CONSTRUCTION MATERIALS DIVISION 15 Construction Materials - Water Mains Section _Jan12_2016.pdf Page 1 of 18 INDEX
|
|
|
- Charles Dominic Manning
- 7 years ago
- Views:
Transcription
1 15001_Jan12_2016.pdf Page 1 of 18 INDEX Page WATER MAIN PRESSURE PIPE Polyvinyl Chloride (PVC) Water Pipe (150mm 300mm) Polyvinyl Chloride (PVC) Large Diameter Water Pipe (350mm mm) Restrained Joint Polyvinyl Chloride (PVC) Water Pipe and Fittings (150mm 300mm) WATER MAIN PRESSURE PIPE FITTINGS Injection Moulded PVC Pipe Fittings (150mm 1200mm) Fabricated PVC Pressure Pipe Fittings Grey Cast Iron Fittings WATER MAIN PIPE RESTRAINTS Pipe Restrainers WATER MAIN VALVES Gate Valves Double Disc Valves Resilient-seated Valves Butterfly Valves WATER MAIN VALVE BOXES Valve Boxes Lifter Rings WATER MAIN HYDRANTS Hydrants 14 *Bold Text Denotes a Change in This Version (Jan 12, 2016)
2 15001_Jan12_2016.pdf Page 2 of WATER MAIN PIPE COUPLINGS Pipe Couplings WATER MAIN REPAIR CLAMPS Repair Clamps WATER MAIN TAPPING SLEEVES Tapping Sleeves WATER MAIN TAPPING VALVES Tapping Valves 18
3 15001_Jan12_2016.pdf Page 3 of WATER MAIN PRESSURE PIPE 1.1 Polyvinyl Chloride (PVC) Water Pipe (150mm 300mm) Polyvinyl Chloride DR18 pressure pipe and fittings Bell and Spigot type with factory installed rubber gasket AWWA C900, CSA137.3 Water Main construction Ipex Inc. - Blue Brute Royal Group - Royal Seal Rehau Aqualoc (Not in business as of 2008) Northern Pipe Products Inc. Northern Pipe
4 15001_Jan12_2016.pdf Page 4 of WATER MAIN PRESSURE PIPE 1.2 Polyvinyl Chloride (PVC) Large Diameter Water Pipe (350mm mm) Project specific AWWA C905, CSA137.3 Only as approved by City of Saskatoon Engineer on a project to project basis Water Main construction N/A Ipex Inc. Centurion Royal Seal CIOD PVC Pipe
5 15001_Jan12_2016.pdf Page 5 of WATER MAIN PRESSURE PIPE 1.3 Restrained Joint Polyvinyl Chloride (PVC) Water Pipe and Fittings (150mm 300mm) Polyvinyl Chloride pressure pipe and fittings with Steel ring-and-pin gasketed joints Bell and Spigot type with factory installed rubber gasket AWWA C900 As approved by City of Saskatoon Engineer on a project to project basis Water Main construction involving Horizontal Directional Drilling and other trenchless applications N/A Ipex Inc. - TerraBrute
6 15001_Jan12_2016.pdf Page 6 of WATER MAIN PRESSURE PIPE FITTINGS 2.1 Injection Moulded PVC Pipe Fittings (150mm 1200mm) Polyvinyl Chloride injection molded fittings, DR18, with rubber gasket joints AWWA C907 Water Main construction Ipex Inc. - Blue Brute Royal Group - Royal Seal Rehau - Aqualoc Harco Fittings Harco Class 150 Northern Pipe Products Inc. Northern Pipe
7 15001_Jan12_2016.pdf Page 7 of WATER MAIN PRESSURE PIPE FITTINGS 2.2 Fabricated PVC Pressure Pipe Fittings Polyvinyl Chloride fabricated fittings, DR18, with rubber gasket joints AWWA C900 or C905 and CSA B137.3 Water Main construction Fittings larger than 300mm, as approved by engineer on a project to project basis Installed with a zinc anode conforming to City of Saskatoon specifications Ipex Inc. Centurion, Blue Brute Royal Seal CIOD Fittings Galaxy Plastics C.I.O.D. PVC C900 *Bold Text Denotes a Change in This Version (Jan 12, 2016)
8 15001_Jan12_2016.pdf Page 8 of WATER MAIN PRESSURE PIPE FITTINGS 2.3 Grey Cast Iron Fittings Cast Iron fittings, cast from grey cast iron with rubber gasket joints AWWA C110 Water Main construction Installed with a zinc anode conforming to City of Saskatoon specifications Sigma Corporation - Tyton Joint Norwood Foundry Limited
9 15001_Jan12_2016.pdf Page 9 of WATER MAIN PIPE RESTRAINTS 3.1 Pipe Restrainers Pipe restraints, consist of ductile iron split restraint rings and high strength low allow (HSLA) connecting rods and fasteners ASTM A536, ASTM F1674 and AWWA C111 As approved by City of Saskatoon Engineer on a project to project basis Shall be galvanized or rust proofed by methods approved by the Engineer To restrain pipe and fitting joints , Drawing Ford Meter Box Company - Uni-flange 900-C, series 1300-C Sigma Corporation - Restraint Systems for Ductile Iron Pipe EBAA Iron, Inc. Push On Pipe Joints
10 15001_Jan12_2016.pdf Page 10 of WATER MAIN VALVES 4.1 Gate Valves Gate valve, grey cast iron body with non rising stem and O -ring stem seal Designed for a working pressure of 1035kPa Water main construction, Horizontal mains. Installed with a zinc anode conforming to City of Saskatoon specifications Double Disc Valves AWWA C500 Mueller Canada Double Disk Gate Valve Clow Canada Jenkins Canada (obsolete soon) Resilient-seated Valves AWWA C509, ASTM A126 Mueller Canada - Series 2360 ( mm) slip on type Clow Canada Series F-6000 ( mm) Tyton fitting type Jenkins Canada (obsolete soon)
11 15001_Jan12_2016.pdf Page 11 of WATER MAIN VALVES 4.2 Butterfly Valves Butterfly Valve, grey cast iron body with stainless steel shaft with O-ring stem seals Rubber and stainless steel or stainless steel seated AWWA C504 class 150B Valves Water main construction, 300mm horizontal mains. Installed with a zinc anode conforming to City of Saskatoon specifications Mueller Canada Lineseal III Clow Canada 4500 class 150 Jenkins (obsolete soon)
12 15001_Jan12_2016.pdf Page 12 of WATER MAIN VALVE BOXES 5.1 Valve Boxes Valve Boxes sliding type extending from 2440 mm to 3280 mm Cast iron cap and boot with the middle section either cast iron or steel AWWA C213 Water main construction Installed with a zinc anode conforming to City of Saskatoon specifications , Drawing Titan Foundry Ltd. *Bold Text Denotes a Change in This Version (Jan 12, 2016)
13 15001_Jan12_2016.pdf Page 13 of WATER MAIN VALVE BOXES 5.2 Lifter Rings Lifter Rings for Valve Box adjustment Cast iron ASTM A48 Class 20 Water main rehabilitation and roadway rehabilitation Drawing Titan Foundry Ltd. *This entire Page is new in This Version (Jan 12, 2016)
14 15001_Jan12_2016.pdf Page 14 of WATER MAIN HYDRANTS 6.1 Hydrants Hydrants, dry barrel with compression type main valve 2-65mm nozzles and 114mm pumper nozzle and 150mm inlet elbow (boot) supplied with rubber gasket. AWWA C502 Water main construction Installed with a zinc anode conforming to City of Saskatoon specifications , , Drawing Mueller Canada Super Centurion Mueller Canada Modern Centurion Mueller Canada Canada Valve Clow Canada McAvity M67 Clow Canada (Concorde, Daigle) D67M
15 15001_Jan12_2016.pdf Page 15 of WATER MAIN PIPE COUPLINGS 7.1 Pipe Couplings Bolted, Sleeve-type Couplings Consisting of a center sleeve and two end rings manufactured from either Ductile Iron, Carbon Steel, or Cast Iron, two rubber wedge gaskets, a SBR (buma S) rubber gasket and high strength, low alloy (HSLA) steel nuts and bolts. AWWA 219, AWWA C111 Ductile Iron: ASTM 536 Carbon Steel: ASTM A512 and A53 Cast Iron: ASTM A97 Grade or Water main construction, non-restraining connections between two plain ended pipes Use of reducing couplings, as approved by engineer on a project to project basis Each bolt to be supplied with zinc anode cap , For required length and number of bolts Robar 1507, 1507R Epoxy coated, HSLA fasteners with anodes Romac XR501 Extended range coupling
16 15001_Jan12_2016.pdf Page 16 of WATER MAIN REPAIR CLAMPS 8.1 Repair Clamps Stainless Steel Repair Couplings with full wrap around SBR (Buna S) rubber gasket AWWA C111 Gasket To repair service connection cut offs Not to be used to repair structural damage or defects of the pipe , Robar Industries Ltd (COS Spec) Romac Industries Inc. SS series
17 15001_Jan12_2016.pdf Page 17 of WATER MAIN TAPPING SLEEVES 9.1 Tapping Sleeves Tapping Sleeve, Cast iron bolted split sleeve type with flange outlet AWWA C111, NSF 61 Tapping water main services greater than 50mm , Mueller Canada - H-615 Robar Industries Ltd Model Smith Blair 623 Mechanical Joint
18 15001_Jan12_2016.pdf Page 18 of WATER MAIN TAPPING VALVES 10.1 Tapping Valves Tapping valve, iron body, bronze mounted, nonrising stem gate valve AWWA C500 Tapping water main services greater than 50mm Mueller Canada T2300 Series Clow Canada 6000 Series
08003-1 WATER SERVICE 2
08003_Mar08_2011.pdf Page 1 of 7 INDEX Page 08003-1 WATER SERVICE 2 1.1 Pipe 2 1.1.1 Copper 2 1.1.2 Polyethylene 2 1.2 Valves and Fittings 2 1.2.1 Main Stops 3 1.2.2 Curb Stops 3 1.2.3 Curb Box 3 1.2.4
Chapter 6 Material Specifications
Chapter 6 Material Specifications Chapter 6 Material Specifications Materials incorporated in the finished work and used during construction shall be according to the standards and specifications specified
PART C MATERIAL SPECIFICATIONS
REGION OF WATERLOO AND AREA MUNICIPALITIES DESIGN GUIDELINES AND SUPPLEMENTAL SPECIFICATIONS FOR MUNICIPAL SERVICES PART C TABLE OF CONTENTS C.1 GENERAL... 1 C.1.1 Ontario Provincial Standards... 1 C.1.2
American- Darling 5¼" B-84-B-5.
-5 Sealed Lubrication Chamber Seals operating threads from water and debris which greatly reduces routine maintenance. Top Travel Stop Nut Helps prevent stem buckling and damage to bronze components which
SECTION 33 11 00.15 DUCTILE IRON PIPE AND FITTINGS
SECTION 33 11 00.15 DUCTILE IRON PIPE AND FITTINGS PART 1: GENERAL 1.01 COORDINATION OF WORK Connection to existing pipelines may require shutdown of AW facilities. Closely coordinate construction work
Quality & Innovation, Manufactured in the U.S.A.
Quality & Innovation, Manufactured in the U.S.A. Repair Clamps Couplings Expansion Joints Pipe Restraint Service Saddles Dismantling Joints Tapping Sleeves Tapping Machines HDPE Pipe Products Line-Stop
DRESSER TM PIPELINE SOLUTIONS
Wal-Rich Corporation is a master distributor of Dresser Pipeline Solutions, a trademark of GE. The following pages highlight the items that are in stock at our NY facility. For more information, please
INDEX. Sec. No. Items Page Nos.
INDEX Sec. No. Items Page Nos. 1. Types of Pipe............... MSSP- 2 2. Concrete Pipe............... MSSP- 2 thru MSSP-3 3. ABS and PVC Truss Pipe............... MSSP- 3 4. ABS and PVC Solid Wall Pipe...............
BUTTERFLY VALVES. An industry leader in underground and in-plant applications. STYLE 4500 3 24 STYLE 1450 30 54. Consult factory for sizes 60 120
An industry leader in underground and in-plant applications. BUTTERFLY VALVES STYLE 4500 3 24 STYLE 1450 30 54 Consult factory for sizes 60 120 C504 Class 150B & 250B M&H Valve is a division of McWane,
BUTTERFLY VALVES. An industry leader in underground and in-plant applications. STYLE 4500 3 24 STYLE 1450 30 54. Consult factory for sizes 60 120
An industry leader in underground and in-plant applications. BUTTERFLY VALVES STYLE 4500 3 24 STYLE 1450 30 54 Consult factory for sizes 60 120 C504 Class 150B & 250B M&H Valve is a division of McWane,
SECTION 33 11 00.11 POLYVINYL CHLORIDE (PVC) PIPE
SECTION 33 11 00.11 POLYVINYL CHLORIDE (PVC) PIPE PART 1: GENERAL 1.01 SECTION INCLUDES PVC pressure pipe and fabricated fittings in nominal sizes 4-inches through 12-inches with cast iron pipe equivalent
SECTION 33 12 19 FIRE HYDRANTS
SECTION 33 12 19 FIRE HYDRANTS PART 1: GENERAL 1.01 SCOPE A. Fire hydrants. B. Adjustment of fire hydrants and gate valves. 1.02 SUBMITTALS A. Conform to requirements of Section 01 33 00 - Submittals.
SECTION 02110 - ASBESTOS CEMENT PIPE REPAIRS, DEMOLITION, AND DISPOSAL
SECTION 02110 - ASBESTOS CEMENT PIPE REPAIRS, DEMOLITION, AND DISPOSAL PART 1 - GENERAL 1.1 WORK INCLUDED IN THIS SECTION A. The WORK of this Section includes the repair, demolition, and disposal of asbestos
REQUEST FOR QUOTE STANDING OFFER NO. 2016-131 SUPPLY AND DELIVERY OF WATERWORKS FITTINGS
REQUEST FOR QUOTE STANDING OFFER NO. 2016-131 SUPPLY AND DELIVERY OF WATERWORKS FITTINGS Capital Regional District Integrated Water Services 479 Island Highway Victoria, BC V9B 1H7 Tel: 250.474.9600 Fax:
SECTION 15105 DUCTILE IRON PIPE AND FITTINGS
SECTION 15105 DUCTILE IRON PIPE AND FITTINGS PART 1 GENERAL.01 COORDINATION OF WORK Connection to existing pipelines may require shutdown of Owner facilities. Closely coordinate construction work and connections
4. Combi valves. 7. Fire hydrants. 8. Check valves. 9. Air valves
1. General company and product information 2. Flanged gate valves for water 3. Other gate valves for water 4. Combi valves 5. Service connection valves for water 6. Valves and fittings for gas 7. Fire
Ductile Iron Pipe Couplings
J-9 Pipe 1 2 Straight and Transition Ductile offer an easy and economical way of joining whether the is of the same nominal and/or type or different at each coupling. couplings will handle most of your
WATER MAIN CONSTRUCTION TECHNIQUES DEPARTMENT OF PUBLIC WORKS WATER & WASTEWATER DIVISION
WATER MAIN CONSTRUCTION TECHNIQUES Overview Water Main - Materials Specifications Installation Future? Water Main Materials Material Types There are various material types used for water mains, these include:
WATER & SEWER CORROSIVE RESISTANT PRODUCTS
WATER & SEWER CORROSIVE RESISTANT PRODUCTS The Standard of Excellence in the Industry CASING SPACERS COUPLINGS & FLANGE COUPLING ADAPTERS REPAIR CLAMPS DUCTILE IRON SADDLES STAINLESS STEEL SADDLES TAPPING
SECTION 02630 STORM DRAINAGE SYSTEM
SECTION 02630 PART 1 - GENERAL 1.01 DESCRIPTION A. Section includes specifications for storm drainage systems including modifications and connections to existing storm drainage systems. 1.02 REFERENCE
PLUMBING VALVES HOUSTON ORLANDO GREENVILLE 800/392-5066 800/327-3022 800/476-2212 TOTAL MAINTENANCE SOLUTIONS
8-1 BRONZE GATE VALVES 125 psi. SWP 200 psi WOG Threaded ends Non-rising stem Solid wedge disc DOMESTIC IMPORT PART # 40300250 1/4 40300260 40300251 3/8 40300261 40300252 1/2 40300262 40300206 3/4 40300263
STANDARD SPECIFICATION SECTION 15292 POLYVINYL CHLORIDE (PVC) PRESSURE PIPE (AWWA C900)
STANDARD SPECIFICATION SECTION 15292 POLYVINYL CHLORIDE (PVC) PRESSURE PIPE (AWWA C900) PART 1 - GENERAL 1.01 DESCRIPTION This section includes materials, installation, and testing of PVC pressure pipe
Special Specification 7021 Water Main and Sewer Line Replacements
Special Specification 7021 Water Main and Sewer Line Replacements 1. DESCRIPTION Furnish, install, or replace water pipe, water valves, water meters and boxes, water service connections, fire hydrant assemblies,
CRANE. Σελίδα 1 από 2. Dimensions and Weights. Weight (kg) Size
CRANE Σελίδα από 2 DM93 Variable Orifice Double Regulating Valve PN6 Cast Iron Balancing Valve (VODRV), Flanged to BSEN 92-2 The DM93 variable orifice double regulating valves will give satisfactory performance
Water Distribution Products Full-line product offering
Water Distribution Products Full-line product offering Contents 03 Hydrants and Hydrant Security 04 Main Valves 05 Pipe Repair Products 06-07 Service Brass 08 Machines and Tools 09-10 Intelligent Water
SECTION 02401 - SANITARY SEWER PIPE
PART 1 - GENERAL 1.1 DESCRIPTION A. The WORK under this Section includes providing all labor, materials, tools and equipment necessary for furnishing and installing sanitary sewer pipe, in accordance with
INDICATOR POST STYLE 2945 A TELESCOPING BARREL ASSEMBLY UL AND FM APPROVED
INDICATOR POST STYLE 2945 A TELESCOPING BARREL ASSEMBLY UL AND FM APPROVED Available in Sizes B C D E See Page 6 for Dimensions Kennedy Valve/Indicator Posts 17-1 INDICATOR POST STYLE 2945 A TELESCOPING
Section 3510: Reclaimed water Pipes, Valves, and Appurtenances February 11, 2011
STANDARDS AND CONSTRUCTION MANUAL : Reclaimed water Pipes, Valves, and Appurtenances February 11, 2011 PART 1 - GENERAL 1.01 SCOPE OF WORK A. These specifications cover the pipes, fittings, and appurtenances
Ford Pipe Repair Products The Ford Meter Box Company, Inc.
Section L 7/2008 Ford Pipe Repair Products The Ford Meter Box Company, Inc. 775 Manchester Avenue, P.O. Box 443, Wabash, Indiana, USA 46992-0443 Telephone: 260-563-3171 FAX: 800-826-3487 Overseas FAX:
British Standard Underground Hydrant Range
British Standard Underground Hydrant Range 2 THE NEW AVK BRITISH STANDARD HYDRANT RANGE AVK are the renowned market leading innovators, manufacturers and suppliers of BS 750 fire hydrants into the UK,
Pipe Repair Products A complete selection for all types of pipe
Pipe Repair Products A complete selection for all types of pipe Mueller Service Saddles Manufactured and tested in accordance with ANSI/AWWA C800 & NSF 61 certified. Mueller service saddles, available
Section C-1 Pipes and Fittings
Section C-1 Pipes and Fittings C1.00 Work Included The work under this Division of the Specifications shall include all labor, materials, and equipment necessary to furnish and install all piping, pipelines,
PRESSURE REDUCING CONTROL VALVE
Schematics Throttles to reduce high upstream pressure to constant lower downstream pressure Low Flow By-Pass controls at low flows 4 PRESSURE REDUCING CONTROL VALVE with LOW FLOW BY-PASS FEATURE Main Line
EXHIBIT "A. Technical Specifications for Water and Sewer Service Lines
EXHIBIT "A Technical Specifications for Water and Sewer Service Lines Water and Sewer Line Bedding and Backfill: Drawings show cross-section of trench, pipe laid on top of 6" min. bedding material, bedding
ENGINEER S LIST OF APPROVED ITEMS POTABLE WATER SYSTEM
ENGINEER S LIST OF APPROVED ITEMS POTABLE WATER SYSTEM General 1. All products must be NSF 61 approved for potable water service 2. All products with brass or bronze must be lead free 3. Advanced written
DeZURIK 3-20" BAW AWWA BUTTERFLY VALVES WITH TRANSFER MOLDED SEAT
3-20" BAW AWWA BUTTERFLY VALVES WITH TRANSFER MOLDED SEAT Instruction D10386 August 2013 Instructions These instructions provide installation, operation and maintenance information for BAW Butterfly Valves.
Fittings and valves. Ductile cast iron valves. for water and gas supply
Fittings and valves Ductile cast iron valves for water and gas supply 1 Valves made of ductile cast iron Reliable, saf The basis cast iron Düker places emphasis on protection: Quality and a long life cycle,
OPERATION AND MAINTENANCE MANUAL 5-1/4 B-84-B-5 FIRE HYDRANT
OPERATION AND MAINTENANCE MANUAL 5-1/4 B-84-B-5 FIRE HYDRANT INDEX AMERICAN - DARLING 5-1/4 IN. B-84-B-5 FIRE HYDRANT OPERATION AND MAINTENANCE MANUAL OPERATION AND MAINTENANCE REPAIRS Operation and Maintenance...
Mueller. Pipe Repair Products. Saddles Tapping Sleeves Pipe Repair Clamps A complete selection for all types of pipe... all from a single source.
Mueller Pipe Repair Products Saddles Tapping Sleeves Pipe Repair Clamps A complete selection for all types of pipe... all from a single source. SERVICE SADDLES Mueller service saddles, available in bronze,
ASME/ANSI B16.1-1998 - Cast Iron Pipe Flanges and Flanged Fittings ASME/ANSI B16.3-1998 - Malleable Iron Threaded Fittings ASME/ANSI B16.
ASME/ANSI B16.1-1998 - Cast Iron Pipe Flanges and Flanged Fittings ASME/ANSI B16.3-1998 - Malleable Iron Threaded Fittings ASME/ANSI B16.4-1998 - Cast Iron Threaded Fittings ASME/ANSI B16.5-1996 - Pipe
SECTION 02720 SANITARY SEWER AND STORM DRAIN SYSTEMS
SECTION 02720 SANITARY SEWER AND STORM DRAIN SYSTEMS PART 1 GENERAL 1.01 SECTION INCLUDES A. The requirements for pipe material and installation in sewer and drainage collection systems. All materials
General Guidelines for Repairing Buried PE Potable Water Pressure Pipes
515 General Guidelines for Repairing Buried PE Potable Water Pressure Pipes Introduction Traditional piping systems have gasket-sealed bell and spigot joints every 20 feet, which can be a potential maintenance
MATERIAL SPECIFICATION MANUAL
MATERIAL SPECIFICATION MANUAL Created Date: 01/25/05 (JJS) Last Revised Date: 11/29/10 (JJS) When working with Pinellas County (EES), suppliers and contractors shall actively follow EES's published material
RUBBER SLEEVE KNIFE GATE VALVE
RUBBER SLEEVE KNIFE GATE VALVE The model knife gate is a wafer valve designed for a wide range of industrial applications. The double-seated design provides bi-directional shut off. The design of the valve
Ford Service Saddles and Tapping Sleeves
THE FORD METER BOX COMPANY, INC. ISO 9001:2008 10002505 Section AA 02/2015 Web Revision 12/17/2015 Ford Service Saddles and Tapping Sleeves Contents Page Recommended Product Application *Steel *C900 Cast
RING JOINT SYSTEMS 207
RING JOINT SYSTEMS 07 08 Table of Contents Model R-88 Pages 10-11 Model R-88 Large Diameter Page 1 Model RH-1000 1000 PSI Coupling Page 13 Model RX-3000 3000 PSI Coupling Page 1 Model RX-3770 3770 PSI
Fire Hydrant Troubleshooting
Fire Hydrant Troubleshooting Pulsation or chatter during opening and flow of water from hydrant. Loose condition in stem at lower valve plate nut. Tighten lower valve plate nut and secure with SS lock
AIR RELEASE, CLEANOUT, AND SEWER MANHOLES
AIR RELEASE, CLEANOUT, AND SEWER MANHOLES **From Hartford IM BLDG(10) DESCRIPTION. This work shall consist of the construction of air release, cleanout, and sanitary sewer manholes; and the furnishing
08.08 Vic-Check Valves
The check valves are a product of computer-assisted innovative engineering with quality features including a new hydrodynamically efficient profile. The Vic-Check valve utilizes a spring-assisted, single-disc
Mustang Series PRESSURE REDUCING CONTROL VALVE WITH PRESSURE SUSTAINING FEATURE. M115-2 (Globe) M1115-2 (Angle) Schematic. Standard Components
Schematic Throttles to reduce high upstream pressure to constant lower downstream pressure Throttles to maintain minimum upstream pressure PRESSURE REDUCING CONTROL VALVE WITH PRESSURE SUSTAINING FEATURE
UL / FM B-1 FIRE PROTECTION PRODUCTS MUELLER 2300 SERIES RESILIENT WEDGE GATE VALVE DESIGN FEATURES
UL / FM MULLR 2300 SRIS RSILINT WDG GAT VALV DSIGN FATURS SCTION Rev. 3-11 Mueller 2300 Series Resilient Wedge Gate Valves Mueller Resilient Wedge Gate Valves have features to make them easier to operate
DESIGN AND CONSTRUCTION GUIDELINES AND STANDARDS DIVISION 33 UTILITIES 33 00 00 SITE UTILITIES
SECTION INCLUDES Domestic Water Fire Water Service Water Well Sanitary Sewer Storm Drains Foundation Drainage RELATED SECTIONS 03 30 00 Concrete 21 00 00 Fire Suppression - Sprinklers 22 00 00 Plumbing
60.12. Depend-O-Lok FxE Expansion Coupling. System No. Submitted By Spec Sect Para Location Date Approved Date. DEPEND-O-LOK FxE EXPANSION COUPLING
60.1 D-O-L FxE expansion couplings are a bolted, split-sleeve design that provides for expansion and contraction at the coupled joint. These couplings are furnished with restraint rings that, when affixed
SUBDRAINS AND FOOTING DRAIN COLLECTORS. A. Construct subdrains, subdrain cleanouts and outlets, and footing drain collectors.
SUBDRAINS AND FOOTING DRAIN COLLECTORS PART 1 - GENERAL 1.01 SECTION INCLUDES A. Subdrains B. Subdrain Cleanouts and Outlets C. Footing Drain Collectors D. Storm Sewer Service and Connections 1.02 DESCRIPTION
SECTION 15064 PVC PRESSURE PIPE AWWA C900
SECTION 15064 PVC PRESSURE PIPE (AWWA C900) PART 1 GENERAL 1.01 DESCRIPTION This section includes materials, installation, and testing of polyvinyl chloride (PVC) pressure pipe conforming to AWWA C900.
ROOF DRAINS TABLE OF CONTENTS
Pictorial Index Product Recommendations Roof Drain Selection Factors Sizing Placement Material & Characteristics Pipe Connection Commonly Specified Options Typical Installations TABLE OF CONTENTS ROOF
NEW CONNECTION INDUSTRIAL PRODUCTS NC.10V NC.20V NC.30V. NC. SD.10 NC. SD.20 NC. F.Clamp
Repair and Construction. Complete stainless steel pipe repair clamps to repair cracks, fractures, pin holes, torn sockets or welded tees, broken asbest-cement pipe coupling and more. Available for all
SECTION 06000 WATER DISTRIBUTION SYSTEMS TABLE OF CONTENTS
SECTION 06000 WATER DISTRIBUTION SYSTEMS TABLE OF CONTENTS 06010 WATER DISTRIBUTION PIPE A. Design B. Materials C. Installation 06020 FIRE PROTECTION A. Fire Hydrants B. Automatic Fire Sprinkler Systems
Telescoping Post Indicator Wall Post KENNEDY VALVE ISO 9000 ISO 14001
Telescoping Post Indicator Wall Post KENNEDY VALVE ISO 9000 ISO 14001 Telescoping Post Indicator 2945 A 1" SQUARE STEM 9" MAX. = 10" MIN. = 7" FIELD ADJUSTMENT INSTRUCTIONS 1. Remove the top section from
JCM GENERAL PRODUCT DIRECTORY Effective March 1, 2010 Replaces 01/12/2007
JCM GENERAL PRODUCT DIRECTORY Effective March 1, 20 Replaces 01//2007 UNIVERSAL CLAMP COUPLINGS / REPAIR FITTINGS Page 1 Universal Clamp Coupling - Standard Range...4-2 Universal Clamp Coupling - Extended
TABLE OF CONTENTS SECTION 500 SANITARY SEWER AND FORCE MAIN
TABLE OF CONTENTS SECTION 500 SANITARY SEWER AND FORCE MAIN Starts on Page 500 GENERAL... 2 501 MATERIALS... 2 502 CONSTRUCTION PROCEDURES... 7 503 ABANDONMENT OF EXISTING SANITARY SEWER FACILITIES...
SECTION 15076 CEMENT-MORTAR LINED AND COATED STEEL PIPE
SECTION 15076 CEMENT-MORTAR LINED AND COATED (CML&C) STEEL PIPE PART 1 GENERAL 1.01 DESCRIPTION This section designates the requirements for steel pipe fabrication, test in shop, installation of steel
DARTMOUTH COLLEGE DESIGN January 3, 2012 & CONSTRUCTION GUIDELINES
SECTION 15062 STEAM AND CONDENSATE PIPING PART 1 DESIGN DIRECTIVES 1.1 QUALITY ASSURANCE A. Comply with the provisions of the following: 1.2 DESIGN CRITERIA 1. ASME B 31.9 Building Services Piping : for
SECTION 6 SANITARY SEWER MAIN 6.01 SCOPE
6.01 SCOPE The work covered by this section of the specifications consists of the furnishing of all plant, labor, materials, equipment and supervision and performing all operations involved in the construction
Style 07 Zero Flex Rigid Coupling. Style 75 Flexible Coupling. Style 77 Flexible Coupling 11. Description
Style 07 Zero Flex Rigid Coupling The unique angled pad design adjusts to standard pipe tolerances to positively clamp the pipe to resist flexural and torsional loads. Working pressures are based on standard
MS-3/2009 HDPE (High Density Polyethylene) Pipe and Fittings Specification for Buried Potable Water
MS-3/2009 HDPE (High Density Polyethylene) Pipe and Fittings Specification for Buried Potable Water 105 Decker Court, Suite 825, Irving, TX 75062 P: 469-499-1044 F: 469-499-1063 www.plasticpipe.org HDPE
TECHNICAL SPECIFICATION
THOMAS - G-FLEX GFLEX TECH SPEC CONNECTING INNOVATION JOHANNESBURG TEL: +27 11 794 7594 CAPE TOWN TEL: +27 21 556 5258 POLOKWANE TEL: 015 298 9142 DESIGNER, MANUFACTURER AND DISTRIBUTOR OF PIPE CONNECTION,
S GATE KNIFE GATE VALVE WITH PNEUMATIC ACTUATOR
MAIN FEATURES The pneumatic S GATE knife gate valve is intended for the automatic shut off of pipes of the heavy fluids like slurries and powders. The main fields of application are the water treatment,
STORAGE, INSTALLATION AND MAINTENANCE PROCEDURES
GATE VALVE O.S. & Y 1.0 Periodic Inspections 1.1 The valve stem packing should be inspected at least monthly. If the stem packing shows signs of leakage, simply tighten the adjusting nuts to compress the
James M. Pleasants Company
James M. Pleasants Company SUBMITTAL DATA GAINESVILLE MECHANICAL DECEMBER 20, 2013 PROJECT: GSU: J-183 HUMANITIES LAW BLDG. QUOTE NO:12116 ENGINEER: STEVENS & WILKINSON GASKETED PLATE HEAT EXCHANGER Tag:
BEST PRACTICE GUIDELINES FOR CULVERT LINER SELECTION
BEST PRACTICE GUIDELINES FOR CULVERT LINER SELECTION GENERAL Rehabilitation of culverts with pipe liners is one of several methods available for extending the life of an existing culvert. It is often cost
GAS DISTRIBUTION PRODUCTS STEEL SERVICE TEES
GAS DISTRIBUTION PRODUCTS STEEL SERVICE TEES CONTINENTAL INDUSTRIES ABOUT US THE ULTIMATE CONNECTION Our Company Continental Industries, headquartered in Tulsa, Oklahoma, was formed in 1958 and is today
Fire Hydrant Operation and Inspection
Fire Hydrant Operation and Inspection Fire Hydrant Operation and Inspection What is in this Lesson? 1. Classification of fire hydrants 2. Nomenclature of major hydrant components 3. Operation of compression
LEE S SUMMIT USES PIPE BURSTING TO BROADEN ITS ASSET MANAGEMENT TOOLBOX AND REHABILITATE POTABLE WATER DISTRIBUTION SYSTEM
North American Society for Trenchless Technology (NASTT) No-Dig Show 2010 Chicago, Illinois May 2-7, 2010 Paper D-4-02 LEE S SUMMIT USES PIPE BURSTING TO BROADEN ITS ASSET MANAGEMENT TOOLBOX AND REHABILITATE
THE JERSEY CITY MUNICIPAL UTILITIES AUTHORITY REQUIREMENTS FOR FIRE AND DOMESTIC WATER LINE AND METER INSTALLATIONS
THE JERSEY CITY MUNICIPAL UTILITIES AUTHORITY REQUIREMENTS FOR FIRE AND DOMESTIC WATER LINE AND METER INSTALLATIONS 1) All fire service applications and all domestic service applications two (2) inches
Mechanical Joint Restraints
-15 PVC Pipe Restrainer The PVC mechanical joint restrainer eliminates the need for thrust blocking, tie rodding, or harnessing mechanical joint fittings when they are used with PVC pipe. The key to the
REFER TO SPECIFICATIONS AND STANDARD PLANS FOR DETAILED WATER METER, METER VAULT, AND SERVICE LINE REQUIREMENTS
GENERAL REQUIREMENTS METER, METER VAULT, AND SERVICE LINE REFER TO SPECIFICATIONS AND STANDARD PLANS FOR DETAILED METER, METER VAULT, AND SERVICE LINE REQUIREMENTS METER & METER VAULT: 1. METER AND RADIOREAD
PVC Gasketed & Solvent Weld Pipe
PVC Gasketed & Solvent Weld About Royal Building Products Royal Building Products has been in business for over 100 years when Royal Abbotsford, Canada facility started producing clay. With shift in demand
2013 Edition. Flanged fittings 30"-64" NSF. industrial Applications, water & Wastewater. Certified to ANSI/NSF 61
30"-64" Ductile Iron industrial Applications, water & Wastewater 2 Table of Contents Flanged Fittings for Water 3 Flange Details 5 Flanged Fittings 6 90º and 45º Bend 6 22-1/2º and 11-1/4º Bends 7 Tees
SECTION 02660 WATER DISTRIBUTION SYSTEM. B. The foreman of the contracting crew must speak fluent English.
SECTION 02660 WATER DISTRIBUTION SYSTEM PART 1 GENERAL 1.01 DESCRIPTION: A. This section gives the requirements for installation of water lines, including pipe, valves, and service connections and sampling
POLYETHYLENE ENCASEMENT
FOR DUCTILE IRON PIPE FOR WATER & WASTEWATER, FIRE PROTECTION & INDUSTRIAL APPLICATIONS P2 Table of Contents Polyethylene Encasement 3 Installation Instructions 4 Products for Water, Wastewater and Fire
SECTION 02600 - PIPELINE CONSTRUCTION
SECTION 02600 - PART 1 -- GENERAL 1.1 WORK OF THIS SECTION A. The WORK of this Section includes providing general requirements for pipelines, including pipejoints, specials, and appurtenances, complete
EWE Ball Valve-Type Tapping Valve. EWE Ball-Type Tapping Valve. EWE GBM Tapping Valves. for water and gas
The following overview shows the different EWE tapping valves to help you to make your choice: EWE valve tapping valve for vertical tapping with operating shut-off, for all types of pipe, with external
SANITARY SEWER PIPE AND APPURTENANCES SPECIFICATIONS CITY OF LOCUST, NORTH CAROLINA. Shop drawings or submittals shall be required for the following:
SANITARY SEWER PIPE AND APPURTENANCES SPECIFICATIONS PART 1: GENERAL 1.01 SCOPE Furnish all labor, equipment, materials and incidentals necessary to install and complete the sanitary sewer and/or force
CHAPTER 6 PIPELINE MATERIALS, VALVES AND APPURTENANCES
VALVES AND APPURTENANCES 6.1 PIPELINE MATERIALS All pipe, fittings, packing, jointing material, valves, and fire hydrants shall be new and conform to Section C of AWWA Standards. All pipe material, solder
DUCTILE IRON PIPE JOINTS AND THEIR USES
DUCTILE IRON PIPE JOINTS AND THEIR USES Ductile Iron Pipe Joints and Their Uses By Richard W. Bonds, P.E. DIPRA Research and Technical Director Introduction Joints for Iron pipe have come a long way. About
SECTION 15056 DUCTILE-IRON PIPE AND FITTINGS
SECTION 15056 PART 1 GENERAL 1.01 DESCRIPTION This section includes materials and installation of ductile-iron pipe and fittings for potable and recycled water systems. A written request to use Ductile
Conduit Fittings & Accessories Directional Drilling Conduit Utility Duct Telephone Duct Residential Boxes
CANTEX INC. 301 Commerce Ste 2700 Fort Worth, Texas 76102 817-215-7000 Fax: 817-215-7001 Conduit Fittings & Accessories Directional Drilling Conduit Utility Duct Telephone Duct Residential Boxes YOUR FULL
DESCRIPTION. Stud Bolts for Pressure-Temperature Piping 2-1. General Purpose End-to-End Studs 2-2. Tap End Stud Bolts 2-3. Double End Stud Bolts 2-4
DESCRIPTION PAGE B7 Studs and Nuts Stud Bolts for Pressure-Temperature Piping 2-1 General Purpose End-to-End Studs 2-2 Tap End Stud Bolts 2-3 Double End Stud Bolts 2-4 Sigma Fasteners, Inc. Section 2 STUD
Jay R. Smith Mfg. Co.
Jay R. Smith Mfg. Co. Automatic Backwater Valve SMITH CUSTOMER DRIVEN FLOOD-GATE FEATURES Index Page Flood-Gate Features and Applications 2 How Flood-Gate Works 3 Flood-Gate Operation & Approvals 4 Valve
SERIES ASM NEOPRENE/EPMD FLANGED SINGLE SPHERE CONNECTOR CONNECTORS. Pressures to 225 PSIG (15.51 barg) Temperatures to 230ºF (110ºC)
APPLICATIONS Process Industry Weak Acids Alkalies Compressed Air Pulp & Paper MODELS ASM - Flanged Connection OPTIONS Control Rods Oil & Gas Water & Waste Pump suction & discharge Sea water Chemical lines
Mueller. Pipe Repair Products. A complete selection for all types of gas lines... all from a single source. GAS PRODUCTS DIVISION
Mueller Pipe Repair Products A complete selection for all types of gas lines... all from a single source. GAS PRODUCTS DIVISION MUELLER STAINLESS STEEL REPAIR CLAMPS Mueller offers a full line of stainless
GD200 01 07 Valves Rubber Lined - Centric Fout! Onbekende naam voor documenteigenschap. PRODUCT DATA. General Description BUTTERFLY VALVE
DESIGN Body U section wafer type End Connection EN 1092 PN 6, 10 and 16 ASME B16.5 cl. 150 / B16.47 cl. 150 MSS SP 44 cl. 150 AWWA C207 cl. B, D and E BS 10 table D and E Face to Face EN558-1/2 Series
1-800-654-3872 1-405-273-6302
Anodeless Risers Transition Risers Compression Risers Riser Accessories Transition Risers and Transitions The Right Connection 1-800-654-3872 1-405-273-6302 www.centralplastics.com Risers and Transitions:
The Manitoba Water Services Board SECTION 027030 Standard Construction Specifications September 2013 Page 1 of 21
September 2013 Page 1 of 21 Part 1 General 1.1 DESCRIPTION OF WORK.1 The work described herein shall consist of the construction of sewers including: the supply and installation of pipe, saddles, tees,
4 of 303 10/7/2014 12:51 PM
National Fire Protection Association Report http://submittals.nfpa.org/terraviewweb/contentfetcher?commentpara... 4 of 303 10/7/2014 12:51 PM Second Revision No. 167-NFPA 13-2014 [ Section No. 3.8.1.3
Appendix A: Acceptable pipe and fitting materials
Watercare Services Limited Water and Code of Practice Content from the NZS 4404:2010 Land development and subdivision infrastructure has been reproduced for use in the Infrastructure Design s Manual for
SJT / SJM / SJP Large Vertical Pumps
SJT / SJM / SJP Large Vertical Pumps The Heart of Your Process SJT, SJM, SJP Large Vertical Pumps Product Overview SJT Turbine Ns 1800 < 5000 nq 35 < 110 SJM Mixed Flow Ns 5800 < 8300 nq 113 < 161 SJP
Installation and Operating Instructions Installation Instructions for SS EPE-316L Series
INSTR3010 0406 Installation and Operating Instructions Installation Instructions for SS EPE-316L Series Congratulations on your purchase of this Aqua-Pure high flow, single housing filtration system. This
Chesapeake Section AWWA Symposium
PRESTRESSED CONCRETE CYLINDER PIPE (PCCP) Chesapeake Section AWWA Symposium HANSON PRESSURE PIPE Steve Smith January 16,2014 Interpace Projects with Problems INTERPACE 45 MILLION FEET 11,500 PROJECTS Slide