1394 cables for moving applications

Transcription

1 9 drag chain cable 9 cables for moving applications ALLIED VISION TECHNOLOGIES GMBH Taschenweg a D-0766 Stadtroda Germany Phone: +9 68/677-0 Fax: +9 68/ info@alliedvisiontec.com

2 9 drag chain cable 9 drag chain cables for moving applications AVT s mechanically robust, drag chain and robot 9 cables are ideal for moving applications. The high quality cables guarantee low damping and best signal quality for all speeds. Specifications Feature 9a, robust 9a, drag chain 9a/b, robotics Cycles,000,000 6,000,000 0,000,000 (not directly comparable due to different test conditions) ( return sheaves, r = 0 mm) (drag radius 7 mm stroke 600 mm accel. 0 m/s speed m/s) (Rolling radius 0 mm stroke 00 mm accel. g = 9.6 m/s) Jacket Pb free PVC; 7. mm Ø TPE based; 7. mm Ø PU; 7. mm Ø Outer shield Tinned annealed Cu wire, >8 % coverage Tinned annealed Cu wire, ca. 90 % coverage Silver plated Cu Conductor A (data) Tinned copper, 0 x 0.08 (AWG6); 0.0 mm Tinned copper, AWG 6 Silver plated copper, AWG 8 Conductor B (power) Tinned copper, 0 x 0.08 (AWG0); 0.8 mm Bare copper, AWG Bare copper, AWG Max. DC resistance 8. Ω/km at 0 C (Conductor B) 6 Ω/km (conductor A) 6 Ω/km (conductor B) 0 Ω/km (conductor A) 6 Ω/km (conductor B) Char. Impedance 0 Ω ± 6% n/a 0 Ω ± % Attenuation MHz MHz MHz MHz n/a MHz MHz MHz MHz. 000 MHz Time delay Max..0 ns/m n/a. ns/m Skew delay Max. 00 ps/m between pairs n/a < ps/m Compliance UL 076 (80 ºC, 0 V), ROHS ROHS, CE, UL, DESINA ROHS, CE, UL

3 9 drag chain cable Pinout IEEE 9a P PINOUT P Connectors are viewed as looking at the front plug face. *Twisted pair shields are only connected by using cable material according to IEEE Std 9TM -99. If cable material according to IEEE Std 9b -00 is used, twisted pair shields are not connected inside the cable. Plug Signal name at plug Plug V P (Power Voltage) V G (Power Ground) TPB* (Twisted Pair B minus) TPB (Twisted Pair B plus) 6 TPA* (Twisted Pair A minus) 6 TPA (Twisted Pair A plus) Plug shield Cable outer shield Plug shield

4 9 drag chain cable IEEE 9b P PINOUT P Connectors are viewed as looking at the front plug face. Plug plug Plug TPB* (Twisted Pair B minus) TPB (Twisted Pair B plus) TPA* (Twisted Pair A minus) TPA (Twisted Pair A plus) TPA (R) (Twisted Pair A ground reference) 9 6 VG (Power ground) 6 7 No connection 7 8 VP (Power Voltage) 8 9 TPB (R) (Twisted Pair B ground reference) Plug shield Cable outer shield Plug shield

5 9 drag chain cable Order codes Description Length Order number Cable 9a, latch - latch, robust Cable 9a, latch - latch, drag chain.0 m.0 m.0 m. m. m 6.0 m 0.0 m K0087 K0089 K0090 K0066 K0000 K70009 K70008 Cable 9b, screw lock - screw lock, robot.0 m K000 Other cable lengths are available on request. Description Cable diameter Order number Ferrite for AVT cables..0 mm. 6.0 mm mm K800 K8007 K8006 Ferrite removing tool For all sizes K8008 Disclaimer Technical specifications are subject to change without notice. All trademarks are acknowledged as property of their respective owners. Copyright 0 Allied Vision Technologies. Document owner: OGU ALLIED VISION TECHNOLOGIES GMBH Taschenweg a D-0766 Stadtroda / Germany All rights reserved. Managing Director: Mr. Frank Grube Tax ID: DE 88

6 AVT 9 accessories 9a cable clip 9a cable clip Your solution to improve 9a wiring AVT s 9a cable clip locks AVT s 9a standard cable to your AVT Guppy cameras and 9a accessories. This clip may be added to existing 9a cabling to secure the plug connection against accidental extraction. Highlights Improving 9a wiring Compatible with AVT's Guppy camera May be added to existing cabling ALLIED VISION TECHNOLOGIES GMBH Taschenweg a D-0766 Stadtroda Germany Phone: +9 68/677-0 Fax: +9 68/ info@alliedvisiontec.com 0/008 Design and specification of the described product(s) are subject to change without notice.

7 AVT 9 accessories 9a cable Application examples Clip used on camera side Clip used on card side Compliance list Order numbers Camera Guppy-series Active Accessories K0000 K0000 K K K K00006 K K00000 K0000 K Cable K0007 K006 K0006 K00078 K000 K008 K007 K006 Description Compliant to all cameras of the Guppy series FWX-PCIE0- (Dual OHCI FireWire (x IEEE 9a) to PCI Express Host Adapters) FWX-PCIE0- (Dual OHCI FireWire (x IEEE 9a) to PCI Express Host Adapters) FW-PCIE0 (-port IEEE 9 to PCI Express Host Adapter) IOI-60- (-port Dual Channel OHCI Compliant IEEE 9 to PCI Host Adapter) IOI-60- (-port Dual Channel OHCI Compliant IEEE 9 to PCI Host Adapter) FW-PCI0 (-port OHCI Compliant 9a to PCI Host Adapter) IOI-9R-A (-port 9a Repeater, clamp locking) IOI-9RB (IEEE-9a -port Repeater) FWUTP-0B (Converter x9a to x Cat) FW-UTPS00 (Converter x9a to x Cat) IEEE 9a; cable 6 pin 6 pin, 0. m IEEE 9a; cable 6 pin 6 pin,.0 m IEEE 9a; cable 6 pin 6 pin,.0 m IEEE 9a; cable 6 pin 6 pin,.0 m IEEE 9a; cable 6 pin 6 pin,. m IEEE 9a; cable 6 pin 6 pin, 6.0 m IEEE 9a; cable 6 pin 6 pin, 8.0 m IEEE 9a; cable 6 pin 6 pin, 0.0 m and other length based on this cable Ordering numbers: 9a cable clips 0 pcs 9a cable clips 0 pcs K00007 K00007 ALLIED VISION TECHNOLOGIES GMBH Taschenweg a D-0766 Stadtroda Germany Phone: +9 68/677-0 Fax: +9 68/677- v.0 info@alliedvisiontec.com 0/008 Design and specification of the described product(s) are subject to change without notice.

8 AVT 9 accessories 9 i.link TM adapter i.link TM adapter for laptop application Your cable for laptop applications with AVT IEEE 9 cameras. ALYSIUMs i.link TM cable is ideal for connection of IEEE 9 cameras to any laptop with -pin i.link TM connector. The high quality cables guarantee low damping and best signal quality for all speeds. Due to the power connector you can provide bus power and do not have to power each single camera. Highlights Compliant with IEEE 9a RoHS compliant Compatible with AVT s IEEE 9 cameras ALLIED VISION TECHNOLOGIES GMBH Taschenweg a D-0766 Stadtroda Germany Phone: +9 68/677-0 Fax: +9 68/ info@alliedvisiontec.com

9 AVT 9 accessories 9 i.link TM adapter Technical Specifications Feature Description 9 cable Description power cable Jacket Pb free PVC; 0.8 mm thick,.8 mm Ø Pb free PVC; 0. mm thick,.0 mm Ø Outer shield - Braid - aluminium wire, min. 90 % coverage Spiral Tinned copper, min. 9 % coverage - Al-foil/mylar, % overlap Cable assembly pairs of (A) plus x Filler (no Coaxial cable power conductor) Inner shield - Spiral - tinned copper, min. 9 % coverage - Al-foil/mylar, % overlap Insulation A FOAM-SKIN-PE; 0.7 mm thick; FOAM-PE;.07 mm thick;.7 mm Ø Conductor A (Data) Conductor B (Power) 0.8 mm Ø Tinned copper, 7x 0.0 (AWG8); 0. mm Tinned copper, 7x 0.0 (AWG); 0. mm Max. DC resistance 76 Ω/km at 0 C 9. Ω/km at 0 C Char. impedance 0 Ω ± 6 Ω Attenuation 00 MHz: ±.9 db/m Time delay Max..0 ns/m Skew delay Max. 00 ps/m between pairs Compliance UL 076 (80ºC, 0 V) UL (80ºC, 0 V) Ordering number: i.link TM adapter -pin 6-pin + DC IEEE9 Adapter -pin connector to 6-pin female with DC-in K00070 Power supply V DC,. A Wall power supply W, circular plug-in connector./. mm E000 Ferrite for AVT cables for cable diameter mm K800 Tool for ferrites for all sizes, to remove ferrites from cable K8008 Note: Please be aware of polarity of the used power supply ( ). Wrong polarity can damage camera or laptop. ALLIED VISION TECHNOLOGIES GMBH Taschenweg a D-0766 Stadtroda Germany Phone: +9 68/677-0 Fax: +9 68/677- Author: GBR info@alliedvisiontec.com 0/007 Design and specification of the described product(s) are subject to change without notice.

10 AVT 9 accessories 9 cable 9b high grade cable Your high grade / long distance cables for AVT IEEE 9b cameras. ALYSIUMs high grade cables are ideal for connection of IEEE 9b cameras in any industrial application. The high quality cables guarantee low damping and best signal quality for all speeds. Both sides are equipped with screw lock connectors. The maximum length ist extended up to meters due the excellent electrical characteristics of the cable. Highlights Compliant with IEEE 9b UL certified and RoHS compliant Compatible with all AVT s IEEE 9b cameras Extended Lenghts up to meters ALLIED VISION TECHNOLOGIES GMBH Taschenweg a D-0766 Stadtroda Germany Phone: +9 68/677-0 Fax: +9 68/ info@alliedvisiontec.com

11 AVT 9 accessories 9 cable Technical Specifications Feature Description Jacket Pb free PVC; 0.8mm thick,,9 mm Ø; UL 076 cert. (@ 80 ºC, 0 V) Outer braid shield Tinned annealed Cu, min. 8 % coverage, composition 0,mm Binder tape Paper Cable assembly S, x (A) plus x (B) Inner shield AL-PET (min 00%) Insulation A XLFMPE; 0.66 mm thick;,0 mm Ø Conductor A (Data) Tinned annealed Cu; 7 x 0.6 (AWG); 0.78 mm Ø Conductor B (Power) Tinned annealed Cu; 6 x 0.6 (AWG0); 0.9 mm Ø Insulation B HR-LF-PVC; 0. mm thick;,76 mm Ø Max. DC resistance A:6,9 B:9, [Ohm/km at 0 C ] Char. Impedance 0 Ohm nominal Static bending radius min. 6 x outer diameter [~7 mm) Pinout IEEE 9b P 8 9 PINOUT 6 Connectors are viewed as looking at the front plug face. P Plug Signal name at plug end Plug TPB* (Twisted Pair B minus) TPB (Twisted Pair B plus) TPA* (Twisted Pair A minus) TPA (Twisted Pair A plus) TPA (R) (Twisted Pair A ground reference) 9 6 VG (Power Ground) 6 7 No connection 7 8 VP (Power Voltage) 8 9 TPB (R) (Twisted Pair B ground reference) Plug shield Cable outer shield Plug shield Ordering number: 9-Pin -- 9-Pin industrial,0m IEEE 9b; x screw lock, high grade long distance, for Pike/ Stingray K009 Shorter lengths on request! ALLIED VISION TECHNOLOGIES GMBH Taschenweg a D-0766 Stadtroda Germany Phone: +9 68/677-0 Fax: +9 68/ info@alliedvisiontec.com 0/009 Design and specification of the described product(s) are subject to change without notice.

12 AVT 9 accessories 9a cable 9 9a standard cable Your standard cable for AVT IEEE 9a cameras. Alysium s standard cable is ideal for connection of AVT s IEEE 9a cameras to any IEEE 9a port in a PC. Due to its great price-performance ratio it is suitable for all standard applications. It comes with each AVT Guppy, Marlin and Oscar camera for easy plug and play. Highlights Compliant with IEEE 9a UL 076 certified and RoHS compliant Pb free PVC jacket Compatible with AVT s IEEE 9a cameras ALLIED VISION TECHNOLOGIES GMBH Taschenweg a D-0766 Stadtroda Germany Phone: +9 68/677-0 Fax: +9 68/ info@alliedvisiontec.com

13 AVT 9 accessories 9a cable Technical Specifications Lenght Feature Description Jacket Pb free PVC; 0.8 mm thick,. mm Ø Outer braid shield Aluminium wire, min. 90 % coverage Outer shield Al-foil / mylar, % overlap Cable assembly pairs of (A) plus x (B) Inner braid shield Tinned copper, min. 7 % coverage Inner shield Al-foil / mylar, % overlap Insulation A FOAM-SKIN-PE; 0.7 mm thick; 0.8 mm Ø Conductor A (Data) Tinned copper, 7 x 0.0 (AWG8); 0. mm Conductor B (Power) Tinned copper, 7 x 0.0 (AWG); 0. mm Insulation B SR-PVC; 0. mm thick;.07 mm Ø Max. DC resistance 9. Ω/km at 0 C Char. impedance 0 Ω ± 6 Ω Attenuation 00 MHz: ±.9 db/m Time delay Max..0 ns/m Skew delay Max. 00 ps/m between pairs Compliance UL 076 (80ºC, 0 V) Ordering number: Cable 0. m 6-pin to 6-pin IEEE9a, standard K0007 Cable.0 m 6-pin to 6-pin IEEE9a, standard K006 Cable.0 m 6-pin to 6-pin IEEE9a, standard K0006 Cable.0 m 6-pin to 6-pin IEEE9a, standard K00078 Cable. m 6-pin to 6-pin IEEE9a, standard K000 Cable 6.0 m 6-pin to 6-pin IEEE9a, standard K008 Cable 8.0 m 6-pin to 6-pin IEEE9a, standard K007 Cable 0.0 m 6-pin to 6-pin IEEE9a, standard K006 ALLIED VISION TECHNOLOGIES GMBH Taschenweg a D-0766 Stadtroda Germany Phone: +9 68/677-0 Fax: +9 68/677- Author: NBR info@alliedvisiontec.com 0/008 Design and specification of the described product(s) are subject to change without notice.

14 9 locking cables 9 locking cables Your locking cables for AVT IEEE 9 cameras AVT locking cables are ideal for connection of IEEE 9 cameras in any industrial application. The high quality cables guarantee low damping and best signal quality for all speeds. Due to the combinations all kinds of AVT cameras can be combined with all kinds of IEEE 9 interfaces under different conditions. Highlights Compliant with IEEE 9a and IEEE 9b RoHS compliant Compatible with all AVT's IEEE 9 cameras ALLIED VISION TECHNOLOGIES GMBH Taschenweg a D-0766 Stadtroda Germany Phone: +9 68/677-0 Fax: +9 68/ info@alliedvisiontec.com

15 9 locking cables AVT I/O cables are manufactured in accordance with the CE standard and its underlying directions. AVT I/O cables comply with the requirements of the EU directive 00/9/EC (Restriction of the use of certain hazardous substances in Electrical and Electronic Equipment - RoHS). We declare, under our sole responsibility, that the described 9 locking cables conform to the directives of UL076.

16 9 locking cables Technical specifications Feature Description Jacket Pb free PVC; 0.6 mm thick, 7. mm Ø; UL 076 cert. 80 ºC, 0 V) Outer braid shield Tinned annealed Cu, min. 8 % coverage Outer shield AL-PET tape Cable assembly x (A) plus x (B) Inner shield AL-PET Drain wire A Tinned annealed Cu; 7x 0.0 (AWG); 0.6 mm Ø Insulation A FM-PE; 0. mm thick;.6 mm Ø Conductor A (Data) Tinned annealed Cu; 7x 0.0 (AWG); 0.6 mm Ø Conductor B (Power) Tinned annealed Cu; 7x 0.0 (AWG); 0.6 mm Ø Insulation B HR-LF-PVC; 0. mm thick; 0.9 mm Ø Max. DC resistance 88 Ohm/km at 0 C Char. impedance 0 Ohm +/-6 Attenuation 00 MHz: <= 0. db/m Time delay Max..0 ns/m Skew delay Max. 0 ps/m between pairs Table : 9 locking cables specifications

17 9 locking cables Pinout IEEE 9 legacy (9-pin to 6-pin) Figure : Pinout: IEEE 9 legacy (9-pin to 6-pin) Note Twisted pair shields are only connected by using cable material according to IEEE Std 9TM -99. If cable material according to IEEE Std 9bTM -00 is used, twisted pair shields are not connected inside the cable. Connectors are viewed as looking at the front plug face. Plug Signal name at plug end Plug TPB* (Twisted Pair B minus) 6 TPB (Twisted Pair B plus) TPA* (Twisted Pair A minus) TPA (Twisted Pair A plus) TPA (R) (Twisted Pair A ground reference) VG (Power Ground) 6 No connection 7 VP (Power Voltage) 8 TPB (R) (Twisted Pair B ground reference) 9 Plug shield Cable outer shield Plug shield Table : Connectors layout

18 9 locking cables IEEE 9a Figure : Pinout: IEEE 9a Connectors are viewed as looking at the front plug face. Plug Signal name at plug end Plug VP (Power Voltage) VG (Power Ground) TPB* (Twisted Pair B minus) TPB (Twisted Pair B plus) 6 TPA* (Twisted Pair A minus) 6 TPA (Twisted Pair A plus) Plug shield Cable outer shield Plug shield

19 9 locking cables IEEE 9b Figure : Pinout: IEEE 9b Connectors are viewed as looking at the front plug face. Plug Signal name at plug end Plug TPB* (Twisted Pair B minus) TPB (Twisted Pair B plus) TPA* (Twisted Pair A minus) TPA (Twisted Pair A plus) TPA (R) (Twisted Pair A ground reference) 9 6 VG (Power Ground) 6 7 No connection 7 8 VP (Power Voltage) 8 9 TPB (R) (Twisted Pair B ground reference) Plug shield Cable outer shield Plug shield 6

20 9 locking cables Order codes 9a cables Description Order code FireWire cable -x Interlock IEEE 9a; x Interlock,. m with Ferrites, for Marlin/Oscar/Guppy K0006 FireWire cable -x Interlock IEEE 9a; x Interlock, 0 m with Ferrites, for Marlin/Oscar/Guppy K006 FireWire cable -x Interlock IEEE 9a; x Interlock,. m with Ferrites, for Marlin/Oscar/Guppy K006 FireWire cable -x Interlock IEEE 9a; x Interlock, 7. m with Ferrites, for Marlin/Oscar/Guppy K006 FireWire cable -x Interlock IEEE 9a; (x Interlock).0 m, for Marlin/Oscar/Guppy K0067 FireWire cable -x Interlock IEEE 9a; (x Interlock). m, for Marlin/Oscar/Guppy K0009 FireWire cable -x Interlock IEEE 9a; (x Interlock) 6.0 m, for Marlin/Oscar/Guppy K0060 FireWire cable -x Interlock IEEE 9a; (x Interlock) 7. m, for Marlin/Oscar/Guppy K00 FireWire cable -x Interlock IEEE 9a; (x Interlock) 0 m, for Marlin/Oscar/Guppy K009 9 legacy cables Description Order code Cable 0. m 9-pin to 6-pin industrial IEEE 9b/a; 9 pin (screw lock)/6 pin (latch), 0. m K0098 Cable.0 m 9-pin to 6-pin industrial IEEE 9b/a; 9 pin (screw lock)/6 pin (latch),.0 m K00 Cable. m 9-pin to 6-pin industrial IEEE 9b/a; 9 pin (screw lock)/6 pin (latch),. m K007 Cable 7. m 9-pin to 6-pin industrial IEEE 9b/a; 9 pin (screw lock)/6 pin (latch), 7. m K000 Cable 0 m 9-pin to 6-pin industrial IEEE 9b/a; 9 pin (screw lock)/6 pin (latch), 0 m K0009 9b cables straight without ferrite Description Order code Cable 0. m 9-pin to 9-pin, industrial IEEE 9b; x screw lock, 0.m, black, without ferrite K0006 Cable.0 m 9-pin to 9-pin, industrial IEEE 9b; x screw lock,.0m, black, without ferrite K00 Cable.0 m 9-pin to 9-pin, industrial IEEE 9b; x screw lock,.0m, black, without ferrite K000 Cable.0 m 9-pin to 9-pin, industrial IEEE 9b; x screw lock,.0m, black, without ferrite K0007 Cable.0 m 9-pin to 9-pin, industrial IEEE 9b; x screw lock,.0m, black, without ferrite K0069 Cable 7. m 9-pin to 9-pin, industrial IEEE 9b; x screw lock, 7.m, black, long distance, without ferrite K0008 Cable 0.0 m 9-pin to 9-pin, industrial IEEE 9b; x screw lock, 0 m, black, long distance, without ferrite K00 7

21 9 locking cables 9b cables angled Description Order code Cable.0 m 9-pin to 9-pin angled Cable.0 m 9-pin to 9-pin angled Cable 7. m 9-pin to 9-pin angled Cable.0 m 9-pin to 9-pin angled Cable.0 m 9-pin to 9-pin angled Cable 7. m 9-pin to 9-pin angled IEEE9b; angled on one side, x screw lock,.0 m Pike, Stingray, Guppy PRO IEEE9b; angled on one side, x screw lock,.0 m Pike, Stingray, Guppy PRO IEEE9b; angled on one side, x screw lock, 7. m Pike, Stingray, Guppy PRO IEEE9b; angled on one side, x screw lock,.0 m Pike, Stingray, Guppy PRO IEEE9b; angled on one side, x screw lock,.0 m Pike, Stingray, Guppy PRO IEEE9b; angled on one side, x screw lock, 7. m Pike, Stingray, Guppy PRO K0097 K0098 K009 K0096 K0099 K0000 Angled cables (cable exit direction at view on camera back): = angle left, = angle up, = angle right, = angle down Figure : IEEE 9b angled connector (left and right version have the same dimensions) Ferrites Description Order code Ferrite for AVT cables for cable diameter. -.0 mm K800 Ferrite for AVT cables for cable diameter mm K8007 Ferrite for AVT cables for cable diameter mm K8006 Tool for ferrites for all sizes, to remove ferrites from cable K8008 Other lengths on request. Additional references To download AVT Technical Manuals etc.: AVT product page: AVT knowledge base: AVT case studies: 8

22 9 locking cables Copyright All text, pictures and graphics are protected by copyright and other laws covering intellectual property. It is prohibited to copy or modify them for trade use or transfer, or inclusion on web sites. Allied Vision Technologies GmbH Headquarters: ALLIED VISION TECHNOLOGIES GMBH Taschenweg a D-0766 Stadtroda / Germany All rights reserved. Managing Director: Mr. Frank Grube Tax ID: DE 88 Design and specification of the described product(s) are subject to change without notice. Document owner: TFR 07/ 9

23 9 legacy cables 9 legacy cables ALLIED VISION TECHNOLOGIES GMBH Taschenweg a D-0766 Stadtroda Germany Phone: +9 68/677-0 Fax: +9 68/ info@alliedvisiontec.com

24 9 legacy cables Legacy cables for IEEE 9 cameras AVT s legacy cables are ideal for connection of IEEE 9 cameras to any IEEE 9a or IEEE 9b port of a PC or laptop. The high quality cables guarantee low damping and best signal quality for all speeds. Specifications All cables comply with IEEE 9 standard (IEEE Std 9-99) Feature Description Char. Impedance 0 Ohm +/-6 Attenuation (00 MHz) Time delay Skew delay.8 db/m Max..0 ns/m Max. 00 ps

25 9 legacy cables Pinout IEEE 9a legacy (9-pin to 6-pin) 6 P 6 PINOUT * P *Twisted pair shields are only connected by using cable material according to IEEE Std 9TM -99. If cable material according to IEEE Std 9b -00 is used, twisted pair shields are not connected inside the cable. Connectors are viewed as looking at the front plug face. Plug Signal name at plug end Plug TPB* (Twisted Pair B minus) 6 TPB (Twisted Pair B plus) TPA* (Twisted Pair A minus) TPA (Twisted Pair A plus) TPA (R) (Twisted Pair A ground reference) VG (Power Ground) 6 No connection 7 VP (Power Voltage) 8 TPB (R) (Twisted Pair B ground reference) 9 Plug shield Cable outer shield Plug shield

26 9 legacy cables IEEE 9 (6-pin to -pin) P PINOUT P 6 6 Connectors are viewed as looking at the front plug face. Plug Signal name at plug end Plug VP (Power Voltage) Plug shield VG (Power Ground) TPB* (Twisted Pair B minus) TPB (Twisted Pair B plus) TPA* (Twisted Pair A minus) TPA (Twisted Pair A plus) 6 Cable outer shield Plug shield

27 9 legacy cables IEEE 9 legacy (9-pin to -pin) P PINOUT P Connectors are viewed as looking at the front plug face. Plug Signal at plug Plug TPB* (Twisted Pair B minus) TPB (Twisted Pair B plus) TPA* (Twisted Pair A minus) TPA (Twisted Pair A plus) Plug shield TPA (R) (Twisted Pair A ground reference) VG (Power Ground) 6 No connection 7 VP (Power Voltage) 8 Plug shield TPB (R) (Twisted Pair B ground reference) Cable outer shield 9 Plug shield

28 9 legacy cables Order codes Description Length Order number Legacy cable 9b (9 pin) to 9a ( pin) standard connectors. m K006 Legacy cable 9a (6 pin) to 9a ( pin) standard connectors Legacy cable 9a (6 pin latch) to 9b (9 pin screw lock) connectors.0 m. m 0. m.0 m. m 7. m 0 m K0006 K000 K0098 K00 K007 K000 K0009 Other cable lengths are available on request. Description Cable diameter Order number Ferrite for AVT cables..0 mm. 6.0 mm mm K800 K8007 K8006 Ferrite removing tool For all sizes K8008 Disclaimer Technical specifications are subject to change without notice. All trademarks are acknowledged as property of their respective owners. Copyright 0 Allied Vision Technologies. Document owner: OGU ALLIED VISION TECHNOLOGIES GMBH Taschenweg a D-0766 Stadtroda / Germany All rights reserved. Managing Director: Mr. Frank Grube Tax ID: DE 88 6

29 Instruction Leaflet AVT I/O cables V.0. June 0 AVT I/O cables are manufactured in accordance with the CE standard and its underlying directions. AVT I/O cables comply with the requirements of the EU directive directive 00/9/EC (Restriction of the use of certain hazardous substances in Electrical and Electronic Equipment - RoHS). We declare, under our sole responsibility, that the described AVT I/O Cables conform to the directives of UL076. Contacting AVT Ordering and general information: info@alliedvisiontec.com phone (for Germany): +9 (0) phone (for North America): phone (for Singapore): Support: support@alliedvisiontec.com Outside Germany/North America: Please check the link for your local dealer. Specifications Feature 8-pin cable -pin cable -pin cable Manta / Stingray board level Jacket HR-PVC (Pb free), PVC Class, PVC 0 C, 0.8 mm thick, 6. mm Ø +/ mm Ø.0 mm Ø Outer braid shield Cable assembly Insulation Conductor Tinned annealed Tinned annealed Tinned annealed copper, min. 8 % copper, min. 8 % copper coverage coverage pairs ( used) x single x single HRLF PVC 0. mm SR-PVC PVC 80 C thick, 0.8 mm Ø Tinned annealed copper 7 x 0.7 (AWG 8); 0.8 mm Ø Max. 6 /km at conductor DC 0 C resistance Min. 0 M x km at insulation DC 0 C resistance Compliance UL 076 (80ºC / 0 V), RoHS (00/9/EC) Tinned annealed copper, 7 x 0.6 mm (AWG6) max. 0 /km at +0 C min. 00 M x km at +0 C UL/cUL, Style 6/06, RoHS Tinned annealed copper, 7 x 0.6 (AWG6); 0.8mm Ø max. /km at +0 C min. M x km at +0 C UL 6/06, VDE88, UL06 Trigger cable configuration AVT part number Legacy AVT part number Description 8 K009 -pin HIROSE female to open end,.0 m 8 K009 -pin HIROSE female to open end,.0 m 0-60A 0-60A 87 K009 -pin HIROSE female to open end,.0 m 88 K009 -pin HIROSE female to open end, 0.0 m A -pin HIROSE male to open end,.0 m pin HIROSE male to open end,.0 m pin HIROSE male to open end, 0.0 m K pin PicoBlade to open end,.0m K pin PicoBlade to open end,.0m K pin HIROSE female to open end,.0 m K pin HIROSE female to open end,.0 m K009-8-pin HIROSE female to open end, 0.0 m A -pin Mini-D shell to open end,.0 m pin Mini-D shell to open end,.0 m pin Mini-D shell to open end, 0.0 m Trigger cable (only connected to Trigger IN ) K pin HIROSE female to BNC,.0 m K00 - -pin HIROSE female to BNC,.0 m K pin HIROSE female to open end,.0 m K00 - -pin HIROSE female to open end, 0.0 m I/O connector pin assignment AVT standard HIROSE -pin connector Drawing Pin Color Blue HR0A-0P-S Red Pink Grey 9 Yellow Green 7 7 Brown 6 8 White 9 Black 0 Orange White/Black White/Brown Supported AVT cameras: 9a: Marlin, Oscar 9b: Stingray, Guppy PRO, Pike GigE: Manta, Manta PoE, Prosilica GT / GX / GC

30 AVT Guppy HIROSE 8-pin connector Drawing Pin Color HRA-7TP-8S Yellow dot Red Yellow dot Black Grey dot Red 7 Grey dot Black Pink dot Black Pink dot Red 7 Orange dot Black 8 Orange dot Red Supported AVT cameras: 9a: Guppy Prosilica GE HIROSE -pin female connector Drawing Pin Color HR0A-0P-P Supported AVT cameras: GigE: Prosilica GE Blue Red Pink Grey Yellow 6 Green 7 Brown 8 White 9 Black 0 Orange White/Black White/Brown AVT Manta / Stingray board level camera Picoblade connector Drawing Pin Color Supported AVT cameras: Manta/Stingray board level Blue Red White/Black Grey Yellow 6 Green 7 Brown 8 White 9 Black 0 Orange White/Brown Violet Shield-Transparent Prosilica GB/GS camera connector Drawing Pin Color Red Note 7 -pin Mini-D 8 Supported AVT cameras: Prosilica GB/GS series Black White Brown Green 6 Blue 7 Orange Yellow White/Brown Pink White/Black Grey For technical details of input ranges Uin, see the AVT Technical Manuals and the AVT I/O cable data sheet. Additional references To download AVT Technical Manuals etc.: downloads/product-literature.html AVT product page: cameras.html AVT knowledge base: knowledge-base.html AVT case studies: applications.html Copyright All text, pictures and graphics are protected by copyright and other laws covering intellectual property. It is prohibited to copy or modify them for trade use or transfer, or inclusion on web sites. Allied Vision Technologies GmbH 06/0 Headquarters: Allied Vision Technologies GmbH Taschenweg a D-0766 Stadtroda / Germany All rights reserved. Managing Director: Mr. Frank Grube Tax ID: DE 88