Environmental Product Declaration Basalite with CarbonCure
|
|
- Todd Vernon Marsh
- 7 years ago
- Views:
Transcription
1 Environmental Product Declaration Basalite with CarbonCure 313 MWA Sandstone Concrete Masonry Unit with CarbonCure 1
2 Introduction Basalite has commissioned CarbonCure Technologies for this Environmental Product Declaration (EPD) to provide environmental information about 313 MWA Sandstone Concrete Masonry Units made with CarbonCure s technology from raw material extraction through shipment to the customer (cradle-to-gate). The information provided here meets the requirements of ISO 21930, as well as the Concrete Product Category Rule. Product Manufacturer This EPD was issued for Basalite 313 MWA Sandstone Concrete Masonry Units with CarbonCure. Commissioner This EPD was commissioned by CarbonCure Technologies. Product Category Rule The Carbon Leadership Forum PCR: Product Category Rules (PCR) for ISO Type III Environmental Product Declarations (EPDs) Concrete, Version 1.1 dated 12/4/2013, serves as the PCR for this EPD. Verification Independent verification of the declaration, according to ISO 14025:2006 internal external Date of Issue and Period of Validity This EPD was issued on November 1st, 2014 and is valid for 5 years until November 1st, Product Description This Environmental Product Declaration (EPD) reports the impacts of concrete masonry units (CMU) products: ASTM C90 Load Bearing Concrete Masonry Units CSI Specification Sector Concrete Unit Masonry UNSPSC Code Concrete Blocks The product has compressive strength of 20 MPa (3,000 psi) at 28 days. 2
3 Life cycle assessment A summary of life cycle stages included in the EPD is as follows: 1. Raw Material Supply (upstream processes): Extraction, handling and processing of the raw materials used in production of concrete: cement, supplementary cementitious materials, aggregate (coarse and fine), water, admixtures and other materials or chemicals used in concrete mixtures. 2. Transportation: Transportation of these materials from supplier to the 'gate' of the concrete producer. 3. Manufacturing (core processes): The energy used to store, batch, mix and distribute the concrete and operate the facility (concrete plant). 4. Water use in mixing and distributing concrete. A summary of processes excluded from the EPD is as follows: 1. Production, manufacture and construction of buildings, capital goods and infrastructure. 2. Production and manufacture of concrete production equipment, concrete delivery vehicles, earthmoving equipment and laboratory equipment. 3. Personnel related activities (e.g. travel, furniture, office supplies). 4. Energy and water use related to company management and sales activities. 5. Impacts related to the disposal or end of life of the concrete product. A summary of the limitations of this EPD include: 1. This EPD does not report all of the environmental impacts due to manufacturing of the product, but rather reports the environmental impacts for those categories with established life cycle assessment based methods to track and report. Unreported environmental impacts include (but are not limited to) factors attributable to human health, land use change and habitat destruction. 2. This EPD reports the results of an LCA for 'cradle-to-gate' analysis. Thus declarations themselves are not comparative assertions, defined as an environmental claim regarding the superiority of equivalence of one product versus a competing product that performs the same function. An EPD does not make any statements that the product covered by an EPD is better or worse than any other product. 3. In order to assess the local impacts of product manufacturing, additional analysis is required. 4. Life Cycle Impact Assessment results are relative expressions and do not predict impacts on category endpoints, the exceeding of thresholds, safety margins or risks. 3
4 Data quality and variability This EPD was created using plant-specific data for upstream materials. Potential variations due to supplier locations, manufacturing processes and efficiencies and fuel use are thus accounted for in this EPD. Material LCI data sources LCI process Geography, Year Portland cement, at plant, no USEI 2.2 (modified EI 2.2) Portland cement, at plant USA, 2002 infrastructure/kg NREL/US U (kg) NREL/US U Gravel, unspecified, at mine, no USEI 2.2 (modified EI 2.2) Gravel, unspecified, at USA, 2001 infrastructure/us US-EI U (kg) mine/us US-EI U Plasticising Admixtures, Normal, EFCA Environmental Plasticizing Admixtures, Europe, 2006 (kg) Declaration: Plastisicing Normal Admixtures Diesel Consumed (gal) USEI 2.2 (modified USLCI) Diesel, combusted in industrial equipment NREL/US U Natural gas, combusted in US EI 2.2 (modified EI 2.2) Natural gas, at power plant/us industrial boiler/m 3 /US (gal) US-EI U Disposal, concrete, 5% water, to Producer Concrete Disposal, concrete, 5% water, WA, 2014 landfill (kg), Product batch water, to inert landfill/ US US-EI U Company Source Data, 2014 Electricity, medium voltage, at USEI 2.2 (modified EI 2.2) Electricity, medium voltage, at grid, no infrastructure/kwh/us grid, no infrastructure /US US- (kwh) EI U Water, concrete batching (m 3 ) Producer Concrete Substance water, unspecified WA, 2014 Product batch water, natural origin, WA Company Source Data, 2014 Transportation Transport, USEI 2.2 (modified USLCI) Transportation, combination combination truck, diesel truck, diesel powered NREL/US powered/tkm NREL/US U (km) U 4
5 Declared Unit The declared unit of this EPD is 1 m 3 of Basalite s Concrete Masonry Unit made with CarbonCure s technology, produced in Dupont, WA. Environmental Impacts EPDs of concrete mixtures may not be comparable if they do not comply with this standard and data from this EPD. The data cannot be used to compare between concrete mixes, construction products or concrete mixtures used in different concrete products unless the data is integrated into a comprehensive LCA. For example, precast concrete, concrete masonry units and site cast concrete all have different manufacturing processes whose impacts are attributed to different LCA stages. This precludes direct comparison between mixtures use in these different products unless all life cycle phases are included. Life Cycle Inventory Data Indicator Units Raw material supply Manufacturing Transportation Total Depletion of non-renewable energy resources Depletion of non-renewable material resources Hazardous waste MJ kg kg Non-hazardous waste kg Total primary energy consumption MJ Total water consumption m Use of renewable primary energy MJ
6 Life Cycle Impact Assessment Results Raw material Indicator Units supply Manufacturing Transportation Total Acidification kg SO 2 eq Eutrophication kg N eq Global warming kg CO 2 eq Ozone depletion kg CFC-11 eq 7.06E E E E-05 Smog kg O 3 eq References Construction Technology Laboratories, Inc. (CTL). (2002). Life Cycle Inventory of Slag Cement Manufacturing Process. CTL Project No Retrieved from EarthShift LLC. (2013). US-EI Database. Retrieved from European Federation of Concrete Admixture Associations (EFCA). (2006). EFCA Environmental Declaration: Plasticizing Admixtures. Sittard, The Netherlands. Retrieved from Frischknecht, R., Jungbluth, N., Althaus, H.-J., Doka, G., Dones, R., Heck, T., Hellweg, S., Hischier, R., Nemecek, T., Rebitzer, G., Spielmann, M. (2007). The ecoinvent Database: Overview and Methodology. Dubendorf, CH: Swiss Centre for Life Cycle Inventories. Retrieved from "U.S. Life Cycle Inventory Database." (2012). National Renewable Energy Laboratory, Retrieved from 6
Environmental Product Declaration (EPD) for Concrete
Miraflores Ready Mix Plant, Panama About Cementos Argos Panama Argos Panamá S.A., is a Panamanian cement and concrete supplier that is the market leader in the country. Through its network of ten Argos
More informationNOTE: 08/2014 revision corrects issues related allocation & slag and fly ash within the Int. EPD PCR evaluation.
Comparison of Concrete PCRs-Rev 1 This comparison of three Concrete PCRs: versions 1.0 and 1.1 of the Carbon Leadership Forum PCR and version 1.0 of the International EPD system PCR was prepared by K.
More informationBelgard Pavers Interlocking Concrete Paving Units
Belgard Pavers Interlocking Concrete Paving Units ENVIRONMENTAL PRODUCT DECLARATION VERIFICATION For over 60 years, Anchor, an Oldcastle Company based in Red Bank, NJ has been a leading manufacturer of
More informationEnvironmental Product Declaration
Environmental Product Declaration PVDF-System According to EN 15804 Circling and distribution of purified water in a pharmaceutical plant Georg Fischer Piping Systems Ltd. Ebnatstrasse 111 CH-8201 Schaffhausen
More informationPRODUCT CATEGORY RULES (PCR) FOR ISO 14025 TYPE III ENVIRONMENTAL PRODUCT DECLARATIONS (EPDs)
PRODUCT CATEGORY RULES (PCR) FOR ISO 14025 TYPE III ENVIRONMENTAL PRODUCT DECLARATIONS (EPDs) CONCRETE Meeting the requirements of one of the following: ASTM C94 ASTM C90 CSA A23.1/A23.2 UNSPSC code 30111500
More informationNEPD nr.: 221E ver 2.1. The declaration has been prepared by Thale Plesser, SINTEF Building and Infrastructure
Environmental Product Declaration ISO 14025, EN 15804 NEPD nr.: 221E ver 2.1 Glava glass wool Approved according to ISO 14025:2006, 8.1.4 and NS-EN 15804:2012 Approved: ϭϭ.ϭϭ.2013 Valid until: ϭϭ.ϭϭ.2018
More informationProtan SE 1.2 Roof Membrane Product
29.10.2013 ENVIRONMENTAL PRODUCT DECLARATION ISO 14025 ISO 21930 EN 15804 Owner of the declaration Program holder Publisher Declaration number Issue date Valid to NEPD-00032E rev1 22.01.2013 22.01.2018
More informationMETHODOLOGY OF LIFE-CYCLE ASSESSMENT OF RC STRUCTURES USING HIGH PERFORMANCE CONCRETE
METHODOLOGY OF LIFE-CYCLE ASSESSMENT OF RC STRUCTURES USING HIGH PERFORMANCE CONCRETE Ctislav FIALA CTU in Prague, Thákurova 7, 166 29 Prague 6, Czech Republic, ctislav.fiala@fsv.cvut.cz Magdaléna NOVOTNÁ
More informationEnvironmental Product Declaration EPD
Environmental Product Declaration EPD May 2014 EPD The company Europrofil AB, founded 1982, is the leading producer of light gauge steel profiles for the building construction industry. Headquarters and
More informationProduct Category Rules (PCR) For Preparing an Environmental Product Declaration for:
Product Category Rules (PCR) For Preparing an Environmental Product Declaration for: Segmental Concrete Paving Products (UN CPC 3755) The product group includes precast concrete pavers, precast concrete
More informationGYPSUM ASSOCIATION LIFE-CYCLE ASSESSMENT SUMMARY
GYPSUM ASSOCIATION LIFE-CYCLE ASSESSMENT SUMMARY GYPSUM ASSOCIATION The Gypsum Association (GA) is an international, not-for-profit trade association that is tax exempt under Section 501 (c) 6 of the Internal
More informationZinkbolt. ENVIRONMENTAL PRODUCT DECLARATION in accordance with ISO 14025, ISO 21930 and EN 15804 Owner of the declaration:
ENVIRONMENTAL PRODUCT DECLARATION in accordance with ISO 14025, ISO 21930 and EN 15804 Owner of the declaration: Program operator: Publisher: Declaration number: ECO Platform reference number: 00000280
More informationA clean energy solution from cradle to grave
Environmental Product Declaration A clean energy solution from cradle to grave Offshore wind power plant employing SWT-6.0-154 siemens.com / wind 2 Assessing the performance of a wind power plant The environmental
More informationManufactured Concrete and Concrete Masonry Products (UN CPC 3755)
PRODUCT CATEGORY RULES FOR PREPARING AN ENVIRONMENTAL PRODUCT DECLARATION FOR MANUFACTURED CONCRETE AND CONCRETE MASONRY PRODUCTS Manufactured Concrete and Concrete Masonry Products (UN CPC 3755) The product
More informationENVIRONMENTAL PRODUCT DECLARATION as per ISO 14025 and EN 15804
ENVIRONMENTAL PRODUCT DECLARATION as per ISO 14025 and EN 15804 Owner of the Declaration EGE PROFİL Tic. ve San. A.Ş. Programme holder Institut Bauen und Umwelt e.v. (IBU) Publisher Institut Bauen und
More informationENVIRONMENTAL Product Declaration as per ISO 14025 and EN 15804. Akçansa Çimento Sanayi ve Ticaret A.Ş. Portland Cement CEM I 42.
ENVIRONMENTAL Product Declaration as per ISO 14025 and EN 15804 Owner of the Declaration Programme holder Institut Bauen und Umwelt e.v. (IBU) Publisher Institut Bauen und Umwelt e.v. (IBU) Declaration
More informationGypsum plasterboard RIGIPS PRO and RIGIPS 4PRO. Environmental Product Declaration. EPD program operator. Manufacturer
Gypsum plasterboard RIGIPS PRO and RIGIPS 4PRO Environmental Product Declaration Issuance date: 01.07.2014 Validity date: 01.07.2019 ITB is the member of The European Platform for EPD program operators.
More informationADDENDUM. Product Category Rules for preparing an environmental product declaration (EPD) for PCR:
l ADDENDUM Product Category Rules for preparing an environmental product declaration (EPD) for PCR: Taiwan Electric Wire and Cable Association Product Category Rules Wire and Cable PCR 2013:1.0 July 2014
More informationThe BOMBARDIER* REGINA*
TALENT 2 REGINA Intercity X55 Environmental Product Declaration Environmental Product Declaration The BOMBARDIER* REGINA* Intercity X55 train reflects our dedication to developing products and services
More informationBASIS cement ENVIRONMENTAL PRODUCT DECLARATION. Aalborg Portland A/S ISO 14025 ISO 21930 EN 15804. The Norwegian EPD Foundation 07.02.2013 07.02.
17.12.213 ENVIRONMENTAL PRODUCT DECLARATION ISO 1425 ISO 2193 EN 1584 Owner of the declaration Program holder Publisher Declaration number Issue date Valid to NEPD-161E 7.2.213 7.2.218 BASIS cement CEM
More informationGlasopor 10-60 (Cellular glass aggregate) Product
1114 Ver. 2:214 ENVIRONMENTAL PRODUCT DECLARATION In accordance with ISO 1425 ISO 2193 EN 1584 Publisher The Norwegian EPD Foundation Declaration number NEPD15E Rev 1 27.1.214 Issue date 27.1.219 Valid
More informationECOTOUCH FLAME SPREAD 25 INSULATION
ENVIRONMENTAL PRODUCT DECLARATION ECOTOUCH FLAME SPREAD 25 INSULATION Owens Corning, and its family of companies, is a leading global producer of residential and commercial building materials, glass-fiber
More informationquantifying and reducing the carbon footprint of a concrete building
Proposed methodology for Proposed methodology for quantifying and reducing the carbon footprint of a concrete building Introduction Many projects have the objective of quantifying and demonstrating a reduction
More informationGlasopor 10-60 (Cellular glass aggregate) Product
1114 Ver. 2:214 ENVIRONMENTAL PRODUCT DECLARATION In accordance with ISO 1425 ISO 2193 EN 1584 Publisher The Norwegian EPD Foundation NEPD28E Declaration number 27.1.214 Issue date 27.1.219 Valid to epd-norge
More informationLIFE CYCLE ASSESSMENT ON COTTON AND VISCOSE FIBRES FOR TEXTILE PRODUCTION
LIFE CYCLE ASSESSMENT ON COTTON AND VISCOSE FIBRES FOR TEXTILE PRODUCTION Janka Dibdiakova, Volkmar Timmermann Norwegian Forest and Landscape Institute (NFLI) Ås, Norway COST FP1205 Innovative applications
More information- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Levi Strauss & Co. Life Cycle Approach to Examine the Environmental Performance of its Products Levi Strauss & Co. (LS&Co.) is focused on building sustainability into everything we do. In 2007 LS&Co. commissioned
More informationEnvironmental Product Declaration. Registration number: S-P-00047. Rev. 0 11/06/03. Tmax T1. Low voltage circuit breaker.
Environmental Product Declaration Registration number: S-P-00047 Rev. 0 11/06/03 Tmax T1 Low voltage circuit breaker ABB SACE SpA Information about the company and the product This document aims to provide
More informationENVIRONMENTAL PRODUCT DECLARATION
ENVIRONMENTAL PRODUCT DECLARATION RBI 12.5mm Rigips Wet Areas Plasterboard Date of issue: March 2015 Valid until: March 2020 Declaration Number 3013EPD-14-0509 1. General information Manufacturer: Saint-Gobain
More informationENVIRONMENTAL PRODUCT DECLARATION as per ISO 14025 and EN 15804
ENVIRONMENTAL PRODUCT DECLARATION as per ISO 1425 and EN 1584 Owner of the Declaration AKG GAZBETON ISLETMELERI SAN. TIC. Ve A.S Programme holder Institut Bauen und Umwelt e.v. (IBU) Publisher Institut
More informationENVIRONMENTAL PRODUCT DECLARATION as per ISO 14025
ENVIRONMENTAL PRODUCT DECLARATION as per ISO 14025 Owner of the Declaration Programme holder Publisher Declaration number Issue date Valid to Kaleseramik Çanakkale Kalebodur Ceramic Industries Inc. Institut
More informationState of the art sustainability marketing tools
State of the art sustainability marketing tools Anne-Marie Imrell ABB AB 2003 ABSTRACT This report belongs to the DANTES project that is supported by the EU Life Environment Program. Examination of how
More informationLife Cycle Assessment of Swiss Electricity Mixes
Life Cycle Assessment of Swiss Electricity Mixes Implemented in ecoinvent data v2.2 (2010) Authors Marianne Leuenberger Rolf Frischknecht ESU-services Ltd. Uster, June 2010 Report ESU-services Ltd. Kanzleistrasse
More informationLife Cycle Assessment of Newsprint Distribution at an Integrated Mill. Erica Salazar, M.Sc.A. (P2004)
Life Cycle Assessment of Newsprint Distribution at an Integrated Mill Erica Salazar, M.Sc.A. (P2004) Introduction Life Cycle Thinking is being promoted among different sectors involved in product chains.
More informationA Comparative Life Cycle Analysis:
A Comparative Life Cycle Analysis: Natural Fur and Faux Fur Submitted to International Fur Trade Federation Submitted by DSS Management Consultants Inc. October, 2012 TABLE OF CONTENTS 1 INTRODUCTION...
More informationNorgips Rehab type A (RHB) Product
1114 Ver. 2:214 ENVIRONMENTAL PRODUCT DECLARATION In accordance with ISO 1425 ISO 2193 EN 1584 Publisher Declaration number Issue date Valid to The Norwegian EPD Foundation NE 2 EN, updated..2..2 2 Norgips
More informationBirmingham City University / Students Union Aspects and Impacts Register. Waste. Impacts description
Birmingham City University / Students Union and Impacts Register Waste Production of non - hazardous waste Production of hazardous waste Storage of non - hazardous waste Potential for waste to be disposed
More informationCarbon Sequestration Tool Background and User Guide
Carbon Sequestration Tool Background and User Guide Table of Contents Quick Start Methodology Content of Worksheets Frequently Asked Questions Quick Start 1. Determine which of the two carbon tools you
More informationHow To Understand The Environmental Impacts Of A Plastic Bottle
COUPLING LIFE CYCLE ASSESSMENT AND PROCESS SIMULATION TO EVALUATE THE ENVIRONMENTAL IMPACTS OF PLASTICS WASTE MANAGEMENT: APPLICATION TO PET BOTTLES RECOVERY LCA SRCR 14 12-13 June 2014, Falmouth Amélie
More informationCOMMUNICATING LIFE-CYCLE ASSESSMENT RESULTS: A COMPARISON OF VEHICLE ALTERNATIVES IN PORTUGAL
Energy for Sustainability 2013 Sustainable Cities: Designing for People and the Planet Coimbra, 8 to 10 September, 2013 COMMUNICATING LIFE-CYCLE ASSESSMENT RESULTS: A COMPARISON OF VEHICLE ALTERNATIVES
More informationMEASURING THE LIFE-CYCLE ENVIRONMENTAL AND ECONOMIC PERFORMANCE OF CONCRETE: THE BEES APPROACH
213 MEASURING THE LIFE-CYCLE ENVIRONMENTAL AND ECONOMIC PERFORMANCE OF CONCRETE: THE BEES APPROACH Barbara C. Lippiatt 1 and Shuaib Ahmad 2 1 Building and Fire Research Laboratory, National Institute of
More informationSolid softwood panelling for interior use Product
1114 Ver. 2:2014 ENVIRONMENTAL PRODUCT DECLARATION in accordance with ISO 14025, ISO 21930 and EN 15804 Owner of the declaration Norwegian Wood Industry Federation Publisher The Norwegian EPD Foundation
More informationPCR: NPCR010 Building boards
ENVIRONMENTAL DECLARATION, ISO 14025 & ISO 21930 Gyproc Rehab 6,5 mm, GSE 6 NEPD NO: 222E Approved according to ISO14025, 8.1.4: 11.11.2011 Valid until : 11.11.2016 Verification of data: Independent verification
More informationCan ISO standards on LCA support full harmonization? Kurt Buxmann Zürich, Sept. 9, 2014
Can ISO standards on LCA support full harmonization? Kurt Buxmann Zürich, Sept. 9, 2014 ISO Standards on LCA History and First Generation 1985 1990: Different approaches to quantify environmental issues
More informationPCR: NPCR010 Building boards
ENVIRONMENTAL DECLARATION, ISO 14025 & ISO 21930 Gyproc Plasterboard 12,5 mm, GN13 NEPD NO: 223E Approved according to ISO14025, 8.1.4: 11.11.2011 Valid until : 11.11.2016 Verification of data: Independent
More informationProduct-Category Rules (PCR) for Preparing an Environmental Product Declaration (EPD) for. Air Conditioners PCR 2011:1.0
Product-Category Rules (PCR) for Preparing an Environmental Product Declaration (EPD) for Air Conditioners PCR 2011:1.0 SAMPO CORPORATION Version 1.0 2011-12-31 Table of Contents 1. General information
More informationProduct Environmental Profile Step Down Transformers
Product Environmental Profile Step Down Transformers Product overview Step-down transformers are used to convert a higher input voltage (208-200 V) to a lower output voltage (120-100 V). They are used
More informationProduct Category Rules (PCR) for Preparing an Environmental Product Declaration (EPD) for. VoIP Phones PCR 2011:1.0
Product Category Rules (PCR) for Preparing an Environmental Product Declaration (EPD) for VoIP Phones PCR 2011:1.0 Universal Microelectronics Co., Ltd. Version 1.0 2011-03-31 Table of Contents 1. General
More informationConclusions and Summary Report Environmental Life Cycle Assessment of Highway Guard Rail Posts
Conclusions and Summary Report Environmental Life Cycle Assessment of Highway Guard Rail Posts ISO 14044 Compliant Prepared by: AquAeTer, Inc. Treated Wood Council (2013) Conclusions and Summary Report
More informationArcher K-2355 Undermount bathroom sink
Archer K2355 Undermount bathroom sink Archer offers a timeless appeal, blending subtle elements of Craftsman woodworking techniques and the intricate facets of jewelry. Distinguished by its beveled edges
More informationHÅG Capisco 8105 Product
16.12.2014 ENVIRONMENTAL PRODUCT DECLARATION in accordance with ISO 14025 Owner of the declaration Program holder Declaration number Issue date Valid to EPD Norge LOGO The Norwegian EPD Foundation NEPD00038E
More informationLife Cycle Assessment of Swiss Chocolate
Life Cycle Assessment of Swiss Chocolate Niels Jungbluth, Alex König, ESU-services Ltd, Zürich SETAC Europe 24th Annual Meeting Bale, 15 th May 2014 E S U Key questions What are the differences between
More informationSteel as construction material NPCR 013, Rev. 1, Steel as construction material
PRODUCT-CATEGORY RULES EN 15804 NPCR 013rev1 Issue date: 22.08.2013 Valid to: 22.08.2018 Steel as construction material NPCR 013, Rev. 1, Steel as construction material Content Content... 2 Introduction...
More informationData Center Life Cycle Analysis. Christophe Garnier EMEA Technical Work Group Member Schneider Electric
Data Center Life Cycle Analysis Christophe Garnier EMEA Technical Work Group Member Schneider Electric V3 The 3 Pillars of Sustainability Sustainability = meet the needs of the present without compromising
More informationEmbodied CO 2 e of UK cement, additions and cementitious material
Fact Sheet 18 Embodied CO 2 e of UK cement, additions and cementitious material 1 Introduction The information in this fact sheet is aimed at providing lifecycle 1 to inform carbon footprinting in the
More informationEXECUTIVE SUMMARY ES-1
EXECUTIVE SUMMARY This report presents the results of a voluntary, cooperative project among the Design for the Environment (DfE) Program in the Economics, Exposure, and Technology Division of the U.S.
More informationHÅG SoFi with high back and aluminium armrests with TPU tops Product
25.6.2015 ENVIRONMENTAL PRODUCT DECLARATION In accordance with ISO 14025 Owner of the declaration Program holder and publisher Declaration number Issue date Valid to The Norwegian EPD Foundation NEPD 33
More informationEPD you will find: DECLARED PRODUCT. Information about basic material and the material s origin produced Description of the product s manufacture
DUNE CEILING PANELS MINERAL FIBER INSERT PRODUCT Prelude XL NAME, Suprafine XL, Silhouette XL, Interlude XL Suspension Systems Steel INSERT PRODUCT CATEGORY/DESCRIPTOR According to ISO 4025 This declaration
More informationEnvironmental Product Declaration Vinyl Composition Tile
Environmental Product Declaration Environmental Luxury Vinyl Tile Product (Solid Declaration Vinyl Tile) Vinyl Composition Tile Luxury Vinyl Tile (LVT) Committed to Sustainability. Armstrong is committed
More informationEnvironmental Product Declarations at Bombardier Transportation
Environmental Product Declarations at Bombardier Transportation Dr. Kathy Reimann EPD stakeholder conference - 15 May 2012 Bombardier Transportation EcoEfficient Optimised Environmental Performance Life
More informationALUMINUM EXTRUSIONS ANODIZED, PAINTED AND MILL-FINISH
ENVIRONMENTAL PRODUCT DECLARATION ALUMINUM EXTRUSIONS ANODIZED, PAINTED AND MILL-FINISH Kawneer Company, Inc., part of Alcoa's global Building and Construction Systems (BCS) business, has provided the
More informationLegrand's environmental commitments
128 Av. du Maréchal-de-Lattre-de-Tassigny 87045 Limoges Cedex - France Tel.: 05 55 06 87 87 - Fax: 05 55 06 88 88 i Your usual Sales office Website www.legrand.fr Product Environmental Profile plate and
More informationEPD - VERIFICATION. Saint-Gobain ISOVER. Information for the verification of Environmental Product Declarations of Saint-Gobain Products
AIB-VINÇOTTE International nv Business Unit Vinçotte Environment, Safety and Sustainability Eploitatiezetel: Business Class Kantorenpark Jan Olieslagerslaan 35 1800 Vilvoorde België Tel +32 (0)2 674 57
More informationThe new Audi TT Coupé. Life Cycle Assessment
The new Audi TT Coupé Life Cycle Assessment Content Foreword Life cycle assessment what s involved Life cycle assessment the boundaries Life cycle assessment the effect categories Lightweight construction
More informationParoc Insulation, product group with density <70 kg/m³ Product
1114 Ver. 2:2014 ENVIRONMENTAL PRODUCT DECLARATION ISO 14025 ISO 21930 EN 15804 Owner of the declaration Publisher Declaration number Issue date Valid to epd-norge logo Paroc AB The Norwegian EPD Foundation
More informationFinal Report. Life Cycle Impact Assessment of Aluminum Beverage Cans. Aluminum Association, Inc. Washington, D.C. PE Americas.
May 21, 2010 Final Report Life Cycle Impact Assessment of Aluminum Beverage Cans Prepared for: Aluminum Association, Inc. Washington, D.C. Prepared by: Contact: Nuno da Silva Neil d Souza 344 Boylston
More informationLife Cycle Assessment of Hand Drying Systems
Life Cycle Assessment of Hand Drying Systems September 19, 2011 Commissioned by Dyson, Inc. Prepared by Materials Systems Laboratory Massachusetts Institute of Technology Trisha Montalbo Jeremy Gregory
More informationPrinted circuit board [EDP 2005-108(0)]
Printed circuit board [EDP 2005-108(0)] 1. General 1.1. Scope and definition This requirement specifies technical considerations, declaration format and communication necessary for developing and issuing
More informationLonbakken Steel Staircase t. 6100 Product
1114 Ver. 2:2014 ENVIRONMENTAL PROUCT ECLARATION In accordance with ISO 14025 ISO 21930 EN 15804 Publisher eclaration number Issue date Valid to epdnorge logo The Norwegian EP Foundation NEP00282E 25.11.2014
More informationOriginal Research Life Cycle Assessment of Municipal Solid Waste Management Comparison of Results Using Different LCA Models
Pol. J. Environ. Stud. Vol. 24, No. 1 (2015), 125-140 DOI: 10.15244/pjoes/26960 Original Research Life Cycle Assessment of Municipal Solid Waste Management Comparison of Results Using Different LCA Models
More informationShotcrete Quality Control and Testing for an Underground Mine in Canada
Shotcrete Quality Control and Testing for an Underground Mine in Canada By Dudley R. (Rusty) Morgan and Mazin Ezzet AMEC Earth & Environmental, a division of AMEC Americas Limited SHOTCRETE FOR AFRICA
More informationEnvironmental Product Declaration. Vinyl Composition Tile. Vinyl Composition Tile (VCT) According to ISO 14025
Environmental Product Declaration Environmental Vinyl Composition Product TileDeclaration Vinyl Composition Tile Vinyl Composition Tile (VCT) Committed to Sustainability. Armstrong is committed to delivering
More informationCGA Standard Practices Series. Article 600 Standard for Pozzolan Enhanced Grouts Used in Annular Seals & Well Destruction
California Groundwater Association An NGWA Affiliate State PO Box 14369 Santa Rosa CA 95402 707-578-4408 fax: 707-546-4906 email: cga@groundh2o.org website: www.groundh2o.org CGA Standard Practices Series
More informationLife Cycle Assessment of Deinked and Virgin Pulp FINAL
Life Cycle Assessment of Deinked and Virgin Pulp Prepared for: National Geographic Washington DC Prepared by: ENVIRON International Corporation Denver, CO Date: November 2012 Project Number: 3224568B 1
More informationGeneral Structure of Life Cycle Impact Assessment Lecture. Mark Huijbregts Department of Environmental science Radboud University
General Structure of Life Cycle Impact Assessment Lecture Mark Huijbregts Department of Environmental science Radboud University Topics Life cycle impact assessment structure Simple vs complex LCIA methods
More informationLIFE-CYCLE IMPACTS AND COSTS OF MANGANESE LOSSES AND RECOVERY DURING FERROMANGANESE PRODUCTION
LIFE-CYCLE IMPACTS AND COSTS OF MANGANESE LOSSES AND RECOVERY DURING FERROMANGANESE PRODUCTION L.A. Westfall 1, M.H. Cramer 1, J. Davourie 1, D. McGough 2 and M. Ali 1 1 Hatch Ltd., 2800 Speakman Drive,
More informationPRODUCT - SPECIFIC REQUIREMENTS (PSR) Wood particleboards PSR 2003:8. The Swedish Environmental management Council Version 1.
EPD R PRODUCT - SPECIFIC REQUIREMENTS (PSR) for preparing an environmental product declaration (EPD) for Product Group Wood particleboards PSR 2003:8 The Swedish Environmental management Council Version
More informationProduct Category Rules (PCR) for preparing an Environmental Product Declaration (EPD) for. USB Flash Drive PCR 2011:1.0
Product Category Rules (PCR) for preparing an Environmental Product Declaration (EPD) for USB Flash Drive PCR 2011:1.0 Transcend Information, Inc. Version 1.0 2011-03-31 Table of Contents 1. General Information...
More informationEnvironmental protection and products
Environmental protection and products Protection of the environment enjoys high priority at Siemens. To best fulfill our responsibilities in this field, we are pursuing a holistic approach: Our focus is
More informationScreening Study of Life Cycle Assessment (LCA) of the Electric Kettle with SimaPro Software***
GEOMATICS AND ENVIRONMENTAL ENGINEERING Volume 5 Number 3 2011 Katarzyna Grzesik*, Kinga Guca** Screening Study of Life Cycle Assessment (LCA) of the Electric Kettle with SimaPro Software*** 1. Introduction
More informationEnvironmental Product Declaration
Environmental Product Declaration Large Distribution Transformer 16/20 MVA (/) CERTIFIED ENVIRONMENTAL PRODUCT DECLARATION S-P-00056 http://www.environdec.com T&D S.p.A. Unità operativa Trasformatori di
More informationBASF Scope 3 GHG Inventory Report
In alignment with the GHG Protocol Corporate Value Chain (Scope 3) Accounting and Reporting Standard and the Guidance for Accounting and Reporting Corporate GHG Emissions in the Chemical Sector Value Chain
More informationTechno-economic and ecological evaluation of a wood biorefinery
Techno-economic and ecological evaluation of a wood biorefinery Martina Haase 1, Magnus Fröhling 1, Jörg Schweinle 2, Birgit Himmelreich 3 1) Industrial Production, Universität Karlsruhe (TH) 2) Johann
More informationLife Cycle Assessment of Polymers in an Automotive Bolster
Life Cycle Assessment of Polymers in an Automotive for American Chemistry Council by PE INTERNATIONAL, Inc. April 23, 2012 Contact: Christoph Koffler Margaret Zahller PE INTERNATIONAL, Inc. 344 Boylston
More informationPortfolio Manager and Green Power Tracking
Building owners and operators can buy green power products as a way of reducing the environmental impacts associated with purchased electricity use in their facilities. The Environmental Protection Agency
More informationSustainable Manufacturing Seminar. Designing to Sustain the Economy, Environment and Society. Sustainable Product Standards (case-study)
Sustainable Manufacturing Seminar Designing to Sustain the Economy, Environment and Society Sustainable Product Standards (case-study) The Eco-efficiency Evaluation of BASF s Greenville Thermal Oxidizer
More informationSMaRT. Environmental Product Declaration (EPD) Policy & Product Criteria Rule (PCR) Approved March 28, 2011 Amended March 28, 2012
1511 Wisconsin Avenue, NW Washington, DC 20007 Telephone 202-338-3131 Email MTS@sustainableproducts.com Web http://mts.sustainableproducts.com SMaRT Environmental Product Declaration (EPD) Policy & Product
More informationVergleich von Energieaufwendungen und Umweltbelastungen von PV-Anlagen mit konventionellen Kraftwerken
Vergleich von Energieaufwendungen und Umweltbelastungen von PV-Anlagen mit konventionellen Kraftwerken Dr. Niels Jungbluth jungbluth@esu-services.ch www.esu-services.ch ESU-services, Uster, Switzerland
More informationLCA of recycled concrete: Environmentally superior to virgin concrete?
HO CHS CHULE F ÜR T E CHNI K RAPPERSW IL I BU INS T I T UT F ÜR BAU UND UM W EL T avnir 2013 Nov 5 th : LCA of recycled concrete: Environmentally superior to virgin concrete? 1. Why such a study, and how?
More informationWhite Paper Life Cycle Assessment and Product Carbon Footprint
White Paper Life Cycle Assessment and Product Carbon Footprint Fujitsu ESPRIMO E9900 Desktop PC Climate change is one of the most important global challenges that society of the 21st century faces. According
More informationIDENTIFICATION OF KEY ENVIRONMENTAL ISSUES FOR BUILDING MATERIALS
IDENTIFICATION OF KEY ENVIRONMENTAL ISSUES FOR BUILDING MATERIALS Seongwon Seo 1, Selwyn N. Tucker 1 and Delwyn G. Jones 2 Abstract Manufacture, construction and use of buildings and building materials
More informationA Comparative Life Cycle Assessment of Canadian Hardwood Flooring with Alternative Flooring Types. Acknowledgements
Acknowledgements This project is part of a research initiative designed to enhance the competitiveness of the hardwood industry in eastern Canada. Project funding was provided by Natural Resources Canada's
More informationResearcH JournaL 2010 / VOL 02.01. www.perkinswill.com
ResearcH JournaL 21 / VOL 2.1 www.perkinswill.com Comparative Analysis of Flooring Materials 4. COMPARATIVE ANALYSIS OF FLOORING MATERIALS: Environmental and Economic Performance Ajla Aksamija, Ph.D.,
More informationCOMPARATIVE PRODUCT LIFECYCLE ASSESSMENT NIKE, Inc. Product Comparisons
COMPARATIVE PRODUCT LIFECYCLE ASSESSMENT NIKE, Inc. Product Comparisons A footprint includes many different kinds of impacts that must be measured through the scientific evaluation of all processes and
More informationLIFE CYCLE IMPACTS OF ALKALINE BATTERIES WITH A
LIFE CYCLE IMPACTS OF ALKALINE BATTERIES WITH A FOCUS ON END OF LIFE A STUDY CONDUCTED FOR THE NATIONAL ELECTRICAL MANUFACTURERS ASSOCIATION Draft release to internal group: June 2010 External review:
More informationGE Healthcare Life Sciences. An environmental life cycle assessment comparison of single-use and conventional bioprocessing technology
GE Healthcare Life Sciences An environmental life cycle assessment comparison of single-use and conventional bioprocessing technology An environmental life cycle assessment comparison of single-use and
More informationDECLARATION OF RAW AND MELAMINE FACED WOOD PARTICLEBOARD. SAIB S.p.A.
EPDR ENVIRONMENTAL PRODUCT DECLARATION SAIB EPD-2006-Rev.1.1 Registration number: Updating of S-P-00068 Validity time: 17/04/2011 ENVIRONMENTAL PRODUCT DECLARATION OF RAW AND MELAMINE FACED WOOD PARTICLEBOARD
More informationLife Cycle Assessment and Forest Products: A White Paper
Life Cycle Assessment and Forest Products: A White Paper September 2010 Life Cycle Assessment and Forest Products: A White Paper Table of Contents Executive Summary... 2 What is LCA?... 3 A Standardized,
More informationGHG Protocol Product and Supply Chain Initiative. Proposed List of Technical Topics
Page 1 World Business Council for Sustainable Development GHG Protocol Product and Supply Chain Initiative Proposed List of Technical Topics Seven technical working groups have been established to develop
More informationAP ENVIRONMENTAL SCIENCE 2009 SCORING GUIDELINES
AP ENVIRONMENTAL SCIENCE 2009 SCORING GUIDELINES Question 2 (a) Describe the steps by which methane produced in the digester can be used to generate electricity. Two points can be earned: 1 point for stating
More informationAP ENVIRONMENTAL SCIENCE 2012 SCORING GUIDELINES
AP ENVIRONMENTAL SCIENCE 2012 SCORING GUIDELINES Question1 Read the following article from the Fremont Gazette and answer the questions that follow. (a) Identify and describe TWO water-related environmental
More information