MEDICAL PACKAGING TRANSITION PROJECT CELL DESCRIPTORS ENGLISH UNITS
|
|
|
- Hector Cummings
- 7 years ago
- Views:
Transcription
1 MEDICAL PACKAGING TRANSITION PROJECT CELL DESCRIPTORS ENGLISH UNITS
2 (MPTP) Table of Contents EO Pouches and Bags FFS Rigid Tray Gamma Pouches and Bags FFS Rigid Tray Electron Beam Pouches and Bags FFS Steam Pouches and Bags Rigid Tray Dry Heat Rigid Tray Low Temperature H 2 O 2 Pouches and Bags Rigid Tray Copyright 2013 DuPont. All rights reserved. The DuPont Oval Logo, DuPont, Surlyn and Tyvek are trademarks or registered trademarks of E.I. du Pont de Nemours and Company or its affiliates. (09/14)
3 DuPont Tyvek 1073B Coated Pouch EO Chevron peel pouch EO deep draw Number of cycles: 2 Total time per cycle (excluding pre- and post-conditioning): 12 hours and 0 minutes DuPont Tyvek 1073B Oliver-Tolas XHale 109P Coated EO exposure time per cycle: 3 hours and 0 minutes EO concentration: 560 ppm Oliver-Tolas 48-gauge PET/2 mil LDPE Film Maximum temperature: 130 F Maximum relative humidity: 90% Maximum pressure rate change: 0.7 psi/min
4 DuPont Tyvek 1073B Coated Pouch EO Chevron peel pouch EO deep draw Number of cycles: 1 Total time per cycle (excluding pre- and post-conditioning): 8 hours and 16 minutes DuPont Tyvek 1073B Perfecseal CR27 EU Coated EO exposure time per cycle: 4 hours and 2 minutes EO concentration: 1455 ppm 0.5 mil PET/2.0 mil LDPE Film Maximum temperature: 126 F Maximum relative humidity: 70% Maximum pressure rate change: 0.9 psi/min
5 DuPont Tyvek 1073B Coated Header bag EO Header bag EO deep draw Number of cycles: 2 Total time per cycle (excluding pre- and post-conditioning): 8 hours and 30 minutes DuPont Tyvek 1073B Amcor Flexibles Inc. Coated EO exposure time per cycle: ~3-4 hours and 0 minutes EO concentration: 465 ppm Amcor Flexibles Inc. 4 mil PE/Nylon/PE Bag Film Maximum temperature: 158 F Maximum relative humidity: ~100% Maximum pressure rate change: 2.0 psi/min
6 DuPont Tyvek 1073B Coated Header bag EO Header bag EO shallow draw Number of cycles: 1 Total time per cycle (excluding pre- and post-conditioning): >18 hours and 10 minutes DuPont Tyvek 1073B Perfecseal CR27 EU Coated EO exposure time per cycle: >14 hours and 0 minutes EO concentration: >194 ppm 5 mil transparent and white PE films Maximum temperature: 113 F Maximum relative humidity: 95% Maximum pressure rate change: 0.5 psi/min
7 DuPont Tyvek 1073B Coated Pouch EO Chevron peel pouch EO shallow draw Number of cycles: 2 Total time per cycle (excluding pre- and post-conditioning): 13 hours and 0 minutes DuPont Tyvek 1073B Perfecseal CR27 Coated EO exposure time per cycle: 10 hours and 0 minutes EO concentration: 770 ppm 4 mil Multi-layer Nylon/PE Coex Film Maximum temperature: 118 F Maximum relative humidity: 81% Maximum pressure rate change: 0.7 psi/min
8 DuPont Tyvek 1073B Coated Header bag EO Header bag EO deep draw Number of cycles: 1 Total time per cycle (including pre- and post-conditioning): 27 hours and 0 minutes DuPont Tyvek 1073B Perfecseal HCW CR27 Coated EO exposure time per cycle: 3 hours and 0 minutes EO concentration: 600 ppm ShieLLD O 4 mil Nylon/PE Bag Film Maximum temperature: 150 F Maximum relative humidity: ~100% Maximum pressure rate change: 1.0 psi/min
9 DuPont Tyvek 1073B Coated Pouch EO Chevron peel pouch EO deep draw Number of cycles: 2 DuPont Tyvek 1073B Oliver-Tolas SealScience TPT-0270 Coated Total time per cycle (excluding pre- and post-conditioning): 16 hours and 25 minutes EO exposure time per cycle: 8 hours and 10 minutes EO concentration: 518 ppm Oliver-Tolas TPF mil Biax Nylon/3 mil LLDPE Film Maximum temperature: 132 F Maximum relative humidity: 90% Maximum pressure rate change: 1.0 psi/min
10 DuPont Tyvek 1073B Uncoated Pouch EO Chevron peel pouch EO deep draw Number of cycles: 2 Total time per cycle (excluding pre- and post-conditioning): 16 hours and 25 minutes DuPont Tyvek 1073B Oliver-Tolas Uncoated EO exposure time per cycle: 8 hours and 10 minutes EO concentration: 518 ppm Oliver-Tolas TPF-0501A 48-gauge PET/2 mil LDPE Film Maximum temperature: 132 F Maximum relative humidity: 90% Maximum pressure rate change: 1.0 psi/min
11 DuPont Tyvek 1073B Uncoated Pouch EO Chevron peel pouch EO deep draw Number of cycles: 3 Total time per cycle (excluding pre- and post-conditioning): ~6 hours and 45 minutes DuPont Tyvek 1073B Mangar Industries Uncoated EO exposure time per cycle: ~5 hours and 0 minutes EO concentration: 600 ppm 48-gauge PET/2 mil LDPE Film Maximum temperature: 130 F Maximum relative humidity: 75% Maximum pressure rate change: 0.5 psi/min
12 DuPont Tyvek 1073B Uncoated Pouch EO Chevron peel pouch EO deep draw Number of cycles: 2 Total time per cycle (including pre- and post-conditioning): >16 hours and 0 minutes DuPont Tyvek 1073B Mangar Industries Uncoated EO exposure time per cycle: >6 hours and 0 minutes EO concentration: >500 ppm 100-gauge Biax Nylon/2 mil PE Film Maximum temperature: ~131 F Maximum relative humidity: ~90% Maximum pressure rate change: 0.5 psi/min
13 DuPont Tyvek 1073B Uncoated Pouch EO Chevron peel pouch EO deep draw Number of cycles: 2 Total time per cycle (excluding pre- and post-conditioning): 8-12 hours and 0 minutes DuPont Tyvek 1073B Perfecseal Uncoated EO exposure time per cycle: 2 hours and 0 minutes EO concentration: ppm Perfecflex K 92-gauge OPET/3 mil PE Film Maximum temperature: 126 F Maximum relative humidity: 60% Maximum pressure rate change: 0.8 psi/min
14 DuPont Tyvek 1073B Uncoated Pouch EO Chevron peel pouch EO deep draw Number of cycles: 1 Total time per cycle (including pre- and post-conditioning): hours and 0 minutes DuPont Tyvek 1073B Beacon Converters Uncoated EO exposure time per cycle: 5-6 hours and 0 minutes EO concentration: 500 ppm Beacon Converters A gauge Biax Nylon/3 mil Peelable PE Film Maximum temperature: 120 F Maximum relative humidity: 75% Maximum pressure rate change: 0.5 psi/min
15 DuPont Tyvek 1073B Uncoated Pouch EO Chevron peel pouch EO deep draw Number of cycles: 3 Total time per cycle (excluding pre- and post-conditioning): ~13 hours and 45 minutes DuPont Tyvek 1073B Amcor Flexibles Inc. Uncoated EO exposure time per cycle: 3-4 hours and 0 minutes EO concentration: ~660 ppm Amcor Flexibles Inc. 48-gauge PET/Adhesive/2 mil LDPE Film Maximum temperature: 135 F Maximum relative humidity: 90% Maximum pressure rate change: 1.6 psi/min
16 DuPont Tyvek 1073B Uncoated Pouch EO Chevron peel pouch EO deep draw Number of cycles: 2 Total time per cycle (excluding pre- and post-conditioning): 13 hours and 12 minutes DuPont Tyvek 1073B Mangar Industries Uncoated EO exposure time per cycle: 4 hours and 0 minutes EO concentration: 650 ppm 1 mil Nylon/ 2 mil Peelable LDPE/Allegro T Film Maximum temperature: 113 F Maximum relative humidity: 100% Maximum pressure rate change: 0.4 psi/min
17 DuPont Tyvek 1059B Uncoated Header bag EO Kwikbreathe True Header Bag EO shallow draw Number of cycles: 2 Total time per cycle (excluding pre- and post-conditioning): ~13 hours and 30 minutes DuPont Tyvek 1059B Printpack Inc. Uncoated EO exposure time per cycle: 7 hours and 0 minutes EO concentration: ~500 ppm Printpack Inc. 4 mil LLDPE-mULDPE Films Maximum temperature: 140 F Maximum relative humidity: 80% Maximum pressure rate change: 1.0 psi/min
18 DuPont Tyvek 1059B Uncoated Pouch EO Chevron peel pouch EO deep draw Number of cycles: 3 Total time per cycle (excluding pre- and post-conditioning): 12 hours and 0 minutes DuPont Tyvek 1059B Amcor Flexibles Inc. Uncoated EO exposure time per cycle: 4 hours and 30 minutes EO concentration: 600 ppm Amcor Flexibles Inc. 48-gauge PET/2.3 mil LLDPE/EVA Film Maximum temperature: 140 F Maximum relative humidity: 85% Maximum pressure rate change: 1.2 psi/min
19 DuPont Tyvek 1059B Uncoated Pouch EO Chevron peel pouch EO deep draw Number of cycles: 2 Total time per cycle (excluding pre- and post-conditioning): 8-10 hours and 0 minutes DuPont Tyvek 1059B Mangar Industries Uncoated EO exposure time per cycle: 2 hours and 0 minutes EO concentration: 370 ppm 48-gauge PET/2 mil LDPE Film Maximum temperature: 130 F Maximum relative humidity: 55% Maximum pressure rate change: 0.7 psi/min
20 DuPont Tyvek 1059B Uncoated Pouch EO Chevron peel pouch EO deep draw Number of cycles: 1 Total time per cycle (excluding pre- and post-conditioning): 11 hours and 40 minutes DuPont Tyvek 1059B Beacon Converters Uncoated EO exposure time per cycle: 5 hours and 0 minutes EO concentration: 610 ppm Beacon Converters A24 92-gauge PET/2 mil PE Film Maximum temperature: 130 F Maximum relative humidity: 85% Maximum pressure rate change: 0.5 psi/min
21 DuPont Tyvek 1059B Uncoated Vent bag EO Vent bag EO shallow draw Number of cycles: 1 Total time per cycle (excluding pre- and post-conditioning): 13 hours and 0 minutes DuPont Tyvek 1059B Amcor Flexibles Inc. Uncoated EO exposure time per cycle: 6 hours and 0 minutes EO concentration: 1000 ppm Amcor Flexibles Inc. Durable Coex Film with Linear Tear Properties Maximum temperature: 140 F Maximum relative humidity: 85% Maximum pressure rate change: 0.6 psi/min
22 DuPont Tyvek 1059B Uncoated Pouch EO Chevron peel pouch EO deep draw Number of cycles: 2 Total time per cycle (including pre- and post-conditioning): 20 hours and 0 minutes DuPont Tyvek 1059B Perfecseal Uncoated EO exposure time per cycle: 2 hours and 0 minutes EO concentration: 500 ppm Perfecflex E 48-gauge PET/1.5 mil PE Film Maximum temperature: 145 F Maximum relative humidity: 100% Maximum pressure rate change: 0.65 psi/min
23 DuPont Tyvek 1059B Uncoated Pouch EO Chevron peel pouch EO deep draw Number of cycles: 1 Total time per cycle (excluding pre- and post-conditioning): 11 hours and 30 minutes DuPont Tyvek 1059B Beacon Converters Uncoated EO exposure time per cycle: 6 hours and 0 minutes EO concentration: >560 ppm Beacon Converters A20 48-gauge PET/2 mil LDPE Film Maximum temperature: 140 F Maximum relative humidity: 80% Maximum pressure rate change: 1.0 psi/min
24 DuPont Tyvek 1073B Coated FFS flexible blister EO FFS flexible blister EO shallow draw Number of cycles: 1 Total time per cycle (excluding pre- and post-conditioning): 10 hours and 8 minutes DuPont Tyvek 1073B Perfecseal SBP2000 Coated EO exposure time per cycle: 4 hours and 5 minutes EO concentration: ppm PerfecForm ESE O 4 mil EVA/Surlyn/EVA Forming Film Maximum temperature: 140 F Maximum relative humidity: 80% Maximum pressure rate change: 0.5 psi/min
25 DuPont Tyvek 1073B Coated FFS rigid blister EO FFS rigid blister EO deep draw Number of cycles: 1 Total time per cycle (excluding pre- and post-conditioning): 11 hours and 30 minutes DuPont Tyvek 1073B Perfecseal CR27 EU Coated EO exposure time per cycle: 4 hours and 0 minutes EO concentration: 600 ppm 20 mil PETG Forming Film Maximum temperature: 115 F Maximum relative humidity: 80% Maximum pressure rate change: 0.5 psi/min
26 DuPont Tyvek 1073B Coated FFS flexible blister EO FFS flexible blister EO shallow draw Number of cycles: 1 Total time per cycle (including pre- and post-conditioning): 8 hours and 0 minutes DuPont Tyvek 1073B Perfecseal CR27 EU Coated EO exposure time per cycle: 2 hours and 0 minutes EO concentration: 590 ppm Multi-layer (Nylon, EvOH, others) Forming Film Maximum temperature: 131 F Maximum relative humidity: 80% Maximum pressure rate change: 0.5 psi/min
27 DuPont Tyvek 1073B Coated FFS flexible blister EO FFS flexible blister EO shallow draw Number of cycles: 2 Total time per cycle (excluding pre- and post-conditioning): ~12 hours and 30 minutes DuPont Tyvek 1073B Oliver-Tolas XHale 27HT-7 Coated EO exposure time per cycle: ~6 hours and 0 minutes EO concentration: 520 ppm 6 mil Surlyn/PE Flex Forming Film Maximum temperature: 140 F Maximum relative humidity: ~100% Maximum pressure rate change: ~1.0 psi/min
28 DuPont Tyvek 1073B Coated FFS flexible blister EO FFS flexible blister EO deep draw Number of cycles: 2 Total time per cycle (excluding pre- and post-conditioning): 8-12 hours and 0 minutes DuPont Tyvek 1073B Oliver-Tolas XHale 10MP Coated EO exposure time per cycle: 2 hours and 0 minutes EO concentration: ppm 8 mil EVA/Surlyn/EVA Forming Film Maximum temperature: 126 F Maximum relative humidity: 60% Maximum pressure rate change: 0.8 psi/min
29 DuPont Tyvek 1073B Coated FFS flexible blister EO FFS flexible blister EO deep draw Number of cycles: 1 Total time per cycle (excluding pre- and post-conditioning): 9 hours and 45 minutes DuPont Tyvek 1073B Oliver-Tolas XHale 10MP Coated EO exposure time per cycle: 6 hours and 0 minutes EO concentration: 257 ppm 20 mil PET GAG Forming Film Maximum temperature: 122 F Maximum relative humidity: 70% Maximum pressure rate change: 0.5 psi/min
30 DuPont Tyvek 1059B Coated FFS flexible blister EO FFS flexible blister EO deep draw Number of cycles: 1 Total time per cycle (excluding pre- and post-conditioning): 8 hours and 30 minutes DuPont Tyvek 1059B Perfecseal SBP2000 Coated EO exposure time per cycle: 1 hours and 30 minutes EO concentration: 69 ppm PPC 1325-T 8 mil Forming Film Maximum temperature: 140 F Maximum relative humidity: 75% Maximum pressure rate change: 0.5 psi/min
31 DuPont Tyvek 1059B Coated FFS flexible blister EO FFS flexible blister EO deep draw Number of cycles: 2 Total time per cycle (excluding pre- and post-conditioning): 8-10 hours and 0 minutes DuPont Tyvek 1059B Amcor Flexibles Inc. Coated EO exposure time per cycle: 2 hours and 0 minutes EO concentration: 370 ppm PPC 1325-TLS 4 mil Forming Film Maximum temperature: 130 F Maximum relative humidity: 55% Maximum pressure rate change: 0.7 psi/min
32 DuPont Tyvek 1059B Coated FFS rigid blister EO FFS rigid blister EO shallow draw Number of cycles: 3 Total time per cycle (including pre- and post-conditioning): 31 hours and 0 minutes DuPont Tyvek 1059B Oliver-Tolas XHale NP34 Coated EO exposure time per cycle: 13 hours and 10 minutes EO concentration: 1000 ppm Pacur 16 mil PETG Forming Film Maximum temperature: 120 F Maximum relative humidity: ~88% Maximum pressure rate change: 0.7 psi/min
33 DuPont Tyvek 1059B Uncoated FFS flexible blister EO FFS flexible blister EO deep draw Number of cycles: 2 Total time per cycle (excluding pre- and post-conditioning): 18 hours and 30 minutes DuPont Tyvek 1059B Rollprint Inc. Uncoated EO exposure time per cycle: 14 hours and 42 minutes EO concentration: 667 ppm 1.6 mil Nylon/2.8 mil EVA Forming Film Maximum temperature: 125 F Maximum relative humidity: 70% Maximum pressure rate change: 1.2 psi/min
34 DuPont Tyvek 1059B Uncoated FFS flexible blister EO FFS flexible blister EO deep draw Number of cycles: 2 Total time per cycle (excluding pre- and post-conditioning): 8-12 hours and 0 minutes DuPont Tyvek 1059B Perfecseal Uncoated EO exposure time per cycle: 2 hours and 0 minutes EO concentration: ppm PerfecForm ICE W 6 mil Nylon Forming Film Maximum temperature: 126 F Maximum relative humidity: 60% Maximum pressure rate change: 0.8 psi/min
35 DuPont Tyvek 1059B Uncoated FFS flexible blister EO FFS flexible blister EO deep draw Number of cycles: 2 Total time per cycle (excluding pre- and post-conditioning): 8-10 hours and 0 minutes DuPont Tyvek 1059B Perfecseal Uncoated EO exposure time per cycle: 2 hours and 0 minutes EO concentration: 370 ppm PerfecForm ICE EE 8 mil Nylon Forming Film Maximum temperature: 130 F Maximum relative humidity: 55% Maximum pressure rate change: 0.7 psi/min
36 DuPont Tyvek 1073B Coated Thermoformed tray EO Thermoformed tray with coated lid EO deep draw Number of cycles: 1 Total time per cycle (excluding pre- and post-conditioning): 20 hours and 5 minutes DuPont Tyvek 1073B Perfecseal CR27 Coated EO exposure time per cycle: ~5 hours and 0 minutes EO concentration: ppm 35 mil PETG tray Maximum temperature: 135 F Maximum relative humidity: 90% Maximum pressure rate change: 0.5 psi/min are trademarks or registered trademarks of E.I. du Pont de Nemours and Company or its affiliates. (02/14)
37 DuPont Tyvek 1073B Coated Thermoformed tray EO Thermoformed tray with coated lid EO deep draw Number of cycles: 1 Total time per cycle (excluding pre- and post-conditioning): 8 hours and 6 minutes DuPont Tyvek 1073B Amcor Flexibles Inc. Coated EO exposure time per cycle: ~4 hours and 30 minutes EO concentration: 760 ppm 20 mil PVC tray Maximum temperature: 120 F Maximum relative humidity: 75% Maximum pressure rate change: 0.5 psi/min
38 DuPont Tyvek 1073B Coated Thermoformed tray EO Thermoformed tray with coated lid EO deep draw Number of cycles: 3 Total time per cycle (excluding pre- and post-conditioning): 4 hours and 15 minutes DuPont Tyvek 1073B Oliver-Tolas XHale 18B Coated EO exposure time per cycle: 0 hours and 30 minutes EO concentration: ppm 25 mil PETG tray Maximum temperature: 133 F Maximum relative humidity: 90% Maximum pressure rate change: 9.7 psi/min are trademarks or registered trademarks of E.I. du Pont de Nemours and Company or its affiliates. (02/14)
39 DuPont Tyvek 1073B Coated Thermoformed tray EO Thermoformed tray with coated lid EO shallow draw Number of cycles: 2 DuPont Tyvek 1073B Oliver-Tolas SealScience TPT-021C Coated Total time per cycle (excluding pre- and post-conditioning): 6 hours and 45 minutes EO exposure time per cycle: 4 hours and 0 minutes EO concentration: 550 ppm 25 mil PETG tray Maximum temperature: 130 F Maximum relative humidity: 75% Maximum pressure rate change: 0.7 psi/min
40 DuPont Tyvek 1073B Coated Thermoformed tray EO Thermoformed tray with coated lid EO deep draw Number of cycles: 1 Total time per cycle (excluding pre- and post-conditioning): 6 hours and 22 minutes DuPont Tyvek 1073B Oliver-Tolas XHale 10MP Coated EO exposure time per cycle: 4-5 hours and 0 minutes EO concentration: 888 ppm 24 mil PETG tray Maximum temperature: 127 F Maximum relative humidity: 80% Maximum pressure rate change: 1.6 psi/min
41 DuPont Tyvek 1073B Coated Thermoformed tray EO Thermoformed tray with coated lid EO shallow draw Number of cycles: 1 Total time per cycle (excluding pre- and post-conditioning): 9 hours and 30 minutes DuPont Tyvek 1073B Perfecseal SBP2000 EU Coated EO exposure time per cycle: 3 hours and 0 minutes EO concentration: 584 ppm 28 mil PETG tray Maximum temperature: 113 F Maximum relative humidity: 75% Maximum pressure rate change: 0.6 psi/min
42 DuPont Tyvek 1073B Coated Thermoformed tray EO Thermoformed tray with coated lid EO shallow draw Number of cycles: 2 Total time per cycle (excluding pre- and post-conditioning): 6-9 hours and 0 minutes DuPont Tyvek 1073B Oliver-Tolas XHale 18B Coated EO exposure time per cycle: 6-9 hours and 0 minutes EO concentration: 520 ppm 39 mil PS tray Maximum temperature: 140 F Maximum relative humidity: 60% Maximum pressure rate change: 1.5 psi/min
43 DuPont Tyvek 1073B Coated Thermoformed tray EO Thermoformed tray with coated lid EO deep draw Number of cycles: 3 Total time per cycle (excluding pre- and post-conditioning): 12 hours and 10 minutes DuPont Tyvek 1073B Perfecseal SBP2001 Coated EO exposure time per cycle: 5 hours and 30 minutes EO concentration: >661 ppm 30 mil HIPS tray Maximum temperature: 135 F Maximum relative humidity: 60% Maximum pressure rate change: 0.7 psi/min
44 DuPont Tyvek 1073B Coated Thermoformed tray EO Thermoformed tray with coated lid EO deep draw Number of cycles: 1 Total time per cycle (including pre- and post-conditioning): 22 hours and 0 minutes DuPont Tyvek 1073B Oliver-Tolas XHale 18B Coated EO exposure time per cycle: ~2 hours and 0 minutes EO concentration: 585 ppm 30 mil PS tray Maximum temperature: 125 F Maximum relative humidity: ~100% Maximum pressure rate change: 0.9 psi/min
45 DuPont Tyvek 1073B Coated Thermoformed tray EO Thermoformed tray with coated lid EO shallow draw Number of cycles: 2 DuPont Tyvek 1073B Oliver-Tolas SealScience TPT-0260 Coated Total time per cycle (excluding pre- and post-conditioning): 9 hours and 30 minutes EO exposure time per cycle: 4 hours and 0 minutes EO concentration: >350 ppm 28 mil PETGAG tray Maximum temperature: 131 F Maximum relative humidity: 65% Maximum pressure rate change: 0.6 psi/min
46 DuPont Tyvek 1073B Coated Thermoformed tray EO Thermoformed tray with coated lid EO deep draw Number of cycles: 3 Total time per cycle (excluding pre- and post-conditioning): ~4 hours and 30 minutes DuPont Tyvek 1073B Oliver-Tolas XHale 18B Coated EO exposure time per cycle: 1 hours and 15 minutes EO concentration: >700 ppm 30 mil PVC tray Maximum temperature: 131 F Maximum relative humidity: 85% Maximum pressure rate change: 1.5 psi/min
47 DuPont Tyvek 1073B Coated Pouch Gamma Chevron peel pouch Gamma Number of Exposures: 1 Minimum total dose of 21 kgy Maximum total dose of 40 kgy DuPont Tyvek 1073B Perfecseal CR27 Coated PerfecForm ICE O 4 mil Nylon Film
48 DuPont Tyvek 1073B Coated Pouch Gamma Chevron peel pouch Gamma Number of Exposures: 1 Minimum total dose of 25 kgy Maximum total dose of 45 kgy DuPont Tyvek 1073B Perfecseal CR27 Coated Perfecflex E 48-gauge PET/1.5 mil PE Film
49 DuPont Tyvek 1073B Uncoated Pouch Gamma Chevron peel pouch Gamma Number of Exposures: 2 Minimum total dose of 50 kgy Maximum total dose of 70 kgy DuPont Tyvek 1073B Beacon Converters Uncoated Beacon Converters A20 48-gauge PET/2 mil LDPE Film
50 DuPont Tyvek 1073B Uncoated Pouch Gamma Chevron peel pouch Gamma Number of Exposures: 1 Minimum total dose of 25 kgy Maximum total dose of 40 kgy DuPont Tyvek 1073B PeelMaster Uncoated PeelMaster 48-gauge PET/2 mil LDPE Film
51 DuPont Tyvek 1073B Uncoated Pouch Gamma Chevron peel pouch Gamma Number of Exposures: 1 Minimum total dose of 25 kgy Maximum total dose of 40 kgy DuPont Tyvek 1073B Mangar Industries Uncoated 100-gauge Biax Nylon/2 mil PE Film
52 DuPont Tyvek 1073B Coated FFS flexible blister Gamma FFS flexible blister Gamma Number of Exposures: 1 Minimum total dose of 25 kgy Maximum total dose of 40 kgy DuPont Tyvek 1073B Perfecseal SBP2000 Coated PerfecForm ESE MM 10 mil EVA/Surlyn/EVA Forming Film
53 DuPont Tyvek 1073B Coated FFS flexible blister Gamma FFS flexible blister Gamma Number of Exposures: 2 Minimum total dose of 95 kgy Maximum total dose of 110 kgy DuPont Tyvek 1073B Perfecseal SBP2000 Coated PerfecForm ESE O 4 mil EVA/Surlyn/EVA Forming Film
54 DuPont Tyvek 1073B Coated FFS flexible blister Gamma FFS flexible blister Gamma Number of Exposures: 2 Minimum total dose of 55 kgy Maximum total dose of 70 kgy DuPont Tyvek 1073B Perfecseal CR27 Coated Amcor Flexibles Inc. 12 mil EVA/Ionomer/EVA Forming Film
55 DuPont Tyvek 1059B Coated FFS flexible blister Gamma FFS flexible blister Gamma Number of Exposures: 1 Minimum total dose of 25 kgy Maximum total dose of 40 kgy DuPont Tyvek 1059B Perfecseal SBP2000 Coated Amcor Flexibles Inc. 10 mil Coex Metallocene Forming Film
56 DuPont Tyvek 1073B Coated Thermoformed tray Gamma Thermoformed tray with coated lid Gamma Number of Exposures: 2 Minimum total dose of 54 kgy Maximum total dose of 72 kgy DuPont Tyvek 1073B Oliver-Tolas XHale 10MP Coated 32 mil PETG tray
57 DuPont Tyvek 1073B Coated Thermoformed tray Gamma Thermoformed tray with coated lid Gamma Number of Exposures: 1 Minimum total dose of 25 kgy Maximum total dose of 45 kgy DuPont Tyvek 1073B Perfecseal CR27 Coated 50 mil PETG tray
58 DuPont Tyvek 1073B Coated Thermoformed tray Gamma Thermoformed tray with coated lid Gamma Number of Exposures: 2 Minimum total dose of 50 kgy Maximum total dose of 80 kgy DuPont Tyvek 1073B Amcor Flexibles Inc. Coated 40 mil PETG tray
59 DuPont Tyvek 1073B Coated Thermoformed tray Gamma Thermoformed tray with coated lid Gamma Number of Exposures: 1 Minimum total dose of 21 kgy Maximum total dose of 40 kgy DuPont Tyvek 1073B Amcor Flexibles Inc. Coated 20 mil PETG tray
60 DuPont Tyvek 1073B Coated Thermoformed tray Gamma Thermoformed tray with coated lid Gamma Number of Exposures: 1 Minimum total dose of 25 kgy Maximum total dose of 40 kgy DuPont Tyvek 1073B Perfecseal HCW CR27 Coated 40 mil PETG tray
61 DuPont Tyvek 1073B Coated Thermoformed tray Gamma Thermoformed tray with coated lid Gamma Number of Exposures: Cumulative Minimum total dose of 100 kgy Maximum total dose of 133 kgy DuPont Tyvek 1073B Perfecseal HCW CR27 Coated 40 mil PETG tray are trademarks or registered trademarks of E.I. du Pont de Nemours and Company or its affiliates. (02/14)
62 DuPont Tyvek 1073B Coated Thermoformed tray Gamma Thermoformed tray with coated lid Gamma Number of Exposures: 1 Minimum total dose of 50 kgy Maximum total dose of 80 kgy DuPont Tyvek 1073B Oliver-Tolas XHale 18B Coated 25 mil PETG tray
63 DuPont Tyvek 1073B Coated Thermoformed tray Gamma Thermoformed tray with coated lid Gamma DuPont Tyvek 1073B Oliver-Tolas SealScience TPT-0260 Coated Number of Exposures: 1 Minimum total dose of 43 kgy Maximum total dose of 55 kgy 25 mil PETG tray
64 DuPont Tyvek 1073B Uncoated Pouch Electron-beam Chevron peel pouch Electron-beam Number of Exposures: 1 Minimum total dose of 28 kgy Maximum total dose of 42 kgy DuPont Tyvek 1073B Beacon Converters Uncoated Beacon Converters A23 92-gauge PET/2 mil LDPE Film
65 DuPont Tyvek 1073B Uncoated Pouch Electron-beam Chevron peel pouch Electron-beam Number of Exposures: 1 Minimum total dose of 25 kgy Maximum total dose of 65 kgy DuPont Tyvek 1073B Mangar Industries Uncoated 100-gauge Biax Nylon/2 mil PE Film
66 DuPont Tyvek 1073B Coated FFS rigid blister Electron-beam FFS rigid blister Electron-beam Number of Exposures: 1 Minimum total dose of 26 kgy Maximum total dose of 50 kgy DuPont Tyvek 1073B Oliver-Tolas XHale 18B Coated 40 mil HIPS Forming Film
67 DuPont Tyvek 1073B Coated FFS flexible blister Electron-beam FFS flexible blister Electron-beam Number of Exposures: 1 Minimum total dose of 18 kgy Maximum total dose of 45 kgy DuPont Tyvek 1073B Perfecseal CR27 Coated Amcor Flexibles Inc. 10 mil Ionomer/ULDPE/EVA Forming Film
68 DuPont Tyvek 1059B Coated FFS flexible blister Electron-beam FFS flexible blister Electron-beam Number of Exposures: 1 Minimum total dose of 21 kgy Maximum total dose of 51 kgy DuPont Tyvek 1059B Perfecseal SBP2000 Coated Amcor Flexibles Inc. 10 mil Coex Metallocene Forming Film
69 DuPont Tyvek 1073B Uncoated Weld seal bag Steam Weld seal bag Steam Number of cycles: 1 Total time per cycle: 2 hours and 0 minutes DuPont Tyvek 1073B Oliver-Tolas Uncoated Steam exposure time per cycle: ~0 hours and 30 minutes Maximum temperature: ~253 F Maximum pressure: 18 psia Oliver-Tolas TPF-0545A 3 mil HDPE Film
70 DuPont Tyvek 1073B Uncoated Pouch Steam Chevron peel pouch Steam Number of cycles: 1 Total time per cycle: 2 hours and 0 minutes DuPont Tyvek 1073B Oliver-Tolas Uncoated Steam exposure time per cycle: ~0 hours and 30 minutes Maximum temperature: ~253 F Maximum pressure: 18 psia Oliver-Tolas TPF-0563B 48-gauge PET/2 mil Polyolefin Peelable Sealant Film
71 DuPont Tyvek 1073B Coated Thermoformed tray Steam Thermoformed tray with coated lid Steam Number of cycles: 3 Total time per cycle: 3 hours and 0 minutes DuPont Tyvek 1073B Oliver-Tolas Osurance Zone Coated Steam exposure time per cycle: ~0 hours and 45 minutes Maximum temperature: ~257 F Maximum pressure: ~34 psia 20 mil PC tray
72 DuPont Tyvek 1073B Coated Thermoformed tray Steam Thermoformed tray with coated lid Steam Number of cycles: 1 Total time per cycle: 1 hours and 30 minutes DuPont Tyvek 1073B Oliver-Tolas XHale 24AL Coated Steam exposure time per cycle: 0 hours and 30 minutes Maximum temperature: 252 F Maximum pressure: 32 psia 25 mil PC tray
73 DuPont Tyvek 1073B Coated Thermoformed tray Steam Thermoformed tray with coated lid Steam Number of cycles: 3 Total time per cycle: ~2 hours and 1 minutes DuPont Tyvek 1073B Oliver-Tolas Osurance 24AL Coated Steam exposure time per cycle: ~0 hours and 46 minutes Maximum pressure: 32 psia Maximum temperature: ~253 F 30 mil PC tray
74 DuPont Tyvek 1073B Coated Thermoformed tray Dry Heat Thermoformed tray with coated lid Dry Heat Number of cycles: 1 Total time per cycle: 36 hours and 0 minutes DuPont Tyvek 1073B Oliver-Tolas Osurance Zone Coated Dry Heat exposure time per cycle: 34 hours and 0 minutes Maximum temperature: 251 F 30 mil PC tray
75 DuPont Tyvek 1073B Coated Pouch Low Temperature Oxidative Chevron peel pouch Low temperature oxidative sterilization (H2O2) Number of cycles: 2 Total time per cycle: ~3 hours and 10 minutes DuPont Tyvek 1073B Perfecseal CR27 EU Coated H2O2 exposure time per cycle: ~1 hours and 2 minutes Sterilant concentration: 59% Maximum temperature: ~149 F 0.5 mil PET/2.0 mil PE Film
76 DuPont Tyvek 1073B Coated Thermoformed tray Low Temperature Oxidative Thermoformed tray with coated lid Low temperature oxidative sterilization (C2H4O3) Number of cycles: 2 Total time per cycle: ~3 hours and 15 minutes DuPont Tyvek 1073B Perfecseal HCW CR27 Coated C2H4O3 exposure time per cycle: ~2 hours and 0 minutes Sterilant concentration: 5% Maximum temperature: 131 F 40 mil PETG tray are trademarks or registered trademarks of E.I. du Pont de Nemours and Company or its affiliates. (09/13)
Taking the Next Step to Reduce Flexible Packaging Waste and Cost
DuPont Packaging Profile Taking the Next Step to Reduce Flexible Packaging Waste and Cost W H I T E P A P E R Bernard Rioux DuPont Packaging Introduction Manufacturers of packaged goods everywhere face
DuPont Packaging & Industrial Polymers
DuPont Packaging & Industrial Polymers Bonding Unjoinable Polymers W H I T E P A P E R I Hwa Lee, Technical Fellow DuPont Packaging Introduction Although almost everything consumers buy comes in a package,
Need fresh ideas to cut your packaging cost?
Need fresh ideas to cut your packaging cost?...take a look at our new series of Super-Tough Surlyn Upgrade your packaging to meet today s brands and consumers needs (*) : Freshness Safety Convenience Taste
Sterile Medical Device Impulse Sealer Validation: Trials and Tribulations
Sterile Medical Device Impulse Sealer Validation: Trials and Tribulations Jan Gates PackWise Consulting March 14, 2013 General Outline Validation review Sealing review Sealing elements/information required
Packaging materials Course: Post-harvest technology and minimal processing of fruits and vegetables
Packaging materials Course: Post-harvest technology and minimal processing of fruits and vegetables Telma Delgado & Maria de Fátima Poças Packaging Department Biotechnology College Portuguese Catholic
DuPont Packaging & Industrial Polymers
DuPont Packaging & Industrial Polymers Easing Your Way to Reliable Peelable Seals W H I T E P A P E R Diane Hahm, Technical Consultant DuPont Packaging Introduction Packaged goods manufacturers are meeting
Oil Spill Cleanup Garment Options
Oil Spill Cleanup Garment Options DuPont Protection Technologies July 1, 2010 2 Oil Spill Nature of the Hazard Activities Boom Handling Equipment Maintenance Care of Wildlife Shoreline cleanup Skin Contact
More Flexural Strength for Thin Films
SD DUPRONT_PE11757_PE5_FIN.qxp 5.5.211 7:56 Uhr Seite 1 Special reprint from Kunststoffe international 5/211 Barry A.Morris, John D. Vansant and Karlheinz Hausmann More Flexural Strength for Thin Films
Understanding The American Recovery and Reinvestment Act of 2009. And Impact on the Energy Policy Act of 2005
Understanding The American Recovery and Reinvestment Act of 2009 And Impact on the Energy Policy Act of 2005 Disclaimer The information contained in this overview of American Recovery and Reinvestment
Multilayer packaging films 2011 Cologne 5-7 October 2011 organised by AMI
Multilayer packaging films 2011 Cologne 5-7 October 2011 organised by AMI Simultaneous orientation for barrier oriented film Presented by Giovanni Stocchetti GAP Classification of Biaxially Oriented Films
Effect of Sterilization Techniques on Polymers
Effect of Sterilization Techniques on Polymers Contents of Presentation Introduction to Polymers Properties and Stability of Polymers Affect of Ionising Radiation and Ethylene Oxide on Polymers The need
PackAge 2011 CONFERENCE A PRESENTATION ON. Barrier Packaging gof Pharmaceuticals
PackAge 2011 CONFERENCE A PRESENTATION ON Barrier Packaging gof Pharmaceuticals Focus BLISTER PACKAGING Benefits of a Blister Packs Convenient, easy to use and safe Increases compliance and adherence Easy
DuPont Kapton HN. polyimide film
DuPont Kapton HN polyimide film Technical Data Sheet DuPont Kapton HN general-purpose film has been used successfully in applications at temperatures as low as -269 C (-452 F) and as high as 400 C (752
nature invented packaging. We improved it. DuPont Tyvek PROTECTIVE PACKAGING
nature invented packaging. We improved it. DuPont Tyvek PROTECTIVE PACKAGING Why Tyvek? Since its discovery back in 1955, DuPont TM Tyvek has been used in various sectors for a wide range of purposes.
Stora Enso Barrier Coating Options. English
Stora Enso Barrier Coating Options English Replacing fossil-based materials with renewable materials There are no longer any excuses to opt for anything but a renewable packaging material. Even in demanding
DUPONT PERFORMANCE POLYMERS Joint Design: A Critical Factor in Strong Bonds GENERAL GUIDELINES FOR ULTRASONIC, VIBRATION AND SPIN WELDING
DUPONT PERFORMANCE POLYMERS Joint Design: A Critical Factor in Strong Bonds GENERAL GUIDELINES FOR ULTRASONIC, VIBRATION AND SPIN WELDING Introduction Welding techniques for assembling parts molded with
USING PRIMERS IN COMBINATION WITH ADHESIVE TIE-LAYER RESINS OR THEIR BLENDS TO MAKE STRUCTURES WITH UNIQUE PERFORMANCE.
USING PRIMERS IN COMBINATION WITH ADHESIVE TIE-LAYER RESINS OR THEIR BLENDS TO MAKE STRUCTURES WITH UNIQUE PERFORMANCE. Richard Allen, Ph.D. Mica Corporation 9 Mountain View Drive Shelton, CT 06484 USA
The Effect of Moisture on Blistering During the Heat-sealing of Paper and Foil Containing Packaging
The Effect of Moisture on Blistering During the Heat-sealing of Paper and Foil Containing Packaging By: Lee J Murray (Alcan Packaging 1 ) ABSTRACT Limiting the amount of moisture in paper included in impermeable
Introduction to SkyPURA
distribuito in Italia da: FERRO-PLAST SRL VIA GRANDI, 25 20090 VIMODRONE, MI Tel. +39 02 27409415 Fax +39 02 27409420 www.ferroplast.com info@ferroplast.com Introduction to SkyPURA 2015. Agenda [Session
DuPont Cromax Pro PAINTER S GUIDE
DuPont Cromax Pro PAINTER S GUIDE Innovation You Can Depend On TABLE OF CONTENTS 3 Surface Preparation............................. 5 Paint Mixing................................... 8 Basic Application
Rigid Packaging in PET Products, Production & Critical Success Factors
Rigid Packaging in PET Products, Production & Critical Success Factors Andreas Blin Sales and Product Manager CPP and PET-Sheet Brückner Maschinenbau GmbH & Co. KG Brückner Group Members Brückner Maschinenbau
Product Safety Summary Sheet
. Product Safety Summary Sheet DuPont Vinyl Acetate Chemical Identification, Product Identification or Common Name: CAS number: 108-05-4 CAS name: Acetic acid ethenyl ester EC Number: 203-545-4 IUPAC name:
Product Information. Thermal Properties of Elvax Measured by Differential Scanning Calorimeter (DSC) Summary
Product Information Thermal Properties of Elvax Measured by Differential Scanning Calorimeter (DSC) Summary The melting and freezing points of various Elvax ethylene vinyl acetate (EVA) polymers were measured
VIEW-PACK STERILISATION POUCHES
VIEW-PACK STERILISATION POUCHES E DESCRIPTION ITEM NUMBER SALES UNIT MINIMUM SALES UNIT View-Pack sterilisation pouches, 42 x 60 cm 500 pcs per box 1 box NL OMSCHRIJVING ARTIKELNUMMER VERKOOPSEENHEID MINIMUM
NOMEX MOISTURE EFFECTS AND PROCESSING INFORMATION FOR NOMEX PAPER PERFORM WHEN THE HEAT S ON1
NOMEX only by DuPont MOISTURE EFFECTS AND PROCESSING INFORMATION FOR NOMEX PAPER PERFORM WHEN THE HEAT S ON Introduction With increasing trends to tighter tolerances and process optimization, the issue
Understanding High Perm vs. Low Perm
Understanding High Perm vs. Low Perm Building Science Bulletin Figure A High perm(eability) vs. low perm(eability) within the housewrap category what does it mean and how does it affect your building practices?
Resistance of Plastics to Gamma Irradiation
Elastomers 1 MATERIAL TOLERANCE LEVEL (kgy) COMMENTS Butyl 50 Sheds particulate after irradiation. Ethylene Propylene 100 200 Crosslinks, yellows slightly. Diene Monomer (EPDM) Fluoro Elastomer 50 Avoid
Samco Scientific Liquid Handling Solutions
1 Samco Scientific Liquid Handling Solutions Our products have been delivering quality, safety and craftsmanship to the clinical, research and industrial markets since 1971. Our comprehensive range of
DuPont Kapton. polyimide film. General Specifications
DuPont Kapton polyimide film General Specifications Introduction DuPont manufactures and sells a variety of highquality polyimide film products in conformance with ISO 9002 certification. These specifications
Selecting a Moisture Barrier Bag
Selecting a Moisture Barrier Bag Before selecting a barrier bag, we need to examine test methods, barrier technologies, bag structures, and performance considerations. Basics Surface Mount Devices (SMD's)
Polypropylene Cast and Blown Film
At home in your world Polypropylene Cast and Blown Film Total Petrochemicals confirms its commitment to the film markets In its desire to serve its customers better, Total Petrochemicals has extended its
E. INTERNAL PACKAGING
ANTI-CRRSIN MEASURES E. INTERNAL PACKAGING 1. ANTI-CRRSIN MEASURES During transport, handling and storage especially during overseas shipping more intensive stresses occur, which are often not sufficiently
Selar PA. http://www.dupont.com/packaging/products/selar/pdsprint/pa3426_blends.html. DuPont Selar PA3426 Blends With Nylon 6. General Information
Page 1 of 11 Selar PA For more information, e-mail us at: packaging@dupont.com General Information Resin Description Selar PA3426 is an amorphous nylon (polyamide) resin that provides: O 2 and CO 2 barrier,
How To Build A Coextruded Film
Coextruded Film Structures of PLA and EVOH Presented by: Pablo J. Garcia Research Engineer Kuraray America Inc. EVAL Business Unit Outline Background and objectives PLA and EVOH Method & materials Results
WHITE PAPER April 18, 2016
WHITE PAPER April 18, 2016 Nitrogen Dioxide Biodecontamination: A New, Effective and Cost-saving Option for Biodecontaminating Syringe Tubs Prior to the Filling Line Prepared by: David Opie, PhD Maura
DuPont Personal Protection TECHNICAL BULLETIN NUCLEAR RISKS
DuPont Personal Protection TECHNICAL BULLETIN NUCLEAR RISKS Specific questions have arisen related to the recent disaster which has occurred in Japan. A question frequently asked relates to protection
Plastics: An Energy-Efficient Choice
Plastics: An Energy-Efficient Choice Introduction Plastics are derived from petroleum and natural gas. With increased public awareness and concern about waste and energy issues, some have questioned whether
Medical Device Packaging and Sterilization: What you need to know to protect your product
Medical Device Packaging and Sterilization: What you need to know to protect your product By Wanda I. Colón-Rivera, PE ASQ-CQA, CMQ/OE, CSSBB When a medical device manufacturer designs and develops an
The science of better-performing buildings.
The science of better-performing buildings. Small detail. Big impact. Of the hundreds of decisions you and your team make every day, choosing a weather barrier system containing either DuPont Tyvek CommercialWrap
APR Design for Recyclability Guidelines Section Excerpt
APR Design for Recyclability Guidelines Section Excerpt Please note: This is only one section excerpted from the Guidelines. The text of the entire document can be found elsewhere on the APR Website. PET
Packaging Validation according to ISO 11607
Synergy makes sence Packaging Validation according to ISO 11607 MG-FSI72-104 Last revision: March 2011 5, Chemin du Catupolan - 69120 Vaulx en Velin - France - Tel. 33 (0)4 72 81 22 62 - Fax : 33 (0)4
PET (Polyethylene Terephthalate, Resin Identification Code #1) PET Bottles (Carbonated Beverage, Water, and Custom Bottles)
PET (Polyethylene Terephthalate, Resin Identification Code #1) Highlights Non-PET package parts labels, closures, attachments should float in water Confirm adhesives used with pressure sensitive labels
Materials Matter. Better long-term PV system performance and higher financial returns
Materials Matter Better long-term PV system performance and higher financial returns As Lifetimes Improve, Investment Returns Improve. DuPont PV Materials Stand the Test of Time. The world s demand for
Inline Metallizing and Coating as a Way to Improve Barrier and Reduce Carbon Footprint
Inline Metallizing and Coating as a Way to Improve Barrier and Reduce Carbon Footprint 1 OUTLINE History of Inline or In Chamber Coating One step vs. two step process Barrier Properties of Inline Top-coated
Guideline for the validation of packaging processes according to ISO 11607-2
D 2596 F Supplement 2012 Guideline for the validation of packaging processes according to ISO 11607-2 Official publication of the German Society for Sterile Supply (DGSV e.v.) HAWO. PERFECTLY VALIDATED
DuPont Pyralux AP All-Polyimide Flexible Laminate A Family of High-Performance Adhesiveless Laminates for Flexible Printed Circuit Applications
Technical Information DuPont Pyralux AP All-Polyimide Flexible Laminate A Family of High-Performance Adhesiveless Laminates for Flexible Printed Circuit Applications Product Description Pyralux AP double-sided,
DuPont Kevlar The ScIence of cut PRoTecTIon
DuPont Kevlar The Science of Cut Protection Industry standards groups have made tremendous progress in testing and measuring the cut protective performance of gloves and apparel. DuPont has been a pioneer
EUROTUBO DELTALAB 4. PETRI DISHES AND LOOPS
77 78 90 x 14 mm Petri Dish Made in polystyrene. Vented. Supplied in groups of 20 units, packaged in heat sealed bags. Code 200200 is ASEPTIC. Code 200209 is sterile by gamma radiation. Suitable for automatic
PRODUCTS & SERVICES. Slide Closure Trash Can Liners Poly-Net & Mesh Stand-up Pouches
High Quality Competitive Pricing PRODUCTS & SERVICES On-Time Deliveries Technical Expertise Bags Flat Film Singlewound Materials LDPE Gusseted Doublewound LLDPE On rolls Centerfold HDPE Shrinkable Layflat
UNDERSTANDING PLASTIC FILM:
UNDERSTANDING PLASTIC FILM: Its Uses, Benefits and Waste Management Options Prepared for the American Plastics Council by Headley Pratt Consulting, December 1996. 1997 American Plastics Council, Inc. Printed
3M Dual Lock Reclosable Fastener
3 Dual Lock Reclosable Fasteners SJ3550CF (Type 250) SJ3551CF(Type 400) SJ3552CF(Type 170) Dual Lock Reclosable Fastener Black with a clear acrylic adhesive Product Information February, 2007 Product Description
Adhesive Transfer Tapes with Adhesive 200MP 467MP 468MP 467MPF 468MPF 7952MP 7955MP 7962MP 7965MP 9172MP 9185MP 9667MP 9668MP
Adhesive Transfer Tapes with Adhesive 200MP 467MP 468MP 467MPF 468MPF 7952MP 7955MP 7962MP 7965MP 9172MP 9185MP 9667MP 9668MP Technical Data March, 2014 Product Description 3M High Performance Acrylic
AIRTECH Lamination System
AIRTECH Lamination System The AIRTECH Lamination System is a system of products designed and manufactured utilizing our unique multilayer manufacturing technology. This provides the user with high performing,
Würth Elektronik ibe Automotive solutions
Würth Elektronik ibe Automotive solutions July 2016 Page 1 The Würth Group The Würth Group Over 69,000 employees, 11 billion sales More than 400 companies In more than 80 countries The Würth Elektronik
DuPont Tyvek Commercial Air Barrier Assemblies Exceed Air Barrier Association of America, ASHRAE 90.1
Building Science Bulletin DuPont Tyvek Commercial Air Barrier Assemblies Exceed Air Barrier Association of America, ASHRAE 90.1 and IECC Air Leakage Requirements When Tested in Accordance with ASTM E2357
DuPont Packaging & Industrial Polymers
DuPont Packaging & Industrial Polymers DuPont Biomax Thermal 300 Biomax Thermal Resins Product Data Sheet Description Product Description Biomax Thermal 300 is an ethylene copolymer with a nucleating agent
New Transparent High-Barrier Film for Advanced Retort Applications
New Transparent High-Barrier Film for Advanced Retort Applications Tatsuya Oshita KURARAY CO., LTD ABSTRACT KURARISTER TM, which is henceforth called Hybrid film, is a new transparent high-barrier film
Profiles On Display CERTIFIED ISO 9001:2000. Call Toll Free 1.800 279.0991 Canada 800.361.4774 Montreal 514.325.9840 www.plastifab.
From design to delivery Profiles On Display CERTIFIED ISO 9001:2000 Profiles On Display I n d u s t r i e s When Plastifab Industries and the former World Plastics combined their capabilities under one
1. Injection Molding (Thermoplastics)
1. Injection Molding (Thermoplastics) l Molding: Injection (thermoplastics) INJECTION MOLDING of thermoplastics is the equivalent of pressure die casting of metals. Molten polymer is injected under high
DuPont Flashing Systems Installation Guidelines
Installation Instructions for Integral Flanged Door FTER Water-Resistive Barrier (WRB) is Installed DuPont Flashing Systems Installation Guidelines INSTLLTION INSTRUCTIONS FOR INTEGRL FLNGED DOOR FTER
CRITICAL SELECTION OF PRIMARY PACKAGING. Shams Rustom Labopharm Sr. Director, Product Development & Manufacturing
CRITICAL SELECTION OF PRIMARY PACKAGING Shams Rustom Labopharm Sr. Director, Product Development & Manufacturing Outlines What is primary packaging? Types of Primary Packaging Selection criteria of primary
Wire and Cable Product Guide
Wire and Cable Product Guide Applications Elvax resins with low vinyl acetate content, typically 9 to 15%, are well suited for compounding into primary insulation of UL listed, type XHHW building wire,
Materials Matter For Higher Returns
Materials Matter For Higher Returns Innovating Photovoltaics: the Way Ahead Solar Europe Industry Initiative Milan, May 7th, 2013 Stephan Padlewski, PhD Marketing Manager, EMEA DuPont Photovoltaic Solutions
This presentation is courtesy of
This presentation is courtesy of Advances in Flexible Packaging Adhesives CPP Expo Presentation September, 2005 Nancy Smith Agenda Basic types/ functions of adhesives used in flexible packaging Laminating
SEAL STRENGTH AND PACKAGE INTEGRITY The Basics of Medical Package Testing
SEAL STRENGTH AND PACKAGE INTEGRITY The Basics of Medical Package Testing TM Electronics, Inc. Seal Strength and Package Integrity: The Basics of Medical Package Testing 2006 TM Electronics, Inc. Part
Flexible Packaging. Freedonia Private Companies Report #1412. Brochure Index. Report Publication Date: April 2001 Price: $3,200 Pages: 346
Freedonia Private Companies Report #1412 Flexible Packaging Flexible Packaging - Private Companies Report profiles more than 170 private U.S. producers and distributors of paper, plastic and other flexible
Corning Flexible Packaging Systems. Bioprocess Containers, Tank Liners, Tubing Sets and Custom Assembly Services
Corning Flexible Packaging Systems Bioprocess Containers, Tank Liners, Tubing Sets and Custom Assembly Services Flexible Packaging Systems Overview Corning flexible packaging systems are available in multiple
BIOPLASTICS & SUSTAINABILITY
BIOPLASTICS & SUSTAINABILITY Seminar Biobased Food Packaging FRANCOIS DE BIE 6/29/2015 Corbion Purac PLA cradle to cradle lifecycle 2 Bioplastics in the market today Albert Heijn Flex Pack 100% PLA Coca-Cola
MaxCell Technical Manual Design Parameters
MaxCell Technical Manual Design Parameters Breaking Strength by Product Style, lbs Product Style Standard MaxCell Fire Resistant MaxCell Test Method 4 Cell 2,750 2,200 ASTM D 5 Bellcore 5 5.. Cell 2,50
Safety. matters. CryoMACS Products
Safety matters CryoMACS Products CryoMACS Freezing Bags The right step towards safe more cryopreservation safety in cryopreserv Overwrap bag protects both sample and freezing bag during cryopreservation.
PRO-VAC 150-LG-75 VACUUM BAGGING FILM For low temperature cure up to 120 C
PRO-VAC 150-LG-75 VACUUM BAGGING FILM For low temperature cure up to 120 C A tough, puncture resistant co-extrusion of polyolefin and nylon based resins which are designed for use in the production of
Umbicut and Tyvek Work Together to Cut Potential for Neonate Infection
d January 2002 Volume 10, Issue 3 Tyvek A Medical Packaging Newsletter from DuPont Umbicut and Tyvek Work Together to Cut Potential for Neonate Infection In this Issue: Umbicut and Tyvek Work Together
Trust in plastics. We do in extrusion.
Trust in plastics. We do in extrusion. 01 THE BEST WAY TO PREDICT THE FUTURE IS TO INVENT IT Costruzioni Meccaniche Luigi Bandera is a global leader in designing and manufacturing extrusion lines for
White Paper. Recommendations for Installing Flash LEDs on Flex Circuits. By Shereen Lim. Abstract. What is a Flex Circuit?
Recommendations for Installing Flash LEDs on Circuits By Shereen Lim White Paper Abstract For the mobile market some PCB assemblies have been converted to flex circuit assemblies, in part because flex
DuPont Medical Packaging. technical reference guide
DuPont Medical Packaging technical reference guide 1 Introduction.......................................................... 1 2 Why DuPont is unique........................................... 3 3 DuPont
3M Electrically Conductive Adhesive Transfer Tape 9703
Technical Data April 2011 M Electrically Conductive Adhesive Transfer Tape 970 Product Description M Electrically Conductive Adhesive Transfer Tape 970 is a pressure sensitive adhesive (PSA) transfer tape
Heat Transfer. Condensation. Revaporization
Objectives Wrapping a Towel Around the Problem of Wet Packs Identify causes of wet packs in steam sterilization Review suggested documentation that can assist in solving wet pack problems Why are Wet Packs
HKAS666O ANTI-STATIC NYLON FILM
DATA SHEETS HKAS666O ANTI-STATIC NYLON FILM HKAS666O is a specially formulated nylon film based on nylon 6 polyamide resin. This film is a tough, versatile film which is ideally suited for physically demanding
Among the specialised plastic packaging systems, shrink packaging or commonly known
SHRINK PACKAGING AND STRETCH WRAPPING Among the specialised plastic packaging systems, shrink packaging or commonly known as shrink wrapping and stretch wrapping are very common and widely used. Though
syriq Glass Prefillable Syringes
syriq Glass Prefillable Syringes 2 SCHOTT is a leading international technology group in the areas of specialty glass and glass-ceramics. With more than 130 years of outstanding development, materials
Laminating Films - Heat Activated
Laminating Films - Heat Activated Print Guard UV This film features superb ultraviolet protection at low activation temperature (185º F - 195º F) and an aggressive solvent acrylic adhesive. Linerless Print
EVOH, Ethylene-Vinyl alcohol Copolymer EVASIN EV-4405V
CHANG CHUN PETROCHEMICAL CO., LTD. CCP 301 Songkiang Road, 7F, Taipei, TAIWAN Tel +886-2-2500-1800 Fax +886-2-2503-3378 EVOH, Ethylene-Vinyl alcohol Copolymer EVASIN EV-4405V Unmodified random Co-Polymer
The challenge of mixed plastics recycling. Luca Stramare R&D Manager COREPLA (Italy)
The challenge of mixed plastics recycling Luca Stramare R&D Manager COREPLA (Italy) 2 Plastic packaging Protection Convenience Information Producer Transport Marketing Consumer 3 The problem begins at
Your ideas. Our technologies.
Your ideas. Our technologies. For more than a decade, 3M has been a trusted supplier of advanced materials for the solar industry. Our broad range of products and technologies is designed to enhance performance,
Utility & Advantages of Electron Beam Curing in Flexible Packaging. San Jose State University Packaging Program Sayaka Uchida
Utility & Advantages of Electron Beam Curing in Flexible Packaging San Jose State University Packaging Program Sayaka Uchida March 12, 2008 Introduction Packaging is one of the largest areas of influence
TRANSPARENT HIGH-BARRIER RETORTABLE FILM
TRANSPARENT HIGH-BARRIER RETORTABLE FILM A clear choice for retort packaging Kuraray Co. Ltd. became known as a leader in gas barrier technology with EVAL EVOH. EVAL resins and films used in food packaging
Product Data Sheet 3M Mini-Clamp II Plug and Socket Wiremount Connectors
PD-0050 Product Data Sheet 3M Mini-Clamp II Plug and Socket Wiremount Connectors Page: 1 of 10 Table of Contents 1.0 SCOPE...2 2.0 PRODUCTS TESTED...2 2.1 Cables Tested...3 3.0 GENERAL CONDITIONS...4 3.1
TPO Waterproofing Systems using Novel Plastomers and Elastomers
TPO Waterproofing Systems using Novel Plastomers and Elastomers Stefan Ultsch DOW Europe GmbH Global Waterproofing Markets Applications, Requirements, and Trends Norms and Testing VERSIFY TM Plastomers
SCREEN PRINTING INSTRUCTIONS
SCREEN PRINTING INSTRUCTIONS For Photo-Imageable Solder Masks and Idents Type 5600 Two Part Solder Masks and Idents Mega Electronics Ltd., Mega House, Grip Industrial Estate, Linton, Cambridge, ENGLAND
Athena is the name given to our assortment of electronic tapes. products of the very highest quality. These tapes both conduct and
Electric Athena. Athena is the name given to our assortment of electronic tapes products of the very highest quality. These tapes both conduct and insulate against electricity, in addition to warmth and
DUPONT PERFORMANCE POLYMERS
DUPONT PERFORMANCE POLYMERS SELF TAPPING SCREWS: HOW TO CHOOSE THE RIGHT ONE Self-tapping screws provide an economical means of assembling components, especially where dissimilar materials must be joined
NDP-50 Specifications
NDP-50 Specifications Port Dimensions Intake & discharge connection: (164 GPM Max.) Polypropylene (PPG) 2" ANSI B16.5 #150 Kynar (PVDF) 2" ANSI B16.5 #150 Aluminum (ADC-12) 2" ANSI B16.5 #150 (with tapped
DUPONT TYVEK BUILDING WRAPS VS. ZIP SYSTEM WALL SHEATHING
TECH TALK DUPONT TYVEK BUILDING WRAPS VS. ZIP SYSTEM WALL SHEATHING DuPont offers six different DuPont Tyvek building wraps intended for use on a wide range of buildings from single family homes to high
Introduction: Background of the OIT Test:
The Effect of Hindered Phenol Stabilizers on Oxygen Induction Time (OIT) Measurements, and The Use of OIT Measurements to Predict Long Term Thermal Stability Philip Jacoby, Vice President of Technology,
Polyolefin Heat Shrink Tubing for Tight-Tolerance Medical Applications
Polyolefin Heat Shrink Tubing for Tight-Tolerance Medical Applications Understanding the Advantages and Development Process By Apur Lathiya Vice President and General Manager, Vesta Thermoplastics Division
1.5. UL flammability ratings. *Nylon 6.6 = Polyamide 6.6 is Halogen-free and Silicone-free.
1.5 UL flammability ratings WWW.CABLEJOINTS.CO.UK THORNE & DERRICK UK TEL 0044 191 490 1547 FAX 0044 191 477 5371 TEL 0044 117 977 4647 FAX 0044 117 977 5582 WWW.THORNEANDDERRICK.CO.UK Flammability ratings
Andrafol. Film laminated packaging steel.
Andrafol. Film laminated packaging steel. ThyssenKrupp Rasselstein ThyssenKrupp Andrafol. Product characteristics and benefits. Andrafol is a specially coated packaging material, offering the benefits
Aluminized Steel Type 1 STAINLESS 409 and 439
P R O D U C T D A T A B U L L E T I N Aluminized Steel Type 1 STAINLESS and Excellent Resistance to Pitting Corrosion from Road Salt Excellent Resistance to Muffler Condensate Corrosion Red Rust Protection
3M Products for Solar Energy. Designed for efficiency. Built to last.
3M Products for Solar Energy Designed for efficiency. Built to last. 2 3M Products for Solar Energy From factory to field, 3M is with you. Every step of the way. Making solar power more efficient. More
Pharmaceutical blister packaging: how barrier films work
white paper Pharmaceutical blister packaging: how barrier films work This paper outlines a simple approach to explain how packaging material works to provide barrier to moisture, oxygen, and gases and