Pro/Engineer WILDFIRE 5.0 Student: **** ******* CDI: 70D Instructor: Gary Lamit CDI CAD

Save this PDF as:
 WORD  PNG  TXT  JPG

Size: px
Start display at page:

Download "Pro/Engineer WILDFIRE 5.0 Student: **** ******* CDI: 70D Instructor: Gary Lamit CDI CAD"

Transcription

1 Pro/Engineer WILDFIRE 5.0 Student: **** ******* CDI: 70D Instructor: Gary Lamit CDI CAD

2 LESSON 1 Pro/Engineer Overview Create two part models: Pin & Plate Create assembly with two parts Create piece part & assembly drawings

3 LESSON 2 Pro/Engineer Wildfire5 Utilize the cad-resource to down load 3D CAD models from internet. Familiarize with Pro/E working environment. Access of HELP function to learn CAD software. Use System settings to customize display setting for own use. Where to get Information about model. Pro/E version Model Edited Model

4 LESSON 3 Direct Modeling Utilize the Engineering tools such as Hole, Shell, Round Chamfer and Draft to create various parts. Use of tool tips. Use System settings to customize display setting for own use. Where to get Information about model. Revolve cut Draft Shell Revolve Extrude Cut Revolve Ellipse Hole Mirror Sweep

5 LESSON 4 Extrusion Learn that the first solid feature in part creation is EXTRUSION. There are four basic protrusion: Extrusion, Revolve, Blend and Sweep. Understand the overall function, form and fit of part before plan a design ( Design Intent). Learn to define and set Material type. Understand Setup & Environment settings and feature Dashboard.

6 LESSON 5 Datums, Layers and Sections Learn to create Datums to locate features, set datum planes for Geo. Tol. and use it to establish Model Sectioning. Utilize of Info command to extract Relation information. Enhance model visualization with the use of Color and Shading commands. Learn to use Layers to organize features.

7 LESSON 6 Revolve Features Learn to master the Revolve Tool. Known the use of Chamfer, threads and standard Holes commands. Perform a variety of tasks from Organize drop down menu in the Browser: New folder, Rename, Cut, copy, Paste, Delete and Add to common folder. Learn some basic set up when create a new part: properties. Using Model Player to observe how a part was built. Clamp Ball Clamp Swivel Clamp Foot

8 LESSON 7 Feature Operations Perform Rib Tool to create a thin fin or web that attached to a part. Utilize Family Table to generate iteration of the original model. Familiarize with Copy, Paste and Paste Special commands.

9 LESSON 8 Assemblies-Bottom-Up Design Utilize Assemble command to add component to assembly and create subassembly. Understand and use a variety of Assembly Constraints Learn how to modify a component constraint and edit a constraint value. Run clearance and interference check. Off the shelf components Clamping Stud ½-13 x 5.00 lg Clamping Stud ½-13 x 3.50 lg Flange Nut

10 LESSON 8 Assemblies-Bottom-Up Design-Continued Clamp Arm-Design Clamping Ball Clamping Swivel Fabricated components Clamp Foot

11 LESSON 8 Assemblies-Bottom-Up Design-Continued Clamp Subassembly- Cross Section View Clamp Subassembly Clamp Subassembly BOM Report

12 LESSON 8 Assemblies-Top-down Design Add top level components Utilize Assembly Constraint to place component Modify a component constraint as required Create a component in Assembly Mode Add Subassembly to Top assembly Swing Clamp Assembly

13 LESSON 8 Assemblies- Top-down Design- Continued Use Bill of Material command to view assembly structure. Under Analysis > Model pull down menu, use various commands o check for clearance and interference.

14 LESSON 9 Exploded Assemblies & View Manager Learn to create Exploded Views and Exploded States. Learn how to add URL and 3D note Model Notes

15 LESSON 9 Exploded Assemblies & View Manager Default View Exploded View Utilize the View Manager to organize and control views states. Create a unique component visibility settings (Style States). Perspective View View Style

16 LESSON 10 Introduction to Drawings Learn to create part drawings. Retrieve a standard format and change to a new customize format. Know how to add, move, erase and delete views. Know how to change scale of a view. Import model dimensions and cleanup dimension positions.

17 LESSON 11 Part Drawings Learn to create detail, cross section and auxiliary views. Generate multiple drawing sheets. Know how to do sheet setup and customize configuration file under drawing option file. Add geometric tolerances to drawing views

18 LESSON 12 Assembly Drawings Learn to create assembly drawing. Generate Part List from a Bill of Materials. Know how to create balloon (item number). Create a section assembly view, a table to generate part list automatically. Know how to customize drawing format.

19 LESSON 12 Assembly Drawings- Continued

20 PROJECT 1 Angle Block Learn to use default datums to create part. Create part using various extrusion command.

21 PROJECT 2 T-Block Learn the use of extrusion. Know how to edit and redefine features from ECO T-Block -Original T-Block- after ECO

22 PROJECT 3 Guide Bracket Learn to use of radius, simple round. Utilize hole command to create simple and counterbore hole. Modify hole annotation.

23 PROJECT 4 Angle Frame Utilize variety of datum planes and layering scheme. Create relation to control the depth of countersink hole. Set up the material and unit of part.

Autodesk Inventor for Experienced 3D CAD Users

Autodesk Inventor for Experienced 3D CAD Users Autodesk Inventor for Experienced 3D CAD Users Course Length: 3 days The Autodesk Inventor for Experienced 3D CAD Users training course is intended to provide accelerated introductory training in the Autodesk

More information

Introduction to SolidWorks Software

Introduction to SolidWorks Software Introduction to SolidWorks Software Marine Advanced Technology Education Design Tools What is SolidWorks? SolidWorks is design automation software. In SolidWorks, you sketch ideas and experiment with different

More information

Autodesk Inventor Introduction to Solid Modeling

Autodesk Inventor Introduction to Solid Modeling Autodesk Inventor Introduction to Solid Modeling Course Length: 5 days The Autodesk Inventor Introduction to Solid Modeling training guide provides you with an understanding of the parametric design philosophy

More information

CATIA V5R19 Curriculum

CATIA V5R19 Curriculum CATIA V5R19 Curriculum Introduction Starting CATIA V5 CATIA User Interface Specification Tree Manipulating Objects Objects Visualization Saving and Closing Documents Sketcher Sketcher Geometry Management

More information

AutoCAD 3D. MicroStation. Courseware Issued (Optional) AutoCAD (30 Days Trial Version) Reference Guide Project Workbook

AutoCAD 3D. MicroStation. Courseware Issued (Optional) AutoCAD (30 Days Trial Version) Reference Guide Project Workbook 2D CAD Introduction Isometric drawings File management Perspective drawings Orthographic drawings Annotations and Dimensions View management Team work Display management Layout management Layer management

More information

Pro/ENGINEER Wildfire 4.0 Basic Design

Pro/ENGINEER Wildfire 4.0 Basic Design Introduction Datum features are non-solid features used during the construction of other features. The most common datum features include planes, axes, coordinate systems, and curves. Datum features do

More information

Live Classroom Curriculum Guide

Live Classroom Curriculum Guide Curriculum Guide Live Classroom Curriculum Guide Update to Creo Parametric from Creo Elements/Pro 5.0 Update to Creo Parametric from Pro/ENGINEER Wildfire 4.0 Introduction to Creo Parametric Advanced Modeling

More information

Table of Contents MicroStation Everything 3D

Table of Contents MicroStation Everything 3D Table of Contents MicroStation Everything 3D Course Overview 1 Course Description 1 Target Audience 1 Prerequisites 1 Course Objectives 2 Modules Included 2 Introductory Knowledge 3 Questions 3 Answers

More information

Autodesk Inventor Advanced Module 3 Hole Features

Autodesk Inventor Advanced Module 3 Hole Features Inventor Self-paced ecourse Autodesk Inventor Advanced Module 3 Hole Features Learning Outcomes When you have completed this module, you will be able to: 1 Describe center points and drilled, counterbored,

More information

Figure 1 - Delta Theta Input Selection

Figure 1 - Delta Theta Input Selection Creating Cams in Pro/Engineer Wildfire Using DYNACAM Mechanical Engineering Mechanical Design Created by: David E. Yamartino M.S. Mechanical Engineering May 2004 April 12, 2004 Objective: The objective

More information

Online Training Program Offered by CADCIM Technologies

Online Training Program Offered by CADCIM Technologies Online Training Program Offered by CADCIM Technologies CADCIM Technologies provides effective and affordable online training on various software packages including Computer Aided Design and Manufacturing

More information

Creo 3.0. Curriculum Guide

Creo 3.0. Curriculum Guide Creo 3.0 Curriculum Guide Live Classroom Curriculum Guide Update to Creo Parametric 3.0 from Creo Parametric 2.0 Introduction to Creo Parametric 3.0 Advanced Modeling using Creo Parametric 3.0 Advanced

More information

Parametric Technology Corporation. Getting Started with Pro/ENGINEER Wildfire 4.0

Parametric Technology Corporation. Getting Started with Pro/ENGINEER Wildfire 4.0 Parametric Technology Corporation Getting Started with Pro/ENGINEER Wildfire 4.0 A Tutorial-based Guide to Workflow October 2007 Copyright 2007 Parametric Technology Corporation. All Rights Reserved. User

More information

SOLIDWORKS SOLIDWORKS Essentials. Dassault Systèmes SolidWorks Corporation 175 Wyman Street Waltham, MA U.S.A.

SOLIDWORKS SOLIDWORKS Essentials. Dassault Systèmes SolidWorks Corporation 175 Wyman Street Waltham, MA U.S.A. SOLIDWORKS 2016 SOLIDWORKS Essentials Dassault Systèmes SolidWorks Corporation 175 Wyman Street Waltham, MA 02451 U.S.A. 1995-2015, Dassault Systemes SolidWorks Corporation, a Dassault Systèmes SE company,

More information

CATIA Drafting TABLE OF CONTENTS

CATIA Drafting TABLE OF CONTENTS TABLE OF CONTENTS Introduction...1 Drafting...2 Drawing Screen...3 Pull-down Menus...4 File...4 Edit...5 View...6 Insert...7 Tools...8 Drafting Workbench...9 Views and Sheets...9 Dimensions and Annotations...10

More information

Creating Drawings in Pro/ENGINEER

Creating Drawings in Pro/ENGINEER 6 Creating Drawings in Pro/ENGINEER This chapter shows you how to bring the cell phone models and the assembly you ve created into the Pro/ENGINEER Drawing mode to create a drawing. A mechanical drawing

More information

Computer-Aided Design

Computer-Aided Design Training Objective After watching the program and reviewing this printed material, the viewer will understand the basic concepts of computer-aided design, or CAD. The relationship between 2-dimensional

More information

Tip of the Week: Creating Geometry from AutoCAD Drawings

Tip of the Week: Creating Geometry from AutoCAD Drawings PTC Email Newsletter March 4, 2002 PTC Product Focus: Assembly Performance Extension (APX) Tip of the Week: Creating Geometry from AutoCAD Drawings Training: Upcoming Training Classes PTC Product Focus:

More information

Creo Parametric 2.0 Tutorial

Creo Parametric 2.0 Tutorial Creo Parametric 2.0 Tutorial Creo Parametric 1.0 Tutorial and MultiMedia DVD was written for Creo Parametric1.0. PTC released Creo Parametric 2.0 in the Spring of 2012. This book is fully compatible with

More information

Computer Aided Design (CAD), ME 530.414, JHU Professor Dan Stoianovici, dss@jhu.edu

Computer Aided Design (CAD), ME 530.414, JHU Professor Dan Stoianovici, dss@jhu.edu Computer Aided Design (CAD), ME 530.414, JHU Professor Dan Stoianovici, dss@jhu.edu COURSE DESCRIPTION: The course outlines modern solid modeling design, analysis, simulation, and manufacturing of mechanical

More information

Mold Tooling Design. CATIA V5 Mold Design. Training Curriculum

Mold Tooling Design. CATIA V5 Mold Design. Training Curriculum Mold Tooling Design CATIA V5 Mold Design Training Curriculum CATIA V5 Mold Design Training Curriculum The world is moving to CATIA V5 and the Mold tooling industry with its rapid engineering changes and

More information

AutoCAD 2009. New Icon Quick Reference

AutoCAD 2009. New Icon Quick Reference AutoCAD 2009 New Quick Reference Contents Chapter 1 New Quick Reference..................... 1 Toolbars................................... 1 3D Navigation Toolbar........................ 1 CAD Standards

More information

Lesson 2 Creo Parametric

Lesson 2 Creo Parametric Lesson 2 Creo Parametric Figure 2.1 Part T-Nut OBJECTIVES Understand and customize the User Interface (UI) Download 3D CAD models from Creo/Library (old Pro/Library) Experience the Creo Parametric Browser

More information

Learning Autodesk. Modeling, Analysis and Animation SDC. Randy H. Shih. Better Textbooks. Lower Prices. PUBLICATIONS www.sdcpublications.

Learning Autodesk. Modeling, Analysis and Animation SDC. Randy H. Shih. Better Textbooks. Lower Prices. PUBLICATIONS www.sdcpublications. Learning Autodesk Inventor 2012 Modeling, Analysis and Animation Randy H. Shih SDC Better Textbooks. Lower Prices. PUBLICATIONS www.sdcpublications.com Schroff Development Corporation Learning Autodesk

More information

After completing this tutorial, you will be able to: Use the new 3D Modeling tools in AutoCAD 2007 for basic Lofting.

After completing this tutorial, you will be able to: Use the new 3D Modeling tools in AutoCAD 2007 for basic Lofting. TUTORIAL 3 Lofted Solid Learning Objectives After completing this tutorial, you will be able to: Use the new 3D Modeling tools in AutoCAD 2007 for basic Lofting. Required Competencies Before starting this

More information

After this activity, you will be able to:

After this activity, you will be able to: CAD Tutorial - 1 Purpose: Introduce you to solid modeling and basic solid modeling functions. Importance: Solid Modeling is a way for scientists and engineers to geometrically model their work, check for

More information

Introduction to Autodesk Inventor for F1 in Schools

Introduction to Autodesk Inventor for F1 in Schools Introduction to Autodesk Inventor for F1 in Schools F1 in Schools Race Car In this course you will be introduced to Autodesk Inventor, which is the centerpiece of Autodesk s digital prototyping strategy

More information

Pro/ENGINEER Wildfire 3.0 Tips

Pro/ENGINEER Wildfire 3.0 Tips Pro/ENGINEER Wildfire 3.0 Tips W. Durfee Keyboard/mouse shortcuts CTRL+D Default view Middle-Button Spin SHIFT+Middle Pan CTRL+Middle Zoom (press, drag up-down) CTRL+Middle Turn (press, drag left-right)

More information

CREATING A PRO/ENGINEER DRAWING

CREATING A PRO/ENGINEER DRAWING C H A P T E R 8 CREATING A PRO/ENGINEER DRAWING INTRODUCTION Drawing mode is used to produce detailed engineer drawings of parts and assemblies. Drawing mode has the capability to produce orthographic

More information

SolidWorks. SolidWorks Teacher Guide. and Student Courseware

SolidWorks. SolidWorks Teacher Guide. and Student Courseware SolidWorks SolidWorks Teacher Guide and Student Courseware SolidWorks Corporation Outside the U.S.: +1-978-371-5011 300 Baker Avenue Fax: +1-978-371-7303 Concord, Massachusetts 01742 USA Email: info@solidworks.com

More information

Publication Number spse01510

Publication Number spse01510 Sketching Publication Number spse01510 Sketching Publication Number spse01510 Proprietary and restricted rights notice This software and related documentation are proprietary to Siemens Product Lifecycle

More information

APRINS IT Solutions 2015 TRAINING PROGRAMS COLLEGE CAMPUS. Submitted by. Dedicate & get the Best APRINS IT SOLUTIONS. www.aprins.org.

APRINS IT Solutions 2015 TRAINING PROGRAMS COLLEGE CAMPUS. Submitted by. Dedicate & get the Best APRINS IT SOLUTIONS. www.aprins.org. TRAINING PROGRAMS At COLLEGE CAMPUS Submitted by Dedicate & get the Best APRINS IT SOLUTIONS www.aprins.org. Page 1 of 13 Our popular programs at College Campus Corporate Training: This is a comprehensive

More information

Introduction to Autodesk Inventor for F1 in Schools

Introduction to Autodesk Inventor for F1 in Schools F1 in Schools race car Introduction to Autodesk Inventor for F1 in Schools In this course you will be introduced to Autodesk Inventor, which is the centerpiece of Autodesk s Digital Prototyping strategy

More information

Part Design. Preface What's New? Getting Started Basic Tasks Advanced Tasks Workbench Description Customizing Glossary Index

Part Design. Preface What's New? Getting Started Basic Tasks Advanced Tasks Workbench Description Customizing Glossary Index Part Design Preface What's New? Getting Started Basic Tasks Advanced Tasks Workbench Description Customizing Glossary Index Dassault Systèmes 1994-99. All rights reserved. Preface The CATIA Version 5 Part

More information

Introducing SolidWorks

Introducing SolidWorks Introducing SolidWorks 1995-2002, SolidWorks Corporation 300 Baker Avenue Concord, Massachusetts 01742 USA All Rights Reserved U.S. Patents 5,815,154; 6,219,049; 6,219,055 SolidWorks Corporation is a Dassault

More information

CATIA Wireframe & Surfaces TABLE OF CONTENTS

CATIA Wireframe & Surfaces TABLE OF CONTENTS TABLE OF CONTENTS Introduction... 1 Wireframe & Surfaces... 2 Pull Down Menus... 3 Edit... 3 Insert... 4 Tools... 6 Generative Shape Design Workbench... 7 Bottom Toolbar... 9 Tools... 9 Analysis... 10

More information

SolidWorks DimXpert Frequently Asked Questions

SolidWorks DimXpert Frequently Asked Questions SolidWorks DimXpert Frequently Asked Questions Q: What is DimXpert? A: DimXpert is part of the SWIFT (SolidWorks Intelligent Feature Technology) functionality found in SolidWorks. In SolidWorks 2008, DimXpert

More information

Publication Number spse01660

Publication Number spse01660 Assembly reports Publication Number spse01660 Assembly reports Publication Number spse01660 Proprietary and restricted rights notice This software and related documentation are proprietary to Siemens

More information

Inventor. Keyboard Shortcuts

Inventor. Keyboard Shortcuts Keyboard Shortcuts Inventor shortcut keys, or keyboard shortcuts, allow you to access certain tools by pressing a single key or a key combination. Many shortcut keys correspond to command aliases. keys

More information

Hints on the use of Pro-Engineer for Sheet Metal Design

Hints on the use of Pro-Engineer for Sheet Metal Design 1B Integrated Design Project Hints on the use of Pro-Engineer for Sheet Metal Design (based on ProE version Wildfire 2 ) 1 Philosophy As was demonstrated in the final CAD sessions of part 1A, Pro-engineer

More information

Creating detailed drawings

Creating detailed drawings Creating detailed drawings Publication Number spse01545 Creating detailed drawings Publication Number spse01545 Proprietary and restricted rights notice This software and related documentation are proprietary

More information

AutoCAD Mechanical Essentials

AutoCAD Mechanical Essentials AutoCAD Mechanical Essentials Course Length: 4 days The AutoCAD Mechanical Essentials training course teaches students about the indispensable core topics required to use the AutoCAD Mechanical software.

More information

Las Vegas, Nevada, December 3 6, Speaker Name: Colleen Klein. Course Title: Going Back and Forth from Inventor to AutoCAD

Las Vegas, Nevada, December 3 6, Speaker Name: Colleen Klein. Course Title: Going Back and Forth from Inventor to AutoCAD Las Vegas, Nevada, December 3 6, 2002 Speaker Name: Colleen Klein Course Title: Going Back and Forth from Inventor to AutoCAD Course ID: MA21-2 Wed, 12/4 11:00 am to 12:30 pm Course Outline: Moving mechanical

More information

Chapter 9. Editing Features. Learning Objectives

Chapter 9. Editing Features. Learning Objectives Chapter 9 Editing Features Learning Objectives After completing this chapter, you will be able to: Edit features. Edit sketches of the sketch based features. Edit the sketch plane of the sketch based features.

More information

West Sound Technical Skills Center 101 National Avenue N. Bremerton WA 98312

West Sound Technical Skills Center 101 National Avenue N. Bremerton WA 98312 West Sound Technical Skills Center 101 National Avenue N. Bremerton WA 98312 Instructor: Tony Sharpe Phone: 360-473-0585 Fax: 360-478-5090 Email: tony.sharpe@bremertonschools.org Hours: 7:30 a.m. 3:00

More information

Design & Drafting Services

Design & Drafting Services Design & Drafting Services 1. Mechanical CAD Services 1. Mechanical CAD Services Mechanical Design Services: Custom machine design Packaging machine design Mechanism design Machine tool design Material

More information

PARAMETRIC MODELING. David Rosen. December 1997. By carefully laying-out datums and geometry, then constraining them with dimensions and constraints,

PARAMETRIC MODELING. David Rosen. December 1997. By carefully laying-out datums and geometry, then constraining them with dimensions and constraints, 1 of 5 11/18/2004 6:24 PM PARAMETRIC MODELING David Rosen December 1997 The term parametric modeling denotes the use of parameters to control the dimensions and shape of CAD models. Think of a rubber CAD

More information

Suggested Application Options Settings for Autodesk Inventor 2008

Suggested Application Options Settings for Autodesk Inventor 2008 Suggested Application Options Settings for Autodesk Inventor 2008 The following are suggested application option settings for Autodesk Inventor. This document was created based on the 2008 release of the

More information

Generative Drafting. Preface What's New Getting Started Basic Tasks Workbench Description Customizing Glossary Index

Generative Drafting. Preface What's New Getting Started Basic Tasks Workbench Description Customizing Glossary Index Generative Drafting Preface What's New Getting Started Basic Tasks Workbench Description Customizing Glossary Index Dassault Systèmes 1994-99. All rights reserved. About This Product This User's guide

More information

3D Solid Metal CAD System. SheetWorks

3D Solid Metal CAD System. SheetWorks 3D Solid Metal CAD System SheetWorks 3D CAD Makes a World of Difference! CAD software is widely used by manufacturers for unfolding sheet metal parts. Some of this software is 2D-based, with no assembly

More information

SolidWorks A Brief Description

SolidWorks A Brief Description SolidWorks A Brief Description 2:1 SolidWorks The purpose of the laboratory in ME152 is to be able to apply topics learned in the lecture section of the course as well as ME151 in a CAD environment. The

More information

Autodesk Fusion 360: Assemblies. Overview

Autodesk Fusion 360: Assemblies. Overview Overview In this module you will learn how different components can be put together to create an assembly. We will use several tools in Fusion 360 to make sure that these assemblies are constrained appropriately

More information

Chapter 11. Assembly Modeling. Evaluation chapter. Logon to for more details. Learning Objectives

Chapter 11. Assembly Modeling. Evaluation chapter. Logon to  for more details. Learning Objectives Chapter 11 Assembly Modeling Learning Objectives After completing this chapter you will be able to: Insert components into an assembly file. Create bottom-up assemblies. Insert components into a product

More information

LEAVING CERT DCG SCHEME OF WORK

LEAVING CERT DCG SCHEME OF WORK 2010-11 LEAVING CERT DCG SCHEME OF WORK ST OLIVER S COMMUNITY COLLEGE Mission statement The technology department aspires to provide a safe, stimulating environment where all students can develop their

More information

MEL110 GRAPHIC SCIENCE

MEL110 GRAPHIC SCIENCE Department of Mechanical Engg. INDIAN INSTITUTE OF TECHNOLOGY, DELHI MEL110 GRAPHIC SCIENCE Notes on Autodesk Inventor Professional Software 1 Contents 1.What are the basic features of an Autodesk Inventor

More information

Chapter 1. Creating Sketches in. the Sketch Mode-I. Evaluation chapter. Logon to www.cadcim.com for more details. Learning Objectives

Chapter 1. Creating Sketches in. the Sketch Mode-I. Evaluation chapter. Logon to www.cadcim.com for more details. Learning Objectives Chapter 1 Creating Sketches in Learning Objectives the Sketch Mode-I After completing this chapter you will be able to: Use various tools to create a geometry. Dimension a sketch. Apply constraints to

More information

Creating 2D Drawings from 3D AutoCAD Models

Creating 2D Drawings from 3D AutoCAD Models Creating 2D Drawings from 3D AutoCAD Models David Piggott CrWare, LP GD205-2P This class explores the various techniques in creating 2D part and assembly drawings from 3D AutoCAD models. As part of the

More information

Kankakee Community College

Kankakee Community College Kankakee Community College Course prefix and number: DRFT 2134 Course title: AutoCAD III Semester: Fall 2014 Credit hours: 4 Lecture hours: 2.5 Lab hours: 3 Catalog description: Prerequisite: DRFT 2114,

More information

Activity 7.4 Assembly Models

Activity 7.4 Assembly Models Page 1 of 7 Activity 7.4 Assembly Models Introduction Have you ever pieced together a jigsaw puzzle? The individual puzzle pieces have to be rotated and sometimes flipped around. A piece that makes up

More information

Dimensioning and Tolerancing

Dimensioning and Tolerancing Dimensioning and Tolerancing Dimensioning Before an object can be built, complete information about both the size and shape of the object must be available. The exact shape of an object is communicated

More information

Benchmark Test Reveals Best CAD Tool for Assembly Performance

Benchmark Test Reveals Best CAD Tool for Assembly Performance Benchmark Test Reveals Best CAD Tool for Assembly Performance Speed is everything in product development, especially when it comes to creating and managing large assemblies. And while some 3D CAD vendors

More information

Weld Design. CATIA V5 Training Foils. Weld Design. Copyright DASSAULT SYSTEMES 1. Instructor Notes:

Weld Design. CATIA V5 Training Foils. Weld Design. Copyright DASSAULT SYSTEMES 1. Instructor Notes: CATIA V5 Training Foils Weld Design Version 5 Release 19 January 2009 EDU_CAT_EN_WD1_FI_V5R19 1 About this course Objectives of the course Upon completion of this course you will be able to: - Weld parts,

More information

LABORATORY MANUAL ADVANCED CAD/CAM LAB ME 413 F

LABORATORY MANUAL ADVANCED CAD/CAM LAB ME 413 F LABORATORY MANUAL ADVANCED CAD/CAM LAB ME 413 F INDEX S.No. Title Page No. 1. Setting up of drawing environment by setting drawing limits, drawing units, naming the drawing, naming layers, setting line

More information

Sheet Metal Design: Beyond Bends and Flanges

Sheet Metal Design: Beyond Bends and Flanges 11/30/2005-8:00 am - 9:30 am Room:Pelican 1 (Swan) Walt Disney World Swan and Dolphin Resort Orlando, Florida Sheet Metal Design: Beyond Bends and Flanges Anthony B. Rodriguez - KETIV Technologies MA31-2

More information

The Measure Tool. In This Exercise. Build a Simple Example Model

The Measure Tool. In This Exercise. Build a Simple Example Model The Measure Tool In This Exercise The Measure tool is a versatile and convenient tool that you can use to quickly extract various kinds of measures from components within the part, assembly, and drawing

More information

Prerequisite: Completion of ENG 98, if required, and CGA 101 or written permission of instructor

Prerequisite: Completion of ENG 98, if required, and CGA 101 or written permission of instructor Salem Community College Course Syllabus Course Title: Digital Illustration Course Code: CGA 132 Lecture Hours: 2 Laboratory Hours: 2 Credits: 3 Course Description: Digital Illustration will increase student

More information

Solid Edge structural frames and weldments

Solid Edge structural frames and weldments Solid Edge structural frames and weldments White Paper Intelligent, process-specific applications that speed time to manufacturing. White Paper Solid Edge structural frames and weldments 2 Contents Solid

More information

CATIA V5. Dr Ahmed Kovacevic

CATIA V5. Dr Ahmed Kovacevic CATIA V5 Dr Ahmed Kovacevic City University London School of Engineering and Mathematical Sciences Room CM124, Phone: 8780, E-Mail: Design@city.ac.uk www.city-design.tk www.staff.city.ac.uk/~ra600/intro.htm

More information

Geomagic Design. Release Notes. Get to Market Faster with Better Products at a Lower Cost V17

Geomagic Design. Release Notes. Get to Market Faster with Better Products at a Lower Cost V17 Geomagic Design Get to Market Faster with Better Products at a Lower Cost Release Notes V17 TABLE OF CONTENTS 1 INTRODUCTION 1 COPYRIGHT 1 2 INSTALLATION 2 SOFTWARE IDENTIFICATION 2 UPGRADING TO GEOMAGIC

More information

DMU Viewer CATIA V5R19 TABLE OF CONTENTS

DMU Viewer CATIA V5R19 TABLE OF CONTENTS TABLE OF CONTENTS Introduction...1 DMU Viewer...1 Product Structure Introduction...3 Pull Down Menus...4 Start...4 File...5 Edit...6 View...9 Insert...12 Tools...13 Analyze...16 Window...17 Help...18 Product

More information

3D Modeling in Vectorworks 2009 by Jonathan Pickup. mple

3D Modeling in Vectorworks 2009 by Jonathan Pickup. mple 3D Modeling in Vectorworks 2009 by Jonathan Pickup mple 3D Modeling in Vectorworks 2009 by Jonathan Pickup 3D Modeling Vectorworks 2009 Published by Nemetschek North America 2008 Jonathan Pickup Vectorworks

More information

MET 306 Activity 6. Using Pro/MFG Milling Operations Creo 2.0. Machining a Mast Step

MET 306 Activity 6. Using Pro/MFG Milling Operations Creo 2.0. Machining a Mast Step Using Pro/MFG Milling Operations Creo 2.0 Machining a Mast Step If the Trim option is grayed out when trimming the mill volume, Save (making sure the.asm file is going to the correct subdirectory), Exit

More information

AutoCAD or AutoCAD Mechanical? A Productivity Study.

AutoCAD or AutoCAD Mechanical? A Productivity Study. AutoCAD Mechanical AutoCAD or AutoCAD Mechanical? A Productivity Study. AutoCAD Mechanical software, part of the AutoCAD family of products, saves countless hours of design and rework by automating many

More information

MET 306. Activity 8a. Mechanism Design Creo 2.0 Level 7 POINT A GROUND LINK LINK 1 LINK 2 LINK 3 POINT B 10/15/2010 1

MET 306. Activity 8a. Mechanism Design Creo 2.0 Level 7 POINT A GROUND LINK LINK 1 LINK 2 LINK 3 POINT B 10/15/2010 1 Mechanism Design Creo 2.0 Level 7 POINT A LINK 1 GROUND LINK LINK 2 LINK 3 POINT B 10/15/2010 1 Download parts ground, key, link_1, link_2, link_3 and pulley from the V:/MET_306/Activity_8_Creo drive.

More information

Pro/ENGINEER Wildfire 2.0 With Integrated Pro/MECHANICA

Pro/ENGINEER Wildfire 2.0 With Integrated Pro/MECHANICA MAE 244 : Dynamics and Strength Laboratory Fall 2005 Tutorial Material for Pro/ENGINEER Wildfire 2.0 With Integrated Pro/MECHANICA Tutorial 2: Modeling Cantilever Beam and Performing Finite Element Analysis

More information

Creo Parametric 2.0 - Advanced Primer Exercise Guide

Creo Parametric 2.0 - Advanced Primer Exercise Guide Creo Parametric 2.0 - Advanced Primer Exercise Guide Authored and published using Copyright 2009 Parametric Technology Corporation. All Rights Reserved. Copyright for PTC software products is with Parametric

More information

Creating a 3D PCB in Pro/Engineer

Creating a 3D PCB in Pro/Engineer Creating a 3D PCB in Pro/Engineer If you have any questions or comments please contact: Keith Richman Simplified Solutions Inc keith@simplifiedsolutioninc.com www.simplifiedsolutionsinc.com (410)420-7853

More information

Layouts, Plotting, Printing

Layouts, Plotting, Printing Layouts, Plotting, Printing Sacramento City College Engineering Design Technology Layouts, Plotting, Printing 1 Objectives Print and plot a drawing. Set up layouts using title blocks and viewports. Create

More information

SDC. Parametric Modeling with Creo Parametric. An Introduction to Creo Parametric 1.0. Randy H. Shih Oregon Institute of Technology

SDC. Parametric Modeling with Creo Parametric. An Introduction to Creo Parametric 1.0. Randy H. Shih Oregon Institute of Technology Parametric Modeling with Creo Parametric An Introduction to Creo Parametric 1.0 Randy H. Shih Oregon Institute of Technology SDC PUBLICATIONS www.sdcpublications.com Schroff Development Corporation Visit

More information

Solid Edge ST3 Advances the Future of 3D Design

Solid Edge ST3 Advances the Future of 3D Design SUMMARY AND OPINION Solid Edge ST3 Advances the Future of 3D Design A Product Review White Paper Prepared by Collaborative Product Development Associates, LLC for Siemens PLM Software The newest release

More information

SHOP NOTES METAL SHAPER FOR YOUR SHOP

SHOP NOTES METAL SHAPER FOR YOUR SHOP SHOP NOTES METAL SHAPER FOR YOUR SHOP A METAL SHAPER is indispensable for certain machining operations where flat surfaces must be produced within very close limits, such as machining flats on castings,

More information

Creo Parametric - Advanced Primer Exercise Guide

Creo Parametric - Advanced Primer Exercise Guide Creo Parametric - Advanced Primer Exercise Guide Authored and published using Copyright 2009 Parametric Technology Corporation. All Rights Reserved. Copyright for PTC software products is with Parametric

More information

Autodesk Inventor 2009 Certification Exam Guide

Autodesk Inventor 2009 Certification Exam Guide Autodesk Inventor 2009 Certification Exam Guide Autodesk Inventor 2009 Certification Exam Guide Preparation Guide for Autodesk Inventor 2009 Certified Associate and Autodesk Inventor 2009 Certified Professional

More information

Designing and Drawing a Sprocket Visualizing ideas through the creation of CAD solid models is a key engineering skill.

Designing and Drawing a Sprocket Visualizing ideas through the creation of CAD solid models is a key engineering skill. 05 Webster St. Hanover Massachusetts 0339 Tel. 78 878 5 Fax 78 878 6708 Designing and Drawing a Sprocket Visualizing ideas through the creation of CAD solid models is a key engineering skill. The following

More information

Sheet Metal Design. Preface What's New? Getting Started Basic Tasks Workbench Description Customizing Glossary Index

Sheet Metal Design. Preface What's New? Getting Started Basic Tasks Workbench Description Customizing Glossary Index Sheet Metal Design Preface What's New? Getting Started Basic Tasks Workbench Description Customizing Glossary Index Dassault Systèmes 1994-99. All rights reserved. Preface The V5 CATIA - Sheet Metal Design

More information

Working with Wireframe and Surface Design

Working with Wireframe and Surface Design Chapter 9 Working with Wireframe and Surface Design Learning Objectives After completing this chapter you will be able to: Create wireframe geometry. Create extruded surfaces. Create revolved surfaces.

More information

SA Training Topics. New River Kinematics, Inc.

SA Training Topics. New River Kinematics, Inc. SA Training Topics New River Kinematics, Inc. SpatialAnalyzer TM Training Topics 08-02-2007 United States copyright law protects this manual, associated software disks, algorithms, and visual content.

More information

TABLE OF CONTENTS. INTRODUCTION... 5 Advance Concrete... 5 Where to find information?... 6 INSTALLATION... 7 STARTING ADVANCE CONCRETE...

TABLE OF CONTENTS. INTRODUCTION... 5 Advance Concrete... 5 Where to find information?... 6 INSTALLATION... 7 STARTING ADVANCE CONCRETE... Starting Guide TABLE OF CONTENTS INTRODUCTION... 5 Advance Concrete... 5 Where to find information?... 6 INSTALLATION... 7 STARTING ADVANCE CONCRETE... 7 ADVANCE CONCRETE USER INTERFACE... 7 Other important

More information

SolidWorks Tutorial 3 MAGNETIC BLOCK

SolidWorks Tutorial 3 MAGNETIC BLOCK SolidWorks Tutorial 3 MAGNETIC BLOCK Magnetic Block In this exercise you will make a magnetic block. To do so, you will create a few parts, which you will assemble. You will learn the following new applications

More information

Solidworks Lesson 6 - Assembly & Part Drawings. UCF Engineering

Solidworks Lesson 6 - Assembly & Part Drawings. UCF Engineering Solidworks Lesson 6 - Assembly & Part Drawings UCF Engineering Mechanical Drawings So far we have been dealing with creating parts and assemblies in SolidWorks, however, when you go to get a part machined,

More information

Pro/ENGINEER Wildfire 5.0 Introduction to Surface Modeling

Pro/ENGINEER Wildfire 5.0 Introduction to Surface Modeling Introduction Several advanced surface types are available as listed below. Variable Section Sweep Boundary Blend Section to Surfaces Blend Surface to Surface Blend A surface is created by sweeping a single

More information

Chapter 1 What's New in Inventor 2013... 1

Chapter 1 What's New in Inventor 2013... 1 Contents Chapter 1 What's New in Inventor 2013................... 1 User Interface................................ 1 Help Experience........................... 1 Welcome screen............................

More information

Instrument and Control Systems Laboratory 1 (0-3) Laboratory experiments on topics covered in instrument and control systems.

Instrument and Control Systems Laboratory 1 (0-3) Laboratory experiments on topics covered in instrument and control systems. 01211231 Conventional and Computer-Controlled Machines 3 (3-0) Prerequisite : 01208281 Conventional machine for tools: turning, drilling, tapping, milling, grinding, cutting, punching, boring and bending;

More information

Creating Smart Models From Scan Data

Creating Smart Models From Scan Data Rapidform Tech Tip Creating Smart Models From Scan Data Related Product Version Rapidform XOR3 Goal To create a smart model from scan data. A smart model is a parametric model that uses parameters intelligently

More information

Creo Parametric Primer

Creo Parametric Primer PTC Creo Parametric - Primer Student and Academic Editions 02 Helpful hints are enclosed in red brackets or round bubbles like this one! Creo Parametric Primer THIS VERSION OF THE CREO PRIMER HAS BEEN

More information

Easy as 1, 2, 3D. Autodesk Inventor LT

Easy as 1, 2, 3D. Autodesk Inventor LT Easy as 1, 2, 3D. Autodesk Inventor LT Model Your Part Designs in 3D With parametric 3D solid part modeling in Autodesk Inventor LT software, you can model your part designs in 3D instead of simply drawing

More information

3D Design from Concept to Completion in AutoCAD

3D Design from Concept to Completion in AutoCAD 3D Design from Concept to Completion in AutoCAD David Cohn 4D Technologies AC6705-V Modeling in 3D can be easy. Learn how to use new and enhanced AutoCAD software functionality to apply your 2D AutoCAD

More information

Autodesk Fusion 360 Badge Guide: Design an F1 in Schools Trophy

Autodesk Fusion 360 Badge Guide: Design an F1 in Schools Trophy Autodesk Fusion 360 Badge Guide: Design an F1 in Schools Trophy Abstract: Gain basic understanding of creating 3D models in Fusion 360 by designing an F1 in Schools trophy. This badge may be claimed by

More information

Creating Steel Fabrication Friendly Families and Schedules with Autodesk Revit Structure

Creating Steel Fabrication Friendly Families and Schedules with Autodesk Revit Structure Creating Steel Fabrication Friendly Families and Schedules with Autodesk Revit Structure Tina Bos Herold Engineering Limited SE3048-L Once you have mastered the day-to-day use of Autodesk Revit Structure,

More information

CoCreate OneSpace.net 3D CAD Conversion

CoCreate OneSpace.net 3D CAD Conversion CoCreate 3D This document contains the individual conversion specifications Table of Contents CATIA V4 4.2 to conversion Unigraphics NX2 to conversion Pro/E Wildfire to conversion I-DEAS MS10 to conversion

More information