STRUCTURE CABLING LAN CABLE & PATCH CORD

Transcription

1 NITOT ODUT INFOMATION NITOT ODUT INFOMATION & ATH AB & ATH O ODUT TIFIATS AT7A an able AT7 an able AT6A an able AT6 an able AT5 an able OTH an able AT6A atch ord AT6 atch ord AT5 atch ord FA AT MODUS ATH ANS OTIA FIB ABINTS page 001 page 002

2 NITOT ODUT INFOMATION NITOT ODUT INFOMATION & ATH AB S/FT Shielded AT 7A Twisted air Installation able I/ISO ISO/I 1101 Suitable for structured premises cabling. For transmission of digital and alogue voice and data sigls. specially suitable for all lass FA applications. ISDN,thernet Base-T,Fast thernet 0 Base-T, Gigabit thernet 00Base-T,G Base-T.(I 02.3). Token ing/mbit/s,t-md/t/ddi 1Mbit/s,ATM 155Mbit/s.(I 02.5 ). Impedance: - 0MHz 0±15 (ohms). 0-0MHz 0±22 (ohms). 0-00MHz 0±32 (ohms). Max. D esistance :.(ohms/0m). esistance unbalance (%):max 2.5. air-to-ground apacitance Unbalance:330 (pf/0m). Transfer Impendance:Max mohms/m@0mhz. oupling Attenuation: Min 0 db. Installation temperature:0~50. Operation temperature:-~ Al-mylar Foil Braid (skin-foam-skin) Solid Bare opper 23AWG (Skin-Foam-Skin) aluminum foil, providing 0% coverage, foil face out Tinned copper braid ropagation Skew SNXT NXT SNXT Frequency (min) I NXT (min) (MH)z (db) (db/0m) (ns/0m) (ns/0m) (db) (db) (db/0m) (db/0m) NTN7A SFT-_ olor Item Outer Overalldiameter(mm) S/FT Shielded AT 7 Twisted air Installation able I/ISO ISO/I 1101 Suitable for structured premises cabling. For transmission of digital and alogue voice and data sigls. specially suitable for all lass F applications. ISDN,thernet Base-T,Fast thernet 0 Base-T, Gigabit thernet 00Base-T,G Base-T.(I 02.3). Token ing/mbit/s,t-md/t/ddi 1Mbit/s,ATM 155Mbit/s.(I 02.5 ). Al-mylar Foil Impedance: - 0MHz 0±15 (ohms). 0-0MHz 0±22 (ohms) MHz 0±32 (ohms). Max. D esistance :.(ohms/0m). esistance unbalance (%): max 2.5. air-to-ground apacitance Unbalance:330 (pf/0m). Transfer Impendance:Max mohms/m@0mhz. oupling Attenuation: Min 0 db. Installation temperature:0~50. Operation temperature:-~ Braid (skin-foam-skin) Solid Bare opper 23AWG (Skin-Foam-Skin) aluminum foil, providing 0% coverage, foil face out Tinned copper braid ropagation Skew SNXT NXT SNXT Frequency (min) I NXT (min) (MH)z (db) (db/0m) (ns/0m) (ns/0m) (db) (db) (db/0m) (db/0m) NTN7 SFT2-_ olor Item Outer Overalldiameter(mm) (.5+.5)±0.3 (.5+.5)±0.3 (.5+.5)±0.3 (.5+.5)±0.3 (.5+.5)± FA AT MODUS ATH ANS OTIA FIB ABINTS page 003 page 00

3 NITOT ODUT INFOMATION NITOT ODUT INFOMATION & ATH AB S/FT Shielded AT 7 Twisted air Installation able I/ISO ISO/I 1101 Suitable for structured premises cabling. For transmission of digital and alogue voice and data sigls. specially suitable for all lass F applications. ISDN,thernet Base-T,Fast thernet 0 Base-T, Gigabit thernet 00Base-T,G Base-T.(I 02.3). Token ing/mbit/s,t-md/t/ddi 1Mbit/s,ATM 155Mbit/s.(I 02.5 ). Impedance: - 0MHz 0±15 (ohms). 0-0MHz 0±22 (ohms) MHz 0±32 (ohms). Max. D esistance :.(ohms/0m). esistance unbalance (%) :max 2.5. air-to-ground apacitance Unbalance:330 (pf/0m). Transfer Impendance:Max mohms/m@0mhz. oupling Attenuation: Min 0 db. Installation temperature:0~50. Operation temperature:-~ Al-mylar Foil Braid (skin-foam-skin) Solid Bare opper 23AWG (Skin-Foam-Skin) aluminum foil, providing 0% coverage, foil face out Tinned copper braid NTN7 SFT-_ olor ropagation Skew SNXT NXT SNXT Frequency (min) I NXT (min) (MH)z (db) (db/0m) (ns/0m) (ns/0m) (db) (db) (db/0m) (db/0m) Item Outer Overalldiameter(mm) S/FT Shielded AT 6A Twisted air Installation able I/ISO ANSI/TIA56.2 ISO/I 1101 Suitable for structured premises cabling. For transmission of digital and alogue voice and data sigls. specially suitable for all lass A applications. ISDN,thernet Base-T,Fast thernet 0 Base-T,Gigabit thernet 00Base-T,G Base-T.(I 02.3). Token ing/mbit/s,t-md/t/ddi 1Mbit/s, ATM 155Mbit/s.(I 02.5 ). Impedance: - 0MHz 0±15 (ohms). 0-0MHz 0±22 (ohms) MHz 0±32 (ohms). Max. D esistance :.7(ohms/0m). esistance unbalance (%):max 2.5. air-to-ground apacitance Unbalance 330 (pf/0m). Transfer Impendance:Max mohms/m@0mhz. oupling Attenuation :Min 0 db. Installation temperature:0~50. Operation temperature:-~60. Al-mylar Foil Braid (skin-foam-skin) Solid Bare opper 23AWG (Skin-Foam-Skin) aluminum foil, providing 0% coverage, foil face out Tinned copper braid ropagation Skew SNXT A-F SA-F Frequency (min) I NXT (min) (MH)z (db) (db/0m) (ns/0m) (ns/0m) (db) (db) (db/0m) (db/0m) NTN6A SFT-_ olor Item Outer Overalldiameter(mm) FA AT MODUS ATH ANS OTIA FIB ABINTS page 005 page 006

4 NITOT ODUT INFOMATION NITOT ODUT INFOMATION & ATH AB F/FT Shielded AT6A Twisted air Installation able I/ISO ANSI/TIA56.2 ISO/I 1101 Suitable for structured premises cabling. For transmission of digital and alogue voice and data sigls. specially suitable for all lass A applications. ISDN,thernet Base-T,Fast thernet 0 Base-T, Gigabit thernet 00Base-T,G Base-T.(I 02.3). Token ing/mbit/s,t-md/t/ddi 1Mbit/s, ATM 155Mbit/s.(I 02.5 ). Impedance: - 0MHz 0±15 (ohms). 0-0MHz 0±22 (ohms) MHz 0±32 (ohms). Max. D esistance :.7(ohms/0m). esistance unbalance (%):max 2.5. air-to-ground apacitance Unbalance 330 (pf/0m). Transfer Impendance:Max mohms/m@0mhz. Installation temperature:0~50. Operation temperature:-~60. Al-mylar Foil (skin-foam-skin) Solid Bare opper 23AWG (Skin-Foam-Skin) aluminum foil, providing 0% coverage, foil face out Tinned copper braid Tinned copper NTN6A FFT-_ olor ropagation Skew SNXT A-F SA-F Frequency (min) I NXT (min) (MH)z (db) (db/0m) (ns/0m) (ns/0m) (db) (db) (db/0m) (db/0m) Item Outer Overalldiameter(mm) U/FT Shielded AT6A Twisted air Installation able I/ISO ANSI/TIA56.2 ISO/I 1101 Suitable for structured premises cabling. For transmission of digital and alogue voice and data sigls. specially suitable for all lass A applications. ISDN,thernet Base-T,Fast thernet 0 Base-T, Gigabit thernet 00Base-T,G Base-T.(I 02.3). Token ing/mbit/s,t-md/t/ddi 1Mbit/s, ATM 155Mbit/s.(I 02.5 ). Impedance: - 0MHz 0±15 (ohms). 0-0MHz 0±22 (ohms) MHz 0±32 (ohms). Max. D esistance :.7(ohms/0m). esistance unbalance (%):max 2.5. air-to-ground apacitance Unbalance 330 (pf/0m). Transfer Impendance:Max mohms/m@0mhz. Installation temperature:0~50. Operation temperature:-~60. Al-mylar Foil (skin-foam-skin) Solid Bare opper 23AWG (Skin-Foam-Skin) aluminum foil, providing 0% coverage, foil face out 0.0±0.005mm T ropagation Skew SNXT A-F SA-F Frequency (min) I NXT (min) (MH)z (db) (db/0m) (ns/0m) (ns/0m) (db) (db) (db/0m) (db/0m) NTN6A UFT-_ olor Item Outer Overalldiameter(mm) FA AT MODUS ATH ANS OTIA FIB ABINTS page 007 page 00

5 NITOT ODUT INFOMATION NITOT ODUT INFOMATION & ATH AB F/UT Shielded AT6A Twisted air Installation able I/ISO ANSI/TIA56.2 ISO/I 1101 Suitable for structured premises cabling. For transmission of digital and alogue voice and data sigls. specially suitable for all lass A applications. ISDN,thernet Base-T,Fast thernet 0 Base-T, Gigabit thernet 00Base-T,G Base-T.(I 02.3). Token ing/mbit/s,t-md/t/ddi 1Mbit/s, ATM 155Mbit/s.(I 02.5 ). Impedance: - 0MHz 0±15 (ohms). 0-0MHz 0±22 (ohms) MHz 0±32 (ohms). Max. D esistance :.(ohms/0m). esistance unbalance (%):max 2.5. air-to-ground apacitance Unbalance 330 (pf/0m). Transfer Impendance:Max mohms/m@0mhz. Installation temperature:0~50. Operation temperature:-~60. T ross Filler Solid Bare opper 23AWG Aluminum foil, providing 0% Tinned copper NTN6A FT-_ olor DO Skew SNXT A-F SA-F Frequency (min) I NXT (min) (MH)z (db) (db/0m) (ns/0m) (ns/0m) (db) (db) (db/0m) (db/0m) Item Outer Overalldiameter(mm) U/UT unshielded AT6A Twisted airinstallation able Meets or exceeds requirements of ANSI/TIA ategory 6 and ISO nd dition lass A channel standards. Meets or exceeds requirements of ANSI/TIA and I ategory 6A component standards. Meets requirements of I 02.3af and I 02.3at for o applications. Third party tested to comply with ANSI/TIA/IA olor Availability: Additiol cable colors available. Impedance:1-0MHz 0±15(Ohms). ated Temperature: 75. D esistance Unbalance(%): Max 2.5. D esistance :.(Ohms/0m). air-to-gruond apacitance Unbalance: 330(pF/0M). esistance: >5000MΩ*Km. Dielectric strength: D 00V 2S. Frequency (MH)z (min) (db) I (db/0m) DO (ns/0m) Skew (ns/0m) NXT (min) (db) opper ross Filler SNXT (min) (db) A-F (min) (db/0m) Solid Bare opper 23AWG SA-F (min) (db/0m) NTN6A - _ olor Item Outer Overalldiameter(mm) SANXT SAA-F (min) (min) (db) (db/0m) ± ± ± ± ± FA AT MODUS ATH ANS OTIA FIB ABINTS page 009 page 0

6 NITOT ODUT INFOMATION NITOT ODUT INFOMATION & ATH AB F/UT shielded AT6 Twisted air Installation able xceeds ANSI/TIA and ISO nd dition lass ategory 6 channel standards. xceeds requirements of ANSI/TIA and I ategory 6 component standards. Meets I 02.3af and I 02.3at for o applications. Foil shield reduces ingress of MI interference to ensure cable performance at high frequency levels. olor Availability: Additiol cable colors available. Impedance:1-0MHz 0±15(Ohms). ated Temperature: 75. D esistance Unbalance(%): Max 2.5. D esistance :.(Ohms/0m). air-to-gruond apacitance Unbalance: 330(pF/0M). esistance: >5000MΩ*Km. Dielectric strength: D 00V 2S. T ross Filler Solid Bare opper 23AWG Aluminum foil, providing 0% Tinned copper NTN6 FT-_ olor DO Skew SNXT A-F SA-F Frequency (min) I NXT (min) (MH)z (db) (db/0m) (ns/0m) (ns/0m) (db) (db) (db/0m) (db/0m) Item Outer Overalldiameter(mm) U/UT unshielded AT6 Twisted airinstallation able Meets or exceeds requirements of ANSI/TIA ategory 6 and ISO nd dition lass channel standards. Meets or exceeds requirements of ANSI/TIA and I ategory 6 component standards. Meets requirements of I 02.3af and I 02.3at for o applications. Third party tested to comply with ANSI/TIA/IA olor Availability: Additiol cable colors available. Impedance:1-0MHz 0±15(Ohms). ated Temperature: 75. D esistance Unbalance(%): Max 2.5. D esistance :.(Ohms/0m). air-to-gruond apacitance Unbalance: 330(pF/0M). esistance: >5000MΩ*Km. Dielectric strength: D 00V 2S. ross Filler Solid Bare opper 23AWG DO Skew SNXT A-F SA-F Frequency (min) I NXT (min) (MH)z (db) (db/0m) (ns/0m) (ns/0m) (db) (db) (db/0m) (db/0m) NTN6 - _ olor Item Outer Overalldiameter(mm) 6.±0.2 6.±0.2 6.±0.2 6.±0.2 6.±0.2 FA AT MODUS ATH ANS OTIA FIB ABINTS page 011 page 012

7 NITOT ODUT INFOMATION NITOT ODUT INFOMATION & ATH AB F/UT shielded AT6 Twisted air Installation able xceeds ANSI/TIA and ISO nd dition lass ategory 6 channel standards. xceeds requirements of ANSI/TIA and I ategory 6 component standards. Meets I 02.3af and I 02.3at for o applications. Foil shield reduces ingress of MI interference to ensure cable performance at high frequency levels. olor Availability: Additiol cable colors available. Impedance:1-0MHz 0±15(Ohms). ated Temperature: 75. D esistance Unbalance(%): Max 2.5. D esistance :.(Ohms/0m). air-to-gruond apacitance Unbalance: 330(pF/0M). esistance: >5000MΩ*Km. Dielectric strength: D 00V 2S. T ross Filler Solid Bare opper 23AWG Aluminum foil, providing 0% Tinned copper NTN6 FT-_ olor DO Skew SNXT A-F SA-F Frequency (min) I NXT (min) (MH)z (db) (db/0m) (ns/0m) (ns/0m) (db) (db) (db/0m) (db/0m) Item Outer Overalldiameter(mm) SF/UT double fully shielded AT6 Twisted air Installation able xceeds ANSI/TIA and ISO nd dition lass ategory 6 channel standards. xceeds requirements of ANSI/TIA and I ategory 6 component standards. Meets I 02.3af and I 02.3at for o applications. Foil shield reduces ingress of MI interference to ensure cable performance at high frequency levels. olor Availability: Additiol cable colors available. Impedance:1-0MHz 0±15(Ohms). ated Temperature: 75. D esistance Unbalance(%): Max 2.5. D esistance :.(Ohms/0m). air-to-gruond apacitance Unbalance: 330(pF/0M). esistance: >5000MΩ*Km. Dielectric strength: D 00V 2S. Braid T opper ross Filler Solid Bare opper 23AWG Aluminum foil, providing 0% DO Skew SNXT A-F SA-F Frequency (min) I NXT (min) (MH)z (db) (db/0m) (ns/0m) (ns/0m) (db) (db) (db/0m) (db/0m) NTN6 ST-_ olor Item Outer Overalldiameter(mm).1±0.2.1±0.2.1±0.2.1±0.2.1±0.2 FA AT MODUS ATH ANS OTIA FIB ABINTS page 013 page 01

8 NITOT ODUT INFOMATION NITOT ODUT INFOMATION & ATH AB U/UT unshielded AT5e Twisted air Installation able Meets or exceeds requirements of ANSI/TIA ategory 5e and ISO nd dition lass D channel standards. Meets or exceeds requirements of ANSI/TIA and I ategory 5e component standards. Third party tested to ategory 5e channel compliance. Meets requirements of I 02.3af and I 02.3at for o applications. olor Availability: Additiol cable colors available. Impedance:1-0MHz 0±15(Ohms). ated Temperature: 75. D esistance Unbalance(%): Max 2.5. D esistance : 9.5(Ohms/0m). air-to-gruond apacitance Unbalance: 330(pF/0M). esistance: >5000MΩ*Km. Dielectric strength: D 00V 2S. opper air Solid Bare opper 2AWG DO Skew SNXT A-F SA-F Frequency (min) I NXT (min) (MH)z (db) (db/0m) (ns/0m) (ns/0m) (db) (db) (db/0m) (db/0m) NTN5 - _ olor Item Outer Overalldiameter(mm) 5.1± ± ± ± ±0.2 F/UT shielded AT5e Twisted air Installation able xceeds ANSI/TIA and ISO nd dition lass D ategory 5e channel standards. xceeds requirements of ANSI/TIA and I ategory 5e component standards. Meets requirements of I 02.3af and I 02.3at for o applications. Foil shield reduces ingress of MI interference to ensure cable performance at high frequency levels. olor Availability: Additiol cable colors available. Impedance:1-0MHz 0±15(Ohms). ated Temperature: 75. D esistance Unbalance(%): Max 2.5. D esistance : 9.5(Ohms/0m). air-to-gruond apacitance Unbalance: 330(pF/0M). esistance: >5000MΩ*Km. Dielectric strength: D 00V 2S. T opper Solid Bare opper 2AWG Aluminum foil, providing 0% DO Skew SNXT A-F SA-F Frequency (min) I NXT (min) (MH)z (db) (db/0m) (ns/0m) (ns/0m) (db) (db) (db/0m) (db/0m) NTN5 FT-_ olor Item Outer Overalldiameter(mm) 6.3± ± ± ± ±0.2 FA AT MODUS ATH ANS OTIA FIB ABINTS page 015 page 0

9 NITOT ODUT INFOMATION NITOT ODUT INFOMATION & ATH AB SF/UT double fully shielded AT5e Twisted air Installation able xceeds ANSI/TIA and ISO nd dition lass D ategory 5e channel standards. xceeds requirements of ANSI/TIA and I ategory 5e component standards. Meets requirements of I 02.3af and I 02.3at for o applications. Foil shield reduces ingress of MI interference to ensure cable performance at high frequency levels. olor Availability: Additiol cable colors available. Impedance:1-0MHz 0±15(Ohms). ated Temperature: 75. D esistance Unbalance(%): Max 2.5. D esistance : 9.5(Ohms/0m). air-to-gruond apacitance Unbalance: 330(pF/0M). esistance: >5000MΩ*Km. Dielectric strength: D 00V 2S. Braid T opper air Solid Bare opper 2AWG Aluminum foil, providing 0% DO Skew SNXT A-F SA-F Frequency (min) I NXT (min) (MH)z (db) (db/0m) (ns/0m) (ns/0m) (db) (db) (db/0m) (db/0m) NTN5 ST-_ olor Item Outer Overalldiameter(mm) 6.5± ± ± ± ±0.2 U/UT unshielded AT6 Twisted air Installation able Meets or exceeds requirements of ANSI/TIA ategory 6 and ISO nd dition lass channel standards. Meets or exceeds requirements of ANSI/TIA and I ategory 6 component standards. Meets requirements of I 02.3af and I 02.3at for o applications. Third party tested to comply with ANSI/TIA/IA olor Availability: Additiol cable colors available. Impedance:1-0MHz 0±15(Ohms). ated Temperature: 75. D esistance Unbalance(%): Max 2.5. D esistance :.(Ohms/0m). air-to-gruond apacitance Unbalance: 330(pF/0M). esistance: >5000MΩ*Km. Dielectric strength: D 00V 2S. ross Filler Solid Bare opper 23AWG 2x, twisted in 2x pairs DO Skew SNXT A-F SA-F Frequency (min) I NXT (min) (MH)z (db) (db/0m) (ns/0m) (ns/0m) (db) (db) (db/0m) (db/0m) NTN6 2 -_ olor Item Outer Overalldiameter(mm) ( )+/-0.2 ( )+/-0.2 ( )+/-0.2 ( )+/-0.2 ( )+/-0.2 FA AT MODUS ATH ANS OTIA FIB ABINTS page 017 page 01

10 NITOT ODUT INFOMATION NITOT ODUT INFOMATION & ATH AB U/UT unshielded AT5e Twisted air Installation able Meets or exceeds requirements of ANSI/TIA ategory 5e and ISO nd dition lass D channel standards. Meets or exceeds requirements of ANSI/TIA and I ategory 5e component standards. Third party tested to ategory 5e channel compliance. Meets requirements of I 02.3af and I 02.3at for o applications. olor Availability: Additiol cable colors available. atent products:n Impedance:1-0MHz 0±15(Ohms). ated Temperature: 75. D esistance Unbalance(%): Max 2.5. D esistance : 9.5(Ohms/0m). air-to-gruond apacitance Unbalance: 330(pF/0M). esistance: >5000MΩ*Km. Dielectric strength: D 00V 2S. opper air Solid Bare opper 2AWG 2x, twisted in 2x pairs DO Skew SNXT A-F SA-F Frequency (min) I NXT (min) (MH)z (db) (db/0m) (ns/0m) (ns/0m) (db) (db) (db/0m) (db/0m) NTN5 2 -_ olor Item Outer Overalldiameter(mm) ( )+/-0.3 ( )+/-0.3 ( )+/-0.3 ( )+/-0.3 ( )+/-0.3 U/UT steel wire support unshielded AT5e Twisted air Installation able Meets or exceeds requirements of ANSI/TIA ategory 5e and ISO nd dition lass D channel standards.. Meets or exceeds requirements of ANSI/TIA and I ategory 5e component standards.. Third party tested to ategory 5e channel compliance.. Meets requirements of I 02.3af and I 02.3at for o applications... olor Availability: Additiol cable colors available.. Impedance:1-0MHz 0±15(Ohms). ated Temperature: 75. D esistance Unbalance(%): Max 2.5. D esistance : 9.5(Ohms/0m). air-to-gruond apacitance Unbalance: 330(pF/0M). esistance: >5000MΩ*Km. Dielectric strength: D 00V 2S. opper air Solid Bare opper 2AWG DO Skew SNXT A-F SA-F Frequency (min) I NXT (min) (MH)z (db) (db/0m) (ns/0m) (ns/0m) (db) (db) (db/0m) (db/0m) Order information(artnumber) Item Outer Overalldiameter(mm) NTN5STW- ( )±0.3 FA AT MODUS ATH ANS OTIA FIB ABINTS page 019 page 0

11 NITOT ODUT INFOMATION NITOT ODUT INFOMATION & ATH AB F/UT steel wire support shielded AT5e Twisted air Installation able xceeds ANSI/TIA and ISO nd dition lass D ategory 5e channel standards. xceeds requirements of ANSI/TIA and I ategory 5e component standards. Meets requirements of I 02.3af and I 02.3at for o applications. Foil shield reduces ingress of MI interference to ensure cable performance at high frequency levels. olor Availability: Additiol cable colors available. Impedance:1-0MHz 0±15(Ohms). ated Temperature: 75. D esistance Unbalance(%): Max 2.5. D esistance : 9.5(Ohms/0m). air-to-gruond apacitance Unbalance: 330(pF/0M). esistance: >5000MΩ*Km. Dielectric strength: D 00V 2S. T opper Order information Solid Bare opper 2AWG Aluminum foil, providing 0% DO Skew SNXT A-F SA-F Frequency (min) I NXT (min) (MH)z (db) (db/0m) (ns/0m) (ns/0m) (db) (db) (db/0m) (db/0m) Item NTN5FTSW- NTN5FTSW- NTN5FTSW- NTN5FTSW- NTN5FTSW- Outer Overalldiameter(mm) ( )±0.3 ( )±0.3 ( )±0.3 ( )±0.3 ( )±0.3 U/UT unshielded AT5e Twisted air Installation able Meets or exceeds requirements of ANSI/TIA ategory 5e and ISO nd dition lass D channel standards. Meets or exceeds requirements of ANSI/TIA and I ategory 5e component standards. Third party tested to ategory 5e channel compliance. Meets requirements of I 02.3af and I 02.3at for o applications. olor Availability: Additiol cable colors available. atent products:n Impedance:1-0MHz 0±15(Ohms). ated Temperature: 75. D esistance Unbalance(%): Max 2.5. D esistance : 9.5(Ohms/0m). air-to-gruond apacitance Unbalance: 330(pF/0M). esistance: >5000MΩ*Km. Dielectric strength: D 00V 2S. opper Filler Solid Bare opper 2AWG, twisted in pairs White/Blue,White/Orange,White/Green, White/Brown,White/Grey ed/blue,ed/orange,ed/green DO Skew SNXT A-F SA-F Frequency (min) I NXT (min) (MH)z (db) (db/0m) (ns/0m) (ns/0m) (db) (db) (db/0m) (db/0m) NTN5 -_ olor Item Outer Overalldiameter(mm).1±0.2.1±0.2.1±0.2.1±0.2.1±0.2 FA AT MODUS ATH ANS OTIA FIB ABINTS page 021 page 022

12 NITOT ODUT INFOMATION NITOT ODUT INFOMATION & ATH AB page 023 U/UT unshielded AT3 Twisted /50/0 air Installation able xceeds requirements of ANSI/TIA ategory 3 and ISO 1101 lass channel standards. xceeds the requirements of ANSI/TIA ategory 3 component standards. Descending cable length markings eble easy identification olor Availability: Additiol cable colors available. atent products:n Mechanicalharacteristics able under the minimum tension 00N. elongation: 15%. before Aging Tensile Strength 13.5Mpa longation 150%. After Aging Tensile Strength 12.5Mpa longation 1%. Impedance:1-MHz 0±15(Ohms). ated Temperature: 75. D esistance Unbalance(%): Max 2.5. D esistance : 111(Ohms). air-to-gruond apacitance Unbalance: 330(pF/0M). esistance: >5000MΩ*Km. Dielectric strength: D 00V 2S. U/UT unshielded AT5 Twisted /50/0 air Installation able xceeds requirements and ISO 1101 lass D channel standards. xceeds the requirements and I ategory 5 component standards. Descending cable length markings eble easy identification ackaged 305m (1,000 ft.) on a reel. olor Availability: Additiol cable colors available. atent products:n Mechanicalharacteristics able under the minimum tension 00N. elongation: 15%. before Aging Tensile Strength 13.5Mpa longation 150%. After Aging Tensile Strength 12.5Mpa longation 1%. NTN3 _ - _ olor airs 50 airs 0 airs Item Outer Overalldiameter(mm) Impedance:1-0MHz 0±15(Ohms). ated Temperature: 75. D esistance Unbalance(%): Max 2.5. D esistance : 111(Ohms). air-to-gruond apacitance Unbalance: 330(pF/0M). esistance: >5000MΩ*Km. Dielectric strength: D 00V 2S. NTN5 _ - _ olor airs 50 airs 0 airs Item Outer Overalldiameter(mm) U/UT unshielded AT5e Twisted air opper Installation able Impedance:1-0MHz 0±15(Ohms). ated Temperature: 75. D esistance Unbalance(%): Max 2.5. D esistance : 111(Ohms). air-to-gruond apacitance Unbalance: 330(pF/0M). esistance: >5000MΩ*Km. Dielectric strength: D 00V 2S. Mechanicalharacteristics able under the minimum tension 00N. elongation: 15%. before Aging Tensile Strength 13.5Mpa longation 150%. After Aging Tensile Strength 12.5Mpa longation 1%. U/UT unshielded AT3 Twisted 2 air Installation able Impedance:1-MHz 0±15(Ohms). ated Temperature: 75. D esistance Unbalance(%): Max 2.5. D esistance : 111(Ohms). air-to-gruond apacitance Unbalance: 330(pF/0M). esistance: >5000MΩ*Km. Dielectric strength: D 00V 2S. Mechanicalharacteristics able under the minimum tension 00N. elongation: 15%. before Aging Tensile Strength 13.5Mpa longation 150%. After Aging Tensile Strength 12.5Mpa longation 1%. Filler T Meets or exceeds requirements of ANSI/TIA ategory 5e and ISO nd dition lass D channel standards. Meets or exceeds requirements of ANSI/TIA and I ategory 5e component standards. Third party tested to ategory 5e channel compliance. Meets requirements of I 02.3af and I 02.3at for o applications. olor Availability: Additiol cable colors available. atent products:n NTN5 -_ olor opper air Solid Bare opper 2AWG, twisted in 2 pairs Order information(artnumber) Item NTN3 2- olor Item Outer Overalldiameter(mm) Outer Overalldiameter(mm).3±0.2 page 02 FA AT MODUS ATH ANS OTIA FIB ABINTS

13 NITOT ODUT INFOMATION NITOT ODUT INFOMATION ATH O ATH O & ATH AB S/FT double fully shielded twisted pairs category 6A patch cord Al-mylar Foil Braid (skin-foam-skin) lectrical performance guaranteed to meet or exceed ANSI/TIA-56B ategory 6A and ISO/I specifications. Independently tested and verified intertek (T). Ideal for Data center architectural requirements. Stranded cable for maximum flexibility. Available with different plug mold. Available with different color of cable. Available with different length. Standed bare copper 26AWG (Foam-Skin) aluminum foil, providing 0% coverage, foil face out Tinned copper braid es. ength rop. Skew Ω Max. ns ns Freq. Insertion oss NXT A-N A-F S NXT S A-N S A-F i 0m NT6A SFT Available ength olor Special orders available upon request O U/UT unshielded twisted pairs category 6A patch cord ross Filler lectrical performance guaranteed to meet or exceed ANSI/TIA-56B ategory 6 and ISO/I specifications. Independently tested and verified intertek (T). Ideal for Data center architectural requirements. Stranded cable for maximum flexibility. Available with different plug mold. Available with different color of cable. Available with different length. es. ength rop. Skew Ω Max. ns ns Stranded Bare opper 2AWG Freq. Insertion oss NXT A-N A-F S NXT S A-N S A-F i 0m NT6A SFT Available ength olor Special orders available upon request O FA AT MODUS ATH ANS OTIA FIB ABINTS page 0 page 026

14 NITOT ODUT INFOMATION NITOT ODUT INFOMATION ATH O ATH O & ATH AB U/UT unshielded twisted pairs category 6 patch cord ross Filler lectrical performance guaranteed to meet or exceed ANSI/TIA-56B ategory 6 and ISO/I specifications. Independently tested and verified intertek (T). Ideal for Data center architectural requirements. Stranded cable for maximum flexibility. Available with different plug mold. Available with different color of cable. Available with different length. es. ength rop. Skew Ω Max. ns ns Stranded Bare opper 2AWG Freq. Insertion oss NXT A-N A-F S NXT S A-N S A-F i 0m NT6A SFT Available ength olor Special orders available upon request O F/FT shielded twisted pairs category 6 patch cord T ross Filler lectrical performance guaranteed to meet or exceed ANSI/TIA-56B ategory 6 and ISO/I specifications. Independently tested and verified intertek (T). Ideal for Data center architectural requirements. Stranded cable for maximum flexibility. Available with different plug mold. Available with different color of cable. Available with different length. stranded bare copper 26AWG Aluminum foil, providing 0% Tinned copper es. ength rop. Skew Ω Max. ns ns Freq. Insertion oss NXT A-N A-F S NXT S A-N S A-F i 0m NT6A SFT Available ength olor Special orders available upon request O FA AT MODUS ATH ANS OTIA FIB ABINTS page 027 page 02

15 NITOT ODUT INFOMATION NITOT ODUT INFOMATION ATH O ATH O & ATH AB U/UT unshielded twisted pairs category 5e patch cord opper air lectrical performance guaranteed to meet or exceed ANSI/TIA-56B ategory 5e and ISO/I specifications. Independently tested and verified intertek (T). Ideal for Data center architectural requirements. Stranded cable for maximum flexibility. Available with different plug mold. Available with different color of cable. Available with different length. stranded bare copper 2AWG es. ength rop. Skew Ω Max. ns ns Freq. Insertion oss NXT A-N A-F S NXT i 0m NT6A SFT Available ength olor S A-N Special orders available upon request. S A-F O F/UT shielded twisted pairs category 5e patch cord T opper lectrical performance guaranteed to meet or exceed ANSI/TIA-56B ategory 5e and ISO/I specifications. Independently tested and verified intertek (T). Ideal for Data center architectural requirements. Stranded cable for maximum flexibility. Available with different plug mold. Available with different color of cable. Available with different length. stranded bare copper 26AWG Aluminum foil, providing 0% es. ength rop. Skew Ω Max. ns ns Freq. Insertion oss NXT A-N A-F S NXT i 0m NT6A SFT Available ength olor Special orders available upon request S A-N S A-F O FA AT MODUS ATH ANS OTIA FIB ABINTS page 029 page 030

16 NITOT ODUT INFOMATION NITOT ODUT INFOMATION ATH O ATH O & ATH AB SF/UT double fully shielded twisted pairs category 5e patch cord Braid T opper air lectrical performance guaranteed to meet or exceed ANSI/TIA-56B ategory 5e and ISO/I specifications. Independently tested and verified intertek (T). Ideal for Data center architectural requirements. Stranded cable for maximum flexibility. Available with different plug mold. Available with different color of cable. Available with different length. stranded bard copper 26AWG Aluminum foil, providing 0% es. ength rop. Skew Ω Max. ns ns Freq. Insertion oss NXT A-N A-F S NXT i 0m NT6A SFT Available ength olor S A-N Special orders available upon request. S A-F O U/UT unshielded twisted pairs category 6 flat patch cord opper air lectrical performance guaranteed to meet or exceed ANSI/TIA-56B ategory 6 and ISO/I specifications. Independently tested and verified intertek (T). Ideal for Data center architectural requirements. Stranded cable for maximum flexibility. Available with different plug mold. Available with different color of cable. Available with different length. es. ength rop. Skew Ω Max. ns ns Freq. Insertion oss NXT A-N A-F S NXT stranded bard copper 32AWG S A-N S A-F i m NTF6 Available ength olor Special orders available upon request O FA AT MODUS ATH ANS OTIA FIB ABINTS page 031 page 032