Air Compressors. Air Compressors / Fittings & Supplies

Transcription

1 Air Compressors Air Compressors / Fittings & Supplies

2 Air Compressor 3HP Clarke Industrial 100L (230V) This quality belt driven air compressor is designed with industrial & commercial users in mind. With the air capacity, & power, to drive many of the most commonly used air tools, it will satisfy the air requirements of garages, small factories, workshops and farms. And it benefits from an aerodynamic bladed flywheel, positive splash-feed piston lubrication and twin cast iron cylinders; all lead to efficient & cool running, smooth operation and extended life. It is recommended that this air compressor is fitted with heavy-duty anti vibration floor mountings. Displacement 14CFM - cast iron, twin cylinder compressor pump. Air Receiver liter, (22 Gal) CE Certified. Motor 3 hp, 230v, 1 ph (Continuously rated with overload protection). Working Pressure bar (150 Psi) controlled by a fully automatic pressure switch. Specification also includes safety valve, pressure gauge, air outlet valve and drain tap. Applications - professional and automotive/industrial.

3 Air Compressor 2HP Clarke Industrial 50L (230V) PEV11C50 A robust & portable, heavy duty Air compressor built for performance and reliability. Slow running belt driven air compressor designed with commercial, automotive and industry users in mind. It offers both power and compressed air capacity to power many often used air tools, and satisfy the compressed air requirements of garages, factories, workshops and farms. The pump itself has an aerodynamically bladed flywheel for efficient cooling, positive splash-feed lubrication and cast iron cylinder - all features that promote smooth-running operation and extended service life. Also rubber tires, strong wheels and a sturdy handle make this compressor easily portable as well. Displacement - 9CFM, (single cylinder cast iron pump) Air Receiver Tank - 50 liter (11 Gal), CE certified Motor - 2hp, 230v, single phase Max Working Pressure Bar (150 psi) controlled by a fully automatic pressure switch. Specification also includes safety valve, pressure gauge, air outlet, valve & drain tap. Application professional automotive/industrial Dimensions (LWH) 935x415x885mm. Weight kg (145Lbs) Ideal for powering all commonly used air tools and Spray guns,

4 Air Compressor 3HP Clarke Raider 50L (230V) A powerful V-Twin direct drive air compressor. Suitable for workshop and DIY applications such as spraying (paint, varnish, preservatives etc.), nailing, stapling, polishing, sanding and garage use. Fully automatic on /off control - Fitted with safety valve and pressure regulator with gauge for controlled air pressure Motor: 230V - 3hp, 50Hz Air Receiver: 50 Litre (11 Gal) Air Displacement: 14.5cfm Maximum Operating Pressure: 8bar (11 psi) Portability: Wheel Mounted Dimensions (LWH): 725x410x715mm Weight: 45.1kg (99Lbs)

5 Air Compressor 2.5HP Clarke Warrior 55 50L (230V) A great value compressor with large 9cfm air displacement and a powerful 2.5hp motor with thermal overload protection. Suitable for most DIY & semi-professional uses, it includes fully automatic stop/start control and fitted regulator with gauge for controlled air pressure. Motor: 230V 2.5hp, 50Hz (Thermal overload Protection) Air Receiver: 50 Litre (11 Gal) Air Displacement: 9cfm Maximum Operating Pressure: 10bar (145 psi) Portability: Wheel Mounted with Handle Dimensions (LWH): 720 x 30 x 593 mm Weight: 2.7kg, (59 Lbs.) Agents - Shepherds trading Old Montrose Kingstown St. Vincent & the Grenadines

6 Air Compressor 2HP Clarke Ranger 24L (230V) Great value compressor suitable for DIY and trade applications. Use for spraying (automotive bodywork, fences, sheds etc ), nailing/stapling, cleaning etc. Ideal for powering spray guns, air tools and a wide range of airline accessories for inflating, blowing, cleaning etc. this compressor is fully automatic on/off control - Fitted with safety valve and pressure regulator with gauge for controlled air pressure Motor: 230V - 2hp, 50Hz Air Receiver 24 Liter, (5.25 Gal) Air Displacement 7.5cfm Maximum Working Pressure 8bar (11 psi) Portability: Wheel Mounted Dimensions (LWH): 545 x 310 x 590mm Weight: 24kg, (53 Lbs)

7 Air Compressor Kit Clarke Bandit 8L (230V) The Bandit IV 8 liter portable compressor is ideal for DIY and trade applications such as decking, carpentry, flooring, fencing, paneling, craftwork etc. thanks to its impressive 8 liter capacity, 4.5cfm air displacement and 8bar maximum working pressure. This compact compressor is also ideal for paint spraying, tire inflation, blowing etc. This great value kit comes complete with not only the quality Bandit IV compressor; it's also supplied with a lightweight, high performance and easy to use Air nailer / stapler, perfect for a wide range of applications. The kit also provides users with a recoil hose, fittings and a starter pack of nails and staples, to get you going straight out of the packaging. Motor: 750W - 230V Compressor Automatic On/Off Control - Air Pressure Regulator Air Receiver Capacity - 8 Liter, (1.75 Gal) Air Displacement - 4.5cfm Working Pressure - 8bar, (11 psi) Complete with Air Nailer / Stapler Kit, recoil hose and fittings and starter pack of nails and staples Air gun capacity: 18 gauge nails up to 50mm & type 90 narrow crown staples up to 40mm Dimensions: 40x225x450mm (Compressor) 254x55x253mm (Gun) Weight: 17.4kg, (38 Lbs)

8 Spray guns Air-Tool Lubricant Air Hoses Blo-Guns Inflators Fittings Air Filters Air-Line Lubricators Compressor Parts Push-Connect Fittings & Lines Regulators Air Guages

9 Tech Support Genuine Parts IN STOCK Up to 1 Yr After Sale Support Service & Repair techsupport@shepherdstrading.com

10 Tell: Air Compressors & Fittings & Supplies Shepherds Trading Old Montrose Kingstown St. Vincent & the Grenadines