Armaturenwerk Hötensleben GmbH DIN / DIN 11853
|
|
|
- Alexandra Lamb
- 7 years ago
- Views:
Transcription
1 Armaturenwerk Hötensleben GmbH DIN / DIN 11853
2
3 AWH - Armaturenwerk Hötensleben GmbH Table of Contents Explosion View Page 06 Aseptic Unions DIN Form A for Tubes acc. to DIN (Series A) Page Aseptic Flange Connections DIN Form A for Tubes acc. to DIN (Series A) Page Aseptic Clamp Connections DIN Form A for Tubes acc. to DIN (Series A) Page Aseptic Unions DIN Form A for Tubes acc. to DIN (Series B) Page Aseptic Flange Connections DIN Form A for Tubes acc. to DIN (Series B) Page Aseptic Clamp Connections DIN Form A for Tubes acc. to DIN (Series B) Page Aseptic Unions DIN Form A for Tubes acc. to DIN (Series C) Page Aseptic Flange Connections DIN Form A for Tubes acc. to DIN (Series C) Page Aseptic Clamp Connections DIN Form A for Tubes acc. to DIN (Series C) Page Hygienic Unions DIN for Tubes acc. to DIN (Series A) Page Hygienic Flange Connections DIN for Tubes acc. to DIN (Series A) Page Hygienic Clamp Connections DIN for Tubes acc. to DIN (Series A) Page Hygienic Unions DIN for Tubes acc. to DIN (Series B) Page Hygienic Flange Connections DIN for Tubes acc. to DIN (Series B) Page Hygienic Clamp Connections DIN for Tubes acc. to DIN (Series B) Page Hygienic Unions DIN for Tubes acc. to DIN (Series C) Page Hygienic Flange Connections DIN for Tubes acc. to DIN (Series C) Page Hygienic Clamp Connections DIN for Tubes acc. to DIN (Series C) Page Technical Information Page The above mentioned articles are delivered with an EPDM seal. Other seal qualities are available upon request. 3
4 AWH - Armaturenwerk Hötensleben GmbH We are certified according to ISO 9001 : 2008 DIN Part Fittings made of stainless steel for the aseptic, chemical and pharmaceutical industry - Aseptic connections, standard type DIN : Aseptic Union DIN : Aseptic Flange connection DIN : Aseptic Clamp connection The gasket groove is manufactured to form A standard The German Standards DIN Part Fittings made of stainless steel for food and chemical - Hygienic connections, short type DIN : Hygienic Union DIN : Hygienic Flange connection DIN : Hygienic Clamp connection Manufactured with groove for O-Ring are described in this catalogue. 4
5 AWH - Armaturenwerk Hötensleben GmbH When all technical specifications are complied with acc. to DIN 11864, the application of the new aseptic and hygienic connections will be successful. AWH has carried out extensive optimization of production and developed exact testing mechanisms to contribute to your performance improvement. The aseptic and hygienic connections are compatible and differ in the axial length, the available materials and the assortment (the blind parts are only available as DIN version). The connections are delivered as a standard with pipe dimensions acc. to DIN series A, B and C. In the present catalogue you will fi nd a large amount of variants for the program of DIN and DIN For individual custom-made orders our competent team will gladly assist you, to accommodate your needs The aseptic and hygienic connections listed in this catalogue are certified according to 3-A Sanitary Standard Additionally, we offer seal rings made of materials, which meet the demands of the 3-A Sanitary Standard Thanks to the affiliation with the NEUMO-EHRENBERG-GROUP, AWH provides connections of the BioConnect and Connect S series for more extensive hygienic requirements. Our competent team will gladly assist you if required. 5
6 Explosion View Unions B A C D A B C D Male part O-Ring Nut Liner Flange Connections B C E A A B C D E Nut fl ange O-Ring Liner fl ange Hexagon nut Hexagon bolt D Clamp Connections D A C1 B A B Clamp nut O-Ring C2 Heavy duty clamp C1 Single pin clamp C2 Double pin clamp D Clamp liner 6
7 Notes 7
8 Aseptic Unions DIN Form A for Tubes acc. to DIN (Series A) Union DIN DN D1 D2 E L Weight [kg] Rd 28 x 1/8" 76 0, Rd 34 x 1/8" 76 0, Rd 44 x 1/6" 76 0,31 E D2 D1 Is delivered in parts! L Rd 52 x 1/6" 77 0, Rd 58 x 1/6" 88 0, Rd 65 x 1/6" 88 0, Rd 78 x 1/6" 89 0, Rd 95 x 1/6" 113 1, Rd 110 x 1/4" 117 1, Rd 130 x 1/4" 120 2,46 Male DIN DN D1 D2 E L L1 Weight [kg] Rd 28 x 1/8" , Rd 34 x 1/8" , Rd 44 x 1/6" , Rd 52 x 1/6" , Rd 58 x 1/6" , Rd 65 x 1/6" , Rd 78 x 1/6" , Rd 95 x 1/6" , Rd 110 x 1/4" , Rd 130 x 1/4" ,80 Liner DIN DN D1 D2 L L1 Weight [kg] , , , , , , , , , , , , , , , , , , , ,58 8
9 Aseptic Unions DIN Form A for Tubes acc. to DIN (Series A) Union DIN 10 32,44 112L / ,93 112L / ,34 112L / ,14 112L / ,48 112L / ,31 112L / ,85 112L / ,39 112L / ,25 112L / ,55 112L /1 associated blind screw parts page Male DIN 10 12, , , , , , , , , , Liner DIN 10 8, , , , , , , , , ,
10 Aseptic Unions DIN Form A for Tubes acc. to DIN (Series A) Nut DN D2 E L L1 Weight [kg] Rd 28 x 1/8" , Rd 34 x 1/8" , Rd 44 x 1/6" , Rd 52 x 1/6" , Rd 58 x 1/6" , Rd 65 x 1/6" , Rd 78 x 1/6" , Rd 95 x 1/6" , Rd 110 x 1/4" , Rd 130 x 1/4" ,08 O-Ring DN D S , , , ,
11 Aseptic Unions DIN Form A for Tubes acc. to DIN (Series A) Nut DIN , , , , , , , , , , O-Ring EPDM FPM PTFE DN Price for spare part /EUR Article No. Price for spare part /EUR Article No. Price for spare Surcharge/EUR part /EUR Article No. Surcharge/EUR 10 4, , ,86 11, , , , ,86 11, , , , ,86 11, , , , ,86 11, , , , ,86 11, , , , ,86 11, , , , ,32 12, , , , ,42 12, , , , ,52 12, , , , ,88 13, , , , ,18 18, , , , ,20 21, ,96 11
12 Aseptic Flange Connections DIN Form A for Tubes acc. to DIN (Series A) Flange Connection DIN DN D1 D2 LK L Weight [kg] /M8 x , /M8 x , /M8 x ,45 D2 D1 L Is delivered in parts! LK /M8 x , /M8 x , /M8 x , /M8 x , /M8 x , /M10 x , /M10 x , /M10 x , /M12 x ,82 Nut Flange DIN DN D1 D2 LK L L1 Weight [kg] x Ø 9 41,5 26 0, x Ø 9 41,5 26 0, x Ø 9 41,5 26 0, x Ø 9 41,5 26 0,27 D2 D1 L1 L LK x Ø 9 46,5 31 0, x Ø 9 46,5 31 0, x Ø 9 46,5 31 0, x Ø 9 55,5 42 0, x Ø 11 59,5 42 0, x Ø 11 59,5 42 1, x Ø 11 61,5 42 1, x Ø 14 61,5 40 2,44 Liner Flange DIN DN D1 D2 LK L L1 Weight [kg] x Ø , x Ø , x Ø , x Ø ,26 LK x Ø , x Ø , x Ø , x Ø , x Ø , x Ø , x Ø , x Ø ,38 12
13 Aseptic Flange Connections DIN Form A for Tubes acc. to DIN (Series A) Flange Connection DIN 10 44,75 113L / ,00 113L / ,50 113L / ,00 113L / ,70 113L / ,21 113L / ,40 113L / ,07 113L / ,82 113L / ,38 113L / ,58 113L / ,75 113L /1 associated blind flanges page Nut Flange DIN 10 19, , , , , , , , , , , , Liner Flange DIN 10 19, , , , , , , , , , , ,
14 Aseptic Clamp Connections DIN Form A for Tubes acc. to DIN (Series A) Clamp Connection DIN DN D1 D2 L Weight [kg] L Is delivered in parts! D1 D , , ,5 76 0, ,5 77 0, ,5 88 0, , ,5 89 0, , , ,36 Clamp Nut DIN DN D1 D2 L L1 Weight [kg] ,5 26 0, ,5 26 0, ,5 39,5 26 0, , , ,5 45,5 30 0, ,5 30 0, , , , , ,5 40 0,40 Clamp Liner DIN DN D1 D2 L L1 Weight [kg] , , , ,08 D2 D1 L1 L ,5 38,5 28 0, , , , ,5 44,5 30 0, ,5 40 0, ,5 40 0, ,35 Heavy Duty Clamp DN Weight [kg] , , ,5 0, ,5 0, ,5 0, , ,5 0, , , ,60 14
15 Aseptic Clamp Connections DIN Form A for Tubes acc. to DIN (Series A) Clamp Connection DIN 10 49,83 119L / ,83 119L / ,91 119L / ,11 119L / ,41 119L / ,74 119L / ,99 119L / ,16 119L / ,71 119L / ,18 119L /1 associated blind clamp page Clamp Nut DIN 10 11, , , , , , , , , , Clamp Liner DIN 10 10, , , , , , , , , , Heavy Duty Clamp Single Pin Double Pin Price/EUR Article No , , , , , , , , , , , , , , , , , , , , The size of the clamp is defined on the basis of the diameter of the flange D1 of the appropriate nominal width 15
16 Aseptic Unions DIN Form A for Tubes acc. to DIN (Series B) Union ISO DN D1 D2 E L Weight [kg] 8 10,3 13,5 38 Rd 28 x 1/8" 76 0, ,0 17,2 44 Rd 34 x 1/8" 76 0, ,1 21,3 54 Rd 44 x 1/6" 78 0,27 E D2 D1 Is delivered in parts! L 20 23,7 26,9 63 Rd 52 x 1/6" 78 0, ,7 33,7 70 Rd 58 x 1/6" 88 0, ,4 42,4 78 Rd 65 x 1/6" 88 0, ,3 48,3 92 Rd 78 x 1/6" 90 0, ,3 60,3 112 Rd 95 x 1/6" 114 1, ,1 76,1 127 Rd 110 x 1/4" 117 1, ,3 88,9 148 Rd 130 x 1/4" 122 2,62 Male ISO DN D1 D2 E L L1 Weight [kg] 8 10,3 13,5 Rd 28 x 1/8" , ,0 17,2 Rd 34 x 1/8" , ,1 21,3 Rd 44 x 1/6" , ,7 26,9 Rd 52 x 1/6" , ,7 33,7 Rd 58 x 1/6" , ,4 42,4 Rd 65 x 1/6" , ,3 48,3 Rd 78 x 1/6" , ,3 60,3 Rd 95 x 1/6" , ,1 76,1 Rd 110 x 1/4" , ,3 88,9 Rd 130 x 1/4" ,97 Liner ISO DN D1 D2 L L1 Weight [kg] 8 10,3 13,5 21, , ,0 17,2 27, , ,1 21,3 35, , ,7 26,9 42, , ,7 33,7 48, , ,4 42,4 54, , ,3 48,3 66, , ,3 60,3 84, , ,1 76,1 98, , ,3 88,9 118, ,85 16
17 Aseptic Unions DIN Form A for Tubes acc. to DIN (Series B) Union ISO 8 35,04 112L / ,83 112L / ,74 112L / ,39 112L / ,13 112L / ,71 112L / ,20 112L / ,14 112L / ,25 112L / ,40 112L /1 associated blind screw parts page Male ISO 8 13, , , , , , , , , , Liner ISO 8 10, , , , , , , , , ,
18 Aseptic Unions DIN Form A for Tubes acc. to DIN (Series B) Nut DN D2 E L L1 Weight [kg] Rd 28 x 1/8" , Rd 34 x 1/8" , Rd 44 x 1/6" , Rd 52 x 1/6" , Rd 58 x 1/6" , Rd 65 x 1/6" , Rd 78 x 1/6" , Rd 95 x 1/6" , Rd 110 x 1/4" , Rd 130 x 1/4" ,08 O-Ring DN D S , , , , , , , , ,
19 Aseptic Unions DIN Form A for Tubes acc. to DIN (Series B) Nut DIN , , , , , , , , , , O-Ring EPDM FPM PTFE DN Price for spare part /EUR Article No. Price for spare part /EUR Article No. Price for spare Surcharge/EUR part /EUR Article No. Surcharge/EUR 8 4, , ,86 11, , , , ,86 11, , , , ,86 11, , , , ,86 11, , , , ,86 11, , , , ,86 11, , , , ,32 12, , , , ,47 12, , , , ,57 12, , , , ,78 13, , , , ,85 15, ,91 19
20 Aseptic Flange Connections DIN Form A for Tubes acc. to DIN (Series B) Flange Connection ISO DN D1 D2 LK L Weight [kg] 8 10,3 13, /M8 x , ,0 17, /M8 x , ,1 21, /M8 x , ,7 26, /M8 x ,53 D2 D1 L Is delivered in parts! LK 25 29,7 33, /M8 x , ,4 42, /M8 x , ,3 48, /M8 x , ,3 60, /M8 x , ,1 76, /M10 x , ,3 88, /M10 x , ,7 114, /M10 x ,25 Nut Flange ISO DN D1 D2 LK L L1 Weight [kg] 8 10,3 13, x Ø 9 41,5 26 0, ,0 17, x Ø 9 41,5 26 0, ,1 21, x Ø 9 41,5 26 0,22 D2 D1 L1 L LK 20 23,7 26, x Ø 9 41,5 26 0, ,7 33, x Ø 9 46,5 31 0, ,4 42, x Ø 9 46,5 31 0, ,3 48, x Ø 9 46,5 31 0, ,3 60, x Ø 9 55,5 42 0, ,1 76, x Ø 11 57,5 42 0, ,3 88, x Ø 11 59,5 42 1, ,7 114, x Ø 11 59,5 42 1,64 Liner Flange ISO DN D1 D2 LK L L1 Weight [kg] 8 10,3 13, x Ø , ,0 17, x Ø , ,1 21, x Ø , ,7 26, x Ø ,26 LK L L1 D1 D ,7 33, x Ø , ,4 42, x Ø , ,3 48, x Ø , ,3 60, x Ø , ,1 76, x Ø , ,3 88, x Ø , ,7 114, x Ø ,60 20
21 Aseptic Flange Connections DIN Form A for Tubes acc. to DIN (Series B) Flange Connection ISO 8 45,81 113L / ,01 113L / ,51 113L / ,71 113L / ,91 113L / ,86 113L / ,22 113L / ,42 113L / ,42 113L / ,97 113L / ,55 113L /1 associated blind flanges page Nut Flange ISO 8 20, , , , , , , , , , , Liner Flange ISO 8 19, , , , , , , , , , ,
22 Aseptic Clamp Connections DIN Form A for Tubes acc. to DIN (Series B) Clamp Connection ISO DN D1 D2 L Weight [kg] L Is delivered in parts! D1 D2 8 10,3 13, , ,0 17, , ,1 21, , ,7 26,9 50,5 78 0, ,7 33,7 50,5 88 0, ,4 42, , ,3 48, , ,3 60, , ,1 76, , ,3 88, ,33 Clamp Nut ISO DN D1 D2 L L1 Weight [kg] 8 10,3 13, ,5 26 0, ,0 17, ,5 26 0, ,1 21, ,5 26 0, ,7 26,9 50,5 40,0 30 0, ,7 33,7 50,5 45,5 30 0, ,4 42, ,5 30 0, ,3 48, ,5 30 0, ,3 60, ,5 40 0, ,1 76, ,0 40 0, ,3 88, ,5 40 0,37 Clamp Liner ISO DN D1 D2 L L1 Weight [kg] 8 10,3 13, , ,0 17, , ,1 21, , ,7 26,9 50, , ,7 33,7 50, , ,4 42, , ,3 48, , ,3 60, , ,1 76, ,5 40 0, ,3 88, ,36 Heavy Duty Clamp DN Weight [kg] , , , ,5 0, ,5 0, , , , , ,59 22
23 Aseptic Clamp Connections DIN Form A for Tubes acc. to DIN (Series B) Clamp Connection ISO 8 52,43 119L / ,78 119L / ,78 119L / ,21 119L / ,26 119L / ,44 119L / ,00 119L / ,46 119L / ,96 119L / ,24 119L /1 associated blind clamp page Clamp Nut ISO 8 12, , , , , , , , , , Clamp Liner ISO 8 11, , , , , , , , , , Heavy Duty Clamp Single Pin Double Pin Price/EUR Article No. 8 23, , , , , , , , , , , , , , , , , , , , The size of the clamp is defined on the basis of the diameter of the flange D1 of the appropriate nominal width 23
24 Aseptic Unions DIN Form A for Tubes acc. to DIN (Series C) Union Inch DN D1 D2 E L Weight [kg] 1/2" 9,4 12,7 38 Rd 28 x 1/8" 76 0,28 3/4" 15,75 19,05 44 Rd 34 x 1/8" 76 0,36 1" 22,1 25,4 63 Rd 52 x 1/6" 77 0,49 E D2 D1 L 1 1/2" 34,8 38,1 78 Rd 65 x 1/6" 88 0,63 2" 47,5 50,8 92 Rd 78 x 1/6" 89 0,82 2 1/2" 60,2 63,5 112 Rd 95 x 1/6" 115 1,37 3" 72,9 76,2 127 Rd 110 x 1/4" 117 1,98 4" 97,38 101,6 148 Rd 130 x 1/4" 119 2,52 Is delivered in parts! Male Inch DN D1 D2 E L L1 Weight [kg] 1/2" 9,4 12,7 Rd 28 x 1/8" ,05 3/4" 15,75 19,05 Rd 34 x 1/8" ,07 1" 22,1 25,4 Rd 52 x 1/6" ,17 1 1/2" 34,8 38,1 Rd 65 x 1/6" 48,5 30 0,23 2" 47,5 50,8 Rd 78 x 1/6" 48,5 30 0,29 2 1/2" 60,2 63,5 Rd 95 x 1/6" ,46 3" 72,9 76,2 Rd 110 x 1/4" ,73 4" 97,38 101,6 Rd 130 x 1/4" ,82 Liner Inch DN D1 D2 L L1 Weight [kg] 1/2" 9,4 12,7 21, ,10 3/4" 15,75 19,05 27, ,11 1" 22,1 25,4 42, ,10 1 1/2" 34,8 38,1 54,9 46,5 30 0,15 2" 47,5 50,8 66,9 47,5 30 0,21 2 1/2" 60,2 63,5 84, ,36 3" 72,9 76,2 98, ,45 4" 97,38 101,6 118, ,62 24
25 Aseptic Unions DIN Form A for Tubes acc. to DIN (Series C) Union Inch 1/2" 35,54 112L /1 3/4" 39,13 112L /1 1" 41,64 112L /1 1 1/2" 48,31 112L /1 2" 57,40 112L /1 2 1/2" 85,79 112L /1 3" 120,30 112L /1 4" 153,50 112L /1 associated blind screw parts page Male Inch 1/2" 14, /4" 15, " 15, /2" 18, " 23, /2" 37, " 46, " 65, Liner Inch 1/2" 10, /4" 11, " 14, /2" 16, " 19, /2" 28, " 44, " 51,
26 Aseptic Unions DIN Form A for Tubes acc. to DIN (Series C) Nut DN D2 E L L1 Weight [kg] 1/2" Rd 28 x 1/8" ,07 3/4" Rd 34 x 1/8" ,08 1" Rd 52 x 1/6" ,18 1 1/2" Rd 65 x 1/6" ,25 2" Rd 78 x 1/6" ,33 2 1/2" Rd 95 x 1/6" ,55 3" Rd 110 x 1/4" ,80 4" Rd 130 x 1/4" ,08 O-Ring DN D S 1/2" 12 3,5 3/4" 18 3,5 1" 24 3,5 1 1/2" " /2" " "
27 Aseptic Unions DIN Form A for Tubes acc. to DIN (Series C) Nut DIN /2" 6, /4" 7, " 7, /2" 8, " 9, /2" 14, " 23, " 30, O-Ring EPDM FPM PTFE DN Price for spare part /EUR Article No. Price for spare part /EUR Article No. Price for spare Surcharge/EUR part /EUR Article No. Surcharge/EUR 1/2" 4, , ,86 11, ,32 3/4" 4, , ,86 11, ,32 1" 4, , ,86 11, ,32 1 1/2" 4, , ,86 11, ,32 2" 5, , ,32 12, ,92 2 1/2" 5, , ,52 12, ,18 3" 5, , ,52 12, ,18 4" 5, , ,88 13, ,64 27
28 Aseptic Flange Connections DIN Form A for Tubes acc. to DIN (Series C) Flange Connection Inch DN D1 D2 LK L Weight [kg] 1/2" 9,4 12, /M8 x ,33 3/4" 15,75 19, /M8 x ,39 1" 22,1 25, /M8 x ,48 D2 D1 L LK 1 1/2" 34,8 38, /M8 x ,67 2" 47,5 50, /M8 x ,85 2 1/2" 60,2 63, /M8 x ,08 3" 72,9 76, /M10 x ,62 4" 97,38 101, /M10 x ,85 Is delivered in parts! Nut Flange Inch DN D1 D2 LK L L1 Weight [kg] 1/2" 9,4 12, x Ø 9 41,5 26 0,15 3/4" 15,75 19, x Ø 9 41,5 26 0,21 1" 22,1 25, x Ø 9 41,5 26 0,24 D2 D1 L1 LK 1 1/2" 34,8 38, x Ø 9 46,5 31 0,34 2" 47,5 50, x Ø 9 46,5 31 0,44 2 1/2" 60,2 63, x Ø 9 55,5 42 0,56 3" 72,9 76, x Ø 11 57,5 42 0,83 4" 97,38 101, x Ø 11 59,5 42 1,45 L Liner Flange Inch DN D1 D2 LK L L1 Weight [kg] LK 1/2" 9,4 12, x Ø ,16 3/4" 15,75 19, x Ø ,20 1" 22,1 25, x Ø ,24 1 1/2" 34,8 38, x Ø ,33 2" 47,5 50, x Ø ,41 2 1/2" 60,2 63, x Ø ,53 3" 72,9 76, x Ø ,80 4" 97,38 101, x Ø ,41 28
29 Aseptic Flange Connections DIN Form A for Tubes acc. to DIN (Series C) Flange Connection Inch 1/2" 50,51 113L /1 3/4" 52,11 113L /1 1" 52,11 113L /1 1 1/2" 59,01 113L /1 2" 62,27 113L /1 2 1/2" 92,87 113L /1 3" 137,92 113L /1 4" 151,78 113L /1 associated blind flanges page Nut Flange Inch 1/2" 22, /4" 22, " 22, /2" 26, " 27, /2" 42, " 61, " 68, Liner Flange Inch 1/2" 21, /4" 23, " 23, /2" 26, " 27, /2" 42, " 65, " 71,
30 Aseptic Clamp Connections DIN Form A for Tubes acc. to DIN (Series C) Clamp Connection Inch DN D1 D2 L Weight [kg] 1/2" 9,4 12, ,18 3/4" 15,75 19, ,18 1" 22,1 25,4 50,5 77 0,48 D1 D2 1 1/2" 34,8 38, ,47 2" 47,5 50,8 77,5 89 0,46 2 1/2" 60,2 63, ,57 3" 72,9 76, ,74 4" 97,38 101, ,9 L Is delivered in parts! Clamp Nut Inch DN D1 D2 L L1 Weight [kg] 1/2" 9,4 12, ,5 26 0,05 3/4" 15,75 19, ,5 26 0,05 1" 22,1 25,4 50, ,09 1 1/2" 34,8 38, ,5 30 0,14 2" 47,5 50,8 77, ,17 2 1/2" 60,2 63, ,24 3" 72,9 76, ,30 4" 97,38 101, ,42 Clamp Liner Inch DN D1 D2 L L1 Weight [kg] 1/2" 9,4 12, ,04 3/4" 15,75 19, ,04 1" 22,1 25,4 50,5 38,5 28 0,08 D2 D1 L1 1 1/2" 34,8 38, ,12 2" 47,5 50,8 77,5 44,5 30 0,17 2 1/2" 60,2 63, ,5 40 0,24 3" 72,9 76, ,5 40 0,30 4" 97,38 101, ,5 40 0,44 L Heavy Duty Clamp DN Weight [kg] 1/2" 34 0,10 3/4" 34 0,10 1" 50,5 0,31 1 1/2" 64 0,31 2" 77,5 0,31 2 1/2" 91 0,34 3" 106 0,44 4" 130 0,53 30
31 Aseptic Clamp Connections DIN Form A for Tubes acc. to DIN (Series C) Clamp Connection Inch 1/2" 50,53 119L /1 3/4" 50,53 119L /1 1" 59,11 119L /1 1 1/2" 66,74 119L /1 2" 78,24 119L /1 2 1/2" 100,16 119L /1 3" 124,21 119L /1 4" 162,82 119L /1 associated blind clamp page Clamp Nut Inch 1/2" 11, /4" 11, " 16, /2" 19, " 22, /2" 34, " 45, " 60, Clamp Liner Inch 1/2" 10, /4" 10, " 15, /2" 17, " 20, /2" 33, " 44, " 59, Heavy Duty Clamp Single Pin Double Pin Price/EUR Article No. 1/2" 23, , /4" 23, , " 23, , /2" 24, , " 29, , /2" 26, , " 28, , " 37, , The size of the clamp is defined on the basis of the diameter of the flange D1 of the appropriate nominal width 31
32 Hygienic Unions DIN for Tubes acc. to DIN (Series A) and DIN (Series 2) Union DIN (short) DN D1 D2 E L Weight [kg] Is delivered in parts! Rd 28 x 1/8" 32 0, Rd 34 x 1/8" 32 0, Rd 44 x 1/6" 34 0, Rd 52 x 1/6" 42 0, Rd 58 x 1/6" 48 0, Rd 65 x 1/6" 50 0, Rd 78 x 1/6" 54 0, Rd 95 x 1/6" 62 1, Rd 110 x 1/4" 72 1, Rd 130 x 1/4" 86 2,29 Male DIN (short) DN D1 D2 E L L1 Weight [kg] Rd 28 x 1/8" , Rd 34 x 1/8" , Rd 44 x 1/6" , Rd 52 x 1/6" , Rd 58 x 1/6" , Rd 65 x 1/6" , Rd 78 x 1/6" , Rd 95 x 1/6" , Rd 110 x 1/4" , Rd 130 x 1/4" ,71 Liner DIN (short) DN D1 D2 L L1 Weight [kg] , , , , , , , , , , , , , , , , , , , ,50 Nut DN D1 D2 E L L1 Weight [kg] Rd 28 x 1/8" , Rd 34 x 1/8" , Rd 44 x 1/6" , Rd 52 x 1/6" , Rd 58 x 1/6" , Rd 65 x 1/6" , Rd 78 x 1/6" , Rd 95 x 1/6" , Rd 110 x 1/4" , Rd 130 x 1/4" ,08 32
33 Hygienic Unions DIN for Tubes acc. to DIN (Series A) and DIN (Series 2) Union DIN (short) Price/EUR Article No ,79 112K /1 28,94 112K / ,58 112K /1 31,23 112K / ,19 112K /1 31,09 112K / ,54 112K /1 33,54 112K / ,33 112K /1 35,58 112K / ,61 112K /1 37,96 112K / ,30 112K /1 42,50 112K / ,59 112K /1 59,74 112K / ,40 112K /1 88,70 112K / ,30 112K /1 125,20 112K /1 Male DIN (short) Price/EUR Article No , , , , , , , , , , , , , , , , , , , , Liner DIN (short) Price/EUR Article No. 10 5, , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Nut DIN
34 Hygienic Unions DIN for Tubes acc. to DIN (Series A) O-Ring DN D S , , , , Blind Male DIN DN D4 E SW L L1 Weight [kg] D Rd 28 x 1/8" , Rd 34 x 1/8" , Rd 44 x 1/6" , Rd 52 x 1/6" , Rd 58 x 1/6" , Rd 65 x 1/6" , Rd 78 x 1/6" , Rd 95 x 1/6" , Rd 110 x 1/4" , Rd 130 x 1/4" ,27 Blind Liner DIN DN D4 L L1 Weight [kg] D , , , , , , , , , , , , , , , , , , , ,37 34
35 Hygienic Unions DIN for Tubes acc. to DIN (Series A) O-Ring EPDM FPM PTFE DN Price for spare part /EUR Article No. Price for spare part /EUR Article No. Price for spare Surcharge/EUR part /EUR Article No. Surcharge/EUR 10 4, , ,86 11, , , , ,86 11, , , , ,86 11, , , , ,86 11, , , , ,86 11, , , , ,86 11, , , , ,32 12, , , , ,42 12, , , , ,52 12, , , , ,88 13, , , , ,18 18, , , , ,20 21, , , , , , , , , , , , Blind Male DIN 10 9, , , , , , , , , , Blind Liner DIN 35
36 Hygienic Flange Connections DIN for Tubes acc. to DIN (Series A) and DIN (Series 2) Flange Connection DIN (short) DN D1 D2 LK L Weight [kg] LK Is delivered in parts! /M8 x , /M8 x , /M8 x , /M8 x , /M8 x , /M8 x , /M8 x , /M8 x , /M10 x , /M10 x , /M10 x , /M12 x ,34 Nut Flange DIN (short) DN D1 D2 LK L L1 Weight [kg] LK x Ø 9 25,5 10 0, x Ø 9 25,5 10 0, x Ø 9 25,5 10 0, x Ø 9 25,5 10 0, x Ø 9 25,5 10 0, x Ø 9 25,5 10 0, x Ø 9 25,5 10 0, x Ø 9 25,5 10 0, x Ø 11 27,5 10 0, x Ø 11 27,5 10 1, x Ø 11 29,5 10 1, x Ø 14 29,5 8 2,20 Liner Flange DIN (short) DN D1 D2 LK L L1 Weight [kg] LK x Ø , x Ø , x Ø , x Ø , x Ø , x Ø , x Ø , x Ø , x Ø , x Ø , x Ø , x Ø ,14 36
37 Hygienic Flange Connections DIN for Tubes acc. to DIN (Series A) and DIN (Series 2) Flange Connection DIN (short) Price/EUR Article No ,21 113K /1 43,06 113K / ,21 113K /1 43,21 113K / ,21 113K /1 43,71 113K / ,31 113K /1 43,91 113K / ,01 113K /1 44,41 113K / ,81 113K /1 45,91 113K / ,37 113K /1 48,37 113K / ,67 113K /1 57,27 113K / ,72 113K /1 82,82 113K / ,18 113K /1 110,68 113K / ,68 113K /1 153,58 113K / ,85 113K /1 195,00 113K /1 Nut Flange DIN (short) Price/EUR Article No , , , , , , , , , , , , , , , , , , , , , , , , Liner Flange DIN (short) Price/EUR Article No , , , , , , , , , , , , , , , , , , , , , , , ,
38 Hygienic Flange Connections DIN for Tubes acc. to DIN (Series A) Blind Nut Flange DIN DN LK L Weight [kg] LK x Ø 9 11,5 0, x Ø 9 11,5 0, x Ø 9 11,5 0, x Ø 9 11,5 0, x Ø 9 11,5 0, x Ø 9 11,5 0, x Ø 9 11,5 0, x Ø 9 11,5 0, x Ø 11 13,5 0, x Ø 11 15,5 1, x Ø 11 15,5 1, x Ø 14 17,5 2,52 Blind Liner Flange DIN DN LK L Weight [kg] LK x Ø , x Ø , x Ø , x Ø , x Ø , x Ø , x Ø , x Ø , x Ø , x Ø , x Ø , x Ø ,12 38
39 Hygienic Flange Connections DIN for Tubes acc. to DIN (Series A) Blind Nut Flange DIN 10 17, , , , , , , , , , , , Blind Liner Flange DIN 10 15, , , , , , , , , , , ,
40 Hygienic Clamp Connections DIN for Tubes acc. to DIN (Series A) and DIN (Series 2) Clamp Connection DIN (short) DN D1 D2 L Weight [kg] Is delivered in parts! , , ,5 44 0, ,5 44 0, ,5 48 0, , ,5 49 0, , , ,11 Clamp Nut DIN (short) DN D1 D2 L L1 Weight [kg] ,5 10 0, ,5 10 0, ,5 23,5 10 0, ,5 23,5 10 0, ,5 25,5 10 0, ,5 10 0, , , , , ,5 10 0,23 Clamp Liner DIN (short) DN D1 D2 L L1 Weight [kg] , , , , , , , , , ,5 24,5 10 0, ,5 10 0, ,5 10 0, ,28 Heavy Duty Clamp DN Weight [kg] , , ,5 0, ,5 0, ,5 0, , ,5 0, , , ,60 40
41 Hygienic Clamp Connections DIN for Tubes acc. to DIN (Series A) and DIN (Series 2) Clamp Connection DIN (short) Price/EUR Article No ,83 119K /1 48,18 119K / ,83 119K /1 48,68 119K / ,21 119K /1 53,76 119K / ,06 119K /1 57,61 119K / ,91 119K /1 58,56 119K / ,24 119K /1 64,34 119K / ,54 119K /1 74,39 119K / ,46 119K /1 90,76 119K / ,31 119K /1 110,01 119K / ,18 119K /1 152,46 119K /1 Clamp Nut DIN (short) Price/EUR Article No. 10 9, , , , , , , , , , , , , , , , , , , , Clamp Liner DIN (short) Price/EUR Article No. 10 8, , , , , , , , , , , , , , , , , , , , Heavy Duty Clamp Single Pin Double Pin Price/EUR Article No , , , , , , , , , , , , , , , , , , , , The size of the clamp is defined on the basis of the diameter of the flange D1 of the appropriate nominal width 41
42 Hygienic Clamp Connections DIN for Tubes acc. to DIN (Series A) Blind Nut Clamp DIN DN L Weight [kg] , , ,5 13 0, ,5 13 0, ,5 13 0, , ,5 15 0, , , ,53 Blind Liner Clamp DIN DN L Weight [kg] ,5 0, ,5 0, ,5 11,5 0, ,5 11,5 0, ,5 11,5 0, ,5 0, ,5 13,5 0, ,5 0, ,5 0, ,5 0,53 42
43 Hygienic Clamp Connections DIN for Tubes acc. to DIN (Series A) Blind Nut Clamp DIN 10 9, , , , , , , , , , Blind Liner Clamp DIN 108, , , , , , , , , ,
44 Hygienic Unions DIN for Tubes acc. to DIN (Series B) Union ISO (short) DN D1 D2 E L Weight [kg] Is delivered in parts! 8 10,3 13,5 38 Rd 28 x 1/8" 32 0, ,0 17,2 44 Rd 34 x 1/8" 32 0, ,1 21,3 54 Rd 44 x 1/6" 34 0, ,7 26,9 63 Rd 52 x 1/6" 42 0, ,7 33,7 70 Rd 58 x 1/6" 48 0, ,4 42,4 78 Rd 65 x 1/6" 50 0, ,3 48,3 92 Rd 78 x 1/6" 54 0, ,3 60,3 112 Rd 95 x 1/6" 62 1, ,1 76,1 127 Rd 110 x 1/4" 72 1, ,3 88,9 148 Rd 130 x 1/4" 86 2,40 Male ISO (short) DN D1 D2 E L L1 Weight [kg] 8 10,3 13,5 Rd 28 x 1/8" , ,0 17,2 Rd 34 x 1/8" , ,1 21,3 Rd 44 x 1/6" , ,7 26,9 Rd 52 x 1/6" , ,7 33,7 Rd 58 x 1/6" , ,7 42,4 Rd 65 x 1/6" , ,3 48,3 Rd 78 x 1/6" , ,3 60,3 Rd 95 x 1/6" , ,1 76,1 Rd 110 x 1/4" , ,3 88,9 Rd 130 x 1/4" ,86 Liner ISO (short) DN D1 D2 L L1 Weight [kg] 8 10,3 13,5 21, , ,0 17,2 27, , ,1 21,3 35, , ,7 26,9 42, , ,7 33,7 48, , ,4 42,4 54, , ,3 48,3 66, , ,3 60,3 84, , ,1 76,1 98, , ,3 88,9 118, ,74 Nut DN D1 D2 E L L1 Weight [kg] Rd 28 x 1/8" , Rd 34 x 1/8" , Rd 44 x 1/6" , Rd 52 x 1/6" , Rd 58 x 1/6" , Rd 65 x 1/6" , Rd 78 x 1/6" , Rd 95 x 1/6" , Rd 110 x 1/4" , Rd 130 x 1/4" ,08 44
45 Hygienic Unions DIN for Tubes acc. to DIN (Series B) Union ISO (short) Price/EUR Article No. 8 31,84 112K /1 32,54 112K / ,53 112K /1 35,43 112K / ,14 112K /1 37,14 112K / ,74 112K /1 42,14 112K / ,48 112K /1 43,08 112K / ,41 112K /1 50,31 112K / ,40 112K /1 60,30 112K / ,29 112K /1 83,59 112K / ,35 112K /1 111,15 112K / ,50 112K /1 144,70 112K /1 Male ISO (short) Price/EUR Article No. 8 11, , , , , , , , , , , , , , , , , , , , Liner ISO (short) Price/EUR Article No. 8 9, , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Nut DIN
46 Hygienic Unions DIN for Tubes acc. to DIN (Series B) O-Ring DN D S , , , , , , , , , Blind Male ISO DN D4 E SW L L1 Weight [kg] D Rd 28 x 1/8" , Rd 34 x 1/8" , Rd 44 x 1/6" , Rd 52 x 1/6" , Rd 58 x 1/6" , Rd 65 x 1/6" , Rd 78 x 1/6" , Rd 95 x 1/6" , Rd 110 x 1/4" , Rd 130 x 1/4" ,27 Blind Liner ISO DN D4 L L1 Weight [kg] D4 8 21, , , , , , , , , , , , , , , , , , , ,37 46
47 Hygienic Unions DIN for Tubes acc. to DIN (Series B) O-Ring EPDM FPM PTFE DN Price for spare part /EUR Article No. Price for spare part /EUR Article No. Price for spare Surcharge/EUR part /EUR Article No. Surcharge/EUR 8 4, , ,86 11, , , , ,86 11, , , , ,86 11, , , , ,86 11, , , , ,86 11, , , , ,86 11, , , , ,32 12, , , , ,47 12, , , , ,57 12, , , , ,78 13, , , , ,85 15, , , , , , , , , , , , Blind Male ISO 8 9, , , , , , , , , , Blind Liner ISO 47
Hose and Tube Fittings Series 1-3
Embracing Challenge Hose and Tube Fittings Series 1-3 out of plastics PP, PVDF, PTFE Series 1 Special Features Corrosion resistant Gas tight Easy to handle Different connection threads Application Hose
kymanual or Automatic - it s your Choice
. kymanual or Automatic - it s your Choice ky LKB Automatic or Manual Butterfly Valve Application LKB is a sanitary automatically or manually operated butterfly valve for use in stainless steel pipe systems.
Armaturenwerk Hötensleben GmbH. AWH-Connect
Armaturenwerk Hötensleben GmbH The aseptic connection for vessels "A must for clean vessels " is the aseptic and hygienic connection for your vessels. It was developed for the strict requirements of the
Geberit Mapress Catalogue 2008 / 2009. Valid from 1 April 2008
Geberit Mapress Catalogue 2008 / 2009 Vali from 1 April 2008 Mapress Stainless Steel Page 3 Mapress CrNi Steel Page 23 Mapress Stainless Steel silicone-free Page 25 Mapress Stainless Steel Gas Page 39
Pipe threads for tubes and fittings where pressure-tight joints are not made on the threads. (requires PTFE sealing tape or liquid sealant).
Fittings for CO 2 Pipe Threads Pipe thread references quoted in this catalogue conform with the requirements specified in the latest issue and amendments of the following ISO Standards: ISO 7-1 (BS21)
Self-operated Temperature Regulators Temperature Regulator Type 1u
Self-operated Temperature Regulators Temperature Regulator Type u Application Temperature regulators for cooling installations Control thermostats for set points ) from 0 to 250 C G ½ to G or DN 5 to 50
DiwiTherm, Resistance Thermometers Model TR75, with digital Display Battery or Solar Powered
Electrical Temperature Measurement DiwiTherm, Resistance Thermometers Model TR75, with digital Display Battery or Solar Powered WIKA Data Sheet TE 60.75 Applications Machinery, plant and tank construction
S GATE KNIFE GATE VALVE WITH PNEUMATIC ACTUATOR
MAIN FEATURES The pneumatic S GATE knife gate valve is intended for the automatic shut off of pipes of the heavy fluids like slurries and powders. The main fields of application are the water treatment,
Ball valve C 16 valve ball completely moulded in place, extremely low clearance volume, high k v value
Ball valve C valve ball completely moulded in place, extremely low clearance volume, high k v value Advantage maximum safety due to valve ball completely moulded in place - ball and ball seat cannot be
HYDRAULIC PIPING STANDARD HANDBOOK. Revision 1
HYDRAULIC PIPING STANDARD HANDBOOK Revision 1 Preface We aim to fill a gap in technical literature. At this moment there are no hydraulic piping standards available which cover different pressure classes
KEYSTONE. Stainless steel hygienic butterfly valves F250 for imperial tubing F251 for metric tubing
KEYSTONE Stainless steel hygienic butterfly valves F0 for imperial tubing F for metric tubing Features Keystone technology. Quarter turn operation. Isolation or regulation control. Equal percentage characteristics.
Cable Plug acc. to DIN EN 175301-803, Form A
Cable Plug acc. to DIN EN 175301-803, Form A Complete program Contact form 18 mm Also available with LED indicator Optional 4-pin version for pressure switch or impulse valves respectively Versions with
Grey cast iron Fig. 600 Page 2. Forged steel High temperature steel Stainless steel Fig. 600/601 (Y) DN15-25 Page 4 DN40-50 Page 6
Bimetallic steam trap CONA B Bimetallic steam trap Bimetallic steam trap PN16 - with flanges (Fig. 600...1) - union with butt weld ends (Fig. 600...5) Grey cast iron Fig. 600 Page 2 Bimetallic steam trap
Filter Housing SG Standard
Page of 7 Filter Housing SG Standard The steel standard filter housings with econometer and pneumatic drain are designed for the purification of compressed air and gases. Due to the modular design of the
VersaFlow Mag 100 Electromagnetic Flow Sensor Specifications
VersaFlow Mag 100 Electromagnetic Flow Sensor Specifications 34-VF-03-08 September 2009 The Economical Solution The VersaFlow Mag 100 flow sensor is an economical solution for a wide range of applications.
RTD Temperature Probe for the Food/Pharmaceutical Industry
sales@jumo.co.uk Data Sheet 902810 Page 1/9 RTD Temperature Probe for the Food/Pharmaceutical Industry For temperatures between -50 and +250 C Protection type up to IP69 according to DIN EN 60529 (IP69K
QLM and QLD Series Three-port Control Valves
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
SITRANS F flowmeters SITRANS F M
Overview Integration The complete flowmeter consists of a flow sensor and an associated transmitter MAG 5000, 6000 or 6000 I. The flexible communication concept USM II simplifies integration and update
BWX SERIES BUTTERFLY VALVE FOR CRYOGENIC APPLICATIONS
BWX SERIES BUTTERFLY VALVE FOR CRYOGENIC APPLICATIONS The BWX series butterfly valve has been especially designed for use in cryogenic applications with high quality CrNi steel. Testing of the valve includes
2 WAY (2/2) AND 3 WAY (3/2) BRASS AND STAINLESS STEEL SOLENOID VALVES
2 WAY (2/2) AND 3 WAY (3/2) BRASS AND STAINLESS STEEL SOLENOID VALVES DIRECT ACTING Brochure N-289 SPECIFICATIONS Port Size: 1/8 and1/4 Solenoid Valve for air, oil, water and other fluids Flow Direction:
EWE Ball Valve-Type Tapping Valve. EWE Ball-Type Tapping Valve. EWE GBM Tapping Valves. for water and gas
The following overview shows the different EWE tapping valves to help you to make your choice: EWE valve tapping valve for vertical tapping with operating shut-off, for all types of pipe, with external
SISTO-16TWA/HWA/DLU. Type Series Booklet
Diaphragm Valve SISTO-16TWA/HWA/DLU PN16 DN 15-200 Maintenance-free Flanged Ends Type Series Booklet Legal information/copyright Type Series Booklet SISTO-16TWA/HWA/DLU All rights reserved. The contents
ARI-DP30 / DP32 / DP33 / DP34 / DP34T / DP34Tri / DP35 Pneumatic actuator ARI-DP Pneumatic actuator ARI-DP
ARI-DP30 / DP32 / DP33 / DP34 / DP34T / DP34Tri / DP35 Pneumatic actuator ARI-DP Pneumatic actuator ARI-DP ARI-DP30 Pneumatic actuator Page 2 ARI-DP32 ARI-DP33 Pneumatic actuator DP-Actuator Extended stem
API Flanged Safety Relief Valves Series 526 CATALOG
API Flanged Safety Relief Valves Series 26 CATALOG The-Safety-Valve.com 1 Valve finder How to find the right product group High operating to set pressure ratio, high backpressure or low total height? Yes
SUPRApak S Series Filter Housings SUPRApak Filtration For Small Batch Depth Filtration
SUPRApak S Series Filter Housings SUPRApak Filtration For Small Batch Depth Filtration FBSPAKSWASAENc SUPRApak Series SUPRApak S Series Filter Housings Technical Information SUPRApak S series filter housings
CSF16 and CSF16T Stainless Steel Steam Filters
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
Flow controller with integrated control valve (PN 16, 25, 40*) AFQM, AFQM 6 - return and flow mounting
Data sheet Flow controller with integrated control valve (PN 16, 5, 40*) AFQM, AFQM 6 - return and flow mounting Description AFQM 6 DN 40, 50 AFQM DN 65-15 AFQM DN 150-50 AFQM(6) is a self-acting flow
Order Code for GEA Tuchenhagen VESTA Sterile Valves. Type H_A 2/2 Way Seat Valve
Order Code for VESTA Sterile Valves Type H_A 2/2 Way Seat Valve engineering for a better world GEA Mechanical Equipment VESTA Sterile Valves are designed for universal use in sterile process technology.
Valves dimension of pressure (lbs) ANSI2500 ANSI1500 ANSI900 ANSI600 ANSI300 ANSI150. Inch. from 1/2 up to 6
+SBF CARBON STEEL Type: ball valve SBF ANSI B16.5 Body: round Material: A105/F316 Ball seats: from DN13 up to DN150 O-Rings: NBR, FKM, EPDM, MVQ Operating pressure: 20 Bar - 50 Bar - 100 Bar 150 Bar -
60.12. Depend-O-Lok FxE Expansion Coupling. System No. Submitted By Spec Sect Para Location Date Approved Date. DEPEND-O-LOK FxE EXPANSION COUPLING
60.1 D-O-L FxE expansion couplings are a bolted, split-sleeve design that provides for expansion and contraction at the coupled joint. These couplings are furnished with restraint rings that, when affixed
3/2-, 5/2- and 5/3-way Solenoid Valves for process pneumatics
3/2-, 5/2-5/3-way Solenoid Valves for process pneumatics Type 6518 stard High flow-rate capacity Reduced power consumption Single or manifold mounting stard Type 6518/6519 can be combined with... Stard-,
Spira-trol TM Two-port Control Valves EN Standard KE, KF and KL DN15 to DN300 and ASME Standard KEA, KFA and KLA ½" to 12"
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
NELES SOFT SEATED BUTTERFLY VALVE SERIES MAPAG BA FOR PSA PLANT ON/OFF AND CONTROL SERVICE
NELES SOFT SEATED BUTTERFLY VALVE SERIES MAPAG BA FOR PSA PLANT ON/OFF AND CONTROL SERVICE Series Mapag BA is a wafer type butterfly valve with a one piece body and soft seat.. It is specially designed
Stainless Steel Valves For the Sanitary Industries
www.swagelok.com Stainless Steel Valves For the Sanitary Industries Sanitary ball valves Manual and pneumatically actuated butterfly valves Disk and ball check valves ir blow check valves ir relief valves
Pilot Operated Pressure Reducing Valve PRV 47 (Steel) PRV47I (St.Steel)
OPTIONS: USE: AVAILABLE MODELS: Pilot Operated Pressure Reducing Valve PRV 47 (Steel) PRV47I (St.Steel) DESCRIPTION The ADCA PRV47 pilot operated pressure reducing valves are designed for use on steam,
MultiPost-AP anchorage device
MultiPost-AP anchorage device MultiPost anchorage point Type 1 Fixing on reinforced concrete with large, 360 rotating stainless steel lifting eye for the simultaneous securing of max. 2 persons. This can
SIGRAFLEX EMAIL. Properties. Applications
Multilayer sealing sheet, adhesive-free made from flexible graphite foil reinforced with stainless steel foils especially for use in PTFE envelope gaskets SIGRAFLEX EMAIL has been developed specially for
ARI-ASTRA / ASTRA Plus Combinend flow regulating valve
ARI-ASTRA - Free of maintenance combinend flow regulating valve - soft sealed (to 120 C) ARI-ASTRA Plus - Free of maintenance combinend flow regulating valve (to 175 C resp. 350 C) ARI-ASTRA / ASTRA Plus
GPD Rubber Press Seals
GPD Rubber Press Seals Leading in in ideas SYSTEM-TECHNIK GPD Rubber Press Seals Design Available with a rubber thickness of 30 mm for sealing against non-pressing water and a rubber thickness of 60 mm
DESCRIPTION. Stud Bolts for Pressure-Temperature Piping 2-1. General Purpose End-to-End Studs 2-2. Tap End Stud Bolts 2-3. Double End Stud Bolts 2-4
DESCRIPTION PAGE B7 Studs and Nuts Stud Bolts for Pressure-Temperature Piping 2-1 General Purpose End-to-End Studs 2-2 Tap End Stud Bolts 2-3 Double End Stud Bolts 2-4 Sigma Fasteners, Inc. Section 2 STUD
Puddle Flange. FRANK Puddle Flange
Puddle Flange FRANK Puddle Flange The problem Problems keep on occurring when connecting pipes during construction work. Pipes laid in the ground must be introduced into concrete walls or shafts. In many
Manual HSK clamping technology
Manual HSK clamping technology Simplicity, precision and speed as well as flexibility, safety and cost-effectiveness these are the demands placed on systems in modern production technology. The MAPAL HSK
Thermostatic actuator RAVV - for 2-way valves RAV-/8 (PN 10), VMT-/8 (PN 10), VMA (PN 16)
- for 2-way valves RAV-/8 (PN 10), VMT-/8 (PN 10), VMA (PN 16) Description RAVV can be combined with 2-way valves RAV- /8, VMT-/8 or VMA 15. Controller closes on rising temperature. There is a special
Questionnaire Pure Media Systems
1. PROJECT INFORMATION: Project Name: Client: Contact Person: Telephone / Fax N : Email: 2. BASIC INFORMATION Type of Pure Media System PW / HPW - Generation PW / HPW - Storage & Distribution System Cold
ALMATEC Series CX CX 10 CX 130
ALMATEC Series CX CX 10 CX 130 Operating and Installation Instructions ought to be studied before installing the pump The ALMATEC Maschinenbau GmbH is certified as a modern, quality-orientated enterprise
Baumann 87000 Flexsleev Sanitary Control Valve
Product Bulletin D103345X012 Baumann 87000 Flexsleev Sanitary Control Valve The Baumann 87000 control valve (figures 1 and 2) is excellent for throttling high purity liquid or gaseous media commonly found
OPTIMASS 6000 Technical Datasheet
OPTIMASS 6000 Technical Datasheet Sensor for mass flow The high performance meter for process industries Cryogenic, high temperature and high pressure options Supreme liquid and gas performance with CT
Plastic tube flowmeters Series PT/PS
Plastic tube flowmeters Variable area flowmeter for liquids and gases Low cost, excellent readability and light weight Simple installation (flanged, threaded or socket ends for solvent or fusion welding
4. Combi valves. 7. Fire hydrants. 8. Check valves. 9. Air valves
1. General company and product information 2. Flanged gate valves for water 3. Other gate valves for water 4. Combi valves 5. Service connection valves for water 6. Valves and fittings for gas 7. Fire
Stop valve with soft seal. Free of maintenance stop valve - soft sealed (to 120 C) ARI-EURO-WEDI - Straight through with flanges ARI-EURO-WEDI
ARI-EURO-WEDI Stop valve with soft seal Free of maintenance stop valve - soft sealed (to 120 C) ARI-EURO-WEDI - Fig. 070 Page 2 ARI-EURO-WEDI - Fig. 071 Page 2 ARI-EURO-WEDI - Hood valve Fig. 070 Fig.
System 8. ü www.nassmagnet.com ( +49 511 6746-0. System 8
System 8 ü www.nassmagnet.com ( +9 11 7-0 System 8 The name System 8 stands for a modular system of solenoid coils, armature systems, solenoid operators and solenoid valves. The diameter of the armatures
SERIES ASM NEOPRENE/EPMD FLANGED SINGLE SPHERE CONNECTOR CONNECTORS. Pressures to 225 PSIG (15.51 barg) Temperatures to 230ºF (110ºC)
APPLICATIONS Process Industry Weak Acids Alkalies Compressed Air Pulp & Paper MODELS ASM - Flanged Connection OPTIONS Control Rods Oil & Gas Water & Waste Pump suction & discharge Sea water Chemical lines
Sampling Solutions. Fuel and Lube Oil sampling Equipment. Convenient, Representative, Approved.
Sampling Solutions Fuel and Lube Oil sampling Equipment. Convenient, Representative, Approved. Oil Samples are used to obtain a clear indication of the operating status of your machinery. One of the most
Solenoid valves 2/2-way direct-operated Type EV210A
Solenoid valves 2/2-way direct-operated Type EV210A Features EV210A NC and NO Very compact valves for industrial application, such as control and dosage For water, oil, compressed air and similar neutral
Thermostatic actuator RAVK - for 2-way valves RAV-/8 (PN 10), VMT-/8 (PN 10), VMA (PN 16) - for 3-way valves KOVM (PN 10), VMV (PN 16)
- for 2-way valves RAV-/8 (PN 10), VMT-/8 (PN 10), VMA (PN 16) - for 3-way valves KOVM (PN 10), VMV (PN 16) Description RAVK can be combined with: - 2-way valves RAV-/8, VMT-/8, VMA, or - 3-way valves
HOSE, TUBE, AND PIPE CLAMPS
hose, tube & clamp B/W pages 24/6/08 9:28 AM Page 2 HOSE, TUBE, AND PIPE CLAMPS TABLE OF CONTENTS Introduction 3 Construction 3 Application 3 Mounting 3 Standard Duty Clamps (HRL) Arrangements 4 Dimensions
SUPRApak M Series Filter Systems SUPRApak Filtration For Medium Batch Depth Filtration
SUPRApak M Series Filter Systems SUPRApak Filtration For Medium Batch Depth Filtration FBSPAKMSAENf Technical Information SUPRApak M Series-SA filtration units are turn-key systems designed for use with
Thermostatic actuator RAVK - for 2-way valves RAV-/8 (PN 10), VMT-/8 (PN 10), VMA (PN 16) - for 3-way valves KOVM (PN 10), VMV (PN 16)
- for 2-way valves RAV-/8 (PN 10), VMT-/8 (PN 10), VMA (PN 16) - for 3-way valves KOVM (PN 10), VMV (PN 16) Description RAVK can be combined with: - 2-way valves RAV-/8, VMT-/8, VMA, or - 3-way valves
SUPRApak Multi-Stack Series Filter Housings SUPRApak Filtration For High Volume Depth Filtration
SUPRApak Multi-Stack Series Filter Housings SUPRApak Filtration For High Volume Depth Filtration FBSPAKMSWAEN Technical Information SUPRApak Multi-Stack Series-WA housings are designed for use with SUPRApak
Cylinders Series 40. Double acting, cushioned, magnetic ø160-200 - 250 (DIN/ISO 6431)
Cylinders Series 40 Double acting, cushioned, magnetic ø60-200 - 250 (DIN/ISO 643)»»» DIN/ISO 643 VDMA 24562 Rolled stainless steel rod Adjustable cushioning The cylinders Series 40 with diameters 60,
Digital inductive conductivity transmitter
Digital inductive conductivity transmitter Optimal solution for conductivity measurements in difficult fluids (polluted, dirty,...) PEEK/PPA version for CIP applications Large range of process connections
SECTION 02720 SANITARY SEWER AND STORM DRAIN SYSTEMS
SECTION 02720 SANITARY SEWER AND STORM DRAIN SYSTEMS PART 1 GENERAL 1.01 SECTION INCLUDES A. The requirements for pipe material and installation in sewer and drainage collection systems. All materials
4 Posiflow Proportional Solenoid Valves
4 Posiflow Solenoid Brass or Stainless Steel Bodies 1/4" to 1/2" NPT 2/2 Features Flow rates adjustable between 0% and 100% of rating Flow rate can also be regulated by a range of electrical inputs (sensors,
Thermostatic actuator RAVI - for 2-way valves RAV-/8 (PN 10), VMT-/8 (PN 10), VMA (PN 16) - for 3-way valves KOVM (PN 10), VMV (PN 16)
- for 2-way valves RAV-/8 (PN 10), VMT-/8 (PN 10), VMA (PN 16) - for 3-way valves KOVM (PN 10), VMV (PN 16) Description RAVI is self-acting thermostatic actuator primarily for use for temperature control
High CATALOG. LESER worldwide. Performance. Flanged Safety Relief Valves Series 441 Series 441 Full nozzle Series XXL Series 444 Series 458
LESER UK Bristol sales@leser.co.uk LESER Germany Hamburg and Hohenwestedt sales@leser.com André Ramseyer AG Flamatt, Switzerland info@ramseyer.ch LESER China Tianjin, Beijing, Shanghai and Shenzhen sales.china@leser.com
Pneumatic Control and Shut-off Butterfly Valve Pfeiffer Type BR 14b/31a and Type BR 14c/31a
Pneumatic Control and Shut-off Butterfly Valve Pfeiffer Type BR 14b/31a and Type BR 14c/31a Application Tight-closing, double eccentric butterfly valve for process engineering and plants with industrial
How to order: Please prefix the mbo part number or description with R239- example: R239-10 01 0004 9001/014
Cotter bolts according to DIN EN 22340/ISO 2340 form A without pin holes form B with pin holes Example for ordering: form A: Bolt without pin holes according to DIN EN 22340/ISO 2340, d=10mm, l=30mm, electroplated
ISORIA. Centered disc butterfly valves with AMRING elastomer liner. 240 PSI: 1½ to8. 150 PSI : 10 to 24
Type series booklet 8448.1/2-EN--US ISORIA Centered disc butterfly valves with AMRING elastomer liner 240 PSI: 1½ to8 150 PSI : 10 to 24 Design in accordance with ISO 10631 Manual, electrical, pneumatical
FlowPak TM General Application Valve 1/2-4, Class 150
FlowPak TM General Application Valve 1/2-4, Class 150 SCHERR Application Control of gases, vapours and liquids. The modular concept of valve, multi spring actuator and digital Positioner Type Logix 5si,
27 July 2009 I 54-1.65.25-63/08. Klenk GmbH Eichelstraße 15, D-88285 Bodnegg-Rotheidlen
General Technical Approval German Institute for Construction Engineering PUBLIC-LAW INSTITUTION Approval body for construction products and types of construction German Construction Industry Inspection
Fasteners and screw threads
ISO Standards Handbook: Fasteners and screw threads Volume 2: Product standards Contents Part 3 : Product standards 2001, Ed. 5, 1094 p., ISBN 92-67-10345-8 3.1 External drive hexagon head bolts and screws
Self-operated Pressure Regulators Universal Pressure Reducing Valve Type 41-23
Self-operated Pressure Regulators Universal Pressure Reducing Valve Type 41-23 Application Pressure regulators for set points from 5 mbar to 28 bar Valves in nominal sizes DN 15 to 100 Nominal pressures
SUBMITTAL 10 FEET. Cast Iron Soil Pipe Products Hubless Pipe & Fittings HUBLESS PIPE 10 FEET*
QUALITY SYSTEM SUBMITTAL Hubless Pipe & Fittings R E G I S T R AT I O N Manufacturer s T J B 10 FEET HUBLESS PIPE 10 FEET* NOM. SIZE B INSIDE DIAMETER J OUTSIDE DIAMETER 1 1/2 1.50 1.90 0.16 0.13 28.4
Thread and End Connection
www.swagelok.com and End Connection Identification Guide 2 Contents Introduction and End Connection Terminology.. 4 General Terminology... 5 Step-by-Step Identification Procedure for s and End Connections...
Grey cast iron SG iron Forged steel/ Cast steel Stainless steel Fig. 631 Page 2. High temperature steel Fig. 631 / Fig. 632 Page 8
Ball float steam trap CONA S Ball float steam trap Ball float steam trap PN16 / PN40 - with flanges (Fig. 631...1) - with screwed sockets (Fig. 631...2) - with socket weld ends (Fig. 631...3) - with butt
a Nexans company Catalogue 2014
a Nexans company Catalogue 2014 Nexans Network Solutions Div. Euromold COMPANY PRESENTATION EUROMOLD Euromold is the leading European specialised designer, manufacturer and distributor of prefabricated
Fisher CV500 Rotary Globe Control Valve
CV500 Valve D101606012 Product Bulletin Fisher CV500 Rotary Globe Control Valve The Fisher CV500 Cam Vee-Ball control valve combines the rangeability of the cammed-segmented V-notched ball, with the inherent
Pneumatic actuators The Original! Technics of the top class.
Automatic valves Actuators Accessories Pneumatic actuators The Original! Technics of the top class. Leaflet no. S1-01e-13 Table of contents Advantages and your benefits...page 3 Figure: actuator...page
Stainless steel process fittings
Page 1/6 Stainless steel process fittings Installation in pipe systems Installation in tanks and vessels Hygienic version FDA conformity of materials Probe length 120 mm 120 mm Availability of various
Micro Motion Model D and DL Coriolis Flow and Density Meters
Product Data Sheet PS-00388, Rev. F April 2013 Micro Motion Model D and DL Coriolis Flow and Density Meters Micro Motion Model D and DL sensors provide flow and density measurement for liquids, gases,
Guide rail bracket (for adjustable heads)
(for adjustable heads) Part. 209 40 ø,5 ø10,5 2 2,5 115 15 42 5 11 37 72 4 70 Code 209 / 0754 MATERIALS: Bracket made out of reinforced polyamide black colour. FEATURES: To be used with heads Part.221,
Grooved gaskets. Types of gaskets
Types of gaskets have proven extremely useful in all areas of industry, including the most demanding sealing tasks. Our grooved gaskets can be found in conventional power plants as well as in the primary
3M Housings DS Series
Lenntech info@lenntech.com Tel. +1-15-610-900 www.lenntech.com Fax. +1-15-616-89 M Housings For Filters Filter Housings, constructed of durable stainless steel, meet general-purpose industrial, chemical,
Baumann 24000 Little Scotty Bronze Control Valve
24000 Valve Product Bulletin Baumann 24000 Little Scotty Bronze Control Valve Baumann Little Scotty industrial control valves are intended for general utility service in pressure, flow, and temperature
Ultra Live Center RN. Clamping tools for clamping on machine tools. NEIDLEIN revolving ultra live centers type RN ensure: Type RN with morse taper
Ultra Live Center RN Type RN with morse taper NEIDLEIN ultra live centers are designed for employment in turning, grinding and other production machines. Owing to the application of bearing and the stable
PROGRESSIVE CAVITY PUMP KIBER KS / KST
INSTALLATION, SERVICE AND MAINTENANCE INSTRUCTIONS PROGRESSIVE CAVITY PUMP KIBER KS / KST INOXPA, S.A. c/telers, 54 Aptdo. 174 E-17820 Banyoles Girona (Spain) Tel. : (34) 972-57 52 00 Fax. : (34) 972-57
Vacuum Gate Valve DN 100 and DN 150
Vacuum Gate Valve DN 100 and DN 150 WER Dok.E.02.050_02.051 1. Introduction/Safety Instructions 2. Description 3. Technical Data 4. Installation 5. Operation 6. Maintenance Instructions 7. Spare Parts
Fisher 8580 Rotary Valve
8580 Valve Product Bulletin Fisher 8580 Rotary Valve The Fisher 8580 rotary valve offers excellent throttling and automated on-off, quarter-turn performance. An approximately linear flow characteristic
RUBBER SLEEVE KNIFE GATE VALVE
RUBBER SLEEVE KNIFE GATE VALVE The model knife gate is a wafer valve designed for a wide range of industrial applications. The double-seated design provides bi-directional shut off. The design of the valve
Linear Luminaire with LED Series EXLUX 6402/2
> Latest LED technology with a high luminous efficacy and a long service life > As pendant light fitting or side entry lamp > Central locking > All-pole disconnection by means of an N/C switch when the
Product catalogue, tank cleaning systems
Product catalogue, tank cleaning systems Aquamat Tank cleaning units Aquarex Tank cleaning systems www.hammelmann.com Contents (Navigation via Bookmarks) Tank cleaning units L XL XXL High pressure lance
CRANE. Σελίδα 1 από 2. Dimensions and Weights. Weight (kg) Size
CRANE Σελίδα από 2 DM93 Variable Orifice Double Regulating Valve PN6 Cast Iron Balancing Valve (VODRV), Flanged to BSEN 92-2 The DM93 variable orifice double regulating valves will give satisfactory performance
Compact. Performance. Safety Relief Valves Serie 437 Serie 459. The-Safety-Valve.com
Compact Performance Safety Relief Valves Serie 437 Serie 459 EXTENDED CATALOG The-Safety-Valve.com Valve Finder How to find the right Product Group High operating to set pressure ratio, high backpressure
RING JOINT SYSTEMS 207
RING JOINT SYSTEMS 07 08 Table of Contents Model R-88 Pages 10-11 Model R-88 Large Diameter Page 1 Model RH-1000 1000 PSI Coupling Page 13 Model RX-3000 3000 PSI Coupling Page 1 Model RX-3770 3770 PSI
Overview of the. measurement and control technology range
Overview of the measurement and control technology range precise innovative Precision - Made in Germany Schubert & Salzer Control Systems GmbH is a medium-sized company in the Schubert & Salzer Group with
800-348-8467 www.fittingsunlimited.com
Thread and Port Identification Guide 800-348-8467 www.fittingsunlimited.com INDEX Index... 1 Explanation of Symbols... 2 How to Measure Threads... 3-4 Metric vs English Threads... 5 North American Connections
Les Produits MURPHCO Ltée
DESCRIPTION The Murphco support clamp is an assembly made entirely of stainless steel and conceived for all sleeved roof drains. The Murphco Support Clamp is compatible with all types of Murphco* copper
Valve series MN-06 acc. to NAMUR, 3/2-way G1/4 750 Nl/min (0.762 Cv)
Valve series MN-06 acc. to NAMUR, 3/2-way G1/4 750 Nl/min (0.762 Cv) Order code Series and function 1) Plug socket see page 5.042. MN-06-310-HN-442 Standard coil 1) 441 = 12 V DC, 4.2 W 442 = 24 V DC,
Linear Luminaire for Fluorescent Lamps Series EXLUX 6001
> As wall, ceiling and pendant light fitting or side entry lamp > Version with 2 lamps: 18 W, 36 W and 58 W > Central locking > All-pole disconnection by means of an N/C switch when the lamp is opened
Assembly instructions VOSS quick connect system 246 NX
Assembly instructions VOSS quick connect system 246 NX Convenient connection, positioning and release A. Important notices Please observe before using the quick connect system VOSS quick connect system