Metallized Polyester PCMT 365/366/367 film capacitors
|
|
|
- Buck Quinn
- 7 years ago
- Views:
Transcription
1 Metallized Polyester PCMT 365/366/367 MKT RADIAL LACQUERED CAPACITORS (Dipped Type) - Orange Pitch 5.0/7.5mm QUICK REFERENCE DATA acitance range (E12 series) to 1.0μF acitance tolerance, Rated voltage V Rdc 63 V, 100 V, 250 V, 400 V, 630V Rated voltage V Rac 40 V, 63 V, 160 V, 220 V, 250V Climatic category 55/105/56 Temperature range -55 ~ +105 Reference specification IEC Performance grade Grade 1 (long life) Coating material Qualified in accordance with UL94V-0 FEATURES APPLICATIONS. Low inductive wound cell of metallized (PETP) film. Cell protected by epoxy lacquer. Radial leads of tin coated wire. Withstand to solvents and rinsing liquids. Blocking and coupling. Bypass and energy reservoir application Please refer to caution and warning at before using these products. 41
2 Metallized Polyester PCMT 365/366/367 Ordering Information l l l b h h h H 0 lt l t P P A=1.7±0.3 P d t P o < 365 > < 366 > < 367 > PCMT XXX X X XXX Type Series acitance Code l max Voltage 1 63V 2 100V V 5 400V 6 630V 7 63V V Series Available versions Product(l max ) Packing Lead length & Hole to hole Code Method Height ( P o ) Pitch (P) 1 Taped on reel H 0 = 16mm 12.7mm Taped on reel ± 5% H 0 = 16mm 12.7mm Ammopack H 0 = 16mm 12.7mm Ammopack ± 5% H 0 = 16mm 12.7mm Loose in box lt = 17±4mm Loose in box ± 5% lt = 17±4mm Loose in box lt = 4+1/-0.5mm Loose in box ± 5% lt = 4+1/-0.5mm Loose in box lt = 22±4mm Loose in box ± 5% lt = 22±4mm Loose in box lt = 4+1/-0.5mm Loose in box ± 5% lt = 4+1/-0.5mm
3 Metallized Polyester PCMT 365/366/367 Packing Information SERIES 365 SMALLEST PACKAGING QUANTITIES (SPQ) reel ammopack DIMENSIONS SPQ SPQ 3.5 x 12.5 x x 13.0 x x 13.5 x x 14.0 x x 14.5 x x 15.0 x x 15.5 x x 13.5 x x 15.0 x x 14.0 x x 14.0 x x 15.5 x x 14.5 x x 14.5 x x 16.0 x x 15.0 x x 15.0 x x 16.5 x x 15.5 x x 15.5 x x 16.5 x x 17.0 x SERIES SMALLEST PACKAGING QUANTITIES (SPQ) lt = 17±4mm lt = 4+1/-0.5mm DIMENSIONS SPQ SPQ 366 All dimensions SERIES SMALLEST PACKAGING QUANTITIES (SPQ) lt = 22±4mm lt = 4+1/-0.5mm DIMENSIONS SPQ SPQ 367 All dimensions 43
4 Metallized Polyester PCMT 365 V Rdc = 63 V V Rac = 40 V ~ taped versions PCMT taped on reel ammopack H = 16 mm H = 16 mm Pitch = 5.08 ± 0.3 mm dt = 0.5 mm ( / ) x 12.5 x x 13.0 x x 13.5 x x 14.0 x x 14.5 x x 15.5 x x 14.0 x x 14.5 x x 15.0 x x 15.5 x SPECIFIC REFERENCE DATA FOR THE 63V DC CAPACITORS 0.1μF <C 0.47μF μF<C 1.0μF Rated voltage pulse slope(dv/dt) R at 63V (DC) R between leads at 10V, for C 0.33 μf RC between leads at 10V, for C > 0.33 μf Withstanding voltage DC (cut off current 10mA) ;rise time 100 V/s 110 V/ μs > MΩ > s 100V ; 1min 44
5 Metallized Polyester PCMT 365 V Rdc = 100 V V Rac = 63 V ~ taped versions PCMT taped on reel H = 16 mm Pitch = 5.08 ± 0.3 mm dt = 0.5 mm ( / ) 3.5 x 12.5 x x 13.0 x ammopack H = 16 mm SPECIFIC REFERENCE DATA FOR THE 100V DC CAPACITORS 0.1μF < C 0.27μF Rated voltage pulse slope(dv/dt) R at 100V (DC) R between leads at 100V, for C 0.33 μf Withstanding voltage DC (cut off current 10mA) ;rise time 100 V/s 110 V/ μs > MΩ 160V ; 1min 45
6 Metallized Polyester PCMT 365 V Rdc = 63 V V Rac = 40 V ~ taped versions PCMT taped on reel H = 16 mm Pitch = 5.08 ± 0.3 mm dt = 0.5 mm ( / ) 4.0 x 13.5 x ammopack H = 16 mm x 14.0 x x 14.5 x x 15.0 x SPECIFIC REFERENCE DATA FOR THE 63V DC CAPACITORS 0.1μF <C 0.47μF μF<C 1.0μF Rated voltage pulse slope(dv/dt) R at 63V (DC) R between leads at 10V, for C 0.33 μf RC between leads at 10V, for C > 0.33 μf Withstanding voltage DC (cut off current 10mA) ;rise time 100 V/s 18 V/ μs > MΩ > s 100V ; 1min 46
7 Metallized Polyester PCMT 365 V Rdc = 100 V V Rac = 63 V ~ taped versions PCMT taped on reel H = 16 mm Pitch = 5.08 ± 0.3 mm dt = 0.5 mm ( / ) ammopack H = 16 mm x 13.5 x x 14.0 x x 14.5 x x 15.0 x x 15.5 x SPECIFIC REFERENCE DATA FOR THE 100V DC CAPACITORS 0.1μF < C 0.47μF Rated voltage pulse slope(dv/dt) R at 100V (DC) R between leads at 100V, for C 0.33 μf RC between leads at 100V, for C > 0.33 μf Withstanding voltage DC (cut off current 10mA) ;rise time 100 V/s 36 V/ μs > MΩ > s 160V ; 1min 47
8 Metallized Polyester PCMT 365 V Rdc = 250 V V Rac = 160 V ~ taped versions PCMT taped on reel H = 16 mm Pitch = 5.08 ± 0.3 mm dt = 0.5 mm ( / ) 4.0 x 13.5 x ammopack H = 16 mm x 14.5 x x 15.0 x x 15.5 x SPECIFIC REFERENCE DATA FOR THE 250V DC CAPACITORS 0.1μF < C 0.47μF Rated voltage pulse slope(dv/dt) R at 250V (DC) R between leads at 100V, for C 0.33 μf Withstanding voltage DC (cut off current 10mA) ;rise time 100 V/s 70 V/ μs 400V ; 1min 48
9 Metallized Polyester PCMT 365 V Rdc = 400 V V Rac = 220 V ~ taped versions PCMT taped on reel H = 16 mm Pitch = 5.08 ± 0.3 mm dt = 0.5 mm ( / ) ammopack H = 16 mm x 13.5 x x 15.0 x x 15.5 x x 16.0 x x 16.5 x x 16.5 x x 17.0 x SPECIFIC REFERENCE DATA FOR THE 400V DC CAPACITORS Rated voltage pulse slope(dv/dt) R at 400V (DC) R between leads at 100V, for C 0.33μF R between interconnected leads and casing;100v ; 1min Withstanding voltage DC ( cut off current 10mA) ;rise time 100 V/s 110 V/ μs 640V ; 1min 49
10 Metallized Polyester PCMT 365 V Rdc = 630 V V Rac = 250 V ~ taped versions PCMT taped on reel H = 16 mm ammopack H = 16 mm Pitch = 5.08 ± 0.3 mm dt = 0.5 mm ( / ) x 14.5 x x 15.0 x x 15.5 x SPECIFIC REFERENCE DATA FOR THE 630V DC CAPACITORS Rated voltage pulse slope(dv/dt) R at 630V (DC) R between leads at 100V, for C 0.33μF R between interconnected leads and casing;100v ; 1min Withstanding voltage DC ( cut off current 10mA) ;rise time 100 V/s 110 V/ μs 1008V ; 1min 50
11 Metallized Polyester PCMT 366 V Rdc = 63 V V Rac = 40 V ~ loose in box PCMT lt = 17 ± 4 mm loose in box lt = 4 +1/-0.5 mm Pitch = 5.08 ± 0.3 mm dt = 0.5 mm ( / ) x 12.5 x x 13.0 x x 13.5 x x 14.0 x x 14.5 x x 15.5 x x 14.0 x x 14.5 x x 15.0 x x 15.5 x SPECIFIC REFERENCE DATA FOR THE 63V DC CAPACITORS 0.1μF <C 0.47μF μF<C 1.0μF Rated voltage pulse slope(dv/dt) R at 63V (DC) R between leads at 10V, for C 0.33 μf RC between leads at 10V, for C > 0.33 μf Withstanding voltage DC (cut off current 10mA) ;rise time 100 V/s 110 V/ μs > MΩ > s 100V ; 1min 51
12 Metallized Polyester PCMT 366 V Rdc = 100 V V Rac = 63 V ~ loose in box PCMT loose in box lt = 17 ± 4 mm lt = 4 +1/-0.5 mm Pitch = 5.08 ± 0.3 mm dt = 0.5 mm ( / ) 3.5 x 12.5 x x 13.0 x SPECIFIC REFERENCE DATA FOR THE 100V DC CAPACITORS 0.1μF < C 0.27μF Rated voltage pulse slope(dv/dt) R at 100V (DC) R between leads at 100V, for C 0.33 μf Withstanding voltage DC (cut off current 10mA) ;rise time 100 V/s 110 V/ μs > MΩ 160V ; 1min 52
13 Metallized Polyester PCMT 366 V Rdc = 63 V V Rac = 40 V ~ loose in box PCMT loose in box lt = 17 ± 4 mm lt = 4 +1/-0.5 mm Pitch = 7.62 ± 0.3 mm dt = 0.5 mm ( / ) 4.0 x 12.0 x x 13.0 x x 13.5 x x 14.0 x x 14.5 x SPECIFIC REFERENCE DATA FOR THE 63V DC CAPACITORS 0.1μF < C 0.47μF μF< C 1.0μF Rated voltage pulse slope(dv/dt) R at 63V (DC) R between leads at 10V, for C 0.33 μf RC between leads at 10V, for C > 0.33 μf Withstanding voltage DC (cut off current 10mA) ;rise time 100 V/s 18 V/ μs > MΩ > s 100V ; 1min 53
14 Metallized Polyester PCMT 366 V Rdc = 100 V V Rac = 63 V ~ loose in box PCMT loose in box lt = 17 ± 4 mm lt = 4 +1/-0.5 mm Pitch = 7.62 ± 0.3 mm dt = 0.5 mm ( / ) 4.0 x 12.0 x x 13.0 x x 13.0 x x 13.0 x x 13.5 x x 13.5 x x 14.5 x x 15.0 x SPECIFIC REFERENCE DATA FOR THE 100V DC CAPACITORS 0.1μF < C 0.47μF Rated voltage pulse slope(dv/dt) R at 100V (DC) R between leads at 100V, for C 0.33 μf RC between leads at 100V, for C > 0.33 μf Withstanding voltage DC (cut off current 10mA) ;rise time 100 V/s 36 V/ μs > MΩ > s 160V ; 1min 54
15 Metallized Polyester PCMT 366 V Rdc = 250 V V Rac = 160 V ~ loose in box PCMT loose in box lt = 17 ± 4 mm lt = 4 +1/-0.5 mm Pitch = 7.62 ± 0.3 mm dt = 0.5 mm ( / ) 4.0 x 13.0 x x 14.0 x x 15.0 x x 15.5 x SPECIFIC REFERENCE DATA FOR THE 250V DC CAPACITORS 0.1μF < C 0.47μF Rated voltage pulse slope(dv/dt) R at 250V (DC) R between leads at 100V, for C 0.33μF R between interconnected leads and casing;100v ; 1min Withstanding voltage DC (cut off current 10mA) ;rise time 100 V/s 70 V/ μs 400V ; 1min 55
16 Metallized Polyester PCMT 366 V Rdc = 400 V V Rac = 220 V ~ loose in box PCMT loose in box lt = 17 ± 4 mm lt = 4 +1/-0.5 mm Pitch = 7.62 ± 0.3 mm dt = 0.5 mm ( / ) 4.0 x 13.0 x x 15.0 x x 15.5 x x 16.0 x x 16.5 x x 16.5 x x 17.0 x x 17.0 x SPECIFIC REFERENCE DATA FOR THE 400V DC CAPACITORS Rated voltage pulse slope(dv/dt) R at 400V (DC) R between leads at 100V, for C 0.33 μf Withstanding voltage DC ( cut off current 10mA) ;rise time 100 V/s 110 V/ μs 640V ; 1min 56
17 Metallized Polyester PCMT 366 V Rdc = 630 V V Rac = 250 V ~ loose in box PCMT loose in box lt = 17 ± 4 mm lt = 4 +1/-0.5 mm Pitch = 7.62 ± 0.3 mm dt = 0.5 mm ( / ) x 14.5 x x 15.0 x x 15.5 x SPECIFIC REFERENCE DATA FOR THE 630V DC CAPACITORS Rated voltage pulse slope(dv/dt) R at 630V (DC) R between leads at 100V, for C 0.33μF R between interconnected leads and casing;100v ; 1min Withstanding voltage DC ( cut off current 10mA) ;rise time 100 V/s 110 V/ μs 1008V ; 1min 57
18 Metallized Polyester PCMT 367 V Rdc = 63 V V Rac = 40 V ~ loose in box PCMT loose in box lt = 22 ± 4 mm lt = 4 +1/-0.5 mm Pitch = 5.08 ± 0.3 mm dt = 0.5 mm ( / ) x 7.5 x x 8.0 x x 8.5 x x 9.0 x x 9.5 x x 10.5 x x 11.5 x x 10.0 x x 10.5 x x 11.0 x x 11.5 x SPECIFIC REFERENCE DATA FOR THE 63V DC CAPACITORS 0.1μF < C 0.47μF μF< C 1.0μF Rated voltage pulse slope(dv/dt) R at 63V (DC) R between leads at 10V, for C 0.33 μf RC between leads at 10V, for C > 0.33 μf Withstanding voltage DC (cut off current 10mA) ;rise time 100 V/s 110 V/ μs > MΩ > s 100V ; 1min 58
19 Metallized Polyester PCMT 367 V Rdc = 100 V V Rac = 63 V ~ loose in box PCMT loose in box lt = 22 ± 4 mm lt = 4 +1/-0.5 mm Pitch = 5.08 ± 0.3 mm dt = 0.5 mm ( / ) 3.5 x 7.5 x x 8.0 x SPECIFIC REFERENCE DATA FOR THE 100V DC CAPACITORS 0.1μF < C 0.27μF Rated voltage pulse slope(dv/dt) R at 100V (DC) R between leads at 100V, for C 0.33 μf Withstanding voltage DC (cut off current 10mA) ;rise time 100 V/s 110 V/ μs > MΩ 160V ; 1min 59
20 Metallized Polyester PCMT 367 V Rdc = 63 V V Rac = 40 V ~ loose in box PCMT loose in box lt = 22 ± 4 mm lt = 4 +1/-0.5 mm Pitch = 7.62 ± 0.3 mm dt = 0.5 mm ( / ) 4.0 x 8.0 x x 8.5 x x 9.0 x x 9.5 x x 10.0 x SPECIFIC REFERENCE DATA FOR THE 63V DC CAPACITORS 0.1μF < C 0.47μF μF< C 1.0μF Rated voltage pulse slope(dv/dt) R at 63V (DC) R between leads at 10V, for C 0.33 μf RC between leads at 10V, for C > 0.33 μf Withstanding voltage DC (cut off current 10mA) ;rise time 100 V/s 18 V/ μs > MΩ > s 100V ; 1min 60
21 Metallized Polyester PCMT 367 V Rdc = 100 V V Rac = 63 V ~ loose in box PCMT loose in box lt = 22 ± 4 mm lt = 4 +1/-0.5 mm Pitch = 7.62 ± 0.3 mm dt = 0.5 mm ( / ) 4.0 x 8.0 x x 8.5 x x 9.0 x x 9.5 x x 10.0 x x 10.5 x SPECIFIC REFERENCE DATA FOR THE 100V DC CAPACITORS 0.1μF < C 0.47μF Rated voltage pulse slope(dv/dt) R at 100V (DC) R between leads at 100V, for C 0.33 μf RC between leads at 100V, for C > 0.33 μf Withstanding voltage DC (cut off current 10mA) ;rise time 100 V/s 36 V/ μs > MΩ > s 160V ; 1min 61
22 Metallized Polyester PCMT 367 V Rdc = 250 V V Rac = 160 V ~ loose in box PCMT loose in box lt = 22 ± 4 mm lt = 4 +1/-0.5 mm Pitch = 7.62 ± 0.3 mm dt = 0.5 mm ( / ) 4.0 x 8.5 x x 9.5 x x 10.0 x x 11.5 x SPECIFIC REFERENCE DATA FOR THE 250V DC CAPACITORS 0.1μF < C 0.47μF Rated voltage pulse slope(dv/dt) R at 250V (DC) R between leads at 100V, for C 0.33 μf Withstanding voltage DC (cut off current 10mA) ;rise time 100 V/s 70 V/ μs 400V ; 1min 62
23 Metallized Polyester PCMT 367 V Rdc = 400 V V Rac = 220 V ~ loose in box PCMT loose in box lt = 22 ± 4 mm lt = 4 +1/-0.5 mm Pitch = 7.62 ± 0.3 mm dt = 0.5 mm ( / ) 4.0 x 8.5 x x 10.0 x x 10.5 x x 11.0 x x 11.5 x x 11.5 x x 12.0 x x 12.0 x SPECIFIC REFERENCE DATA FOR THE 400V DC CAPACITORS Rated voltage pulse slope(dv/dt) R at 400V (DC) R between leads at 100V, for C 0.33 μf Withstanding voltage DC ( cut off current 10mA) ;rise time 100 V/s 110 V/ μs 640V ; 1min 63
24 Metallized Polyester PCMT 367 V Rdc = 630 V V Rac = 250 V ~ loose in box PCMT loose in box lt = 22 ± 4 mm lt = 4 +1/-0.5 mm Pitch = 7.62 ± 0.3 mm dt = 0.5 mm ( / ) x 9.5 x x 10.0 x x 10.5 x SPECIFIC REFERENCE DATA FOR THE 630V DC CAPACITORS Rated voltage pulse slope(dv/dt) R at 630V (DC) R between leads at 100V, for C 0.33μF R between interconnected leads and casing;100v ; 1min Withstanding voltage DC ( cut off current 10mA) ;rise time 100 V/s 110V/ μs 1008V ; 1min 64
25 Metallized Polyester PCMT 365/366/367 MOUNTING NORMAL USE The capacitors are designed for mounting on printed-circuit boards. The capacitors packed in bandoliers are designed for mounting on printed-circuit boards by means of automatic insertion machines. For detailed specifications refer to Chapter " PACKAGING " SPECIFIC METHOD OF MOUNTING TO WITHSTAND VIBRATIONAND SHOCK In order to withstand vibration and shock tests, it must be ensured that the underside of the kinks are in good contact with the printed-circuit. The capacitors shall be mechanically fixed by the leads STORAGE TEMPERATURE. Storage temperature : T stg = - 25 to + 40 with RH maximum 80% without condensation. RATINGS AND CHARACTERISTICS specified all electrical values apply at an ambient temperature of 23±1, an atmospheric pressure of 86 to 106 kpa and a relative humidity of 50±2%. For reference testing, a conditioning period shall be applied of 96±4 hours by heating the products in a circulating air oven at the rated temperature and a relative humidity not exceeding 20%. 65
26 Metallized Polyester PCMT 365/366/367 THE GRAPHS OF CHARACTERISTICS 3 C/C (%) dissipation factor ( 10-4 ) Tamb( ) f(hz) acitance as fuction of ambient free air temperature : typical curve Tangent of loss angle as a function of frequency : typical curve 10 5 RC(S) 2 C/C (%) Tamb( ) f(hz) RC-product as a function of ambient free air temperature : typical curve acitance as a function of frequency : typical curve 1.2 factor Tamb( ) Multiplying factor for DC and AC voltage as a function of temperature 66
27 Metallized Polyester PCMT 365/366/367 MAXIMUM RMS (63V, 100V, 250V) VOLTAGE (SINEWAVE) AS A FUNCTION OF FREQUENCY 10 2 AC voltage (V) 10 2 AC voltage (V) 47nF nf 470 nf nF 220 nf 470 nf f(hz) f(hz) 10 5 AC voltage (RMS value) as a function of frequency at T amb 85 for V Rdc =63V AC voltage (RMS value) as a function of frequency at 85 <T amb 105 for V Rdc =63V AC voltage (V) nf 47 nf 100 nf 470 nf AC voltage (V) nf 47 nf 100 nf 470 nf f(hz) f(hz) 10 5 AC voltage (RMS value) as a function of frequency at T amb 85 for V Rdc =100V AC voltage (RMS value) as a function of frequency at 85 <T amb 105 for V Rdc =100V AC voltage (V) AC voltage (V) nf 47 nf 100 nf 150 nf nf 47 nf 100 nf 150 nf f(hz) f(hz) 10 5 AC voltage (RMS value) as a function of frequency at T amb 85 for V Rdc =250V AC voltage (RMS value) as a function of frequency at 85 <T amb 105 for V Rdc =250V 67
28 Metallized Polyester PCMT 365/366/367 MAXIMUM RMS (400V, 630V) VOLTAGE (SINEWAVE) AS A FUNCTION OF FREQUENCY 10 3 AC voltage (V) nf 15 nf 33 nf 56 nf 10 3 AC voltage (V) nf 15 nf 33 nf 56 nf f(hz) f(hz) 10 5 AC voltage (RMS value) as a function of frequency at T amb 85 for V Rdc =400V AC voltage (RMS value) as a function of frequency at 85 <T amb 105 for V Rdc =400V AC voltage (V) nf 15 nf AC voltage (V) nf 15 nf f(hz) f(hz) 10 5 AC voltage (RMS value) as a function of frequency at T amb 85 for V Rdc =630V AC voltage (RMS value) as a function of frequency at 85 <T amb 105 for V Rdc =630V 68
29 Metallized Polyester PCMT 365/366/367 APPLICATION NOTE AND LIMITING CONDITIONS To select this capacitor for a certain application, 6 conditions must be checked : 1. The peak voltage (V p ) shall not be greater than the rated DC voltage. 2. The peak-to-peak voltage (V p-p ) shall not be greater than 2 2 times the rated AC voltage to avoid the ionization inception level. 3. The peak current (I p ) shall not exceed the maximum peak current, defined as maximum voltage pulse slope (dv/dt) multiplied by the capacitance. I p max. = C (dv/dt) max Or the voltage pulse slope shall not exceed the rated voltage pulse slope. If the pulse voltage is lower than the rated voltage, the values of the table may be multiplied by V Rdc and divided by the applied voltage. 4. The dissipated power shall not be greater than the maximum permissible power dissipation stated above. 5. The free air ambient temperature for the capacitor is not exceeding the category temperature. 6. Since all metallized have an intrinsically active flammability risk, it is recommended that these capacitors should only be used in circuits where the power can be limited to less than 5W to the capacitor, should a failure occur. 69
30 Metallized Polyester PCMT 365/366/367 PRODUCT MARKING acitors with a body length 7.5 mm The capacitors are marked on the top or side in black ink with the following information :. Rated capacitance code in pf or μf. Tolerance on rated capacitance : K = ± 10 %, J = ± 5 %. Rated DC voltage Example of marking or K. 63 K 63 acitors with a body length of 10 mm or 10.5 mm The capacitors are marked on the top or side in black ink with the following information :. Rated capacitance code in pf or μf. Tolerance on rated capacitance : K = ± 10 %, J = ± 5 %. Rated DC voltage. Code for dielectric material Example of marking 0.47 K or 0.47 K 100 MKT. 100 MK 70
film capacitors QUICK REFERENCE DATA Pilkor components FEATURES APPLICATIONS 10 and 15mm 22.5 and 27.5mm
MKP RADIAL POTTED CAPACITORS Pitch 10.0/15.0/22.5/27.5/37.5mm 10 and 15mm 22.5 and 27.5mm QUICK REFERENCE DATA Capacitance range (E6 series) * Capacitance tolerance Rated (AC) voltage 50 to 60 Hz Climatic
QUICK REFERENCE DATA. Pilkor components FEATURES APPLICATIONS
MKP RADIAL POTTED CAPACITORS Pitch 10.0/15.0/22.5/27.5 mm QUICK REFERENCE DATA Capacitance range (E6 series) * 0.01μF to 3.3μF Capacitance tolerance ±10 %, ±20 % Rated (AC) voltage 50 to 60 Hz 275 V ~
DC Film Capacitors MKT Radial Potted Type
DC Film Capacitors MKT Radial Potted Type FEATURES 15 mm to 27.5 mm lead pitch. Supplied loose in box and taped on reel Material categorization: for definitions of compliance please see www.vishay.com/doc?99912
DC Film Capacitors MKT Radial Potted Type
DC Film Capacitors MKT Radial Potted Type MKT80 FEATURES AEC-Q00 qualified (rev. D) for PCM. mm (for larger available components on request) High temperature capabilities, up to 0 C Capacitance up to 60
AC and Pulse Film Foil Capacitors KP Radial Potted Type
AC and Pulse Film Foil Capacitors KP Radial Potted Type 0.5 L max. W max. Marking H max. FEATURES 5 mm lead pitch, supplied loose in box taped in ammopack or reel Material categorization: for definitions
DC Film Capacitors MKT Radial Potted Type
DC Film Capacitors MKT Radial Potted Type FEATURES 5.08 mm lead pitch Supplied loose in box, taped on ammopack or reel AEC-Q200 qualified (rev. D) Material categorization: for definitions of compliance
DC Film Capacitor MKT Radial Potted Type
MKT 370 l w FEATURES Available taped and loose in box RoHS compliant h ENCAPSULATION Flame retardant plastic case and epoxy resin (UL-class 94 V-0) P ± 0.3 Dimensions in mm l t Ø d t CLIMATIC TESTING CLASS
Interference Suppression Film Capacitors MKP Radial Potted Type
Interference Suppression Film Capacitors MKP Radial Potted Type FEATURES 7.5 mm to 27.5 mm lead pitch Supplied loose in box, taped on reel Material categorization: For definitions of compliance please
Interference Suppression Film Capacitors MKP Radial Potted Type
MKP338 6 Y2 Vishay BCcomponents Interference Suppression Film Capacitors 168x12(halfpage) l P Dimensions in mm Note (1) F - F < 0.3 mm F = 7.5 mm + 0.6 mm/- 0.1 mm APPLICATIONS For standard line bypass
High-ohmic/high-voltage resistors
FEATURES High pulse loading capability Small size. APPLICATIONS Where high resistance, high stability and high reliability at high voltage are required High humidity environment White goods Power supplies.
Metallized Polypropylene Film Capacitors DC-Link Capacitor
Metallized Polypropylene Film Capacitors DC-Link Capacitor FEATURES Slim line, low building height Very long useful life time: Up to 100 000 h at U NDC and 70 C High ripple current capability, low ESR,
High-ohmic/high-voltage resistors
FEATURES These resistors meet the safety requirements of: UL1676 (range 510 kω to 11 MΩ) EN60065 BS60065 (U.K.) NFC 92-130 (France) VDE 0860 (Germany) High pulse loading capability Small size. APPLICATIONS
Axial and Radial Leaded Multilayer Ceramic Capacitors for Automotive Applications Class 1 and Class 2, 50 V DC, 100 V DC and 200 V DC
Axial and Radial Leaded Multilayer Ceramic Capacitors for Automotive Applications Class 1 and Class 2, 5 V DC, 1 V DC and 2 V DC DESIGNING For more than 2 years Vitramon has supported the automotive industry
High Ohmic/High Voltage Metal Glaze Leaded Resistors
High Ohmic/High Voltage FEATURES A metal glazed film is deposited on a high grade ceramic body. After a helical groove has been cut in the resistive layer, tinned electrolytic copper wires are welded to
General information. Please refer to our Internet address (http://www.kemet.com) for updated information on KEMET products, services and news.
DC Film Capacitors Please refer to our Internet address (http://www.kemet.com) for updated information on KEMET products, services and news. Contents Pitch Rated Voltage Capacitance Page mm Vdc range range
AC Line Rated Ceramic Disc Capacitors Class X1, 760 V AC, Class Y1, 500 V AC
AC Line Rated Ceramic Disc Capacitors Class X1, 760 V AC, Class Y1, 500 V AC QUICK REFERENCE DATA DESCRIPTION VALUE Ceramic Class 1 2 Ceramic Dielectric U2J U2J Y5S, Y5U Y5S, Y5U Voltage (V AC ) 500 760
High Ohmic (up to 68 MΩ)/ High Voltage (up to 10 kv) Resistors
High Ohmic (up to 68 MΩ)/ A metal glazed film is deposited on a high grade ceramic body. After a helical groove has been cut in the resistive layer, tinned electrolytic copper wires are welded to the end-caps.
Aluminum Capacitors Solid Axial
SAL-A End of Life. Last Available Purchase Date is -December- Radial higher CV/volume Fig. QUICK REFERENCE DATA DESCRIPTION VALUE Maximum case size (Ø D x L in mm) 6.7 x. to.9 x. Rated capacitance range
High Ohmic/High Voltage Metal Glaze Leaded Resistors
High Ohmic/High Voltage Metal Glaze Leaded Resistors FEATURES Technology: Metal glaze A metal glazed film is deposited on a high grade ceramic body. After a helical groove has been cut in the resistive
handbook, 2 columns handbook, halfpage 085 CS
FEATURES Polarized aluminium electrolytic capacitors, non-solid, self healing Extended voltage and capacitance range SMD-version, fully moulded, insulated Flexible terminals, reflow and wave solderable
High Ohmic/High Voltage Metal Glaze Leaded Resistors
VR37 High Ohmic/High Voltage FEATURES A metal glazed film is deposited on a high grade ceramic body. After a helical groove has been cut in the resistive layer, tinned electrolytic copper wires are welded
High Ohmic/High Voltage Metal Glaze Leaded Resistors
High Ohmic/High Voltage Metal Glaze Leaded Resistors FEATURES Technology: Metal glaze A metal glazed film is deposited on a high grade ceramic body. After a helical groove has been cut in the resistive
Aluminum Electrolytic Capacitors Axial Miniature, Long-Life
Aluminum Electrolytic Capacitors Axial Miniature, Long-Life 38 AML 0 ASM smaller dimensions Fig. QUICK REFERENCE DATA DESCRIPTION Nominal case sizes (Ø D x L in mm) 6.3 x.7 to 0 x 5 VALUE 0 x 30 to x 38
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General Purpose & High Capacitance Class 2, X7R
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General Purpose & High Capacitance Class 2, 6.3 V TO 50 V 100 pf to 22 µf RoHS compliant & Halogen Free Product Specification October 13, 11 V.8 Product
High Ohmic/High Voltage Metal Film Leaded Resistors
, High Ohmic/High Voltage FEATURES Metal film technology High pulse loading (up to 10 kv) capability Small size (0207/0411) Compatible with lead (Pb)-free and lead containing soldering processes Compliant
DATA SHEET THICK FILM CHIP RESISTORS Introduction
DATA SHEET THICK FILM CHIP RESISTORS Introduction Product Specification Product specification 2 Chip Resistor Surface Mount Data in data sheets is presented - whenever possible -according to a 'format',
AC Line Rated Ceramic Disc Capacitors Class X1, 760 V AC / Class Y1, 500 V AC
4L Series AC Line Rated Ceramic Disc Capacitors Class X, 76 V AC / Class Y, 5 V AC FEATURES Complies with IEC 6384-4, 4 th edition High reliability Radial leads High capacitance up to nf Singlelayer AC
Power chip resistor size 2512 PRC221 5%; 2% FEATURES Reduced size of final equipment Low assembly costs Higher component and equipment reliability.
FEATURES Reduced size of final equipment Low assembly costs Higher component and equipment reliability. APPLICATIONS Power supplies Printers Computers Battery chargers Automotive Converters CD-ROM. QUICK
Film Capacitors SELF-HEALING
Film Capacitors FILM CAPACITORS Plastic film capacitors are generally subdivided into film/foil capacitors and metalized film capacitors. FILM/FOIL CAPACITORS Film/foil capacitors basically consist of
Automotive and Anti-Sulfuration Chip Resistor 0402
The resistors are constructed in a high grade ceramic body (aluminium oxide). Internal metal electrodes are added at each end and connected by a resistive paste that is applied to the top surface of the
Aluminum Electrolytic Capacitors Radial Miniature, Low Impedance, High Vibration Capability
Aluminum Electrolytic Capacitors Radial Miniature, Low Impedance, High Vibration Capability 048 RML 48 RUS lower longer life 36 RVI miniaturize 50 RMI high vibration FEATURES Very long useful life: 7000
High Ohmic / High Voltage Metal Glaze Leaded Resistors
High Ohmic / High Voltage Metal Glaze Leaded Resistors A metal glazed film is deposited on a high grade ceramic body. After a helical groove has been cut in the resistive layer, tinned electrolytic copper
DATA SHEET LEAD FREE CHIP RESISTORS RC_P series ±0.5%, ±1%, ±5% Sizes 0100/0201/0402/0603/0805/ 1206/1210/1218/2010/2512
DATA SHEET LEAD FREE CHIP RESISTORS RC_P series ±0.5%, ±1%, ±5% Sizes 0100/0201/0402/0603/005/ 1206/1210/121/2010/2512 Product specification August 22, 2014 V.0 Product specification 2 SCOPE This specification
DATA SHEET CHIP RESISTORS RT Series 1%; 0.5%; 0.25%; 0.1%
DATA SHEET CHIP RESISTORS Series 1%; 0.5%; 0.25%; 0.1% Product specification Supersedes Date of Sep. 30, 2003 ynsc004 ynsc015 ynsc002 ynsc007 2 SCOPE This specification describes series chip resistors
Surface Mount Multilayer Ceramic Chip Capacitor Solutions for High Voltage Applications
Surface Mount Multilayer Ceramic Chip Capacitor Solutions for High Voltage Applications ELECTRICAL SPECIFICATIONS X7R GENERAL SPECIFICATION Note Electrical characteristics at +25 C unless otherwise specified
Aluminum Electrolytic Capacitors Power Eurodin Printed Wiring
Aluminum Electrolytic Capacitors Power Eurodin Printed Wiring 00/0 PEDPW Fig. QUICK REFERENCE DATA DESCRIPTION VALUE 00 0 Nominal case size (Ø D x L in mm) x 0 to 0 x 00 Rated capacitance range 0 μf to
WR12, WR08, WR06, WR04 ±1%, ±5% Thick Film General Purpose Chip Resistors Size 1206, 0805, 0603, 0402
WR12, WR08, WR06, WR04 ±1%, ±5% Thick Film General Purpose Chip Resistors Size 1206, 0805, 0603, 0402 *Contents in this sheet are subject to change without prior notice. Page 1 of 10 ASC_WR_V23 APR.- 2015
Aluminum Electrolytic Capacitors Power Economic Printed Wiring
Aluminum Electrolytic Capacitors Power Economic Printed Wiring 0/0 PECPW 00/0 PEDPW Fig. QUICK REFERENCE DATA DESCRIPTION high ripple current 0/0 PECPW long life 0 C Nominal case size (Ø D x L in mm) Rated
WW12X, WW08X, WW06X, WW04X ±1%, ±5% Thick Film Low ohm chip resistors
WW12X, WW08X, WW06X, WW04X ±1%, ±5% Thick Film Low ohm chip resistors Size 1206, 0805, 0603, 0402 *Contents in this sheet are subject to change without prior notice. Page 1 of 8 ASC_WWxxX_V12 Nov.- 2011
Power Resistor Thick Film Technology
Power Resistor Thick Film Technology LTO series are the extension of RTO types. We used the direct ceramic mounting design (no metal tab) of our RCH power resistors applied to semiconductor packages. FEATURES
Type RP73 Series. SMD High Power Precision Resistors. Key Features. Applications. Characteristics - Electrical - RP73 Series - Standard
Key Features n High precision - tolerances down to 0.05% n Low TCR - down to 5ppm/ C n Stable high frequency performance n Operating temperature -55 C to +155 C n Increased power rating - up to 1.0W n
DATA SHEET HIGH POWER CHIP RESISTORS RC high power series 5%, 1% sizes 0603/0805/1206/2512. RoHS compliant & Halogen free
DATA SHEET HIGH POWER CHIP RESISTORS RC high power series 5%, 1% sizes 0603/005/1206/2512 RoHS compliant & Halogen free Product specification Supersedes Date of Mar. 06, 2003 Product specification 2 SCOPE
Precision Leaded Resistors
FEATURES Approved according to CECC 40101-806 Advanced thin film technology Low TC: ± 15 to Precision tolerance of value: ± 0.1 % and ± 0.25 % Superior overall : class 0.05 Wide precision range: 10 Ω to
DATA SHEET GENERAL PURPOSE CHIP RESISTORS RC0402 5%, 1% RoHS compliant & Halogen Free
DATA SHEET GENERAL PURPOSE CHIP RESISTORS 5%, 1% RoHS compliant & Halogen Free Product specification Supersedes Date of Mar. 06, 2003 Product specification 2 SCOPE This specification describes series chip
Types MC and MCN Multilayer RF Capacitors
High-Frequency, High-Power, High-Voltage Chips with Nonmagnetic Option Rugged flexibility and compatibility with FR4 boards make Type MC and MCN capacitors ideal for use where other multilayer caps aren
50 W Power Resistor, Thick Film Technology, TO-220
50 W Power Resistor, Thick Film Technology, TO-220 FEATURES 50 W at 25 C heatsink mounted Adjusted by sand trimming Leaded or surface mount versions High power to size ratio Non inductive element Material
Part Marking Instructions Chip Resistors
Chip Resistors Part Marking Instructions Part Marking Instructions Chip Resistors 1% Marking The nominal resistance is marked on the surface of the overcoating with the use of 4 digit markings. 0201 and
SUCCESS EPCOS Capacitors
SUCCESS EPCOS Inc. Capacitors Group April, 2012 EV / HV / E-Mobility Battery charger system & Inverter On Board and Off Board Assembly Trend: Wireless Charging DC/DC Converter Filtering DC Link E-Mobility
Capacitance Cap. Tol. Suffix construction. Rated voltage
Metallized Polypropylene Film Capacitors Type:ECWFE Plastic Film Capacitors Non-inductive construction using metalized Polypropylene film with flame retardant plastic case. Features Small size Excellent
DATA SHEET. TDA1510AQ 24 W BTL or 2 x 12 W stereo car radio power amplifier INTEGRATED CIRCUITS
INTEGRATED CIRCUITS DATA SHEET 24 W BTL or 2 x 12 W stereo car radio File under Integrated Circuits, IC01 January 1992 GENERAL DESCRIPTION The is a class-b integrated output amplifier encapsulated in a
3mm Photodiode,T-1 PD204-6C/L3
3mm Photodiode,T-1 Features Fast response time High photo sensitivity Small junction capacitance Pb free This product itself will remain within RoHS compliant version. Description is a high speed and high
Guidance for upgrading to GB4943.1-2011 (IEC 60950-1: 2005, MOD)
Guidance for upgrading to GB4943.1-2011 (IEC 60950-1: 2005, MOD) Note: This guidance document is a translation of official Chinese document which is issued by CQC (China Quality Certification Center) on
TC50 High Precision Power Thin Film chip resistors (RoHS compliant Halogen Free) Size 1206, 0805, 0603
WF2Q, WF08Q, WF06Q ±%, ±0.5%, ±0.25%, ±0.%, ±0.05% TC50 High Precision Power Thin Film chip resistors (RoHS compliant Halogen Free) Size 206, 0805, 0603 *Contents in this sheet are subject to change without
Pulse Withstanding Thick Film Chip Resistor-SMDP Series. official distributor of
Product: Pulse Withstanding Thick Film Chip Resistor-SMDP Series Size: /// official distributor of Pulse Withstanding Thick Film Chip Resistor-SMDP Series 1. Scope -This specification applies to ~ sizes
SELECTION GUIDE. Nominal Input
www.murata-ps.com NKE Series FEATURES RoHS Compliant Sub-Miniature SIP & DIP Styles 3kVDC Isolation UL Recognised Wide Temperature performance at full 1 Watt load, 40 C to 85 C Increased Power Density
Optocoupler, Phototransistor Output, Dual Channel, SOIC-8 Package
ILD25T, ILD26T, ILD27T, ILD211T, ILD213T Optocoupler, Phototransistor Output, Dual Channel, SOIC-8 Package i17925 A1 C2 A3 C4 i17918-2 8C 7E 6C 5E DESCRIPTION The ILD25T, ILD26T, ILD27T, ILD211T, and ILD213T
SPECIFICATION. Topview 5550 SMD LED IWS 505-RB. Product : Topview 5550 SMD LED Part No : IWS-505-RB Customer : Date : 2007. 11. 10 Ver.1.0.
SPECIFICATION Product : Topview 555 SMD LED Part No : Customer : Date : 27.. Ver.. Customer : Approval Manufacturer : ITSWELL Co., LTD Proposed By Approval Comment Suwon Company : 442-9, 82 Uman Industrial
TQ SMD RELAYS TQ SMD LOW-PROFILE SURFACE-MOUNT RELAY FEATURES SPECIFICATIONS
LOW-PROFILE SURFACE-MOUNT RELAY RELAYS.55 5.6. FEATURES Low-profile: 6 mm.36 inch (Tape height: max. 6.5 mm.56 inch) Tape and reel package is available as standard packing style Surge withstand between
Y.LIN ELECTRONICS CO.,LTD.
Features Current transfer ratio (CTR 50~600% at I F =5mA, V CE =5V) High isolation voltage between input and output (Viso=5000 V rms ) Creepage distance >7.62 mm Operating temperature up to +110 C Compact
SD Memory Card Connectors
SD Memory Card Connectors DM Series Withstands higher force of card insertion. Card Standard type Metal cover extends over the back of the connector. Features. Withstands higher force of card insertion
RC NETWORKS SALES GUIDE
SALES GUIDE INTRODUCTION TO Recent developments in electronic equipment have shown the following trends: Increasing demands for numerical control machines, robotics and technically advanced appliances
Operating Temperature Range: -30 to +85ç (Note 1) Operating Humidity Range: 40 to 80%
All non- products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website search at www.hirose-connectors.com, or contact your Hirose sales representative.
DISCRETE SEMICONDUCTORS DATA SHEET. BLF244 VHF power MOS transistor
DISCRETE SEMICONDUCTORS DATA SHEET September 1992 FEATURES High power gain Low noise figure Easy power control Good thermal stability Withstands full load mismatch Gold metallization ensures excellent
3. ELECTRICAL PERFORMANCE PROPERTY TEST CONDITION PERFORMANCE 3. 1 Contact Resistance 1) Center Push 100mΩ Max
1. GENERAL 1. 1 Application : This specification is applied to MULTI WAY SWITCH for electronic equipment. 1. 2 Operating Temperature Range :-25 ~ 70 1. 3 Storage Temperature Range :-0 ~ 85. However, 96
SMD High Power Precision Resistors
Key Features High precision - TCR 5ppm/ C and 10ppm/ C Tolerance down to 0.01% Thin film (nichrome) Choice of packages Stable high frequency performance Temperature range -55 C to +155 C Applications Communications
MBA/SMA 0204, MBB/SMA 0207, MBE/SMA 0414 - Professional www.vishay.com. Professional Metal Film Leaded Resistors
,, - Professional Professional Metal Film Leaded Resistors DESCRIPTION,, and professional leaded thin film resistors are the general purpose resistor for all fields of professional electronics where reliability
Product Specification
Product Specification Model No.: DC-240-L01-00-TR Description: H=3.00mm Horizontal SMD DC Power Jacks Pin Shaft Diameter: 0.65mm Packing Method: Tape & Reel (600pcs./R) 1. General 1a. Scope The jacks should
Surface Mount Multilayer Ceramic Chip Capacitors for Automotive Applications
Surface Mount Multilayer Ceramic Chip Capacitors for Automotive Applications FEATURES AEC-Q200 qualified with PPAP available Available in 0402 to 1812 body size Three dielectric materials AgPd termination
How To Test A Sidactor Series For A Power Supply
SDP Series - SOT23-5 RoHS Pb e3 Description This new SIDACtor series is targeted for the tertiary or line driver side protection position for VDSL2+, ADSL2 applications and general I/O protection functions.
40 V, 200 ma NPN switching transistor
Rev. 01 21 July 2009 Product data sheet BOTTOM VIEW 1. Product profile 1.1 General description NPN single switching transistor in a SOT883 (SC-101) leadless ultra small Surface-Mounted Device (SMD) plastic
IR Receiver Module for Light Barrier Systems
Not for New Design - Alternative Available: New TSSP4038 (#82458) www.vishay.com IR Receiver Module for Light Barrier Systems TSOP4038 2 3 MECHANICAL DATA Pinning: = OUT, 2 = GND., 3 = V S 6672 FEATURES
DATA SHEET ARRAY CHIP RESISTORS YC/TC 5%, 1% sizes YC:102/104/122/124/162/164/248/324/158/358 TC: 122/124/164
Product specification December 11, 2015 V.2 0 DATA SHEET ARRAY CHIP RESISTORS YC/TC 5%, 1% sizes YC:102/104/2/4/162/164/248/324/158/358 TC: 2/4/164 RoHS compliant Product specification 2 SCOPE This specification
Life Expectancy : Class A Class B Class C Class D 30,000hrs 10,000hrs 3,000hrs 1000hrs
3.2 Motor Run Capacitors : continuous operation ypical Applications : Motor Run Capacitor ideal for various motor applications in washing machine, air conditioner, electric water pump, power factor collection
SC-1000/2000 ROTARY CODED SWITCHES FEATURES PART NUMBER DESIGNATION S C - 1 0 1 0 T B. RoHS compliant
SC-00/2000 RoHS compliant INTERNAL STRUCTURE SC-00 / 2000 series 4 2 3 6 FEATURES BC RoHS compliant Fine click with metallic spring Low profile of 3.9 mm makes perfect for high density board mounting applications
Optocoupler, Phototransistor Output, High Reliability, 5300 V RMS, Low Input Current
Optocoupler, Phototransistor Output, High Reliability, 53 V RMS, Low Input Current FEATURES A C 1 2 4 3 C E Operating temperature from -55 C to +11 C Good CTR linearity depending on forward current Isolation
HIGH SPEED-10 MBit/s LOGIC GATE OPTOCOUPLERS
DESCRIPTION The, /6 single-channel and /6 dual-channel optocouplers consist of a 5 nm AlGaAS LED, optically coupled to a very high speed integrated photodetector logic gate with a strobable output. This
WCAP-CSGP Ceramic Capacitors
A Dimensions: [mm] B Recommended land pattern: [mm] D1 Electrical Properties: Properties Test conditions Value Unit Tol. Capacitance 1±0.2 Vrms, 1 khz ±10% C 15000 pf ± 10% Rated voltage Dissipation factor
AZ420 MINIATURE GENERAL PURPOSE RELAY
MINIATURE GENERAL PURPOSE RELAY FEATURES Rugged construction for high reliability Life expectancy greater than 0 million operations DC coils to 11 V Power consumption as low as 2 mw per pole available
4 A CAPACITY, THE VARIETY OF CONTACT ARRANGEMENTS FEATURES
4 A CAPACITY, THE VARIETY OF CONTACT ARRANEMENTS S RELAYS FEATURES 28. 1.12 12..472 1.4.49 The variety of contact arrangements 2 Form A 2 Form B, 3 Form A 1 Form B, 4 Form A Latching types available High
INTEGRATED CIRCUITS. For a complete data sheet, please also download:
INTEGRATED CIRCUITS DATA SHEET For a complete data sheet, please also download: The IC06 74HC/HCT/HCU/HCMOS Logic Family Specifications The IC06 74HC/HCT/HCU/HCMOS Logic Package Information The IC06 74HC/HCT/HCU/HCMOS
Description. Dimensions. Features. www.pwb-encoders.com. precision works better
Description The MEC22 is a high resolution optical hollow shaft encoder that can be fixed quickly and easily on different sizes of motor shafts. The encoder provides two square wave outputs in quadrature
Spezifikation für Freigabe / specification for release
Artikelnummer / part number : 82550350 Datum / Date : 31.07.06 description : 0805 SMD VARISTOR Lead Free SMD size: 0805 ROHS Compliant A Mechanische Abmessungen / dimensions : SIZE SIZE W L T a 0402 0.5
STPS5L60. Power Schottky rectifier. Description. Features
Power Schottky rectifier Datasheet - production data Description Power Schottky rectifier suited for switch mode power supplies and high frequency inverters. This device is intended for use in low voltage
SM712 Series 600W Asymmetrical TVS Diode Array
SM712 Series 6W Asymmetrical TVS Diode Array RoHS Pb GREEN Description The SM712 TVS Diode Array is designed to protect RS-485 applications with asymmetrical working voltages (-7V to from damage due to
Optocoupler, Phototransistor Output, AC Input
Optocoupler, Phototransistor Output, AC Input DESCRIPTION The SFH62A (DIP) and SFH626 (SMD) feature a high current transfer ratio, low coupling capacitance and high isolation voltage. These couplers have
How To Control A Power Supply On A Powerline With A.F.F Amplifier
INTEGRATED CIRCUITS DATA SHEET Sound I.F. amplifier/demodulator for TV File under Integrated Circuits, IC02 March 1986 GENERAL DESCRIPTION The is an i.f. amplifier with a symmetrical FM demodulator and
INTEGRATED CIRCUITS DATA SHEET. TDA7000 FM radio circuit. Product specification File under Integrated Circuits, IC01
INTEGRATED CIRCUITS DATA SHEET File under Integrated Circuits, IC01 May 1992 GENERAL DESCRIPTION The is a monolithic integrated circuit for mono FM portable radios, where a minimum on peripheral components
Kit 27. 1W TDA7052 POWER AMPLIFIER
Kit 27. 1W TDA7052 POWER AMPLIFIER This is a 1 watt mono amplifier Kit module using the TDA7052 from Philips. (Note, no suffix.) It is designed to be used as a building block in other projects where a
STIEC45-xxAS, STIEC45-xxACS
Transil TVS for IEC 61000-4-5 compliance Datasheet - production data differential mode MIL STD 883G, method 3015-7 Class 3B 25 kv HBM (human body model) Resin meets UL 94, V0 MIL-STD-750, method 2026 solderability
SIL Resistor Network. Resistors. Electrical. Environmental. L Series. Thick Film Low Profile SIP Conformal Coated Resistor Networks RoHS Compliant
Resistors SIL Resistor Network Thick Film Low Profile SIP Conformal Coated Resistor Networks RoHS Compliant All parts are Pb-free and comply with EU Directive 2011/65/EU (RoHS2) Electrical Standard Resistance
Optocoupler, Phototransistor Output, with Base Connection
Optocoupler, Phototransistor Output, with Base Connection FEATURES i794-4 DESCRIPTION This datasheet presents five families of Vishay industry standard single channel phototransistor couplers. These families
High Surge Axial Cemented Wirewound Resistors
High Surge Axial Cemented Wirewound Resistors FEATURES High voltage surge (up to 12 kv) withstanding capability Non flammable silicon cement coating High grade ceramic core Material categorization: for
Pulse Proof Thick Film Chip Resistors
Pulse Proof Thick Film Chip Resistors FEATURES High pulse performance, up to kw Stability R/R 1 % for h at 70 C AEC-Q200 qualified Material categorization: for definitions of compliance please see www.vishay.com/doc?99912
BZW50. Transil, transient voltage surge suppressor (TVS) Features. Description
Transil, transient voltage surge suppressor (TVS) Datasheet production data Features Peak pulse power: 5000 W (10/0 µs) Stand-off voltage range from 10 V to 180 V Unidirectional and bidirectional types
CMR Series Isolated 0.75W Single and Dual Output Isolated DC/DC Converters
www.murata-ps.com CMR Series SELECTION GUIDE FEATURES Single or Dual Isolated Outputs 1kVDC or 3kVDC options Wide temperature performance at full 0.75W load -40 C to 85C Industry Standard Pinouts 5V, 12V
Thick Film Resistor Networks, Dual-In-Line, Molded DIP
Thick Film Resistor Networks, Dual-In-Line, Molded DIP FEATURES Isolated, bussed, and dual terminator schematics available 0.160" (4.06 mm) maximum seated height and rugged, molded case construction Thick
ONE OF THE SMALLEST SNAP-ACTION SWITCHES IN THE WORLD. FEATURES Superminiature type, light-weight snap action switch PC board terminal type (0.
ONE OF THE SMALLEST SNAP-ACTION SWITCHES IN THE WORLD SWITCHES FEATURES Superminiature type, light-weight snap action switch PC board terminal type (0.2g) Solder terminal type with mounting holes (0.3g)
Contents. 12. Lot Number 10. 13. Reel Packing Structure 11. 14. Precaution for Use 13. 15. Hazard Substance Analysis 14. 16. Revision History 18
Rev : 00 ISSUE NO : DATE OF ISSUE : 2009. 04. 10 S P E C I F I CATION MODEL : SLHNNWW629T1S0U0S0 [Rank : (S0), (U0), (S0)] HIGH POWER LED - SUNNIX6 CUSTOMER : CUSTOMER CHECKED CHECKED APPROVED SAMSUNG
INTEGRATED CIRCUITS DATA SHEET. TDA7052 1 W BTL mono audio amplifier. Product specification File under Integrated Circuits, IC01
INTEGRATED CIRCUITS DATA SHEET TDA7052 1 W BTL mono audio amplifier File under Integrated Circuits, IC01 July 1994 GENERAL DESCRIPTION The TDA7052 is a mono output amplifier in a 8-lead dual-in-line (DIL)
SECTION 13. Multipliers. Outline of Multiplier Design Process:
SECTION 13 Multipliers VMI manufactures many high voltage multipliers, most of which are custom designed for specific requirements. The following information provides general information and basic guidance