BALL VALVE AL 33 - Masterstar

Transcription

1 Ref..6_UK04/0. Telephone LL VLV L 33 Masterstar esign The L 33 is a threepiece ball valve made of stainless steel or carbon steel. The valve has an antistatic, blowoutproof stem and a fullyfloating ball, and is iresafe approved. The valves are provided with mounting plate for actuator in accordance with ISO 5. The L 33 is available in sizes with full bore and with reduced bore, pressure ratings PN 660 with threaded and welding connections (PN 6 with flanged connections). Temperature range of to +4, depending on the seal material. Pressure/Temperature L 33 ar 0 S 90 S 60 S3 S4 30 S G G G Material of seat seal in standard version S = PT + % carbon + S S S S3 S4 S5 ull bore 5 L 33: Reduc G G G G3 ull bore L 33: 5 00 Pressure/Temperature seat seal material to special order: (ode designation in accordance with the Ordering key) R = PT + 5% glass fibre Reinforced PT with 5% glass fibre fill for higher pressures and temperatures than pure PT. Temp. range: 60 to +30. = LRIN This LRIN seal has excellent dimensional stability to resist extrusion at high pressures. Temp. range: to +95. = VSPL The VSPL seal is excellent for high temperatures and high pressures and has good resistance to chemicals. Temp. range: to G = 00% graphite material for seat seals and body seals. Selflubricating. xcellent for high or low temperature applications, but at low pressures. pplications: Steam and lowtemperature cryogenic service, although not for oxygen. Temp. range: to +4. K = KL KL seal for low temperatures. This material is similar to PT but has better mechanical properties and good resistance to nitric acid, hydrofluoric acid and liquid oxygen. pplications: ryogenic service and high pressures. Temp. range: to +. T = 00% PT xcellent resistance to chemicals. Minimizes the torque. Used in the food industry and for vacuum. Temp. range: 0 to +0. or further information, see the separate sheet entitled Pressure/ Temperature graph.

2 Ref..6_UK04/0. Telephone LL VLV L 33 Masterstar Parts/Material specifications L 33 (with encapsulated seat on the end piece) ** MÄRKRIK 7** ** 4** 6 3* 4 * 7* 5** 6 3 9* 0* * * 9** 05 N 05 N * * 0* 9* 3 6 L 33 Standard versions Item Quant. Part Handle ody arbon steel Galvanized and plasticcoated carbon steel ody Stainless steel Galvanized and plasticcoated carbon steel (Stainless steel 36 to special order) ** 3 4** 5** 6 7* * 9** 0* * 3 4 5* 6 7** ** 9** or 6+6 or or 6+6 or + Handle retaining nut () Locknut () Spring washer ntistatic stem Packing ring Thrust washer Oring all ody nd piece ntistatic spring unit in stem ody bolt (see rrangement of bolts ) olts Lockwasher Secondary body seal admiumplated carbon steel Stainless steel 30 PT Viton PT + % carbon + PT + % carbon + arbon steel 05 arbon steel 05 Stainless steel 93 7 arbon steel PT or graphite Stainless steel 30 PT PT PT + % carbon + PT + % carbon + Stainless steel 93 arbon steel PT or graphite * Recommended spare parts after years of service ** Recommended spare parts after 5 years of service

3 Ref..6_UK04/0. Telephone LL VLV L 33 Masterstar imensions L 33 L 33 Threaded and welding connections PN 660 ull Red. bore bore * * 305* imensions in mm. s in kg for full bore. L 33 Threaded and weld ends (for appearance of the weld preparations, see imensions) L 33 xtended weld ends PN 660 ull Red. bore bore , imensions in mm. s in kg. Integrated weld ends are standard on the L 33 from inclusive with full bore and with reduced bore. L 33 xtended weld ends L 33 langed connections PN 6 ull bore Reduced bore imensions in mm. s in kg. L 33 langed connections 3

4 Ref..6_UK04/0. Telephone LL VLV L 33 Masterstar imensions Mounting flange according to ISO 5 N H I O N H I O 05 M 05 N M 05 M M L 05 N L 00 ull Reduced H I L M N O ISO bore bore 5 M x M5 04 M0 x M M0 x M M0 x M5 03 M x M ull Reduced H I L M N O ISO bore bore 5 M x M5 04 M5 x M6 05 M5 x M6 05 M5 x, M6 05 M x, ,0 M M4 x M 07 rrangement of bolts 4+4 bolts: 5 reduced bore full bore imensions Weld ends arbon steel y i Stainless steel 343 y i Kv factor (Kv = Water flow in m 3 /h at a pressure drop of bar and a temperature of ) Svetsändar.6 i y ull Reduced 6+6 bolts: reduced bore full bore + bolts: 00 reduced bore full bore

5 Ref..6_UK04/0. Telephone LL VLV L 33 Masterstar Ordering key imension ore = ull bore = Reduced bore Valve type = L 33 ody/all 3, 6 = Standard = arbon steel ( 05)/Monel 3 = arbon steel/ Stainless steel ( 05/36) 6 = Stainless steel/ Stainless steel ( 36/36) = Monel/Monel S = Standard for L 33 S = PT + % carbon + = LRIN = VSPL G = 00% graphite K = KL R = PT + 5% glass fibre T = 00% PT G = Standard S = PT + % carbon + G = 00% graphite R = PT + 5% glass fibre T = 00% PT S = Standard R = PT + 5% glass fibre V = Viton Oring G = 00% graphite H = Hydrin Oring T = 00% PT S = PT + % carbon + onnection type Threaded Welding xtended weld end langed Ordering example xample L 33: 6 S G S Threaded Size ore Valve type ody/all onnection (specify in text) pprovals Type inspected the Swedish Plant Inspectorate has awarded the L 33 type approval certificates No. S , 9435, 9436 in pressure ratings up to and including PN 60. Type approved the Swedish Gas ssociation has approved the L 33 for town gas, natural gas and LP gas. Reg. No. G354. iresafe approved pproved tests carried out on L 33 in accordance with ritish Standard Institute S 55 part :97 class 0 0 lb. ctuator Rating The information concerning pneumatic actuators is based on an air pressure of 5.5 bar with a safety factor of 30%. or control, choose an actuator with a margin of safety of at least %. Max. working pressure: 0 bar. mbient temperature: 30 to + or technical information concerning actuators, solenoid valves, end position indication, positioners, etc. see the section entitled ctuators. Variants/Options Versions for low temperatures, extended stem, lockable design, NSI flanges, etc. are available to special order. Installation and maintenance The valves shall be installed in the open position. Spotweld the valve in the required position, and then release and remove all bolts. Lift the valve body out of the pipework. Protect the ball and the PT seals from weld spatter by covering them with a piece of cloth or the like. Weld the valve in position. Leave the valve to cool down before refitting the valve body. Note. or sizes from inclusive with full bore and from inclusive with reduced bore, the valve should be installed as a unit, i.e. the valve body must not be removed when the valve ends are welded to the pipework. all valve L 33 oubleacting oubleacting Singleacting Singleacting lectric L 7 L 79 L 77 L 79 ull Reduced Opening Type Nm Type Nm Type Nm Nm Type Nm Nm Type Nm bore bore torque, towards towards towards towards Nm 90 o 0 o 90 o 0 o SR 0SR SR 0SR SR 3 SR SR 3 SR SR 75 4 SR SR SR SR SR SR 5 35SR SR 5 35SR SR 30 SR Head Office xel Larsson Maskinaffär, Truckvägen, P.O. ox 5, S94 Upplands Väsby (Stockholm), Sweden. Telephone: ax: mail: info@axellarsson.se esign and specifications subject to change without prior notice.