AutoCAD & CADPIPE HVAC Template Drawing Setup
|
|
|
- Kory Grant
- 7 years ago
- Views:
Transcription
1 AutoCAD & CADPIPE HVAC Template Drawing Setup Setting up a template drawing ensures that when starting a new drawing the AutoCAD and CADPIPE settings are all setup and will be consistent in all drawings. Open the template drawing and use File\Save As so you retain the template drawing. You can now attach xrefs but we recommend using the AutoCAD drawing cleanup procedure on the xrefs first. 1. Setting up an AutoCAD template drawing. a) View\Viewports, this is a user option. b) Format\Layer, Add layers and set the parameters for all your layers including a viewport layer. Color Linetype Lineweight Transparency if needed Plot Style Plot New Viewport Freeze c) Format\Linetype, load any linetypes you use and set the global scale factor. d) Format\Lineweight, this is a user option. e) Format\Text Style, set the text styles your company uses. Note: Set the Width Factor to.65 or.75 so the text is compressed and takes up less space in your drawing. f) Format\Dimension Style, set a dimension style for your company and set all parameters within the Dimension Style Manager g) Format\Point Style, set to single point. Note: When plotting set the point style to nothing if you don t want to plot the nodes. h) Format\Drawing Units Length Type, set to Architectural Length Precision, set to 1/8 Angle Type, Decimal Degrees Angle Precision, set to 0.00 Insertion Scale, set to Inches i) Layout Tabs, setup the names and parameters. j) AutoCAD Tools\Options\Display Tab Set Contour lines per surface to 0 and check Draw true silhouettes for solids and surfaces. k) Make sure 3D Osnaps and Allow/Disallow Dynamic UCS are turned off. l) Setup a color table for plotting.
2 2. On the Design Pulldown menu or Design Toolbar select Configure Rectangular. a) Configure Rectangular Tab, select or turn on Lining Show Flanges Show Prompts Dialog, this is your Osnap selection Solids Collision Checking and select a Color Fitting Origin, At Top or At Bottom Show Join Point Icon, this is a user option
3 b) Text Options Tab, select or turn on Display Selected Tag Type, this is the information you want displayed in the drawing Tag Style, this is the symbol you would like displayed around the tag Text Size Options, set your text size for model and paper space Tag Options, set the Next Tag number to 1 Text Style
4 c) Tooltip Query Tab, select or turn on Show Dynamic Tooltip Query and Label Each Tip Available Tip Info, double click items you want added to Tip Info to Display Note: The items in the Tip Info to Display box can be placed in any order by using the up and down arrows.
5 3. On the Design Pulldown menu or Design Toolbar select Configure Round/Oval. a) Configure Round/Oval Tab, select or turn on Show Flanges Show Prompts Dialog, this is your Osnap selection Solids Rnd/Oval to Sqr Shape, Select In: Round and Out: Round Collision Checking and select a Color Fitting Origin, At Top or At Bottom Show Join Point Icon, this is a user option
6 b) Text Options Tab Display Selected Tag Type, this is the information you want displayed in the drawing Tag Style, this is the symbol you would like displayed around the tag Text Size Options, set your text size for model and paper space Tag Options, set the Next Tag number to 1 Text Style
7 c) Tooltip Query Tab, select or turn on Show Dynamic Tooltip Query and Label Each Tip Available Tip Info, double click items you want added to Tip Info to Display Note: The items in the Tip Info to Display box can be placed in any order by using the up and down arrows
8 4. On the Utilities Pulldown menu or Utilities Toolbar select Bom-to-Dwg Format. Note: You can create and save different report types for duct and accessories.
9 5. On the Accessories Pulldown menu or Accessories Toolbar select Configure Accessories. a) Configure Accessory Text/Layers Tab Item Kind, set your layer name and color for each Text Options, check Display Accessory Text and set your text size for model and paper space
10 b) Tooltip Query Tab Check Show Dynamic Tooltip Query and Label Each Tip Available Tip Info, double click items you want added to Tip Info to Display Note: The items in the Tip Info to Display box can be placed in any order by using the up and down arrows
11 6. On the Architectural Pulldown menu or Architectural Toolbar select Configure Architectural. a) Configure Architecture Tab Item Kind, set your layer name and color for each
12 b) Tooltip Query Tab, select or turn on Show Dynamic Tooltip Query and Label Each Tip Available Tip Info, double click items you want added to Tip Info to Display Note: The items in the Tip Info to Display box can be placed in any order by using the up and down arrows
13 7. On the Spec Pulldown menu, who will take responsibility? a) Default Lengths, for Rectangular and Round/Oval b) Rectangular Joints c) Round/Oval Joints d) Rectangular Fittings, these are the default dimensions for the fittings e) Round/Oval Fittings, these are the default dimensions for the fittings f) Rectangular Systems, for setting up a Rectangular System g) Round/Oval Systems, for setting up a Round/Oval System h) Descriptions, where you can add new descriptions for the items below Vanes Seams Gauge Material Lining Wrapper/Insulation Reinforcing i) Fittings Allowing Vanes, you can enable vanes for certain fittings and set the size of duct that the vanes are put in. j) Fab/Purchase Settings, if you set this up you can run separate reports for Fabrication and Purchased duct. k) Backup Databases l) Restore Databases
14 8. CADPIPE Databases are currently on each machine in the HvacDBS folder under C:\CP_Gen2\Commercial. They can be put on the network and mapped to from each machine through the Commercial.ini file. The Commercial.ini file is in the Windows folder under C:\. You need to change the path of the HvacData line on everyone s machine to match the drive and folder on the network.
Layouts, Plotting, Printing
Layouts, Plotting, Printing Sacramento City College Engineering Design Technology Layouts, Plotting, Printing 1 Objectives Print and plot a drawing. Set up layouts using title blocks and viewports. Create
FDOT Plans Production Tools
FDOT State Kit for AutoCAD Civil 3D Mike Racca CADD APPLICATIONS SUPPORT Florida Department of Transportation (ECSO) Email: Mike.Racca@dot.state.fl.us Phone: 850-245-1631 GENERAL Civil 3D Plan Production
TABLE OF CONTENTS. INTRODUCTION... 5 Advance Concrete... 5 Where to find information?... 6 INSTALLATION... 7 STARTING ADVANCE CONCRETE...
Starting Guide TABLE OF CONTENTS INTRODUCTION... 5 Advance Concrete... 5 Where to find information?... 6 INSTALLATION... 7 STARTING ADVANCE CONCRETE... 7 ADVANCE CONCRETE USER INTERFACE... 7 Other important
BLOCKS and AutoCAD DesignCenter
BLOCKS and AutoCAD DesignCenter Chapter Objectives After completing this chapter you should: 1. understand the concept of creating and inserting symbols in AutoCAD drawings; 2. be able to use the Block
Effective Collaboration using Revit Structure and AutoCAD MEP
REVIT STRUCTURE Effective Collaboration using Revit Structure and AutoCAD MEP This white paper explains how structural engineers using Revit Structure software and mechanical/electrical/plumbing (MEP)
Managing CAD Standards with AutoCAD
Managing CAD Standards with AutoCAD Craig P. Black - Fox Valley Technical College GD215-2 This class is for the CAD manager and the CAD operator looking for consistency among drawing files. We ll examine
Lesson Four 3D Modeling
Lesson Four 3D Modeling In this lesson you will learn how to: Easily Rotate the UCS to model in different planes Model lines in a method similar to drawing isometrics Create 3D Router Lines Automatically
There are two distinct working environments, or spaces, in which you can create objects in a drawing.
That CAD Girl J ennifer dib ona Website: www.thatcadgirl.com Email: thatcadgirl@aol.com Phone: (919) 417-8351 Fax: (919) 573-0351 Autocad Model Space and Paper Space Model Space vs. Paper Space Initial
Use this translator to save ArchiCAD layouts/views in DXF/DWG format if you plan to continue
Tip Sheet ArchiCAD 11 Mark Horrocks Graphisoft New Zealand May 2007 DWG Translator In Architectural practice you often send and receive content from co-working Structural, Mechanical or Electrical Engineers.
How To Print On A Computer On A Macbook With A Powerpoint 3D (For Free) On A Pc Or Macbook 2 (For Cheap) On Pc Or Pc Or Ipad (Forfree) On An Ipad 3D Or
AVERY DESIGNPro 5.5 Address Labels - Friendship Cards Database http://www.avery.com/avery/en_us/templates-%26-software/avery-designpro-for- PC.htm?N=0&refchannel=c042fd03ab30a110VgnVCM1000002118140aRCRD
To develop an understanding of the basic principles of drawing using AutoCAD. 3) Deduce the intersection lines for intersected cylinders.
PROGRAMME: COURSE NAME: NATIONAL DIPLOMA IN INTERIOR DESIGN COMPUTER AIDED DESIGN (2D) COURSE CODE: ARC 213 DURATION: 0 4 4 UNITS: GOAL: GENERAL OBJECTIVES: 4 UNIT To develop an understanding of the basic
Membership PLUS Backup/Restore
Membership PLUS Backup/Restore Backing up your files is the single most important thing you can do to protect them. The purpose of the backup process is to make it possible for you to restore information
AutoCAD 2009. New Icon Quick Reference
AutoCAD 2009 New Quick Reference Contents Chapter 1 New Quick Reference..................... 1 Toolbars................................... 1 3D Navigation Toolbar........................ 1 CAD Standards
Creating 2D Drawings from 3D AutoCAD Models
Creating 2D Drawings from 3D AutoCAD Models David Piggott CrWare, LP GD205-2P This class explores the various techniques in creating 2D part and assembly drawings from 3D AutoCAD models. As part of the
JumpStart Guide. Trimble QuickPen PipeDesigner 3D Software
L JumpStart Guide Trimble QuickPen PipeDesigner 3D Software Revision A February 2013 F Englewood Office Trimble Navigation Limited 384 Inverness Parkway, Suite 200 Englewood, Colorado 80112 (800) 234-3758
Using PowerPoint s Advanced Features. What Are Advanced Features? Basic Skills:
Using PowerPoint s Advanced Features September, 2003 Suzanne Czurylo czurylo@umich.edu For questions about using PowerPoint, please contact Software Support at umbssofthelp@umich.edu What Are Advanced
Session 25 Revit MEP Tips and Tricks
Session 25 Revit MEP Tips and Tricks Page 1 of 17 Sometimes it's the little things which make all the difference. I thought I would share some nifty tricks that can help make Revit MEP go down a little
AutoCAD 3D I. Module 6. Visualizing Multiview Drawings. Curriculum Development Unit PREPARED BY. August 2013
AutoCAD 3D I Module 6 Visualizing Multiview Drawings PREPARED BY Curriculum Development Unit August 2013 Applied Technology High Schools, 2013 Module 6 Visualizing Multiview Drawings Module Objectives
ZWCAD Professional vs. Standard vs. Academic
ZWCAD Professional vs. Standard vs. Academic Feature supported Feature not supported Compatibility with AutoCAD DWG & DXF File Format Support AutoCAD Command AutoCAD Menu(.mnu)& Alias Support TTF & SHX
To Begin Customize Office
To Begin Customize Office Each of us needs to set up a work environment that is comfortable and meets our individual needs. As you work with Office 2007, you may choose to modify the options that are available.
Microsoft Word 2011: Create a Table of Contents
Microsoft Word 2011: Create a Table of Contents Creating a Table of Contents for a document can be updated quickly any time you need to add or remove details for it will update page numbers for you. A
6. If you want to enter specific formats, click the Format Tab to auto format the information that is entered into the field.
Adobe Acrobat Professional X Part 3 - Creating Fillable Forms Preparing the Form Create the form in Word, including underlines, images and any other text you would like showing on the form. Convert the
Petrel TIPS&TRICKS from SCM
Petrel TIPS&TRICKS from SCM Maps: Knowledge Worth Sharing Map Annotation A map is a graphic representation of some part of the earth. In our industry, it may represent either the surface or sub surface;
Layout Tutorial. Chapter 10: Getting Started
Chapter 10: Layout Tutorial In this tutorial we will create a layout template, send a few views to a layout page, then save this document in PDF format. In this tutorial you will learn about: Creating
How To Create A View Frame In 3D
12/4/2008-10:00 am - 11:30 am Room:Palazzo O-P (5th) The Secrets of Cutting Plan and Profile Sheets in AutoCAD Civil 3D Michelle Rasmussen - Application Engineer, IMAGINiT Technologies CV304-1P In this
Embankment Consolidation
Embankment Consolidation 36-1 Embankment Consolidation In this tutorial, RS2 is used for a coupled analysis of a road embankment subject to loading from typical daily traffic. Model Start the RS2 9.0 Model
Recreate your Newsletter Content and Layout within Informz (Workshop) Monica Capogna and Dan Reade. Exercise: Creating two types of Story Layouts
Recreate your Newsletter Content and Layout within Informz (Workshop) Monica Capogna and Dan Reade Exercise: Creating two types of Story Layouts 1. Creating a basic story layout (with title and content)
What is new in WiseImage
Additional RAM support for 64-bit OS Now WiseImage installed on Windows 64-bit is able to use up to 3.5 3.7 GB of RAM, whereas the previous versions of WiseImage could not use more than 1.5 GB of RAM.
Microsoft Word 2010. Quick Reference Guide. Union Institute & University
Microsoft Word 2010 Quick Reference Guide Union Institute & University Contents Using Word Help (F1)... 4 Window Contents:... 4 File tab... 4 Quick Access Toolbar... 5 Backstage View... 5 The Ribbon...
Creating a table of contents quickly in Word
Creating a table of contents quickly in Word This note shows you how to set up a table of contents that can be generated and updated quickly and easily, even for the longest and most complex documents.
Pro/ENGINEER Wildfire 4.0 Basic Design
Introduction Datum features are non-solid features used during the construction of other features. The most common datum features include planes, axes, coordinate systems, and curves. Datum features do
Using Microsoft Word. Working With Objects
Using Microsoft Word Many Word documents will require elements that were created in programs other than Word, such as the picture to the right. Nontext elements in a document are referred to as Objects
University of Rochester
University of Rochester User s Guide to URGEMS Ad Hoc Reporting Guide Using IBM Cognos Workspace Advanced, Version 10.2.1 Version 1.0 April, 2016 1 P age Table of Contents Table of Contents... Error! Bookmark
TABLE OF CONTENTS I. MAIL MERGING...1 II. MAIL MERGE WIZARD...1 III. MAIL MERGE TOOLBAR...4 PRINTING LABELS AND ENVELOPES...4
TABLE OF CONTENTS I. MAIL MERGING...1 II. MAIL MERGE WIZARD...1 1. CREATING A NEW LETTER AND DATA LIST...1 2. CREATING A NEW LETTER USING AN EXISTING DATA LIST...3 III. MAIL MERGE TOOLBAR...4 MERGING EXISTING
DWG TrueConnect: Making These Autodesk Inventor Tools Work for You
DWG TrueConnect: Making These Autodesk Inventor Tools Work for You Walt Jaquith Simplex Manufacturing MA301-5L With the new release of Autodesk Inventor, Autodesk has introduced a set of tools called DWG
Microsoft Expression Web
Microsoft Expression Web Microsoft Expression Web is the new program from Microsoft to replace Frontpage as a website editing program. While the layout has changed, it still functions much the same as
Using an Automatic Back Up for Outlook 2003 and Outlook 2007 Personal Folders
Using an Automatic Back Up for Outlook 2003 and Outlook 2007 Personal Folders Part 1 Install the Personal Folder Backup Utility Note: You should close Outlook and any other applications before installing
Fireworks CS4 Tutorial Part 1: Intro
Fireworks CS4 Tutorial Part 1: Intro This Adobe Fireworks CS4 Tutorial will help you familiarize yourself with this image editing software and help you create a layout for a website. Fireworks CS4 is the
INTRODUCTION to ESRI ARCGIS For Visualization, CPSC 178
INTRODUCTION to ESRI ARCGIS For Visualization, CPSC 178 1) Navigate to the C:/temp folder 2) Make a directory using your initials. 3) Use your web browser to navigate to www.library.yale.edu/mapcoll/ and
Layout Tutorial. Chapter 10: Getting Started
Chapter 10: Layout Tutorial In this tutorial we will create a layout template, send a few views to a layout page, then save this document in PDF format. In this tutorial you will learn about: Creating
Creating tables of contents and figures in Word 2013
Creating tables of contents and figures in Word 2013 Information Services Creating tables of contents and figures in Word 2013 This note shows you how to create a table of contents or a table of figures
Applying a circular load. Immediate and consolidation settlement. Deformed contours. Query points and query lines. Graph query.
Quick Start Tutorial 1-1 Quick Start Tutorial This quick start tutorial will cover some of the basic features of Settle3D. A circular load is applied to a single soil layer and settlements are examined.
Microsoft Word 2010. Revising Word Documents Using Markup Tools
Microsoft Word 2010 Revising Word Documents Using Markup Tools Preface Word provides several markup tools that make document collaboration easy. Color coding, highlighting, and the ability maintain multiple
Converting an AutoCAD Drawing into PDF File
Tutorial Created by Brijesh Bhatha, 2004. Updated 2006 by Corinne Stewart (corinnestewart@gmail.com) CP-208 Plan Preparation Studio - Prof. Elizabeth Macdonald 2 In this tutorial we will learn to create
Presentations and PowerPoint
V-1.1 PART V Presentations and PowerPoint V-1.2 Computer Fundamentals V-1.3 LESSON 1 Creating a Presentation After completing this lesson, you will be able to: Start Microsoft PowerPoint. Explore the PowerPoint
Email Basics. a. Click the arrow to the right of the Options button, and then click Bcc.
Email Basics Add CC or BCC You can display the Bcc box in all new messages that you compose. In a new message, do one of the following: 1. If Microsoft Word is your e-mail editor a. Click the arrow to
Layout Tutorial. Getting Started
Getting Started Layout Tutorial This tutorial will explain how create a layout template, send views to a layout page, then save the document in PDF format. In this tutorial you will learn about: Creating
Autodesk Civil 3D Styles: A Guide to the Fundamentals
AUTODESK CIVIL 3D WHITE PAPER Autodesk Civil 3D Styles: A Guide to the Fundamentals About the Author: Mark Scacco, PE, is the founder and president of Engineered Efficiency, Inc., a technology consulting
Information Technology Solutions
Connecting People, Process Information & Data Network Systems Diagnostic Testing Information Technology Solutions Getting started in Workflow Designer Prior Learning 1. While it helps to have some knowledge
TRIAL SOFTWARE GUIDE 1. PURPOSE OF THIS GUIDE 2. DOWNLOAD THE TRIALSOFTWARE 3. START WIDS 4. OPEN A SAMPLE COURSE, PROGRAM
TRIAL SOFTWARE GUIDE Thank you for trying the WIDS software! We appreciate your interest and look forward to hearing from you. Please contact us at (800) 677-9437 if you have any questions about your trial
Producing 2D Documentation from 3D Models in AutoCAD
Producing 2D Documentation from 3D Models in AutoCAD David Cohn 4D Technologies AC4689 Modeling in 3D is fine, but eventually you need to produce 2D drawings. In this class, you will learn about tools
Table of Contents. 9. Appendix B: Production Command Reference... 375 10. Appendix C: Distributed Systems Production Reference...
Table of Contents General Setup............................................ 4 ShipConstructor....................................................... 4 Getting Started........................................................
This Skill Builder demonstrates how to define and place sketched symbols in drawings.
Sketched Symbols This Skill Builder demonstrates how to define and place sketched symbols in drawings. A sketched symbol is a user-defined symbol. You create sketched symbols in the sketch environment
Publisher 2010 Cheat Sheet
April 20, 2012 Publisher 2010 Cheat Sheet Toolbar customize click on arrow and then check the ones you want a shortcut for File Tab (has new, open save, print, and shows recent documents, and has choices
16.4.3 Lab: Data Backup and Recovery in Windows XP
16.4.3 Lab: Data Backup and Recovery in Windows XP Introduction Print and complete this lab. In this lab, you will back up data. You will also perform a recovery of the data. Recommended Equipment The
Overview... 2 How to Add New Documents... 3 Adding a Note / SMS or Phone Message... 3 Adding a New Letter... 4. How to Create Letter Templates...
THE DOCUMENT MANAGER Chapter 14 THE DOCUMENT MANAGER CONTENTS Overview... 2 How to Add New Documents... 3 Adding a Note / SMS or Phone Message... 3 Adding a New Letter... 4 How to Create Letter Templates...
Software for Producing Rack Layouts and Purchase Orders
1 Software for Producing Rack Layouts and Purchase Orders Welcome to RackTools: software that makes it simple and quick to specify Middle Atlantic Products. RackTools has been designed with one purpose
Microsoft Office PowerPoint 2003. Creating a new presentation from a design template. Creating a new presentation from a design template
Microsoft Office PowerPoint 2003 Tutorial 2 Applying and Modifying Text and Graphic Objects 1 Creating a new presentation from a design template Click File on the menu bar, and then click New Click the
Making a Poster Using PowerPoint 2007
Making a Poster Using PowerPoint 2007 1. Start PowerPoint: A Blank presentation appears as a Content Layout, a blank one one without anything not even a title. 2. Choose the size of your poster: Click
Creating a Poster Presentation using PowerPoint
Creating a Poster Presentation using PowerPoint Course Description: This course is designed to assist you in creating eye-catching effective posters for presentation of research findings at scientific
ShipConstructor. By ARL - Albacore Research Ltd.
ShipConstructor By ARL - Albacore Research Ltd. Albacore Research Ltd. License Agreement This is a legal agreement between the end-user and Albacore Research Ltd. By opening this package the user agrees
How to Fix Time Matters. 2011 Active Practice LLC
How to Fix Time Matters How to Fix Time Matters Troubleshooting tips, techniques and solutions by Wells H. Anderson, J.D., CIC. Contents 3 Table of Contents Part I Backing Up Time Matters 4 1 Manual...
THURSTON COUNTY PUBLIC WORKS DEPARTMENT Design and Construction Division. CADD & Civil 3D User Guidelines. v2.0_12_12_09
THURSTON COUNTY PUBLIC WORKS DEPARTMENT Design and Construction Division CADD & Civil 3D User Guidelines v2.0_12_12_09 THURSTON COUNTY PUBLIC WORKS DEPARTMENT DESIGN AND CONSTRUCTION DIVISION CADD & Civil
What's New in ADP Reporting?
What's New in ADP Reporting? Welcome to the latest version of ADP Reporting! This release includes the following new features and enhancements. Use the links below to learn more about each one. What's
File Folders. To produce a file folder you have the following options:
File Folders To produce a file folder you have the following options: Option 1: Supply us with the file for the full outside of the file folder and another file for the full inside of the file folder (see
Microsoft Word 2010 Prepared by Computing Services at the Eastman School of Music July 2010
Microsoft Word 2010 Prepared by Computing Services at the Eastman School of Music July 2010 Contents Microsoft Office Interface... 4 File Ribbon Tab... 5 Microsoft Office Quick Access Toolbar... 6 Appearance
OUTLOOK 2013 - GETTING STARTED
OUTLOOK 2013 - GETTING STARTED Information Technology September 1, 2014 1 GETTING STARTED IN OUTLOOK 2013 Backstage View Ribbon Navigation Pane View Pane Navigation Bar Reading Pane 2 Backstage View contains
Learn how to create web enabled (browser) forms in InfoPath 2013 and publish them in SharePoint 2013. InfoPath 2013 Web Enabled (Browser) forms
Learn how to create web enabled (browser) forms in InfoPath 2013 and publish them in SharePoint 2013. InfoPath 2013 Web Enabled (Browser) forms InfoPath 2013 Web Enabled (Browser) forms Creating Web Enabled
IBM Rational University. Essentials of IBM Rational RequisitePro v7.0 REQ370 / RR331 October 2006 Student Workbook Part No.
IBM Rational University Essentials of IBM Rational RequisitePro v7.0 REQ370 / RR331 October 2006 Student Workbook Part No. 800-027250-000 IBM Corporation Rational University REQ370 / RR331 Essentials of
NextGen Setup Guide First-time Workstation Setup & Logging In
This guide will help you get setup on NextGen for the first time you log onto a City or SBC computer. It will also help if you are a first-time user and need to create your password. I. Setting up Desktop
Add an E-Commerce Catalog to your Website
Page 1 of 20 Add an E-Commerce Catalog to your Website Creating an E-Commerce Catalog In this tutorial, you build an e-commerce catalog that includes products which will assist hikers on expeditions. Using
Fireworks 3 Animation and Rollovers
Fireworks 3 Animation and Rollovers What is Fireworks Fireworks is Web graphics program designed by Macromedia. It enables users to create any sort of graphics as well as to import GIF, JPEG, PNG photos
Snap 9 Professional s Scanning Module
Miami s Quick Start Guide for Using Snap 9 Professional s Scanning Module to Create a Scannable Paper Survey Miami s Survey Solutions Snap 9 Professional Scanning Module Overview The Snap Scanning Module
ESRI China (Hong Kong) Limited
Tips for Creating 3D Graphics in ArcScene 9.x Article ID : 100003 Software : ArcGIS 3D Analyst 9.x Platform : Windows 2000, Windows XP Date : June 28, 2005 Background Prior to ArcGIS Desktop 9.0, we cannot
Setup CMS 1500 (02/12) Claim Form
Setup CMS-1500 (02/12) Claim Form Setup CMS 1500 (02/12) Claim Form The CMS 1500 (02/12) Form was added in Helper 8.1. Clients who upgrade from a version prior to 8.1 have two options; update an existing
Assignment 3 Floor Plan CAD Fundamentals I Due February 1 Architecture 411
Due February 1 Architecture 411 Objective To learn to draft precise architectural plan drawings. To gain experience with CAD drafting tools and techniques. Exercise 1. Come up with a floor plan for a residence
MICROSOFT ACCESS 2007 BOOK 2
MICROSOFT ACCESS 2007 BOOK 2 4.1 INTRODUCTION TO ACCESS FIRST ENCOUNTER WITH ACCESS 2007 P 205 Access is activated by means of Start, Programs, Microsoft Access or clicking on the icon. The window opened
How To Sync Between Quickbooks And Act
QSalesData User Guide Note: In addition to this User Guide, we have an extensive Online Video Library that you can access from our website: www.qsalesdata.com/onlinevideos Updated: 11/14/2014 Installing
Data Visualization. Prepared by Francisco Olivera, Ph.D., Srikanth Koka Department of Civil Engineering Texas A&M University February 2004
Data Visualization Prepared by Francisco Olivera, Ph.D., Srikanth Koka Department of Civil Engineering Texas A&M University February 2004 Contents Brief Overview of ArcMap Goals of the Exercise Computer
Flash MX Image Animation
Flash MX Image Animation Introduction (Preparing the Stage) Movie Property Definitions: Go to the Properties panel at the bottom of the window to choose the frame rate, width, height, and background color
Edinburgh COLLEGE of ART ARCHITECTURE 3D Modelling in AutoCAD - tutorial exercise The screen The graphics area This is the part of the screen in which the drawing will be created. The command prompt area
10.3.1.6 Lab - Data Backup and Recovery in Windows XP
5.0 10.3.1.6 Lab - Data Backup and Recovery in Windows XP Introduction Print and complete this lab. In this lab, you will back up data. You will also perform a recovery of the data. Recommended Equipment
AutoDWG DWGSee DWG Viewer. DWGSee User Guide
DWGSee User Guide DWGSee is comprehensive software for viewing, printing, marking and sharing DWG files. It is fast, powerful and easy-to-use for every expert and beginners. Starting DWGSee After you install
OnPoint 7.0 Tools and Functionality
P a g e 1 OnPoint 7.0 Tools and Functionality The new version of the OnPoint website has the same functionality as the old site, but the look and feel of the page has changed. This document will compare
Advanced Presentation Features and Animation
There are three features that you should remember as you work within PowerPoint 2007: the Microsoft Office Button, the Quick Access Toolbar, and the Ribbon. The function of these features will be more
Weld Design. CATIA V5 Training Foils. Weld Design. Copyright DASSAULT SYSTEMES 1. Instructor Notes:
CATIA V5 Training Foils Weld Design Version 5 Release 19 January 2009 EDU_CAT_EN_WD1_FI_V5R19 1 About this course Objectives of the course Upon completion of this course you will be able to: - Weld parts,
Basic Formatting of a Microsoft Word. Document for Word 2003 and 2007. Center for Writing Excellence
Basic Formatting 1 Basic Formatting of a Microsoft Word Document for Word 2003 and 2007 Center for Writing Excellence Updated April 2009 Basic Formatting 2 Table of Contents GENERAL FORMATTING INFORMATION...
ecw Weekly Users Tip: My Settings: Template-Friendly Settings & My Favorites: Templates
ecw Weekly Users Tip: My Settings: Template-Friendly Settings & My Favorites: Templates Templates, regardless of how basic or how comprehensive, can make your notes overwhelming and visually harder to
Produced by Flinders University Centre for Educational ICT. PivotTables Excel 2010
Produced by Flinders University Centre for Educational ICT PivotTables Excel 2010 CONTENTS Layout... 1 The Ribbon Bar... 2 Minimising the Ribbon Bar... 2 The File Tab... 3 What the Commands and Buttons
Entire Connection Version 4.2.1
Entire Connection Entire Connection is a software package that allows users to log on to FAMIS and download and print screens in FAMIS. Once logged on to FAMIS, see M08 for Entire Connection Download screens,
SAVEAS Saves the current drawing using a new file name, opens the newly named file and closes the drawing with the old name.
That CAD Girl J ennifer dib ona Website: www.thatcadgirl.com Email: jennifer@thatcadgirl.com Phone: (919) 417-8351 Fax: (919) 573-0351 Introduction to Autocad and IntelliCAD Command List This document
How to use Wireframe in Visio
Visio Tutorial: How to use Wireframe How to use Wireframe in Visio By Derek Tobler Table of Contents Getting started... 2 To start go to the Start icon and click on it. Then type Visio in the Search programs
Excel -- Creating Charts
Excel -- Creating Charts The saying goes, A picture is worth a thousand words, and so true. Professional looking charts give visual enhancement to your statistics, fiscal reports or presentation. Excel
CXQuotes Doors and Windows Quotation software. Cogitrix
CXQuotes Doors and Windows Quotation software Cogitrix Table of content TABLE OF CONTENT... 2 TABLES OF PICTURES... 6 SOFTWARE FEATURES... 7 QUICK...7 REDUCING ERRORS...7 PRINT QUALITY...7 PRICES COMPARISON...7
In this example, Mrs. Smith is looking to create graphs that represent the ethnic diversity of the 24 students in her 4 th grade class.
Creating a Pie Graph Step-by-step directions In this example, Mrs. Smith is looking to create graphs that represent the ethnic diversity of the 24 students in her 4 th grade class. 1. Enter Data A. Open
Frog VLE Update. Latest Features and Enhancements. September 2014
1 Frog VLE Update Latest Features and Enhancements September 2014 2 Frog VLE Update: September 2014 Contents New Features Overview... 1 Enhancements Overview... 2 New Features... 3 Site Backgrounds...
Autodesk Fusion 360 Badge Guide: Design an F1 in Schools Trophy
Autodesk Fusion 360 Badge Guide: Design an F1 in Schools Trophy Abstract: Gain basic understanding of creating 3D models in Fusion 360 by designing an F1 in Schools trophy. This badge may be claimed by
Administrator s Plus. Backup Process. A Get Started Guide
Administrator s Plus Backup Process A Get Started Guide Table of Contents Create a Backup... 1 Schedule an Automatic Backup... 3 Create a Backup Backing up your information is an important part of data
LEGENDplex Data Analysis Software
LEGENDplex Data Analysis Software Version 7.0 User Guide Copyright 2013-2014 VigeneTech. All rights reserved. Contents Introduction... 1 Lesson 1 - The Workspace... 2 Lesson 2 Quantitative Wizard... 3
Mail Merge: Create Mailing Labels Using Excel Data and Filtering the Contents in the Data
Mail Merge: Create Mailing Labels Using Excel Data and Filtering the Contents in the Data Prior to starting this, please save the.csv file that you exported as an excel file (example: xxxx.csv will now