Aeronautical Research and Testing Institute
|
|
|
- Abner Rich
- 9 years ago
- Views:
Transcription
1 VZLÚ,, a.s. Aeronautical Research and Testing Institute ENGINEERING TESTING APPLIED RESEARCH PROTOTYPE MANUFACTURE 1
2 Golden era of Czech aviation... with VZLU participation... L-29 Dolphin since 1922 L-13 Blaník glider L- 410 L-39 Albatros 2
3 Golden era of Czech aviation... with VZLU participation... Turbojet M 701 Turboprop M601 since 1922 Three spool turboprop M602 3
4 BASICS Legal status: Capital stock: Joint stock company indirectly state-owned (92% state, 8% CSOB) Profit is reinvested in RTD activities 750 mil. CZK Annual budget (2008): 250 mil. CZK Number of employees: 320 (126 graduated, 29 PhD) Top Management: Ing.. Josef Kašpar General Director Ing.. Victor Kučera Technical Director 4
5 COMPANY LOCATION PRAGUE-LETNANY Engine and Combustion Testing Facility Fatigue, Static, Vibration Test Labs Wind Tunnels Headquarters Mechanical Testing Prototype Manufacture Environmental Testing Composite structures Aircraft Propellers Landing Gear and Hydraulics Test Laboratories 5
6 ENGINEERING - TESTING - APPLIED RESEARCH - MANUFACTURE Aerodynamics - computational fluid dynamics (CFD) - wind tunnel testing Strength of structures - static and fatigue tests, material testing Testing laboratories Propulsion Special technologies Prototype production - FEM computations and analyses - modal analysis and dynamic response - mechanical tests (vibration, acceleration) - environmental testing (climatic tests) - developmental work for turbo engines - fans and a/c propellers development - composite structures (infusion methods) - micro-accelerometer development for space - precision CNC machining, 3D measurement Wind tunnel and test equip. - design and turn-key delivery 6
7 RESEARCH AND TECHNOLOGY DEVELOPMENT - RTD projects 2008 RTD activities 4 Research Plans institutional funding (Ministry of Education, Youth and Sports MEYS) 11 national projects supported by ministries (esp. by Ministry of Industry and Trade, Ministry of Education, Youth and Sports - MEYS) 18 EU running projects (6/7 Framework Program), one project in the field of Security Research Integrated project CESAR (Cost Effective Small AiRcraft) - 39 participants from 14 European countries - VZLÚ is the project coordinator 7
8 6 th & 7 th FRAMEWORK PROGRAM 18 currently running EU projects EWA - European Wind Tunnel Association (Network of Excellence) / DLR FRIENDCOPTER - Environmentally Friendly Helicopter / VERTAIR IMAC-Pro - Industrializ. of Manuf. Technolog. for Composite Profiles for Aerosp. Applications ALCAS - Advanced and Low Cost Airframe Structures / AIRBUS+DASSAULT NACRE - New Aircraft Concepts Research / AIRBUS SADE - Smart High Lift Devices for Next Generation Wings TELFONA - TEsting for Laminar Flow On New Aircraft / AIRBUS UK CESAR - Cost Effective Small AiRcraft / VZLU, a.s. AVERT - Aerodynamic Validation of Emission Reducing, AIRBUS UK SimSAC - Simulating Aircraft Stability And Control Characteristics / KTH Cosee - Cooling Of Seat Electronic Box And Cabin Equipment / THALES MOJO - Modular Joints for Aircraft Composite Structures / EADS AirTN - Air Transport Net / DLR KATNET II - Key Aerodynamic Technologies to Meet the Vision 2020 Challenges / Airbus D SPOTSTIR - Devel. of a Hand Held Friction Stir Spot Weld. Gun for Auto. Body Repair /TWI TRIPS - Transport Infrastructures Protection System / ANSALDO FERROVIARI SPA AUTOW - Automated Preform Fabrication by Dry Tow Placement / NLR GREENWAKE - Wake Wortex Detection Systeme Incorporating an Atmospheric Hazard Map 8
9 L 159 ALCA RECENT LARGE PROJECTS 9
10 RECENT PROJECTS Ae 270 RECENT LARGE PROJECTS 10
11 DEPARTMENTS ASOCIATED WITH PROPULSION AND TURBOMACHINERY ENGINES DEPT. AERODYNAMICS DEPT. PROPELLERS DEPT.
12 Aerodynamics Dept. Bladed machinery research Planar cascade research facilicy Anular cascade research facilicy CFD turbomachinery simulations Wind tunel testing up to Mach 3.5
13 Propellers Dept. PROPELLERS AND FANS Research on rotating lifting surfaces Development and manufacture of A/C propellers Development of UAVs (Unmanned Aerial Vehicles) Development and manufacture of composite parts V510 propeller UAV (VTOL) 13 Wind tunnel fan
14 Engines Dept. Engineering for turbine engines Actual and recent projects: Design and development of reduction gearbox for smal turboprop engine TP100 (PBS) Design of experimental test rigs for: aeroengine gearbox turboprop engine planar combustion chamber segment Flexible Energetic System rebuild of the aeroengine for external heating and development of the regulation and safety systems. 14
15 Engines Dept. COMBUSTION THEORETICAL RESEARCH Actual projects: Research of small Combustor with Delivery Tubes. Project FT-TA5/073 reactor network simulation CFD RANS/FANS simulation (Flamelet, EDC) solvers OpenFOAM, Fluent fuel: methane
16 Engines Dept. COMBUSTION EXPERIMENTAL RESEARCH Actual projects: Planar combustor segment test rig for small gas turbine combustor CDT. PIV and PLIF measurements in cooperation with Czech Technical University. methane fuel Jet A1 fuel (preparing) Air mass flow up to 0.26 kg/s T max = 440K p max = 260kPa
17 Contacts VZLÚ,, a.s. Výzkumný a zkušebn ební letecký ústav,, a.s. Address: Beranových 130, Praha - Letňany any,, Contacts: Ing.. Josef Kašpar General Director ([email protected]( [email protected]) Ing. Victor Kučera Technical Director ([email protected]) Ing. Karel Paiger Business Development ([email protected]( [email protected]) Tel: Fax:
Aerospace Research at Brno University of Technology - Czech Rep. and Cooperation with European Universities and Institutions
Aerospace Research at Brno University of Technology - Czech Rep. and Cooperation with European Universities and Institutions Prof. Ing. Antonín n PíšP íštěk, Ph.D. Head of Institute Institute of Aerospace
Innovation Takes Off
Innovation Takes Off Clean Sky 2 General Information Day 28 November 2013, Lisbon SAT Transversal Activities Aniello Cozzolino, Piaggio Aero Industries Zdenek Mikulka, Evektor Innovation Takes Off European
MASTER OF ENGINEERING Mechanical Engineering Program
MASTER OF ENGINEERING Mechanical Engineering Program Note: On-line registration is available to CURRENT M.Eng. students only. NEW students are NOT permitted to register on-line for their first semester.
Part 0 - Classification and Surveys Classification and Surveys I-0 2016-01
Code Edition I - Ship Technology Part 0 - Classification and Surveys Classification and Surveys I-0 2016-01 Part 1 - Seagoing Ships Chapter 1 - Hull Structures I-1-1 2016-01 Chapter 1 - Hull Structures
UNCLASSIFIED UNCLASSIFIED
DSTO Support to Accident & Incident Investigations DSTO Melbourne DSTO in Defence DSTO structure DSTO at a glance Budget 2011-12: $440m 11 research divisions 2600 staff 7 sites across Australia DSTO Support
Ex Smiths 14% 20% 14% 17% Growing commercial installed base 1,747 -a) deliveries in 06 ~2,100 -b) deliveries in 07 Segment Profit
GE Aviation Aviation ($ in billions) $7.6 20% Ex Smiths 14% Business imperatives Winning technology Revenue $6.3 $1.4 $1.6 17% 14% Deep domain knowledge Growing commercial installed base 1,747 -a) deliveries
Aeronautical Testing Service, Inc. 18820 59th DR NE Arlington, WA 98223 USA. CFD and Wind Tunnel Testing: Complimentary Methods for Aircraft Design
Aeronautical Testing Service, Inc. 18820 59th DR NE Arlington, WA 98223 USA CFD and Wind Tunnel Testing: Complimentary Methods for Aircraft Design Background Introduction ATS Company Background New and
COALITION OF VOCATIONAL AND REGULAR AVIATION MAINTENANCE TECHNICIAN EDUCATION
COALITION OF VOCATIONAL AND REGULAR AVIATION MAINTENANCE TECHNICIAN EDUCATION Ting Hsien Lan 1 Abstract - The Aviation Maintenance Technician training programs are divided into, vocational and regular,
AVIATION MAINTENANCE TECHNOLOGY
HYBRID PROGRAM AVIATION MAINTENANCE TECHNOLOGY FIRST EVER FAA APPROVED AVIATION MAINTENANCE PROGRAM OFFERED PARTIALLY ONLINE OUR HISTORY W.G. Skelly, an oil magnate, founded Spartan as an aircraft manufacturing
GARDN II. Sylvain Cofsky, Executive Director. October 7, 2015
GARDN II Sylvain Cofsky, Executive Director October 7, 2015 Global context of Aerospace Industry 705 millions tonnes 3,1 billion 58,1 million 3.5 X Worldwide, flights produced 705 million tonnes of CO2
Aerodynamic Department Institute of Aviation. Adam Dziubiński CFD group FLUENT
Adam Dziubiński CFD group IoA FLUENT Content Fluent CFD software 1. Short description of main features of Fluent 2. Examples of usage in CESAR Analysis of flow around an airfoil with a flap: VZLU + ILL4xx
The UK National Aeronautics Technology Strategy
The UK National Aeronautics Technology Strategy Ray Kingcombe Head of Technology Aerospace, Marine & Defence Unit Department for Business, Innovation & Skills (BIS) Aerospace Industry in the UK UK aerospace
U.S. AIR FORCE CURRENT AS OF: 3 NOVEMBER 2009 PREVIOUS MOS (AFSC) CODE
Figure 5-13Military Occupational Specialty Codes Following are the updated, new, and the older codes for the U.S. Army, Air Force, Navy, Marine Corps, and Coast Guard enlisted personnel. Use the new codes
THE CFD SIMULATION OF THE FLOW AROUND THE AIRCRAFT USING OPENFOAM AND ANSA
THE CFD SIMULATION OF THE FLOW AROUND THE AIRCRAFT USING OPENFOAM AND ANSA Adam Kosík Evektor s.r.o., Czech Republic KEYWORDS CFD simulation, mesh generation, OpenFOAM, ANSA ABSTRACT In this paper we describe
TsAGI EU Scientific Cooperation National Contact Point Aeronautics
CENTRAL AEROHUYDRODYNAMIC INSTITUTE NAMED AFTER PROF. N.E. ZHUKOVSKY TsAGI EU Scientific Cooperation National Contact Point Aeronautics Central Aerohydrodynamic Institute (TsAGI) named after prof. N.E.
Delcam s Aerospace Heritage
Delcam s Aerospace Heritage With over 30 years CADCAM experience and now the world s largest specialist supplier of machining software, Delcam plc provides aerospace solutions for civil, military, rotary
Aeronautics AERO, FLTEC, ATCAD
Aeronautics AERO, FLTEC, ATCAD Degrees: A.S. Air Traffic Control A.S. Aircraft Dispatcher A.S. Airframe A.S. Combined Airframe and Powerplant A.S. Flight Technology A.S. Powerplant Certificates of Achievement:
aerodays2015 Brusseles, Belgium, October 20 22, 2015 Pavel WOLF Presentation of ESPOSA project
aerodays2015 Brusseles, Belgium, October 20 22, 2015 Pavel WOLF Presentation of ESPOSA project 41 partners (incl. 11 SMEs) 20 industrials, 11 research centres, 10 universities 15 countries : CZ(7), PL(5),
How To Reduce The Risk Of Innovation In Bombardier Aerospace
Bombardier Aerospace: Reducing the risk of Innovation A presentation to the McMaster University Advanced Manufacturing Summit November 2014 aunch dates Bombardier is committed to innovation through product
CFD: What is it good for?
CFD: What is it good for? Tom O Mahoney TNO Fluid Dynamics Introduction to CFD CFD - Computational Fluid Dynamics Computational the using of computers to simulate the physics of fluids Fluid Either gas
CLIQUEZ POUR MODIFIER LE STYLE DU TITRE
Thermoplastic and stabilized dry fiber with automated fiber placement Davy Leboucher, Ing. Dipl 1/28 I. Company Profile SUMMARY II. Current robotic fiber placement III. Thermosets and Aerospace Applications
THE DANIEL GUGGENHEIM SCHOOL OF AEROSPACE ENGINEERING
THE DANIEL GUGGENHEIM SCHOOL OF AEROSPACE ENGINEERING COLLEGE OF ENGINEERING AEROSPACE ENGI- ING Scott Horowitz, MS AE 1979, PhD AE 1982, enjoyed a successful career as a NASA astronaut, flying in four
Department of Aeronautics and Astronautics School of Engineering Massachusetts Institute of Technology. Graduate Program (S.M., Ph.D., Sc.D.
Department of Aeronautics and Astronautics School of Engineering Massachusetts Institute of Technology Graduate Program (S.M., Ph.D., Sc.D.) Field: Air-Breathing Propulsion Date: September 4, 2007 Introduction
Aeronautics. Airframe Maintenance Technician
Airframe Maintenance Technician Program Description Practical and theoretical knowledge in basic maintenance techniques, plus the special requirements of either airframe or powerplant work. Upon satisfactory
Simulation im Bereich der Windenergie ein Überblick. Dipl.-Ing. (FH) Nathalie Mattwich, CADFEM GmbH Dipl.-Phys. oec Stephan Hecht, ANSYS Germany GmbH
Simulation im Bereich der Windenergie ein Überblick Dipl.-Ing. (FH) Nathalie Mattwich, CADFEM GmbH Dipl.-Phys. oec Stephan Hecht, ANSYS Germany GmbH Agenda Uhrzeit Thema Referent 16:00 16:30 Simulation
SU MEJOR DECISIÓN. We have also involved in the cooperation with our government in R+D fields like NVG, missiles, UAV and Armoring.
TELSAT was established in 1.987 as a Colombian company. We have 22 years of experience in the field of high technology, research & development, construction of high security systems, telecommunications,
Programme Discussions Wissenschaftstag Braunschweig 2015 Laminarität für zukünftige Verkehrsflugzeuge
Programme Discussions Wissenschaftstag Braunschweig 2015 Kevin Nicholls, EIVW Prepared by Heinz Hansen TOP-LDA Leader, ETEA Presented by Bernhard Schlipf, ESCRWG Laminarität für zukünftige Verkehrsflugzeuge
Proposal for apprentice training in. South Africa. A cut above the rest, cause we train you best
Proposal for apprentice training in South Africa A cut above the rest, cause we train you best Why invest in ITC? ITC was founded in 2007. We have provided training for major airlines in Africa such as
KATnet Key Aerodynamic Technologies for Aircraft Performance Improvement
Fifth Community Aeronautical Days 2006, Vienna, Austria, 19-21 June 2006 Presented by Géza Schrauf Airbus With contributions of Burkhard Gölling and Norman Wood KATnet Key Aerodynamic Technologies for
COMPANY PROFILE YOUR PREFERRED PARTNER IN AEROSPACE TECHNOLOGIES SUBSIDIARIES. AERO Vodochody AEROSPACE a.s., Odolena Voda, Czech Republic
COMPANY PROFILE AERO Vodochody AEROSPACE a.s., Odolena Voda, Czech Republic - The largest aerospace manufacturer in the Czech Republic - One of the oldest aerospace manufacturers in the world (*1919) -
NUMERICAL ANALYSIS OF THE EFFECTS OF WIND ON BUILDING STRUCTURES
Vol. XX 2012 No. 4 28 34 J. ŠIMIČEK O. HUBOVÁ NUMERICAL ANALYSIS OF THE EFFECTS OF WIND ON BUILDING STRUCTURES Jozef ŠIMIČEK email: [email protected] Research field: Statics and Dynamics Fluids mechanics
General aviation & Business System Level Applications and Requirements Electrical Technologies for the Aviation of the Future Europe-Japan Symposium
General aviation & Business System Level Applications and Requirements Electrical Technologies for the Aviation of the Future Europe-Japan Symposium 26 March 2015 2015 MITSUBISHI HEAVY INDUSTRIES, LTD.
Smart Fixed Wing Aircraft Integrated Technology Demonstrator (SFWA-ITD): New Wing Concepts
Aerodays 2011 conference CleanSky Scenarios for 2020: Conceptual Aircraft Smart Fixed Wing Aircraft Integrated Technology Demonstrator (SFWA-ITD): New Wing Concepts Madrid, 30. March 01. April 2010 J.
PhD Program in Aerospace Engineering
PhD Program in Aerospace Engineering INTEGRATED PROJECT IN AEROSPACE VEHICLES AND SYSTEMS 1. Summary of the motivation for the Project Aerospace Engineering is a synthesis of advanced technologies: aerodynamics,
Jet Propulsion. Lecture-2. Ujjwal K Saha, Ph.D. Department of Mechanical Engineering Indian Institute of Technology Guwahati 1
Lecture-2 Prepared under QIP-CD Cell Project Jet Propulsion Ujjwal K Saha, Ph.D. Department of Mechanical Engineering Indian Institute of Technology Guwahati 1 Simple Gas Turbine Cycle A gas turbine that
Aerospace Systems. Industry Spotlight
4 Aerospace Systems Engineering simulation is an integral part of the development process for critical components and major subsystems on today s aircraft from nose to tail. By Simon Pereira Senior Application
O.F.Wind Wind Site Assessment Simulation in complex terrain based on OpenFOAM. Darmstadt, 27.06.2012
O.F.Wind Wind Site Assessment Simulation in complex terrain based on OpenFOAM Darmstadt, 27.06.2012 Michael Ehlen IB Fischer CFD+engineering GmbH Lipowskystr. 12 81373 München Tel. 089/74118743 Fax 089/74118749
Engineering Technology Division xxx
7 xxx The offers a wide range of programs. These programs prepare students to successfully move to challenging and critical positions requiring technical expertise in a modern and evolving world. Students
Faculty of Aerospace Engineering
Delft University of Technology Dr. ir. Roeland De Breuker and Dr. Arvind Rao 20-3-2013 Delft University of Technology Challenge the future Delft University of Technology General Information Founded in
Engineering Software Manufacturing Training. The Experts in Turbomachinery
The Experts in Turbomachinery Improving the design and manufacturability of compressors, pumps, gas turbines, steam turbines, fans, blowers, and turbochargers. Engineering Software Manufacturing Training
EDUCATION IS THE KEY TO SUCCESS Aviation Maintenance Training School (AMT School) www.amtmiami.com www.amtschool.com
A&P Oral and Practical Exam Guaranteed Preparation Course 1-Week (7 Days) Oral and Practical Exam Preparation One Price with No Hidden Fees (see web site for pricing) (Includes a Set of 3 ASA Q&A Books
Graduate Programs in Mechanical and Aerospace Engineering
Graduate Programs in Mechanical and Aerospace Engineering Space System Engineering Aerodynamics & Computational Fluid Dynamics (CFD) Aerospace Structures and materials Dynamics, Vibration and Controls
Relevance of Modern Optimization Methods in Turbo Machinery Applications
Relevance of Modern Optimization Methods in Turbo Machinery Applications - From Analytical Models via Three Dimensional Multidisciplinary Approaches to the Optimization of a Wind Turbine - Prof. Dr. Ing.
Circulation Control NASA activities
National Aeronautics and Space Administration Circulation Control NASA activities Dr. Gregory S. Jones Dr. William E. Millholen II Research Engineers NASA Langley Research Center Active High Lift and Impact
Computational Fluid Dynamics
Aerodynamics Computational Fluid Dynamics Industrial Use of High Fidelity Numerical Simulation of Flow about Aircraft Presented by Dr. Klaus Becker / Aerodynamic Strategies Contents Aerodynamic Vision
Introduction to Flight
Introduction to Flight Sixth Edition John D. Anderson, Jr. Curator for Aerodynamics, National Air and Space Museum Smithsonian Institution Professor Emeritus University of Maryland Boston Burr Ridge, IL
Aerion and Airbus Group, Inc. Announce New Agreement, Expanded Collaboration
P R E S S I N F O R M A T I O N Aerion and Airbus Group, Inc. Announce New Agreement, Expanded Collaboration More North American-based Airbus Group, Inc. resources made available to bring the supersonic
Advanced Systems & Equipment
Advanced Systems & Equipment Flotation Systems Utilising extensive experience gained from over 70 years of innovation, GKN Aerospace - Portsmouth is a leading supplier of inflatable recovery systems and
University of Dayton Graduate School Aerospace Engineering
University of Dayton Graduate School The University of Dayton offers more than 50 disciplinary and cross-disciplinary advanced degree programs, making it easy for you to find a program to meet your needs.
Precision components from start to finish. Excellence. in performance-critical machining & fabrications
Precision components from start to finish Excellence in performance-critical machining & fabrications Leading precision machining technology... Fully integrated solutions Facilities and capabilities The
POWER WITH PURPOSE. Delivering innovative end-to-end electrical power systems integration
POWER WITH PURPOSE Delivering innovative end-to-end electrical power systems integration The industry s toughest challenges call for smarter innovations With airspace under increasing demand, the future
Student Academic Achievement Committee (SAAC) Standardized Report Form
Student Academic Achievement Committee (SAAC) Standardized Report Form INTRODUCTION Program/Discipline Title: Aviation Maintenance Technology Time Period: spring 2011, summer 2011, fall 2011 Program goals,
Program Update June 2015. G500, G600 Program Update 06.15
Program Update June 2015 G500, G600 Program Update 06.15 All-New Gulfstream G500 and G600 All new, best-in-class aircraft that build upon Gulfstream s technology leadership Unmatched high-speed range capability
GUJARAT TECHNOLOGICAL UNIVERSITY
Subject Code Subject Name Date Time Branch 01: Aeronautical Engineering 160101 Aerodynamics-II 24-05-2013 10:30 To 01:00 160102 Fundamentals of Jet Propulsion 27-05-2013 10:30 To 01:00 160103 Vibration
EADS Corporate Technical Office. 81663 Munich Germany 12 rue Pasteur 92152 Suresnes Cedex France. Contact: innovationworks@eads.
The E-Fan demonstrator is part of EADS on-going hybrid and electrical propulsion system research, which has seen hybrid concept studies for a full-scale helicopter, the successful development of a Cri-Cri
KINETIC ENERGY RECOVERY SYSTEM BY MEANS OF FLYWHEEL ENERGY STORAGE
ADVANCED ENGINEERING 3(2009)1, ISSN 1846-5900 KINETIC ENERGY RECOVERY SYSTEM BY MEANS OF FLYWHEEL ENERGY STORAGE Cibulka, J. Abstract: This paper deals with the design of Kinetic Energy Recovery Systems
New England Defense Contracting Trends
New England Defense Contracting Trends 2006 2010 Prepared for the Defense Technology Initiative University of Massachusetts Donahue Institute Economic and Public Policy Research Unit October, 2011 About
DCTA/IAE Aeroelasticity Branch Theoretical and Experimental Aeroelasticity Activities
DCTA/IAE Aeroelasticity Branch Theoretical and Experimental Aeroelasticity Activities Roberto GIL Annes da Silva Research Engineer - DCTA/IAE/ALA-L Adjunct Professor - ITA/IEA Outline Applied Aeroelasticity
DRAFT (Public comments phase August 2006) Date: XX/XX/XX. Initiated by: ANE-110
(Public comments phase August 2006) Advisory Circular Subject: PROPOSED DRAFT Turbine Engine Repairs and Alterations Approval of Technical and Substantiation Data Date: XX/XX/XX Initiated by: ANE-110 AC
Department of Aerospace Engineering Indian Institute of Science Bangalore
Department of Aerospace Engineering Indian Institute of Science Bangalore Brief Outline of Department The department of Aerospace Engineering is one of the oldest departments in the country encompassing
The Art of Safe Landings
The Art of Safe Landings Reliable. From landing to take-off. Over 100 years of experience... In 1911, 21 year-old Anthony Fokker flew his home-built aircraft over the city of Haarlem. In 1919, one of the
THM Gas Turbines Heavy duty gas turbines for industrial applications
THM Gas Turbines THM Gas Turbines Heavy duty gas turbines for industrial applications Combined advantages The THM 1304 heavy duty gas turbine family consists of two members with ISO power outputs of 10,500
Ready for Liftoff. Recent technology developments from ANSYS help aerospace engineers address pressing engineering challenges.
ANALYSIS TOOLS Ready for Liftoff Recent technology developments from ANSYS help aerospace engineers address pressing engineering challenges. T he global aerospace industry faces many critical challenges
DEPARTMENT OF TRANSPORTATION FEDERAL AVIATION ADMINISTRATION 8000.84 SUBJ: PROCEDURES TO ACCEPT INDUSTRY-DEVELOPED TRAINING FOR LIGHT-SPORT REPAIRMEN
ORDER DEPARTMENT OF TRANSPORTATION FEDERAL AVIATION ADMINISTRATION 8000.84 9/27/04 SUBJ: PROCEDURES TO ACCEPT INDUSTRY-DEVELOPED TRAINING FOR LIGHT-SPORT REPAIRMEN 1. PURPOSE. This order assigns the Light-Sport
European Aviation Safety Agency
European Aviation Safety Agency EASA TYPE-CERTIFICATE DATA SHEET Number: E.070 Issue: 05 Date: 16 November Type: GE Aviation Czech M601/H80 series turboprop engines Models: M601D M601D-1 M601D-2 M601D-11
Basics of vehicle aerodynamics
Basics of vehicle aerodynamics Prof. Tamás Lajos Budapest University of Technology and Economics Department of Fluid Mechanics University of Rome La Sapienza 2002 Influence of flow characteristics on the
Types of Engineering Jobs
What Do Engineers Do? Engineers apply the theories and principles of science and mathematics to the economical solution of practical technical problems. I.e. To solve problems Often their work is the link
F1 Fuel Tank Surging; Model Validation
F1 Fuel Tank Surging; Model Validation Luca Bottazzi and Giorgio Rossetti Ferrari F1 team, Maranello, Italy SYNOPSIS A Formula One (F1) car can carry more than 80 kg of fuel in its tank. This has a big
Computational Fluid Dynamics Research Projects at Cenaero (2011)
Computational Fluid Dynamics Research Projects at Cenaero (2011) Cenaero (www.cenaero.be) is an applied research center focused on the development of advanced simulation technologies for aeronautics. Located
CFD SIMULATION OF NATURAL GAS COMBUSTION AND IST APPLICATION TO TUNNEL KILN FIRING
CFD SIMULATION OF NATURAL GAS COMBUSTION AND IST APPLICATION TO TUNNEL KILN FIRING. R. Obenaus-Emler University of Leoben Contents 1. Intoduction to combustion models in OpenFOAM 2. The Flamelet-Model
Current Challenges in UAS Research Intelligent Navigation and Sense & Avoid
Current Challenges in UAS Research Intelligent Navigation and Sense & Avoid Joerg Dittrich Institute of Flight Systems Department of Unmanned Aircraft UAS Research at the German Aerospace Center, Braunschweig
Unit 96: Marine Propulsion Power Plant
Unit 96: Marine Propulsion Power Plant Unit code: R/503/1756 QCF Level: 5 Credit value: 15 Aim This unit provides learners with an understanding of marine propulsion power plant. Learners will also gain
BOARD OF HIGHER EDUCATION REQUEST FOR COMMITTEE AND BOARD ACTION
BOARD OF HIGHER EDUCATION REQUEST FOR COMMITTEE AND BOARD ACTION COMMITTEE: Academic Affairs NO: AAC 15-24 COMMITTEE DATE: January 20, 2015 BOARD DATE: March 10, 2015 APPLICATION OF CAPE COD COMMUNITY
Aerospace in Washington State. Impact Washington NIST-MEP Affiliate
Aerospace in Washington State Impact Washington NIST-MEP Affiliate Washington Aerospace Fast Facts Near 100-year legacy Over 1,350 companies WASHINGTON STATE 132,500+ in aerospace related employment 94,200
INVESTMENT OPPORTUNITIES. Aerospace Industry in the Czech Republic
INVESTMENT OPPORTUNITIES Aerospace Industry in the Czech Republic Contents Welcome to the Czech Aerospace 1 Labour Availability and Skills 2 Professional Groups 3 Research and Development 4 Join the Global
Engineering & Technology High School. Course Description
& Technology High School The Following Courses will be offered for the High School program under & Technology for the year 2013 & 14 year. These courses are the First Phase for the development of new Pathways,
Lift and Drag on an Airfoil ME 123: Mechanical Engineering Laboratory II: Fluids
Lift and Drag on an Airfoil ME 123: Mechanical Engineering Laboratory II: Fluids Dr. J. M. Meyers Dr. D. G. Fletcher Dr. Y. Dubief 1. Introduction In this lab the characteristics of airfoil lift, drag,
Research Methodology Part III: Thesis Proposal. Dr. Tarek A. Tutunji Mechatronics Engineering Department Philadelphia University - Jordan
Research Methodology Part III: Thesis Proposal Dr. Tarek A. Tutunji Mechatronics Engineering Department Philadelphia University - Jordan Outline Thesis Phases Thesis Proposal Sections Thesis Flow Chart
AEROSPACE ENGINEERING SERIES, GS-0861
TS-124 May 1993 General Schedule Position Classification Flysheet AEROSPACE ENGINEERING SERIES, GS-0861 Theodore Roosevelt Building 1900 E Street, NW Washington, DC 20415-8330 Classification Programs Division
HydrOcean, your numerical hydrodynamic partner
HydrOcean, your numerical hydrodynamic partner Contact: Luke Berry, Account Manager [email protected] Tel: +33 (0)2 40 20 60 94 Who We Are Overview Founded in 2007 by E. Jacquin Spinoff from Ecole
TYPE-CERTIFICATE DATA SHEET
TYPE-CERTIFICATE DATA SHEET EASA TC E.036 for Trent 1000 series engines Certificate Holder Rolls-Royce plc PO Box 31 Derby DE24 8BJ United Kingdom For Models: Trent 1000-A Trent 1000-A2 Trent 1000-AE Trent
Computational Modeling of Wind Turbines in OpenFOAM
Computational Modeling of Wind Turbines in OpenFOAM Hamid Rahimi [email protected] ForWind - Center for Wind Energy Research Institute of Physics, University of Oldenburg, Germany Outline Computational
Innovation Takes Off
Innovation Takes Off Clean Sky 2 Information Day dedicated to the CFP04 ITD Systems Brussels, June 2016 Innovation Takes Off From Clean Sky towards Clean Sky 2 Systems ITD follows and expands Clean Sky
The Aircraft Engine Design Project Fundamentals of Engine Cycles
GE Aviation The Aircraft Engine Design Project Fundamentals of Engine Cycles Spring 2009 Ken Gould Phil Weed 1 GE Aviation Technical History I-A - First U.S. jet engine (Developed in Lynn, MA, 1941) U.S.
User orientated simulation strategy to analyse large drive trains in SIMPACK
User orientated simulation strategy to analyse large drive trains in SIMPACK SIMPACK User Meeting / Dipl.-Ing. Thomas Hähnel / Dipl.-Ing. Mathias Höfgen 21. / 22. November 2007 Content Motivation, state
CZECH AIRCRAFT INDUSTRY Association of the Aviation Manufacturers of the Czech Republic. www.alv-cr.cz
CZECH AIRCRAFT INDUSTRY Association of the Aviation Manufacturers of the Czech Republic HISTORY First companies established in 1919- AERO, LETOV, AVIA High reputation in the period between the 1th and
FSI LOGO Revision 1.0
FSI LOGO Revision 1.0 HELICOPTER OPERATIONS MODERN HELICOPTERS MODERN HELICOPTERS MODERN HELICOPTERS MODERN HELICOPTERS HUMS Ground Station Overview Health and Usage Monitoring System Ground Station Help
In-flight Evaluation of Avionic Systems
In-flight Evaluation of Avionic Systems Henk Jentink National Aerospace Laboratory NLR, Flight Test Seminar, 6 April 2011, Hamburg Nationaal Lucht- en Ruimtevaartlaboratorium National Aerospace Laboratory
Reach for the skies. The Aerospace Growth Partnership. Industry and government working together to secure the future for UK aerospace
Reach for the skies The Aerospace Growth Partnership Industry and government working together to secure the future for UK aerospace Maintaining our leadership as an aerospace nation The UK has a great
Volume 2 ASSOCIATION OF THE AEROSPACE MANUFACTURERS OF THE CZECH REPUBLIC. (Selected member companies focusing on space activities)
Volume 2 ASSOCIATION OF THE AEROSPACE MANUFACTURERS OF THE CZECH REPUBLIC (Selected member companies focusing on space activities) CzechTrade prepared for you a series of catalogues mapping the Czech Space
3. Prescribe boundary conditions at all boundary Zones:
CFD ANALYSIS OF CHANGE IN SHAPE OF SUCTION MANIFOLD TO IMPROVE PERFORMANCE OF THE CENTRIFUGAL PUMP ABSTRACT Mr. Suraj K. Patil PG Student, Department of Mechanical Engineering /BIGCE, Solapur University,