Mobile Client Capability Brief for Blizzard* World of Warcraft* Patch Update and Microsoft* Windows* Defender*

Transcription

1 Mobile Client Capability Brief for Blizzard* World of Warcraft* Patch Update and Microsoft* Windows* Defender* Version Rev 0.1

2 Performance tests and ratings are measured using specific computer systems and/or components and reflect the approximate performance of Intel products as measured by those tests. Any difference in system hardware or software design or configuration may affect actual performance. Buyers should consult other sources of information to evaluate the performance of systems or components they are considering purchasing. For more information on performance tests and on the performance of Intel products, visit Intel Performance Benchmark Limitations ( Information in this document is provided in connection with Intel products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Intel s Terms and Conditions of Sale for such products, Intel assumes no liability whatsoever, and Intel disclaims any express or implied warranty, relating to sale and/or use of Intel products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright or other intellectual property right. Intel products are not intended for use in medical, life saving, or life sustaining applications. Intel may make changes to specifications and product descriptions at any time, without notice. Designers must not rely on the absence or characteristics of any features or instructions marked reserved or undefined. Intel reserves these for future definition and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future changes to them. Intel Solid State Drives may contain design defects or errors known as errata. Current characterized errata are available on request. Contact your local Intel sales office or your distributor to obtain the latest specifications and before placing your product order. Copies of documents which have an ordering number and are referenced in this document, or other Intel literature, may be obtained by calling or by visiting Intel s Website at Copyright 2008 Intel Corporation. * Other names and brands may be claimed as the property of others.

3 About this Document This document is a guide measuring performance of the Intel Solid State Drive on application software. The primary audience for this document includes individuals, publications, OEMs and technical analysts whose goal is to test or evaluate the performance benefits and features of the Intel Solid State Drive. If there are questions that are not answered here on software application performance evaluation of the Intel Solid State Drive, please contact your Intel representative. Each software application test measures different aspects of processor and/or system performance. While no single numerical measurement can completely describe the performance of a complex device like a microprocessor or a personal computer, application tests can be useful tools for comparing different components and systems. The following results and procedures give a glimpse of the performance of certain software applications, however your own usage of each application may vary from what is shown here. The only totally accurate way to measure the performance of your system, is to test the actual software applications you use, in the way you use them, on your computer system. Test results published by Intel are measured on specific systems or components using specific hardware and software configurations, and any differences between those configurations (including software) and your configuration may make those results inapplicable to your component or system. Software application tests are, at most, only one kind of information that you may use during the purchasing process. To get a true picture of the performance of a component or system you are considering purchasing, you must consult other sources of information (such as performance information on the exact system you are considering purchasing). If you have any questions about the performance of any Intel product, please view the detailed performance briefs and reports published by Intel or call Intel at (US) or

4 Chapter 1 Performance on Blizzard* World of Warcraft* and Microsoft* Windows* Defender* 1.0 Application Description Blizzard* World of Warcraft* is a popular massively multiplayer online role playing game (MMORPG) featuring an immersive online world where you can experience adventure as one of 8 unique races and 10 different character classes. Players can also learn professions and skills as well as interact with other players. World of Warcraft has over 9 million subscribers and continuing patch updates and expansion packs allow for a gaming experience that continues to evolve and grow. Microsoft* Windows* Defender* is software that helps protect computers against pop-ups, slow performance and security threats caused by spyware and other unwanted software by detecting and removing known spyware from users computers. Windows Defender features real-time protection, a monitoring system that recommends actions against spyware when it s detected, minimizes interruptions and helps users stay productive. 1.1 Workload Description An online gamer updates his World of Warcraft installation to a new version in order to support new game content and continue his gaming experience online. At the same time, the gamer s system begins an automated spyware scan at a pre-appointed time using Microsoft* Windows* Defender (this version comes with Vista SP1). The World of Warcraft update involves applying the World of Warcraft patch to the installed game files. The Windows Defender workload for this scenario is a folder containing 40,761 files totaling approximately 8 GB and composed of files found in the Windows directory.

5 Chapter 2 Measurement Methodology The following is a description of the measurement methodology that should be used to evaluate performance and energy efficiency of the mobile platform while running this scenario. 2.0 System Setup This section outlines the system setup recommended for all benchmarks under Microsoft Windows* Vista Ultimate Edition: Always start with a clean, formatted hard disk. Set your system to boot from CD/DVD drive in the bios. Begin installation Windows* Vista Ultimate Edition* from the operating system CD. Format the file system to NTFS during installation if the drive if you have not already done so. After installation of the OS is complete restart your system. Immediately after installing the Windows Vista operating system, install the latest drivers (INF files) to allow the operating system to recognize the chipset and all the components on the motherboard. The drivers can be downloaded from the chipset software link at Install the latest Intel Matrix Storage Manager. The install file can be downloaded from the chipset software link at (Windows Vista installs the basic driver for Intel Matrix Storage, and you should update the driver once the OS boots up.) The Intel Matrix Storage Driver can provide better system performance because features like Native Command. Some system benchmarks with an I/O component, like BAPCo* SYSmark*, may show increased performance with the Intel Matrix Storage Driver installed and the system set to raid-ready. Install the Intel integrated sound driver from or from your motherboard CD. Install the latest LAN driver from Download and Install the latest Windows Vista graphics driver for your graphics card from the manufacturer website. The table below describes how to perform an initial setup of Windows Vista.

6 Microsoft Windows* Vista Setup Setting Description of how to set up Windows Vista Windows Aero Search Indexing Internet Offline Files Screen saver Power Management Vista Desktop Display resolution, monitor refresh Remove always on top Remove hide inactive icons Enable Enable Enable High Performance Custom Ensure Windows Aero is enabled - Right click on desktop -> Personalize -> Window color and appearance -> click on "Open classic appearance properties for more color options - Ensure "Windows Aero" is checked. Note: In order for Aero to work on Intel Graphics Media Accelerator X3000 and 3000, Vista drivers should be installed prior to setup Aero feature in Vista. Leave Search Indexing Enabled - You can check if Search Indexing is enabled by Open Control Panel -> System and Maintenance -> Indexing Options. The Indexing location will include: Offline Files, Start Menu, and Users. Leave Internet Offline files Enabled - You can check if Offline files is enabled, Open Control Panel -> Network and Internet -> Offline Files. On the general tab, the " Offline Files" button should appear. Right click on desktop -> Personalize -> Screen Saver. Set the screen saver to "None" Right click on desktop -> Personalize -> Screen Saver -> Change Power settings -> Select "High Performance" and click "Change plan settings" below this option. A new view will appear called "Edit Plan Settings." Change "Turn off display" to "Never." Click Save Change. (Note: Exceptions include MobileMark* and other standardized benchmarks that measure battery life; these should be run with their own power management settings.) Right click on desktop -> Personalize -> Display Settings. In the "Display Settings" dialog choose Resolution=1024x768 and Colors= Highest (32bit). Click the "Advanced Settings" button. Select the "Monitor" tab and change the "Screen refresh rate" to 75 Hz. Right click on Windows task bar at the bottom -> Properties - > Taskbar -> uncheck "Keep the taskbar on top of other windows" Right click on Windows task bar at the bottom -> Properties - > Select the "Notification area" tab and uncheck "Hide inactive icons"

7 Windows "Welcome screen" System Protection (previously System Restore ) Security Center Alerts Adjust Folder Options for hidden files backup on Recycle bin Windows Sidebar Disk Defragmentation User Account Control Custom Open Control Panel -> System and Maintenance -> Welcome Center, Uncheck "Run at Startup" at the bottom of the Windows Welcome screen Open Control Panel -> System and Maintenance -> System. Under the tasks link on the left side select System Protection. Uncheck "Local Disk" found in the "Automatic restore points" section. Open Control Panel -> Security Center. On the left side at the bottom click on the link, "Change the way Security Center alerts me." In the dialog select "Don't notify me and don't display the icon (not recommended)" Open Control Panel -> Appearance and Personalization -> Folder Options. On the view tab select "Show hidden files and folder" uncheck "Hide extensions for known file types" and uncheck "Hide protected operating system files (Recommended)" Right click on the recycle bin and choose properties. On the general tab select "Do not move files to the Recycle Bin. Remove files immediately when deleted" Remove "Windows Sidebar" by right click on the Windows sidebar, click properties, Uncheck "Start Sidebar when windows Starts" Click on "My Computer", right click on the C: drive. Click "Properties", "Tools", "Defragment Now". Uncheck "Run on Schedule" Open Control Panel -> User Accounts and Family Safety -> User Accounts -> Turn User Account Control on or off -> Continue -> Uncheck Use User Account Control (UAC) to help protect your computer -> OK -> Restart Computer 2.1 Evaluation of Platform Performance This section outlines the recommended methodology for evaluating platform performance. Clean up Windows prefetch 1. Delete the contents of the c:\windows\prefetch directory between testing of individual benchmarks. Allow your system to settle into an idle state:

8 1. Reboot your computer. 2. Open the Task Manager by right clicking on the Taskbar and clicking the option for Task Manager. Click on the Performance tab in the Task Manager. 3. Click on the Resource Monitor button in the Task Manager. This will bring up the Resource Monitor Window below. 4. Click on the panel that says Disk. This will allow you to view the various active requests to the disk drive. 5. Watch the Resource Monitor. The number of requests to the disk will gradually decline. Wait until there are no more requests to the disk as shown below. 6. After there are no more requests to disk, close the Resource Monitor. Process Idle Tasks 1. Call the ProcessIdleTasks API from advapi32.dll using the command line or create and execute a batch file with the following command: rundll32.exe advapi32.dll,processidletasks Training Runs: 1. Run the workload at least 5 times in a row. 2. Process Idle tasks between each training run. 3. Do not reboot between training runs. Benchmark Run: 1. After you have run the ProcessIdleTasks API, run the workload 5 times in a row without reboots in between each run. 2. Take the median of the 5 runs. 2.2 Evaluation of Mobile Platform Energy Efficiency This section outlines the recommended methodology for evaluating platform energy efficiency.

9 2.2.1 Procedure for Measuring Energy Efficiency When measuring energy consumption of a system running a given benchmark, the power consumption of the total platform should be measured by an external watt-meter or power analyzer. One common tool used to measure power is the Extech Power Analyzer Datalogger. The Extech unit allows the measurement of both AC and DC power measurement and includes software to log the power consumption of the test system on another computer system. When measuring the DC power consumption of a system, you will need to isolate the positive and negative power lines running between the notebook power adapter and the system. From the power adapter, attach the power lines to the appropriate red and black power terminals of the Input Voltage on the Extech unit. Then attach the power lines from the notebook plug to the red and black power terminals of the Output Load of the Extech unit. Using the Datalogger software, record the power consumption of the system for the duration of the benchmark using 1.0 second sampling intervals. From the resulting power log, you can derive the average DC power consumption (in Watts) of the system while executing the benchmark. When measuring the AC power consumption of a system, plug a power cord into the Input Voltage on the Extech unit and into an electrical socket. Then plug in the system s AC power adapter into the Output Load of the Extech unit. Using the Datalogger software, record the power consumption of the system for the duration of the benchmark using 1.0 second sampling intervals. From the resulting power log, you can derive the average AC power consumption (in Watts) of the system while executing the benchmark. Power measurement should begin when the timed portion of the workload begins and should stop when the timed portion of the workload ends. If using the provided script for the scenario then you will be prompted by the script when to start and stop power measurement Calculating Workload Energy Consumption in Watt-Hours Analysis of power consumption results should be performed using the following methodology: Calculate the Workload Energy Consumption (WEC) in Watt-seconds by multiplying the average total AC or DC power usage (Ptotal) times the time taken to complete the workload (tworkload). WEC (Watt-seconds) = Ptotal tworkload Convert the WEC measurement into Watt-hours (Wh) by dividing the WEC in Watt-seconds by 3600 (the number of seconds in an hour). WEC (Wh) = WEC (Watt-seconds) 3600 The resulting quotient in Watt-hours is the amount of energy consumed by the system in completion of the workload.

10 Chapter 3 Procedure for Evaluating Performance The following is a procedure for evaluating performance using Blizzard World of Warcraft and Microsoft Windows Defender Run this test on a system running Windows* Vista with Service Pack 1. Setting up Blizzard World of Warcraft and Microsoft Windows Defender Install World of Warcraft on your system. 2. Download the patch files to update your World of Warcraft installation on your system. This patch can be obtained at: ( &pagenumber=1 Download the following patch updates: Version Upgrade Patch Version 1.12.x to Upgrade Patch Version 2.0.x to Full Patch These patch files should be placed in your C;\Program Files\World of Warcraft directory. 3. Run the Version Upgrade patch to update the World of Warcraft installation to Run the Version 1.12.x to Upgrade Patch to update the World of Warcraft installation to Copy your Windows Defender workload directory to the hard disk. 6. Windows Defender comes preinstalled as a feature in the Windows Vista operating system. Be sure to have Windows Vista Service Pack 1 installed to be sure that the correct version is installed. (Service Pack 1 can be downloaded at cb3d06d12674&displaylang=en) Do not perform any online updates with the test system. 7. Make a backup image of your hard disk in its current state. We recommend using Symantec Ghost to create disk images. These images will be used to restore the disk to it s pre-tested state.

11 Running Blizzard World of Warcraft and Microsoft Windows Defender Boot/Reboot your system. 2. Open an explorer window and navigate to your c:\program Files\World of Warcraft directory. Arrange your window so that the patch file is easily accessible. 3. Launch Windows Defender by clicking on the Start Menu, clicking on All Programs and selecting Windows Defender. 4. At the top of the Defender window, click on the arrow to the right of Scan and then select Custom Scan Under Select scan options, select Scan selected drives and folders 6. Click on the Select button. 7. Navigate to and check the checkbox beside your workload directory. Click on OK. 8. Click on Scan Now to begin the Windows Defender scan. 9. Quickly navigate to your explorer window and double click on the patch file to begin the World of Warcraft update process. Simultaneously start your stopwatch. 10. When the World of Warcraft update process has been completed, the Blizzard Updater application window will indicate 100% and will state at the bottom, The update was successful. Stop your stopwatch. This time is your foreground task time. 11. When the scan completes, Windows Defender will display Scan statistics. One of those statistics will be the Time Elapsed. This is your background task time. Compare this time to your foreground task time. The longer of the two times is your total task completion time for this scenario. 12. Close Windows Defender. 13. Shut down your system and restore your disk to it s pre-tested state before repeating the test. 14. Repeat steps 1-13 four more times and record the runtimes as your data. The median value of the five total task completion times is the median runtime for this scenario.