DECLARATION OF RAW AND MELAMINE FACED WOOD PARTICLEBOARD. SAIB S.p.A.

Transcription

1 EPDR ENVIRONMENTAL PRODUCT DECLARATION SAIB EPD-2006-Rev.1.1 Registration number: Updating of S-P Validity time: 17/04/2011 ENVIRONMENTAL PRODUCT DECLARATION OF RAW AND MELAMINE FACED WOOD PARTICLEBOARD SAIB S.p.A. Via Caorsana 5/A Fossadello di Caorso (PC) Italy Tel / Fax /

2 List of content 1. Description of the Company and the product 1.1. The company 1.2. The product 2. Environmental Performance 2.1. Resources 2.2. Pollutant emissions 2.3. Waste 2.4. Other environmental information 2.5. Recycling declaration 3. Information from the company and the certification body 3.1. Information from the company 3.2. Information form the certification boby References 1. Description of the Company and the product 1.1 The company Since 1962, SAIB S.p.A. has offered the Italian and foreign markets raw and melamine faced particleboard panels to an ever increasing number of clients. From 30 m 3 of chipboard products per day in the first year of business, today SAIB exceeds 1500 m 3 per day, with an ever increasing turnover. The total area of the factory is square meters, of which are covered. Inside these covered areas are two production lines for the processing of raw particleboard (of which one line is Siempelkamp Contiroll) and three melaminazing production lines which allow to melamine different sizes chipboards till a maximum length of 5.90 meters. In 1999 SAIB S.p.A. received the prize ERA (Emilia Romagna for the Environment) and in 2000 the certificate from Certiquality that guarantee that SAIB S.p.A. use exclusively recovered wood for the production of its Raw and Melamine faced wood particleboard. The company has implemented and maintains Quality, Environmental, Occupational Health and Safety Management Systems which fulfil the requirements of the following standards: ISO 9001:2000, ISO 14001:04, OHSAS 18001:1999 (issued on May 2006). More information about the company on the Internet:

3 1.1 The product According to EN 309 standard the wood particleboard can be described as follow: - manufacturing methods: pressed; - surface coating: raw melamined faced chipboards; - form: flat; - characteristics of the particles (dimension and form): wood particleboard; - structure of the panel and use: stratified, for internal furniture. Range of thickness (mm) Density of raw particleboards (kg/m 3 ) Tab. 1 Produced particleboards Dried wood content 85,00 % Dried glue content 8,50 % Moisture content 5<UR<9 % Density of coating material (g/m 2 ) 75 ± 20% The Free formaldehyde content, according to EN 120 standard, is 8 mg / 100 gr ( Class E1 ). The contaminants of the recycled wood used for manufacturing have been measured according to the European Panel Federation industry standard The use of recycled wood for wood-based panels, in Annex 2 of the document Industry Standard WPIF/UKFPA/ Code of practice for the application of wood chain of custody criteria to product environmental labelling in the saw-milling and wood panel-board sectors (November 1999).

4 Raw Material Tab. 2 Contaminants of recycled wood Elements and compounds Measured value (mg/kg dry panel) Limit value (mg/kg dry panel) Arsenic Cadmium Chromium Copper Lead Mercury < Fluorine Chlorine Pentachlorophenol (PCP) < Creosote Benzo(a) pyrene < The wood used in the production of wood particleboard is made up primarily from sawmills processing discards or from qualified suppliers specialised collection centers, that select only some material typologies, as for example pallets or fruit crates. Green Material Processing The wood undergoes the first phase of refining. The purification and separation of foreign elements from the wood (metals and other materials) takes place through the use of magnets and grading separators that take advantage of the actual materials weight differences. Dry wood processing This phase is determining in order to continuously supply the processing plants with top quality raw materials. Highly qualified staff are backed by instruments and sophisticated equipment to test all raw wood material processing phases. After the humidity contained in the shavings is eliminated by means of a drying process, the purification, refining and sieving processes are intensified. In this phase the shavings are separated according to sizes separately stocking in silos the fine material and the average size material which are be used to create respectively the external and internal layers of the chipboard panels. Formation phase of the MAT The dried raw material is ready to be transformed into wood particleboard. Most of the chipboard processing takes place on a continuous SIEMPELKAMP Contiroll plant, which represents SAIB technological innovation apex. SAIB today is able to assure to its customers a "modular" product which on the basis of the orders varies in length, from 244 to 580cm, in width from 183 to 220cm and in the thickness which can be made from 6 to 40 mm. The dried material is glued with urea resins, it is important to note that all adhesives used by SAIB allow to obtain an E1 quality product. At this point the already glued material enters the formation belt which distributes it, thereby creating a uniform material MAT that after a final conformity check as to the qualitative parameters set, enters the press to exit in the shape of a raw wood particleboard.

5 2. Environmental Performance SAIB S.p.A. continuously monitors the environmental performance of its product. The scientific basis for the quantification of potential environmental impacts is the Life Cycle Assessment (LCA) methodology. The impact assessment results of the LCA study are declared in the EPD document and offer a objective and reliable way for environmental communication. Data used for the LCA study are continuously monitored and updated according to an internal follow-up procedure. The present EPD is the third version and the underlying LCA data have been significantly improved: not only the in-situ collected data have been updated but also more updated versions of secondary data have been applied (such as data about the production of materials and energy sources consumed by SAIB S.p.A. and its suppliers). Because of this updating procedure, significant variations occurs in some values declared in the EPD document. These variations are caused mainly by the availability of more precise, detailed and compete secondary data. Information about the environmental performance refers to 1 m 3 of particleboard with 18 mm of panel thickness, which is the functional unit. Specific data were collected on the plant referring to the 12 months of year All production and transport processes from the extraction of raw materials to the manufacturing of the final product were included into the system boundaries. Explanation of the main life-cycle phases: - Wood: Production of wooden materials, - Glue: Production of glue - Coat.: Production of coating, - Trans.: Transport to manufacturer; - Part.: Manufacturing of particleboard. 2.1 Resources Tab. 3 Resources consumption for 1 m 3 of particleboard with 18 mm of panel thickness Unit TOTAL Wood Glue Coat. Trans. Part. Non-renewable resources without energy content kg 5,83 1,94 1,20 0,31 0,06 2,33 with energy content MJ Renewable resources * without energy content kg with energy content MJ Electricity consumption kwh (*) Resourse consumption of biological tree growth is not inlcuded (597 kg CO 2, 345 kg H 2O and 6206 MJ solar energy).

6 Water consumptions are included in renewable resources (except cooling water). 2.2 Pollutant emissions Tab. 5 Pollutant emissions for 1 m 3 of particleboard with 18 mm of panel thickness Global warming potential kg CO 2 equivalents Stratosferic ozone kg CFC 11 depletion equivalents Acidification mol H+ equivalents Photochemical kg ethene ozone formation equivalents Eutrophication kg O 2 equivalents Unit TOTAL Wood Glue Coat. Trans. Part , , , , , , ,4 10,3 7,4 0,8 2,7 25,2 0,082 0,037 0,017 0,002 0,003 0,024 18,7 1,7 2,4 0,5 0,7 13,5 2.3 Waste Tab. 6 Waste generation for 1 m3 of particleboard with 18 mm of panel thickness Unit TOTAL Wood Glue Coat. Trans. Part. Hazardous waste kg 0,62 0,03 0,47 0,06 0,00 0,07 Other waste kg 12,4 7,3 0,3 0,1 0,0 4,7 2.4 Other environmental information Usage and maintenance It is recommended to avoid the usage of organic detergents for the cleaning of the wood panel surface in order to reduce the emissions of Volatile Organic Compounds (VOC) to air. Energy content Energy content of wood particleboard is Kcal/kg. 2.5 Recycling declaration Final products where raw and melamin faced particleboards, produced by SAIB S.p.A., have been utilised as components (such as furniture products) should be disassembled. Raw and melamin faced particleboard parts shall be sent to recovery and, thanks to their characteristics, can be recycled in wood particleboard production processes of SAIB S.p.A.

7 3. Information from the company and the certification body 3.1 Information from the company Product Specific Requirements for Wood particleboard have been prepared by SAIB S.p.A. with the support of FEBE ECOLOGIC ( FEBE ECOLOGIC prepared the LCA study. This EPD is published on the Swedish Environmental Management Council web site ( which is the most indicate source for further information. Contact person for the EPD: Giuseppe Conti SAIB S.p.A. Ph: Information from the certification body This EPD and relative Life Cycle assessment study have been approved by Certiquality in accordance with MSR 1999:2 standard provided by Swedish Environmental Management Council. References: The EPD refers to: - Requirements for Environmental Product Declarations, EPD, (MSR 1999:2) published by the Swedish Environmental Management Council at - Requirements for an International EPD Scheme managed by INTEND project The PSR document: (PSR) for preparing an environmental product declaration (EPD) for Wood particleboards. PSR 2003:8 ( - The LCA report produced by FEBE ECOLOGIC ( B. Sára, E. Scimìa: Valutazione del Ciclo di Vita del pannello di particelle di SAIB S.p.A. per ottenimento EPD, Maggio The updating document of the LCA report: Documento d'integrazione allo studio LCA - Valutazione del Ciclo di Vita del pannello di particelle di SAIB S.p.A. per ottenimento EPD, Luglio 2006

8 - The updating document of the LCA report: Documento d'integrazione allo studio LCA - Valutazione del Ciclo di Vita del pannello di particelle di SAIB S.p.A. per ottenimento EPD, Ottobre 2007