Ultrasonic distance measuring sensors
|
|
- Alice Hutchinson
- 7 years ago
- Views:
Transcription
1 Ultrasonic distance measuring sensors
2 Introduction Sensors with potentiometer Sensors with OUT max min The sensor provides a distance proportional analog current or analog, allowing simply applied, non-contact distance measurement. The user can change the slope of the curve using the built-in potentiometer. By doing so, they are able to define the required. Sensor versions, which have a built-in D/A-Converter, generate s divided into discrete steps. Applications having long cable runs where there might be EMI or RFI interferences, should use sensors with an analog. Adjustment of... 1 V function To switch the sensor into Teach mode, hold the button, or connect the external wire (WH) to for 2 seconds or more. Successful entry into Teach-mode is signaled by the flashing bicolor. Upon release of the Teach button or disconnection of external Teach wire from the source, the red will flash. At this point, you may set the close limit (Sdc) by placing the target at the required distance from the sensor (the closest the target will be to the sensor face) and briefly pushing the button or connecting the wire with. The will then flash Amber. Far limit (Sde) may now be programmed by placing the target at the farthest required distance from the sensor by briefly pressing the button or connecting the wire with + VS. Both s will be on for 2 seconds to confirm proper completion of process. ma / 1 V inverted 4 ma / V Distance Measuring range Sensor St scanning range Sd Blind region Measuring distance Sde Measuring range configured by Standard measuring range Object Sd Programmable curve Optional on request Separate digital PNP with one switching point which may be set using the function. Inverting the function to 1... V Sensor can be inverted to 1... V by teaching the far limit Sde first and the sensor close limit Sdc second. Resetting to original factory settings or improper set up Teaching the sensor without an object within its scanning range, teaching only one instead of the required two limits of the scanning range or simply pressing the button for more than 6 seconds will automatically restore the original factory settings. Fast flashing of both s indicates successful completion of the resetting. locking The function is locked five minutes after power up or five minutes after the end of the last process distributed by
3 Linearity Minimum load resistance Resolution Deviations in linearity are mainly generated within the sensor and by changes in ambient temperature. Resolution, and define the linearity error. The voltage drop across the load resistance is proportional to the current, using a sensor with. To ensure a proper functioning of the stage do not exceed the maximum permissible load resistance as stated in the data sheet. Defines the smallest position change of the object which causes a change in voltage or current at the sensor. Introduction 619
4 Overview rectangular designs product family UNDK 1 UNDK UNDK UNDK UNDK 3 UNDK 3 UNDK 3 Overview cylindrical designs SONUS 1,4 mm mm mm mm 3 mm 3 mm 3 mm... mm... mm mm mm mm mm mm potentiometer <,5 mm <,5 mm <,5 mm <,5 mm <,5 mm <,5 mm <,5 mm operating temperature C C C C C C C plastic (ASA) polter polter polter polter / die-cast zinc polter / die-cast zinc polter / die-cast zinc cable, 2 m flylead connector M8 connector M8 connector M12 IP 67 IP 67 IP 67 IP 67 IP 67 IP 67 Page product family UNAM 12 UNAM 12 UNAM 12 UNAR 18 UNAM 18 UNAR 18 UNAM 3 12 mm 12 mm 12 mm 18 mm 18 mm 18 mm 3 mm mm... mm mm mm mm mm mm potentiometer external <,5 mm <,5 mm <,5 mm <,5 mm <,5 mm <,5 mm <,5 mm operating temperature C C C C C C C brass nickel plated brass nickel plated brass nickel plated stainless steel (V4A) brass nickel plated stainless steel (V4A) brass nickel plated cable, 2 m connector M12 IP 67 IP 67 IP 67 IP 67 IP 67 IP 67 Page
5 Overview UNDK 3 3 mm... mm Overview < 1 mm C polter / die-cast zinc IP UNAM 5 3 mm mm < 1 mm C brass nickel plated IP
6 UNDK 1 (Sd = mm) SONUS UNDK 1 Sd = mm compact housing very low mass (4 g) high SONUS UNDK 1 Sd = mm... mm scanning range close limit Sdc... mm scanning range far limit Sde... mm <,5 mm <,3 mm adjustment 38 khz < 6 ms < 6 ms yellow / red voltage supply range +Vs VDC circuit... 1 V / 1... V < ma reverse polarity protection rectangular plastic (ASA) 1,4 mm 27 mm depth 14 mm operating temperature C ESW 31A, ESG 32A order reference connection s UNDK 1U6914 cable, 2 m UNDK 1U6914/KS35A flylead connector M8 UNDK 1U6914/S35A connector M8 dimension drawings , ,9 3,2 2,9 15 4, ,9 M8 x 1 2,9 2,9 1,4 7 1,4 flylead connector version standard cable length mm (L) , ,9 34 L 1,4 M8 x 1 BN (1) BK (4) BU (3) WH (2) 3,2 V control/teach-in 2,9 2, standard square target, size 15 x 15 mm, positioned perpendicularly to sensor's reference axis 3,2 2,
7 UNDK (Sd = mm) UNDK Sd = mm internal and external... 1 V / 4... ma invertible small sonic beam angle... mm scanning range close limit Sdc... mm scanning range far limit Sde... mm <,5 mm <,3 mm adjustment 38 khz < 3 ms < 3 ms yellow / red voltage supply range +Vs VDC < ma reverse polarity protection... 1 V / 1... V 4... ma /... 4 ma load resistance +Vs max. < 11 Ohm < 4 Ohm rectangular polter mm 42 mm depth 15 mm connection s connector M8 operating temperature C ESW 31A, ESG 32A dimension drawing Teach- in 3,2 29,5 9,5 42 M8 x 1 5,7 14 6,5 BN (1) BK (4) BU (3) WH (2) 15 11,8 V control/teach-in standard square target, size 15 x 15 mm, positioned perpendicularly to sensor's reference axis Sd = mm UNDK order reference UNDK I6914/S35A UNDK U6914/S35A circuit 623
8 UNDK (Sd = 4 mm) UNDK Sd = 4 mm internal and external... 1 V / 4... ma invertible wide sonic beam angle Sd = 4 mm UNDK mm scanning range close limit Sdc mm scanning range far limit Sde mm <,5 mm <,3 mm adjustment 29 khz < 6 ms < 6 ms yellow / red voltage supply range +Vs VDC < ma reverse polarity protection... 1 V / 1... V current consumption max. 55 ma 4... ma /... 4 ma load resistance +Vs max. < 11 Ohm < 4 Ohm rectangular polter mm 42 mm depth 15 mm connection s connector M8 operating temperature C ESW 31A, ESG 32A dimension drawing Teach- in 3,2 14 9,5 29,5 42 M8 x 1 5,7 6,5 BN (1) BK (4) BU (3) WH (2) V ,8 control/teach-in standard target with 3 x 3mm, directed rectangular to sensor's reference axis order reference UNDK I6912/S35A UNDK U6912/S35A circuit 624
9 UNDK (Sd = 1 mm) UNDK Sd = 1 mm internal and external... 1 V / 4... ma invertible long sensing range mm scanning range close limit Sdc mm scanning range far limit Sde mm <,5 mm <,3 mm adjustment 24 khz < 8 ms < 8 ms yellow / red voltage supply range +Vs VDC < ma reverse polarity protection... 1 V / 1... V current consumption max. 55 ma 4... ma /... 4 ma load resistance +Vs max. < 11 Ohm < 4 Ohm rectangular polter mm 42 mm depth 15 mm connection s connector M8 operating temperature C ESW 31A, ESG 32A dimension drawing Teach- in 3,2 29,5 9,5 42 M8 x 1 5,7 14 6,5 BN (1) BK (4) BU (3) WH (2) 15 11,8 V control/teach-in standard target with 3 x 3 mm, directed rectangular to sensor's reference axis Sd = 1 mm UNDK order reference UNDK I693/S35A UNDK U693/S35A circuit 625
10 UNDK 3 (Sd = 25 mm) UNDK 3 Sd = 25 mm or potentiometer... 1 V / 4... ma signals of version invertible Sd = 25 mm UNDK mm scanning range far limit Sde mm <,5 mm <,3 mm 3 khz < 5 ms < 5 ms potentiometer green scanning range close limit Sdc mm yellow / red voltage supply range +Vs VDC < ma reverse polarity protection current consumption max. 55 ma load resistance +Vs max. < 11 Ohm < 4 Ohm rectangular polter / die-cast zinc 3 mm 65 mm depth 31 mm operating temperature C ESW 33S, ESG 34S dimension drawings 4,5 3 31,1 18, , ,4 = or potentiometer BN (1 ) BK (4 ) BU (3 ) V 4,5 3 31,1 Teach- in 18, , ø 13, standard square target, size 15 x 15 mm, positioned perpendicularly to sensor's reference axis 11,4 order reference adjustment circuit connection s UNDK 3I ma /... 4 ma cable, 2 m UNDK 3I6113/S ma /... 4 ma connector M12 UNDK 3U V / 1... V cable, 2 m UNDK 3U6113/S V / 1... V connector M12 UNDK 3U9113 potentiometer... 1 VDC cable, 2 m UNDK 3U9113/S14 potentiometer... 1 VDC connector M12 626
11 UNDK 3 (Sd = 4 mm) UNDK 3 Sd = 4 mm or potentiometer... 1 V / 4... ma signals of version invertible mm scanning range far limit Sde mm <,5 mm <,3 mm 4 khz < 6 ms < 6 ms potentiometer green scanning range close limit Sdc mm yellow / red voltage supply range +Vs VDC < ma reverse polarity protection current consumption max. 55 ma load resistance +Vs max. < 11 Ohm < 4 Ohm rectangular polter / die-cast zinc 3 mm 65 mm depth 31 mm operating temperature C ESW 33S, ESG 34S dimension drawings 4,5 3 31,1 18, , ,4 = or potentiometer BN (1 ) BK (4 ) BU (3 ) V 4,5 3 31,1 Teach- in 18, , ø 13, standard target with 3 x 3mm, directed rectangular to sensor's reference axis 11,4 Sd = 4 mm UNDK 3 order reference adjustment circuit connection s UNDK 3I ma /... 4 ma cable, 2 m UNDK 3I6112/S ma /... 4 ma connector M12 UNDK 3U V / 1... V cable, 2 m UNDK 3U6112/S V / 1... V connector M12 UNDK 3U9112 potentiometer... 1 VDC cable, 2 m UNDK 3U9112/S14 potentiometer... 1 VDC connector M12 627
12 UNDK 3 (Sd = 1 mm) UNDK 3 Sd = 1 mm or potentiometer... 1 V / 4... ma signals of version invertible Sd = 1 mm UNDK mm scanning range far limit Sde mm <,5 mm <,3 mm 24 khz < 8 ms < 8 ms potentiometer green scanning range close limit Sdc mm yellow / red voltage supply range +Vs VDC < ma reverse polarity protection current consumption max. 55 ma load resistance +Vs max. < 11 Ohm < 4 Ohm rectangular polter / die-cast zinc 3 mm 65 mm depth 31 mm operating temperature C ESW 33A, ESG 34A dimension drawings 3 31,1 3 31,1 18,4 Teach- in 18,4 4,5 37, ,5 37, ,4 ø 13,2 11, = or potentiometer BN (1 ) BK (4 ) BU (3 ) V standard target with 3 x 3 mm, directed rectangular to sensor's reference axis order reference adjustment circuit connection s UNDK 3I ma /... 4 ma cable, 2 m UNDK 3I613/S ma /... 4 ma connector M12 UNDK 3U V / 1... V cable, 2 m UNDK 3U613/S V / 1... V connector M12 UNDK 3U913 potentiometer... 1 VDC cable, 2 m UNDK 3U913/S14 potentiometer... 1 VDC connector M12 628
13 UNDK 3 (Sd = mm) UNDK 3 Sd = mm... 1 V / 4... ma s invertible... mm scanning range close limit Sdc... mm scanning range far limit Sde... mm < 1 mm <,5 mm adjustment khz < 15 ms < 15 ms yellow / red voltage supply range +Vs VDC < ma reverse polarity protection... 1 V / 1... V current consumption max. 55 ma 4... ma /... 4 ma load resistance +Vs max. < 11 Ohm < 4 Ohm rectangular polter / die-cast zinc 3 mm 65 mm depth 31 mm operating temperature C ESW 33A, ESG 34A dimension drawings 3 31,1 3 18,4 4,5 37, ,5 37, ,4 ø 13,2 14 BN (1 ) BK (4 ) BU (3 ) V 31,1 18,4 11, standard target with 1 x 1 mm, positioned perpendicularly to sensor's reference axis Sd = mm UNDK 3 order reference circuit connection s UNDK 3I614/S14 connector M12 UNDK 3U614 cable, 2 m UNDK 3U614/S14 connector M12 629
14 UNAM 12 (with beam columnator) UNAM 12 Sd = 82 mm external with beam columnator for measurement in very small containers Sd = 82 mm UNAM 12 special with beam columnator mm scanning range close limit Sdc mm scanning range far limit Sde mm <,5 mm <,3 mm adjustment external 38 khz < 3 ms < 3 ms yellow / red voltage supply range +Vs VDC circuit... 1 V / 1... V < ma reverse polarity protection cylindrical brass nickel plated 12 mm 88 mm connection s connector M12 operating temperature C teach-in-adapter Nr ESW 33A, ESG 34A dimension drawing SW 17 ø 15 ø 8 ø 3 14 BN (1) BK (4) BU (3) WH (2) 3,5 42,5 57, V control/teach-in with standard target round rod ø 1 mm target distance from nozzle of columnator (mm) standard target 15 x 15 mm and round rod ø 1 mm, directecd rectangular to sensor s reference axis order reference UNAM 12U9914/S14D 63
15 UNAM 12 (Sde = mm) UNAM 12 Sd = mm external... 1 V /... 1 ma invertible adapter... mm scanning range close limit Sdc... mm scanning range far limit Sde... mm <,5 mm <,3 mm adjustment external 38 khz < 3 ms < 3 ms yellow / red voltage supply range +Vs VDC < ma reverse polarity protection... 1 V / 1... V current consumption max. 45 ma... 1 ma / 1... ma load resistance +Vs max. < 11 Ohm < 4 Ohm cylindrical brass nickel plated 12 mm 7 mm connection s connector M12 operating temperature C teach-in-adapter Nr ESW 33A, ESG 34A dimension drawing SW BN (1) BK (4) BU (3) WH (2) V control/teach-in standard square target, size 15 x 15 mm, positioned perpendicularly to sensor's reference axis Sd = mm UNAM 12 order reference UNAM 12I9914/S14 UNAM 12U9914/S14 circuit 631
16 UNAM 12 (Sde = 4 mm) UNAM 12 Sd = 4 mm external... 1 V /... 1 ma invertible adapter Sd = 4 mm UNAM mm scanning range close limit Sdc mm scanning range far limit Sde mm <,5 mm <,3 mm adjustment external 29 khz < 6 ms < 6 ms yellow / red voltage supply range +Vs VDC < ma reverse polarity protection... 1 V / 1... V current consumption max. 45 ma... 1 ma / 1... ma load resistance +Vs max. < 11 Ohm < 4 Ohm cylindrical brass nickel plated 12 mm 7 mm connection s connector M12 operating temperature C teach-in-adapter Nr ESW 33A, ESG 34A dimension drawing SW 17 BN (1) BK (4) BU (3) WH (2) V control/teach-in standard target with 3 x 3mm, directed rectangular to sensor's reference axis order reference UNAM 12I9912/S14 UNAM 12U9912/S14 circuit 632
17 UNAR 18 (Sde = 4 mm) UNAR 18 Sd = 4 mm internal and external sensorfront chemically resistant stainless steel housing special scanning range close limit Sdc scanning range far limit Sde adjustment voltage supply range +Vs reverse polarity protection current consumption max. current consumption max. load resistance +Vs max. chemically resistant mm mm mm <,5 mm <,3 mm 4 khz < 25 ms < 25 ms yellow / red VDC < ma 35 ma... 1 V / 1... V 55 ma 4... ma /... 4 ma < 11 Ohm < 4 Ohm cylindrical stainless steel (V4A) coating active face Parylene material O-ring FFKM front of sensor durable against 6 bar, cycle pressure 18 mm 91,5 mm connection s connector M12 operating temperature C ESW 33A, ESG 34A dimension drawing SW 24 Teach- in M18 x 1 71,6 BN (1) BK (4) BU (3) WH (2) 81, ,5 V control/teach-in standard target with 3 x 3mm, directed rectangular to sensor's reference axis Sd = 4 mm UNAR 18 order reference UNAR 18I6912/S14G UNAR 18U6912/S14G circuit 633
18 UNAM 18 UNAM 18 Sd = 1 mm internal and external... 1 V / 4... ma s invertible Sd = 1 mm UNAM mm scanning range close limit Sdc mm scanning range far limit Sde mm <,5 mm <,3 mm adjustment 24 khz < 8 ms < 8 ms yellow / red voltage supply range +Vs VDC < ma reverse polarity protection... 1 V / 1... V current consumption max. 55 ma 4... ma /... 4 ma load resistance +Vs max. < 11 Ohm < 4 Ohm cylindrical brass nickel plated 18 mm 9 mm connection s connector M12 operating temperature C ESW 33A, ESG 34A dimension drawing M18 x 1 SW 24 BN (1) BK (4) BU (3) WH (2) V control/teach-in standard target with 3 x 3 mm, directed rectangular to sensor's reference axis order reference UNAM 18I693/S14 UNAM 18U693/S14 circuit 634
19 UNAR 18 (Sde = 1 mm) UNAR 18 Sd = 1 mm internal and external sensorfront chemically resistant stainless steel housing special scanning range close limit Sdc scanning range far limit Sde adjustment voltage supply range +Vs reverse polarity protection current consumption max. current consumption max. load resistance +Vs max. chemically resistant mm mm mm <,5 mm <,3 mm 24 khz < 8 ms < 8 ms yellow / red VDC < ma 35 ma... 1 V / 1... V 55 ma 4... ma /... 4 ma < 11 Ohm < 4 Ohm cylindrical stainless steel (V4A) coating active face Parylene material O-ring FFKM front of sensor durable against 6 bar, cycle pressure 18 mm 91,5 mm connection s connector M12 operating temperature C ESW 33A, ESG 34A dimension drawing M18 x 1 SW 24 Teach- in BN (1) BK (4) BU (3) WH (2) 71,6 81,5 91,5 V control/teach-in standard target with 3 x 3 mm, directed rectangular to sensor's reference axis Sd = 1 mm UNAR 18 order reference UNAR 18I693/S14G UNAR 18U693/S14G circuit 635
20 UNAM 3 UNAM 3 Sd = 1 mm or potentiometer... 1 V / 4... ma signals of version invertible Sd = 1 mm UNAM mm scanning range far limit Sde mm <,5 mm <,3 mm 24 khz < 8 ms < 8 ms potentiometer green scanning range close limit Sdc mm yellow / red voltage supply range +Vs VDC < ma reverse polarity protection current consumption max. 55 ma load resistance +Vs max. < 11 Ohm < 4 Ohm cylindrical brass nickel plated 3 mm 7 mm operating temperature C ESW 33S, ESG 34S dimension drawings M3 x 1,5 SW 36 58, = or potentiometer BN (1 ) BK (4 ) BU (3 ) V M3 x 1,5 SW 36 Teach- in 58, standard target with 3 x 3 mm, directed rectangular to sensor's reference axis order reference version adjustment circuit connection s UNAM 3I613 standard 4... ma /... 4 ma cable, 2 m UNAM 3I613/S14 standard 4... ma /... 4 ma connector M12 UNAM 3I683/S14 multiplex version 4... ma /... 4 ma connector M12 UNAM 3U613 standard... 1 V / 1... V cable, 2 m UNAM 3U613/S14 standard... 1 V / 1... V connector M12 UNAM 3U913 standard potentiometer... 1 VDC cable, 2 m UNAM 3U913/S14 standard potentiometer... 1 VDC connector M12 636
21 UNAM 5 UNAM 5 Sd = 25 mm or potentiometer... 1 V / 4... ma signals of version invertible mm scanning range far limit Sde mm < 1 mm <,3 mm 1 khz < 16 ms < 16 ms potentiometer green scanning range close limit Sdc mm yellow / red voltage supply range +Vs VDC < ma reverse polarity protection current consumption max. 55 ma load resistance +Vs max. < 11 Ohm < 4 Ohm cylindrical brass nickel plated 3 mm 95 mm operating temperature C ESW 33S, ESG 34S dimension drawings ø 44,5 SW 36 M3 x 1,5 58,5 7 14, = or potentiometer BN (1 ) BK (4 ) BU (3 ) V ø 44,5 SW 36 M3 x 1,5 Teach- in 58,5 7 14, standard target with 1 x 1 mm, positioned perpendicularly to sensor's reference axis Sd = 25 mm UNAM 5 order reference adjustment circuit connection s UNAM 5I ma /... 4 ma cable, 2 m UNAM 5I6121/S ma /... 4 ma connector M12 UNAM 5U V / 1... V cable, 2 m UNAM 5U6121/S V / 1... V connector M12 UNAM 5U9121 potentiometer... 1 VDC cable, 2 m UNAM 5U9121/S14 potentiometer... 1 VDC connector M12 637
22 638
Technical data. General specifications. Indicators/operating means. 30 Hz Multiplex operation 30 Hz / n, n = number of sensors, n 5
Model Number Single head system Features Parameterization interface for the application-specific adjustment of the sensor setting via the service program ULTRA 000 programmable switch outputs Hysteresis
More informationTechnical data. General specifications. Indicators/operating means. Electrical specifications Operating voltage U B Power consumption P 0 Interface
Release date: 06-0- 09: Date of issue: 06-0- 009_eng.xml Model Number Single head system Features Parameterization interface for the application-specific adjustment of the sensor setting via the service
More informationMagnetic proximity switches
Magnetic proximity switches Magnetic proximity switches Overview Page 38 Functional principle and installation Page 39 Cylindrical designs Page 41 Rectangular designs Page 42 37 Kurzübersicht Magnetoresistive
More informationTubular Analog model resolution: 0,5 mm (SLOW mode), 1 mm (FAST mode) Right angle Repeatibility: 0,7 mm Vdc
Ultrasonic sensors for high precision detection of clear and transparent objects Clear object detection, inspection on transparent or highly reflective film and liquid level measurement Standard M18 tubular
More informationTechnical data. General specifications. Signal voltage 15... 30 V DC Signal duration. 1 s Input 2. Signal voltage. 1 s Analog output.
Model Number Features Very small housing High climatic resistance 4 Bit multiturn Analog output Surge and reverse polarity protection Description This absolute rotary encoder with internal magnetic sampling
More informationLaser diffuse reflection light scanner with background suppression. Dimensioned drawing
Specifications and description HRTL 3B Laser diffuse reflection light scanner with background suppression Dimensioned drawing We reserve the right to make changes DS_HRTL3B_en.fm en 01-2010/12 50114049
More informationcrm+25/d/tc/e Extract from our online catalogue: Current to: 2015-10-26
Extract from our online catalogue: crm+25/d/tc/e Current to: 2015-10-26 microsonic GmbH / Phoenixseestraße 7 / 44263 Dortmund / Germany / T +49 231 975151-0 / F +49 231 975151-51 / E info@microsonic.de
More informationOperating instructions Diffuse reflection sensor. OJ50xx 701396 / 01 07 / 2004
Operating instructions Diffuse reflection sensor OJ50xx 7096 / 0 07 / 004 Contents Preliminary note. Symbols used Function and features Installation. Installation of the supplied mounting fixture 4 4 Electrical
More informationColor Mark Sensor with Red or Green LED E3S-VS
Color Mark Sensor with Red or Green LED Rugged IP67 Color Mark Sensor 1 ms response time Detects a wide variety of color marks PNP or NPN output ls Light-on/ Dark-on operation, wire selectable Vertical
More informationOperating instructions Optical distance sensor O1D100 O1D103 704991 / 00 08 / 2012
Operating instructions Optical distance sensor UK O1D100 O1D103 704991 / 00 08 / 2012 Contents 1 Preliminary note4 1.1 Symbols used 4 1.2 Warning signs used 4 2 Safety instructions 4 3 Functions and features
More informationSENSORS. Miniature Sensors - S3Z. Advanced line of miniature Asian style of photoelectric sensors. 40-300 mm background suppression
Advanced line of miniature Asian style of photoelectric sensors 4-3 background suppression.7 m proximity, 15 with narrow beam 4 m polarized retroreflective 3 m LASER through beam Standard 3-wire output
More informationPD30ETB20xxIS. Photoelectrics, Background Suppression reflective with IR light. Main features. Description
Photoelectrics, Background Suppression reflective with IR light Main features Description The PD30ET... stainless steel sensors are built with high-quality materials and designed for harsh environments.
More informationClear Glass Sensor. Ordering Information E3S-CR67/62. Optimum Sensor for Detecting Transparent Glass and Plastic Bottles
Clear Glass Sensor Optimum Sensor for Detecting Transparent Glass and Plastic Bottles E3S-CR67/62 Retroreflective Sensor smoothly detects 5-mm gaps. Detects transparent bottles that have a lens effect.
More informationFast, reliable, ultra-precise. My-Com precision switches.
Fast, reliable, ultra-precise.. Unrivaled 1 μm repeat accuracy Setting reference points, monitoring tolerances, controlling, adjusting. Fast, reliable, ultra-precise. Uncompromising accuracy tried and
More informationCapacitive sensors. Versatile, contactless, durable Edition 2012/2013
Capacitive sensors Versatile, contactless, durable Edition 2012/2013 With capacitive sensors from Baumer you can complete almost any task. Invative all-rounders. Capacitive sensors can detect metallic,
More informationSENSORS. Fiber Optic Sensors - S70. Advanced fiber optic amplifiers for high speed and low contrast applications
Fiber Optic Sensors - S7 Advanced fiber optic amplifiers for high speed and low contrast applications DIN rail mountable models with dual digital displays speed models: 2 μs...5 ms Super high speed models:
More informationHow To Make An Ultrasonic Sensor
crm+ ultrasonic sensors Microsonic : TR Electronic: Tel: +49 231 975151-0 USA: 248-244-2280 Fax: +49 231 975151-51 Canada: 519-452-1233 www.microsonic.de www.trelectronic.com info@microsonic.de Description
More informationCompact Sensors - S8 Series. Compact size and high performance for the most challenging detection applications
Compact size and high performance for the most challenging detection applications Compact dimensions (14x42x25 mm) Background suppression for transparent and shiny objects High speed contrast sensor up
More informationHow To Control A Power Supply With A Mini Transmitter And Switch (Power Supply)
transmitter (2 wire) / switch for continuous or On/Off Control Indication, monitoring, transmitting and continuous or On/Off control in one device Output signal 4...20 ma, 2-wire for continuous control
More informationBOS 73K... BOS 74K...
BFB/BOS When there s no space for a photoelectric sensor, there is only one solution: user fiber optics! If there are no particular demands for toughness an ambient temperature or chemical resistance,
More informationDSD 70 Dual Channel Hall Effect Speed Sensor for Railway Applications, compliant with EN 50155
DSD 70 Dual Channel Hall Effect Speed Sensor for Railway Applications, compliant with EN 50155 Technical information Version: 07.14 General Function The speed sensors family DSD.70 are suitable for generating
More informationMiniature High-Resolution Registration Mark Sensor White LED AUTOSET Remote Setup Option
REGISTRATION MARK SENSORS MARK EYE PRO 2 Miniature High-Resolution Registration Mark Sensor White LED AUTOSET Remote Setup Option Registration Mark Photoelectric Sensors 2-115 High-Resolution Registration
More informationAnalogue Input, 4-fold, MDRC AE/S 4.1, GH Q605 0054 R0001
Analogue Input, -fold, MDRC, GH Q605 005 R0001 The analogue input is a DIN rail mounted device for insertion in the distribution board. It is connected to the EIB via the bus connecting terminal supplied.
More informationcrm+130/iu/tc/e Extract from our online catalogue: Current to: 2016-04-21
Extract from our online catalogue: crm+130/iu/tc/e Current to: 2016-04-21 microsonic GmbH / Phoenixseestraße 7 / 44263 Dortmund / Germany / T +49 231 975151-0 / F +49 231 975151-51 / E info@microsonic.de
More informationContactless Encoder RI360P0-QR24M0-INCRX2-H1181
Compact, rugged housing Many mounting possibilities Status displayed via LED Immune to electromagnetic interference 1024 pulses per revolution (default) 360, 512, 1000, 1024, 2048, 2500, 3600, 4096, parametr.
More informationOrdering Information. Cylindrical Proximity Sensor E2E/E2E2
Cylindrical Sensor E2E/E2E2 A New Series of Easy-to-use and Tough E2E/E2E2 Models Long-size E2E2 Sensor Conforms to CENELEC Ideal for a variety of applications. With a metal connector that can be tightened
More informationsensors Miniature Sensors - S100 The universal miniature photoelectric sensor
Miniature Sensors - S1 The universal miniature photoelectric sensor Two threaded front mounting holes Two slotted rear mounting holes Anti-tampering sensor (no adjustment) Standard optic functions and
More informationContents. Document information
User Manual Contents Document information... 2 Introduction... 3 Warnings... 3 Manufacturer... 3 Description... Installation... Configuration... Troubleshooting...11 Technical data...12 Device Scope: PCB
More informationTurbine Flow Sensor Series VTR
Turbine Flow Sensor Series VTR SIKA Turbine Flow Sensor Series VTR Extra robust, impressively precise SIKA s VTR turbine flow sensor allows you to determine precisely, dependably and easily the flow rates
More informationT-SERIES INDUSTRIAL INCLINOMETER ANALOG INTERFACE
T-SERIES INDUSTRIAL INCLINOMETER ANALOG INTERFACE T-Series industrial inclinometers are compact high performance sensors used to determine inclination in roll and pitch axes with excellent precision and
More informationFLOW CALCULATOR INSTRUCTION MANUAL MESURES BAMOPHOX 759 26-06-2007 759 M1 02 E MES FLOW CALCULATOR 759-02/1
BAMOPHOX 759 E - M FLOW CALCULATOR INSTRUCTION MANUAL MESURES 22, Rue de la Voie des Bans - Z.I. de la Gare - 95100 ARGENTEUIL Tél : (33) 01 30 25 83 20 - Web : www.bamo.fr Fax : (33) 01 34 10 16 05 -
More informationOPERATING PRINCIPLES FOR PHOTOELECTRIC SENSORS
OPERATING PRINCIPLES FOR PHOTOELECTRIC SENSORS Photoelectric These sensors use light sensitive elements to detect objects and are made up of an emitter (light source) and a receiver. Four types of photoelectric
More informationConductive Level Switch FK 2 Technical Data:
Level switch for conductive liquids Optional electrode length adjustment Hygienic installation in accordance with EHEDG Wetted parts compatible with FDA requirements Potted electronic Not influenced by
More informationDCP Fan Controller. Version 01/2009. The engineer s choice
Version 01/2009 The engineer s choice Index Page 1. Introduction... 3 2. Technical specification... 4 3. Connection diagrams... 9 4. Configuration... 10 5. Compatible ebm-papst Fan List... 11 2 1. Introduction
More informationwww.sebury.com.cn Digital Keypad Use s Manual
K3 K4 www.sebury.com.cn Digital Keypad Use s Manual Contents Introduction Introduction Specifications Intramural Interface Circuit 3 Mounting 3 Wiring 5 Power UP 7 Engineer Programming Mode 7 The K3/K4
More information2/8.10.01. These vacuum switches are used in measuring ranges between -1 and 0 bar.
CATALOGUE > Release 8.5 > Electronic vacuum switches Series SWM Electronic miniature vacuum switches Series SWM These vacuum switches are used in measuring ranges between -1 and 0 bar. Small dimension
More informationLED red (-): Measuring value < lower tolerance threshold LED red (+): Measuring value > upper tolerance threshold. Page 1/6
L-LAS Series L-LAS-LT-165-CL - Line laser 1 mw, laser class 2 - Visible laser line (red light 670 nm), typ. 2 mm x 3 mm - Reference distance approx. 165 mm - Measuring range typ. 65... 265 mm - Resolution
More informationphotoelectric highlights www.automation.datalogic.com
photoelectric miniature sensors S8 series The new S8 series of compact sensors offers excellent detection performances, usually associated with sensors that have larger dimensions and a higher price. The
More informationInductive sensors. Compact, fast, reliable. Edition 2013
Inductive sensors. Compact, fast, reliable. Edition 2013 Indispensable in all machines Non-contacting, inductive proximity sensors play a major role in automation technology all over the world. For several
More informationBM SERIES WAVE COMPACT 6.3 GHZ CW SERIES PULSE RADAR LEVEL INSTRUMENTS (6.3 GHz)
CW SERIES PULSE RADAR LEVEL INSTRUMENTS (6.3 GHz) DESCRIPTION The Radar Level Meters of BM COMPACT WAVE 6.3 GHz series are excellent devices for no contact level measurement. The microwave impulses, emitted
More informationALARM ANNUNCIATOR ME - 3010 INSTRUCTION MANUAL
ALARM ANNUNCIATOR ME - 3010 INSTRUCTION MANUAL INTRODUCTION... 2.. TECHNICAL DATA... 3 ACCESSORIES... 5. INSTALLATION... 7 OPERATION... 12. TECHNICAL INFORMATION... 13 MAINTENANCE... 14. CONFIGURATIONS...
More informationL-LAS-TB-CL serie. laser light curtains for inline measuring tasks
L-LAS-TB-CL serie laser light curtains for inline measuring tasks Maximum distance 2.000 mm Measurement range 6 up to 98 mm Resolution up to 4 µm up to 1,5 khz scan rate 0-10 V or 4-20 ma analogue output
More informationCable Plug acc. to DIN EN 175301-803, Form A
Cable Plug acc. to DIN EN 175301-803, Form A Complete program Contact form 18 mm Also available with LED indicator Optional 4-pin version for pressure switch or impulse valves respectively Versions with
More informationDALI DIM/CONVERTER CONTROL (DC NV) 1 10V (0-10 V) analog DALI Converter with (Multi-) Sensor-control and 1 and 2-Switch dim functions
DAI DIM/COVERTER COTRO (DC V) 1 10V (0-10 V) analog DAI Converter with (Multi-) Sensor-control and 1 and 2-Switch dim functions Dim-and Switch Functions: The DAI Dim/Converter Control DC V is suitable
More informationSmart Sensing Solutions Since 1954
Smart Sensing Solutions Since 1954 X-tremely High Speed Photoelectric Registration Sensor 800-237-0946 ttco.com 813-886-4000 Photoelectric Registration Sensor The SMARTEYE X-MARK TM is the fastest, most
More informationDimensional drawing. Connection type IME08-1B5NOZT0S IME08-1B5NSZT0S IME08-1B5POZT0S IME08-1B5PSZT0S. 3 x 0.14 mm². brn. L+ Schließer/ Öffner M.
Inductive sensor, IE series, IE08, DC-wire, Standard series, Flush Inductive sensor Sensing range.5 mm Short-circuit protection (pulsed) Dimensional drawing 8x Robust brass housing, nickelplated with fine
More information4 Posiflow Proportional Solenoid Valves
4 Posiflow Solenoid Brass or Stainless Steel Bodies 1/4" to 1/2" NPT 2/2 Features Flow rates adjustable between 0% and 100% of rating Flow rate can also be regulated by a range of electrical inputs (sensors,
More informationOEM Pressure Transmitters for heavy-duty applications, Type MBS 1200 and MBS 1250
MAKING MODERN LIVING POSSIBLE Data sheet OEM Pressure Transmitters for heavy-duty applications, Type MBS 1200 and MBS 1250 The compact OEM pressure transmitter programme is designed for use in severe hydraulic
More informationATL Fuel Level Sender Probes
T E C H N I C A L S P E C I F I C A T I O N The ATL EL-AD-151 (Resistance Output) and EL-AD-152 (Voltage Output) Fuel Level Senders are highly advanced sensors for continuously measuring the contents of
More informationPreset Counter signo 721
Most simple handling Impressive, clearly readable display in 48x48 mm Input frequency up to 60 khz Easy installation due to pluggable terminals TECHNICAL DATA GENERAL Display Height of digits Supply voltage
More informationTilt switches N3 / N4... MEMS technology, one or two axis. Use. Options. + long lifetime and highly reliability due to mechanism-free MEMS technology
Tilt switches MEMS technology, one or two axis N3 / N4... + long lifetime and highly reliability due to mechanism-free MEMS technology + combinable output signals + one or two axis measurement + tilt range
More informationintelligent solutions
Lichtschranken W 8- Photoelectric Baureihe switches WL - Photoelectric proximity switches, BGS Photoelectric reflex switches Through-beam photoelectric switches W 8-: Integrated stateof-the-art technology
More informationElectric Rotary Actuator - On/Off or programmable control actuator
Electric Rotary Actuator - On/Off or programmable control actuator Direct mounting on quarter-turn valves Manual override standard Corrosion resistant Adjustable limit switches Multi-voltage version Type
More informationE2EL Ø 6,5 M8 / Plug M8 M8 / Plug M12 E2EL
High Frequency Inductive Proximity Sensor Increased response frequency for high speed applications Max 5 khz, switching frequency M8 or dia 6.5 mm housing Brass or stainless steel housing Ordering Information
More information713 Open Channel Flowmeter and Transmitter. All-in-one package for open channel flow measurement.
and Transmitter All-in-one package for open channel flow measurement. 3.1 NEW Class 1, Division 1 Approved Sensor As our products are continuously improved, we reserve the right to make any change in the
More informationCapacitive sensors. Versatile, contactless, durable Edition 2012/2013
Capacitive sensors Versatile, contactless, durable Edition 2012/2013 With capacitive sensors from Baumer you can complete almost any task. Visibly better: Baumer sensors. The Baumer Group is an internationally
More informationAutomation System TROVIS 6400 TROVIS 6493 Compact Controller
Automation System TROVIS 6400 TROVIS 6493 Compact Controller For panel mounting (front frame 48 x 96 mm/1.89 x 3.78 inch) Application Digital controller to automate industrial and process plants for general
More informationW150: Miniature photoelectric switch series with completely integrated electronics
Product group W50 Photoelectric proximity switch BGS Photoelectric proximity switch energ. Photoelectric reflex switch W50: iniature photoelectric switch series with completely integrated electronics Through-beam
More informationTable of Contents, Magnetic Field Sensors. Introduction to Magnetic Field Sensors... 380
Proximity Switches Table of Contents, Magnetic Field Sensors Proximity Sensors.3 Magnetic Field Sensors.2.3 Introduction to Magnetic Field Sensors... 380 Operating Distance and Responsiveness Mounting
More informationElectronic timer CT-AHD.12 OFF-delayed with 1 c/o (SPDT) contact
Data sheet Electronic timer CT-AHD.12 OFF-delayed with 1 c/o (SPDT) contact The CT-AHD.12 is an electronic time relay with OFF-delay. It is from the CT-D range. With their MDRC profile and a width of only
More informationVert-X 16-5V / 10...90% Ub. Applications Servodrives Dancer arm Operating table
Version MH-C MH-C2 Electrical data Measuring range 0... 360 - Indep. linearity % meas. range ±0.3 - Max. hysteresis 0.1 - Resolution bit 12 - Max. repeatability 0.1 - Sample rate fast mode khz (5) - Sample
More informationWEA-Base. User manual for load cell transmitters. UK WEA-Base User manual for load cell transmitters Version 3.2 UK
WEA-Base User manual for load cell transmitters 1 Contents 1. Technical data... 3 2. Assembly... 4 2.1 Power supply... 4 2.2 Load cells... 4 2.3 RS-485... 4 2.4 Relays... 5 2.5 Digital input... 5 2.6 Analogue
More informationElectronic Pressure Switch EDS 300
Electronic Pressure Switch EDS 300 User manual Page 2 of 16 Content 1. Functions of the EDS 300...3 2. Mounting...3 3. Operating keys on the membrane keypad...4 4. Digital display...4 5. Output function...5
More informationThroughbeam photoelectric sensors. Dimensioned drawing. Electrical connection
Specifications and description Leuze electronic LS 78 Throughbeam photoelectric sensors Dimensioned drawing 180m 10-30 V DC! Voltage range from 12 30VDC with NPN, PNP and/or relay outputs! Light/dark switching!
More informationModular I/O System Analog and Digital Interface Modules
OPERATING INSTRUCTIONS Modular I/O System Analog and Digital Interface Modules Installation Operation Maintenance Document Information Document ID Title: Operating Instructions Modular I/O System Part
More informationVSO MAX HP High Flow Proportional Valve
VSO MAX HP High Flow Proportional Valve Typical Applications Ventilators Insufflators Anesthesia Delivery & Monitors Pressure & Flow Control Mass Flow Control Product Specifications Physical Properties
More informationDisplacement encoders
Displacement encoders Analogue and digital For measuring and positioning For use with pneumatic components 1 Displacement encoders Key features Analogue displacement encoders MLO-POT- -TLF Conductive plastic
More information0.8 U N /0.5 U N 0.8 U N /0.5 U N 0.8 U N /0.5 U N 0.2 U N /0.1 U N 0.2 U N /0.1 U N 0.2 U N /0.1 U N
55 Series - General purpose relays 7-10 A Features 55.12 55.13 55.14 Printed circuit mount, general purpose 2, 3 & 4 Pole relays 55.12-2 Pole 10 A 55.13-3 Pole 10 A 55.14-4 Pole 7 A AC coils & DC coils
More informationMirror Mount Video Monitor/Recorder with Front and Rear View Night Cameras PLCMDVR5
Mirror Mount Video Monitor/Recorder with Front and Rear View Night Cameras PLCMDVR5 www.pyleaudio.com Instruction Manual Installation and Connection: 1. Please disconnect your car battery. 2. In the contents
More informationinstabus KNX / EIB System System E F G H
Product name: Uninterruptible power supply (USV) 640 ma Design: REG (rail-mounted device) Article-no.: 1079 00 ETS search path: Gira Giersiepen / system components / power supply / power supply 640mA DRA
More informationDifferential Pressure Sensors for air and non-corrosive gases, with calibration certificate
1 919 1919P01 1919P03 QBM65/C, QBM75-1U/C Differential Pressure Sensors for air and non-corrosive gases, with calibration certificate QBM751-1/C QBM65/C QBM75/C Highly accurate measurements with calibration
More informationTechnical Data. General specifications Switching element function PNP NO/NC Rated operating distance s n 8 mm
Model Number Features Increased operating distance 8 mm flush ATEX-approval for zone and zone Accessories BF 8 Mounting flange, 8 mm EXG-8 Quick mounting bracket with dead stop Technical Data specifications
More informationTechnical Data. Dimensions
0102 Model Number Features 15 mm quasi flush Usable up to SIL2 acc. to IEC 61508 Accessories BF 30 Mounting flange, 30 mm V1-G-N-2M-PUR Female cordset, M12, 2-pin, NAMUR, PUR cable V1-W-N-2M-PUR Female
More informationSelector Switch Type 01
Selector Switch Type 0 Compact positions selector switch,000 switching cycles with up to.0 Ncm switching torque Gold plated contacts: micron Robust metal housing with metal shaft Optional IP front panel
More informationZlinx Wireless I/O. Peer-to-Peer and Modbus I/O B&B ELECTRONICS PRODUCT INFORMATION
Modular, Customizable Wire Replacement 128 / 256 Bit AES Encryption Software Selectable RF Transmit Power Software Selectable Over-the-air Data Rate Modbus ASCII /RTU Compatible Wide Operating Temperature
More informationOnline data sheet PET-1CB010N10SVMC PET PRESSURE SENSORS
Online data sheet PET-1CB010N10SVMC PET B C D E F H I J K L M N O P Q R S T Illustration may differ Detailed technical data Features Pressure type Measuring range Ordering information Other models and
More informationMini USB and USB 2.0-IP67 Connector System
Mini USB and USB 2.0-IP67 Connector System Section 12 Mini USB and USB 2.0-IP67 Connector System CONEC has added the Mini-USB connector. This Mini-USB IP67 receptacle and plug family, feature a bayonet
More informationTC-9102 Series Surface Mount Temperature Controllers
TC-9102 Series Surface Mount Temperature Controllers General Description & Applications The TC-9102 Series Temperature Controller offers a versatile solution for a wide variety of applications that may
More informationDMP 331. Industrial Pressure Transmitter for Low Pressure. Stainless Steel Sensor
DMP Industrial Pressure Transmitter for Low Pressure Stainless Steel Sensor accuracy according to IEC 60770: standard: 0.5 % FSO option: 0.5 / 0. % FSO from 0... 00 mbar up to 0... 40 bar Output signals
More informationInductive Sensors Single or Dual Loop Detectors Type LD with teach-in
Inductive Sensors Single or Dual Loop Detectors Type LD with teach-in Single or Dual loop detector Automatically adjustment of detection level Manual sensitivity for compensations of variations Easy installation
More informationJNIOR. Overview. Get Connected. Get Results. JNIOR Model 310. JNIOR Model 312. JNIOR Model 314. JNIOR Model 410
The INTEG is an Ethernet I/O (digital, analog) device that monitors and controls a small set of process signals. functions as both basic I/O for integration with another application or system AND as a
More informationCapacitive Prox E2K-X
Capacitive Prox Threaded, Cylindrical Sensor Detects Metallic and Non-metallic Objects Permits non-contact detection of metallic and non-metallic objects such as glass, wood, water, oil and plastic Allows
More informationFerrostat Speed Sensor Series DSF Explosion Proof Versions EEx
Ferrostat Speed Sensor Series DSF Explosion Proof Versions EEx DSF..10.**.HV Ex ATEX Operating Instructions 374E-64368 Valid from lot nr. 0103 General Function Use in potentially explosive environment
More informationMagnetic Proximity Switches Series CST - CSV and CSH
Magnetic Series CST - CSV and CSH Reed, Electronic»» Designed to fit into the cylinder profile barrel»» 3 models (CST - CSV - CSH) are suitable for all Camozzi s cylinder range»» With or without M8 connector
More informationInstallation and Operating Instructions for ROBA -takt Control Unit Type 014.000.2
Manufacturer s Declaration This product is intended f installation in a machine system, based on the machine directive 006/4/EC. It is fbidden to start use of the product until the machine system into
More informationABSOLUTE ROTARY ENCODER ETHERNET/IP
Main Features - Compact and heavy duty industrial model - Interface: EtherNet/IP - Conformance tested by ODVA - Housing: 58 mm - Full shaft: 6 or 10 mm / hollow shaft15 mm - Resolution: max. 30 Bit = 1,073,741,824
More informationMonitor and control the sensors through network. supported OPTEX FA CO., LTD. Remote controlling of fiber sensors. Reduces wires and saves space
CC-Link Communication Unit * FASTUS is a product brand of Optex FA. Monitor and control the sensors through network supported Remote controlling of fiber sensors Reduces wires and saves space OPTEX FA
More informationAppearance Type Setting distance Sensing area Model Remarks Camera with lighting. 34mm to 49mm 5mm x 4.9mm to 9mm x 8.
ZFX-C/25-CD Easy Vision Touch, Connect & Go Easy vision intuitive teach & go user interfaces Live built-in LCD touch monitors for setup and iediate feedback Counication centralized setup & inspection via
More informationIndustrial Bar Code Scanners
DS4800 Industrial Bar Code Scanners Enhanced Connectivity Ease of use Configuration SW Tool ACR4 technology Smart focus adjustment APPLICATIONS Automated warehousing Reading on pallets Picking systems
More informationAppearance Type Setting distance Sensing area Model Remarks Camera with lighting. 34mm to 49mm 5mm x 4.9mm to 9mm x 8.
ZFX-C10/15-CD Easy Vision Touch, Connect & Go Easy vision intuitive teach & go user interfaces Live built-in LCD touch monitors for setup and iediate feedback Counication centralized setup & inspection
More informationAssisted lift operated 2/2-way solenoid valves Type EV250B
MAKING MODERN LIVING POSSIBLE Data sheet Assisted lift operated 2/2-way solenoid valves Type EV250B EV250B with assisted lift can operate from zero and up to 10 bar differential pressure. This 2/2-way
More informationElectrical connection
(I)GSU 14B Ultrasonic Label Fork Dimensioned drawing Part No. 501 09234 4mm 12-30 V DC 4 m/s Ultrasonic forked sensor for universal application Large mouth width, hence also suitable for booklets or fan-fold
More informationOperating instructions Switching amplifier for fibre optics. OBF5xx 704876 / 00 08 / 2010
Operating instructions Switching amplifier for fibre optics OBF5xx 70876 / 00 08 / 00 Contents Preliminary note. Symbols used Functions and features. Applications Installation. Attaching the fibre optics
More informationis then retained absolutely without interruption.
Page 1 of 11 DC UPS uninterruptible power supplies - DC UPS module 15 A Compact design, only 50 mm wide Absolutely interruption-free buffering of power failures through immediate electronic connection
More informationInwall 4 Input / 4 Output Module
Inwall 4 Input / 4 Output Module IO44C02KNX Product Handbook Product: Inwall 4 Input / 4 Output Module Order Code: IO44C02KNX 1/27 INDEX 1. General Introduction... 3 2. Technical data... 3 2.1 Wiring Diagram...
More informationInductive sensor NI10-M18-Y1X-H1141
ATEX category II 1 G, Ex zone 0 ATEX category II 1 D, Ex zone 20 SIL2 as per IEC 61508 Threaded barrel, M18 x 1 Chrome-plated brass DC 2-wire, nom. 8.2 VDC Output acc. to DIN EN 60947-5-6 (NA- MUR) M12
More informationMULTI-BEAM LS10 Light Screen System
For Sensing Small Parts at High Speeds Emitter and receiver pair produce a strobed array of modulated light beams to produce a light screen Simple, economical and highly reliable means of sensing small
More informationSeries 7500 Torque Sensor
Properties PTO (Power Take-Off) shaft with integrated torque and angle measurement Non-contact measurement system, high robustness Plug & Play solution, no additional electronics required Performance Measurement
More information