Cutting ring couplings to ISO /DIN 2353
|
|
- Gillian Cross
- 7 years ago
- Views:
Transcription
1 Cutting ring couplings to IO /DIN 2353
2 Applications Couplings to IO /DIN 2353 With more than 50 years experience in the manufacture of hydraulic fittings, egris offers a comprehensive range of high quality DIN couplings. The egris range of products and services meets most high pressure requirements, combining both mobile (transport, public works, agricultural equipment) and stationary applications (automotive process, chemical industry, steel industry) enabling egris to have high profile customers in many fields of activity. The egris approach to product design and manufacture incorporates total quality control. This policy of high quality results in product homologations that comply with international standards (DIN ) and certifications from the largest official organizations. 18 By actively listening to its customers, egris offers solutions that meet the end users requirements through continuous product development and innovation. Thus, the DiNova ring, launched in 2004, provides safe connection and long lasting sealing on installations resulting in clean equipment and safe working environments. Furthermore, the Dinova connection technology is protected by several international patents. Principle Couplings to IO /DIN 2353 comprise a body, a cutting ring and a tightening nut. Body Cutting ring Nut Tube
3 Principal advantages A wide range of products offering solutions for all applications with : - couplings with 24 sealing cone and O-ring : for guaranteed optimum sealing on high pressure applications, allowing simple and repetitive assembly without loss of sealing performance since, if necessary, the O-ring seal can be easily replaced. - couplings with assembled cutting ring : for extreme conditions of use at high temperatures or with aggressive fluids - weld couplings : for the most severe hydraulic applications (whip-lash, excessive vibration ) /37 bulkhead couplings : for a direct switch from cutting ring technology to 37 design. DiNova ring tandard ring 19 Nut Weld nipple Tube Body Cone Adaptor Hose end connector Flexible hose
4 Principal advantages "Elbows and tees" solutions suitable for use in restricted space adjustable couplings : designed for medium and high pressures adjustable couplings with lock-nut : the best compromise for use in reduced spaces and for resistance to low and medium pressures. 20 banjos : characterized by their compactness. 3 models depending on the working pressure and pressure loss: - standard pressure: Pb maxi = bar - high pressure : Pb maxi = bar - full flow : low pressure drop is guaranteed Easy installation : the method of installing the egris DIN range is well suited for series production (using a pre crimping machine), maintenance operations or individual unit assembly (direct manual installation). Resistance to high nominal pressures : DIN couplings are an optimized solution for different working pressures. 3 series of couplings (, and ) are offered : - for low pressures (up to 100 bar) and 4 to 12 mm o.d. tube. Example: lubrication, braking systems. - for medium pressures (up to bar) and 6 to 42 mm o.d. tube. Example: machine tools, agricultural equipment. - for high pressures (up to 630 bar) and 6 to 38 mm o.d. tube. Example: hydraulic presses, public works equipment In addition, three cutting ring designs are available, offering maximum performance dependant upon the constraints of each specific installation.
5 Cutting rings The DiNova ring Designed to ensure total safety and long lasting sealing, the DiNova cutting ring guarantees clean equipment and safe working conditions. This solution reduces maintenance operations and is designed for all mobile and stationary applications when used with couplings series and. Metal/metal sealing reinforced by 2 PTFE seals : the geometry of the seal cavity prevents distortion and guarantees resistance to vibration. Protection of the seal is ensured throughout assembly - it will not compress until final crimping has been achieved (egris patent). The PTFE seal material allows repeated assembly without any deterioration in performance over time. It is resistant to most aggressive fluids and to a wide range of temperatures (-40 c to +200 c). Reliable and easy assembly : a mechanical stop clearly indicates the crimp position and avoids the risk of insufficient tightening or over-tightening. afe connection : three bites ensure more precise assembly and less tube distortion, thus reinforcing the safety of connection, even in extreme conditions of use. The DiNova ring guarantees resistance to strong vibrations, thanks to an increased area of interface with the tube upon tightening and the seal position within the assembly. 21 The double-bite cutting ring The double-bite ring constitutes an excellent solution for numerous hydraulic applications and can be used with coupling series and. - Easy assembly and excellent sealing performance. - The geometry of the ring prevents distortion of the tube, if overtightened. - Thermal treatment guarantees resistance to vibrations and to shocks and enables repeated assembly without replacing the cutting ring. The single-bite cutting ring The single-bite cutting ring is suitable for coupling series. Its low tightening torque enables easy use and prevents distortion of the tube.
6 the product offer rings, nuts single-bite double-bite DiNova nut 26 male stud couplings elastomer seal O-ring seal sealing bite 8205 taper 28 tube-tube couplings straight couplings straight reducer couplings equal elbows equal tees reducer tee couplings equal crosses 8216 bulkhead straight couplings 8212 bulkhead equal elbows adjustable couplings 22 with 24 sealing cone and O-ring elbows 45 elbows tees 8273 run tees with pre-assembled ring elbows tees run tees with threaded fitting, 24 cone and O-ring elbows tees run tees with threaded fitting, 24 cone and sealing edge elbows tees run tees With O-ring and lock nut elbows tees run tees banjo couplings banjo couplings high pressure banjo couplings chock-free banjo couplings 8229 high pressure double banjo couplings 8239 chock-free double banjo couplings
7 the product offer non adjustable couplings taper elbows parallel elbows tees run tees square head flange couplings square AE 3000 psi AE 6000 psi straight couplings elbows straight couplings elbows straight couplings elbows 85 butt weld couplings nipples 85 straight couplings 8232 elbows bulkhead straight weld couplings adaptors with 24 sealing cone and O-ring adjustable male couplings standpipe reducers reducer adaptors 8506 adjustable straight couplings with pre-assembled ring adjustable male with seal adjustable male with sealing bite 8245 adjustable male taper 8240 reducer adaptors /37 (DIN 3949) nuts flare sleeves intermediate cones 8434 complete adaptors (IO )/BP stud adaptor with pre-assembled ring stud adaptor
8 the product offer M/F reducers/increasers and female thread adaptors reducer with seal reducer with seal increaser with seal reducer with sealing bite reducer with sealing bite increaser with sealing bite 8214 female thread adaptors standpipe couplings for pressure gauge connection standpipe couplings adjustable standpipe couplings female thread adaptors plugs plugs with O-ring plugs with elastomer seal plugs for 24 cone plugs for tubes component parts 8V W00 8W01 8W02 8W03 lock nuts ferrules O-rings captive seals seal rings composite seals
9 Find easily the DIN product that you require Couplings to IO /DIN 2353 Body only Assembled couplings equipped with different rings Product pictures and technical drawings Product description Type of thread Nominal pressure 25 eries eries o.d. of tube Dimensions Thread Bell part numbers Weight egris part numbers
10 Cutting rings 26 PN ØD C ingle-bite Double-bite DiNova Bell code Bell code 1 ring ring ring Bell code 2 4 M8x1 8124E /4 6 0,001 5 M10x1 8124E /5 7 0, M10x1 8124E /6 7 0,001 8 M12x1 8124E /8 7 0, M14x1 8124E /10 7 0, M16x1 8124E /12 7,5 0,002 6 M12x1, /6 9,5 0, /6 9,7 0,002 8 M14x1, /8 10 0, /8 10,2 0, M16x1, /10 10,5 0, /10 10,6 0, M18x1, /12 10,5 0, /12 10,6 0, M22x1, /15 10,5 0, /15 10,8 0, M26x1, /18 10,5 0, /18 11,1 0, M30x / , /22 12,3 0, M36x / , /28 12,1 0, M45x /35 13,5 0, /35 14,3 0, M52x /42 13,5 0, /42 14,3 0,028 6 M14x1, /6 9,5 0, /6 9,7 0,002 8 M16x1, /8 10 0, /8 10,2 0, M18x1, /10 10,5 0, /10 10,6 0, M20x1, /12 10,5 0, /12 10,6 0, M22x1, /14 10,5 0, /14 10,8 0, M24x1, /16 10,5 0, / , M30x / , /20 13,6 0, M36x /25 13,5 0, /25 14,6 0, M42x /30 13,5 0, /30 14,6 0, M52x /38 13,5 0, /38 15,1 0,028 The DiNova ring guarantees: long lasting sealing for safe, clean equipment reliable and easy assembly safe connection
11 Nuts 100 PN ØD C Bell code F H M8x1 8010E / ,004 5 M10x1 8010E / ,5 0,006 6 M10x1 8010E / ,5 0,006 8 M12x1 8010E / , M14x1 8010E / ,5 0, M16x1 8010E / ,012 6 M12x1, / ,5 0,010 8 M14x1, / ,5 0, M16x1, / ,5 0, M18x1, / ,5 0, M22x1, / , M26x1, / , M30x / , M36x / , M45x / , M52x / ,216 6 M14x1, / ,5 0,016 8 M16x1, / ,5 0, M18x1, / ,5 0, M20x1, / ,5 0, M22x1, / ,5 0, M24x1, / ,5 0, M30x / , M36x / , M42x / , M52x / ,5 0,310 27
12 Male stud couplings BP parallel elastomer seal IO PN ØD C body double-bite DiNova only ring ring Bell code E F1 F2 G G1/ Z15-01/6RD ,9 23 8,5 0,025 6 G1/ Z15-01/6RD1/4" ,9 24,5 10 0,040 8 G1/ Z15-01/8RD1/8" ,9 24,5 9,5 0,033 8 G1/ Z15-01/8RD , ,045 8 G3/ Z15-01/8RD3/8" , ,5 0,061 8 G1/ Z15-01/8RD1/2" , , G1/ Z15-01/10RD , , G3/ Z15-01/10RD3/8" ,9 27,5 12,5 0, G1/ Z15-01/10RD1/2" ,9 27,5 13 0, G1/ Z15-01/12RD1/4" ,9 25,5 11 0, G3/ Z15-01/12RD , ,5 0, G1/ Z15-01/12RD1/2" ,9 27,5 13 0, G3/ Z15-01/12RD3/4" ,9 28,5 14 0, G3/ Z15-01/15RD3/8" ,9 28,5 13,5 0, G1/ Z15-01/15RD , , G3/ Z15-01/15RD3/4" , , G1/ Z15-01/18RD , ,5 0, G3/ Z15-01/18RD3/4" , ,5 0, G1/ Z15-01/22RD1/2" ,9 32,5 16,5 0, G3/ Z15-01/22RD ,9 33,5 16,5 0, G Z15-01/22RD1" , ,5 0, G3/ Z15-01/28RD3/4" , ,5 0, G1 1/ Z15-01/28RD , ,5 0, G1 1/ Z15-01/28RD1 1/4" , ,5 0, G Z15-01/35RD1" , ,5 0, 35 G1 1/ Z15-01/35RD , ,5 0, G1 1/ Z15-01/42RD , ,456 6 G1/ Z15-01/6RD , ,050 8 G1/ Z15-01/8RD , ,055 8 G3/ Z15-01/8RD3/8" ,9 30,5 15,5 0, G Z15-01/10RD1/4" ,9 30,5 14,5 0, G3/ Z15-01/10RD , , G1/ Z15-01/10RD1/2" ,9 33,5 17,5 0, G1/ Z15-01/12RD1/4" ,9 32,5 16,5 0, G3/ Z15-01/12RD , , G1/ Z15-01/12RD1/2" ,9 33,5 17,5 0, G1/ Z15-01/14RD , , G3/ Z15-01/16RD3/8" ,9 36,5 18 0, G1/ Z15-01/16RD , ,5 0, G3/ Z15-01/16RD3/4" , ,5 0, G1/ Z15-01/20RD1/2" , ,5 0, G3/ Z15-01/20RD , ,5 0, G Z15-01/20RD1" , ,5 0, G3/ Z15-01/25RD3/4" , , G Z15-01/25RD , , G Z15-01/30RD1" , ,5 0, G1 1/ Z15-01/30RD , ,5 0, G1 1/ Z15-01/38RD1 1/4" , , G1 1/ Z15-01/38RD , ,
13 Male stud couplings metric parallel elastomer seal IO PN ØD C body double-bite DiNova only ring ring Bell code E F1 F2 G M10x Z15-01/6MD ,9 23 8,5 0,025 8 M10x Z15-01/8MD10X ,9 24 9,5 0,040 8 M12x1, Z15-01/8MD , ,040 8 M14x1, Z15-01/8MD14X1, , ,048 8 M16x1, Z15-01/8MD16X1, ,9 26,5 11,5 0,060 8 M18x1, Z15-01/8MD18X1, ,9 26,5 11,5 0, M12x1, Z15-01/10MD12X1, , , M14x1, Z15-01/10MD , , M16x1, Z15-01/10MD16X1, ,9 27,5 12,5 0, M18x1, Z15-01/10MD18X1, ,9 27,5 12,5 0, M22x1, Z15-01/10MD22X1, , , M14x1, Z15-01/12MD14X1, , ,5 0, M16x1, Z15-01/12MD , ,5 0, M18x1, Z15-01/12MD18X1, , ,5 0, M22x1, Z15-01/12MD22X1, ,9 28,5 14 0, M16x1, Z15-01/15MD16X1, , ,5 0, M18x1, Z15-01/15MD , ,5 0, M22x1, Z15-01/15MD22X1, ,9 30,5 15 0, M18x1, Z15-01/18MD18X1, , ,5 0, M22x1, Z15-01/18MD , ,5 0, M22x1, Z15-01/22MD22X1, , ,5 0, M26x1, Z15-01/22MD , ,5 0, M33x Z15-01/28MD , ,5 0, M42x Z15-01/35MD , ,5 0, M48x Z15-01/42MD , ,456 6 M12x1, Z15-01/6MD , ,045 8 M14x1, Z15-01/8MD , , M16x1, Z15-01/10MD , , M18x1, Z15-01/12MD , , M20x1, Z15-01/14MD , , M22x1, Z15-01/16MD , ,5 0, M27x Z15-01/20MD , ,5 0, M33x Z15-01/25MD , , M42x Z15-01/30MD , ,5 0, M48x Z15-01/38MD , , Bell code These part numbers are provided as a general guide and correspond to double-bite ring models.
14 Male stud couplings metric parallel O-ring IO PN ØD C Body Double-bite DiNova only ring ring Bell code E F1 F2 G O-ring M10X Z15-01/6MO 8, ,8 8,1x1,6 23 8,5 0,025 8 M12X1, Z15-01/8MO ,8 9,3x2,2 24,5 10 0, M14X1, Z15-01/10MO ,8 11,3x2,2 25,5 11 0, M16X1, Z15-01/12MO 11, ,8 13,3x2, ,5 0, M18X1, Z15-01/15MO 12, ,8 15,3x2,2 28,5 13,5 0, M22X1, Z15-01/18MO ,8 19,3x2,2 30,5 14,5 0, M27X2* Z15-01/22MO ,8 23,6x2,9 32,5 16,5 0, M33X Z15-01/28MO ,8 29,6x2, ,5 0, M42X Z15-01/35MO ,8 38,6x2, ,5 0, M48X Z15-01/42MO 17, ,8 44,6x2,9 41,5 19 0,456 6 M12X1, Z15-01/6MO ,8 9,3x2,2 27,5 13 0,045 8 M14X1, Z15-01/8MO ,8 11,3x2,2 29,5 15 0, M16X1, Z15-01/10MO 12, ,8 13,3x2, , M18X1, Z15-01/12MO ,8 15,3x2, , M20X1, Z15-01/14MO ,8 17,3x2,2 36,5 19 0, M22X1, Z15-01/16MO ,8 19,3x2, ,5 0, M27X Z15-01/20MO 18, ,8 23,6x2, ,5 0, M33X Z15-01/25MO 18, ,8 29,6x2, , M42X Z15-01/30MO ,8 38,6x2, ,5 0, M48X Z15-01/38MO 21, ,8 44,6x2,9 56,5 26 0,889 * according to DIN 3852 part 3 = M26x1.5
15 Male stud couplings UN/UNF O-ring IO /3 PN ØD C Body Double-bite DiNova only ring ring Bell code E F1 F2 G 1 2 O-ring 6 7/16"-20UNF Z15-01/6-7/16"-20UNF ,5 8,92x1,83 0, /16"-18UNF Z15-01/6-9/16"-18UNF , ,89x1,98 0, /16"-20UNF Z15-01/8-7/16"-20UNF ,92x1,83 0, /2"-20UNF Z15-01/8-1/2"-20UNF ,52x1,83 0, /16"-18UNF Z15-01/8-9/16"-18UNF , ,89x1,98 0, /16"-20UNF Z15-01/10-7/16"-20UNF ,92x1,83 0, /16"-18UNF Z15-01/10-9/16"-18UNF , ,89x1,98 0, /4"-16UNF Z15-01/10-3/4"-16UNF , ,36x2,2 0, /16"-18UNF Z15-01/12-9/16"-18UNF , ,89x1,98 0, /4"-16UNF Z15-01/12-3/4"-16UNF , ,36x2,2 0, /8"-14UNF Z15-01/12-7/8"-14UNF 12, , ,3 19,18x2,46 0, /4"-16UNF Z15-01/15-3/4"-16UNF , ,36x2,2 0, /8"-14UNF Z15-01/15-7/8"-14UNF 12, ,5 30,5 15,5 19,18x2,46 0, /4"-16UNF Z15-01/18-3/4"-16UNF , ,5 16,36x2,2 0, /8"-14UNF Z15-01/18-7/8"-14UNF 12, , ,8 19,18x2,46 0, /8"-14UNF Z15-01/22-7/8"-14UNF 12, , ,8 19,18x2,46 0, /16"-12UN Z15-01/22-1 1/16"-12UN , ,5 23,47x2,95 0, /16"-12UN Z15-01/22-1 5/16"-12UN , ,5 29,74x2,95 0, /16"-12UN Z15-01/28-1 1/16"-12UN , ,5 23,47x2,95 0, /16"-12UN Z15-01/28-1 5/16"-12UN , ,5 29,74x2,95 0, 35 15/16"-12UN Z15-01/35-1 5/16"-12UN , ,5 29,74x2,95 0, /8"-12UN Z15-01/35-1 5/8"-12UN ,5 37,47x3 0, 42 15/8"-12UN Z15-01/42-1 5/8"-12UN ,47x3 0, /8"-12UN Z15-01/42-1 7/8"-12UN ,69x3 0, /16"-20UN Z15-01/6-7/16"-20UNF ,92x1,83 0, /16"-20UNF Z15-01/8-7/16"-20UNF ,92x1,83 0, /16"-18UNF Z15-01/10-9/16"-18UNF , ,5 11,98x1,98 0, /16"-18UNF Z15-01/12-9/16"-18UNF , ,5 11,98x1,98 0, /4"-16UNF Z15-01/14-3/4"-16UNF , ,36x2,2 0, /8"-14UNF Z15-01/16-7/8"-14UNF 12, , ,8 19,18x2,46 0, /8"-14UNF Z15-01/20-7/8"-14UNF 12, , ,8 19,18x2,46 0, /16"-12UN Z15-01/20-1 1/16"-12UN , ,5 23,47x2,95 0, /16"-12UN Z15-01/25-1 1/16"-12UN , ,47x2,95 0, /16"-12UN Z15-01/25-1 5/16"-12UN , ,74x2,95 0, /16"-12UN Z15-01/30-1 5/16"-12UN , ,5 29,74x2,95 0, /8"-12UN Z15-01/30-1 5/8"-12UN ,5 37,47x3 0, /8"-12UN Z15-01/38-1 5/8"-12UN ,47x3 0,852 31
16 Male stud couplings BP parallel sealing bite IO G 32 PN ØD C Body ingle-bite Double-bite only ring ring Bell code E F1 F2 G G1/8 8001E E /6RB ,018 8 G1/8 8001E E /8RB ,020 6 G1/ Z15-01/6RB ,5 0,025 6 G1/ Z15-01/6RB1/4" ,040 6 G3/ Z15-01/6RB3/8" ,5 0,047 8 G1/ Z15-01/8RB1/8" ,5 9,5 0,034 8 G1/ Z15-01/8RB ,045 8 G3/ Z15-01/8RB3/8" ,5 11,5 0,062 8 G1/ Z15-01/8RB1/2" , G1/ Z15-01/10RB1/8" , G1/ Z15-01/10RB , G3/ Z15-01/10RB3/8" ,5 12,5 0, G1/ Z15-01/10RB1/2" , G1/ Z15-01/12RB1/4" , G3/ Z15-01/12RB ,5 12,5 0, G1/ Z15-01/12RB1/2" , G3/ Z15-01/12RB3/4" , G1/ Z15-01/15RB1/4" ,5 13 0, G3/ Z15-01/15RB3/8" ,5 0, G1/ Z15-01/15RB ,5 14 0, G3/ Z15-01/15RB3/4" ,5 15 0, G3/ Z15-01/18RB3/8" ,5 14 0, G1/ Z15-01/18RB ,5 0, G3/ Z15-01/18RB3/4" ,5 0, G1/ Z15-01/22RB1/2" ,5 0, G3/ Z15-01/22RB ,5 0, G Z15-01/22RB1" ,5 0, G3/ Z15-01/28RB3/4" ,5 0, G Z15-01/28RB ,5 0, G Z15-01/35RB1" ,5 0, G1 1/ Z15-01/35RB ,5 0, G1 1/ Z15-01/42RB1 1/4" , G1 1/ Z15-01/42RB ,
17 Male stud couplings BP parallel sealing bite IO G PN ØD C Body Double-bite only ring Bell code E F1 F2 G G1/ Z15-01/6RB ,050 8 G1/ Z15-01/8RB ,055 8 G3/ Z15-01/8RB3/8" ,5 15,5 0, G1/ Z15-01/10RB1/4" ,5 14,5 0, G3/ Z15-01/10RB , G1/2 PB 630* Z15-01/10RB1/2" ,5 17,5 0, G1/ Z15-01/12RB1/4" ,5 16,5 0, G3/ Z15-01/12RB , G1/ Z15-01/12RB1/2" ,5 17,5 0, G3/ Z15-01/12RB3/4" ,5 19,5 0, G3/ Z15-01/14RB3/8" ,5 18,5 0, G1/ Z15-01/14RB , G3/ Z15-01/16RB3/8" ,5 18 0, G1/ Z15-01/16RB ,5 0, G3/ Z15-01/16RB3/4" ,5 0, G1/ Z15-01/20RB1/2" ,5 0, G3/ Z15-01/20RB ,5 0, G Z15-01/20RB1" ,5 0, G3/ Z15-01/25RB3/4" , G Z15-01/25RB , G Z15-01/30RB1" ,5 0, G1 1/ Z15-01/30RB ,5 0, G1 1/ Z15-01/38RB1 1/4" , G1 1/ Z15-01/38RB ,889 * afety factor 3. 33
18 Male stud couplings metric parallel sealing bite IO G 34 PN ØD C Body Double-bite only ring Bell code E F1 F2 G M10x Z15-01/6MB ,5 0,025 8 M12x1, Z15-01/8MB ,040 8 M14x1, Z15-01/8MB14X1, ,048 8 M16x1, Z15-01/8MB16X1, ,5 11,5 0,058 8 M18x1, Z15-01/8MB18X1, ,5 11,5 0, M12x1, Z15-01/10MB12X1, , M14x1, Z15-01/10MB , M16x1, Z15-01/10MB16X1, ,5 12,5 0, M18x1, Z15-01/10MB18X1, ,5 12,5 0, M22x1, Z15-01/10MB22X1, , M14x1, Z15-01/12MB14X1, ,5 0, M16x1, Z15-01/12MB ,5 0, M18x1, Z15-01/12MB18X1, ,5 0, M22x1, Z15-01/12MB22X1, ,5 14 0, M16x1, Z15-01/15MB16X1, ,5 0, M18x1, Z15-01/15MB ,5 0, M22x1, Z15-01/15MB22X1, , M18x1, Z15-01/18MB18X1, ,5 0, M22x1, Z15-01/18MB ,5 0, M22x1, Z15-01/22MB22X1, ,5 0, M26x1, Z15-01/22MB ,5 0, M33x Z15-01/28MB ,5 0, M42x Z15-01/35MB ,5 0, M48x Z15-01/42MB ,456 6 M12x1, Z15-01/6MB ,045 8 M14x1, Z15-01/8MB ,055 PB 630* 10 M16x1, Z15-01/10MB , M18x1, Z15-01/12MB , M22x1, Z15-01/12MB22X1, ,5 17,5 0, M20x1, Z15-01/14MB , M18x1, Z15-010/16MB18X1, ,5 0, M22x1, Z15-01/16MB ,5 0, M27x Z15-01/20MB ,5 0, M33x Z15-01/25MB , M42x Z15-01/30MB ,5 0, M48x Z15-01/38MB ,889 * afety factor 3.
19 Male stud couplings metric taper and BP taper DIN 3852 form C PN ØD C Body ingle-bite Double-bite only ring ring Bell code E F1 F M8x1 8005E E /4MK ,014 5 M8x1 8005E E /5MK ,5 0,015 6 M6x1 8005E E /6MK6x ,5 0,020 6 M8x1 8005E E /6M8x ,5 0,020 6 M10x1 8005E E /6MK ,5 0,016 8 M10x1 8005E E /8MK ,5 0,018 4 R1/8 8005E E /4RK ,015 5 R1/8 8005E E /5RK ,5 0,015 6 R1/8 8005E E /6RK ,5 0,016 8 R1/8 8005E E /8RK ,5 0, R1/4 8005E E /10RK ,5 0, R1/4 8005E E /12RK ,040 6 R1/ Z15-01/6RK ,025 6 R1/ Z15-01/6RK1/4" ,5 20 0,032 8 R1/ Z15-01/8RK1/8" ,032 8 R1/ Z15-01/8RK ,040 8 R3/ Z15-01/8RK3/8" , R1/ Z15-01/10RK , R3/ Z15-01/10RK3/8" , R1/ Z15-01/10RK1/2" , R1/ Z15-01/12RK1/4" , R3/ Z15-01/12RK , R1/ Z15-01/12RK1/2" , R3/ Z15-01/15RK3/8" ,5 23 0, R1/ Z15-01/15RK , R1/ Z15-01/18RK ,5 0, R3/ Z15-01/22RK ,5 0,
20 Male stud couplings NPT 36 PN ØD C Body ingle-bite Double-bite only ring ring Bell code E F1 F /8 8005E E04 11 Z15-01/4NPT 9, , /8 8005E E06 11 Z15-01/6NPT 9, ,5 0, /8 8005E E08 11 Z15-01/8NPT 9, ,5 0, / Z15-01/6NPT 9, , / Z15-01/6NPT1/4" 15, , / Z15-01/8NPT 15, , / Z15-01/10NPT 15, , / Z15-01/10NPT3/8" 15, , / Z15-01/12NPT1/4" 15, ,5 25 0, / Z15-01/12NPT 15, ,5 25 0, / Z15-01/12NPT1/2" 19, ,5 30 0, / Z15-01/15NPT 19, ,5 31 0, / Z15-01/18NPT 19, ,5 0, / Z15-01/22NPT 20, ,5 0, Z15-01/28NPT ,5 0, / Z15-01/35NPT 25, ,5 0, / Z15-01/42NPT 26, , / Z15-01/6NPT 15, , / Z15-01/8NPT 15, , / Z15-01/10NPT1/4" 15, ,5 27,5 0, / Z15-01/10NPT 15, ,5 27,5 0, / Z15-01/12NPT 15, ,5 0, / Z15-01/12NPT1/2" 19, ,5 0, / Z15-01/14NPT 19, , / Z15-01/16NPT 19, ,5 0, / Z15-01/20NPT 20, ,5 0, Z15-01/25NPT , / Z15-01/30NPT 25, ,5 0, / Z15-01/38NPT 26, ,
21 traight couplings PN ØD Body ingle-bite Double-bite DiNova only ring ring ring Bell code F1 F E E / , E E / , E E / , E E / , E E / , E E / , Z15-10/ , Z15-10/ , Z15-10/ , Z15-10/ , Z15-10/ , Z15-10/ , Z15-10/ , Z15-10/ , Z15-10/ , Z15-10/ , Z15-10/ , Z15-10/ , Z15-10/ , Z15-10/ , Z15-10/ , Z15-10/ , Z15-10/ , Z15-10/ , Z15-10/ , Z15-10/ ,194 37
22 traight reducing couplings 38 PN ØD1 ØD2 Body ingle-bite Double-bite DiNova only ring ring ring Bell code F1 F2 F E E / ,5 10,5 0, E E / ,5 12,5 0, E E / , Z15-14/ , Z15-14/ , Z15-14/ , Z15-14/ , Z15-14/ , Z15-14/ , Z15-14/ ,5 14 0, Z15-14/ ,5 14 0, Z15-14/ ,5 15 0, Z15-14/ ,5 15 0, Z15-14/ ,5 0, Z15-14/ ,5 0, Z15-14/ ,5 0, Z15-14/ ,5 16,5 0, Z15-14/ ,5 0, Z15-14/ ,5 18,5 0, Z15-14/ , Z15-14/ ,5 0, Z15-14/ ,5 19 0, Z15-14/ ,5 21 0, Z15-14/ ,5 21 0, Z15-14/ , Z15-14/ , Z15-14/ ,5 0, Z15-14/ ,5 0, Z15-14/ ,5 0, Z15-14/ ,5 0, Z15-14/ , Z15-14/ ,5 0, Z15-14/ ,5 0, Z15-14/ , Z15-14/ , Z15-14/ ,5 0, Z15-14/ ,5 22 0, Z15-14/ ,5 26 0, Z15-14/ ,5 23,5 0, Z15-14/ ,5 23 0, Z15-14/ ,5 25,5 0, Z15-14/ ,5 0, Z15-14/ , Z15-14/ ,5 0, Z15-14/ ,5 29,5 1,088 Other dimensions are available upon request.
23 Equal elbows PN ØD Body ingle-bite Double-bite DiNova only ring ring ring Bell code F1* F E E / , E E / ,5 0, E E / ,5 0, E E / ,5 0, E E / , Z15-11/ , Z15-11/ , Z15-11/ , Z15-11/ , Z15-11/ , Z15-11/ ,5 0, Z15-11/ ,5 0, Z15-11/ ,5 0, Z15-11/ ,5 0, Z15-11/ , Z15-11/ , Z15-11/ , Z15-11/ ,5 0, Z15-11/ ,5 0, Z15-11/ , Z15-11/ ,5 0, Z15-11/ ,5 0, Z15-11/ , Z15-11/ ,5 0, Z15-11/ ,318 * Models ØD 4 to 10mm are manufactured from profile steel Models ØD > 10mm are manufactured from forged steel 39
24 Equal tees 40 PN ØD Body ingle-bite Double-bite DiNova only ring ring ring Bell code F1* F E E / , E E / ,5 0, E E / ,5 0, Z15-12/ , Z15-12/ , Z15-12/ , Z15-12/ , Z15-12/ , Z15-12/ ,5 0, Z15-12/ ,5 0, Z15-12/ ,5 0, Z15-12/ ,5 0, Z15-12/ , Z15-12/ , Z15-12/ , Z15-12/ ,5 0, Z15-12/ ,5 0, Z15-12/ , Z15-12/ ,5 0, Z15-12/ ,5 0, Z15-12/ , Z15-12/ ,5 1, Z15-12/ ,027 * Models ØD 4 to 10mm are manufactured from profile steel Models ØD > 10mm are manufactured from forged steel
25 Reducing tee couplings PN ØD1 ØD2 ØD3 Body Double-bite DiNova only ring ring Bell code F1* F2 F3 F Z15-16/ , Z15-16/ , Z15-16/ , Z15-16/ , Z15-16/ , Z15-16/ , Z15-16/ , Z15-16/ , Z15-16/ , Z15-16/ , Z15-16/ , Z15-16/ , Z15-16/ , Z15-16/ ,5 0, Z15-16/ , , , Z15-16/ , , , Z15-16/ , , , Z15-16/ , , , Z15-16/ , , , Z15-16/ , , ,5 0, Z15-16/ , , , Z15-16/ , , , Z15-16/ , , , Z15-16/ , , ,5 0, Z15-16/ , , ,5 0, Z15-16/ , , ,5 0,360 * Models ØD 4 to 10mm are manufactured from profile steel Models ØD > 10mm are manufactured from forged steel 41 Other dimensions are available upon request.
26 Equal crosses 42 PN ØD Body Double-bite DiNova only ring ring Bell code F1 F Z15-13/ , Z15-13/ , Z15-13/ , Z15-13/ , Z15-13/ , Z15-13/ ,5 0, Z15-13/ ,5 0, Z15-13/ ,5 1, Z15-13/ ,5 1, Z15-13/ , Z15-13/ , Z15-13/ , Z15-13/ ,5 0, Z15-13/ ,5 0, Z15-13/ , Z15-13/ ,5 0, Z15-13/ ,5 0, Z15-13/ , Z15-13/ ,5 1, Z15-13/ ,576
27 Bulkhead straight couplings * K = 16 mm max. PN ØD C Body Double-bite DiNova only ring ring Bell code F1 F2 F M12x1,5 8V Z15-22/ ,067 8 M14x1,5 8V Z15-22/ , M16x1,5 8V Z15-22/ , M18x1,5 8V Z15-22/ , M22x1,5 8V Z15-22/ , M26x1,5 8V Z15-22/ , ,5 0, M30x2 8V Z15-22/ , ,5 0, M36x2 8V Z15-22/ , ,5 0, M45x2 8V Z15-22/ , ,5 0, M52x2 8V Z15-22/ ,193 6 M14x1,5 8V Z15-22/ ,096 8 M16x1,5 8V Z15-22/ , M18x1,5 8V Z15-22/ , ,5 0, M20x1,5 8V Z15-22/ , ,5 0, M22x1,5 8V Z15-22/ , M24x1,5 8V Z15-22/ , ,5 0, M30x2 8V Z15-22/ , ,5 0, M36x2 8V Z15-22/ , M42x2 8V Z15-22/ , ,5 1, M52x2 8V Z15-22/ , Bodies only are delivered with lock nut. Bodies only without lock nut are available upon request.
28 Bulkhead elbow couplings 44 * K = 16 mm max. PN ØD C Body Double-bite DiNova only ring ring Bell code F1 F2 F M12x1,5 8V Z15/1-22/ ,067 8 M14x1,5 8V Z15/1-22/ , M16x1,5 8V Z15/1-22/ , M18x1,5 8V Z15/1-22/ , M22x1,5 8V Z15/1-22/ , M26x1,5 8V Z15/1-22/ , ,5 24 0, M30x2 8V Z15/1-22/ , ,5 30 0, M36x2 8V Z15/1-22/ , ,5 34 0, M45x2 8V Z15/1-22/ , ,5 39 0, M52x2 8V Z15/1-22/ ,563 6 M14x1,5 8V Z15/1-22/ ,096 8 M16x1,5 8V Z15/1-22/ , M18x1,5 8V Z15/1-22/ , ,5 20 0, M20x1,5 8V Z15/1-22/ , ,5 21 0, M22x1,5 8V Z15/1-22/ , M24x1,5 8V Z15/1-22/ , ,5 24 0, M30x2 8V Z15/1-22/ , ,5 30 0, M36x2 8V Z15/1-22/ , M42x2 8V Z15/1-22/ , ,5 39 1, M52x2 8V Z15/1-22/ ,758
Hose and Tube Fittings Series 1-3
Embracing Challenge Hose and Tube Fittings Series 1-3 out of plastics PP, PVDF, PTFE Series 1 Special Features Corrosion resistant Gas tight Easy to handle Different connection threads Application Hose
More informationPRODUCT CATALOGUE. burnettandhillman.co.uk &HYDRAULIC ADAPTORS. Burnett & Hillman Havyat Road, Wrington, Bristol BS40 5AE United Kingdom
burnettandhillman.co.uk 2014 HYDRAULIC ADAPTORS Burnett Hillman Havyat Road, Wrington, Bristol BS40 5AE United Kingdom PRODUCT CATALOGUE T: +44 (0)1934 862596 F: +44 (0)1934 862616 E: sales@burnettandhillman.co.uk
More informationNEW SIX-SEALS CUTTING RING. INTERNATIONAL INDUSTRIAL PATENT Nr. 864061 of the 10/03/99 FLANKS AND DOES NOT REPLACE THE STANDARD RING CURRENTLY IN USE
B4 NEW SIX-SEALS CUTTING RING. INTERNATIONAL INDUSTRIAL PATENT Nr. 864061 of the 10/03/99 FLANKS AND DOES NOT REPLACE THE STANDARD RING CURRENTLY IN USE AVAILABLE IN CARBON AND STAINLESS STEEL 23 THEORY
More informationMetric Tube Fittings
Metric Tube Fittings Index Introduction 2 Terms & Conditions 3 Connectors teel 4 tainless teel 22 Tube teel 35 tainless teel 36 Technical ection Assembly Instructions 37-38 Tube pecifications 39-41 Conversion
More informationWorking Pressure up to 630 bar / 9135 PSI
Test Hoses SMS / SS + Working Pressure up to 630 bar / 9135 PSI Technical Data for Test Hose A B C D Nominal Bore () (mm) Max. Working Pressure (PN) (bar / PSI) 00 / 5801 630 / 9135 30 / 931 630 / 9135
More informationWorking Pressure - Hose Ends
Working Pressure - Hose Ends The maximum dynamic working pressure of a hose assembly is the lesser of the rated working pressure of the hose and the end connection used. HIGH SPECIALTY HOSE ACCESSORRIES
More informationFITTINGS 5-01. 82A series Aluminium (light weight) compression fittings Ø 6... 42 mm tube size, BSPP and BSPT thread
FITTINS 82 series luminium (light weight) compression fittings Ø 6... 42 mm tube size, SPP and SPT thread 82 series rass compression fittings Ø 6... 42 mm tube size, SPP and SPT thread 83 series luminium
More informationCajon VCR Fittings. Flanges, Fittings, & Components. Cajon & Swagelok Fittings. Cajon VCR Fittings. Nuts, Caps, & Plugs. Socket Weld Glands
Cajon VCR Fittings Cajon VCR Fittings Make excellent low-pressure gas connections Ideal for lecture bottle gas cylinders, standard helium checks, and general gas plumbing Withstand bakeout to 58º C (with
More informationPipe threads for tubes and fittings where pressure-tight joints are not made on the threads. (requires PTFE sealing tape or liquid sealant).
Fittings for CO 2 Pipe Threads Pipe thread references quoted in this catalogue conform with the requirements specified in the latest issue and amendments of the following ISO Standards: ISO 7-1 (BS21)
More informationTrouble shooting guide
guide DPR/PSR Leak Insuffi ciently tightened, shallow bite Tighten the nut according to correct number of turns, direct assembly only for maintanance/repair, use of recommended pre-assembly machines Mark
More informationThread and End Connection
www.swagelok.com and End Connection Identification Guide 2 Contents Introduction and End Connection Terminology.. 4 General Terminology... 5 Step-by-Step Identification Procedure for s and End Connections...
More informationVe-Lock manufactures Needle Valves from Solid bar stock Materials & all parts details are as below:
Needle Valves : - Needle valves have a slender, tapered point at the end of the valve stem that is lowered through the seat to restrict or block flow. Fluid flowing through the Needle valve turns 90 degrees
More informationTransport & Automotive CATALOGUE. March 2011. Customer Service Phone: 1800 777 299 Fax: 1800 065 321 Email:sales@tubefit.com.au. www.tubefit.com.
Transport & Automotive CATALOGUE Customer Service Phone: 1800 777 299 Fax: 1800 065 321 Email:sales@tubefit.com.au March 2011 www.tubefit.com.au Page 1 4 6 9 12 14 16 17 19 20 22 23 24 26 28 29 31 33 Index
More informationASSEMBLY INSTRUCTIONS ACCORDING TO SAE J1453 FOR FLARED TUBES. 5. Clean properly with appropriate products the part of the tube to be flared.
ASSEMBLY INSTRUCTIONS ACCORDING TO SAE J1453 FOR FLARED TUBES 1. Before to start to flare the tube check for the correct parameters of all the tools to be used and substitute 2. Cut the tube at a 90 angle
More information37 JIC Flare (Nuts) 304C (070112) 306 (070118) 318 (070110) Pg. 22-75-160 Bulkhead Locknut (Use with #2700) Pg. 23 Tube Nut (Use with #319)
37 JIC Flare (Nuts) Components Assembled The 37 JIC (Joint Industrial Council) Flare is a reliable, straight thread, single-flare design that is used world-wide. It is popular in many applications and
More informationParts Manual. TWIN 2 & 3 Parts & Accessories F210846R01. Your efficiency is our Challenge!
Parts Manual TWIN 2 & 3 Parts & Accessories F210846R01 Your efficiency is our Challenge! All rights reserved. No part of this manual may be copied and/or published by means of printing, photocopying, microfilm
More information800-348-8467 www.fittingsunlimited.com
Thread and Port Identification Guide 800-348-8467 www.fittingsunlimited.com INDEX Index... 1 Explanation of Symbols... 2 How to Measure Threads... 3-4 Metric vs English Threads... 5 North American Connections
More informationTemperature Adaptor. Vacuum Tree
Temperature Adaptor Temperature Adaptor Temperature Adaptor B0N Ford XY on 6 cyl B02N Ford XF on 6 cyl B0N Ford XE-XF 6 cyl B0N Ford 20 Eng. Tree of 2 BN Ford 20 Eng. Tree of BP Ford 20 Eng. Tree of Water
More informationPiston Accumulators. SK Series. Accumulator Catalog. Piston Types. Description. Sealing Systems. End Cap. O-ring. Sealing System. Piston.
SK Series Piston Types TYPE 2 pplication: Low-friction design for higher piston speeds, slow movements without stick-slip effect and high number of actuations (millions). ctual cycles achieved will vary
More informationBRAZE PERMANENT FITTING
BRAZE PERMANENT FITTING DESIGN CONCEPT: Airdrome Precision Components, was a licensee of Douglas Aircraft Co. (prior to become Boeing Co.) for manufacturing Cres fittings commencing with DC-10 aircraft,
More informationSTANDARD DOUBLE CUTTING EDGE RING ASSEMBLED ON ALL CAST PRODUCTION ASSURES SEALING AND SAFETY MANUFACTURED IN CARBON AND STAINLESS STEEL
B3 STANDARD DOUBLE CUTTING EDGE RING ASSEMBLED ON ALL CAST PRODUCTION ASSURES SEALING AND SAFETY MANUFACTURED IN CARBON AND STAINLESS STEEL THEORY OF OPERATION The Cast fitting, manufactured according
More informationStainless Steel Single and Dual Circulation Kits
Instruction Sheet P/N 160780 01 Stainless Steel Single and Dual Circulation Kits Introduction The single and dual high-pressure circulation kits allow you to vary and control the circulation rate of coating
More informationwith installation dynafact boost GAUGE this manual is for use with systems 64050-64054
owners manual with installation instructions dynafact boost GAUGE this manual is for use with systems 64050-64054 GENERAL INSTALLATION PRACTICES This manual is an installation guide for all 1. Banks DynaFact
More informationPipe Valves, Fittings and Nipples Pressures to 15,200 psi
Pipe Valves, Fittings and Nipples MAXIMATOR has been designing and manufacturing high pressure equipment for more than thirty years and has a worldwide reputation for quality and reliability, backed by
More informationSERIES ASM NEOPRENE/EPMD FLANGED SINGLE SPHERE CONNECTOR CONNECTORS. Pressures to 225 PSIG (15.51 barg) Temperatures to 230ºF (110ºC)
APPLICATIONS Process Industry Weak Acids Alkalies Compressed Air Pulp & Paper MODELS ASM - Flanged Connection OPTIONS Control Rods Oil & Gas Water & Waste Pump suction & discharge Sea water Chemical lines
More informationSystem Accessories Pricing. Page 0 Effective 7/02
System Accessories Pricing Page 0 Effective 7/02 Firetrace Tubing 200005 Firetrace Detection Tubing (FDT) (Per Foot) (Available in continuous lengths up to 333 ft.) Accessories 400001 400004 400061 400060
More informationkymanual or Automatic - it s your Choice
. kymanual or Automatic - it s your Choice ky LKB Automatic or Manual Butterfly Valve Application LKB is a sanitary automatically or manually operated butterfly valve for use in stainless steel pipe systems.
More informationMetric Hydraulic Compression Tube Fittings
Metric Hydraulic Compression Fittings T A B L E O F C O N T E N T S Introduction Index Pages A to F Pages G to L FITTINGS to Unions Straight Male Connectors Elbow Male Connectors Run Tee Male Connectors
More informationComplete Systems & Parts Automatic Oiler & Grease Bank
MADE IN THE USA Complete Systems & Parts Automatic Oiler & Grease Bank www.gosuburban.com 2 Lubrication Systems Lubrication Systems, a division of Suburban Manufacturing, manufactures a complete line of
More informationUSA Headquarters. Dynex/Rivett Inc. 770 Capitol Drive Pewaukee, WI 53072 U.S.A. Tel: 262-691-2222 FAX: 262-691-0312 E-mail: sales@dynexhydraulics.
SPECIFICATIONS PF1000 Series Fixed Displacement Pumps Also refer to "Checkball Pump Installation and Operating Recommendations" Bulletin PSI.CB (dynexpumpinstallation.pdf) CONTACT INFORMATION USA Headquarters
More informationAutomated Lubrication Systems Parts & Accessories
Automated Lubrication Systems Parts & Accessories (Truck and Trailer) Groeneveld USA, Inc. 2150 S. Central Expy. Suite 200 McKinney, TX 75070 Tel: 800.586.7283 Fax: 330.225.5213 Groeneveld USA, Inc. 2150
More informationFlare Fittings. The World Standard. SAE 45 Flared Fittings... D4. Inverted Flared Fittings... D14. Access Valves... D18
Flare Fittings SAE 45 Flared Fittings... 4 Inverted Flared Fittings... 14 Access Valves... 18 The World Standard Flare Fittings Flare to ale PT 48F ale Connector 481FH ale Connector AVU1 ale Connector
More informationHose Clamps & Fittings
All Stainless Steel Marine or Underground Hose Clamps 5/16 HEX HEAD SCREW 60000 SERIES Highly corrosion resistant Use for marine or underground applications Stainless Steel Band, Housing Plated Steel Screw
More informationHYDRAULIC PIPING STANDARD HANDBOOK. Revision 1
HYDRAULIC PIPING STANDARD HANDBOOK Revision 1 Preface We aim to fill a gap in technical literature. At this moment there are no hydraulic piping standards available which cover different pressure classes
More informationCheck Valves & Actuated Valves
heck Valves & ctuated Valves & U Series Piston non-return valves rated 6,000 psi & 10,000 psi X Series Piston non-return valves rated 20,000 psi Pneumatic ctuators Pneumatically actuated valves Electric
More informationGAS DISTRIBUTION PRODUCTS STEEL SERVICE TEES
GAS DISTRIBUTION PRODUCTS STEEL SERVICE TEES CONTINENTAL INDUSTRIES ABOUT US THE ULTIMATE CONNECTION Our Company Continental Industries, headquartered in Tulsa, Oklahoma, was formed in 1958 and is today
More informationISORIA. Centered disc butterfly valves with AMRING elastomer liner. 240 PSI: 1½ to8. 150 PSI : 10 to 24
Type series booklet 8448.1/2-EN--US ISORIA Centered disc butterfly valves with AMRING elastomer liner 240 PSI: 1½ to8 150 PSI : 10 to 24 Design in accordance with ISO 10631 Manual, electrical, pneumatical
More informationGYROLOK to Tube Union
GYROLOK HOKE manufactured GYROLOK tube fittings have been carefully designed and manufactured to provide a wide range of outstanding leak-tight application capabilities. GYROLOK to Tube Union MANUFACTURED
More informationDiwiTherm, Resistance Thermometers Model TR75, with digital Display Battery or Solar Powered
Electrical Temperature Measurement DiwiTherm, Resistance Thermometers Model TR75, with digital Display Battery or Solar Powered WIKA Data Sheet TE 60.75 Applications Machinery, plant and tank construction
More informationCAT. 0113-GB MODELS. Series. Flat-face quick-release couplings. UNI EN ISO 9001 Cert. n 2905 ISO/TS 16949
CAT. 0113-GB NEW MODELS Flat-face quick-release couplings UNI EN ISO 9001 Cert. n 2905 ISO/TS 16949 FLAT-FACE QUICK-RELEASE COUPLINGS Features Benefits Applications Flat-face shut-off valves: easy to clean.
More informationMetric Composite Push-In Fittings
Metric Composite Push-In Fittings Version 2013 1.0 3058 Ranchview Lane North. Plymouth, MN 55447 Polyconn now offers a Metric fitting composite line to complement our inch composite fittings. They can
More informationBNC, N, TNC Connectors
BNC, N, TNC Connectors ONLINE CATALOG AEP BNC, N, and TNC series connectors are specifically designed for use with miniature flexible and semi-rigid cable. They are available with goldplated or nickel-plated
More informationStainless Steel Valves For the Sanitary Industries
www.swagelok.com Stainless Steel Valves For the Sanitary Industries Sanitary ball valves Manual and pneumatically actuated butterfly valves Disk and ball check valves ir blow check valves ir relief valves
More informationMANTA Piston Distributor for Oil and Fluid Grease
MANTA Piston Distributor for Oil and Fluid Grease Function Piston distributors meter out and distribute the oil delivered by an intermittently actuated pump. The quantities of oil for the individual lube
More informationF l u i d M a n a g e m e n t S o l uti o n s fo r t h e A e rospace Industry
F l u i d M a n a g e m e n t S o l uti o n s fo r t h e A e rospace Industry TABLE OF CONTENTS About Titeflex......................................................................................... 3
More informationANOISON HPQN SERIES HPQN CONNECTORS INTERFACE DIMENSIONS. Description. Interface Dimensions 21 Characteristics
SERIES HPQN CONNECTORS DESCRIPTION CONTENT Designed by James Qu at Anoison in 2006, the HPQN is a quick locking version of the widely used type N connector. By replacing the threaded interface of the original
More informationFLEXWELL Safety Pipe. Pipe systems for installations Technical details
Pipe systems for installations Technical details Notes 08.04.2013 T page 2 Contents 4.0 4.0 Contents 4.1 System description 4.100 System description FLEXWELL Safety Pipe 4.105 System description FLEXWELL
More informationEUROPEAN OEM SERVICE STAUFF. STAUFF - Line - Local solutions for individual customers worldwide
EUROPEAN OEM SERVICE STAUFF STAUFF - Line - Local solutions for individual customers worldwide STAUFF - Line - Experienced staff and precision machinery enable the manufacture of high-quality hydraulic
More informationPipe Thread Types and Designations
Pipe Thread Types and Designations Overview: Different types of screw threads have evolved for fastening, and hydraulic systems. Of special concern are plastic-to-metal, taper/parallel threaded joints
More informationT-Series Precision Linear Actuators Installation and Service Manual DW110353GB-1018 - EDITION 5. www.thomsonlinear.com
T-Series Precision Linear Actuators Installation and Service Manual DW110353GB-1018 - EDITION 5 www.thomsonlinear.com Version History Edition Number Edition Date Reason for Revision 1 2004 First edition
More informationThreaded Resistance Thermometers Model TR10-D, Miniature Design
Electrical Temperature Measurement Threaded Resistance Thermometers Model TR10-D, Miniature Design WIKA Data Sheet TE 60.04 Applications Machine building, plant and tank construction Power transmission
More informationARI-DP30 / DP32 / DP33 / DP34 / DP34T / DP34Tri / DP35 Pneumatic actuator ARI-DP Pneumatic actuator ARI-DP
ARI-DP30 / DP32 / DP33 / DP34 / DP34T / DP34Tri / DP35 Pneumatic actuator ARI-DP Pneumatic actuator ARI-DP ARI-DP30 Pneumatic actuator Page 2 ARI-DP32 ARI-DP33 Pneumatic actuator DP-Actuator Extended stem
More informationSeries M Applicable Tubing: ø2 Connection Thread: M3, M5
iniature Fittings Series pplicable Tubing: ø2 onnection Thread:, RoHS ade to Order (Refer to page for details.) pplicable O.D. x I.D.: ø2 x ø.2 onnection thread: / One-touch fitting size: ø.2 / ø Tubing
More informationMVX-Series Diesel Engine Air Shut Down Valves
MVX-Series Diesel Engine Air Shut Down Valves (Cable operated closure/integral reset lever types) Selection, Application and Maintenance SPECIAL VALVE MVX-304 This is a special version of valve type MVX-303
More informationMHT. Pressure Filters HIGH PRESSURE INLINE FILTER
MHT Pressure Filters HIGH PEUE INLINE FILTE Pressure Filters MHT MHT 4 MPa ( bar) Port sizes: / / Flow rates: 0 l/min TEHNIAL DATA Max. working pressure: 4 MPa ( bar) Max. testing pressure: 6 MPa (60 bar)
More informationPower Cube Open Source Ecology Page 1. Power Cube. Version 4
Power Cube Open Source Ecology Page 1 Power Cube Version 4 Power Cube Open Source Ecology Page 2 Contents Table of Contents Power Cube... 1 Contents...2 Introduction... 3 Bill Of Materials...4 Discrete
More informationTYPE APPROVAL CERTIFICATE
DET NORSKE VERITAS TYPE APPROVAL CERTIFICATE CERTIFICATE NO. P-14862 This is to certify that the Pipe System with Couplings with type designation(s) Megapress with SC-contour Issued to Viega GmbH & Co.
More informationHoneywell Pressure Switches Line Guide
Honeywell Pressure Line Guide Better under pressure. For years, manufacturers and operators of heavy-duty equipment have trusted Honeywell pressure and vacuum switches. They re proven under pressure, in
More informationUNIT CONVERSIONS & FORMULAS
4, PSI UNIT CONVERSIONS & FORMULAS MEASUREMENT CONVERSION EXAMPLE 1 in. = 25.4 mm 12 in. x 25.4 = 34.8 mm 1 in. =.254 m 12 in. x.254 = 3.5 m LENGTH 1 ft. =.348 m 12 ft. x.348 = 3.68 m 1 mm =.394 in. 1
More informationSMA Series Subminiature RF Connectors
SMA Series Subminiature RF Connectors Screw-on mating Frequency range DC-18 GHz High performance Rugged construction ONLINE CATALOG 104 John W. Murphy Drive P.O. Box 510 New Haven, CT 06513 www.aepconnectors.com
More informationCylinders DIN ISO 6431 and VDMA 24 562
Double acting Standard executions Version Shape of barrel Symbol Type MAGNETIC STANDARD AMA AMT 1 For the magnetic reed switches type ASV see from page 1.110.1. For coupling cylinders/reed swiches/brackets
More informationSITRANS F flowmeters SITRANS F M
Overview Integration The complete flowmeter consists of a flow sensor and an associated transmitter MAG 5000, 6000 or 6000 I. The flexible communication concept USM II simplifies integration and update
More informationProduct Catalogue Australian Plumbing Fittings
Capillary Sizes ELBOWS - 90 Degree J08123 15mm x 15mm 90Deg LE Cu SR ELB F+F (No. 12) J08131 18mm x 18mm 90Deg LE Cu ELB F+F (No. 12) J08145 20mm x 20mm 90Deg LE Cu SR ELB F+F (No. 12) J08147 20mm x 15mm
More informationGROENEVELD AUTOMATIC GREASING SYSTEMS
GROENEVELD AUTOMATIC GREASING SYSTEMS TWIN Parts & Accessories Book Pumps, Fittings, Injectors, Lining, etc. www.groeneveld-group.com 1 TWIN ELECTRICAL Item Part # Description 1 F113966 Switch 24V 2 F122991
More information4. Combi valves. 7. Fire hydrants. 8. Check valves. 9. Air valves
1. General company and product information 2. Flanged gate valves for water 3. Other gate valves for water 4. Combi valves 5. Service connection valves for water 6. Valves and fittings for gas 7. Fire
More informationEO and EO-2 Bite Type Fittings The Fitting Authority
EO and EO-2 Bite Type Fittings The Fitting Authority Visual Index G Union W Union Elbow T Union Tee K Union Cross Tube to Tube Fittings Male Stud Fittings Page 25 GE-R/M Male Connector Page 26 GE-R/M-ED
More informationMÁQUINAS AGRÍCOLAS JACTO S.A. EDITION
AJ English version EDITION - 06/007 CODE - 9790 Parts catalog MÁQUINAS AGRÍCOLAS JACTO S.A. Rua Dr. Luiz Miranda, 650 7580-000 - Pompéia - SP - Brasil Tel.: +55 4 3405-00 - Fax: +55 4 345 306 E-mail: export@jacto.com.br
More informationDRAFT 1 PIPE & PORT 4-28-06
JI Fittings DRAFT PIPE & PORT 4-8-06 The Fitting Authority 4300 Catalog JI Fittings F3T4 BPT / 30 Flare PNMT4 FNMT4 Cap V3T4 BPT / 30 Flare C3T4 BPT / 30 Flare 30 Flare F3P4 BPT / 60 Cone P4 Union G3P4
More informationPPS-PPQ-BT-PIAS RESIN INSULATORS FOR OIL INSULATED ELECTRICAL MACHINES
PPS-PPQ-BT-PIAS RESIN INSULATORS FOR OIL INSULATED ELECTRICAL MACHINES BUSHING WITH PLUG CONNECTION WITH OUTER CONE PPS CHARACTERISTICS The PPS bushing can be used as a fixed section for the entry of medium
More informationBRASS FITTINGS FOR THREADED PIPES
03/14 BRASS FITTINGS GENERAL FEATURES The brass fittings for threaded pipes are used as junctions for pipelines with threaded connection UNI ISO 228/1. The thread dimensions are subdivided in various types
More informationMikrotherm. Manual radiator valves. To be precise.
Manual radiator valves To be precise. Description HEIMEIER Mikrotherm manual radiator valves made of corrosion-resistant gunmetal, with white plastic hand wheel cap, tight-packed with protection film.
More informationPlastic tube flowmeters Series PT/PS
Plastic tube flowmeters Variable area flowmeter for liquids and gases Low cost, excellent readability and light weight Simple installation (flanged, threaded or socket ends for solvent or fusion welding
More informationThese features have made Lo Torc valves the choice of high pressure plug value users, worldwide:
LO TORC Plug Valve The high value, dependable performance, and low maintenance requirements of Halliburton Lo Torc valves can help reduce overall operating costs and help cut downtime. These features have
More informationService Bulletin No. SB 06-2-23 MANDATORY SERVICE BULLETIN. Safetying of standard and flop-type fuel pickup tubes.
VAN S AIRCRAFT, INC. 14401 NE Keil Road, Aurora, Oregon, USA 97002 PHONE 503-678-6545 FAX 503-678-6560 www.vansaircraft.com info@vansaircraft.com Service Bulletin No. SB 06-2-23 MANDATORY SERVICE BULLETIN
More informationTurbine Flow Sensor Series VTR
Turbine Flow Sensor Series VTR SIKA Turbine Flow Sensor Series VTR Extra robust, impressively precise SIKA s VTR turbine flow sensor allows you to determine precisely, dependably and easily the flow rates
More informationRefrigeration and air conditioning Date: 10/2013
Catalogue 40 WEH Connectors for filling, evacuating and testing of refrigeration and air conditioning components Refrigeration and air conditioning Date: 10/2013 WEH - We Engineer Hightech All rights reserved,
More informationRated Burst Pressure 200 Series: 2.5 : 1 H200 Series: 4 : 1
200 Series 0 to 3000 psig heck Valves H200 Series 0 to 6000 psig heck Valves Features & enefits Quick opening/positive closing Provides a wide range of adaptability Large flow capacity The patented sealing
More informationFILTRATION AMIAD PLASTIC FILTERS, SCREENS & DISCS
4 AMIAD PLASTIC FILTERS, SCREENS & DISCS Max pressure 10.0 Bar, max temperature 60 O 3/4 to 1 1/2 bodies manufactured from polyacetal 2 bodies and above manufactured from polymade and glass fibre 3/4 to
More information2 H OW TO ORDER 2 D ESIGN FEATURES 3 P RODUCTS INDEX 35 O VAL FLANGES 35 B LEED 35 C ONDENSING POTS 36 S YPHONS 36 A IR FEED HEADERS
MEK PIPING srl www.mekpiping.com Sede legale/headquarter : Via San Giovanni osco zona P.I.P. Poggiorsini, () 70020 Tel / Fax + 39 080 37063 - Mob. +39 346 3438582 - E-MIL: mekpiping@mekpiping.com P.IV
More informationStyle 07 Zero Flex Rigid Coupling. Style 75 Flexible Coupling. Style 77 Flexible Coupling 11. Description
Style 07 Zero Flex Rigid Coupling The unique angled pad design adjusts to standard pipe tolerances to positively clamp the pipe to resist flexural and torsional loads. Working pressures are based on standard
More informationAssembly Instruction CAI- Connector with universal Endbell
CANNON STANDARD Seite 1 von 17 CAI- Connector with universal Endbell Shell size 10 to 36 with APK contact / Trident T2P - contact Illustration and assembly exemplary of CAI Layout 20-0306 with APK / Trident
More informationHome. News. Products. Contact Us. Treated Swagelok Fittings--for better inertness!
New GC Accessories New GC Accessories New GC Accessories Fittings: Swagelok : Home Brass & Stainless Steel News Also available: Products Silco Fittings : Siltek & Sulfinert Also available: Info & Support
More informationVisual Index O-Rings and Seals
O-Rings and Seals N O-Ring Face Seal ORFS O-Ring N4 XO O-Ring N4 Port Ends SAE, Metric,, JIS, K4 SAE O-Ring N4 ISO 6149 O-Ring N5 Metric O-Ring Metric Retaining Ring O-Ring Retaining Ring EOlastic Seal
More informationPMP 4000 Series. Druck Amplified Output Pressure Transducers. GE Sensing. Applications. Features
Features Applications The PMP 4000 Series provides a complete range of high level voltage output pressure transducers offering advanced levels of measurement accuracy, stability and flexibility from a
More informationFluid Level Gauge Fluid Level Sensor Temperature Switch FSA / FSK / TS
Fluid Level Gauge Fluid Level Sensor Temperature Switch FSA / FSK / TS up to size 381; to PN 0.5; to T = 80 C 1. Description 1.1. General FSA fluid level gauges, FSK fluid level sensors and TS temperature
More informationLinear modules Lifting units Rotary modules Grip modules Inductive proximity switches Plug connectors
20000 Linear modules Lifting units Rotary modules Grip modules Inductive proximity switches Plug connectors 23000 22000 21000 20000 09000 08000 07000 06000 05000 04000 03000 02000 01000 823 Notes 824 Technical
More informationRelative and absolute pressure switch type 529
Relative and absolute pressure switch type 529 Pressure range -1... 0 60 bar The compact type 529 pressure switch is based upon the Huba Control developed unique ceramic technology used for the last 20
More informationUNIK 5800/5900. Flameproof/Explosion-Proof Pressure Sensing Platform. GE Measurement & Control. High Quality. Features. Bespoke as Standard.
GE Measurement & Control UNIK 5800/5900 Flameproof/Explosion-Proof Pressure Sensing Platform The 5800 and 5900 are compact and rugged versions of the high performance UNIK 5000 pressure sensing platform
More informationSIGRAFLEX EMAIL. Properties. Applications
Multilayer sealing sheet, adhesive-free made from flexible graphite foil reinforced with stainless steel foils especially for use in PTFE envelope gaskets SIGRAFLEX EMAIL has been developed specially for
More informationA New Improved Range of Push-fit Fittings for Cold Water Services
A New Improved Range of Push-fit Fittings for Cold Water Services A new improved range of Push-fit Fittings for Cold Water Services, with Stainless Steel Teeth to grip the pipe Push-fit Fittings for Cold
More informationAeroquip Series 1800 & 1801 Low Profile Ratchet Lock Couplings. Lightweight Self-Sealing Compact Design Minimum Pressure Loss
Aeroquip Series 1800 & 1801 Low Profile Ratchet Lock s Lightweight Self-Sealing Compact Design Minimum Pressure Loss Aeroquip Low Profile Ratchet Lock s, Caps and Plugs 1800 and 1801 Series Lightweight,
More informationVehicle Brake System Monitoring 2-wire, 4-20 ma option; Intrinsic Safety Approval to E Exia IIC T4 (Tamb=60 C) BASEEFA, CENELEC EN50-020
Field proven rugged construction High overpressure capability High reliability for demanding environments Application specific customization Excellent media compatibility Shock and vibration resistant
More informationRUBBER SLEEVE KNIFE GATE VALVE
RUBBER SLEEVE KNIFE GATE VALVE The model knife gate is a wafer valve designed for a wide range of industrial applications. The double-seated design provides bi-directional shut off. The design of the valve
More informationHOSES COMPOSITE HOSES & FITTINGS HOSES. Pag. 5J533 TANK CLEANING 10 BAR (150 PSI) BS5842 ARRETE' ADR ANNEXE 1
COMPOSITE S & FITTINGS Pag. S S 5J533 TANK CLEANING 10 BAR (150 PSI) 5J551 CHEMICALS SUCTION AND DISCHARGE - STANDARD WEIGHT - 10 BAR (150 PSI) 5J553 CHEMICALS SUCTION AND DISCHARGE - STANDARD WEIGHT -
More informationWorkshop Compressors CLASSIC Series
www.kaeser.com Workshop Compressors CLASSIC Series Displacement: 210 to 40 l/min Pressure: 10 bar What do you expect from your CLASSIC workshop compressor? Quality results can be achieved only by using
More informationUniversal Installation and Maintenance Instructions Double Wall Spill Containment Bucket (5 and 15 gal)
Universal Installation and Maintenance Instructions Double Wall Spill Containment Bucket (5 and 15 gal) IMPORTANT: It is imperative that the user read these warnings and use of the assembly instructions
More informationMaterials : Cast iron body
Size : Ends : Min Temperature : Max Temperature : DN 50 to DN 500 Between flanges ISO PN10-10 C + 90 C Max Pressure : 10 Bars up to DN 200 Specifications : Non rising stem and handwheel Bidirectional tightness
More informationCharts (Section XI) www.accordintl.com Ph. (713) 641-2288 Fax (713) 641-3636 Main PAGE #
Charts (Section XI) Part No. Description Page No. Fraction, Decimal, and Millimeter Conversion Chart 2 Measurement Chart (Metric & Standard) 3 Standard (ANSI B16.5) Flange Dimension Chart 4 Metric Flange
More informationHow To Control A Power Supply With A Mini Transmitter And Switch (Power Supply)
transmitter (2 wire) / switch for continuous or On/Off Control Indication, monitoring, transmitting and continuous or On/Off control in one device Output signal 4...20 ma, 2-wire for continuous control
More informationValve series MN-06 acc. to NAMUR, 3/2-way G1/4 750 Nl/min (0.762 Cv)
Valve series MN-06 acc. to NAMUR, 3/2-way G1/4 750 Nl/min (0.762 Cv) Order code Series and function 1) Plug socket see page 5.042. MN-06-310-HN-442 Standard coil 1) 441 = 12 V DC, 4.2 W 442 = 24 V DC,
More information