Index. CUTTING & GOUGING TIPS Alternative Fuel - Cutting & Gouging Tips REGULATORS Single Stage Pressure Regulators
|
|
|
- Shavonne Gilmore
- 7 years ago
- Views:
Transcription
1
2 Index REGULATORS Single Stage Pressure Regulators CUTTING & GOUGING TIPS Alternative Fuel - Cutting & Gouging Tips 6 6 CUTTING TORCHES Model FBA S, QUICK ACTION COUPLINGS Flashback Arrestors 7 7 Quick Action Couplings & Converters 7 ACCESSORIES 8 Roller & Circle Cutting Guides 8 Tip Nuts, Wrench, Hoses 8
3 CYLINDER REGULATORS Regulators General features: Harris regulators are designed and manufactured according to the most recent international standards: EN ISO 2503 FOR CYLINDER & FLOW REGULATORS GAUGES CONFORM TO EN ISO 5171 High pressure capsule seat with PTFE (Tefl on) sealing surface Compressed gas regulators D version have tamperproof self reseating internal safety relief valve (IRV) All regulators supplied with inlet and outlet to suit country One piece encapsulated seat with internal fi lter Tamper proof, self reseating internal safety relief valve IRV Single Stage Regulators Model 818B Single stage gaugeless regulator Applications: Medium duty cutting, heating and welding Designed for all industrial applications in the toughest working conditions Features: Maximum inlet pressure of 230 bar Enough fl ow to cut up to 300 mm. steel Delivery pressure set by turning the knob on the calibrated bonnet UK PART N GAS MAX INLET DELIVERY MAX AIR FLOW (m 3 /h) H1282 Acetylene H1283 Oxygen H1284 Propane Construction Site Supplies - Tel: sales@constructionsitesupplies.co.uk 3
4 Model 801B Single stage two gauge regulator Applications: Medium duty cutting, heating and welding Features: Maximum inlet pressure of 230 bar Enough fl ow to cut up to 300 mm. steel Smooth adjustment, with high precision Side inlet connection availabe UK PART No GAS MAX INLET DELIVERY MAX AIR FLOW (m 3 /h) DELIVERY GAUGE SUPPLY GAUGE H1103 Acetylene H1109 Oxygen H1384 Propane H1104 Oxygen H1115* Acetylene H1116* Oxygen * Side entry inlet connection. Construction Site Supplies - Tel: sales@constructionsitesupplies.co.uk 4
5 HAND CUTTING TORCHES Designed and manufactured according to EN ISO Harris offers torches specifi cally designed for the best performance possible with each fuel gas: Low pressure system with Acetylene, Propane, LPG and MAPP : Injector style Low pressure head mixing - fuel gas can be used at pressures as low as bar Steady preheat fl ame during cutting Less fuel gas intake during cutting Pays for itself by drawing all fuel gas out of cylinder Standard torches are not supplied with inlet hose connections or cutting tips Model Head...for Acetylene and low-cost fuel gases such as Propane, Natural Gas, MAPP Gas, and Propylene The industry standard by which all other designs are compared. The 62-5 is less expensive to own, operate and safer to use. Our special 62 F injector mixer can produce the hottest fl ame possible at the lowest gas pressure making it the safest, most effi cient design in the industry. Cuts up to 300 mm steel Solid forged head and lever Triangular tube design Brazed connections Head mixing Use with 6290 tips (see page 30-31) 70 Head 180 Head UK Part No PROPANE 90 Head 70 Head 180 Head Model No Weight (Kg) UK Part No Model Weight (Kg) UK Part No Model Weight (Kg) Length (mm) H F H BF H FL H AFL H FL H AFL H BFL H FL H AFL H BFL H FL H AFL H BFL H FL H FL H AFL ACETYLENE H Construction Site Supplies - Tel: sales@constructionsitesupplies.co.uk 5
6 Heavy Preheat 6290-NFF Oxy-Propane, Natural Gas Tip Chart Plated Shell UK PART No MODEL PLATE THICKNESS (mm) OXYGEN FUEL GAS Equal Pressure FUEL GAS Low Pressure H NFF H NFF H NFF H NFF H NFF H NFF Flashback Arrestors Prevent reverse fl ow of gases with built-in check valve Extinguish fl ashback fi re with sintered metal fi lter Thermal cut-off which positively shuts off the gas in case of hose fi re, burn or repeated fl ashbacks (only T version) Pressure operated cut-off which positively shuts off the gas when pressure exceeds (only 3T version) Regulator type T UK PART No FUEL GAS MAX FLOW l/h MAX * OX AC LPG H 2 INLET THREAD OUTLET THREAD H1308 Fuel gas /8 -BSPF LH 3/8 BSPM LH H H1307 H1307 Ox /8 -BSPF RH 3/8 BSPM RH *1 bar=100 kpa Construction Site Supplies - Tel: sales@constructionsitesupplies.co.uk 6
7 FBA S QUICK ACTION COUPLINGS Check Valves Torch type Help prevent dangerous reverse fl ow mixing of gas in the hose Compact light weight design add extra operator safety UK PART UK MODEL FUEL GAS MAX * OX AC LPG H 2 INLET THREAD OUTLET THREAD H SVL Fuel gas /4 BSPM LH 1/4 - BSPF LH H SVR Ox /4 BSPM RH 1/4 -BSPF RH H CVTL Fuel gas /16-18-UNF-2A-LH 9/16-18-UNF-2B-LH H CVTR Ox /16-18-UNF-2A-RH 9/16-18-UNF-2B-RH H GBL Fuel gas /8 BSPM LH 3/8 -BSPF LH H GBR Ox /8 BSPM RH 3/8 -BSPF RH *1 bar=100 kpa 88-6CVT (L&R) Quick Action Couplings Long lasting stainless steel pin connection Automatic gas cut-off to positively shut off the gas supply when disconnected Durable brass and stainless steel construction Manufactured in accordance with EN561 & ISO7289 UK PART No MODEL DESCRIPTION CONNECTION TYPE TYPE H4354 CPL6 Hose connection Ø 1/4 (6 mm) H4355 CPR6 Hose H4356 CPL8 Hose connection Ø 5/16 (8 mm) H4357 CPR8 Male H4348 CPL Threads 9/16-18-UNF-2B-LH CPLGB QACLGB H4349 CPR H4358 CPLGB Threads 9/16-18-UNF-2B-RH Threads 3/8 -BSPF LH Torch H4379 CPRGB Threads 3/8 -BSPF RH H4351 QACL6 H4360 QACR6 Hose connection Ø 1/4 (6 mm) H4361 QACL8 H4360 QACR8 H4362 QACL10 H4363 QACR10 Female Hose connection Ø 5/16 (8 mm) Hose connection Ø 3/8 (10 mm) Hose CPL8 QACL8 H4364 QACLGB H4365 QACRGB Threads 3/8 -BSPF LH Threads 3/8 -BSPF RH Regulator Converters UK PART No MODEL FROM (FEMALE) TO (MALE) 38-2GBL 38-2GBR H GBL 9/16-18-UNF-3B-LH 3/8 BSPM LH H GBR 9/16-18-UNF-3B-RH 3/8 BSPM RH H GR 9/16-18-UNF-3B-RH 1/4 BSPM RH H GL 9/16-18-UNF-3B-LH 1/4 BSPM LH Construction Site Supplies - Tel: sales@constructionsitesupplies.co.uk 7
8 ACCESSORIES Tip Nuts UK PART. N CUTTING TORCHES / CUTTING ATTACHMENTS TIPS H , 142, 198, 49-3, 62-5, 73-3MX 6290 H H MX, 242NMGB 8290 Tip Cleaners (H2160) C-9 Calibrated tip cleaner for hand cutting tips (H3125) E-9 Calibrated tip cleaner for machine cutting tips Welding & Cutting Hoses Hoses higly resistant to abrasion and fl ame Hoses conform to EN 559 Fitted lenghts conform to EN 1256 Available in 6 mm, 8 mm and 10 mm diameter, Oxygen, Acetylene and Propane. Construction Site Supplies - Tel: sales@constructionsitesupplies.co.uk 8
WELDING & CUTTING MAIN EQUIPMENT
GASES DIVISION GAS WELDING & CUTTING EQUIPMENT WELDING & CUTTING MAIN EQUIPMENT GAS WELDING & CUTTING KIT The MARIGASES GAS WELDING AND CUTTING KIT is a high quality set containing all the tools and components
BROEN UNiFlEx FiTTiNgs FOR BURNiNg gases OEN OEN ifl ifl FOR FOR BURN BURN gas gas
BROEN UNIFLEX Fittings FOR BURNIN ASES BROEN UniFlex TM Fittings for burning gases BROEN UniFlex TM Fittings for burning gases LAB Table of Contents Content Page Table of Content 2 Product Overview 3 BROEN
THE WHOLE WORLD OF GAS SAFETY ENGINEERING. MINISPRAYJET Flame spraying gun
MINISPRAYJET MINISPRAYJET Flame spraying gun MINISPRAYJET A compact and light weight flame spraying gun Flame spraying gun thermal spraying with powder using oxy-fuel gas flame. Function and safety are
INDEX. Tips can be ordered by OEM Mfg numbers or by Goss Mfg numbers.
INDEX Goss, Inc has been manufacturing high quality replacement torch tips and torch tool equipment for over sixty years. This progress is attributed to our many satisfied customers along with the constant
Pipe threads for tubes and fittings where pressure-tight joints are not made on the threads. (requires PTFE sealing tape or liquid sealant).
Fittings for CO 2 Pipe Threads Pipe thread references quoted in this catalogue conform with the requirements specified in the latest issue and amendments of the following ISO Standards: ISO 7-1 (BS21)
Welding and cutting torches - light version page 2. standard version page 4. 3-tube cutting torches and attachments (nozzle mix type) page 7
Welding and cutting torches - light version page 2 Welding and cutting torches - standard version page 4 3-tube cutting torches and attachments (nozzle mix type) page 7 Pressure regulators page 8 Safety
EDITION 2/2013 CENTRAL GAS SUPPLY HIGH PRESSURE MANIFOLDS AND OUTLET POINTS FOR INDUSTRIAL GASES
EDITION 2/2013 CENTRAL GAS SUPPLY HIGH PRESSURE MANIFOLDS AND OUTLET POINTS FOR INDUSTRIAL GASES GCE WORLDWIDE Sales office Sales representation Headquarters Production units Stock point www.gcegroup.com
Chapter 5 - Aircraft Welding
Chapter 5 - Aircraft Welding Chapter 5 Section A Study Aid Questions Fill in the Blanks 1. There are 3 types of welding:, and, welding. 2. The oxy acetylene flame, with a temperature of Fahrenheit is produced
AIR LINE VALVES AND GAUGES
AIR LINE VALVES AND GAUGES INGERSOLL-RAND AIR LINE VALVES AND GAUGES Maintaining consistent air pressure throughout the entire system is crucial for maximum performance and productivity. Ingersoll-Rand
Guide rail bracket (for adjustable heads)
(for adjustable heads) Part. 209 40 ø,5 ø10,5 2 2,5 115 15 42 5 11 37 72 4 70 Code 209 / 0754 MATERIALS: Bracket made out of reinforced polyamide black colour. FEATURES: To be used with heads Part.221,
HEAVY-DUTY HAND CUTTING TORCHES AND ACCESSORIES. Page 1 Version no.: V0-090902
Page 1 HEAVY-DUTY HAND CUTTING TORCHES AND ACCESSORIES Page 2 Heavy-Duty Hand Cutting Torch HCT 663: With lever-operated valve for cutting oxygen, for cutting duties involving high thermal loads on slabs,
Ve-Lock manufactures Needle Valves from Solid bar stock Materials & all parts details are as below:
Needle Valves : - Needle valves have a slender, tapered point at the end of the valve stem that is lowered through the seat to restrict or block flow. Fluid flowing through the Needle valve turns 90 degrees
Chapter 5 Gas welding & cutting
Chapter Gas welding & cutting 0-00 Gas welding & cutting 00-09 -0 877-0 Brazing Through the heating action of a rch flame, filler metal (solder) is drawn in the annular space of the joint. This phenomenon
VALVES FOR REFRIGERATING SYSTEMS
VALVES FOR REFRIGERATING SYSTEMS FROM QUALITY OUR NATURAL DEVELOPMENT Achieved the goal of fi fty years working in the industry of Refrigeration and Air Conditioning, Castel Quality Range of Products is
Type 3353 Angle Seat Valve
Type 3353 Angle Seat Valve Application On/off valve with pneumatic piston actuator Nominal size DN 15 to 50 (NPS ½ to 2) Nominal pressure PN Temperature range 10 to 180 C Globe valve with an angle seat
Pressure Vessels (Air Compressors) and LPG Tanks
Pressure Vessels (Air Compressors) and LPG Tanks 1. Identification of Workplace Hazard Any container, tank or vessel that contains pressurized material is a potential hazard to employees due to the force
API Flanged Safety Relief Valves Series 526 CATALOG
API Flanged Safety Relief Valves Series 26 CATALOG The-Safety-Valve.com 1 Valve finder How to find the right product group High operating to set pressure ratio, high backpressure or low total height? Yes
GAS CYLINDER SAFETY. 2. GRADES OF GASES BOC have divided the gases that they supply into 3 grades.
GAS CYLINDER SAFETY Contents 1. INTRODUCTION 2. GRADES OF GASES 3. PRESSURES 4. TYPES OF REGULATORS 5. CYLINDER TRANSPORT 6. STORAGE 7. KEEPING THE SYSTEM SAFE 8. PROBLEM REGULATORS OR ATTACHMENTS 9. FURTHER
MAKING MODERN LIVING POSSIBLE. Thermostatic valve AVTA. Technical brochure
MAKING MODERN LIVING POSSIBLE Thermostatic valve AVTA Technical brochure 2 IC.PD.500.A3.02-520B3728 Danfoss A/S 07-2009/ RA-MC/mr Contents Page Features............................................................................................4
Solenoid valves 2/2-way direct-operated Type EV210A
Solenoid valves 2/2-way direct-operated Type EV210A Features EV210A NC and NO Very compact valves for industrial application, such as control and dosage For water, oil, compressed air and similar neutral
Check Valves & Actuated Valves
heck Valves & ctuated Valves & U Series Piston non-return valves rated 6,000 psi & 10,000 psi X Series Piston non-return valves rated 20,000 psi Pneumatic ctuators Pneumatically actuated valves Electric
PREST-O-LITE from ESAB
PREST-O-LITE from ESAB A full line of gas apparatus solutions for every application, industry, and environment. A Tradition of Excellance Since 1904, professional welders have relied on PREST-O-LITE 's
Robot Welding Torch System
T e C H N O L O G y f O R T H e W e L d e R s W O R L d. Robot Welding Torch System W W Robot welding torch system... The universal MIG/MAG-torch system for robot welding: A new interface and cable assembly
SMARTY 160 POWER page 4-5 SMARTY 180 / 220 XL page 4-6 SMARTY TX 250 page 4-7. SMARTY TX 160 Alu page 4-8 SMARTY TX 220 Alu page 4-9
CHAPTER TIG welding Introduction pages - & - WELDING POWER SOURCES DC power sources SMARTY 60 POWER page -5 SMARTY 80 / 0 XL page -6 SMARTY TX 50 page -7 AC/DC power sources SMARTY TX 60 Alu page -8 SMARTY
Regulator Options and Accessories
Regulator Options and Accessories Regulator accessories are available separately or mounted on Swagelok regulators. Some accessories limit regulator pressure or temperature ratings. Additional materials,
Thermostatic element RAVV for 2-way valves
Description / Application RAVV is a self-acting thermostatic element which can be combined with 2-way valve bodies RAV-/8, VMT-/8 or VMA 15. RAVV is used to control temperatures in small hot water cylinders
MACHINES RECOVERY SYSTEMS SUPEREVAC CHARGING HOSES VACUUM AND HOSE ADAPTERS, VALVES AND PARTS CHARGING SYSTEMS GAUGES INSTRUMENTS ELECTRONIC
RECOVERY SUPEREVAC 29 RECOVERY 1/4" 4-IN-1 BALL VALVE TOOL For vacuum, charge, cores and recovery 18997 18975 18971 18978 18979 Remove and replace Schrader cores without losing charge. Extra 1/4" side
FIRE EXTINGUSIHER INSPECTION, MAINTENANCE, AND TESTING PROCEDURES
FIRE EXTINGUSIHER INSPECTION, MAINTENANCE, AND TESTING PROCEDURES Fire and Life-Safety Group (FLS) FLS has organized the following information to act as a guideline/checklist for any inspection, maintenance,
NITROUS TRANSFER PUMP INSTRUCTIONS
NITROUS TRANSFER PUMP INSTRUCTIONS SAFETY TIPS Never directly inhale nitrous oxide. When inhaled in large quantities, nitrous oxide can cause respiratory ailments or in extreme cases, death by suffocation.
air water oil antifreeze grease diesel fuel kerosene oxygen-acetylene lpg-methane electricity Hose & cable reel
air water oil antifreeze grease diesel fuel kerosene oxygen-acetylene lpg-methane electricity Hose & cable reel Catalogue 2008 Table of contents Series standard hose reels in painted steel page 5-6 For
DMP 331. Industrial Pressure Transmitter for Low Pressure. Stainless Steel Sensor
DMP Industrial Pressure Transmitter for Low Pressure Stainless Steel Sensor accuracy according to IEC 60770: standard: 0.5 % FSO option: 0.5 / 0. % FSO from 0... 00 mbar up to 0... 40 bar Output signals
Welding Reels HANNAY REELS. For use for: Arc Welding Gas Welding Cutting Operations H-9422-W Rev. 5. The reel leader.
Welding Reels HANNAY REELS For use for: The reel leader. Arc Welding Gas Welding Cutting Operations H-9422-W Rev. 5 Series SWCR/WCR Arc Welding Reels: Power or Manual Rewind To handle cable to 400 amps.
Thermostatic valve Type AVTA
MAKING MODERN LIVING POSSIBLE Data sheet Thermostatic valve Type AVTA Thermostatic valves are used for proportional regulation of flow quantity, depending on the setting and the sensor temperature. The
Standard Operating Procedure (SOP) Acetylene and Oxygen Safe Use for Welding
SPECIAL HAZARDS OF ACETYLENE Acetylene is the most common gas used for fueling cutting torches. When mixed with pure oxygen in a cutting torch assembly, an acetylene flame can theoretically reach over
Assembly and instructions
Assembly and instructions Franke Minerva 3-in-1 Kettle Tap Retain for reference NB: For use only with Franke Heating Tank INTRODUCTION The Kettle Tap is suitable for dispensing boiling water (100 C) and
ORLANDO srl. M P R 50 025 OPTIMA Radial pressure gauges for swimming-pools 0-2,5 Bar
Chiavari (Ge) - Italia Tel.: Italia + 0185 + 38.50.10 Fax: Italia + 0185 + 38.50.11 e-mail: orlando@orlando.it Http://www.orlando.it M R 50...: Radial pressure gauge ø 50 ( available scale in bar: 4, 6,10,12,16
AUTOMATIC CHANGEOVER MANIFOLD Series 915
AUTOMATIC CHANGEOVER MANIFOLD Series 915 FEATURES Fully automatic, simple, hassle-free operation No variance in delivery pressure Designed for ultra high purity gas service Built-in audio and visual alarm
Oxy-Fuel Gas Welding. Given a functional oxy-fuel gas unit, instruction and demonstration of use, each student will be able to:
I. Competencies Oxy-Fuel Gas Welding Given a functional oxy-fuel gas unit, instruction and demonstration of use, each student will be able to: A. Identify the major parts of the oxy-fuel gas unit. B. Pass
PRODUCT RELEASE CKMTA12 / 24. Copyright 2011 by ARB Corporation Limited
PRODUCT RELEASE CKMTA12 / 24 Copyright 2011 by ARB Corporation Limited ARB 4x4 ACCESSORIES 720 SW 34Th Street Tel: (425) 264-1391 Renton, Washington 98057 Fax: (425) 264-1392 USA North and South American
INSPECTION, MAINTENANCE AND RECHARGE SERVICE MANUAL P/N 16303
WATER MIST HAND PORTABLE FIRE EXTINGUISHERS Model B270 ¾ Gallon Model B272 2 ½ Gallon INSPECTION, MAINTENANCE AND RECHARGE SERVICE MANUAL P/N 6303 All fire extinguishers should be installed, inspected
Workshop Compressors CLASSIC Series
www.kaeser.com Workshop Compressors CLASSIC Series Displacement: 210 to 40 l/min Pressure: 10 bar What do you expect from your CLASSIC workshop compressor? Quality results can be achieved only by using
GAS DISTRIBUTION PRODUCTS STEEL SERVICE TEES
GAS DISTRIBUTION PRODUCTS STEEL SERVICE TEES CONTINENTAL INDUSTRIES ABOUT US THE ULTIMATE CONNECTION Our Company Continental Industries, headquartered in Tulsa, Oklahoma, was formed in 1958 and is today
FRL/AirCare Air Controls & Accessories
FRL/irare ir ontrols & ccessories Lincoln Regulators, Filters & Lubricators well-planned compressed air system ensures minimum pressure loss in the system, and the removal of contaminants: water, compressor
ELLIOTT COLLET STYLE Baffle Expander With Hydraulic Power Supply
TM-37 07-29-04 Elliott offers a complete line of precision tube tools, including: tube expanders Boiler Expanders Heat Exchanger Expanders Condenser Expanders Refinery Expanders tube rolling motors & torque
Thermostatic actuator RAVV - for 2-way valves RAV-/8 (PN 10), VMT-/8 (PN 10), VMA (PN 16)
- for 2-way valves RAV-/8 (PN 10), VMT-/8 (PN 10), VMA (PN 16) Description RAVV can be combined with 2-way valves RAV- /8, VMT-/8 or VMA 15. Controller closes on rising temperature. There is a special
SIZING AND CAPACITIES OF GAS PIPING
APPENDIX A (IFGS) SIZING AND CAPACITIES OF GAS PIPING (This appendix is informative and is not part of the code.) A.1 General. To determine the size of piping used in a gas piping system, the following
Table of Contents. Overview 1. Pump Disassembly 2. Control Disassembly / Reassembly 7. Pump Reassembly 13. Adjustment Procedures DR Control 19
Table of Contents Overview 1 Pump Disassembly 2 Control Disassembly / Reassembly 7 Pump Reassembly 13 Adjustment Procedures DR Control 19 Adjustment Procedures DRG Control 20 Adjustment Procedures DFR
CALEFFI. Compact automatic flow rate regulator with polymer cartridge. 127 series 01166/09 GB
Compact automatic flow rate regulator with polymer cartridge 127 series REGISTERED BS EN ISO 9001:2000 Cert. n FM 21654 UNI EN ISO 9001:2000 Cert. n 0003 CALEFFI 01166/09 GB Function The AUTOFLOW devices
KF Needle & Gauge Valves
KF Needle & Gauge Valves Superior Fluid Control Products KF O-Ring & Packed Stem Style Needle Valves KF Needle Valves combine rugged construction, dependability and leak-free performance at high and low
NFPA31FuelOilPiping 1 Revised 3-1-11
NFPA 31 Fuel Oil Piping, Installation and Testing Chapter 8 Fuel Piping Systems and Components 8.1 Scope. This chapter shall apply to piping systems and their components used to transfer fuel oil from
Diagram of components 2. Reducer..3
Index Diagram of components 2 Reducer..3 Rail Filter - Rail Filter 4 - MAP Sensor.4 Injector & Nozzle - Single Injector / Rail Injector...5 - Bi-Fuel Connector...6 - Nozzle...7 ECU...8 Switch 9 Wiring
Single Deadman 150 psi (10.3 bar) Air Lifting Bag (ALB) Controller
Specifications Single Deadman 150 psi (10.3 bar) Air Lifting Bag (ALB) Controller Introduction These purchase specifications cover the minimum requirements of a Single Deadman Air Lifting Bag (ALB) Controller
CABINET. A Clean Burn Heat Exchanger provides approximately 200% more surface area for capturing combustion heat. You get more heat from less oil.
Lanair Clean Burn CABINET Lanair's lightweight heat exchanger provides very little travel for the heat to be picked-up and ultimately be transferred to your shop. It uses a 2-pass design made up of 12
Machine needle shut-off nozzle type-a
Machine needle shut-off nozzle type-a spring operated Applications: Thermoplastics (not applicable for PVC) Shut-off mechanism: Operated with one axial high performance spring Index of contents Chapter
Varel International Workover Bits for remedial, re-entry AND frac plug Drilling Applications
Varel International Workover Bits for remedial, re-entry AND frac plug Drilling Applications Varel International offers the industry's broadest selection of high quality drill bits for remedial, re-entry
TBi Industries. MIG / MAG Welding torches TBi Expert 0. 1
TBi Industries MIG / MAG Welding torches TBi Expert 1 0. 1 CONTENTS. TBi Expert Gas cooled torches TBi 150 Classic Series 60% (10 min.) Mix : 150 A CO 2 : 180 A Ø 0.6-1.0 mm Water cooled torches TBi 240
Typical Aluminum GFM Mass Flow Meter
MASS FLOW METERS Design Features n Rigid metallic construction. n Maximum pressure of 1000 psig (70 bars). n Leak integrity 1 x 10-9 of helium. n NIST traceable certification. n Built-in tiltable LCD readout.
Data sheet Radiator Thermostats type RA 2000 Valve bodies type RA-FN and RA-G
Data sheet Radiator Thermostats type RA 2000 Valve bodies type RA-FN and RA-G EN 215-1 HD 1215-2 Application RA 2910 built-in sensor RA 2920 tamperproof RA 5062 remote sensor temperature adjuster RA-FN
Thermostatic Sensor RAS-C² with RA-FN Radiator Valve (Fixed Capacity)
Data Sheet Thermostatic Sensor RAS-C² with RA-FN Radiator Valve (Fixed Capacity) Application RAS-C² thermostatic sensor RA-FN angle valve The RAS-C² thermostatic sensor is a selfactuating proportional
HIGH PRESSURE TECHNOLOGY HYDRAULICS PNEUMATICS TESTING EQUIPMENT
HIGH PRESSURE TECHNOLOGY HYDRAULICS PNEUMATICS TESTING EQUIPMENT MAXIMATOR GmbH 2 MAXIMATOR has an extensive know-how concerning concept, development, construction and manufacturing of test benches and
Flanged and Butt-= Weld Type
Document : PG00 Year : 09 Product Group 00 Flanged and Butt-= Weld Type (LNG and LPG) Page 09 Document : PG00 Year : 09 Product Group 00 Cryogenic Butterfly valves The Cryogenic Butterfly Valve Design
All Safe, Inc. Sherwood Master Distributor Toll Free: 866-958-3473 Fax: 651-408-7163 Email: info@allsafe.net www.allsafenet
Toll Free: Fax: 651-408-7163 Email: info@allsafe.net www.allsafenet SHERWOOD GLOBAL VALVE FEATURES Durable forged brass body, precisely machined internal components and design elements meet the most stringent
Itho Products for Hot and Boiling water. product-
Itho Products for Hot and Boiling water product- 2 This booklet provides additional information on the range of hot and boiling water appliances by Itho. The data will allow you to determine which product
POSEIDON 2-29, 2-25 & 2-22 POSEIDON 2-29, 2-25 & 2-22 XT
POSEION 2-29, 2-25 & 2-22 POSEION 2-29, 2-25 & 2-22 XT Repair Manual Index A. Safety precautions 3 B. Technical data 4 C. Structure 5-6. Service / Repair 7-23 E. Tools 24 F. Function 25-26 G. Electric
ball valves Flomite 71 Series 2-way Integral Panel Mount Ball Valves
2-way Integral Panel Mount Ball Valves Used for quick on-off service with a visual indication of flow, HOKE s 2-way ball valves offer orifice sizes up to 0.25 (6.4mm). Flomite valves feature a floating
Assisted lift operated 2/2-way solenoid valves Type EV250B
MAKING MODERN LIVING POSSIBLE Data sheet Assisted lift operated 2/2-way solenoid valves Type EV250B EV250B with assisted lift can operate from zero and up to 10 bar differential pressure. This 2/2-way
Solar Hot Water Heaters
Solar Hot Water Heaters Three High Vacuum Water inlet Stainless Steel screw Gel seal and insulation Water outlet Dust proof seals Non Pressure Models Details ASWH-1b ( Color Painted 304 ) ASWH-1c ( stainless
Solenoid valves Type EVU
Data sheet Solenoid valves EVU EVU solenoid valves are designed to fit into compact refrigeration systems. Available in direct and pilot operated versions, they can be applied in liquid, suction, and hot
Double-Headed Screw 1. 3/4" FIP x 3/4" MIP x 1/4" hole 2. 3/4" Fip x 3/4" MIP. Feed Water Connector 1. 1/2" FIP x 1/2" MIP x 1/4" OD 2. 3.
Picture Item No. Description RO- 0010 Brass Water Feed 1. 3/4" FIP with 1/4" hole 2. Using on R.O. tank RO- O020 Double-Headed Screw 1. 3/4" FIP x 3/4" MIP x 1/4" hole 2. 3/4" Fip x 3/4" MIP RO- 0030 Brass
Self-operated Temperature Regulators Temperature Regulator Type 1u
Self-operated Temperature Regulators Temperature Regulator Type u Application Temperature regulators for cooling installations Control thermostats for set points ) from 0 to 250 C G ½ to G or DN 5 to 50
Direct Operated Regulator for 6.0 MPa (Relieving Type) How to Order. Body size 30 40
Direct Operated Regulator for (Relieving Type) Series Service life: 0 million cycles Using NSF-H-certified grease on the guide ring (sliding) part. Improved durability under a high environment with a polyurethane
Art.S001-S002 SOLAR MODULE WITH DELIVERY AND RETURN CONNECTIONS
Art.S001-S002 SOLAR MODULE WITH DELIVERY AND RETURN CONNECTIONS Technical Information sheet 0001/07/Rev01 ENG FUNCTION Series S001 and S002 circulation units are applied to the primary circuit of solar
PARTS CATALOG RPPCR01111_Front_Backcx.indd 1 RPPCR01111_Front_Backcx.indd 1 11/21/11 1:41 PM 11/21/11 1:41 PM
PARTS CATALOG RPPCR01111_Front_Backcx.indd 1 11/21/11 1:41 PM RELIANCE Has Everything Your Customers Need to Do the Job Right! Reliance Water Heater Company was founded in 1981 to provide a water heater
Rules for Classification and Construction Additional Rules and Guidelines 3 Machinery Installations
VI Rules for Classification and Construction Additional Rules and Guidelines 3 Machinery Installations 5 Guidelines for Design, Equipment and Testing of Gas Welding Installations on Seagoing Ships Edition
KIRÁLY TRADING KFT H-1151 Budapest Mogyoród útja 12-14 tel: 061307-3801 Email_pzoli@kiralytrading.hu. Clamps Clamping devices
04000 Clamps Clamping devices 23000 22000 21000 20000 09000 08000 07000 06000 05000 04000 03000 02000 01000 297 04010 Adjustable straps Tempered steel 1.1191 Black oxide finish nlm 04010-101 Suitable thrust
CRANE. Σελίδα 1 από 2. Dimensions and Weights. Weight (kg) Size
CRANE Σελίδα από 2 DM93 Variable Orifice Double Regulating Valve PN6 Cast Iron Balancing Valve (VODRV), Flanged to BSEN 92-2 The DM93 variable orifice double regulating valves will give satisfactory performance
SUPERYACHT SPARES. Nozzles and portable monitors. www.superyachtspares.com / info@superyachtspares.com / +31 183 639193
Nozzles and portable monitors Rosenbauer - Nozzles and portable monitors EN Maximum extinguishing effect. Minimal water consumption. The Rosenbauer nozzle enables the manual adjustment of the water flow
SAFETY SAFETY APPAREL 20,000 PSI
SAFETY APPAREL TurtleSkin Water Armor is designed for UHP safety. Protection up to 2800 bar or 40,000 psi One size fits all money-saving design Modular design allows you to buy only what you need Replacement
SELECTION, APPLICATION AND MAINTENANCE
DIESEL PROTECTION SYSTEMS D-Series Engine Automatic Overspeed Shut Down Valves (Spindle Types with Air Pressure and Manual Shut Down Options) SELECTION, APPLICATION AND MAINTENANCE Valve Numbers D92-AP
TAMPERS. 9949 Tabor Place, Santa Fe Springs, California, CA 90670, U.S.A.
TAMPERS Website: www.apt-tools.com e-mail: info@apt-tools.com TDS-1064 Rev A S TOOL MAINTENANCE & REPAIR INFORMATION FIELD OPERATION: Before use: 1. Check the tamping butt lock screw, it must be tightened
automatic Changeover regulators and systems manifolds/changeover regulators
automatic Changeover regulators and systems manifolds/changeover regulators DCHOV1908X012 ACS012 - Low Flow Changeover Regulator maximum inlet pressure: 400 or 3500 psig / 27.6 or 241 bar Four delivery
Compressor Service & Maintenance Manual
Compressor Service & Maintenance Manual C Series COMPRESSOR (D)C1103 (D)C1203 (D)C2106 (D)C2206 (D)C3210 Copyright 2006 DCI. All Rights Reserved. 92311, Rev. C, 08/13 1 C1000 Series Service & Maintenance
2 H OW TO ORDER 2 D ESIGN FEATURES 3 P RODUCTS INDEX 35 O VAL FLANGES 35 B LEED 35 C ONDENSING POTS 36 S YPHONS 36 A IR FEED HEADERS
MEK PIPING srl www.mekpiping.com Sede legale/headquarter : Via San Giovanni osco zona P.I.P. Poggiorsini, () 70020 Tel / Fax + 39 080 37063 - Mob. +39 346 3438582 - E-MIL: mekpiping@mekpiping.com P.IV
Self-operated Pressure Regulators Universal Pressure Reducing Valve Type 41-23
Self-operated Pressure Regulators Universal Pressure Reducing Valve Type 41-23 Application Pressure regulators for set points from 5 mbar to 28 bar Valves in nominal sizes DN 15 to 100 Nominal pressures
Thermal flow sensors TA10-ZG8c and TA10-ZG9c for exact and stable, long-term measuring of lower flow velocities (Laminar Flow)
Thermal flow sensors TA10-ZG8c and TA10-ZG9c for exact and stable, long-term measuring of lower flow velocities (Laminar Flow) Drawing 8c Drawing 9c U391_TA10C_DoP_e_150421 www.hoentzsch.com 1 of 5 Measured
Electronic Wallmount Faucet 1500T4 & 1501T4 Series
Electronic Wallmount Faucet 1500T4 & 1501T4 Series Specification: (example) Battery (4 C cell) or Hardwire (24 VAC) infrared electronic handwash system H 2OPTICS technology no external adjustments required
AIR-AIR PRESSURE MULTIPLIER (BOOSTER)
AIR-AIR PRESSURE MULTIPLIER (BOOSTER) The air-air pressure multiplier, or booster, is an automatic device that compresses air to give an outlet pressure that is double the inlet pressure. It is normally
Adsorption air dryers ADS 1 215
Adsorption air dryers ADS 25 INDUSTRY CUSTOMER SERVICE COMPRESSED AIR AIR INTAKE 20 C 70% UR 760 mm Hg 2 grh 2 O/m 3 AIR PRESSURE 0 bar COOLING SYSTEM 30 C 00% UR 0 bar 2,8 grh 2 O/m 3 A compressor that
TY-FLO Needle Valves
Design/Features Hard (Vee) or Delrin Soft Seat/Tip Orifice sizes from.17 to.438 in. Flow Coefficients (C V ) from.37 to.7 Straight or angle flow patterns Optional panel mount Handle options available Non-wetted
Regulator Performance Data
Regulator Performance Data The regulator flow data is provided to assist in determining the proper regulator for the required application. The data is given for reference purpose only. If additional information
Atling proudly presents the next generation self centering steady rests ATLING. Ockelbo Sweden. AX Steady Rests
Atling proudly presents the next generation self centering steady rests ATLING Ockelbo Sweden AX Steady Rests 1 The New AX Steady Rest The Atling AX series is the result of several years of development
Heating, Ventilation, Air Conditioning and Refrigeration (HVACR)
Heating, Ventilation, Air Conditioning and Refrigeration (HVACR) I. Demonstrate safety skills in typical HVACR work situations to NATE Core Installer Knowledge Areas for Technician Excellence for Safety
Compact pressure switch Flameproof enclosure Ex d Model PCA
Mechatronic pressure measurement Compact pressure switch Flameproof enclosure Ex d Model PCA WIKA data sheet PV 33.31 for further approvals see page 4 Process Compact Series Applications Pressure monitoring
HAND PUMP OPERATION, SERVICE AND PARTS INSTRUCTION MANUAL
OPERATION, SERVICE AND PARTS INSTRUCTION MANUAL 767 HAND PUMP Read and understand this material before operating or servicing this equipment. Failure to understand how to safely operate this tool could
OHIO MEDICAL CORPORATION. Medical Gas Panel. Installation and Maintenance Manual
OHIO MEDICAL CORPORATION Medical Gas Panel Installation and Maintenance Manual P/N 255105 (Rev.5) 08/2005 P/N 255105 (Rev.5) 08/2005 PAGE 2 OHIO MEDICAL CORPORATION PAGE 3 1.0 User Responsibilities The
REMOVAL AND INSTALLATION
303-01C-1 REMOVAL AND INSTALLATION Engine Body On Special Tool(s) Adapter For 303-D043 303-D043-02 or equivalent Special Tool(s) 303-01C-1 Turbocharger Lifting Bracket 303-1266 Wrench, Fan Clutch Nut 303-214
The Axial Flow Valve. Class 300/600. sales@elster-instromet.co.uk www.elster-instromet.com SERIES
The Axial Flow Valve SERIES Class 300/600 sales@elster-instromet.co.uk www.elster-instromet.com THE AXIAL FLOW VALVE - SERIES 300/600 A UNIQUE REGULATOR What is the Axial Flow Valve? The Axial Flow Valve