MICRO OMF / Oral Maxillo Facial MICRO 1200

Transcription

1 MICRO 200 MICRO 200 The MICRO 200 Titanium Implant System has been developed to meet all requirements in craniofacial osteosynthesis of the upper third of the skull. Areas of Application: Naso-orbital Area Infra-orbital Area Exterior wall of the maxillary sinus Cranial Area Frontal sinus Fixation of bone transplants OMF / Oral Maxillo Facial

2 MICRO 200 Table of contents Screws Page 3 MICRO 200 Plates Page 4 CAD-Plates, MICRO-MESH Page 5 Screwdrivers Page 6 Blades, Drills Page 7 Instruments Page 8 Container Page 9 Ordering information Page 0 Color code: blue Page 2

3 Self-tapping Screws (Packaging: 0/ea.) LOCK-DRIVE Screw Art. No. Diameter x Length x 2 mm x 3 mm x 4 mm x 5 mm x 6 mm x 7 mm x 8 mm x mm x 3 mm x 5 mm CROSS-FIT Screw Art. No. Diameter x Length x 2 mm x 3 mm x 4 mm x 5 mm x 6 mm x 7 mm x 8 mm x mm x 3 mm x 5 mm LOCK-DRIVE Emergency Screw Art. No. Diameter x Length x 4 mm x 6 mm x 8 mm x 9 mm x mm x 3 mm x 5 mm CROSS-FIT Emergency Screw Art. No. Diameter x Length x 4 mm x 6 mm x mm x 3 mm x 5 mm Page 3

4 MICRO 200 Plates (Packaging: /ea.) Thickness: 0.6 mm 6-hole Art. No. Description hole Plate, straight hole Plate, bar 6 mm hole Plate, bar 9 mm hole Plate, straight hole Plate, bar 7.5 mm hole Plate, straight hole Plate, straight hole Orbital Plate hole Orbital Plate hole L-Plate right hole L-Plate left hole L-Plate, bar 7.5 mm, right hole L-Plate, bar 7.5 mm, left hole L-Plate, right hole L-Plate, left Art. No. Description hole L-Plate, bar 2 mm, right hole L-Plate, bar 2 mm, left hole T-Plate hole T-Plate, bar 9 mm hole T-Plate, bar 7.5 mm hole H-Plate, small hole H-Plate, large hole Y-Plate hole Y-Plate, bar 8 mm hole Y-Plate, bar 2 mm hole X-Plate, small hole X-Plate, large Page 4

5 CAD-Plates (Packaging: /ea.) Thickness: 0.6 mm Art. No. Description hole CAD-Plate, triangular hole CAD-Plate, square hole CAD-Plate, square hole CAD-Plate, square hole CAD-Plate, rectangular hole CAD-Plate, rectangular hole CAD-Plate, rectangular Titanium MICRO-MESH (Packaging: /ea.) MICRO-MESH MICRO-MESH, Thickness: 0. mm MICRO-MESH, Thickness: 0.2 mm Art. No. Length x Width x Thickness x 30 x 0. mm x 60 x 0. mm x 30 x 0. mm x 60 x 0. mm x 20 x 0. mm Art. No. Length x Width x Thickness x 30 x 0.2 mm x 60 x 0.2 mm x 30 x 0.2 mm x 60 x 0.2 mm x 20 x 0.2 mm Page 5

6 Screwdrivers Screwdriver handle, 9 cm Screwdriver handle, short, 6 cm LOCK-DRIVE blade, self-retaining CROSS-FIT blade, self-retaining CROSS-FIT screwdriver with holding device CROSS-FIT holding device, not self-retaining LOCK-DRIVE, Screwdriver fixed, 3 cm, self-retaining CROSS-FIT, Screwdriver fixed, 3 cm, self-retaining Page 6

7 Blades for Angled Handpieces LOCK-DRIVE blade, short, 2 cm, DENTAL, self-retaining CROSS-FIT blade, short, 2 cm, DENTAL, self-retaining Drills Max..000 rpm Art. No. Diameter x Length Working Length (WL) End x 47 mm 5 mm Stryker x 50 mm 7 mm Stryker x 50 mm 8 mm Stryker x 54 mm 5 mm Stryker x 47 mm 5 mm Dental x 50 mm 8 mm Dental x 50 mm 5 mm Dental x 20 mm 5 mm Dental x 23 mm 8 mm Dental x 25 mm 0 mm Dental x 30 mm 5 mm Dental Page 7

8 Instruments Plate cutter, cm Flat nose pliers, 3.5 cm Aderer modular plate bending pliers, 2.5 cm Bending pliers with pin, 3 cm Plate holding fork/ball, double-ended, 8 cm Plate holding forceps curved, 8 cm Page 8

9 Container Instrument tray, empty Implant tray, empty Page 9

10 MICRO 200 BASIC Set (Recommendation) Ordering information Art. No. Quantity Description MICRO 200 Set LOCK-DRIVE complete consisting of: Sterilization and Storage Sterilizing container Container label blue MICRO 200 Instrument tray Implant tray Instruments Screwdriver handle, 9 cm LOCK-DRIVE blade LOCK-DRIVE screwdriver, fixed Aderer modular bending pliers Flat nose pliers Plate cutter Plate holding forceps Drills (Stryker shaft end) Drill.0 x 47 mm, WL 5 mm Drill.0 x 50 mm, WL 8 mm LOCK-DRIVE Screws LD Screw.2 x 3 mm, 0/ea. LD Screw.2 x 4 mm, 0/ea. LD Screw.2 x 5 mm, 0/ea. LD Screw.2 x 6 mm, 0/ea. LD Screw.2 x 7 mm, 0/ea. LD Emerg. Screw.5 x 4 mm, 0/ea. MICRO 200 bone plates 4-hole Plate, straight, /ea. 6-hole Plate, straight, /ea. 6-hole Plate, straight, /ea. 5-hole L-Plate, left, /ea. 5-hole L-Plate, right, /ea. 7-hole T-Plate, /ea. 9-hole H-Plate, small, /ea. 6-hole Y-Plate, /ea. 6-hole X-Plate, small, /ea. Art. No. Quantity Description MICRO 200 Set CROSS-FIT complete consisting of: Sterilization and Storage Sterilizing container Container label blue MICRO 200 Instrument tray Implant tray Instruments Screwdriver handle, 9 cm CROSS-FIT blade CROSS-FIT screwdriver, fixed Aderer modular bending pliers Flat nose pliers Plate cutter Plate holding forceps Drills (Stryker shaft end) Drill.0 x 47 mm, WL 5 mm Drill.0 x 50 mm, WL 8 mm CROSS-FIT Screws CF Screw.2 x 3 mm, 0/ea. CF Screw.2 x 4 mm, 0/ea. CF Screw.2 x 5 mm, 0/ea. CF Screw.2 x 6 mm, 0/ea. CF Screw.2 x 7 mm, 0/ea. CF Emerg. Screw.5 x 4 mm, 0/ea. MICRO 200 bone plates 4-hole Plate, straight, /ea. 6-hole Plate, straight, /ea. 6-hole Plate, straight, /ea. 5-hole L-Plate, left, /ea. 5-hole L-Plate, right, /ea. 7-hole T-Plate, /ea. 9-hole H-Plate, small, /ea. 6-hole Y-Plate, /ea. 6-hole X-Plate, small, /ea LOCK-DRIVE Instruments without implants CROSS-FIT Instruments without implants Page 0

11 Notes Page

12 High Quality Implants Made by MONDEAL We reserve the right to make catalog and design changes arising from further developments and modifications. Pictures, product descriptions and texts are the property of MONDEAL Medical Systems GmbH. Further use and reproduction by Third Parties requires written consent from MONDEAL Medical Systems GmbH. All rights reserved! Note: Responsibility for the selection of the patient, for adequate training as well as the decision as to the choice and use of the implants, a post-operative removal or retention of implants is the sole decision of the surgeon. All brands and logos referred to in this brochure, registered by Third Parties, are subject without restriction to the legal provisions currently in force and to the rights of ownership of the respective registered owner MONDEAL Medical Systems GmbH Am Gewerbering Mühlheim a. d. Donau/Germany Phone Fax mail@mondeal.de 97-D0-E MICRO 200 0/ 04-