MTB DRIVETRAIN. Frame Fit Specifications

Transcription

1 2015 MTB DRIVETRAIN Frame Fit Specifications

2 TABLE OF CONTENTS 1X11 & X01 DH...4 REAR DERAILLEURS X 11 & X01 DH REAR DERAILLEURS X 11 & X01 DH REAR DERAILLEURS...8 CHAINSTAY CLEARANCE X 11 & X01 DH CHAINSTAY CLEARANCE...10 CRANKSETS XX1 CRANKSETS XX1 CRANKSETS FOR FAT BIKES X01 CRANKSETS X-SYNC X01 DH CRANKSETS [1X7] X CRANKSETS X & X CRANKSETS X CRANKSETS FOR FAT BIKES XX FRONT DERAILLEURS XX FRONT DERAILLEURS - LOW & HIGH CLAMP XX FRONT DERAILLEURS - LOW & HIGH CLAMP XX FRONT DERAILLEURS - LOW DIRECT MOUNT XX FRONT DERAILLEURS - LOW DIRECT MOUNT XX FRONT DERAILLEURS - LOW DIRECT MOUNT XX FRONT DERAILLEURS - HIGH DIRECT MOUNT XX FRONT DERAILLEURS - HIGH DIRECT MOUNT...27 XX FRONT DERAILLEURS - HIGH DIRECT MOUNT CRANKSETS...29 XX CRANKSETS X0 / X9 / X7 / X FRONT DERAILLEURS...32 X0 / X9 / X7 / X5 FRONT DERAILLEURS - 10 SPEED OVERVIEW X0 / X9 / X7 / X5 FRONT DERAILLEURS - LOW CLAMP MOUNT X0 / X9 / X7 / X5 FRONT DERAILLEURS - LOW CLAMP MOUNT X0 / X9 / X7 / X5 FRONT DERAILLEURS - LOW DIRECT MOUNT X0 / X9 / X7 / X5 FRONT DERAILLEURS - LOW DIRECT MOUNT...37 X0 / X9 / X7 / X5 FRONT DERAILLEURS - LOW DIRECT MOUNT X0 / X9 / X7 / X5 FRONT DERAILLEURS - HIGH CLAMP MOUNT X0 / X9 / X7 / X5 FRONT DERAILLEURS - HIGH CLAMP MOUNT...40 X0 / X9 / X7 / X5 FRONT DERAILLEURS - HIGH CLAMP MOUNT X0 / X9 / X7 / X5 FRONT DERAILLEURS - HIGH DIRECT MOUNT X0 / X9 / X7 / X5 FRONT DERAILLEURS - HIGH DIRECT MOUNT X0 / X9 / X7 / X5 FRONT DERAILLEURS - HIGH DIRECT MOUNT...44 X0 / X9 / X7 / X5 FRONT DERAILLEURS - HIGH DIRECT MOUNT X0 / X9 / X7 / X5 FRONT DERAILLEURS - MID DIRECT MOUNT... 46

3 REAR DERAILLEURS...47 X0 / X9 / X7 / X5 REAR DERAILLEURS X0 / X9 / X7 / X5 REAR DERAILLEURS CRANKSETS X0 CRANKSETS [2X10] X0 CRANKSETS [3X10] X9 CRANKSETS [2X10] X9 CRANKSETS [2X10] FOR FAT BIKES X9 CRANKSETS [3X10] X7 CRANKSETS [2X10] X7 CRANKSETS [3X10]...57 X5 CRANKSETS [2X10] X5 CRANKSETS [2X10] FOR FAT BIKES X5 CRANKSETS [3X10]...60 BOTTOM BRACKETS PRESSFIT PRESSFIT 89.5 & 92 GXP MTB BOTTOM BRACKET PRESSFIT & 107 GXP MTB BOTTOM BRACKET PRESSFIT 121 GXP MTB BOTTOM BRACKET... 66

4 4 1X11 & X01 DH

5 Important information about X01 DH compatibilty This document is intended to communicate general frame fit guidelines for the X01 DH group set. For more detailed information, please contact your SRAM Account Manager. The X01 DH group set is only compatible with X01 DH designed components from SRAM. The X01 DH cassette is exclusively compatible with the SRAM XD Driver Body.

6 Rear Derailleurs

7 1 x 11 & X01 DH Rear Derailleurs Rear Derailleur Hanger Specifications L X A R1 R2 T Actuation Ratio mm 6-10 mm mm mm mm (max) mm 7-9 mm Rear Derailleur Hanger R2 R1 A L 90 To center of bottom bracket mm T T T 35 mm min Centerline R/D bolt T X 7 Rear Derailleurs

8 1 x 11 & X01 DH Rear Derailleurs 66 mm 13 mm REAR DERAILLEUR HANGER M10x1-6H ø10.5 mm max 90.0 o Restricted area for rear derailleur* R 22 R 150 Connection Line to BB Shell *For proper rear dearailleur function, this area must be kept clear. Pivots, chainstays, or other components must not intrude. 8 Rear Derailleurs

9 Chainstay Clearance

10 1 x 11 & X01 DH Chainstay Clearance 15.5 mm on 10T cog To center of bottom bracket 10T cog* *SRAM 1x11 cassettes are exclusively compatible with the SRAM XD Driver Body. For a list a companies using the SRAM XD Driver Body, go to Chainstay Clearance

11 Cranksets 11

12 XX1 Cranksets Crankset Frame Clearance Information Chain Ring L1 L2 L3 L4 W1 W2 W3 CL (chainline) mm Crankset [1x11] mm mm 27 mm 41 mm mm mm mm 195 mm 45.5 mm 46.5 mm 64.5 mm [Q156] 70.5 mm [Q168] 49 mm Q-factor : Q156, Q168 Bottom Bracket Type(s) : GXP : BB30 : Pressfit 30 : Pressfit GXP MTB L1 W3 W2 W1 L2 CL L3 L4 W3 12 Cranksets

13 XX1 Cranksets for fat bikes Crankset Frame Clearance Information Chain Ring L1 L2 L3 L4 W1 W2 W3 CL (chainline) Crankset [1x11] mm 27 mm 41 mm mm 195 mm 63.5 mm 64.5 mm Bottom Bracket Type(s) : 86.5 mm (NDS) 89.5 mm (DS) 66.5 mm Q-factor : Q201 GXP : Pressfit GXP MTB L1 W3 W2 W1 L2 CL L3 L4 W3 13 Cranksets

14 X01 Cranksets Crankset Frame Clearance Information Chain Ring L1 L2 L3 L4 L5 W1 W2 W3 W4 CL (chainline) mm 69.5 mm mm 73.5 mm Crankset [1x11] mm 40 mm 72.5 mm 77.5 mm mm 81.5 mm mm 85.5 mm 195 mm 45.5 mm 46.5 mm 70.5 mm [Q168] 55.5 mm 49 mm Q-factor : Q168 Bottom Bracket Type(s) : GXP : BB30 : Pressfit 30 : Pressfit GXP MTB L1 W3 W4 W2 W1 L2 CL L3 L4 L5 W3 14 Cranksets

15 X-SYNC X01 DH Cranksets [1x7] CRANKSET FRAME CLEARANCE INFORMATION Chain Ring L1 L2 L3 L5 W1 W2 W3 CL (chainline) mm mm 23 mm 40 mm mm mm 190 mm [170 mm crank arm] 55 mm 53 mm 78 mm 55 mm Q-factor : Q181 Bottom Bracket Type(s) : GXP : BB30 : PressFit 30 : PressFit GXP MTB L1 W3 W2 W1 L2 CL L3 L5 W3 15 Cranksets

16 X Cranksets Crankset Frame Clearance Information Chain Ring L1 L2 L3 L4 L5 W1 W2 W3 W4 CL (chainline) mm 69.5 mm mm 73.5 mm Crankset [1x11] mm 40 mm 72.5 mm 77.5 mm mm 81.5 mm mm 85.5 mm 201 mm 43.5 mm 46.5 mm 72 mm 55.5 mm 49 mm Q-factor : Q168 Bottom Bracket Type(s) : GXP : BB30 : Pressfit 30 : Pressfit GXP MTB L1 W3 W4 W2 W1 L2 CL L3 L4 L5 W3 16 Cranksets

17 X & X Cranksets Crankset Frame Clearance Information Chain Ring L1 L2 L3 L4 W1 W2 W3 CL (chainline) mm mm Crankset [1x11] mm 40 mm 72.5 mm mm mm 192 mm 49.5 mm 47.2 mm 72 mm 49 mm Q-factor : Q168 Bottom Bracket Type(s) : GXP : BB30 : Pressfit 30 : Pressfit GXP MTB L1 W3 W2 W1 L2 CL L3 L4 W3 17 Cranksets

18 X Cranksets for fat bikes Crankset Frame Clearance Information Chain Ring L1 L2 L3 L4 W1 W2 W3 CL (chainline) Crankset [1x11] mm 27 mm 41 mm mm 192 mm 67.0 mm 64.5 mm Bottom Bracket Type(s) : 88.0 mm (NDS) 89.5 mm (DS) 66.5 mm Q-factor : Q203 GXP : Pressfit GXP MTB L1 W3 W2 W1 L2 CL L3 L4 W3 18 Cranksets

19 XX XX demands precise frame fit specifications that are unique to XX.

20 Front Derailleurs

21 XX Front Derailleurs - Low & High Clamp Clamp/Body Position* Tire Clearance Chain Ring A B C D E F Low Clamp 39T 61 mm 76 mm 100 mm - 42T 67 mm 82 mm 106 mm 40 mm 33 mm α = High Clamp 39T 114 mm 129 mm 79 mm 42T 120 mm 135 mm 85 mm - Top Pull = 25 Bottom Pull = mm 7 mm max 17 mm max * Be sure to leave adequate clearance between bottle cage mounts and front derailleur clamp. 420 mm min 75 mm 110 mm Clamp Diameter Rear Capacity Front Derailleur Frame Compatibility and Capacity Information Index Cable Routing Chain Stay Angle (α) Chain Line Material Low Clamp High Clamp 31.8 mm (use adaptor) 34.9 mm 38.2 mm 31.8 mm 34.9 mm 38.2 mm 10 speed Yes Top Pull or Bottom Pull mm Clamp - Forged Aluminum Cage - Steel Clamp - Steel Cage - Steel 21 Front Derailleurs

22 XX Front Derailleurs - Low & High Clamp Bottle cage mounts High Clamp Low Clamp A B A B A B D 74 E F C C 22 Front Derailleurs

23 XX Front Derailleurs - Low Direct Mount Mounting Hole Position (Swing Arm Fully Extended) θ A B C 68 mm BB shell width D 73 mm BB shell width E* Front Derailleur Clearance (Swing Arm Fully Compressed) F G d max * Low Direct Mount Type S1 45.5º±1º S2 S3 66º-69º (θ = α) 48.9 mm ± mm ± mm ± mm ± mm ±0.2 5 mm ± mm ± mm ± mm ± mm ± mm ± mm 45 mm 37 mm 38.2 mm *Dimension can be found on page ±0.1 mm Low Direct Mount Type : S1 θ A G F B C Low Direct Mount Type : S2 + S3 θ A G C F 63±0.2 mm B 23 Front Derailleurs

24 XX Front Derailleurs - Low Direct Mount H Front Derailleur Cable Routing - Bottom Pull (Swing Arm Fully Extended) I K Chainring Size 39T 42T 45T Thread Dimension Tire Clearance δ ε L M N Low Direct Mount 8 mm 35 mm 94 mm 100 mm 106 mm 10.5º max 10.5º max M5.0x0.8-6H 40 mm 33 mm E D 68 mm or 73 mm I δ H Low Direct Mount α Front Derailleur Cable Mounting Point Bottom Pull L K M d max Front Derailleur Cable Mounting Point Bottom Pull N ε 24 Front Derailleurs

25 XX Front Derailleurs - Low Direct Mount Front Derailleur Frame Compatibility and Capacity Information Rear Capacity Index Cable Routing Chain Stay Angle (α) Chain Line Material Low Direct Mount 10 speed Yes Top Pull or Bottom Pull mm Body - Forged Aluminum Cage - Steel Low Direct Mount α = mm max 17 mm max 420 mm min 75 mm 110 mm 25 Front Derailleurs

26 XX Front Derailleurs - High Direct Mount Front Derailleur - High Direct Mount Frame Compatibility and Capacity Information Chainring Combination Rear Capacity Index Cable Routing Chain Stay Angle α Chainline 39/26 42/28 10 speed Yes Top Pull Bottom Pull mm 36/22 38/24 10 speed Yes Top Pull Bottom Pull mm Cable housing Compact body Top pull Compact body Bottom pull 26 Front Derailleurs

27 XX Front Derailleurs - High Direct Mount Chainring Combination 36/22 High Direct Mount Dimensions G (mm) Cable Pull A C D E F α = 66 α = 69 H Top Bottom 155 mm Compact 84 mm 164 mm Compact 34 mm 33 mm mm 7 mm A 38/24 Top Bottom 155 mm Compact 88 mm 169 mm Compact 34 mm 33 mm mm 7 mm D 39/26 Top Bottom 155 mm Compact 82 mm 163 mm Compact 34 mm 33 mm mm 7 mm 42/28 Top Bottom 155 mm Compact 88 mm 169 mm Compact 34 mm 33 mm mm 7 mm 26 mm 43.5 mm (fat bike) E 30 mm α = H F 17 mm max C 7 mm max G mm [36/22, 38/24] 77 mm [39/26, 42/28] 420 mm min 75 mm 110 mm Front Derailleurs

28 XX Front Derailleurs - High Direct Mount 7.2 ±0.1 25±0.5 P4 - P3 0.5 P3 26 M6x1-6H 19± ±0.5 (73 BB shell) 8±0.5 (68 BB shell) L 11±0.5 L ±0.1 14±0.5 SECTION L-L A Thread Depth: 10 mm and more P P2 - P1 0.5 P1 P ±0.5 (73 BB shell) 34±0.5 (68 BB shell) 28 Front Derailleurs

29 Cranksets

30 XX Cranksets Crankset Frame Clearance Information Chainring Combination L1 L2 L3 L4 W1 W2 W3 W4 W4 W4 Crankset 39/26 55 mm 81 mm 31 mm 42/28 60 mm 87 mm 190 mm (175 mm crank arm length) 43.5 mm 44.5 mm 52.5 mm 65.7 mm 69.5 mm 70.5 mm Q-factor Q156 Q164 Q166 Bottom Bracket Type(s) GXP BB30 PressFit 30 PressFit GXP BB30 PressFit 30 GXP PressFit GXP L1 W4 W1 W2 W3 L2 L3 L4 W4 30 Cranksets

31 X0 / X9 / X7 / X5

32 Front Derailleurs

33 X0 / X9 / X7 / X5 Front Derailleurs - 10 Speed Overview Front Derailleur Notes: Common for all Front Derailleurs Leave adequate clearance between bottle cage mounts and front derailleur clamp. Be sure to consider the full travel range for suspension frames. α = Chainstay angle (angle between seat tube and chainstay). DP = Dual pull link TP = Top pull only link BP = Bottom pull only link Model X0 Type 2x10 Low Clamp Mount Low Direct Mount High Clamp Mount High Direct Mount Chainring Combination Ø 31.8 Ø 34.9 Ø 38.2 S1 S3 Ø 31.8 Ø 34.9 Ø /28 39/26 38/24 36/22 TP BP 1 TP BP 1 TP BP 1 TP BP TP BP TP BP TP BP - TP BP TP BP - TP BP - TP BP Mid Direct Mount DP 1 DP 1 DP 1 DP - - DP TP DP TP DP DP TP BP 34/22 TP BP TP BP - - TP BP TP BP TP BP - - TP BP - 3x10 44/33/22 TP BP TP BP TP BP TP BP TP BP DP TP DP TP DP DP TP - - X9 2x10 42/28 39/26 38/24 36/22 TP BP 1 TP BP TP BP TP BP TP BP TP BP DP 1 DP 1 DP 1 DP x10 44/33/22 TP BP TP BP - TP BP TP BP DP DP DP DP - - X7 2x10 42/28 DP DP DP 1 DP 1 - DP TP DP TP - DP /26 DP DP 38/24 - DP DP DP - DP DP - DP TP - 36/22 DP DP DP 34/22 DP DP - - DP DP DP - DP - 3x10 44/33/22 DP DP - DP DP DP DP - DP TP - - X5 2x10 42/28 - DP DP 1 DP 1-39/26 - DP DP DP - - DP - 38/24 - DP /22 - DP DP DP - - DP - 34/22 DP DP - - DP DP DP - DP - - 3x10 44/33/22 DP 1 DP DP DP DP - DP Includes 48/32 33 Front Derailleurs

34 X0 / X9 / X7 / X5 Front Derailleurs - Low Clamp Mount Front Derailleur - Low Clamp Mount Frame Compatibility and Capacity Information Clamp Diameter Rear Capacity Index Cable Routing Chainstay Angle (α 3 ) Chainline 2x mm [w/ adapter] 34.9 mm 38.2 mm 10 speed Yes Top Pull Bottom Pull Dual Pull mm [34/22, 36/22, 38/24] 49.5 mm [39/26, 42/28] mm [w/ adapter] 34.9 mm 38.2 mm 10 speed Yes Top Pull Bottom Pull Dual Pull mm [44/33/22] Top Pull Bottom Pull Dual Pull 34 Front Derailleurs

35 X0 / X9 / X7 / X5 Front Derailleurs - Low Clamp Mount Low Clamp Mount Dimensions Chainring Combination Cable Pull A B D E F α = 66 α = 69 34/22 36/22 38/24 39/26 42/28 44/33/22 Top and Botton Pull Dual Pull Top and Bottom Pull Dual Pull Top and Bottom Pull Dual Pull Top and Bottom Pull Dual Pull Top and Bottom Pull Dual Pull Top and Bottom Pull Dual Pull 62 mm 82 mm 107 mm 48/42 mm 65 mm 22 mm 26 mm 44 mm 58 mm 78 mm 103 mm 48 mm 70 mm 18 mm 21 mm 46 mm 62 mm 82 mm 107 mm 48 mm 70 mm 22 mm 26 mm 46 mm 56 mm 76 mm 101 mm 48 mm 74 mm 16 mm 21 mm 46 mm 62 mm 82 mm 107 mm 48 mm 74 mm 22 mm 27 mm 46 mm 65 mm 85 mm 110 mm 48 mm 46 mm G 89 mm 17 mm 22 mm Bottle cage mounts B A mm cable stop α = E 17 mm max F 7 mm max G 35 A B D 31 mm 420 mm > 75 mm 110 mm Front Derailleurs

36 X0 / X9 / X7 / X5 Front Derailleurs - Low Direct Mount Low Direct Mount Front Derailleur - Low Direct Mount Frame Compatibility and Capacity Information Rear Capacity Index Cable Routing Chainstay Angle (α 3 ) Chainline 10 speed Yes Top Pull Bottom Pull Dual Pull mm [34/22, 36/22, 38/24] 49.5 mm [39/26, 42/28] 51 mm [44/33/22] Top Pull Bottom Pull Dual Pull S3 - Standard 3 x mm [44/33/22] Dual Pull S3 - Standard 2 x mm [39/26, 42/28] Dual Pull S1 - Standard 2 x mm [34/22, 36/22, 38/24] Dual Pull 36 Front Derailleurs

37 X0 / X9 / X7 / X5 Front Derailleurs - Low Direct Mount Mounting Hole Position - Swing Arm Fully Extended Low Direct Mount S1 S3 A B C 48.9 mm ± mm ± mm ± mm ± mm ±0.2 5 mm ±0.05 D (BB shell width) 68 mm 73 mm 14.8 mm ± mm ± mm ± mm ±0.15 E F P a/θ - 5 mm ± mm 48 mm θ =45.5º±1º α = 66º - 69º 5 mm 68 mm or 73 mm D 22.7±0.1 mm Low Direct Mount Type : S1 θ A P F B C Low Direct Mount Type : S3 a A 63±0.2 mm B C P F 37 Front Derailleurs

38 X0 / X9 / X7 / X5 Front Derailleurs - Low Direct Mount Front Derailleur Cable Routing - Bottom Pull (Swing arm fully extended) Chainring Size G K M a = 66 a = 69 34/22 22 mm 26 mm 104 mm Low Direct Mount 36/22 18 mm 21 mm 88 mm 38/24 22 mm 26 mm 92 mm 42 mm 39/26 16 mm 21 mm 94 mm 42/28 22 mm 27 mm 100 mm 44/33/22 17 mm 22 mm 104 mm 45 mm 34 mm 10.5 max 13 mm Low Direct Mount α = Front Derailleur Cable Mounting Point Bottom Pull 17 mm max 7 mm max G K M5x0.8-6H 29 mm M Front Derailleur Cable Mounting Point Bottom Pull 420 mm min 75 mm 110 mm 10.5 max 38 Front Derailleurs

39 X0 / X9 / X7 / X5 Front Derailleurs - High Clamp Mount Front Derailleur - High Clamp Mount Frame Compatibility and Capacity Information Clamp Diameter Rear Capacity Index Cable Routing Chainstay Angle (α 3 ) Chainline 2x mm Band Clamp 31.8 mm [w/ adapter] Body Clamp 34.9 mm Band Clamp 34.9 mm Body Clamp 38.2 mm Band Clamp 10 speed Yes Top Pull Dual Pull Bottom Pull mm [34/22, 36/22, 38/24] 49.5 mm [39/26, 42/28] 3x mm Band Clamp 31.8 mm [w/ adapter] Body Clamp 34.9 mm Band Clamp 34.9 mm Body Clamp 38.2 mm Band Clamp 10 speed Yes Top Pull or Dual Pull mm [44/33/22] 34/22 Cage 36/22 and 38/24 Cage 39/26 and 42/28 Cage 44/33/22 Cage 39 Front Derailleurs

40 X0 / X9 / X7 / X5 Front Derailleurs - High Clamp Mount High Clamp Dimensions Chainring Combination 34/22 G Cable Pull Clamp Version A B C D E F α = 66 α = 69 H Top Pull Band Clamp 118 mm 12 mm 142 mm 88 mm 143 mm 34 mm 38 mm 22 mm 27 mm Dual Pull Body Clamp 123 mm 8 mm 36/22 Top Pull Dual Pull Band Clamp Body Clamp Band Clamp Body Clamp 114 mm 119 mm 114 mm 119 mm 137 mm 84 mm 139 mm 34 mm 33 mm 18 mm 23 mm 12 mm 7 mm 38/24 Top Pull Dual Pull Band Clamp Body Clamp Band Clamp Body Clamp 118 mm 123 mm 118 mm 123 mm 141 mm 88 mm 143 mm 34 mm 33 mm 22 mm 27 mm 12 mm 7 mm 39/26 Top Pull Dual Pull Band Clamp Body Clamp Band Clamp Body Clamp 112 mm 117 mm 112 mm 117 mm 135 mm 82 mm 137 mm 34 mm 33 mm 22 mm 27 mm 12 mm 7 mm 42/28 Dual Pull Band Clamp Body Clamp 118 mm 123 mm 141 mm 88 mm 143 mm 34 mm 33 mm 28 mm 33 mm 7 mm 44/33/22 Top Pull Dual Pull Band Clamp Body Clamp Band Clamp Body Clamp 129 mm 129 mm 129 mm 132 mm 148 mm 98 mm 151 mm 36 mm 31 mm 24 mm 29 mm 13 mm 5 mm 40 Front Derailleurs

41 X0 / X9 / X7 / X5 Front Derailleurs - High Clamp Mount D A B α = mm max mm cable stop C 7 mm max G 420 mm min 75 mm 110 mm E 30 mm 69 mm [34/22] 75 mm [36/22, 38/24] 77 mm [39/26, 42/28] 83 mm [44/33/22] H F 41 Front Derailleurs

42 X0 / X9 / X7 / X5 Front Derailleurs - High Direct Mount Front Derailleur - High Direct Mount Frame Compatibility and Capacity Information Rear Capacity Index Cable Routing Chain Stay Angle α Chainline Classic Body 10 speed Yes Top Pull or Dual Pull mm [36/22, 38/24] 49.5 mm [39/26, 42/28] 51 mm [44/33/22] Compact Body 10 speed Yes Top Pull Bottom Pull Dual Pull mm [34/22, 36/22, 38/24] 49.5 mm [39/26, 42/28] Cable housing Cable housing Classic body Bottom pull Classic body Top pull Compact body Top pull Compact body Bottom pull 42 Front Derailleurs

43 X0 / X9 / X7 / X5 Front Derailleurs - High Direct Mount Chainring Combination 34/22 36/22 38/24 Cable Pull by Body Style High Direct Mount Dimensions Compact Classic A C D E F α = 66 Top Pull Bottom Pull Dual Pull Top Pull - Top Pull Bottom Pull - Dual Pull Top Pull Dual Pull Top Pull Bottom Pull - Dual Pull Dual Pull 155 mm Compact 155 mm Compact mm Classic 155 mm Compact mm Classic 88 mm 84 mm 88 mm 163 mm Compact 164 mm Compact 168 mm Classic 169 mm Compact 173 mm Classic 34 mm 34 mm 34 mm 38 mm 55.5 mm (fat bike) 33 mm 50.5 mm (fat bike) 33 mm 50.5 mm (fat bike) 22 mm 18 mm 22 mm G α = 69 H 27 mm 23 mm 27 mm 12 mm 29.5 mm (fat bike) 8mm 25.5 mm (fat bike) 8mm 25.5 mm (fat bike) 14 mm 31.5 mm (fat bike) 7 mm 24.5 mm (fat bike) 7 mm 24.5 mm (fat bike) 14 mm 31.5 mm (fat bike) 7 mm 24.5 mm (fat bike) 7 mm 24.5 mm (fat bike) 39/26 42/28 44/33/22 Top Pull Top Pull 155 mm Compact 163 mm 14 mm Compact 27 Bottom Pull mm 82 mm 34 mm 33 mm 22 mm Classic 167 mm mm 7 mm Classic Dual Pull Dual Pull 7 mm Top Pull Top Pull 169 mm 14 mm 155 mm Compact 33 Bottom Pull - Compact 88 mm 34 mm 33 mm 28 mm 7 mm 173 mm mm mm Dual Pull Dual Pull Classic Classic 7 mm - Top Pull 14 mm mm 98 mm 180 mm 36 mm 31 mm 24 mm mm - Dual Pull 6 mm 43 Front Derailleurs

44 X0 / X9 / X7 / X5 Front Derailleurs - High Direct Mount High Direct Mount Frame Build Requirements for Standard and Fat Bikes 26 mm 43.5 mm (fat bike) A D C α = mm max 7 mm max G E 30 mm 420 mm min 75 mm 110 mm F H mm [34/22] 75 mm [36/22, 38/24] 77 mm [39/26, 42/28] 83 mm [44/33/22] Front Derailleurs

45 X0 / X9 / X7 / X5 Front Derailleurs - High Direct Mount High Direct Mount Frame Build Requirements for Standard and Fat Bikes 7.2 ±0.1 25±0.5 P4 - P3 0.5 P (fat bike) L M6x1-6H 11±0.5 19±0.5 L 10.5±0.5 (73 BB shell) 8±0.5 (68 BB shell) 6.5±0.5 (fat bike 100 BB shell) ±0.1 14±0.5 SECTION L-L A Thread Depth: 10 mm and more P P2 - P1 0.5 P1 P ±0.5 (73 BB shell) 34±0.5 (68 BB shell) 50±0.5 (fat bike 100 BB shell) 45 Front Derailleurs

46 X0 / X9 / X7 / X5 Front Derailleurs - Mid Direct Mount Front Derailleur - Mid Direct Mount 8.2±0.1 Mounting Area Mid Direct Mount Chainring Combination 34/22 33/22 36/22 38/24 Mounting Slot (38 mm Diameter Required) Cage Design Guard A B C D 2 x 10 Speed 34/22 T 2 x 10 Speed 38/36 T Yes mm mm 93 mm 148 mm No 127 mm 129 mm 88 mm 143 mm Yes mm mm 84.5 mm mm Yes mm mm 86.5 mm mm No 128 mm 130 mm 84 mm 139 mm Yes 135 mm 137 mm 93 mm 148 mm No mm mm 88 mm 143 mm α = A B B FD Body Thread M8x0.75 Thread Depth 8mm Washer shape dependent on frame design. Washer and bolt are not part of the product. Max. 4 Ø38± or 73 Max. 14 D Bolt M8 x 0.75 Remaining thread length in FD Body 7± ±0.5 for 73 15±0.5 for 68 C B Section B-B 46 Front Derailleurs

47 Rear Derailleurs

48 X0 / X9 / X7 / X5 Rear Derailleurs Rear Derailleur Hanger Specifications L X A R1 R2 T Exact Ratio 28 mm 8-10 mm 30 mm mm mm (max) mm 7-8 mm Rear Derailleur Hanger R2 R1 L 90 To center of bottom bracket T T T Centerline R/D bolt A X 12.7 mm ± Rear Derailleurs

49 X0 / X9 / X7 / X5 Rear Derailleurs 66 mm 13 mm R 22 Rear Derailleur Hanger M10x1-6H ø10.5 mm max 90.0 o Restricted area for rear derailleur* R 150 Connection Line to BB Shell *For proper rear dearailleur function, this area must be kept clear. Pivots, chainstays, or other components must not intrude. 49 Rear Derailleurs

50 Cranksets

51 X0 Cranksets [2x10] 2x10 Crankset Frame Clearance Information Chainring Combination L1 L2 L3 L4 L5 W1 W2 W3 W4 W5 (min) 34/22 25 mm 47.8 mm 70.6 mm 36/22 25 mm 46.7 mm 74.4 mm 38/ mm 50.7 mm 78.0 mm 73 mm (guard) 78 mm (guard) 82.5 mm (guard) 192 mm (175 mm crank arm lengths) 43 mm 44 mm 52 mm 57.8 mm (guard) 39/26 31 mm 55 mm 81 mm mm 44.5 mm 52.5 mm mm Q-factor : Bottom Bracket Type(s) : GXP : BB30 : PressFit 30 : PressFit GXP MTB L1 W4 W3 W2 W1 L2 L3 W5 L4 L5 W5 51 Cranksets

52 X0 Cranksets [3x10] Crankset Frame Clearance Information Chainring Combination L1 L2 L3 L4 L5 W1 W2 W3 W4 W5 (min) 44/33/22 25 mm 47 mm 69 mm 91 mm 192 mm (175 mm crank arm lengths) 41 mm 42 mm 50 mm 57 mm 70.5 mm 3x10 Q-factor : Bottom Bracket Type(s) : GXP : BB30 : PressFit 30 : PressFit GXP MTB L1 W4 W3 W2 W1 L2 L3 W5 L4 L5 W5 52 Cranksets

53 X9 Cranksets [2x10] 2x10 Crankset Frame Clearance Information Chainring Combination L1 L2 L3 L4 L5 W1 W2 W3 W4 W5 (min) 34/22 25 mm 47.8 mm 70.6 mm 73 mm (guard) 36/22 25 mm 46.7 mm 74.4 mm 78 mm (guard) 38/ mm 50.7 mm 78 mm 39/26 55 mm 81 mm 31 mm 42/28 60 mm 87 mm 82.5 mm (guard) 192 mm (175 mm crank arm length) 43 mm 44 mm 52 mm 57.8 mm (guard) mm 44.5 mm 52.5 mm mm 72 mm Q-factor : 171 Bottom Bracket Type(s) : GXP : BB30 : PressFit 30 : PressFit GXP MTB L1 W4 W3 W2 W1 L2 L3 W5 L4 L5 W5 53 Cranksets

54 X9 Cranksets [2x10] for fat bikes Crankset Frame Clearance Information Chainring Combination L1 L2 L3 L4 W1 W2 W3 W4 (min) 2x10 34/ mm 70.6 mm 25 mm 36/ mm 74.4 mm 192 mm (175 mm crank arm length) 60.5 mm 61.5 mm 69.5 mm 88 mm Q-factor : Bottom Bracket Type : GXP 100 : PressFit 121 L1 W4 W3 W2 W1 L2 L3 L4 W4 54 Cranksets

55 X9 Cranksets [3x10] Crankset Frame Clearance Information Chainring Combination L1 L2 L3 L4 L5 W1 W2 W3 W4 W5 (min) 44/33/22 25 mm 47 mm 69 mm 91 mm 192 mm (175 mm crank arm length) 41 mm 42 mm 50 mm 57 mm 72 mm 3x10 Q-factor : 171 Bottom Bracket Type(s) : GXP : BB30 : PressFit 30 : PressFit GXP MTB L1 W4 W3 W2 W1 L2 L3 W5 L4 L5 W5 55 Cranksets

56 X7 Cranksets [2x10] Crankset Frame Clearance Information Chainring Combination L1 L2 L3 L4 L5 W1 W2 W3 W4 W5 (min) 34/ mm 70.6 mm 25 mm 36/ mm 74.4 mm 73 mm (guard) 78 mm (guard) 38/ mm 50.7 mm 78 mm 82.5 mm (guard) 192 mm (175 mm crank arm length) 43 mm 44 mm 52 mm 57.8 mm (guard) 70.5 mm 2x10 39/26 55 mm 81 mm 31 mm 42/28 60 mm 87 mm mm 44.5 mm 52.5 mm - Q-factor : Bottom Bracket Type(s) : GXP : BB30 : PressFit 30 : PressFit GXP MTB L1 W4 W3 W2 W1 L2 L3 W5 L4 L5 W5 56 Cranksets

57 X7 Cranksets [3x10] Crankset Frame Clearance Information Chainring Combination L1 L2 L3 L4 L5 W1 W2 W3 W4 W5 (min) 44/33/22 25 mm 47 mm 69 mm 91 mm 191 mm (180 mm crank arm length) 41 mm 42 mm 50 mm 57 mm 70.5 mm 3x10 Q-factor : Bottom Bracket Type(s) : GXP : BB30 : PressFit 30 : PressFit GXP MTB L1 W4 W3 W2 W1 L2 L3 W5 L4 L5 W5 57 Cranksets

58 X5 Cranksets [2x10] 2x10 Crankset Frame Clearance Information Chainring Combination L1 L2 L3 L4 L5 W1 W2 W3 W4 W5 (min) 34/ mm 70.6 mm 73 mm (guard) 25 mm 36/ mm 74.4 mm 78 mm (guard) 38/ mm 50.7 mm 78 mm 39/26 55 mm 81 mm 31 mm 42/28 60 mm 87 mm 82.5 mm (guard) 192 mm (175 mm crank arm length) 43 mm 44 mm 52 mm 52 mm 57.8 mm (guard) mm 44.5 mm 52.5 mm mm 72 mm Q-factor : 169 Bottom Bracket Type(s) : GXP : BB30 : PressFit 30 : PressFit GXP MTB L1 W4 W3 W2 W1 L2 L3 W5 L4 L5 W5 58 Cranksets

59 X5 Cranksets [2x10] for fat bikes Crankset Frame Clearance Information Chainring Combination L1 L2 L3 L4 W1 W2 W3 W4 (min) 2x10 34/ mm 70.6 mm 25 mm 36/ mm 74.4 mm 192 mm (175 mm crank arm length) 60.5 mm 61.5 mm 69.5 mm 88 mm Q-factor : Bottom Bracket Type : GXP 100 : PressFit 121 L1 W4 W3 W2 W1 L2 L3 L4 W4 59 Cranksets

60 X5 Cranksets [3x10] Crankset Frame Clearance Information Chainring Combination L1 L2 L3 L4 L5 W1 W2 W3 W4 W5 (min) 44/33/22 25 mm 47 mm 69 mm 91 mm 191 mm (175 mm crank arm length) 41 mm 42 mm 50 mm 57 mm 72 mm 3x10 Q-factor : 169 Bottom Bracket Type(s) : GXP : BB30 TM : PressFit 30 : PressFit GXP MTB L1 W4 W3 W2 W1 L2 L3 W5 L4 L5 W5 60 Cranksets

61 Bottom Brackets

62 PressFit 30 SRAM PressFit 30 (PF30) bottom brackets have been designed and tested to work within the bounds of the dimensions and tolerances in the shell specifications and bottom bracket specifications. Materials, manufacturing methods, and frame shell designs can potentially influence the performance of the bottom bracket, even when the shell is manufactured to these specifications. In these instances, it is recommended that bicycle manufacturers confirm the bottom bracket system performance with individual frame configurations. Things that should be considered when evaluating the frame and bottom bracket interaction include, but are not limited to: Loosening of the adapter cups from the bottom bracket shell (frame material choice can greatly affect friction coefficient). Binding of bearings within the bottom bracket. For more information regarding PF30 bottom bracket technical information, contact your SRAM representative. PressFit 30 MTB BB Shell Specification B W ± MIN NDS DS ± MIN 2X 1±0.5 X 45 B Dim W 4 Dim DS Dim NDS -A- PF PF Ø Ø44.5 MIN Notes 1. Dimensions apply after finishing. 2. Only dimensions essential to bottom bracket PressFit and function are shown. All other details are left to the discretion of the frame or component designer. Dimensions shown do not take the place of proper frame, bottom bracket shell, or crankset design. DS 3. PressFit surfaces should be unpainted. 4. Recommended 73 mm or 83 mm for MTB applications. 3 Frame Centerline 62 Bottom Brackets

63 B Dim W 3 Dim DS Dim NDS PF PF B Notes 1.5 (2X) 27 3 W ± Dimensions apply after finishing. Only dimensions essential to bottom bracket PressFit and function are shown. All other details are left to the discretion of the frame or crankset designer. Dimensions shown do not take the place of proper frame, bottom bracket shell, or crankset design. Recommended 73 mm or 83 mm for MTB applications. Non-Drive Side (NDS) Ø44 Ø (2X) Ø52 (2X) Drive Side (DS) 4. Ensure that the bottom bracket cups are completely pressed into the frame shell. There should be no gap between the flange and 11.5 ± 0.2 PressFit region (2x) Frame Centerline ± 0.2 PressFit region (2x) 63 Bottom Brackets

64 PressFit 89.5 & 92 GXP MTB Bottom Bracket PressFit 89.5 & 92 GXP MTB BB Shell Specification A 89.5± (44.75) 92.0± (47.25) Ø Ø A -A- 1 DS -A- 1 DS Frame Centerline Frame Centerline Section A-A Section A-A MTB Symmetric 89.5 Shell MTB Asymmetric 92 Shell PressFit GXP MTB BB-Key Dimensions Non-Drive Side (NDS) ± (44.75) Frame Centerline 3.5 (2X) Ø44.0 (2X) (2X) PressFit Region ± (47.25) Ø34.0 Ø Frame Centerline Drive Side (DS) NOTES: 1 ITEM NO. DESCRIPTION 1 WAVE WASHER 2 DS SHIELD 3 NDS SHIELD 4 DS CUP 5 NDS CUP 6 DS SHIM WASHER 2.5 MM 7 DS SHIM WASHER 4.5 MM 8 DS SHIM WASHER 0.5 MM PressFit GXP MTB bottom bracket is only compatible with the shown bottom bracket shell specifications. 2 Only dimensions essential to bottom bracket press fit and function are shown. Dimensions apply after finish. 3 Tolerance applies to depth of mm from surface -Aeach side. MTB Symmetric 89.5 Bottom Bracket MTB Asymmetric 92 Bottom Bracket 4 5 Press fit surfaces should be unpainted. E-type front derailleurs or captured chainguide mounts cannot be used on carbon fiber frames. 6 DS shim washer to be used only on MTB symmetric shell. 64 Bottom Brackets

65 PressFit & 107 GXP MTB Bottom Bracket PressFit & 107 GXP MTB BB Shell Specification A 104.5± (52.25) 107± (54.25) Ø Ø A -A- 1 DS -A- 1 DS Frame Centerline Frame Centerline SECTION A-A MTB Symmetric Shell SECTION A-A MTB Asymmetric 107 Shell PressFit GXP MTB BB - Key Dimensions Non-Drive Side (NDS) ± (52.25) Frame Centerline ± (54.75) Frame Centerline Drive Side (DS) NOTES: 1 ITEM NO. DESCRIPTION 1 WAVE WASHER 2 DS SHIELD 3 NDS SHIELD 4 DS CUP 5 NDS CUP 6 DS SHIM WASHER 0.5 MM PressFit GXP MTB bottom bracket is only compatible with the shown bottom bracket shell specifications. 2 Only dimensions essential to bottom bracket press fit and function are shown. Dimensions apply after finish. 3 Tolerance applies to depth of mm from surface A each side. 4 Press fit surfaces should be unpainted. MTB Symmetric Bottom Bracket MTB Asymmetric 107 Bottom Bracket E-type front derailleurs or captured chainguide mounts cannot be used on carbon fiber frames. DS shim washer to be used only on MTB symmetric shell, quantity Bottom Brackets 5 6

66 PressFit 121 GXP MTB Bottom Bracket PressFit 121 GXP MTB BB Shell Specification 121±0.5 A 60.5 (60.5) Ø A -A- 1 DS Frame Centerline SECTION A-A MTB Symmetric 121 Shell for fat bikes PressFit GXP MTB BB - Key Dimensions 121±0.5 ITEM NO. DESCRIPTION 1 WAVE WASHER Non-Drive Side (NDS) (60.5) Frame Centerline 1 6 NOTES: 1 2 DS SHIELD 3 NDS SHIELD 4 DS CUP 5 NDS CUP 6 DS SHIM WASHER 4.5 MM PressFit GXP MTB bottom bracket is only compatible with the shown bottom bracket shell specifications. 2 Only dimensions essential to bottom bracket press fit and function are shown. Dimensions apply after finish. 3 Tolerance applies to depth of mm from surface -Aeach side. 4 Press fit surfaces should be unpainted. MTB Symmetric 121 Bottom Bracket for fat bikes 5 6 E-type front derailleurs or captured chainguide mounts cannot be used on carbon fiber frames. DS shim washer to be used only on MTB symmetric shell. 66 Bottom Brackets

67 GEN Rev A 2014 SRAM, LLC