prepared for profile cylinders, with latch lever, 72 mm centre distance 390 For toilet/bathroom doors, 78 mm centre distance, 8 mm escutcheon follower Subject to errors and technical alterations.

25 Industrial building mortise lock series 3.. DIN class 3 Lock designs Lock operation Lever key (BB) Profile cylinder with Bathroom set latch lever (PZW) Part no Centre distance Turn 2 turn 2 turn 1 turn es 55 / 60 / 65 / 70 / 80 mm other backsets upon request Forend Lacquered, nickel-silver Stainless steel, satin Brass, polished colour Latch bolt / dead bolt Nickel-plated Nickel-plated Nickel-plated Forend width Rebated door Flush door Shape 18 / 20 mm 24 mm Square / rounded Standard striking plates Rebated door 0400 Angular striking plate Flush door 0522 Flat striking plate Options Latch-bolt damping, Delrin roller latch (FD) Sound damping (GD) Crank latch, with Delrin crank (KF) Forend extension (dimension X) Inclined forend High dead bolt Latch snib (FF) KABA perforation with 74 mm centre distance Bushed follower Latch bolt only Dead bolt only Bathroom set Rebated door Flush door CESlocks

26 Heavy duty mortise lock series 4.. DIN class 4 Available types of lock operation Features (8 + 9 mm) FIX clamp follower High corrosion protection Steel latch bolt and steel dead bolt Steel bushings to protect against chips Tender specifications Heavy duty mortise lock according to DIN class 4, suitable for public buildings, closed galvanized lock case, all internal parts protected against corrosion, hardened counterspring, mm FIX clamp follower, steel latch bolt and steel dead bolt 410 Single tumbler lock, without latch lever, 72 mm centre distance, with 1 nickel-plated lever key no Prepared for profile cylinders, with latch lever, 72 mm centre distance 490 For toilet/bathroom doors, 78 mm centre distance, 8 mm escutcheon follower Subject to errors and technical alterations.

27 Heavy duty mortise lock series 4.. DIN class 4 Lock designs Lock operation Lever key (BB) Profile cylinder with Bathroom set latch lever (PZW) Part no Centre distance Turn 2 turn 2 turn 1 turn es 55 / 60 / 65 / 70 / 80 mm, other backsets upon request Forend Lacquered, nickel-silver Stainless steel, satin Brass, polished colour Latch bolt / dead bolt Nickel-plated Nickel-plated Nickel-plated Forend width Rebated door Flush door Shape 18 / 20 mm 24 mm Square / rounded Standard striking plates Rebated door 0400 Angular striking plate Flush door 0522 Flat striking plate Options Latch-bolt damping, Delrin roller latch (FD) Noise reduction (GD) Crank latch, with Delrin crank (KF) Forend extension (dimension X) Inclined forend High dead bolt Latch snib (FF) KABA perforation with 74 mm centre distance Bushed follower Latch bolt only Dead bolt only Bathroom set Rebated door Flush door CESlocks

28 Heavy duty mortise lock DIN class 5 Available types of lock operation Features Heavy duty version 8 10 mm FIX clamp follower Follower borne in steel rings Very high corrosion protection Steel latch bolt and steel dead bolt Steel bushings to protect against chips Tender specifications Heavy duty mortise lock according to DIN class 5, suitable for public buildings, heavy duty version, closed galvanized lock case, all internal parts protected against corrosion, heavy duty FIX clamp follower borne in steel rings, steel latch bolt and steel dead bolt 534 Prepared for profile cylinders, with latch lever, 72 mm centre distance Subject to errors and technical alterations.

29 Heavy duty mortise lock DIN class 5 Lock design Lock operation Profile cylinder with latch lever (PZW) Part no. 534 Centre distance 72 Turn es Forend Latch bolt / dead bolt 2 turn 55 / 60 / 65 / 70 / 80 mm, other backsets upon request Stainless steel, satin Nickel-plated Forend width Rebated door Flush door Shape 18 / 20 mm 24 mm Square / rounded Standard striking plates Rebated door 0400 Angular striking plate Flush door 0522 Flat striking plate Options Latch-bolt damping, Delrin roller latch (FD) Noise reduction (GD) Crank latch, with Delrin crank (KF) Forend extension (dimension X) Inclined forend Latch snib (FF) KABA perforation with 74 mm centre distance Rebated door Flush door CESlocks

30 Special mortise lock with locking latch bolt series 13.. with fitting dimensions according to DIN Available types of lock operation Features Cast steel follower Cast steel latch bolt Metal dead bolt with steel core Internal parts protected against corrosion Tender specifications Medium duty mortise lock with locking latch for residential and industrial applications, fitting dimensions according to German standard DIN 18251, closed lock case lacquered with hammer-finish paint, 8 mm follower, hardened counterspring, all internal parts protected against corrosion, cast steel latch bolt, metal dead bolt with steel core 1334 SP Prepared for profile cylinders, with latch lever, 72 mm centre distance, standard follower bearing in lock case and cover SP Latch lock, prepared for profile cylinders, with latch lever, 72 mm centre distance, standard follower bearing in lock case and cover 1734 SP Prepared for profile cylinders, with latch lever, 72 mm centre distance, follower borne in galvanized steel rings SP Latch lock, prepared for profile cylinders, with latch lever, 72 mm centre distance, follower borne in galvanized steel rings Functioning: See part no SP Subject to errors and technical alterations.

31 Special mortise lock with locking latch bolt series 13.. with fitting dimensions according to DIN Lock design Lock operation Profile cylinder Profile cylinder Profile cylinder Profile cylinder with latch lever with latch lever with latch lever with latch lever (PZW) (PZW) (PZW) (PZW) Part no SP SP 1734 SP Centre distance / 60 / 65 / 70 / 80 mm, other backsets upon request es Forend Lacquered Stainless steel, satin Brass, polished Latch bolt / dead bolt Bright nickel-plated Polished nickel-plated Polished nickel-plated Forend width Rebated door Flush door Shape 20 mm 24 mm Square / rounded Standard striking plate Flush door 0525 Flat striking plate Rebated door Flush door CESlocks

32 Special mortise lock with locking latch bolt series 25.. with small lock case Features Lock case and cover lacquered with hammer-finish paint 8 mm cast steel follower All internal parts electroplated Hardened counterspring Steel latch bolt Locking latch bolt made of die-cast zinc Tender specifications 2500 SP Medium duty mortise lock with locking latch for residential and industrial applications, with small lock case lacquered with hammerfinish paint, 8 mm follower, hardened counterspring, all internal parts electroplated Functioning Below the latch bolt, an additional locking latch is arranged that triggers the blocking mechanism. When the door is closed, both latch bolts hit the striking plate or the steel frame at first. While the main latch bolt engages the striking plate, the locking latch remains in retracted condition. This activates the blocking mechanism, and the main latch bolt can no longer be retracted from the outside. Subject to technical changes

33 Special mortise lock with locking latch bolt series 25.. with small lock case Lock design Lock operation Part no. Door handle 2500 SP 55 / 60 / 65 / 70 / 80 mm, other backsets upon request es Forend Lacquered Stainless steel, satin Brass, polished Latch bolt / dead bolt Bright nickel-plated Polished nickel-plated Polished nickel-plated Forend width Rebated door Flush door Shape 20 mm 24 mm Square / rounded Standard striking plate Flush door 0526 Flat striking plate Rebated door Flush door CESlocks

34 Mortise lock with emergency opening and integrated convenience feature Available types of lock operation Features Integrated convenience feature Mechanical latch safeguard Anti-blocking function (9534) High corrosion protection Steel latch bolt and steel dead bolt Options Latch-bolt damping, Delrin roller latch (FD) Crank latch, with Delrin crank (KF) Micro switch for permanent dead bolt interrogation Functional descriptions Convenience feature The integrated convenience feature is identical with the E-type panic latch lever function. The door is fitted with a handle on the inside and with a fixed knob on the outside. The locked door can be opened from the inside with the panic function in the lock. From the outside, the key can be used to unlock the dead bolt and to retract the latch bolt (latch lever function). Subject to errors and technical alterations.

35 Mortise locks with integrated convenience feature and additional locking latch bolt as latch safeguard Lock design US guidelines Lock operation Profile cylinder Profile cylinder Profile cylinder Profile cylinder with latch lever with latch lever (PZ) with latch lever (PZW) (PZW) (PZW) Part no Convenience feature Yes Yes Yes Yes Mechanical latch Yes Yes Yes Yes safeguard Anti-blocking function Yes Yes No No Dead bolt 2 turn 1 turn 1 turn 1 turn Required CES cylinder /41-B5 815/47-B5 55, 60, 65, 70 and 80 mm Latch safeguard (mechanical) Below the latch bolt, the latch safeguard is arranged, an additional locking latch that triggers the blocking mechanism. When the door is closed, both latch bolts hit the striking plate or the steel frame at first. While the main latch bolt engages the striking plate, the locking latch remains in retracted condition. This activates the blocking mechanism, and the main latch bolt can no longer be retracted from the outside Anti-blocking function This function was developed especially for access control situations, where knob cylinders and electronic locking cylinders are used. Thanks to a special design, the connection to the dead bolt mechanism is pulled out of the range of the follower of the cylinder in an emergency. For this reason, the dead bolt cannot be blocked by a cylinder follower standing in the way of the dead bolt throw, and the door can be opened with the door Rebated door Flush door handle. CESlocks

36 Mortise locks with emergency opening and integrated convenience feature Tender specifications 9534 Industrial building mortise lock with values and fitting dimensions according to DIN class 3, prepared for profile cylinders, with latch lever, 72 mm centre distance, with integrated convenience feature, anti-blocking function of the dead bolt and additional locking latch as mechanical latch safeguard, lock case and internal parts protected against corrosion, steel latch bolt and steel dead bolt with 20 mm throw (2 turn) 9730 Industrial building mortise lock with values and fitting dimensions according to DIN class 3, prepared for CES profile cylinder 815/41-B5 according to US guidelines, without latch lever, 72 mm centre distance, with integrated convenience feature and additional locking latch as mechanical latch safeguard, lock case and internal parts protected against corrosion, steel latch bolt and (one-turn) steel dead bolt with 20 mm throw Industrial building mortise lock with values and fitting dimensions according to DIN class 3, prepared for profile cylinders, with latch lever, 72 mm centre distance, with integrated convenience feature and additional locking latch as mechanical latch safeguard, lock case and internal parts protected against corrosion, steel latch bolt and (one-turn) steel dead bolt with 20 mm throw 9734 Industrial building mortise lock, same as 9730, with additional latch lever. CESlocks

37 Industrial building mortise lock series 6.. for wet room doors Available types of lock operation Features 8 mm follower High corrosion protection Yellow brass latch bolt Stainless metal dead bolt with brass core Bronze springs Tender specifications Industrial building mortise lock for wet room doors, all-brass version, closed lock case, all internal parts protected against corrosion, bronze counterspring, 8 mm follower, yellow brass latch bolt, stainlessmetal dead bolt with brass core 634 Prepared for profile cylinders, with latch lever, 72 mm centre distance 690 For toilet/bathroom use, 78 mm centre distance, 8 mm escutcheon follower Subject to errors and technical alterations.

38 Industrial building mortise lock series 6.. for wet room doors Lock design Lock operation Profile cylinder with Bathroom set latch lever (PZW) Part no Centre distance Turn 2 turn 1 turn 55 / 60 / 65 / 70 / 80 mm, other backsets upon request es Forend Stainless steel, satin Brass, polished Latch bolt / dead bolt Nickel-plated Nickel-plated Forend width Rebated door Flush door Shape 18 / 20 mm 24 mm Square / rounded Standard striking plates Rebated door 0400 Angular striking plate Flush door 0522 Flat striking plate Bathroom set Rebated door Flush door CESlocks

39 Special mortise lock series 80.. with three dead bolts Available types of lock operation Features lheavy duty version lhardened counterspring lsteel latch bolt and steel dead bolt Tender specifications 8030 Special mortise lock prepared for profile cylinders, without latch lever, 72 mm and 63 mm centre distance, case and cover lacquered in hammerfinish paint, 8 mm steel follower, hardened counterspring, 8 mm Delrin escutcheon follower for night bolt operation, all internal parts protected against corrosion, internal case width 10 mm, cast steel latch bolt, two-turn steel dead bolt, one-turn night bolt Subject to errors and technical alterations.

40 Special mortise lock series 80.. with three dead bolts Lock design Lock operation Profile cylinder (PZ) Part no Centre distance 72 / und 60 mm es Forend Lacquered, brass colour Stainless steel, satin Brass, polished Latch bolt / dead bolt Nickel-plated Nickel-plated Nickel-plated Forend width Rebated door Flush door Shape 20 mm 24 mm Square / rounded Options llatch-bolt damping, Delrin roller latch (FD) lnoise reduction (GD) lcrank latch, with Delrin crank (KF) llatch snib (FF) lstafix clamp follower lemergency function (only if without latch lever) Standard striking plates Rebated door 0433 Angular striking plate Flush door 0518 Flat striking plate Rebated door Flush door CESlocks

41 Lock with three dead bolts Practical application example The figure below illustrates a possible solution in buildings where one bathroom can be entered from two different rooms, for example in senior citizens' facilities, office buildings etc. In the example, we use a single knob cylinder. Description of the function: When a person uses the bathroom or the toilet, he or she locks the doors with the two thumb turns. Both doors are now locked which is indicated on the room side by the red signal in the toilet door escutcheons. When the user leaves the bathroom or the toilet, the doors are unlocked with the thumb turn. Emergency function: If the user of the bathroom and toilet has not unlocked the o pposite door when leaving the room, the toilet dead bolt of the lock can be retracted by rotating the cylinder knob on the room side so that the bathroom/toilet can be entered again. Note: The door frame must be provided with two holes for the dead bolts. CESlocks

42 Special mortise lock series 82.. for radiation protective doors, test room doors, etc. Available types of lock operation Features Offset followers and cylinder holes for 40 and 80 mm backset High corrosion protection Angular brass latch bolt One-turn dead bolt Tender specifications 8230 Special mortise lock for radiation protective doors, prepared for profile cylinders, 75 mm centre distance, 8 mm cast steel followers, with offset followers and cylinder holes for 40 and 80 backset, case and cover lacquered in hammer-finish paint, all internal parts protected against corrosion, internal case width 10 mm, hardened door handle spring, triple-guided angular brass latch bolt, one-turn dead bolt Function Dead bolt operation from both sides with key, latch bolt operation from both sides with door handle. Because of the offset backsets, half fittings and single cylinders are used since the required holes in the door leaf are not aligned. Subject to errors and technical alterations.

43 Special mortise lock series 82.. for radiation protective doors, test room doors, etc. Lock design Lock operation Profile cylinder (PZ) Part no Centre distance 75 Options Noise reduction (GD) With 1 latch lever at 40 or 80 mm backset 40 / 80 mm es Forend Latch bolt / dead bolt Stainless steel, satin Brass, nickel-plated Forend width Rebated door Flush door Shape 20 mm 24 mm Square / rounded Standard striking plates Rebated door 0400 Angular striking plate Flush door 0522 Flat striking plate Rebated door Flush door CESlocks

44 Sliding door mortise lock series 90.. with upward shoot bolt throw Available types of lock operation Features Fully electroplated M10 shoot bolt receiver Shoot bolt guide behind forend or at backset 15 mm shoot bolt throw Tender specifications Special sliding door mortise lock for operating theatre rooms, upward shoot bolt throw, with M10 stud bolt to receive the shoot bolt, all parts fully electroplated, 15 mm throw 9003 Prepared for profile cylinders, shoot bolt guide directly behind the forend, only available with 45 mm backset 9004 Prepared for profile cylinders, shoot bolt guide at backset Accessories Round bolt, electroplated, covering rail or guide plate Subject to errors and technical alterations.

45 Sliding-door mortise lock series 90.. with upward shoot bolt throw Lock design Lock operation Profile cylinder Profile cylinder Bathroom set Bathroom set (PZ) (PZ) Part no only only Shoot bolt guide Behind forend At forend Behind forend At forend Options M8 stud bolt es Forend Electroplated Stainless steel, satin Forend width Rebated door Flush door Shape not available 15 / 24 mm Square Note: When ordering covering rails, the door height must be stated. Striking plate Type 9003 Accessories Covering rail CESlocks

46 Bolt guidance for sliding door locks 9003 / 9004 As an alternative to the covering rail, a guide plate may be used which is recessed at the upper edge of the door leaf. CESlocks

47 Mortise lock for fire-rated doors single wing Available types of lock operation Features 9 mm follower High corrosion protection Cast steel latch bolt Steel dead bolt, two-turn Tender specifications 9234 Mortise door according to DIN for wooden and steel doors and fire-rated doors, closed galvanized lock case, all internal parts protected against corrosion, prepared for profile cylinders, with latch lever, 72 mm centre distance, 9 mm one-piece steel follower, hardened counterspring, cast steel latch bolt, two-turn (22 mm) steel dead bolt Subject to errors and technical alterations.

48 Mortise lock according to DIN classes 4 and 5 for single wing fire-rated doors (T30-T90) Lock design Lock operation Profile cylinder with latch lever (PZW) Part no Follower 9 mm Dead bolt 2 turn 55 and 65 mm, other backsets upon request es Class 4 Class 5 Forend Galvanized Stainless steel, satin Latch bolt / dead bolt Galvanized Nickel-plated Forend width Rebated door Flush door Shape 20 mm 24 mm Rounded Rebated door Flush door CESlocks

49 Mortise lock for fire-rated doors single wing with panic function Available types of lock operation Features 9 mm steel follower High corrosion protection Cast steel latch bolt Steel dead bolt, two-turn Tender specifications 9334 Panic mortise lock according to DIN for fire-rated doors, with panic latch lever function E (door handle inside, knob outside), closed galvanized lock case, all internal parts protected against corrosion, prepared for profile cylinders, with latch lever, 72 mm centre distance, 9 mm one-piece steel follower, hardened counterspring, cast steel latch bolt, two-turn (22 mm) steel dead bolt 9834 Panic mortise lock, same as 9334, for fitting of knob cylinders Subject to errors and technical alterations.

50 Mortise lock according to DIN EN 179 or 1125 for single wing fire-rated doors (T30-T90) Lock designs Lock operation Profile cylinder with Profile cylinder (PZ) Profile cylinder (PZ) latch lever (PZW) Part no D 9330 B Follower One-piece Split Split Panic function E D B Dead bolt 2 turn 2 turn 1 turn es Forend Latch bolt / dead bolt Stainless steel, satin Nickel-plated 65 mm, other backsets upon request Forend width Rebated door Flush door Shape 20 mm 24 mm Rounded Tender specifications 9330 D Panic mortise lock according to DIN for fire-rated doors, with panic transit function D (door handle inside, door handle outside), closed galvanized lock case, all internal parts protected against corrosion, prepared for profile cylinders, without latch lever, 72 mm centre distance, 9 mm split steel follower, hardened counterspring, cast steel latch bolt, two-turn (22 mm) steel dead bolt 9330 B Panic mortise lock according to DIN for fire-rated doors, with panic change-over function B (door handle inside, door handle outside), closed galvanized lock case, all internal parts protected against corrosion, prepared for profile cylinders, without latch lever, 72 mm centre distance, 9 mm split steel follower, hardened counterspring, cast steel latch bolt, one-turn (11 mm) steel dead bolt 9830 D Panic mortise lock, same as 9330 D, for fitting of knob cylinders Rebated door Flush door CESlocks

51 Mortise lock for fire-rated doors double wing with panic function Available types of lock operation Tender specifications Lock combinations with full panic function for double wing doors, automatic locking of the inactive door leaf 9401 Inactive door leaf The inactive door leaf and the active door leaf can be unlocked simultaneously via the inactive door leaf. The shoot bolts are automatically arrested by the switching lock. Locking is automatic by means of the switching lock. Active door leaf Inside: From the inside, the active door leaf can be locked and unlocked with the key. When the dead bolt is in locked position, the dead bolt can be retracted simultaneously with the latch bolt by operation of the door handle. Outside: On the outside of the active door leaf, a fixed knob is fitted. From Switching lock Upper shoot bolt Panic espagnolette lock Shoot bolt striking plate Fire resistant panic lock Components of the lock combinations no and 9402 Panic espagnolette lock no Switching lock no. 0705, galvanized Shoot bolt striking plate no. 0720, galvanized Shoot bolt guide plate no. 0721, galvanized Bottom keep no Upper shoot bolt no. 0710, galvanized the outside, the active door leaf can be locked and unlocked with the key. In unlocked condition, the latch can be retracted with the key via the latch Lower shoot bolt Inactive door leaf Active door leaf Lower shoot bolt no. 0711, galvanized Fire resistant panic lock no for 9401 and no B for no lever. Shoot bolt guide plate Floor striker groove Subject to errors and technical alterations.

52 Lock combinations according to DIN EN 179 or 1125 full panic function for double wing fire-rated doors (T30-T90) Lock design Panic function E B Part no Espagnolette lock Panic lock B 65 mm es Forend Stainless steel, satin Latch bolt / dead bolt Nickel-plated Forend width Rebated door Flush door Shape 20 mm 24 mm Rounded Rebated door Flush door Tender specifications 9402 Inactive door leaf The inactive door leaf and the active door leaf can be unlocked simultaneously via the inactive door leaf. The shoot bolts are automatically arrested by the switching lock. Locking is automatic by means of the switching lock. Active door leaf Inside: From the inside, the active door leaf can be locked and unlocked with the key. When the dead bolt is in locked position, the dead bolt can be retracted simultaneously with the latch bolt by operation of the door handle. The dead bolt is at this stage flush with the forend and the active door leaf is opened. The door handle on the outside is switched to idle. Outside: On the outside of the active door leaf, a door handle is fitted. From the outside, the active door leaf can be locked and unlocked with the key. When the dead bolt is in locked position or one-turn retracted (flush) position, the outside handle is idle. When the dead bolt is retracted by two turns, the latch bolt can be operated with the door handle. In this condition, the door may be passed through from the outside. CESlocks

53 Narrow stile mortise lock for single wing framed doors with panic function Available types of lock operation Features 9 mm follower High protection against corrosion Reversible latch Tender specifications 7434 Mortise lock with panic function according to DIN , class 1, for single wing framed doors, with panic latch lever function E (door handle inside, knob outside), closed lock case protected against corrosion, prepared for profile cylinders, with latch lever, 92 mm centre distance, 9 mm one-piece follower, one-turn dead bolt (15 mm) 7430 B Mortise lock with panic function according to DIN , class 1, for single wing framed doors, with panic change-over function B (door handle inside, door handle outside), closed lock case protected against corrosion, prepared for profile cylinders, without latch lever, 92 mm centre distance, 9 mm onepiece follower, one-turn dead bolt (15 mm) Subject to errors and technical alterations.

54 Narrow stile panic mortise lock according to DIN EN 179 or 1125 for single wing framed doors Lock design Lock operation Profile cylinder with Profile cylinder (PZ) latch lever (PZW) Part no B Follower one-piece split Panic function E B 30, 35 and 40 mm, other backsets upon request es Forend Stainless steel, satin Latch bolt / dead bolt Polished nickel-plated Forend width Rebated door Flush door Shape not available 24 mm Square CESlocks

55 Narrow stile mortise lock for double wing framed doors with panic function Available types of lock operation Tender specifications Lock combinations with full panic function for double wing framed doors, automatic locking of the inactive door leaf 7501 Inactive door leaf The inactive door leaf and the active door leaf can be unlocked simultaneously via the inactive door leaf. The shoot bolts are automatically arrested by the switching lock. Locking is automatic by means of the switching lock. Active door leaf Inside: From the inside, the active door leaf can be locked and unlocked with the key. When the dead bolt is in locked position, the dead bolt can be retracted simultaneously with the latch bolt by operation of the door handle. Outside: On the outside of the Switching lock Upper shoot bolt Panic espagnolette lock Shoot bolt striking plate Fire resistant panic lock Components of the lock combinations no and 7502 Panic espagnolette lock no Switching lock no. 0706, galvanized Shoot bolt striking plate no. 0722, galvanized Shoot bolt guide plate no. 0723, galvanized Bottom keep no Upper shoot bolt no. 0712, galvanized active door leaf, a fixed knob is fitted. From the outside, the active door leaf can be locked and unlocked with the key. In unlocked Lower shoot bolt Inactive door leaf Active door leaf Lower shoot bolt no. 0713, galvanized Narrow stile panic lock no for 7501 and no B for no condition, the latch can be retracted with the key via the latch lever. Shoot bolt guide plate Floor striker groove Subject to errors and technical alterations.

56 Lock combinations according to DIN EN 179 or 1125 full panic function for double wing framed doors Lock designs Lock operation Profile cylinder with Profile cylinder (PZ) latch lever (PZW) Part no Espagnolette lock Panic lock B es Forend Stainless steel, satin Latch bolt / dead bolt Polished nickel-plated 30, 35 und 40 mm Forend width Rebated door Flush door Shape not available 24 mm Square Tender specifications 7502 Inactive door leaf The inactive door leaf and the active door leaf can be unlocked simultaneously via the inactive door leaf. The shoot bolts are automatically arrested by the switching lock. Locking is automatic by means of the switching lock. Active door leaf Inside: From the inside, the active door leaf can be locked and unlocked with the key. When the dead bolt is in locked position, the dead bolt can be retracted simultaneously with the latch bolt by operation of the door handle. Outside: On the outside of the active door leaf, a fixed knob is fitted. From the outside, the active door leaf can be locked and unlocked with the key. In unlocked condition, the latch can be retracted with the key via the latch lever. CESlocks

57 Softline key section SP Patent protected key section for industrial buildings CEScylinder Schließe

58 Softline key section SP SP is a patent protected conventional key section series for industrial building applications. It has 5 or 6 nickel silver pin tumblers on each locking side. At least one housing pin and one core pin per cylinder side are made of hardened nickelplated steel. Other features include: Antipicking feature pursuant to DIN with specially designed housing pins for effective protection against picking tools. Long-term protection against unauthorized key duplication. 3 strong nickel silver keys conforming to DIN standard, with at least 11.5 mm long key shanks, suitable for commercial armatures with cylinder covering. A guiding groove over the entire cylinder core to ensure positive transfer of the key torque and prevent breaking-off of the key.

59 Softline key section SP Variants 1 Double cylinder no. 810 SP Brass, satin nickel plated Basic length: 27.5/27.5 mm 3 nickel silver keys 1 2 Double cylinder no SP Brass, satin nickel plated Basic length: 27.5/27.5 mm Locking on both sides 3 nickel silver keys 2 Single cylinder no /2 SP Brass, satin nickel plated Basic length 27.5 mm Follower adjustable in 12 positions 3 nickel silver keys 3 Knob cylinder no. 815 SP Brass, satin nickel plated Basic length 27.5/27.5 mm One side locking, the other side aluminium knob, shape H, F1 3 nickel silver keys Cam cylinder no. 5558/30 SP Brass, polished nickel plated Locking movement 90º Locking direction as desired Fitting dimension 25 mm 2 nickel silver keys 5 Cylinder padlock no. 215 N SP Stainless steel shackle Housing 58 mm wide, 50 mm high Latches without locking Shackle clearance 35 mm (standard) 2 nickel silver keys 6 6 Double cylinder no. 802/5 SP Brass, satin nickel plated Basic length 27.5/27.5 mm One side locking, the other side blind 3 nickel silver keys

60 Softline key section SP Options and extras 1 Modular SP cylinders are also available in modular design. This means that the length of these cylinders can be adapted to the thickness of the door on site by using appropriate extension parts. 2 Additional antidrilling and antipulling protection For application in particularly security relevant areas, SP cylinders can be equipped with hard-metal pins and plates in the housing and on the cylinder core face. These meet the requirements of the highest VdS classes. 3 Combination with CES electronic s Also CES electronic / motor cylinders can be provided with the protected SP key section and can thus be easily integrated in mechanical SP locking s. 4 Locking management The CESportier vision software makes the PC management of complex locking s simple. The software includes input and query functions for personnel, key, cylinder, locking function, key handout and key return data and fast order handling C.Ed.Schulte GmbH Zylinderschloßfabrik P.O. Box , D Velbert, Germany Phone +49 (0) /188 Fax +49 (0) export@ces-cylinder.de Subject to technical changes without notice SP 04/2008_VKF1020_engl

61 Conventional key section KM with trademark protection CEScylinder Schließe

62 Conventional key section KM with trademark protection Locking technology with trademark protection pursuant to DIN 18252/EN 1303 KM is a conventional key section series for industrial buildings with a special feature the KM enjoys trademark protection. The cross section of the key shank has the shape of the registered trademark CES. Unlike a patent, a trademark offers legal protection against unauthorized duplication of the original keys for an unlimited period of time. The KM is also characterized by impeccable locking precision, maximum variability and highly effective security elements. Antidrilling and antipulling protection The KM has 5, 6 or 7 nickel silver pin tumblers on each locking side. At least one housing pin and one core pin per cylinder side are made of hardened nickel-plated steel. Further features include: Antipicking feature pursuant to DIN with specially designed housing pins for effective protection against picking tools. Strong nickel silver keys conforming to DIN standard, with at least 11.5 mm long key shanks, suitable for commercial armatures with cylinder covering. A guiding groove over the entire cylinder core to ensure positive transfer of the key torque and prevent breaking-off of the key.

63 Conventional key section KM Variants 1 Double cylinder no. 810 KM 1 2 Brass, satin nickel plated Basic length: 27.5/27.5 mm 3 nickel silver keys Double cylinder no KM Brass, satin nickel plated Basic length: 27.5/27.5 mm Locking on both sides 3 nickel silver keys 2 Single cylinder no /2 KM Brass, satin nickel plated Basic length 27.5 mm Follower adjustable in 12 positions 3 nickel silver keys 3 Knob cylinder no. 815 KM Brass, satin nickel plated Basic length 27.5/27.5 mm One side locking, the other side aluminium knob, shape H, F1 3 nickel silver keys 4 Cam cylinder no. 5558/30 KM Brass, polished nickel plated Locking movement 90º Locking direction as desired Fitting dimension 25 mm 2 nickel silver keys 5 Padlock no. 215 N KM Stainless steel shackle Housing 58 mm wide, 50 mm high Latches without locking Shackle clearance 35 mm (standard) 2 nickel silver keys 6 Double cylinder no. 802/5 KM Brass, satin nickel plated Basic length 27.5/27.5 mm One side locking, the other side blind 3 nickel silver keys

64 Conventional key section KM Options and extras 1 Modular KM cylinders are also available in modular design. This means that the length of these cylinders can be adapted to the thickness of the door on site by using appropriate extension parts. 2 Additional antidrilling and antipulling protection For application in particularly security relevant areas, KM cylinders can be equipped with hard-metal pins and plates in the housing and on the cylinder core face. These meet the requirements of the highest VdS classes Combination with CES electronic s Also CES electronic / motor cylinders can be provided with the protected KM key section and can thus be easily integrated in mechanical locking s. 4 Locking management The CESportier vision software makes the PC management of complex locking s simple. The software includes input and query functions for personnel, key, cylinder, locking function, key handout and key return data and fast order handling. C.Ed.Schulte GmbH Zylinderschloßfabrik P.O. Box , D Velbert, Germany Phone +49 (0) /188 Fax +49 (0) export@ces-cylinder.de 3 Subject to technical changes without notice KM 04/2008_VKF1014_engl

65 Cabinet locks Article 3002 Espagnolette lock Function Accessories Order specifications Lock case: steel Nickel-plated For split section rod. For subsequent fitting of cylinder article 222. Including escutcheon. Fitting note: 24mm bore. 40mm Catch hooks, rod guides, striking plate, locking bolt (without rods) Figure shows right-hand lock. Please indicate door direction. Available for: RH, LH, drawer, head position. Article 3012 Rim lock Lock case: steel Nickel-plated Function For subsequent fitting of cylinder article 222. Fitting note: 24mm bore. 40mm Accessories Order specifications Nickel-plated angled striking plate Figure shows right-hand lock. Please indicate door direction. Available for: RH, LH, drawer, head position. 6