Cisco 10GBASE SFP+ Modules
|
|
|
- Arnold Matthews
- 7 years ago
- Views:
Transcription
1 Data Sheet Cisco 10GBASE SFP+ Modules Overview The Cisco 10GBASE SFP+ modules (Figure 1) offer customers a wide variety of 10 Gigabit Ethernet connectivity options for data center, enterprise wiring closet, and service provider transport applications. Figure 1. Cisco 10GBASE SFP+ Modules Features and Benefits Main features of Cisco 10GBASE SFP+ modules include: Smallest 10G form factor Supports 10GBASE Ethernet Hot-swappable input/output device that plugs into an Ethernet SFP+ port of a Cisco switch Provides flexibility of interface choice Supports pay-as-you-populate model Supports digital optical monitoring capability Supports the Cisco quality identification (ID) feature that enables a Cisco switch to identify whether the module is certified and tested by Cisco Optical interoperability with 10GBASE XENPAK, 10GBASE X2, and 10GBASE XFP interfaces on the same link 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 1 of 5
2 Cisco SFP-10G-SR The Cisco 10GBASE-SR Module supports a link length of 26m on standard Fiber Distributed Data Interface (FDDI)-grade multimode fiber (MMF). Using 2000 MHz*km MMF (OM3), up to 300m link lengths are possible. The Cisco 10GBASE-LRM Module supports link lengths of 220m on standard Fiber Distributed Data Interface (FDDI) grade multimode fiber (MMF). To ensure that specifications are met over FDDI-grade, OM1 and OM2 fibers, the transmitter should be coupled through a mode conditioning patch cord. No mode conditioning patch cord is required for applications over OM3. For additional information on mode conditioning patch cord requirements please see: The Cisco 10GBASE-LRM Module also supports link lengths of 300m on standard single-mode fiber (, G.652) Cisco FET-10G The Cisco FET-10G Fabric Extender Transceiver support link lengths up to 100m on laser-optimized OM3 multimode fiber. It is supported on fabric links only from a Nexus 2000 to a Cisco parent switch. Note this product is not orderable individually. For more information refer to Nexus 2000 datasheet: The Cisco 10GBASE-LR Module supports a link length of 10 kilometers on standard single-mode fiber (, G.652). The Cisco 10GBASE-ER Module supports a link length of up to 40 kilometers on standard single-mode fiber (, G.652). Cisco SFP+ Copper Cisco SFP+ Copper Twinax cables are suitable for very short distances and offer a highly cost-effective way to connect within racks and across adjacent racks. Cisco offers passive Twinax cables in lengths of 1, 3 and 5 meters, and active Twinax cables in lengths of 7 and 10 meters. Technical Specifications Platform Support Cisco SFP+ modules are supported on Cisco switches and routers. For more details, refer to the document Cisco 10 Gigabit Ethernet Transceiver Modules Compatibility Matrix : Connectors and Cabling Connectors: Dual LC/PC connector (-SR, -LRM, -LR, -ER, and FET-10G) Note: Only connections with patch cords with PC or UPC connectors are supported. Patch cords with APC connectors are not supported. All cables and cable assemblies used must be compliant with the standards specified in the standards section Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 2 of 5
3 Table 1 provides cabling specifications for the Cisco SFP+ modules. Table 1. SFP+ Port Cabling Specifications Cisco SFP+ Wavelength (nm) Cable Type Cisco SFP-10G-SR 8 MMF MMF Cisco FET-10G 8 MMF Core Size (microns) Modal Bandwidth (MHz*km)*** 1310 G km 15 G km ** Cisco SFP-H10GB-CU1M - Twinax cable, passive, 30AWG cable Cisco SFP-H10GB-CU3M - Twinax cable, passive, 30AWG cable Cisco SFP-H10GB-CU5M - Twinax cable, passive, 24AWG cable Cisco SFP-H10GB-ACU7M - Twinax cable, active, 30 AWG cable Cisco SFP-H10GB-ACU10M - Twinax cable, active, 28 AWG cable 62.5 G Cable Distance* 26m 33m 66m 82m 300m 220m 100m 220m 300m 25m 100m - - 1m - - 3m - - 5m - - 7m m * Minimum cabling distance for -SR, -LRM, -LR, -ER modules is 2m, according to the IEEE 802.3ae. ** Links longer than 30 km are considered engineered links as per IEEE 802.3ae. *** Specified at transmission wavelength. Table 2 shows the main optical characteristics for the Cisco SFP+ modules. Table 2. Optical Transmit and Receive Specifications Cisco SFP-10G-SR Type 10GBASE-SR 8 nm MMF 10GBASE-LRM 1310 nm MMF and Transmit Power (dbm)* Receive Power (dbm) * Maximum Minimum Maximum Minimum -1.2 ** to (in average) and -6.4 (in OMA) *** Transmit and Receive Wavelength (nm) 1260 to 1355 Cisco FET-10G FET-10G 8nm MMF to GBASE-LR 1310 nm 10GBASE-ER 15 nm to to 1565 * Transmitter and receiver power is in average, unless specified. ** The launch power shall be the lesser of the class 1 safety limit or the maximum receive power. Class 1 laser requirements are defined by IEC : *** Both average and OMA specifications must be met simultaneously Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 3 of 5
4 Table 3 describes the bail latch color code for each type of optical SFP+ module. Table 3. SFP+ Optical Modules Color Code Cisco SFP-10G-SR Cisco FET-10G Bail Latch Color Beige Orange Brown Blue Red Dimensions Dimensions (H x W x D): 8.5 x 13.4 x 56.5 mm. Cisco SFPs typically weigh 75 grams or less. Environmental Conditions and Power Requirements Operating temperature range: Commercial temperature range: 0 to 70 C (32 to 158 F) Storage temperature range: -40 to 85 C (-40 to 185 F) Table 4 provides the maximum power consumption ratings per Cisco SFP+ module Table 4. SFP+ Modules Maximum Power Consumption Power Consumption (W) Cisco SFP-10G-SR 1 1 Cisco FET-10G Cisco SFP-H10GB-CU1M 1 Cisco SFP-H10GB-CU3M 1 Cisco SFP-H10GB-CU5M 1 Cisco SFP-H10GB-ACU7M 1 Cisco SFP-H10GB-ACU10M 1 Warranty Standard warranty: 90 days. Extended warranty (optional): Cisco SFP+ modules can be covered in a Cisco SMARTnet Service support contract for the Cisco switch or router chassis. Ordering Information Table 5 provides the ordering information for Cisco SFP+ modules and related cables. Table 5. Ordering Information Description SFP+ Modules Cisco 10GBASE-SR SFP+ Module for MMF Number SFP-10G-SR 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 4 of 5
5 Description Cisco 10GBASE-LRM SFP+ Module for MMF and Cisco 10GBASE-LR SFP+ Module for Cisco 10GBASE-ER SFP+ Module for SFP+ Copper Modules 10GBASE-CU SFP+ Cable 1 Meter, passive 10GBASE-CU SFP+ Cable 3 Meter, passive 10GBASE-CU SFP+ Cable 5 Meter, passive 10GBASE-CU SFP+ Cable 7 Meter, active 10GBASE-CU SFP+ Cable 10 Meter, active Number SFP-10G-LRM SFP-10G-LR SFP-10G-ER SFP-H10GB-CU1M SFP-H10GB-CU3M SFP-H10GB-CU5M SFP-H10GB-ACU7M SFP-H10GB-ACU10M Regulatory and Standards Compliance Standards: GR-20-CORE: Generic Requirements for Optical Fiber and Optical Fiber Cable GR-326-CORE: Generic Requirements for Single-Mode Optical Connectors and Jumper Assemblies GR-1435-CORE: Generic Requirements for Multifiber Optical Connectors IEEE 802.3ae (-SR, -LRM, LR, -ER) SFP+ MSA SFF-8431 (Optical Modules and Passive Twinax cables) SFP+ MSA SFF-8461 (Active Twinax cables) Safety: Laser Class 1 21CFR-1040 LN# 7/2001 Laser Class 1 IEC Cable jacket of SFP+ copper modules is UL #E Compliant All length SFP+ copper cables are ELV and RoHS Compliant Additional Information For more information about Cisco 10GBASE SFP+ fiber modules or 10GBase SFP+ copper modules (twinax cable), contact your sales representative or visit: Printed in USA C / Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 5 of 5
CISCO 10GBASE X2 MODULES
DATA SHEET CISCO 10GBASE X2 MODULES Figure 1. Cisco 10GBASE X2 and Xenpak Module PRODUCT OVERVIEW The Cisco 10GBASE X2 modules (Figure 1) offers customers a wide variety of 10 Gigabit Ethernet connectivity
Cisco 10GBASE SFP+ Modules
Data Sheet Cisco 10GBASE SFP+ Modules A broad range of industry-compliant SFP+ modules for 10 Gigabit Ethernet deployments in diverse networking environments Product Overview The Cisco 10GBASE SFP+ modules
Cisco Small Form-Factor Pluggable Modules for Gigabit Ethernet Applications
Data Sheet Cisco Small Form-Factor Pluggable Modules for Gigabit Ethernet Applications The industry-standard Cisco Small Form-Factor Pluggable (SFP) Gigabit Interface Converter is a hot-swappable input/output
Cisco SFP Optics for Gigabit Ethernet Applications
Cisco SFP Optics for Gigabit Ethernet Applications The industry-standard Cisco Small Form-Factor Pluggable (SFP) Gigabit Interface Converter is a hot-swappable input/output device that plugs into a Gigabit
CISCO DWDM XENPAK. Main features of the Cisco DWDM XENPAK include:
DATA SHEET CISCO DWDM XENPAK OVERVIEW The Cisco Dense Wavelength-Division Multiplexing (DWDM) XENPAK pluggable allows enterprise companies and service providers to provide scalable and easy-to-deploy 10
CISCO 10GBASE X2 MODULES
DATA SHEET CISCO 10GBASE X2 MODULES Figure 1. Cisco 10GBASE X2 and Xenpak Module PRODUCT OVERVIEW The Cisco 10GBASE X2 modules (Figure 1) offers customers a wide variety of 10 Gigabit Ethernet connectivity
SFP Transceiver Specifications
APPENDIXB This appendix provides cabling specifications for the SFP transceivers supported on the Cisco ME 60 Ethernet switch. Figure B-1 shows an optical SFP transceiver with the major features labeled.
Your Network. Our Connection. 10 Gigabit Ethernet
Your Network. Our Connection. 10 Gigabit Ethernet t Agenda Why 10G? Applicable 10GbE Standards Distance Restrictions Copper Fiber Fiber Repeaters 3R s Fiber Module Types Form Factors of 10G modules Future
QuickSpecs. Models HP X132 10G SFP+ LC ER Transceiver. HP SFP+ Transceivers (SR, LRM, LR and ER) Overview
Overview Models HP X132 10G LC SR Transceiver HP X132 10G LC LR Transceiver HP X132 10G LC LRM Transceiver HP X132 10G LC ER Transceiver J9150A J9151A J9152A J9153A DA - 13285 Worldwide Version 3 September
QuickSpecs. Models HP X131 10G X2 CX4 Transceiver. HP X131 10G X2 Transceivers (SR, LRM, LR, ER and CX4) Overview. HP X131 10G X2 SC LRM Transceiver
Overview Models HP X131 10G SC SR Transceiver HP X131 10G SC LR Transceiver HP X131 10G SC ER Transceiver HP X131 10G CX4 Transceiver HP X131 10G SC LRM Transceiver J8436A J8437A J8438A J8440C J9144A DA
HIGH QUALITY FOR DATA CENTRES ACCESSORIES AND INFRASTRUCTURE. PRODUCT CATALOG 12/2014 PRO-ZETA a.s.
HIGH QUALITY ACCESSORIES AND INFRASTRUCTURE FOR DATA CENTRES PRODUCT CATALOG 12/2014 PRO-ZETA a.s. COMPANY PROFILE PROZETA is a high tech IT company founded in 1991, providing hardware distribution, connectivity
Cisco Small Form-Factor Pluggable Modules for Gigabit Ethernet Applications
Cisco Small Form-Factor Pluggable Modules for Gigabit Ethernet Applications The industry-standard Cisco Small Form-Factor Pluggable (SFP) Gigabit Interface Converter is a hotswappable input/output device
The ABC of Direct Attach Cables
The ABC of Direct Attach Cables Thomas Ko, RCDD Product Manager TE Connectivity Network Speed and Technology 10/40/100 Gbps the transition is occurring right now What are Customers Saying about their 10/40/100
Intel Ethernet SFP+ Optics
Product Brief Intel Ethernet SFP+ Optics Network Connectivity Intel Ethernet SFP+ Optics SR and LR Optics for the Intel Ethernet Server Adapter X520 Family Hot-pluggable SFP+ footprint Supports rate selectable
Arista 40G Cabling and Transceivers: Q&A
Arista 40G Cabling and Transceivers: Q&A 40G Cabling Technical Q&A Document 40Gigabit Cables and Transceivers Q. What 40G cables and transceivers are available from Arista? A. Arista supports a full range
Using a Fabric Extender with a Cisco Nexus 5000 Series Switch
CHAPTER Using a Fabric Extender with a Cisco Nexus 5000 Series Switch This chapter describes the Cisco Nexus 000 Series Fabric Extenders (FEXs) and includes these sections: Information About, page - Cisco
10 Gigabit Ethernet Cabling
ProCurve Networking Technical Brief 10 Gigabit Ethernet Cabling Introduction... 2 Why 10 Gigabit Today?... 2 More for Less... 2 Data Centers... 2 Campus Backbone Links... 3 Metro Area Transmission... 3
Cisco MFE and MGE SFP Transceivers Cisco Small Business Network Accessories
Data Sheet Cisco MFE and MGE SFP Transceivers Cisco Small Business Network Accessories Easily Connect Switches with Fiber Optic Networking Modules Highlights Adds fiber-optic connectivity to Cisco Small
Features and Benefits
DATASHEET Optic Modules Product Description Juniper Networks has platforms ranging from the Juniper Networks CTP Series Circuit to Packet Platforms, BX Series Multi-Access Gateways, E Series Broadband
3Com Transceivers OVERVIEW. Standards-based flexible Ethernet connections KEY BENEFITS
3Com Transceivers DATA SHEET Standards-based flexible Ethernet connections OVERVIEW 3Com transceivers are industry-standard, hot-swappable devices that plug into a Fast, Gigabit, or 10-Gigabit Ethernet
10Gb/s SFP+ LRM 1310nm FP with PIN Receiver 220meters transmission distance
Feature 10Gb/s serial optical interface compliant to 802.3aq 10GBASE-LRM Electrical interface compliant to SFF-8431 specifications for enhanced 8.5 and 10 Gigabit small form factor pluggable module SFP+
BROCADE OPTICS FAMILY
DATA SHEET www.brocade.com BROCADE OPTICS FAMILY ENTERPRISE LAN SWITCHING Highly Reliable, Brocade- Qualified Optics HIGHLIGHTS Rigorously tested for performance and reliability by Brocade Hot-swappable
Network Topologies and Distances
Network Topologies and Distances Chris Di Minico MC Communications cdiminico@ieee.org 1 Presentation objectives Considerations for 802.3ba fiber link distance objectives 2 HSSG Objectives Support full-duplex
Cisco 10-Gigabit Ethernet Transceiver Modules Compatibility Matrix
Cisco 10-Gigabit Ethernet Transceiver Modules Compatibility Matrix This publication contains information about the Cisco platforms and software versions that support the 10-Gigabit Ethernet transceiver
Migration Strategy for 40G and 100G Ethernet over Multimode Fiber
Introduction Migration Strategy for 0G and 00G Ethernet over Multimode Fiber There is a need for increased network bandwidth to meet the global IP traffic demand, which is growing at a rate of 0% per year
Ethernet 102: The Physical Layer of Ethernet
Ethernet 102: The Physical Layer of Ethernet Scott Kipp President of the Ethernet Alliance (Brocade) Frank Yang Marketing Chair, Next Generation Cabling Subcommittee (CommScope) February 27th, 2012 1 The
Uncompromising Integrity. Making 100Gb/s deployments as easy as 10Gb/s
Uncompromising Integrity Making 100Gb/s deployments as easy as 10Gb/s Supporting Data Rates up to 100Gb/s Mellanox 100Gb/s LinkX cables and transceivers make 100Gb/s deployments as easy as 10Gb/s. A wide
Contract Number NNG07DA20B NASA SEWP IV
185-800604 DDS5500-1000EC DDS5500-1000EC DDoS Defense System, bundled with 1-unit license for "Network Security Analyzer" reporting and event management software for Windows. CD-ROM included. Built-in
100 GBE AND BEYOND. Greg Hankins <ghankins@brocade.com> NANOG52. Diagram courtesy of the CFP MSA. NANOG52 2011/06/14
100 GBE AND BEYOND Greg Hankins NANOG52 Diagram courtesy of the CFP MSA. NANOG52 2011/06/14 Agenda and What s Covered in This Presentation Ethernet interface technology Overview
Security & Surveillance Cabling Systems
Security & Surveillance Cabling Systems Security and Surveillance Cabling Systems The video security industry is growing and ever-changing, offering a wealth of opportunity for today s security professionals.
G-TAP A Series // Data Sheet
Product The GigaTAP A Series is a line of network TAPs designed with the Gigamon Always On architecture. This one-of-a-kind architecture eliminates network link downtime on network connections through
Ethernet 301: 40/100GbE Fiber Cabling and Migration Practices
Ethernet 301: 40/100GbE Fiber Cabling and Migration Practices Robert Reid (Panduit) Frank Yang (CommScope, Inc) 1 The Presenters Robert Reid Sr. Product Development Manager at Panduit Frank Yang Marketing
Attaching the PA-A1-ATM Interface Cables
CHAPTER 4 Attaching the PA-A1-ATM Interface Cables To continue your PA-A1-ATM port adapter installation, you must attach the port adapter cables. The instructions that follow apply to all supported platforms.
Whitepaper. 10 Things to Know Before Deploying 10 Gigabit Ethernet
Whitepaper 10 Things to Know Before Deploying 10 Gigabit Ethernet Table of Contents Introduction... 3 10 Gigabit Ethernet and The Server Edge: Better Efficiency... 3 SAN versus Fibre Channel: Simpler and
Application Note Fiber Optic Standards Reference Guide
Multimode Ethernet Note Fiber Optic Standards Reference Guide Fiber Type 62.5/125 µm 50/125 µm 850 nm laseroptimized 50/125 µm Nominal wavelength (nm) TIA 492AAAA (OM1) TIA 492AAAB (OM2) TIA 492AAAC (OM3)
Ixia Net Optics 10G Regen Tap
Ixia Net Optics 10G Regen Tap Ixia Net Optics 10G Regen Taps solve the key physical layer challenges of multi-device monitoring for 10 Gigabit and gigabit networks. For a complete picture of network health,
Fibre Channel Fiber Cabling
OVERVIEW This paper will discuss the Fibre Channel standards for fiber cables at both 1Gb and 2Gb speeds, and also some discussion of departures from standard. Items discussed will be cable types, plug
How To Make A Data Center More Efficient
Data Center: Technology Drivers Infrastructure Trends 40G / 100G Migration Maurice F. Zetena III Vice President Leviton Technology Data Center Group Leviton Network Solutions Technology Drivers Convergence
Trends In Data Rate And Link Length In Evolving Optical Standards
Trends In Data Rate And Link Length In Evolving Optical Standards David Cunningham 22 nd September 2013 Outline Building and Data Centre link lengths Trends for standards-based electrical interfaces Data
Data Center Optimization: Component Choice. Innovative Design. Enabling Infrastructure
Data Center Optimization: Component Choice and Innovative Design Combine to Allow the Creation of an Enabling Infrastructure Data Center Spaces Data Center Spaces as Defined by the TIA 942 Standard Source:
GIGABIT ETHERNET. Greg Hankins <ghankins@brocade.com> UKNOF16. v1.0 2010/04/22
40 AND 100 GIGABIT ETHERNET OVERVIEW Greg Hankins UKNOF16 v1.0 2010/04/22 Agenda Standards Update Form Factor and Cabling Timeline (ie When can I have it?) Market and Pricing Trends
Ixia Director TM. Powerful, All-in-One Smart Filtering with Ultra-High Port Density. Efficient Monitoring Access DATA SHEET
Ixia Director TM Powerful, All-in-One Smart Filtering with Ultra-High Port Density The Ixia Director TM is a smart filtering appliance that directs traffic of interest to your monitoring tools. Now you
10GBASE-T SFP+ Transceiver Module: Get the most out of your Cat 6a Cabling
Technical White Paper: 10GBASE-T SFP+ Transceiver Module February 24, 2016 10GBASE-T SFP+ Transceiver Module: Get the most out of your Cat 6a Cabling Enabling More Cat 6a Connectivity for 10GbE Networking
LONGLINE 2km XFP Optical Transceiver
LONGLINE 2km XFP Optical Transceiver Features Supports 9.95Gb/s to 11.1Gb/s bit rates Hot-pluggable XFP footprint Maximum link length of 2km with SMF 1310nm FP laser XFP MSA package with duplex LC connector
LONGLINE 10Gbps 10km SFP+ Optical Transceiver
LONGLINE 10Gbps 10km SFP+ Optical Transceiver Features Optical interface compliant to IEEE 802.3ae 10GBASE-LR Electrical interface compliant to SFF-8431 Hot Pluggable 1310nm DFB transmitter, PIN photo-detector
Specifying Optical Fiber for Data Center Applications Tony Irujo Sales Engineer
Specifying Optical Fiber for Data Center Applications Tony Irujo Sales Engineer tirujo@ofsoptics.com Outline Data Center Market Drivers Data Center Trends Optical Fiber and Related Standards Optical Fiber
Gigabit Ethernet Copper-to-Fiber Converters
Gigabit Ethernet Copper-to-Fiber Converters GFT-10XX Standard multi-mode & single-mode 1000BASE-T GFT-1055E Extended Reach Multi-Mode over standard fiber GFT-1037A/B Single-Fiber, Bi-Directional Single-Mode
Cisco CWDM GBIC and CWDM SFP Installation Note
Cisco CWDM GBIC and CWDM SFP Installation Note, Product Numbers: CWDM-GBIC-1470= CWDM-GBIC-1550= CWDM-SFP-1470= CWDM-SFP-1550= CWDM-GBIC-1490= CWDM-GBIC-1570= CWDM-SFP-1490= CWDM-SFP-1570= CWDM-GBIC-1510=
1000 BASE-X SFP. Key Features DATA SHEET HIGHLIGHTS 1000BASE-SX 1000BASE-LX 1000BASE-ZX 1000BASE BX-D*
DATA SHEET 1000 BASE-X SFP HIGHLIGHTS Extreme Networks pluggable optics provide physical layer connectivity for optical-port modular switch IO blades and optical-port stackable switches. Provides a range
Simplified 40-Gbps Cabling Deployment Solutions with Cisco Nexus 9000 Series Switches
Simplified 40-Gbps Cabling Deployment Solutions with Cisco Nexus 9000 Series Switches Panduit and Cisco Accelerate Implementation of Next-Generation Data Center Network Architecture 2013 Cisco Panduit.
Migration to 40/100G in the Data Center with OM3 and OM4 Optical Connectivity
Migration to 40/100G in the Data Center with OM3 and OM4 Optical Connectivity Needs in the Data Center With the continued requirement for expansion and growth in the data center, infrastructures must provide
The Importance of minembc Laser Bandwidth Measured Multimode Fiber for High Performance Premises Networks White Paper
The Importance of minembc Laser Bandwidth Measured Multimode Fiber for High Performance Premises Networks White Paper Optical Fiber WP1150 Issued: October 2007 Supersedes: October 2006 ISO 9001 Registered
SRX Series Services Gateway Transceiver Reference
S Series Services Gateway Transceiver Reference November 2015 Contents S Series Services Gateway Transceivers................................ 2 S Series Services Gateway Transceiver Interfaces........................
PE210G6SPi9 Six Port Fiber 10 Gigabit Ethernet PCI Express Server Adapter Intel based. Description. Key Features
PE210G6SPi9 Six Port Fiber 10 Gigabit Ethernet PCI Express Server Adapter Intel based Description Silicom s 10 Gigabit Ethernet PCI Express server adapters are designed for Servers and high-end appliances.
Gigabit Switching Ethernet Media Converters - Product User Guide
Gigabit Switching Ethernet Media Converters - Product User Guide PL0338 Issue3 Introduction These Tyco Electronics Gigabit Media Converters translate between 1000Base-T copper and 1000Base-X fiber optic
100BASE-FX Technical Brief
ProCurve Netwking 100BASE-FX Technical Brief Introduction... 2 Quick histy... 2 Benefits of 100BASE-FX... 2 Conclusion... 3 Appendix... 4 Introduction New technologies generate great excitement, but sometimes
Cisco 10-Gigabit Ethernet Transceiver Modules Compatibility Matrix
Cisco 10-Gigabit Ethernet Transceiver Modules Compatibility Matrix This publication contains information about the Cisco platforms and software versions that support the 10-Gigabit Ethernet transceiver
Reliable, Consistent, Quality
Reliable, Consistent, Quality 1-877-320-3143 www.fibertronics.com Reliable, Consistent, Quality Welcome To Fibertronics Inc. Reliability, consistency, and quality is what we put behind every Fiber optic
HP Multimode OM3 LC/LC Optical Cables Overview. Models HP 50 m Multimode OM3 LC/LC Optical Cable
Overview Models HP 0.5 m Multimode OM3 LC/LC Optical Cable HP 1 m Multimode OM3 LC/LC Optical Cable HP 2 m Multimode OM3 LC/LC Optical Cable HP 5 m Multimode OM3 LC/LC Optical Cable HP 15 m Multimode OM3
10GBASE -LRM, 220m Reach GX2-31192-LRMC
Features Compatible with X2 MSA Rev2.0b 10GBASE -LRM, 220m Reach GX2-31192-LRMC Support of IEEE 802.3ae 10GBASE-LR at 10.3125Gbps Transmission Distance up to 220m(MMF) SC Receptacle 1310nm DFB Laser SC
Overcoming OM3 Performance Challenges
White Paper Overcoming OM3 Performance Challenges First Third-Party Test of Pre-terminated OM3 MTP System Demonstrates Flexibility in 10G Network Designs Gary Bernstein, RCDD Director of Product Management
Design Guide. SYSTIMAX InstaPATCH 360 Traffic Access Point (TAP) Solution. www.commscope.com
Design Guide SYSTIMAX InstaPATCH 360 Traffic Access Point (TAP) Solution www.commscope.com Contents Introduction 3 How Does a TAP Work? 3 The TAP Ecosystem 4 InstaPATCH 360 TAP Module Family 4 InstaPATCH
DATA CENTER APPLICATIONS REFERENCE GUIDE Networking & Storage
DATA CENTER APPLICATIONS REFERENCE GUIDE Scope This technical paper provides an overview about the most dominant networking and storage applications in modern data centers. Additionally, it offers information
X2 LR Optical Transponder, 10Km Reach
X2 LR Optical Transponder, 10Km Reach Features Compatible with X2 MSA Rev2.0b Support of IEEE 802.3ae 10GBASE-LR at 10.3125Gbps Transmission Distance up to 10km(SMF) SC Receptacle 1310nm DFB Laser SC Duplex
Dual Fiber SFP Series
SFP-ZX, EZX and XZX series SFP Single-Mode, Dual Fiber Transceiver for 1.25Gbps FC/GBE Features Up to 4.25Gbps Data Rate 1550nm DFB 80km with 9/125 µm SMF 120km with 9/125 µm SMF 160km with 9/125 µm SMF
Product Specification. RoHS-6 Compliant 10Gb/s 850nm Multimode Datacom XFP Optical Transceiver FTLX8512D3BCL
Product Specification RoHS-6 Compliant 10Gb/s 850nm Multimode Datacom XFP Optical Transceiver FTLX8512D3BCL PRODUCT FEATURES Hot-pluggable XFP footprint Supports 8.5Gb/s and 9.95 through 10.5Gb/s* bit
SFP+ DWDM Dual LC 10G SMF 40km Transceiver. Features. Applications APPLIED OPTOELECTRONICS, INC. A7ELXDxxEDMA0609
Features Applications 10 Gigabit Ethernet (10.3125Gbps) 10 Gigabit Fiber Channel (10.51875Gbps) SFP+ Type DWDM Dual LC Transceiver EML Laser PIN Photo Detector 40Km transmission with SMF 3.3V dual power
Copper to Fiber Stand-Alone Media Converter. Quick Installation Guide
Copper to Fiber Stand-Alone Media Converter Quick Installation Guide Model No. FVT-2001 FVT-2002 FVT-2201 FVT-2401 GVT-2000 GVT-2001 Description 10/100BASE-TX to 100BASE-FX MMF SC Converter, 2km 10/100BASE-TX
Cisco UCS 5108 Blade Server Chassis
Spec Sheet Cisco UCS 5108 Blade Server Chassis CISCO SYSTEMS PUBLICATION HISTORY 170 WEST TASMAN DR. SAN JOSE, CA, 95134 REV A.5 APRIL 20, 2015 WWW.CISCO.COM CONTENTS OVERVIEW...............................................
The Optical Fiber Ribbon Solution for the 10G to 40/100G Migration
The Optical Fiber Ribbon Solution for the 10G to 40/100G Migration Bill Charuk, SR Product Manager, Data Center Solutions Introduction With the advent of data centers in communication infrastructure, various
4.25Gbps SFP Optical Transceiver, 30km Reach
4.25Gbps SFP Optical Transceiver, 30km Reach Features Single 3.3 V supply Supports 1.0625/2.125/4.25Gb/s Fiber Channel Operation Gigabit Ethernet compatible 1310nm DFB Laser SFP MSA SFF-8074i compliant
Comparing Copper and Fiber Options in the Data Center
Comparing Copper and Fiber Options in the Data Center In most data center designs there is a mixture of both copper and fiber infrastructure. This paper is not suggesting that one should replace the other,
Evolution of Ethernet Speeds: What s New and What s Next
Here is more rough stuff on the ALTO ALOHA network. Memo sent by Bob Metcalfe on May 22, 1973. Evolution of Ethernet Speeds: What s New and What s Next Greg Hankins RIPE
PE10G2T Dual Port Fiber 10 Gigabit Ethernet TOE PCI Express Server Adapter Broadcom based
PE10G2T Dual Port Fiber 10 Gigabit Ethernet TOE PCI Express Server Adapter Broadcom based Description Silicom 10Gigabit TOE PCI Express server adapters are network interface cards that contain multiple
White Paper: 10GbE Fiber A Practical Understanding and Functional Approach
White Paper: 10GbE Fiber A Practical Understanding and Functional Approach Dennis Manes, RCDD Senior Applications Engineer Leviton Network Solutions E/8 #2509 Table of Contents Introduction 3 Types of
8.5Gb/s SFP+ Fibre Channel Optical Transceiver
8.5Gb/s SFP+ Fibre Channel Optical Transceiver Features Up to 8.5Gb/s bi-directional data links Hot Pluggable SFP+ footprint Built-in digital diagnostic functions 1310nm FP laser transmitter Duplex LC
Cisco CWDM GBIC/SFP Solution
Data Sheet Cisco GBIC/SFP Solution The Cisco Coarse Wavelength-Division Multiplexing () Gigabit Interface Converter (GBIC)/Small Form-Factor Pluggable (SFP) Solution allows enterprise companies and service
TACTICAL FIBER OPTIC MODEMS U.S. Army and ANSI Standards
This data sheet contains controlled technical data that has been cleared for public release by the U.S. Government under ITAR Exemption 22CFR 125.4(b)(13). TACTICAL FIBER OPTIC MODEMS U.S. Army and ANSI
HP ProCurve High-Speed Transceivers Installation Guide
HP ProCurve High-Speed Transceivers Installation Guide Introduction The HP ProCurve High-Speed Transceivers can be installed into a number of HP ProCurve networking devices to provide 100 Mbps and 1000
10G and Beyond in the Data Center with OM3 Fiber
10G and Beyond in the Data Center with OM3 Fiber Doug Coleman, Manager Technology and Standards doug.coleman@corning.com Overview Optical Trends in Data Center Networks The time is NOW for 10G optical
Cisco UCS 5108 Blade Server Chassis
Spec Sheet Cisco UCS 5108 Blade Server Chassis CISCO SYSTEMS PUBLICATION HISTORY 170 WEST TASMAN DR. SAN JOSE, CA, 95134 REV A.8 OCTOBER 2, 2015 WWW.CISCO.COM CONTENTS OVERVIEW...............................................
40 Gigabit and 100 Gigabit Ethernet Are Here!
WHITE PAPER www.brocade.com High- Performance Networks 40 Gigabit and 100 Gigabit Ethernet Are Here! The 40 Gigabit and 100 Gigabit Ethernet standards were adopted by the Institute of Electrical and Electronics
Connector and Cable Specifications
APPENDIXB This chapter describes the connector and cable specifications. Connector Specifications, page B-1l Cable and Adapter Specifications, page B-5 Connector Specifications 10/100/1000 Ports, page
Laser-Optimized Fiber
FIBER FAQs Laser-Optimized Fiber Technical Resource: Tony Irujo Manager, Customer Technical Support FIBER FAQs Laser-Optimized Fiber As transmission speeds over optical fiber networks in the enterprise
100 GIGABIT ETHERNET TECHNOLOGY OVERVIEW & OUTLOOK. Joerg Ammon <jammon@brocade.com> Netnod spring meeting 2012
100 GIGABIT ETHERNET TECHNOLOGY OVERVIEW & OUTLOOK Joerg Ammon Netnod spring meeting 2012 Agenda Industry trends 100GE technology Outlook 2 Traffic growth NetNod:'Yearly' graph (1
The Need for Speed Drives High-Density OM3/OM4 Optical Connectivity in the Data Center
The Need for Speed Drives High-Density OM3/OM4 Optical Connectivity in the Data Center Doug Coleman, Manager, Technology & Standards, Corning Cable Systems Optical connectivity with OM3/OM4 laser-optimized
Industry solutions: Broad cast
Industry solutions: Broad cast BC 2 industry solutions: Broadcast Optical Cable Corporation s broad range of Fiber Optic Broadcast Cables are specifically designed for real-time transmission of high definition
Cabling & Test Considerations for 10 Gigabit Ethernet LAN
Introduction Current communication data rates in local networks range from 10/100 megabits per second (Mbps) in Ethernet to 1 gigabit per second (Gbps) in fiber distributed data interface (FDDI) and Gigabit
Latest Trends in Data Center Optics
Latest Trends in Data Center Optics IX Fórum 9 December 8, 2015 Christian Urricariet Finisar Corporation 1 Finisar Corporation Technology Innovator. Broad Product Portfolio. Trusted Partner. Optics industry
Specifying Optical Fiber for Data Center Applications Tony Irujo Sales Engineer
Specifying Optical Fiber for Data Center Applications Tony Irujo Sales Engineer tirujo@ofsoptics.com Outline Data Center Market Drivers Data Center Trends Optical Fiber and Related Standards 40G & 100G
CISCO SFP OPTICS FOR PACKET-OVER-SONET/SDH AND ATM APPLICATIONS
DATA SHEET CISCO SFP OPTICS FOR PACKET-OVER-SONET/SDH AND ATM APPLICATIONS The Cisco industry-standard Small Form-Factor Pluggable Interface Converter (SFP) for packet-over-sonet/sdh (POS), optical networking,
QuickSpecs. Models. ProCurve Mini-GBICs Overview. ProCurve Gigabit-LX-LC Mini-GBIC. ProCurve Gigabit-LH-LC Mini-GBIC
Overview ProCurve Gigabit-SX-LC Mini-GBIC ProCurve Gigabit-LX-LC Mini-GBIC ProCurve Gigabit-LH-LC Mini-GBIC Models ProCurve Gigabit-SX-LC Mini-GBIC ProCurve Gigabit-LX-LC Mini-GBIC ProCurve Gigabit-LH-LC
100 Gb/s Ethernet/OTN using 10X10 MSA Optical Modules
100 Gb/s Ethernet/OTN using 10X10 MSA Optical Modules David Lewis, JDSU Jim Tavacoli, Santur Scott Kipp, Brocade Bikash Koley, Google Vijay Vusirikala, Google Executive Summary: 10X10 MSA based optical
Prisma IP 10 GbE VOD Line Card
Digital Transport Prisma IP 10 GbE VOD Line Card Description The Prisma IP 10 GbE Line Card family of products consists of Transmitter (OTX), Receiver (ORX), and Transceiver (OTR) modules. These modules
Quick Reference Guide High Speed Input/Output Solutions
Quick Reference Guide The pluggable I/O interface offers significant advantages as a high speed I/O interconnect. With a standard equipment I/O interface and the flexibility of pluggable modules come the
Preparing Infrastructure for 10 Gigabit Ethernet Applications
Preparing Infrastructure for 10 Gigabit Ethernet Applications Christopher T. Di Minico, Cable Design Technologies (CDT) Corporation, Bruce Tolley, Cisco Systems Background The Internet will continue to
How To Connect A 10Gbps Sfp+ Bi-Directional Transceiver To A Single Mode Fiber With A Single Power Cell (Sfp+) To A Power Cell With A Power Source (Sf) (Sfl) (
Features 10Gbps SFP+ Bi-Directional Transceiver, 20km Reach 1270/1330nm TX / 1330/1270 nm RX Supports 9.95Gb/s to 10.3Gb/s data rates Simplex LC Connector Bi-Directional SFP+ Optical Transceiver Single
Optical Fiber. Smart cabling: constructing a cost-effective, reliable and upgradeable cable infrastructure for your enterprise network
Optical Fiber Smart cabling: constructing a cost-effective, reliable and upgradeable cable infrastructure for your enterprise network Carl Roberts robertsc@corning.com Cabling considerations for DCs and
WHITE PAPER. 50 versus 62.5 micron multimode fiber
WHITE PAPER 50 versus 62.5 micron multimode fiber www.ixiacom.com 915-6919-01 Rev. A, July 2014 2 Table of Contents What are 50μm fiber and 62.5μm fiber?... 4 Why two standards?... 4 Which technology should