Sold and Supported by Pat Mooney Saws. Aluminum and Non-Ferrous Circular Saws
|
|
- Hilary Parrish
- 7 years ago
- Views:
Transcription
1 Sold and Supported by Pat Mooney Saws Aluminum and Non-Ferrous Circular Saws
2 PMI UPCUT ALUMINUM SAWS Straight Cutoff Upcut Models The PMI High Speed Upcut Aluminum Saws are designed to cut aluminum profiles quickly and accurately. The PMI saws will leave a burr free, mirror image finish on cut parts. The upcut design, enclosed saw blade chamber, and powerful saw motors ensure a productive and safe work environment. PMI-18 FEATURES 7.5 HP saw motor Pneumatic clamping system with adjustable clamping pressure to prevent distortion Saw blade feed controlled via air / hydraulic PMI-24 FEATURES 7.5 HP saw motor Hydraulic clamping system with adjustable clamping pressure to prevent distortion Saw blade feed controlled via air / hydraulic PMI-30 FEATURES 20 HP saw motor Hydraulic clamping system with adjustable clamping pressure to prevent distortion Saw blade feed fully hydraulic Semi-Automatic Straight Cutoff Upcut & Horizontal Saw Specifications Model Round Max. Width Blade Dimensions Saw Motor Power Blade Speed Machine Weight PMI " 12" 18" 7.5 HP 3500 rpm 770 lbs PMI " " 24" 7.5 HP 2000 rpm 1210 lbs PMI " " 30" 20 HP 1800 rpm 1496 lbs PMI-30L " " 30" 20 HP 1500 rpm 3960 lbs
3 PMI MITER UPCUT SAWS Mitering Upcut Models The PMI High Speed Upcut Aluminum Saws are designed to cut aluminum profiles quickly and accurately. The PMI saws will leave a burr free, mirror image finish on cut parts. The upcut design, enclosed saw blade chamber, and powerful saw motors ensure a productive and safe work environment. PMI-20 FEATURES 7.5 HP saw motor Pneumatic clamping system with adjustable clamping pressure to prevent distortion Saw blade feed controlled via air / hydraulic Miter capability PMI-20 Upcut Saw with Automated Stop/Gauge and Pusher Systems - Fast and Accurate Every Time. PMI FEATURES 7.5 HP saw motor Pneumatic clamping system with adjustable clamping pressure to prevent distortion Saw blade feed controlled via air / hydraulic PMI FEATURES 10 HP saw motor Pneumatic clamping system with adjustable clamping pressure to prevent distortion Saw blade feed fully hydraulic Model Round Semi-Automatic Mitering Upcut Saw Specifications Max. Width Blade Dimensions Saw Motor Power Blade Speed Machine Weight PMI " 8.66" 16" 3 HP 3600 rpm 900 lbs PMI " " 20" 7.5 HP 3000 rpm 1275 lbs PMI " " 24" 7.5 HP 2000 rpm 2028 lbs PMI " " 30" 10 HP 1500 rpm 2680 lbs PMI " " 36" 10 HP 1200 rpm 3960 lbs
4 PMI AUTOMATIC MITER SAWS Fully Automatic Saws with automatic saw head rotation and automatic material indexing. Features include touch screen control for easy job setup, servo motor driven pusher system (available in working lengths from 8 Ft to 21-1/2 Ft) and saw head rotation, fully automatic saw cycle and 100 program storage. PMI Automatic Miter Upcut Saws Specifications PMI Auto Miter 20 Type Type Type Auto Miter Rotation ± 45 degrees ± 60 degrees ± 60 degrees 5.905" Round, 5.905" Square 7.873" Round, 7.873" Square 9.448" Round " Square ½" x 13-1/4" Rectangle ½" x 15-3/4" Rectangle ½" x 17-1/4" Rectangle 20" x 1" Bore 24" x 1" Bore 30" x 1" Bore Saw Blade Speed 3000 RPM 2000 RPM 1500 RPM Saw Motor 7.5 HP 7.5 HP 10 HP Servo Motor Pusher 400 w (750 w Optional) 400 w (750 w Optional) 400 w (750 w Optional) Servo Motor Rotation 400 w 400 w 400 w Pusher Feed Speed 66 to 110 FPM 66 to 110 FPM 66 to 110 FPM Pusher System Length 8 Ft to 21-1/2 Ft 8 Ft to 21-1/2 Ft 8 Ft to 21-1/2 Ft PMI AUTOMATIC ALUMINUM SAWS PMI-455 Fully Automatic High Speed Circular Saws for Aluminum PMI-455 Fully Automatic Saws are designed for sawing aluminum extrusions and solids to a precise length. PMI-455 Series Saws are available in upcut and crosscut (horizontal) models. FEATURES Touchscreen control for easy job setup Simple set up to run stacked or bundle lengths of material Ballscrew-controlled shuttle indexing vise and servo motor driven for precise cuts Incremental material indexing for faster cycle times Standard with horizontal and vertical clamps on the shuttle vise and fixed saw vise
5 PMI AUTOMATIC ALUMINUM SAWS L TYPE - HORIZONTAL SAW L Type Cutting Chart Powerful Crosscut Sawhead Design Sawhead Moves on Precision Linear Guideways Type LE - 15 HP Motor Allows for Sawing of Extrusions and Tubes Type LS - 20 HP Motor Enables Sawing of Solid Bars and Extruded Shapes H MAX. cutting and clamping width 15.75" MAX. cutting and clamping height 6.89" (optional MAX cutting height and clamping 7.87") clamping system (inch) clamping system (inch) Fence Position W A TYPE - UPCUT SAW H A Type Cutting Chart inch 6.30 clamping system Saw Travels through the Workpiece from under the Worktable Compact Saws a Variety of Feed Lengths 10 HP Motor Enables Quick and Precise Sawing of Aluminum Extruded Shapes or Smaller Bars w inch PMI Fully Automatic Aluminum Saws Specifications PMI-455 A-Type LE-Type LS-Type Saw Head Type Upcut CrossCut (horizontal) CrossCut (horizontal) See Chart See Chart See Chart Material Feed System Ball Screw with Servo Motor Ball Screw with Servo Motor Ball Screw with Servo Motor Stroke Length 20" 55" (optional 118") 55" (optional 118") Saw Blade Speed 3200 RPM 1500 to 3500 RPM 1500 to 3500 RPM Saw Motor 10 HP 15 HP 20 HP Hydraulic Motor 1 HP 1 HP 1 HP Chip Collector 3 HP 5 HP 5 HP Infeed Conveyor 13 Ft 11-1/2 Ft 11-1/2 Ft Saw Blade Size 18" x 1" bore 12" to 24" diameter (1" bore) 12" to 24" diameter (1" bore) Machine Weight 3,080 LBS 5,060 LBS 5,060 LBS Machine Dimensions 98.5" x 52" x 79.5" 138" x 83" x 74" 138" x 83" x 74"
6 NOTCHING SAWS - DOUBLE BLADE ANGULAR SAWS Double Blade 45 Degree Cutoff Saw PMI-14 A AND B TYPE FEATURES Equipped with two saw heads that are fixed at a 45 degree angle so in a single saw cycle two 45 degree cuts are produced Ideal saw for applications that require opposing 45 degree miter cuts The double saw blade design provides fast cut times to greatly increase efficiency Standard with vertical and horizontal clamps Standard equipment includes infeed and outfeed table with built in manual length stop Double Blade Notching Saw PMI-14 C TYPE FEATURES Ideal machine for notching applications The two saw heads feed vertically on precision ground shafts The saw blades are staggered and positioned at 45 degrees to reduce waste Large cutting capacity 8" maximum height Adjustable saw blade stroke for faster cycle times Standard with horizontal and vertical clamps Double Blade Notching Saw PMI-LJK500 FEATURES Equipped with two saw heads that move +/- 45 degrees which allows for various types of notch cuts The two saw heads can work simultaneously to achieve the processing of special angles at the end of the profile surface This machine was specifically designed with the aluminum curtain-wall and skylight processing industries in mind Equipped with digital read out to display the cutting angle and worktable height Model Cutting Angle PMI-14 A 45 PMI-14 B 45 PMI-14 C 45 PMI-LJK500 ±45 Cutting Capacity 4" x 4", 3-1/4" x 4-3/4", 2-3/8" x 7" 5-1/8" x 6", 4" x 7", 2-3/4" x 10" 5-1/8" x 5-1/8" (8" maximum height) 6" x 6" (7-3/4" x 6" optional) Double Blade Angular Saw Specifications Blade Dimensions Saw Motor Power Blade Speed Machine Weight ø14" x ø1" x 2 pcs 2 HP x rpm 682 LBS ø18" x ø1" x 2 pcs 2 HP x rpm 1100 LBS ø14" x ø1" x 2 pcs 2 HP x rpm 770 LBS 26" x 1" (vertical) 20" x 1" (horizontal) 3 HP x rpm 3300 LBS
7 DOUBLE HEAD MITER SAWS Automatic Double Head Miter Saw PMI-T3 FEATURES Each saw head miters degrees and +45 degrees Automatic length and angle positioning 3-axis M15 automatic control for the angle and length Movable saw head slides on linear guideways to ensure accurate movements Automatic Double Head Compound Miter Saw PMI-T5 FEATURES Each saw head is capable of rotating ±45 degrees automatically and tilting from ±45 degrees (compound miter) Automatic cut length positioning 5-axis servomotor control Easy-to-use touch screen control Moveable saw head slides on linear guideways to ensure accurate movements Automatic Double Saw Machine (45 degrees) PMI-T3L FEATURES Double head saw designed for cutting 45 degree miters Saw heads move through the material horizontally (cross cut) to allow for cutting large sections of material Saw heads move on linear guideways Automatic cut length positioning Moveable saw head slides on linear guideways to ensure accurate movements Double Head Miter Saw Specifications Model Control Mode of Angle and Length Cutting Capacity Blade Dimensions Saw Motor Power Blade Speed Machine Weight 22.5 Min Cutting Length 17-3/4", Cutting Size 4" x 4" PMI-T3 PMI-T5 PMI-T3L M15 Automatic Servomotor M15 Automatic 45 Min Cutting Length 17-3/4", Cutting Size 5-1/2" x 5-1/2" 90 Min Cutting Length 17-3/4", Cutting Size 6" x 6" 135 Min Cutting Length 21-1/2", Cutting Size 5-1/2" x 5-1/2" Max cutting length 177" (optional 256") 90 Cuts 5-1/2" x 5-1/2" 45 degree cuts 4" x 8" Max Cut Length 157" (optional 236") Min cut length 17-3/4" at 90 degrees Min cut length 31-1/2" when cutting at 135 degrees Min Cutting Length 20", Cutting Size 3-1/2" x 8" Max Cutting Length 138" (other sizes available) ø20" x ø1" x 120T 3 HP x rpm 3960 LBS ø20" x ø1" x 120T 5 HP x rpm 4840 LBS ø405" x ø25.4" x 120T 3 HP x rpm 3960 LBS
8 SERVICE AND SUPPORT Pat Mooney is the exclusive importer and sales/service agent for PMI Saws. Expertly trained, our service specialists have the knowledge necessary to quickly respond to your PMI service and support needs. Trained, Qualified Service Personnel A Large Inventory of Replacement Parts and Blades New Blades for Special Applications PMI NON-FERROUS SAW INSTALLATIONS PMI-455 LS-Type Fully Automatic Aluminum Saw PMI-20 Upcut Saw with Tiger Stop System PMI-455 LS-Type Fully Automatic Aluminum Saw PMI-18 Upcut Saw with 16 Foot Tiger Stop Automatic Pusher System 502 S. Westgate Street, Addison, IL Phone: Fax: Toll-Free: sales@patmooneysaws.com
DUGARD. Machine Tools Since 1939. Dugard 700L Series Heavy Duty CNC Lathes. www.dugard.com
DUGARD Machine Tools Since 1939 Dugard 700L Series Heavy Duty CNC Lathes www.dugard.com Dugard 700L Heavy Duty CNC Lathe 2000, 3000 or 4000mm bed length Designed for easy and convenient operation The concave
More informationMilling and Machining Center Basics
Training Objectives After watching the video and reviewing this printed material, the viewer will gain knowledge and understanding of basic milling theories and procedures. In addition, the viewer will
More informationPipe Cutting and Beveling Clamshells
Pipe Cutting and Beveling Clamshells Who We Are One Company, Total Support, Complete Solutions For more than a century, Hydratight has provided world-class bolted joint solutions and continues to set international
More informationHOBBING MACHINE TYPE ZFWZ 8000x40
Inventory number 416/635 Year of production 1973 Serial number 7160 HOBBING MACHINE TYPE ZFWZ 8000x40 Application The machine is provided for milling cylindrical, helical and helix cogwheels. The tooth
More informationThe Production Metal Circular Sawing Machines of the PSU 450 Series PSU 450
The Production Metal Circular Sawing Machines of the PSU 450 Series PSU 450 The PSU 450 G High-performance Circular Sawing Machine Excellent handling features, high safety standards and the extraordinary
More informationPBZ Heavy. PBZ Heavy. CNC Gantry-Type Machining Center. Power - Performance - Precision. www.knuth-usa.com
CNC Gantry-Type Machining Center Power - Performance - Precision Travel X-axis up to 244 in Y-axis up to 126 in Z-axis up to 39 in Strong Machine bed, dual columns and fixed bridge ensure a rigid frame
More informationaccord 20 fx CNC machining centre
accord 20 fx CNC machining centre accord 20 fx CNC machining centre New-generation modular machining centre designed for machining operations involving heavy duty stock removal with high precision and
More informationNewland Machine Tool Group Inc.
Newland Machine Tool Group Inc. HEAVY MACHINE TOOLS OVERVIEW Horizontal Boring Mills KB Series T-type HBM with 130 or 165 mm extendable spindle (W-axis), column movable in the spindle direction (Z-axis),
More informationNAGEL ECO 180 FLEXIBLE HONING SYSTEM
NAGEL ECO 180 FLEXIBLE HONING SYSTEM NEW DEVELOPMENT For Small and Medium Production Runs In-process gauging, Roughing and finishing in a single spindle Tel: 734-426-1812 www.nagelusa.com MACHINE HIGHLIGHTS
More informationDUGARD. Machine Tools Since 1939. Dugard ECO Series Driven Tool, Slant Bed CNC Lathes. www.dugard.com
DUGARD Machine Tools Since 1939 ECO Series Driven Tool, Slant Bed CNC Lathes www.dugard.com ECO Series - CNC Lathes Amazing speed, power, precision and durability all at an affordable price Rigid and Trustworthy
More informationProviding Answers For All Your Machine Tool Needs
Providing Answers For All Your Machine Tool Needs STANDARD FEATURES FANUC MXP-200FA CONTROL Spindle Features Body Structure POWERFUL 20 HP H / L SHIFTING SPINDLE MOTOR HARDENED & GROUND BOXWAY CONSTRUCTION
More informationThat s E[M]CONOMY: Not just training: Real Action! CONCEPT TURN 250. Training reality with industrial performance
[ That s ] E[M]CONOMY: Not just training: Real Action! CONCEPT TURN 250 Training reality with industrial performance Concept TURN 250 Uncompromising quality right down to the last bolt, at an unbeatable
More informationMilling & Machining Centers
Training Objective After watching the program and reviewing this printed material, the viewer will gain knowledge and understanding of basic milling theories and procedures. In addition, the viewer will
More informationKey data. The practical machines for your specific grinding solution. A member of the United Grinding Group. The Art of Grinding.
The Art of Grinding. A member of the United Grinding Group CT450 / CT550 The practical machines for your specific grinding solution. Key data The CT450 / CT550 are very flexible internal cylindrical grinding
More informationFlash Butt Welding Machines
Flash Butt Welding Machines Types AS 15 - AS 320 Flash butt welding current brake current (ka) current time flattening reversal preheating welding time flash butting forging A reliable and economic process
More information[ means: Save time, money and space! MAXXMILL 500. Vertical milling center for 5-side machining
[ E[M]CONOMY] means: Save time, money and space! MAXXMILL 500 Vertical milling center for 5-side machining MAXXMILL 500 MAXXMILL 500 is the ideal vertical milling center for the for the 5-axis operation
More informationTL-Series Sub-Spindle Operator s Addendum
3 4 5 11 9 TL-Series Sub-Spindle Operator s Addendum 2 1 12 10 6 7 8 20HP VECTOR DUAL DRIVE LIVE TOOLING SUB SPINDLE 2008 Haas Automation, Inc. 96-0037 rev L 9/08 1 1. Introduction Specific M codes are
More informationMachine tools. Milling- and boring machines
Milling- and boring machines Milling- and boring machines Our family owned company develops and manufactures customized machines and designs machine tools based on work piece requirements successfully
More informationMultibend-Center RAS 79.22-2 / RAS 79.26-2
RAS Reinhardt Maschinenbau GmbH High-tech perfection! If you want to produce complex sheet metal parts regardless of batch size, with incredible throughput, total flexibility, amazing accuracy, and total
More informationHCW 1000 NEW TYPE OF LIGHT MACHINE FROM SKODA
HCW 1000 NEW TYPE OF LIGHT MACHINE FROM SKODA INTRODUCTION HCW 1000 ŠKODA MACHINE TOOL a.s. continues its more than 100 years old tradition of high-precision machine tool manufacturing. Based on market
More informationMachining Center Equipped with Unparalleled Rigidity and Agility NHX6300
Press Release Mori Seiki Co., Ltd. Head Office: 2-35-16 Meieki, Nakamura-ku, Nagoya City 450-0002, Japan TEL: +81(0)52-587-1830 FAX: +81(0)52-587-1833 January 24, 2013 Machining Center Equipped with Unparalleled
More informationSheet Metal Shearing & Bending
Training Objective After watching the program and reviewing this printed material, the viewer will gain a knowledge and understanding of the principles and machine methods of shearing and bending sheetmetal
More informationPrecise heavy-duty cutting
PR 130 / PR 150 / PR 160 / PR 180 / PR 200 / PR 260 Precise heavy-duty cutting P-SERIES K-SERIES T-SERIES MILLFORCE 02 / Fields of application 03 / Machine concept 04 / Machine technology 05 / Options
More informationOverview. Milling Machine Fundamentals. Safety. Shop Etiquette. Vehicle Projects Machine Shop
Overview Milling Machine Fundamentals Wayne Staats, UW-Madison FSAE Safety Shop Etiquette Before Machining Indicating Calculating Feeds and Speeds Machining Maintenance Safety Respect the machines Common
More informationABOVE AND BEYOND HONING. SV-2500 series PRECISION VERTICAL HONING SYSTEM
ABOVE AND BEYOND HONING SV-2500 series PRECISION VERTICAL HONING SYSTEM SUNNEN S SV-2500 SERIES: PRECISION, 3-AXIS Sunnen has long set the industry standard in creating complete solutions for precision
More informationPractical Alignment Tools and Techniques
Practical Alignment Tools and Techniques Bruce Lehmann Sr. Engineer, Thin Kerf Technologies Inc Accurate sawing requires attention to proper alignment and maintenance. Alignment is critical to modem sawmills
More informationSmartCut EVS Series CNC Mills Combination of CNC technology and manual capability SC EVS-350B CNC SC EVS-550B CNC
Summit Machine Tool Manufacturing L.L.C. SmartCut EVS Series CNC Mills Combination of CNC technology and manual capability SC EVS-350B CNC SC EVS-550B CNC Summit Machine Tool Manufacturing L.L.C. SmartCut
More informationServo/Hydraulic Press Brake. HG Series HG 5020, HG 8025, HG 1303, HG 1703 HG 1704, HG 2203, HG 2204
Servo/Hydraulic Press Brake HG Series HG 5020, HG 8025, HG 1303, HG 1703 HG 1704, HG 2203, HG 2204 The HG Series Press Brake An ultra-high precision, high-speed compact bending solution featuring an advanced
More informationCIM Computer Integrated Manufacturing
INDEX CIM IN BASIC CONFIGURATION CIM IN ADVANCED CONFIGURATION CIM IN COMPLETE CONFIGURATION DL CIM A DL CIM B DL CIM C DL CIM C DL CIM B DL CIM A Computer Integrated Manufacturing (CIM) is a method of
More informationPresentation on CNC MACHINES. By: Hafiz Muhammad Rizwan
Presentation on CNC MACHINES By: Hafiz Muhammad Rizwan WELCOME CNC Machines What is a CNC Machine? CNC : Computer Numerical Control Conventionally, an operator decides and adjusts various machines parameters
More informationToll-Free: 800-272-8946 Telephone: 630-562-1400 Website: www.vogeltool.com
Toll-Free: 800-272-8946 Telephone: 630-562-1400 Website: www.vogeltool.com Supercharge your Fence & Gate Manufacturing Only $3,650! Vogel s 25 Ton Power Tower Model Tonnage Power Requirements Power Connection
More informationhttp://www.i-max.top
http://www.i-max.top Intelligent NC. Simple to operate, like a press. Requires no special skill Secure clamping of complex shapes Multi-task machining without reclamping Program supply system for quick
More informationMINIMAT-EC-Servo Screwdriver Spindles
Screwdriving technology Automation Air motors Air tools Screwdriver Spindles electric MINIMAT-EC-Servo Screwdriver Spindles Maximum Flexibility and process Control Straight Spindle Form - Torque range
More informationDITCH WITCH MT12 MICROTRENCHER. ditchwitch.com
DITCH WITCH MT12 MICROTRENCHER ditchwitch.com Rule With An Iron Fist. ditchwitch.com DITCH WITCH MT12 MicroTrencher Throughout the world, demand is increasing for faster broadband communications, necessitating
More informationLINEAR MOTION CONTROL
LINEAR MOTION CONTROL Technical Data Sheet Static Locks RLSS Series Nexen s new generation of linear holding/locking devices take rod locking technology to the next level. With superior performance, these
More informationHow To Build A Powerplant With A Powerplant
CNC-Processing Center Venture 108 2014/2015 Venture 108 Highlights: Routing dimension in Y direction: 1550 mm Vector speed X/Y 80 m/min Simple positioning of the vacuum cups through the pin laser 24 vacuum
More informationTSM 280 ROTARY TABLE TRANSFER MACHINE
TSM 280 ROTARY TABLE TRANSFER MACHINE ROTARY AND LINEAR INDEXING MACHINE PRECISION BY THE SECOND Individual production processes Cold extrusion parts Tubes Turned parts Long turned parts Bar material Coil
More informationThe Speed of Live and the Accuracy of Fixed
The Speed of Live and the Accuracy of Fixed SG10A CYLINDER HEAD SEAT & GUIDE MACHINE Light Weight Work Head The SG10A has a light weight work head for fast and accurate centering for the minimum concentricity.
More informationDRILLFLEX CNC HORIZONTAL MACHINING CENTER
DRILLFLEX CNC HORIZONTAL MACHINING CENTER 02 DRILLFLEX CNC HORIZONTAL MACHINING CENTER MUBEA DRILLFLEX - DF 1100 TIME IS MONEY MUBEA SYSTEMS (DIVISION OF THE WORLDWIDE HACO GROUP) has developed a new automatic
More informationBED TYPE MILLING CENTRE
TR BED TYPE MILLING CENTRE TR BED TYPE MILLING CENTRE BED TYPE MILLING CENTRE HIGH PERFORMANCE IN A COMPACT MACHINE PROVIDING ACCURATE COMPLEX MILLING TR BED TYPE MILLING CENTRE The TR milling centre is
More informationWeeke CNC Machining Center, Model BP-150 Optimat
Weeke CNC Machining Center, Model BP-150 Optimat Weeke's BP-150 is a truly industrial machine designed primarily for point-topoint boring and machining of flat components without special workpiece fixtures.
More informationTechCut 4 Precision Low Speed Saw
Product Brochure TechCut 4 Precision Low Speed Saw 3" - 6" Blade Range Digital Speed Display 1-Micron Sample Indexing Spring-Loaded Dressing Stick Attachment All Aluminum & Stainless Steel Construction
More informationProfile Projector PH-3500
Optical Measuring Profile Projector PH-3500 Catalog No. E4155-172 Mitutoyo introduces the PH-3515F a series of profile projectors that will meet any optical measuring or inspection challenge your shop
More informationDUGARD. Machine Tools Since 1939. Dugard 200HT / 200MC Slant Bed, High Precision CNC Lathes. www.dugard.com
DUGARD Machine Tools Since 1939 Dugard 00HT / 00MC Slant Bed, High Precision CNC Lathes www.dugard.com Dugard 00HT / 00MC Hydraulic Tailstock Quill can be controlled by programme or manually, auto sensing
More informationGEAROLOGY 4-1 WORMS AND WORM GEARS WORMS AND WORM GEARS
GEAROLOGY 4-1 4 4-2 GEAROLOGY COMMON APPLICATIONS: Worm and worm gear sets are used in many, everyday products including: electrical mixers, hubometers, right Now that you have an understanding of two
More informationARTI Bileme GRINDING& WELDING MACHINERY
5 AXES DOUBLE WHEEL COMPLETE TOP AND FACE GRINDER IN ONE CYCLE is a fast, PC controlled, built in one central construction top and face grinder in one clamping. guarantees a smooth top and face grinding
More informationSAMSUNG Machine Tools
SAMSUNG Machine Tools LCV 55 / 65 / 8 VERTICAL MACHINING CENTERS SMEC Co., Ltd. 6671, Gasulri, Daesanmyeon, Changwonsi Gyeongsangnamdo, Korea 641921 Tel +82 55 25 4832(48) Fax +82 55 25 491(492) http://www.esmec.com
More informationUNIT 6. w w w. e g e n m a k i n a. c o m. t r
UNIT 6 w w w. e g e n m a k i n a. c o m. t r 02 Teknik Özellikler / Specifications Bant kalýnlýðý Ýþ parçasý kalýnlýðý Ýþ parçasý geniþliði (min) Çalýþma hýzý Çalýþma yüksekliði Kazan hacmi (max) Hava
More informationQP-2040L CNC VERTICAL MACHINING CENTER
Page 1 of 8 QP-2040L CNC VERTICAL MACHINING CENTER Page 2 of 8 MACHINE FEATURES: This fully upgradeable VMC is designed to accommodate various upgrades in the future so that it can be reconfigured for
More informationPrecision Vise Combinations
Precision Vise Combinations PanaVise vises and work holding tools have hundreds of uses limited only by your imagination! Each vise allows the head to Tilt, Turn & Rotate and position your work anywhere
More informationTANK FABRICATION. Automated Solutions for Your Tank Fabrication Project. Bug-o Systems www.bugo.com
TANK FABRICATION Automated Solutions for Your Tank Fabrication Project. Bug-o Systems www.bugo.com BUG-O ALL TIME GIRTH WELDER Bug-o Systems offers the Automatic Girth Welder for tank fabrication applications.
More informationSignature Norman Crepeau Special Condition Subject to prior sale Johnford ST60B. CNC Turning Center
Mr. Will Rood B & B Precise Products 25 Neck Road Benton, ME 04901 Date June 3, 2008 Quote # 06032008 Valid for 30 Days Quoted by Norman Signature Norman Crepeau Special Condition Subject to prior sale
More informationElectric Actuators and Controllers/Drivers
Electric Actuators and Controllers/Drivers Page 1 Slider Type Series LEF Page 2 Rod Type Series LEY Page 3 Electric Slide Table Series LES Page 4 Electric Rotary Table Series LER Page 5 Electric Gripper
More informationOWNER S/OPERATOR S - PARTS MANUAL CEMENT MIXER MODEL MX-80
OWNER S/OPERATOR S - PARTS MANUAL CEMENT MIXER MODEL MX-80 Read the Operator s Manual entirely. When you see this symbol, be aware that the subsequent instructions and warnings are serious - follow without
More informationTUBULAR Holing and Slotting Of Casing
TUBULAR Holing and Slotting Of Casing Holing and Slotting of Casing Introduction.................. 243-244 Slotting machines Hydraulic Handling System Holing Machines Deburring Pipe coating Banding QA
More informationTurning Centres. MAX 5 From print to part to profit
Turning Centres MAX 5 From print to part to profit TMi and TMXi General purpose, heavy duty and high performance 2 axis lathes > TM6i > TM12i > TM8i > TM18i > TM10i > TM18Li > TMX8i > TMX10i Benefits of
More informationDUGARD. DUGARD Machine. Dugard Heavy Duty Vertical Machining Centres. Machine Tools That Create Solutions Since 1939. Tools
DUGARD Machine Tools That Create Solutions Since 1939 Dugard Heavy Duty Vertical Machining Centres DUGARD Machine Tools www.dugard.com sales@dugard.com 01273 732286 The unique inverted slideway design
More informationMaxi-Stamper. 200 to 1,000 Tons STAMPING OUT DOWNTIME
TM Maxi-Stamper 200 to 1,000 Tons STAMPING OUT DOWNTIME Standard Features Steel Fabricated Construction Drive Capacity Rated 1/2 Above Bottom of Stroke Self-Diagnostic Solid State Controller Moveable Operator
More informationHOLZMA HPP 350 with Cadmatic 4.0
Holzma s HPP 350 is a flexible saw center. This CNC controlled machine features fast, simple programming coupled with high operating speeds to meet today s varied production requirements. Designed for
More informationYUASA MILLING MACHINE ACCESSORIES & TOOLS
97 HORIZONTAL / VERTICAL 5C COLLET INDEX 550 series 2 YEAR WARRANTY Spindle is manufactured with a taper seat in body frame. Rapid opening and closing is performed with a level collet closer with a leverage
More informationSPEEDROC D30. Surface Drill Rig for marble, granite, sandstone and limestone in the dimension stone industry.
SPEEDROC D0 Surface Drill Rig for marble, granite, sandstone and limestone in the dimension stone industry. SPEED UP YOUR PROFITS SPEEDROC D0 IS A VERSATILE AND FLEXIBLE DRILL RIG, TAILORMADE FOR THE DIMENSION
More informationWhen looking at machine tools, the details of the installed drive technology usually
Multiple Solutions: Different Drive Concepts for Machine Tools When looking at machine tools, the details of the installed drive technology usually remain concealed. There are, in principle, various possibilities
More informationS40. The Allrounder for complex grinding jobs.
S40 The Allrounder for complex grinding jobs. Advantages S40 Dimensions Distance between centres 1000/1600 mm (39.4 /63 ) Height of centres 175/225 mm (6.9 /8.9 ) Maximum workpiece weight 130/150 kg (286/330
More informationAXIS DESIGNATION IN NC PART PROGRAMMING
AXIS DESIGNATION IN NC PART PROGRAMMING 1 FUNCTIONS PERFORMED BY THE CONTROL SYSTEM OF NC MACHINE TOOL DISPLACEMENT OF SLIDE MEMBERS. ANGULAR ROTATION OF THE CIRCULAR TABLE. STOP / START MAIN SPINDLE.
More informationTensioning, Winding and Unwinding
General Winding is the process of taking up a web or a strand of a long length of material onto a beam, a cone, a core, a drum or a spool; primarily for handling convenience for end use or reprocessing.
More informationTA-A BED TYPE MILLING CENTRE
TA-A BED TYPE MILLING CENTRE TA-A BED TYPE MILLING CENTRE MILLING CENTRE HIGH CAPACITY IN A COMPACT MACHINE High stock removal capacity TA-A BED TYPE MILLING CENTRE 2 TA-A The TA-A milling centre is a
More informationWhirling Machine. New Dimension of Whirling Technology. Thread Whirling Machines. Big Workpiece Diameter. High Pitch Thread
LEISTRITZ PRODUKTIONSTECHNIK GMBH Thread Whirling Machines Whirling Machine New Dimension of Whirling Technology Big Workpiece Diameter High Pitch Thread Customer Satisfaction remains the Highest Priority
More informationCOLLEGE OF ENGINEERING AND APPLIED SCIENCE MACHINE SHOP TOOLS AND PRACTICES
COLLEGE OF ENGINEERING AND APPLIED SCIENCE MACHINE SHOP TOOLS AND PRACTICES I. OBJECTIVE To provide an overview and basic knowledge of the University of Wyoming, College of Engineering, equipment, tools,
More informationStarChip 400. StarChip 400. More productive, more cost-effective - the Inclined Bed Lathe StarChip. CNC Inclined Bed Lathe. www.knuth.
CNC Inclined Bed Lathe More productive, more cost-effective - the Inclined Bed Lathe StarChip Center width 550 mm Turning diameter over bed (max) 360 mm Speed range 50-6000 min -1 8-station tool turret
More informationSQUARE TRUSS: 2' long square truss SUPPORT BARS:
play Technolo SQUARE TRUSS: DP-T12 DP-T10 DP-T08 DP-T06 DP-T05 DP-T04 DP-T03 DP-T02 12' long square truss 10' long square truss 8' long square truss 6' long square truss 5' long square truss 4' long square
More informationHighly Automated Punch and Laser Combination System. ACIES Series ACIES 2512T & ACIES 2515T
Highly Automated Punch and Laser Combination System ACIES Series ACIES 2512T & ACIES 2515T Highly Automated Completion of Complex Tasks Amada s new ACIES series of punch and laser combination machines
More informationConfigured Linear Motion Assemblies Reduce Engineering and Assembly Costs and Leadtime
Configured Linear Motion Assemblies Reduce Engineering and Assembly Costs and Leadtime Kyle Thompson, Associate Product Line Manager Thomson Industries, Inc. www.thomsonlinear.com www.linearmotioneering.com
More informationCOIL PAC. Subec AB, Sprängarvägen 16, 132 38 Saltsjö-Boo, Sweden, Tel.: +46 8 884633, Fax: +46 8 977658, e-mail: info@subec.se
COIL PAC Subec AB, Sprängarvägen 16, 132 38 Saltsjö-Boo, Sweden, Tel.: +46 8 884633, Fax: +46 8 977658, e-mail: info@subec.se Description of the machine Coil Pac 240 und Coil Pac 400 are two types of
More informationCNC HARDWARE & TOOLING BASICS
Computer Aided Manufacturing (CAM) CNC HARDWARE & TOOLING BASICS Assoc. Prof. Dr. Tamer S. Mahmoud 1. Parts of CNC Machine Tools Any CNC machine tool essentially consists of the following parts: Part Program,
More informationCNC Gantry-Processing Centers Vantage 100
CNC Gantry-Processing Centers The compact nesting machine in gantry design Our CNC processing centers are already offering the technology of the future. Why? Tradition.»Made in Germany«is our motivation
More informationMACHINING OPERATIONS AND MACHINE TOOLS
MACHINING OPERATIONS AND MACHINE TOOLS 1. Turning and Related Operations 2. Drilling and Related Operations 3. Milling 4. Machining & Turning Centers 5. Other Machining Operations 6. Shape, Tolerance and
More informationPoint K2. D ouble D ynamic T ransport. Vitap.com
Point K2 D ouble D ynamic T ransport 1 Vitap.com X Jobs Catalogue Optimize panel cutting A compact CNC machine that can achieve the following functions: Drill holes in 5 directions & perform grooving operations
More informationChapter 6 Machining Center Carbide Insert Fundamentals
This sample chapter is for review purposes only. Copyright The Goodheart-Willcox Co., Inc. All rights reserved. N10G20G99G40 N20G96S800M3 N30G50S4000 N40T0100M8 N50G00X3.35Z1.25T0101 N60G01X3.25F.002 N70G04X0.5
More informationŠKODA MACHINE TOOL HORIZONTAL MILLING AND BORING MACHINES ŠKODA HCW
ŠKODA MACHINE TOOL HORIZONTAL MILLING AND BORING MACHINES ŠKODA HCW KODA HCW TRADITION AND EXPERIENCE The ŠKODA machine tools of different types and design have been present in the world market since the
More informationLU6X-130 Instructions and Parts List (including LU6X Basic) Operating Instructions
LORTONE LU6X-130 Item # 061-092 LU6X Basic Item # 061-090 LU6X-130 Instructions and Parts List (including LU6X Basic) Operating Instructions Introduction The LU6X is one the most versatile pieces of equipment
More informationWeeke CNC Machining Center, Model BHC 550 NB
Weeke CNC Machining Center, Model BHC 550 NB Weeke's BHC-550 NB is a truly industrial machine designed primarily for boring and routing of flat components that have been nested into full sheets of material.
More informationWARNING! DO NOT ATTEMPT TO INSTALL THIS KIT IN A POWERED CONVEYOR.
Model: Document Number: 64058111 Kit Number: 64058112 Revision: 02 Description: Release Date: 04/08 Introduction This kit allows a PS90 scale to be integrated into a standard gravity conveyor. The kit
More informationRENISHAW measuring OMP 40 system EN3M0-0 Edgecam Advanced Milling ENS-M0-G EdgeCam Solid Machinist for Granite
1 Horizontal Machining Center MATSUURA Model: H-Plus 300 PC 5 Year: 2008 Control: Matsuura G-Tech 30i No. of pallets: 5 Size (each) 300 x 300 mm. Table indexation: 1 Index speed: 1,5 sek./90 Index speed:
More informationOPTICAL MEASURING MACHINES
OPTICAL MEASURIN MACHINES SYLVAC SCAN Dedicated to the fast and contactless measuring of cylindrical parts, our new SCAN machines are based on the principle of the scanner. This technique allows to reproduce
More informationIntroduction to Accuracy and Repeatability in Linear Motion Systems
Introduction to accuracy and repeatability in linear motion systems By Gary Rosengren, Director of Engineering Tolomatic, Inc. About the Author Gary Rosengren is Director of Engineering at Tolomatic and
More informationM A R C O. CP-670 AUTOMATIC CHART PROJECTOR Instruction Manual
M A R C O CP-670 AUTOMATIC CHART PROJECTOR Instruction Manual CONTENTS GENERAL DESCRIPTION............... 1 INSTALLATION...................... 2 Mounting the Projector Positioning the Projector Positioning
More informationHaitian MarsⅡ/h Series
Haitian MarsⅡ/h Series Haitian Plastics Machinery Group Co., LTD. No.1688 Haitian Road, Xiaogang, Beilun, Ningbo, P.R, China. Zipcode: 315821 Tel.: + 86 (0) 574 86175 86177242 Fax: + 86 (0) 574 86177181
More informationPos. Qty. Article Description Price / Clamping surface 1.300 x 430 mm Additional table load 1200 kg 3 T-slots 14 H12 for mounting on fixture, etc..
Offer 1 1 Vertical CNC-machining centre model STAMA MC 531 Completely refurbished pre-owned machine Year of construction: 1998, Weight: 8.000 kg Machine-No. 1113 (Picture similiar) Scope of delivery: Technical
More informationUnit 24: Applications of Pneumatics and Hydraulics
Unit 24: Applications of Pneumatics and Hydraulics Unit code: J/601/1496 QCF level: 4 Credit value: 15 OUTCOME 2 TUTORIAL 2 HYDRAULIC AND PNEUMATIC CYLINDERS The material needed for outcome 2 is very extensive
More informationMULTITURRET BAR TURNING B446-465 T2 B446-465 T3
MULTITURRET AR TURNING 446-465 T2 446-465 T3 Double-spindle and double-turret turning centres featuring two Y-axes: from bar to the finished part 446-465 T2 years after the launch of the first QUATTRO
More informationA cut above the rest. sprintcut. CNC Wirecut EDM
ZAXS I sprintcut Z AXIS sprintcut 4 axes CNC Precision LM guideways for all axes Max. cutting speed : 2 16 mm / min. (With Ø.25 special soft brass wire on 5 mm thick HCHCr (steel) workpiece) 2 14 mm /
More informationIRB 2600ID-15/1.85 Simple integration, high performance
Per Lowgren, Product Manager, Medium robots IRB 2600ID-15/1.85 Simple integration, high performance February 9, 2011 Slide 1 Overview of main features General purpose robot for integrated dressing solutions.
More informationThe word teamster today means a truck driver,
Page 47 Heron of Alexandria The word teamster today means a truck driver, but originally it meant a wagon driver, someone who drives a team of horses, mules or oxen. Over 2000 years ago teamsters in the
More informationSetting up the DeskCNC controller.
1) Determine the steps to linear motion ratios for each axis. 2 2) Determine Maximum velocity (speed). 3 3) Setting up the software Machine Tab 4 4) Setting up the software DeskCNC Setup Tab 5 5) Setting
More information8.1 HPC for improved efficiency on standard machine tools by using new fluid-driven spindles
8.1 HPC for improved efficiency on standard machine tools by using new fluid-driven spindles A. Schubert 1, O. Harpaz 2, B. Books 2, U. Eckert 1, R. Wertheim 1 1 Fraunhofer IWU, Reichenhainer Str. 88,
More informationX.mill 1100 L. X.mill 1100 L. CNC Machining Center. Control GPlus 450 with touch-screen technology or Siemens Sinumerik 828 D
CNC Machining Center Control GPlus 450 with touch-screen technology or Siemens Sinumerik 828 D description specifications GPlus 450 siemens 828 D www. k n u t h.d e Travel distances X axis 1100 mm Y axis
More informationAssembly Instructions Basic Folding-Leg Box Frame Style
Assembly Instructions Basic Folding-Leg Box Frame Style Basic Folding Leg Cornhole Board Concept 1 2 12 3 1 2 3 15 16 4 1 4 52 9 R1 3 4 6 21 48 12 1 4 Bolt Washer 9 13 16 35 Washer Double Nut CornholePlayers.net
More informationCircular saw benches Safe working practices
Circular saw benches Safe working practices HSE information sheet Introduction This information sheet is one of a series produced by HSE s manufacturing sector. It gives practical guidance on safe working
More informationROUNDO 3-Roll Plate Bending Machines Type PS
ROUNDO 3-Roll Plate Bending Machines Type PS Universal Machine used for all Plate Bending Double Pinch Design 1. Align the plate using the alignment grooves in the lower rolls or against the rear roll.
More informationLathe Milling Attachment
Lathe Milling Attachment By L C. MASON BY CLEVERLY stacking cold-rolled flat stock together, T-slots and slide for this lathe milling attachment are made without costly machinery. In fact, only two tools,
More information