TECHNICAL BOOK. Sliding doors QUINTA

Transcription

1 TECHNICAL BOOK Sliding doors QUINTA

2 TECHNICAL BOOK QUINTA - RELEASE 2.3 DATED 28/01/2016 PRODUCT S CARD N QT Product and legal denomination: SLIDING DOORS FOR INTERIORS Commercial name: QUINTA Typology: ALUMINIUM AND GLASS OR WOOD PRODUCTS COMPONENTS USED MATERIALS METAL PARTS GLASS PARTS GASKETS AND OTHER ACCESSORIES POSSIBLE HARMFUL SUBSTANCES TO HEALTH ORDINARY MAINTENANCE WARNINGS Frame, jamb in profiled aluminium UNI Finishing:brushed anodized UNI Tempered glass mm 6 UNI EN :2001 or stratified 3+3 UNI EN UNI EN UNI EN Finishing: float light or acid-etched or painted. Parry profile in plastic. Handle: zama or aluminium. None. Clean with a soft cloth, slightly dampened and free from products containing solvent and/or abrsive material. The assembly must be made only by expert people, verifying the resistance of the wall s and ceiling s materials and the choice of the anchorage systems. These cards of certification of the product comply with all what the law n.206 del prescribes. DELMONTE S.R.L IS CERTIFIED WITH THE MANAGEMENT SYSTEM FOR THE QUALITY ACCORDING TO UNI EN ISO 9001:2000, FOR THE ACTIVITY OF PLANNING AND PRODUCTION OF DOORS FOR INTERIORS, FURNISHINGS AND COMPLEMENTS FURNITURE IN ALUMINIUM. 2

3 FINISHINGS JAMB / FRAME Champagne Black Bronze HANDLE Ziricote Sicomoro Palissandro Rovere naturale GLASS DOOR Neutro Acidato Bianco latte Neutro extrachiaro Specchio Fumé Bronzo CAT.A CAT.A CAT.A CAT.B CAT.B CAT.B CAT.B Acidato extrachiaro Fumé acidato Bronzo acidato Smoked reflex Bronze reflex Specchio acidato Specchio bronzo Blu notte Tortora Sughero Ardesia Nero Dark grey Bianco neve extrachiaro CAT.D CAT.D Neve acidato Canapa Senape Rosso fuoco CAT.D CAT.D CAT.D CAT.D 3

4 SLIDING DOOR: CEILING RAILS COMPONENTS LIST Trolley Decelerator brake 74 Ceiling beam 1 Telescopic rail H1 Ceiling Door H Vertical Profile Upper profile Recess panelling 8 Handle Vertical Profile 44 The ceiling rail is made up of: - Ceiling beam in anodized aluminium 1-2 ways ways rail in anodized aluminium RULE TO CALCULATE THE DOORS HEIGHT (H) Glass door H1= H min. ceiling H door = H1-83mm 75 H1 H Ceiling Door 8 4

5 SLIDING DOOR: CEILING RAILS DETAIL - RAIL S ASSEMBLING RAIL S ASSEMBLING Ceiling beam Telescopic rail RAIL S REGULATION Min. excursion Max. excursion Excursion considered to calculate doors H DOOR S REGULATION 1 5 Sliding trolley with vertical adjustment of the panel

6 SLIDING DOOR: CEILING RAILS CEILING RAIL S COMPOSITION way rail for sliding doors 2 ways rail for sliding doors 74 BUILT-IN CEILING RAIL S COMPOSITION 92 1 way rail for sliding doors 2 ways rail for sliding doors TERMINAL DOORJAMB STANDARD EXCURSION For 1 or 2 ways rails 33 H terminal doorjamb = H1-74mm The terminal doorjamb can be cut in the height if it is necessary to lower the rail. 74 H terminal doorjamb H1 ceiling 33 terminal doorjamb cover in anodized aluminium MAX. EXCURSION For 1 or 2 ways rails 45 Gasket Wall profile

7 SLIDING DOORS: WALL RAILS DETAIL - WALL RAIL COMPONENTS LIST Support beam Decelerator brake Trolley Telescopic rail 69 1 Upper profile Recess panelling Vertical Profile Handle Vertical Profile Lower profile DETAIL - WALL RAIL RULE TO CALCULATE THE DOORS HEIGHT (H) Glass door H1 = H min. Space H Door = H1-9 mm 69 1 H1 Space H door 8 Floor guide 7

8 SLIDING DOORS: WALL RAILS (1 WAY) RAIL S ASSEMBLING 12 DOOR S REGULATION 1 5 Sliding trolley with vertical adjustment of the panel SIDE PLUGS ASSEMBLING Support beam Telescopic rail 69 Side plug 8

9 SLIDING DOORS: WALL RAILS WALL TERMINAL DOORJAMB terminal doorjamb space H1 space H1 terminal doorjamb H H H terminal doorjamb = H mm Wall profile Gasket 60 cover in anodized aluminium WALL RAIL FIXED TO THE CEILING 75 H door H1 ceiling

10 SLIDING DOORS: WALL RAILS (2 WAYS) RAIL S ASSEMBLING DOOR S REGULATION Carter 1 Sliding trolley with vertical adjustment of the panel SIDE PLUGS ASSEMBLING 88 Support beam 68 Telescopic rail Side plug 10

11 SLIDING DOORS: BUILT-IN RAIL (1 WAY) FIXATION INTO PLASTERBOARD BUILT-IN RAIL (1 WAY) Built-in beam Plasterboard REMOVE TEMPLATE H OVERHEAD RAIL H DOOR H FALSE CEILING Template FIXATION PLATE 4 MM THICKNESS Plate for rail adjustment RAIL ASSEMBLING EQ-BS10 11

12 SLIDING DOORS: BUILT-IN RAIL (2 WAYS) FIXATION INTO PLASTERBOARD BUILT-IN RAIL (2WAYS) Built-in beam Plasterboard REMOVE TEMPLATE H OVERHEAD RAIL H DOOR H FALSE CEILING Template FIXATION PLATE 4 MM THICKNESS Plate for rail adjustment RAIL ASSEMBLING EQ-BS20 12

13 SLIDING DOORS WITH CEILING RAILS: OPENING SCHEMES 2 SLIDING DOORS WITH CEILING RAILS = / mm L beam/rail = - 2 mm 3 SLIDING DOORS WITH CEILING RAILS = / mm L beam/rail = - 2 mm 4 SLIDING DOORS WITH CEILING RAILS = / mm L beam/rail = - 2 mm 13

14 SLIDING DOORS WITH CEILING RAILS: OPENING SCHEMES 2 SLIDING DOORS WITH CEILING RAILS = / mm L Beam/rail = - 2 mm 3 SLIDING DOORS WITH CEILING RAILS = / mm L Beam/rail = - 2 mm 4 SLIDING DOORS WITH CEILING RAILS = / mm L Beam/rail = - 2 mm 14

15 SLIDING DOORS WITH WALL RAILS: OPENING SCHEMES SLIDING DOOR WITH TERMINAL DOORJAMB = + 90 mm L Beam/rail = x 2-30 mm SLIDING DOOR WITHOUT TERMINAL DOORJAMB = mm L Beam/rail = x mm 2 SLIDING DOORS WITH WALL RAILS = + 60 mm L Beam/rail = x mm 15

16 GLASS SLIDING DOORS: CHARACTERISTICS HANDLE IN WOOD GENERAL CHARACTERISTICS Door frame and cross-bars in anodized aluminium - Recess panelling Transparent glass Satin-finished glass Opaque glass See the recess panelling finishings table Note: the glass is tempered, th. 6mm or stratified 3+3 according to the dimensions and subdivision of the door (see categories A-B-C-D). 16