DATA SHEET. Code: Product: E'Grid 50 R
|
|
- Aubrey Conley
- 7 years ago
- Views:
Transcription
1 Code: 8055 E'Grid 50 R Uniaxial geogrid in polyethylene Predicted to be durable for more than 120 years in soils with 1,6<pH<12,6 Tensile strength MD : >= 50 kn/m (NBN EN ISO 10319) 2% elongation MD : 12,7 kn/m (NBN EN ISO 10319) 5% elongation MD : 24,7 kn/m (NBN EN ISO 10319) Elongation at maximum load : 11 % (+/- 3 %)(NBN EN ISO 10319) Weight : > 0,3 kg/m^2 (NBN EN 9864) Information of producer Max stress resistant to 20 C : 22,7 kn/m (- 1,0 kn/m)(nbn EN ISO ) Max stress resistant to 15 C : 26 kn/m (NBN EN ISO ) Roll dimensions : 1 m x 50 m
2 Code: 8207 E'Grid 65 R Uniaxial geogrid in polyethylene Predicted to be durable for more than 120 years in soils with 1,6<pH<12,6 Tensile strength MD : >= 65 kn/m (NBN EN ISO 10319) 2% elongation MD : 16,1 kn/m (NBN EN ISO 10319) 5% elongation MD : 30,9 kn/m (NBN EN ISO 10319) Elongation at maximum load : 11 % (+/- 3 %)(NBN EN ISO 10319) Weight : > 0,4 kg/m^2 (NBN EN 9864) Information of producer Max stress resistant to 20 C : 28,9 kn/m (- 1,3 kn/m)(nbn EN ISO ) Max stress resistant to 15 C : 33,8 kn/m (NBN EN ISO ) Roll dimensions : 1 m x 50 m
3 Code: 8206 E'Grid 90 R Uniaxial geogrid in polyethylene Predicted to be durable for more than 120 years in soils with 1,6<pH<12,6 Tensile strength MD : >= 90 kn/m (NBN EN ISO 10319) 2% elongation MD : 23,7 kn/m (NBN EN ISO 10319) 5% elongation MD : 45,2 kn/m (NBN EN ISO 10319) Elongation at maximum load : 11 % (+/- 3 %)(NBN EN ISO 10319) Weight : > 0,55 kg/m^2 (NBN EN 9864) Information of producer Max stress resistant to 20 C : 37,9 kn/m (- 1,7 kn/m)(nbn EN ISO ) Max stress resistant to 15 C : 46,8 kn/m (NBN EN ISO ) Roll dimensions : 1 m x 50 m
4 Code: 8712 E'Grid 110 R Uniaxial geogrid in polyethylene Predicted to be durable for more than 120 years in soils with 1,6<pH<12,6 Tensile strength MD : >= 110 kn/m (NBN EN ISO 10319) 2% elongation MD : 29,9 kn/m (NBN EN ISO 10319) 5% elongation MD : 56,5 kn/m (NBN EN ISO 10319) Elongation at maximum load : 11 % (+/- 3 %)(NBN EN ISO 10319) Weight : > 0,7 kg/m^2 (NBN EN 9864) Information of producer Max stress resistant to 20 C : 47,2 kn/m (- 2,2 kn/m)(nbn EN ISO ) Max stress resistant to 15 C : 57,2 kn/m (NBN EN ISO ) Roll dimensions : 1 m x 50 m
5 Code: 8205 E'Grid 130 R Uniaxial geogrid in polyethylene Predicted to be durable for more than 120 years in soils with 1,6<pH<12,6 Tensile strength MD : >= 130 kn/m (NBN EN ISO 10319) 2% elongation MD : 38 kn/m (NBN EN ISO 10319) 5% elongation MD : 75,5 kn/m (NBN EN ISO 10319) Elongation at maximum load : 11 % (+/- 3 %)(NBN EN ISO 10319) Weight : > 0,8 kg/m^2 (NBN EN 9864) Information of producer Max stress resistant to 20 C : 59,6 kn/m (- 2,6 kn/m)(nbn EN ISO ) Max stress resistant to 15 C : 67,6 kn/m (NBN EN ISO ) Roll dimensions : 1 m x 50 m
6 Code: 8204 E'Grid 170 R Uniaxial geogrid in polyethylene Predicted to be durable for more than 120 years in soils with 1,6<pH<12,6 Tensile strength MD : >= 170 kn/m (NBN EN ISO 10319) 2% elongation MD : 52,5 kn/m (NBN EN ISO 10319) 5% elongation MD : 103 kn/m (NBN EN ISO 10319) Elongation at maximum load : 11 % (+/- 3 %)(NBN EN ISO 10319) Weight : > 1,1 kg/m^2 (NBN EN 9864) Information of producer Max stress resistant to 20 C : 71,4 kn/m (- 3,1 kn/m)(nbn EN ISO ) Max stress resistant to 15 C : 88,4 kn/m (NBN EN ISO ) Roll dimensions : 1 m x 50 m
7 Code: 8453 E'Grid 2020 L Geogrid made from polypropylene stretched punched sheets Predicted to be durable for more than 100 years in soils with 1,6<pH<12,6 Tensile Strength MD : >= 20 kn/m (NBN EN ISO 10319) 2% elongation MD : 7,6 kn/m (NBN EN ISO 10319) 5% elongation MD : 15,3 kn/m (NBN EN ISO 10319) Elongation at maximum load : 11,2 % (+/- 2,5 %) (NBN EN ISO 10319) Tensile Strength CMD : >= 20 kn/m (NBN EN ISO 10319) 2% elongation CMD : 7,6 kn/m (NBN EN ISO 10319) 5% elongation CMD : 15,3 kn/m (NBN EN ISO 10319) Elongation at maximum load : 9,8 % (+/- 2,1 %) (NBN EN ISO 10319) Dimension of the mesh : 66 mm x 66 mm Weight : > 200 gr/m^2 (EN 965) Standard rolls : 3,90 m x 51,3 m (MD: Machine Direction, CMD: Cross Machine Direction)
8 Code: 8132 E'Grid 2020 Geogrid made from polypropylene stretched punched sheets Predicted to be durable for more than 100 years in soils with 1,6<pH<12,6 Tensile Strength MD : >= 20 kn/m (NBN EN ISO 10319) 2% elongation MD : 7,6 kn/m (NBN EN ISO 10319) 5% elongation MD : 15,3 kn/m (NBN EN ISO 10319) Elongation at maximum load : 11,6 % (+/- 2,5 %) (NBN EN ISO 10319) Tensile Strength CMD : >= 20 kn/m (NBN EN ISO 10319) 2% elongation CMD : 7,6 kn/m (NBN EN ISO 10319) 5% elongation CMD : 15,3 kn/m (NBN EN ISO 10319) Elongation at maximum load : 10,7 % (+/- 2,1 %) (NBN EN ISO 10319) Dimension of the mesh : 40 mm x 40 mm Weight : > 200 gr/m^2 (EN 965) Standard rolls : 3,90 m x 51,3 m (MD: Machine Direction, CMD: Cross Machine Direction)
9 Code: 8454 E'Grid 3030 L Geogrid made from polypropylene stretched punched sheets KIWA-certified # K45061/02 Predicted to be durable for more than 100 years in soils with 1,6<pH<12,6 Tensile Strength MD : >= 30 kn/m (NBN EN ISO 10319) 2% elongation MD : 12 kn/m (NBN EN ISO 10319) 5% elongation MD : 24 kn/m (NBN EN ISO 10319) Elongation at maximum load : 11,2 % (+/- 2,5 %) (NBN EN ISO 10319) Tensile Strength CMD : >= 30 kn/m (NBN EN ISO 10319) 2% elongation CMD : 12,5 kn/m (NBN EN ISO 10319) 5% elongation CMD : 25 kn/m (NBN EN ISO 10319) Elongation at maximum load : 9,8 % (+/- 2,1 %) (NBN EN ISO 10319) Dimension of the mesh : 66 mm x 66 mm Weight : > 300 gr/m^2 (EN 965) Standard rolls : 3,90 m x 51,3 m (MD: Machine Direction, CMD: Cross Machine Direction)
10 Code: 7961 E'Grid 3030 Geogrid made from polypropylene stretched punched sheets Predicted to be durable for more than 100 years in soils with 1,6<pH<12,6 Tensile Strength MD : >= 30 kn/m (NBN EN ISO 10319) 2% elongation MD : 11 kn/m (NBN EN ISO 10319) 5% elongation MD : 21,6 kn/m (NBN EN ISO 10319) Elongation at maximum load : 11,6 % (+/- 2,5 %) (NBN EN ISO 10319) Tensile Strength CMD : >= 30 kn/m (NBN EN ISO 10319) 2% elongation CMD : 11 kn/m (NBN EN ISO 10319) 5% elongation CMD : 21,6 kn/m (NBN EN ISO 10319) Elongation at maximum load : 10,7 % (+/- 2,1 %) (NBN EN ISO 10319) Dimension of the mesh : 40 mm x 40 mm Weight : > 300 gr/m^2 (EN 965) Standard rolls : 3,90 m x 51,3 m (MD: Machine Direction, CMD: Cross Machine Direction)
11 Code: 8455 E'Grid 4040 L Geogrid made from polypropylene stretched punched sheets Predicted to be durable for more than 100 years in soils with 1,6<pH<12,6 Tensile Strength MD : >= 40 kn/m (NBN EN ISO 10319) 2% elongation MD : 15 kn/m (NBN EN ISO 10319) 5% elongation MD : 29 kn/m (NBN EN ISO 10319) Elongation at maximum load : 11,2 % (+/- 2,5 %) (NBN EN ISO 10319) Tensile Strength CMD : >= 40 kn/m (NBN EN ISO 10319) 2% elongation CMD : 15 kn/m (NBN EN ISO 10319) 5% elongation CMD : 29 kn/m (NBN EN ISO 10319) Elongation at maximum load : 9,8 % (+/- 2,1 %) (NBN EN ISO 10319) Dimension of the mesh : 54 mm x 54 mm Weight : > 500 gr/m^2 (EN 965) Standard rolls : 3,90 m x 30,8 m (MD: Machine Direction, CMD: Cross Machine Direction)
12 Code: 8054 E'Grid 4040 Geogrid made from polypropylene stretched punched sheets Predicted to be durable for more than 100 years in soils with 1,6<pH<12,6 Tensile Strength MD : >= 40 kn/m (NBN EN ISO 10319) 2% elongation MD : 14,5 kn/m (NBN EN ISO 10319) 5% elongation MD : 28 kn/m (NBN EN ISO 10319) Elongation at maximum load : 11,6 % (+/- 2,5 %) (NBN EN ISO 10319) Tensile Strength CMD : >= 40 kn/m (NBN EN ISO 10319) 2% elongation CMD : 15 kn/m (NBN EN ISO 10319) 5% elongation CMD : 29 kn/m (NBN EN ISO 10319) Elongation at maximum load : 10,7 % (+/- 2,1 %) (NBN EN ISO 10319) Dimension of the mesh : 30 mm x 30 mm Weight : > 500 gr/m^2 (EN 965) Standard rolls : 3,90 m x 51,3 m (MD: Machine Direction, CMD: Cross Machine Direction)
DATA SHEET. Code: 9285. Product: MacDRAIN N 105M
Code: 9285 Product: MacDRAIN N 105M 3-D structure with on one side a nonwoven geotextile and a waterproofing geomembrane on the other side Weight : 410 gr/m^2 (EN ISO 9864) Thickness @ 2 kpa : 5,0 mm (EN
More informationrhuesker HUESKER HUESKER HUESKER HUESKER HUESKERr HUESKER HUESKER HUESKER HUESKERHUES Product- Portfolio HUESKER Engineering with Geosynthetics
HUESKER Engineering with Geosynthetics rhuesker HUESKER Product- HUESKER HUESKER HUESKER HUESKERr SKER HUESKER Portfolio HUESKER HUESKER HUESKER HUESKERHUES Engineering with Geosynthetics HUESKER Synthetic
More informationHow To Test A Wrap N Drain X Dampproofing System
National Research Council Canada Institute for Research in Construction Conseil national de recherches Canada Institut de recherche en construction CCMC 13094-R &&0& EVALUATION DIVISION 07111 REPORT Issued
More informationDECLARATION OF PERFORMANCE NO. HU-DOP_TN-212-25_001
NO. HU-DOP_TN-212-25_001 Product type 212 (TN) 3,5x25 mm EN 14566:2008+A1:2009 NO. HU-DOP_TN-212-35_001 Product type 212 (TN) 3,5x35 mm EN 14566:2008+A1:2009 NO. HU-DOP_TN-212-45_001 Product type 212 (TN)
More informationCavity Drain R20 is manufactured from1.0mm thick black high density polyethylene with studs approximately 20mm high.
CI/SfB Tn6 L6813 September 2013 RIW CAVITY DRAIN R20 R20 is manufactured from1.0mm thick black high density polyethylene with studs approximately 20mm high. Other systems are available for specific uses,
More informationDECLARATION OF PERFORMANCE NO. HU-DOP_TD-25_001
NO. HU-DOP_TD-25_001 Product type TD 3,5x25 mm EN 14566:2008+A1:2009 NO. HU-DOP_TD-35_001 Product type TD 3,5x35 mm EN 14566:2008+A1:2009 NO. HU-DOP_TD-45_001 Product type TD 3,5x45 mm EN 14566:2008+A1:2009
More informationInterior Walls below and above ground OLDROYD THE ULTIMATE WATERPROOF MEMBRANE SYSTEM
P r o d u c t a p p l i c a t i o n s a n d t e c h n i c a l i n f o r m a t i o n 2 below and above ground V OLDROYD THE ULTIMATE WATERPROOF MEMBRANE SYSTEM V The flexible, fast and cost-effective answer
More informationGSI. Geosynthetic Institute GRI. 475 Kedron Avenue Folsom, PA 19033-1208 USA TEL (610) 522-8440 FAX (610) 522-8441 GII GAI GCI. GRI Test Method GM21
Geosynthetic Institute 4 Kedron Avenue Folsom, PA 133-1208 USA TEL (610) 522-8440 FAX (610) 522-8441 GEI GRI GSI GAI GCI GII Revision 4: December 17, 2012 Revision schedule on pg. 11 GRI Test Method GM21
More informationEUROPEAN AND INTERNATIONAL GEOTEXTILE STANDARDS. A SHORT GUIDE (revised version)
EUROPEAN AND INTERNATIONAL GEOTEXTILE STANDARDS A SHORT GUIDE (revised version) by Dr Fred Foubert (Centexbel), secretary to CEN/TC 189 Geosynthetics Important note: This short guide means to be an introduction
More informationTunnels & Arches OLDROYD THE ULTIMATE WATERPROOF MEMBRANE SYSTEM
P r o d u c t a p p l i c a t i o n s a n d t e c h n i c a l i n f o r m a t i o n 5 Tunnels & Arches V OLDROYD THE ULTIMATE WATERPROOF MEMBRANE SYSTEM V Create dry usable space with the original X pattern
More informationEUROPEAN AND INTERNATIONAL GEOTEXTILE STANDARDS
EUROPEAN AND INTERNATIONAL GEOTEXTILE STANDARDS A SHORT GUIDE (updated version 2014) by Dr. Fred Foubert (Centexbel), secretary to CEN/TC 189 Geosynthetics IMPORTANT NOTE: This short guide means to be
More informationArmanet BEKAERT. Armanet THE CONSTRUCTIVE IDEA. Render & plaster reinforcing mesh @@@ @@@ @@@ @@@ @@@ @@@ @@@ @@@ @@@ @@@ @@@ @@@ @@@ @@@ @@@ @@@ @@@
BEKAERT Armanet THE CONSTRUCTIVE IDEA Armanet Render & plaster reinforcing mesh Armanet Renovation Product specification Insulation Reinforcing Mesh Armanet is a heavily galvanized welded mesh used for
More informationHardened Concrete. Lecture No. 14
Hardened Concrete Lecture No. 14 Strength of Concrete Strength of concrete is commonly considered its most valuable property, although in many practical cases, other characteristics, such as durability
More informationContents. ELATECH Polyurethane belts 2. ELATECH M and V 3. ELA-flex SD Polyurethane belts 95. Polyurethane belts for conveying applications 125
ELATECH Polyurethane belts 2 Introduction to ELATECH polyurethane belts 2 Page Contents ELATECH M and V 3 Introduction 4 Tension cords 4 Products certifications 4 Mechanical and chemical properties 4 Executions
More informationConstruction. SikaProof A-08 Edge, A-12 Edge. Fully bonded FPO sheet membrane in L-shape for the SikaProof A waterproofing system. Product Description
Product Data Sheet Edition 15/10/2014 Identification no: 02 07 04 10 300 0 000002 SikaProof A Edge SikaProof A-08 Edge, A-12 Edge Fully bonded FPO sheet membrane in L-shape for the SikaProof A waterproofing
More informationPullout Testing of Xgrid PET PVC 40/20 IT and Xgrid PET PVC 80/30 IT In Sand
Xgrid PET PVC 40 30 IT and PET PVC 80 30 IT in Sand - Pullout Testing Page 1 Pullout Testing of Xgrid PET PVC 40/20 IT and Xgrid PET PVC 80/30 IT In Sand February, 2006 Submitted to: TEMA Technologies
More informationGRI Test Method GM13* Test Methods, Test Properties and Testing Frequency for High Density Polyethylene (HDPE) Smooth and Textured Geomembranes
Geosynthetic Institute 475 Kedron Avenue Folsom, PA 19033-1208 USA TEL (610) 522-8440 FAX (610) 522-8441 GEI GRI GSI GAI GCI GII GRI Test Method GM13* Revision 14: January 6, 2016 Revision schedule on
More informationQuarry & Recycling Products
Quarry & Recycling Products CONTENTS Woven mesh screens Perforated screen plates Rubber & Polyurethane screens Walkways & Steps Ordering Information Further Information PAGE 3 6 8 9 10 11 Graepel has a
More informationCable Trays Technical Instructions & Specifications
Cable Trays Technical Instructions & Specifications Products Catalogue Objective and Structure The company s main objective is the supply of quality products, with respect to: practical design increased
More informationCIVIL ENGINEERING. Sewage Pipe System. POLO-ECO plus PREMIUM 12. POLO-ECO plus PREMIUM 10
CIVIL ENGINEERING Sewage Pipe System POLO-ECO plus PREMIUM 12. POLO-ECO plus PREMIUM 10 POLO-ECO plus PREMIUM The trend-setting advancement of 3-layer technology POLO-ECO plus PREMIUM with an extra measure
More informationOLDROYD. Interior Walls. Interior Walls. below and above ground. below and above ground
S S.doc.2 12/3/03 6:26 pm Page 1 Oldroyd produce a wide range of products to combat the problems of water ingress and dampness in buildings. Other brochures are available covering the following : We have
More informationPART TWO GEOSYNTHETIC SOIL REINFORCEMENT. Martin Street Improvements, Fredonia, Wisconsin; Keystone Compac Hewnstone
GEOSYNTHETIC SOIL REINFORCEMENT Martin Street Improvements, Fredonia, Wisconsin; Keystone Compac Hewnstone DESIGN MANUAL & KEYWALL OPERATING GUIDE GEOSYNTHETIC SOIL REINFORCEMENT Keystone retaining walls
More informationMaster Panel 1000 R5 Roof
Master Panel 1000 R5 Roof Product Description The important feature of the roof elements are the easy installation procedure. The element fix exactly and pushed together without much force. Roof coverage
More informationCharacterization and Simulation of Processes
Characterization and Simulation of Processes * M. Engelhardt 1, H. von Senden genannt Haverkamp 1, Y.Kiliclar 2, M. Bormann 1, F.-W. Bach 1, S. Reese 2 1 Institute of Materials Science, Leibniz University
More informationU15. Data sheet. Force Transducer. Special features. Mounting dimensions of the connection variants. B2231-3.0 en
U15 orce ata sheet Special features - Tensile/compressive force transducer - Nominal (rated) forces 2.5 kn to 1 MN - lass 0.5 per to ISO 376 (in conjunction with K calibration certificate) - Electronic
More informationAG 9-4 ArborGard+ tree trunk protector
AG 9-4 ArborGard+ tree trunk protector Specified ArborGard is a tree trunk protector to prevent damage by string trimmers, lawn mowers and rodents. Single protector fits trunks up to 4" in diameter, join
More informationInstallation Guidelines for Segmental Block Wall. Contents 1. INTRODUCTION... 2 2. MATERIALS... 2
Johannesburg +27 (0)11 922 3300 Pinetown +27 (0)31 717 2300 Cape Town +27 (0)21 531 8110 East London +27 (0)43 727 1055 www.kaytech.co.za Installation Guidelines for Segmental Block Wall Contents 1. INTRODUCTION...
More informationHIGH PERFORMANCE PRE-APPLIED SYSTEM FOR BLIND SIDE & BELOW GRADE WATERPROOFING APPLICATIONS
BSW HIGH PERFORMANCE PRE-APPLIED SYSTEM FOR BLIND SIDE & BELOW GRADE WATERPROOFING APPLICATIONS BSW is a fully reinforced Pre-Applied system membrane designed for horizontal and vertical external blind-side
More informationFortrac. Fortrac 3D. HaTelit. Stabilenka. Robutec. Comtrac. Fornit. Duogrid. Ringtrac. NaBento. Incomat. HaTe. SoilTain
Fortrac Fortrac 3D HaTelit Stabilenka Robutec Comtrac Fornit Duogrid Ringtrac NaBento Incomat HaTe SoilTain SKER HUESKER Geosynthetics HUESKER HUESKER HUESKER HUESKERHUES Product rhuesker Overview HUESKER
More informationActivity 2.3b Engineering Problem Solving Answer Key
Activity.3b Engineering roblem Solving Answer Key 1. A force of 00 lbs pushes against a rectangular plate that is 1 ft. by ft. Determine the lb lb pressure in and that the plate exerts on the ground due
More informationTARIFF CODE and updates standard
TARIFF CODE and updates standard No HS CODE AHTN CODE PRODUCT DESCRIPTION PRODUCT TYPE STANDARDS IDENTIFIED 7207 Semi finished products of iron or non alloy steel Containing by weight less than 0.25% of
More information100 Year Service Life of Polypropylene And Polyethylene Gravity Sewer Pipes. Summary Technical Report
December 2014 100 Year Service Life of Polypropylene And Polyethylene Gravity Sewer Pipes A TEPPFA Project in cooperation with Borealis and LyondellBasell Summary Technical Report (Based on Extracts of
More informationIntegrated Manhole Ladder System
Application: This innovative product has been designed to provide safe access and egress to precast concrete manholes and inspection chambers. It can also be used within any other underground concrete
More informationStress Strain Relationships
Stress Strain Relationships Tensile Testing One basic ingredient in the study of the mechanics of deformable bodies is the resistive properties of materials. These properties relate the stresses to the
More informationThe surface roughness of the polyurethane lining is 10 times lower than cement-lined pipes.
QUALITY INSIDE When it comes to long life piping for drinking water, sewage, industrial water or gas, there is one name that continues to lead the way - ECOPUR by vonroll. Delivering precision-engineered
More informationQ-Lon foam weatherseal: for PVC, timber and aluminium applications THE WORLDS BEST WEATHERSEAL
Q-Lon foam weatherseal: for PVC, timber and aluminium applications THE WORLDS BEST WEATHERSEAL CONTENTS About Schlegel 3 Q-Lon Profiles PVC doors, windows and roller shutters 6 Timber doors and windows
More informationMaster Panel 1000 W Wall
Master Panel 1000 W Wall Product Description In order to generate an aesthethic outlook wall panels are generally produced as micro hedge. Besides, in connection points concealed screw is used which provides
More informationElastoFlake & ElastoTec
ElastoFlake & ElastoTec Relining Group 02 Revolutionally injection casting ElastoFlake, a new material from the Relining Group, is a polymer plastic mass intended for injection casting, which was developed
More informationLap Fillet Weld Calculations and FEA Techniques
Lap Fillet Weld Calculations and FEA Techniques By: MS.ME Ahmad A. Abbas Sr. Analysis Engineer Ahmad.Abbas@AdvancedCAE.com www.advancedcae.com Sunday, July 11, 2010 Advanced CAE All contents Copyright
More informationFosroc Proofex Engage
Technical Data Sheet Pre-applied waterproofing membrane conforming to the requirements of BS EN 13967:2004 and BS 8102:2009. Proofex Engage mechanically bonds to poured concrete, remaining in place if
More informationNaue GmbH&Co.KG. Quality Control and. Quality Assurance. Manual. For Geomembranes
Naue GmbH&Co.KG Quality Control and Quality Assurance Manual For Geomembranes July 2004 V.O TABLE OF CONTENTS 1. Introduction 2. Quality Assurance and Control 2.1 General 2.2 Quality management acc. to
More informationGRI Test Method GM17*
Geosynthetic Institute 475 Kedron Avenue Folsom, PA 19033-1208 USA TEL (610) 522-8440 FAX (610) 522-8441 GEI GRI GSI GAI GCI GII Revision 12: November 4, 2015 Revision schedule on pg. 11 GRI Test Method
More informationsynthetic waterproofing systems
GreeN roofing Waterproofing systems with SINTOFOIL TpO/Fpa membranes synthetic waterproofing systems Recently, green roofing systems have been attracting increasing interest because of the significant
More informationPRELIMINARY BROCHURE. Uddeholm Ramax HH
PRELIMINARY BROCHURE Uddeholm Ramax HH Uddeholm Ramax HH Uddeholm Ramax HH provides several benefits: The product offers uniform hardness in all dimensions combined with excellent indentation resistance.
More informationIntroduction. Eurocodes. Specification. Cost
Introduction Eurocodes Specification Cost Structural Eurocodes BS EN 1990 (EC0): BS EN 1991 (EC1): Basis of structural design Actions on Structures BS EN 1992 (EC2): BS EN 1993 (EC3): BS EN 1994 (EC4):
More informationMaster of Simulation Techniques. Lecture No.5. Blanking. Blanking. Fine
Master of Simulation Techniques Lecture No.5 Fine Blanking Prof. Dr.-Ing. F. Klocke Structure of the lecture Blanking Sheared surface and force Wear Blanking processes and blanking tools Errors on sheared
More informationSTRUCTURAL STEELS. Steel Grades S185 S235JR S235JRG2 S235JO S235J2G3 S235J2G4 S275JR S275JO S275J2G3 S275J2G4 S355JR S355JO S355J2G3 S355J2G4
STRUCTURAL STEELS Steel Grades S185 S235JR S235JRG2 S235JO S235J2G3 S235J2G4 S275JR S275JO S275J2G3 S275J2G4 S355JR S355JO S355J2G3 S355J2G4 S355K2G3 S355K2G4 E295 E335 E360 STRUCTURAL STEELS The unalloyed
More informationNorth American Stainless
Introduction: North American Stainless Flat Products Stainless Steel Grade Sheet 309S (S30908)/ EN1.4833 SS309 is a highly alloyed austenitic stainless steel used for its excellent oxidation resistance,
More informationHydrophobe VII., Lisbon
Hydrophobe VII., Lisbon The water repellent treatment of building materials in thermal baths Debrecen, Hungary The geothermal potential in EU János Major University of Debrecen, Faculty of Thermal baths
More informationINVESTIGATION OF MECHANICAL PROPERTIES OF POLYESTER REINFORCED WITH HEMP FIBRE (LONG FIBRES AND MAT) FOR PATELLAR IMPLANT APPLICATION
International Journal of Mechanical Engineering and Technology (IJMET) Volume 7, Issue 1, Jan-Feb 2016, pp. 154-163, Article ID: IJMET_07_01_016 Available online at http://www.iaeme.com/ijmet/issues.asp?jtype=ijmet&vtype=7&itype=1
More informationPP MASTERTM S T I F F N E S S S N 1 2 R I N G THE NEW POLYPROPYLENE SEWER PIPE SYSTEM
PP MASTERTM R I N G S T I F F N E S S S N 1 2 THE NEW POLYPROPYLENE SEWER PIPE SYSTEM The future today. PP MASTERTM The new standard in sewer construction. A powerful piece of the future: PP MASTER, a
More informationPAAM COMMERCIAL PRIVATE LIMITED
METAL PACKAGING We at Paam Group have been providing vast range of packaging products to our customers based on their preferences, needs and specifications. We provide all the materials required in metal
More informationNorth American Stainless
North American Stainless Flat Products Stainless Steel Grade Sheet 430 (S43000)/ EN 1.4016 Introduction: SS430 is a low-carbon plain chromium, ferritic stainless steel without any stabilization of carbon
More informationFormwork Direct International Ltd Phone No +44 (0151) 532 0179 Fax no +44 (0151) 523 8330 E-Mail: sales@formworkdirect.co.
Joint Fillers Formwork Direct are proud to be The UK and Ireland distributor for LJA Miers & Co. who have been responsible for many of the developments in Joint Fillers that are today accepted as common
More informationCERTIFICATE NAME OF PRODUCT MANUFACTURER PRODUCT DESCRIPTION CERTIFICATION PROCEDURE. No VTT C-6044-10 Date of issue 11.10.2010, Updated July 1, 2011
CERTIFICATE NAME OF PRODUCT No VTT C-6044-10 Date of issue 11.10.2010, Updated July 1, 2011 H-CONTROL REFLEX+ reflective insulating vapour control layer for roof and wall applications MANUFACTURER ACTIS
More informationJIS G3472 Electric Resistance Welded Carbon Steel Tubes for Automobile Structural Purposes
JIS G3472 Electric Resistance Welded Carbon Steel Tubes for Automobile Structural Purposes 1. Scope This Japanese Industrial Standard specifies the electric resistance welded carbon steel tubes, hereinafter
More informationEFFECT OF GEOGRID REINFORCEMENT ON LOAD CARRYING CAPACITY OF A COARSE SAND BED
International Journal of Civil Engineering and Technology (IJCIET) Volume 7, Issue 3, May June 2016, pp. 01 06, Article ID: IJCIET_07_03_001 Available online at http://www.iaeme.com/ijciet/issues.asp?jtype=ijciet&vtype=7&itype=3
More informationSchöck Isokorb type KST User Selection Guide. Schöck Isokorb type KST Blindtext
Blindtext Schöck Isokorb type KST User Selection Guide Schöck Ltd 2-4 High Street Kidlington, Oxfordshire OX5 2DH Tel: 01865 290 890 Fax: 01865 290 899 E-mail: design@schoeck.co.uk Web: www.schoeck.co.uk
More informationStrengthening of Large Storage Tank Foundation Walls in an Aggressive Environment by External Post-tensioning. May 7th 2013: Dominique Deschamps
Strengthening of Large Storage Tank Foundation Walls in an Aggressive Environment by External Post-tensioning May 7th 2013: Dominique Deschamps Scope of the paper Presentation of the project Cause of cracks
More informationSKER HUESKER HUESKER geogrid HUESKER HUESKER for HUESKERHUES SKER HUESKER HUESKER HUESKERHUES SKER HUESKER HUESKER HUESKER HUESKER HUESKERHUES
rhuesker HUESKER Fortrac HUESKER HUESKER HUESKER HUESKERr rhuesker Flexible HUESKER HUESKER low-extension HUESKER HUESKER HUESKERr SKER HUESKER HUESKER geogrid HUESKER HUESKER for HUESKERHUES SKER HUESKERHUES
More informationADDENDUM TO 2011 TAN SHEETS. Tempers For Aluminum And Aluminum Alloy Products Metric July 16, 2013. New and Revised Registrations
s For Aluminum And Aluminum s Metric July 1, 201 By Date Over Thru Basis 1 Ult. Yield 0 mm 201T11 Sumitomo 0/01/2012 Drawn Tube D or. A.00.00 2 1 20 * Tentative 201T11 Sumitomo 12/1/2011 Drawn Tube 22T1
More informationWorldwide tank building applications using PP-Sheets: The effect of Foaming on properties
Worldwide tank building applications using PP-Sheets: The effect of Foaming on properties Marcus Hoffmann 1, Dominic Müller 1, Marco Stallmann 1, Matt Curtis 2 1 Simona AG Teichweg 16, 55606 Kirn, Germany
More informationAutomotive Engineered Attachment Systems
Automotive Engineered Attachment Systems (TR-12721) Technical Data Sheet Acrylic Foam RT8000 Series General Information : The acrylic Foam RT8000 Series, which is made by a special process, has a superior
More information8 EXTRA LIGHT GRC SANDWICH ELEMENTS FOR ROOFING IN INDUSTRIAL BUILDINGS
8 EXTRA LIGHT GRC SANDWICH ELEMENTS FOR ROOFING IN INDUSTRIAL BUILDINGS MARICA DELLA BELLA and DIEGO CIAN Precompressi Centro Nord S.p.A., Italy SUMMARY: Secondary roofing elements, complementary to the
More informationRoofing. Sarnafil S 327-15EL. Polymeric membrane for roof waterproofing. Product Description
Roofing Product Data Sheet Edition 02.2015 Identification no: 02 09 01 01 201 0 150000 Version no. 04 Sarnafil S 327-15EL Polymeric membrane for roof waterproofing Product Description Sarnafil S 327-15EL
More informationMechanically stabilized layers in road construction
Mechanically stabilized layers in road construction Zikmund Rakowski, Jacek Kawalec Tensar International, UK, Technical University of Silesia, Poland Abstract: Effective and economical technologies are
More information\ srl High Technology Gear Reducers and Cardan Shafts CERTIFIED QUALITY SYSTEM: UNI ISO EN 9001:2008 ICIM 2779/2; IQNET N. IT-28236 UNIVERSAL SHAFT
UNIVERSAL SHAFT CAT CERTIFICATION CARDAN SHAFTS - COUPLINGS Alongside with the production of special gearboxes, our company has developed the production of Universal shafts, with the same high quality
More informationMagtel. Industrial CHANNELLING SYSTEMS AND ACCESSORIES GENERAL PRODUCTS CATALOGUE
CHANNELLING SYSTEMS AND ACCESSORIES GENERAL PRODUCTS CATALOGUE GRUPO MAGTEL Magtel is a business group, leader in the application of technology solutions in the areas of Water, Energy and Telecommunications.
More informationGRI Standard Practice GT7 * Determination of the Long-Term Design Strength of Geotextiles
Geosynthetic Institute 475 Kedron Avenue Folsom, PA 19033-1208 USA TEL (610) 522-8440 FAX (610) 522-8441 GEI GRI GSI GAI GCI GII adopted -1989 Rev. 1 1992 Rev. 2 (editorial) 2012 GRI Standard Practice
More informationRegupol Regufoam. Vibration Technology. on your wavelength. Technical Details
on your wavelength Regupol Regufoam Vibration Technology Technical Details BSW Acoustic Solutions in: ADAC Building Munich, RTL Studios Cologne, Central Bus Station Munich Table of Contents 1.1 1.1 Table
More information288 Range 24-28 tm. Technical data. www.hiab.com. Min. 4685 Max. 20970
HIAB 288 Range 24-28 tm Min. 4685 Max. 20970 2842 Technical data www.hiab.com HIAB XS 288 Contents Introduction...3 Safety Regulations...4 Disclaimer...4 Explanation of Symbols...4 Explanation of Diagrams...4
More informationNonlinear Analysis of Reinforced Concrete Structures in Design and Structural Assessment
1 Nonlinear Analysis of Reinforced Concrete Structures in Design and Structural Assessment Jan Cervenka Červenka Consulting, Prague, Czech Republic Outline: Červenka Consulting - Computer simulation (virtual
More informationL4. Pipes Materials and Loads
The Islamic University of Gaza- Civil Engineering Department SanitaryEngineering- ECIV 4325 L4. Pipes Materials an Loas Base on Dr. Fahi Rabah lecture notes Pipes Materials an loas Materials use for pipes:
More informationStabilenka HUESKER. and Separation. Engineering with Geosynthetics SKER HUESKER HUESKER HUESKER HUESKERHUES
HUESKER Engineering with Geosynthetics rhuesker HUESKER HUESKER HUESKER HUESKER HUESKERr rhuesker HUESKER Woven HUESKER HUESKER Fabrics HUESKER HUESKERr SKER HUESKER HUESKER HUESKER HUESKERHUES rhuesker
More informationCOMMERCIAL ITEM DESCRIPTION CUSHIONING MATERIAL, PACKAGING, CLOSED CELL FOAM PLANK
[METRIC] A-A-59136 28 OCTOBER 1997 SUPERSEDING PPP-C-1752D(3) 1 FEBRUARY 1993 COMMERCIAL ITEM DESCRIPTION CUSHIONING MATERIAL, PACKAGING, CLOSED CELL FOAM PLANK The General Services Administration has
More informationInsulated Roof & Wall Panels. Product Data Sheet. Trapezoidal Insulated Roof Panels KS1000 RW
Insulated Roof & Wall Panels Trapezoidal Insulated Roof Panels KS1000 RW Overview Kingspan roof panel systems present a superior system compared to conventional multi-part site assembled systems. They
More informationFDM Material Properties
Details FDM Standard lead time: Layer thickness: Standard accuracy: Surface finish: Maximum part dimensions: Capacity: Materials: 4-5 days 0.25 mm (for ABS, ABSi) 0.18 0.25 mm (for ABS-M30, ABS-M30i, PC,
More informationMICRO PLASTICS MOLDED NYLON 6/6 FASTENERS MECHANICAL TEST DATA - UNC - UNF SECTION
MICRO PLASTICS MOLDED NYLON 6/6 FASTENERS MECHANICAL TEST DATA - UNC - UNF Nylon 6/6 meets MIL-M20693B "A" Type 1, LP410A, and ASTM D789-66 Type 1, GDE 2 All test performed per ASTM specifications. Parts
More informationADDENDUM TO 2011 TAN SHEETS Tempers For Aluminum And Aluminum Alloy Products Metric Edition June, 2014. New and Revised Registrations
s For Aluminum And Aluminum s Metric Edition June, 201 By Date Over Thru Basis 1 Ult. Yield 201T11 Sumitomo 0/01/2012 Drawn Tube 0 D or. A.00.00 2 1 20 * Tentative 201T11 Sumitomo 12/1/2011 Drawn Tube.00.00
More informationSheet metal operations - Bending and related processes
Sheet metal operations - Bending and related processes R. Chandramouli Associate Dean-Research SASTRA University, Thanjavur-613 401 Table of Contents 1.Quiz-Key... Error! Bookmark not defined. 1.Bending
More informationDouble Coated Urethane Foam Tapes
3 Double Coated Urethane Foam Tapes 4004 4008 4016 4026 4032 4052 4056 4085 Technical Data April, 2009 Product Description 3M Double Coated Urethane Foam Tapes are conformable foams that offer high shear
More informationSeamless stainless tubes for hydraulic and instrumentation systems
Seamless stainless tubes for hydraulic and instrumentation systems stock assortment integrated production technical knowledge network of sales and service Reduce your lifecycle costs When selecting tubes
More informationIntroduction. ε 1 θ=55 ε 2. Localized necking Because ν=0.5 in plasticity, ε 1 =-2ε 2 =-2ε 3. ε 3,ε 2
SHEET METALWORKING 1. Cutting Operation 2. Bending Operation 3. Drawing 4. Other Sheet-metal Forming 5. Dies and Presses 6. Sheet-metal Operation 7. Bending of Tube Stock 1 Introduction Cutting and forming
More informationCOMMERCIAL ITEM DESCRIPTION PACKAGING MATERIAL, SHEET
[METRIC] A-A-59135 28 OCTOBER 1997 SUPERSEDING PPP-C-1752D(3) 1 FEBRUARY 1993 COMMERCIAL ITEM DESCRIPTION PACKAGING MATERIAL, SHEET The General Services Administration has authorized the use of this commercial
More informationMaterial data sheet. EOS StainlessSteel GP1 for EOSINT M 270. Description, application
EOS StainlessSteel GP1 for EOSINT M 270 A number of different materials are available for use with EOSINT M systems, offering a broad range of e-manufacturing applications. EOS StainlessSteel GP1 is a
More informationAnalysis of Slotted Counter Sunk (35NCD16 Steel) Aerospace Fasteners
Analysis of Slotted Counter Sunk (35NCD16 Steel) Aerospace Fasteners A R Abelin Roy Deptt. of ME, Govt. Engineering College, Thrissur, India Christopher Solomon S MMD VSSC, ISRO Thiruvananthapuram, India
More informationNumerical Analysis of Independent Wire Strand Core (IWSC) Wire Rope
Numerical Analysis of Independent Wire Strand Core (IWSC) Wire Rope Rakesh Sidharthan 1 Gnanavel B K 2 Assistant professor Mechanical, Department Professor, Mechanical Department, Gojan engineering college,
More informationWelded Fabric. The CARES Guide to Reinforcing Steels Part 5. Installation of welded fabric on a major contract. 1.0 Introduction
Welded Fabric 1.0 Introduction Welded fabric, often referred to as mesh, is a machine welded grid arrangement of reinforcing bars or wires. It is covered by British Standard BS4483. This was revised in
More information40 years of quality & service. SINTEPLAST, S.A. de C.V. TARPAULIN
SINTEPLAST, S.A. de C.V. TARPAULIN Econoplast Tarpaulin 9 x 6 1000 D. Specially designed for outdoor uses. Its excellent physical and mechanical proprieties make it one of the most versatile materials.
More informationGuiding Principles for the contents of Particular Materials Appraisals (Version approved at the WGP on 21 November 2006)
PE- 03-28 - rev 5 21 November 2006 Page 1 of 5 Guiding Principles for the contents of Particular Materials Appraisals (Version approved at the WGP on 21 November 2006) Introduction A Particular Material
More informationRAMAX S Prehardened stainless holder steel
T O O L S T E E L F A C T S RAMAX S Prehardened stainless holder steel Wherever tools are made Wherever tools are used This information is based on our present state of knowledge and is intended to provide
More informationPIEZOELECTRIC FILMS TECHNICAL INFORMATION
PIEZOELECTRIC FILMS TECHNICAL INFORMATION 1 Table of Contents 1. PIEZOELECTRIC AND PYROELECTRIC EFFECTS 3 2. PIEZOELECTRIC FILMS 3 3. CHARACTERISTICS PROPERTIES OF PIEZOELECTRIC FILMS 3 4. PROPERTIES OF
More informationOil and Gas Containment Systems
FRONT COVER Oil and Gas Containment Systems FACING THE CHALLENGE Oil and natural gas production is one of the most hazardous and complex industries in the world. In addition to typical day-to-day business
More informationHighly flexible couplings
Construction and operation 8.03.00 Instructions for installation 8.03.00 Types of stress 8.04.00 Diagrams for static deformation of the coupling ring 8.05.00 Coupling size 8.07.00 Examples of combinations
More informationThe assessment is described in the following pages which form integral parts of this certificate, which should be read in its entirety.
Cl/SfB (13.1) Ly (L2) BRE CERTIFICATION LTD CERTIFICATE OF ASSESSMENT PRODUCT Powerbase RB 340 and RB 370 Radon Resistant Membranes CERTICATE NO. 100/03 ISSUED: MARCH 03 REISSUED: NOVEMBER 07 SUPPLIED
More informationApril 2008. Report Prepared By: Phil Brindley, Dr Ruth Goodridge, Mark East & Prof Richard Hague Loughborough University, Loughborough, UK
Stratasys 4mc System Material Properties: Preliminary Investigation into the Mechanical Properties of Stratasys Polycarbonate & M3 ABS materials April 28 Report Prepared By: Phil Brindley, Dr Ruth Goodridge,
More information13. Tagung Zahnriemengetriebe am Institut für Feinwerktechnik und Elektronik-Design der TU Dresden
am Institut für Feinwerktechnik und Elektronik-Design der TU Dresden Gerhard Fickenwirth (Gates Mectrol, Inc., Salem, NH, USA) PosiClean Belt - The Conveyor Belt with Timing Belt Technology 1. Introduction
More information