HandRail HR-LaneLED-INOX

Transcription

1 YOUR WIS IS OUR COMMAN andrail R-aneE-INOX Product information 09 15

2 Utilising Synergies Creating Safety and rails with E lighting: Increased safety in a sophisticated design As an established manufacturer of emergency lights for road and rail tunnels using E technology, we have accumulated a wealth of knowledge and know-how. Based on this experience, we are taking another step towards providing safety everywhere people go with our E-illuminated hand rails. In general A hand rail is a rail within easy reach that people can hold on to or allow themselves to be guided by. Most hand rails come in the form of posts, rails or bars. Common materials used are metal, wood, wood composites or plastic. A hand rail can be the upper part of a balustrade or railing. It can also be attached directly to a wall. Requirements A "fixed" hand rail is required by law. "Rigging", meaning hand rails made with rope, are only intended as decoration since they could give way in case of a fall. and rails should be as round as possible and have a diameter of between 20 and 45 mm. They should be continuous and ideally extend past the first and last steps of stairs. This innovation is based on different directives, such as IN 18065, information from the Swiss Competence Centre for Accident Prevention (bfu) and SUVA recommendations. It should be possible to grip them securely, they should be warm to the touch, round or oval and have a diameter between mm. They must run continuously (even in front of windows and recesses), be installed at a height of 85 to 90 cm and should extend at least 30 cm past the first and last steps of stairs. Tactile, meaning noticeable and if possible contrasting, elements should signal the beginning and end. Applications - Underpasses and overpasses in railway stations - Escape route and emergency staircases - ecorative applications in office or exhibition wings - ospitals and nursing homes - Schools and day care centres - Shopping and meeting areas - otels and restaurants 2 GIFAS-EECTRIC Gmb ietrichstrasse 2 P.O. Box C-9424 Rheineck

3 System components of the R-aneE-INOX The anee light bar as "base element" The INOX hand rail made from stainless steel V2A as "carrier element" + ifferent wall fastenings, Transition and end pieces as "assembly elements" Connection distributors and control units as "supply elements" = The symbiosis of perfected technology andrail R-aneE-INOX Metal pipe rail with integrated lighting safety and effect lighting in one Phone Fax shop.gifas.ch info@gifas.ch 3 3

4 ight bar Item no Current collector, quadripartite current collector System cable 2 x 2.5 mm 2 Item no Cable entry piece Item no System cable 2 x 2.5 mm 2 Aluminium profile E plates encapsulated, IP67 Connection cable with 2-pin plug Item no Aluminium profile Item no ateral cover E set, selection according to required lighting strength GIFAS-aneE The anee-inox light bar from GIFAS is the base element for the illuminated hand rail R-aneE INOX. The appropriate type is selected depending on the requirements of the operator, whereas the desired lighting strength is the most important specification. The other parameters of the anee are carefully defined. Item no Connection cable Current collector Each individual anee is connected to the power supply via the current collector and is freely attachable to the flat cable 2 x 2.5 mm 2. The cable bushing serves as the interface to the current collector and the connection cable with plug of the anee (IP67 connection). ight colour: 4'500-5'000 K Beam angle: 120 Protection class: IP Composition of the anee-inox The carrier profile of the anee-inox light bar consists of a special aluminium profile with special characteristics for mechanical and chemical properties. A flexible and separable E strip is inserted from below and incorporated into the AU profile with 2K casting compound. The encapsulation leads to the high protection class of IP67. There is room for the cable guide and the current collector in the upper part of the profile (in between the flanks). anee-inox light bar GIFAS anee coated with special profile AU, approx. 30 x 25 x 2'960 mm with E modules type 3-7, beam angle 120, completely ready for connection, not including assembly materials (system cable and current collector). Ø Illumination Cone of light when in use with the INOX hand rail Current collector Supply cable 2 x 2.5 mm 2 and rail Accessories anee Wall fastening element E Module Encapsulation System cable ight, black - copper plated Flat cable EPR/EPR 2 x 2.5 mm² RS current collector 2P, 42V-5A, V4A contact part connector with metal bracket, thread base plate and set screw INOX holding clamp V2A to R-aneE-INOX 4 GIFAS-EECTRIC Gmb ietrichstrasse 2 P.O. Box C-9424 Rheineck

5 ight data / Range anee INOX Technical data anee ight comparison measurements Perfect light for each application! An overview of the values that can be achieved with anee light bar type 4 to 7 follows Basis anee types 4 to 7 in a hand rail at a height of 80 cm across a 2 m wide staircase provide the following values with regard to their lighting strength. anee light bar type 4, IP67, 5'000 K, VC Item no. E W/mA ength umen ux W ma 2'997 mm 400 lm 90 ux - 95 cm W ma 1'497 mm 200 lm 90 ux - 95 cm W - 80 ma 724 mm 100 lm 90 ux - 95 cm and rail height 80 cm, stair case width 2 m, beam angle hand rail 0 : One-sided anee light bar type 6, IP67, 5'000 K, VC Item no. E W/mA ength umen ux W ma 2'997 mm 1'200 lm 250 ux - 95 cm W ma 1'497 mm 600 lm 250 ux - 95 cm W ma 1'004 mm 400 lm 250 ux - 95 cm W ma 513 mm 200 lm 250 ux - 95 cm W - 80 ma 268 mm 100 lm 250 ux - 95 cm and rail height 80 cm, stair case width 2 m, beam angle hand rail 0 : One-sided Two-sided Two-sided anee light bar type 5, IP67, 5'000 K, VC Item no. E W/mA ength umen ux W ma 2'997 mm 600 lm 135 ux - 95 cm W ma 1'497 mm 300 lm 135 ux - 95 cm W ma 1'004 mm 200 lm 135 ux - 95 cm W - 80 ma 513 mm 100 lm 135 ux - 95 cm and rail height 80 cm, stair case width 2 m, beam angle hand rail 0 : One-sided anee light bar type 7, IP67, 5'000 K, VC Item no. E W/mA ength umen ux W - 2'660 ma 2'997 mm 5'260 lm 370 ux - 95 cm W - 1'260 ma 1'497 mm 2'490 lm 370 ux - 95 cm W ma 1'004 mm 1'660 lm 370 ux - 95 cm W ma 513 mm 830 lm 370 ux - 95 cm W ma 184 mm 275 lm 370 ux - 95 cm and rail height 80 cm, stair case width 2 m, beam angle hand rail 0 : One-sided Two-sided Two-sided Phone Fax shop.gifas.ch info@gifas.ch 5

6 Technical data Item no System cable 2 x 2.5 m 2 Support E set, selection according requested luminous intensity Connection bracket Item no Current collector Item no screw 3 x 12 Casting compound 2c cast resin PUR transparent Item no olding clamp Support Cable cover with 0.5 m cable GIFAS hand rail INOX The hand rail profile from GIFAS made from stainless steel V2A is the carrier element for the R-aneE-INOX system. The profile and the various fastening and connecting items are designed and coordinated in a way that ensures the electric supply with the cable. Composition of the INOX hand rail The INOX profile contains a dovetail slot as a holding fixture for the light bar. This design was chosen specifically to protect against vandalism. Following successful sub-assembly, the light bar (complete mechanical installation) must be inserted lengthwise and secured in the slot. The connecting and fastening parts allow the cable routing to pass through Current collector Supply cable 2 x 2.5 mm andrail E Module Encapsulation 6 GIFAS-EECTRIC Gmb ietrichstrasse 2 P.O. Box C-9424 Rheineck

7 Product range anee INOX Profile pipes INOX Round pipe Ø 42.4 mm without slot for light bar Joint pieces INOX Angle freely adjustable for directional changes in the layout INOX profile pipe round V2A, brushed grain 240 = 2'500 mm, Ø 42.4 x 1.5 mm INOX-Profilrohr rund V2A, brushed grain 240 = 5'000 mm, Ø 42.4 x 1.5 mm Joint piece INOX 0-70 V2A, brushed grain 240 Opening inside Profile pipes INOX Round pipe Ø 42.4 mm with slot for light bar Joint piece INOX 0-70 V2A, brushed grain 240 Opening outside INOX profile pipe with slot V2A, brushed grain 240 = 1'000 mm, Ø 42.4 x 1.5 mm INOX profile pipe with slot V2A, brushed grain 240 = 2'000 mm, Ø 42.4 x 1.5 mm INOX profile pipe with slot V2A, brushed grain 240 = 3'000 mm, Ø 42.4 x 1.5 mm Cover profiles INOX For light-free sections Joint piece INOX 0-70 V2A, brushed grain 240 Opening on the side Cover profile INOX V2A, brushed grain 240 = 1'000 mm, Ø 42.4 x 1.5 mm Joint piece INOX 0-70 V2A, brushed grain 240 no opening, for profile pipe round Phone Fax shop.gifas.ch info@gifas.ch 7

8 Product range anee INOX Corner pieces INOX Fixed 90 angle for directional changes in the layout Mounting connecting part INOX, straight Connections for profile pipes with drillings for hand rail posts Corner piece INOX 90 V2A, brushed grain 240 Opening on the side Mounting connecting part INOX, brushed grain 240 = 80 mm, without thread Corner piece INOX 90 V2A, brushed grain 241 Opening inside Mounting connecting part INOX, brushed grain 240 = 80 mm, 2x drilling straight Corner piece INOX 90 V2A, brushed grain 243, no opening, for profile pipe round Mounting connecting part INOX, brushed grain 240 = 80 mm, 2x drilling 20 offset Corner piece INOX 90 V2A, brushed grain 242 Opening outside Mounting connecting part INOX, brushed grain 240 = 80 mm, 2x drilling 20 offset, on the side 8 GIFAS-EECTRIC Gmb ietrichstrasse 2 P.O. Box C-9424 Rheineck

9 Product range anee INOX Transitional connecting part INOX straight For longitudinal connections of the profile pipes and rail supports-wall fastening INOX For easy lateral and height positioning schwenkbar ± Transitional connecting part INOX, brushed grain 240 = 6 mm, for profile pipe round Ø 60 Ø INOX hand rail support E 90 with joint V2A, = 75 / = 50 mm, rosette 60 mm, brushed grain Transitional connecting part INOX, brushed grain 241 Without base End pieces/caps INOX As end piece for the hand rail End piece INOX E V2A End piece INOX E V2A Item no. Item no. escription Ø 60 Ø 60 Ø 50 M8 M INOX hand rail support E 90 V2A = 80 / = mm, rosette 50 mm, brushed grain 240 escription schwenkbar ± INOX hand rail support E 90 with joint V2A, = 80 / = mm, rosette 50 mm, brushed grain 240 x Ø End piece INOX V2A, for profile pipe round INOX hand rail support E 90 V2A, = / = mm, rosette 60 mm, brushed grain 240 Phone Fax shop.gifas.ch info@gifas.ch 9

10 schwenkbar ±45 ø 42 ø 50 M8 ø 50 M8 ø 60 ø 60 ø 42 schwenkbar ±45 ø 60 ø 50 M8 ø 60 ø 42 Best. ø 60 Product range anee INOX ø 60 ø INOX hand rail support E straight V2A, supply line = 70 mm, rosette 60 mm, brushed grain INOX hand rail support 90 with joint V2A, 2x drilling offset, = 75 / = 50 mm, rosette 60 mm, brushed grain INOX hand rail support E straight V2A = 70 mm, rosette 60 mm, brushed grain INOX hand rail support 90 V2A, 2x drilling straight = 75 / = 50 mm, rosette 50 mm, brushed grain INOX hand rail support E 90 V2A, supply line = 70 / = 45 mm, rosette 60 mm, brushed grain INOX hand rail support 90 gerade V2A, 2x drilling offset = 80 / = mm, rosette 50 mm, brushed grain 240 ø INOX hand rail support E 90 V2A = 70 / = 45 mm, rosette 60 mm, brushed grain INOX hand rail support 90 V2A, 2x drilling straight = 80 / = mm, rosette 50 mm, brushed grain 240 ø INOX hand rail support 90 V2A, 2x drilling straight = 75 / = 50 mm, rosette 60 mm, brushed grain GIFAS-EECTRIC Gmb ietrichstrasse 2 P.O. Box C-9424 Rheineck

11 Product range anee INOX and rail supports-attachment mounting INOX As attachment on rail posts schwenkbar ±45 20 M M10 schwenkbar ±45 20 M1 0 schwenkbar ± INOX hand rail support E attachment with joint V2A, supply line, = 79 mm, brushed grain INOX hand rail support E attachment V2A = 79 mm, brushed grain INOX hand rail support attachment V2A, 2x drilling straight = 71 mm, brushed grain INOX hand rail support attachment M10 V2A, 2x drilling offset, = 71 mm, brushed grain INOX hand rail support attachment V2A, 2x drilling straight = 79 mm, brushed grain INOX hand rail support attachment 90 V2A = 79 mm, brushed grain INOX hand rail support attachment M10 90 V2A = 71 mm, brushed grain INOX hand rail support attachment with joint V2A, 2 x drilling offset, = 79 mm, brushed grain INOX hand rail support E attachment with joint V2A = 79 mm, brushed grain 240 Phone Fax shop.gifas.ch info@gifas.ch 11

12 Best d Product range anee INOX and rail post INOX incl. accessories Various accessories For easy assembly Ø 9 ø 80 ø INOX hand rail post V2A with base Ø 105 mm, = 989 mm, brushed grain Truss head screw V2A with hexagon socket M5 x 10 mm (Sales unit 100 pieces) Truss head screw V2A with hexagon socket M5 x 16 mm (Sales unit 100 pieces) INOX rosette V2A, Ø 110 mm brushed grain Raised countersunk head screw V2A with four-way socket wrench M5 x 10 mm (Sales unit 100 pieces) Raised countersunk head screw V2A with four-way socket wrench M5 x 16 mm (Sales unit 100 pieces) ø 5 ø 5 62 ø 30 ø 42 d INOX bottom flange with joint V2A brushed grain INOX spacer screw V2A for supports, Ø 60 x 1 mm INOX spacer screw V2A for supports, Ø 60 x 2 mm INOX spacer screw V2A for supports, Ø 60 x 5 mm INOX spacer screw V2A for supports, Ø 60 x 10 mm INOX support pipe V2A, brushed grain 240 = 986 mm, Ø 42.4 x 2.00 mm 12 GIFAS-EECTRIC Gmb ietrichstrasse 2 P.O. Box C-9424 Rheineck

13 System components power supply System components power supply The electric power supply of the anee light bar is ensured through power supplies that are individually installed into the main or sub-distribution or that are directly built into the housing on site. (housing hard rubber or in polycarbonate housing) The supply voltage is 24 VC and it is generated with a power pack 230 VAC different output sizes are available! (In each case depending on the total lighting length and the performance of the desired E light output). Item no Power supply with 2x power pack 240 W 230 VAC / 24 VC Power supply distributor anee (example) 110 mm deep Specifications: Combination of switching devices for power supply anee Colour grey RA7035, halogen-free polycarbonate housing, 300 x 230 x 110 mm (W x x ) IP66 Equipment: Power pack 230 VAC / 24 VC (output and quantity object-specific) 2 cable connections M20 x 1.5 (cable 2 x Ø 5 mm) 1 cable connection M25 x 1.5 (cable 2 x Ø mm) The anee light bars can be dimmed and their brightness can be adjusted continuously with a regular rotary dimmer. E supply 24 VC cable 2 x 2.5 mm 2 IS CONNECTE ON SITE! Item no Power supply with 1x power pack 320 W 230 VAC / 24 VC Item no Power supply with 1x power pack 240 W 230 VAC / 24 VC 165 mm deep 110 mm deep E supply 24 VC cable 2 x 2.5 mm 2 IS CONNECTE ON SITE! Item no E supply 24 VC cable 2 x 2.5 mm 2 IS CONNECTE ON SITE! Power supply with 2x power pack 320 W 230 VAC / 24 VC Power packs 230 VAC / 24 VC W, IP67, dimmable Power packs 230 VAC / 24 VC W, IP65, dimmable UP rotary dimmer 1-10 VC white Power supply distributor anee complete with 1 power pack 230 VAC / 24 VC 240 W IP Power supply distributor anee complete with 2 power pack 230 VAC / 24 VC 240 W IP Power supply distributor anee complete with 1 power pack 230 VAC / 24 VC 320 W IP Power supply distributor anee complete with 2 power pack 230 VAC / 24 VC 320 W IP66 E supply 24 VC cable 2 x 2.5 mm 2 IS CONNECTE ON SITE! 165 mm deep Phone Fax shop.gifas.ch info@gifas.ch 13

14 Applications Passage way lighting Staircase lighting entrance area Passage way lighting Staircase lighting entrance area Staircase lighting entrance area 14 GIFAS-EECTRIC Gmb ietrichstrasse 2 P.O. Box C-9424 Rheineck

15 Applications Staircase lighting graveyard Staircase lighting graveyard anee INOX with hand rail support 90 Staircase lighting graveyard anee INOX with hand rail support 90 Phone Fax shop.gifas.ch 15

16 GET IN TOUC WIT US We reserve the right to make technical modifications. V0215 News about the assortment and specific solutions you can find on our website: GIFAS-EECTRIC Gmb ietrich Strasse 2 P.O. Box 275 C-9424 Rheineck Phone Fax shop.gifas.ch info@gifas.ch