FREE CUTTING STEELS.»11SMn30»11SMn37»11SMnPb30»11SMnPb37»36SMnPb14»38SMn28»44SMn28»46S20
|
|
- Maria Miles
- 7 years ago
- Views:
Transcription
1
2 FREE CUTTING STEELS»11SMn30»11SMn37»11SMnPb30»11SMnPb37»36SMnPb14»38SMn28»44SMn28»46S20
3 11SMn30 High machinability steel not destined to heat treatment (W. NR ) CHEMICAL COMPOSITION: (heat analysis according to the EN standard) *MECHANICAL FEATURES: (according to the EN standard) rolled + peeled rolled (+SH ) HB hardness Rp 0, > > > > * Delivery condition: as rolled C % Si % Mn % P % S % FROM - - 0,90-0,27 TO 0,14 0,05 1,30 0,11 0,33 Machinability: This steel grade is marked by a good machinability on machine tools and by an easy fragmentation of chips. Due to the high sulphur and phophorus content free-cutting steels not destined to heat treatment are not generally recoended for welding. Notes: UNI 4838 CF 9 SMn 28 DIN SMn28 AFNOR S 250 ISO SMn 28 EN SMn30
4 11SMn37 High machinability steel not destined to heat treatment (W. NR ) CHEMICAL COMPOSITION: (heat analysis according to the EN standard) C % Si % Mn % P % S % FROM - - 1,00-0,34 TO 0,14 0,05 1,50 0,11 0,40 *MECHANICAL FEATURES: (according to the EN standard) Rolled + peeled rolled (+SH ) HB hardness Rp 0, > > > > * Delivery condition: as rolled Machinability : This steel grade is marked by a good machinability on machine tools and by an easy fragmentation of chips. Weldability : Due to the high sulphur and phophorus content free-cutting steels not destined to heat treatment are not generally recoended for welding. Notes: UNI 4838 CF 9 SMn 36 DIN SMn36 AFNOR S 300 ISO SMn 35 EN SMn37
5 11SMnPb30 High machinability steel not destined to heat treatment (W. NR ) CHEMICAL COMPOSITION: (heat analysis according to the EN standard) C % Si % Mn % P % S % Pb % FROM - - 0,90-0,27 0,20 TO 0,14 0,05 1,30 0,11 0,33 0,35 *MECHANICAL FEATURES: (according to the EN standard) rolled + peeled rolled (+SH ) HB hardness Rp 0, > > > > * Delivery condition: as rolled Machinability: This steel grade is marked by a good machinability on machine tools and by an easy fragmentation of chips. In order to further improve its machinability, this steel grade can be supplied upon request with Te (tellurium) and Bi (bismuth) addition. Due to the high sulphur and phophorus content free-cutting steels not destined to heat treatment are not generally recoended for welding. Notes: CORRESPONDENCE WITH OTHER STANDARDS (purely as an indication ) : UNI 4838 CF 9 SMnPb 28 DIN SMnPb28 AFNOR S 250 Pb ISO SMnPb 28 EN SMnPb30
6 11SMnPb37 High machinability steel not destined to heat treatment (W. NR ) CHEMICAL COMPOSITION: (heat analysis according to the EN standard) C % Si % Mn % P % S % Pb % FROM - - 1,00-0,34 0,20 TO 0,14 0,05 1,50 0,11 0,40 0,35 *MECHANICAL FEATURES: (according to the EN standard) rolled + peeled rolled (+SH ) HB hardness Rp 0, > > > > * Delivery condition: as rolled PROPERTIES: Machinability: This steel grade is marked by a good machinability on machine tools and by an easy fragmentation of chips. In order to further improve its machinability, this steel grade can be supplied upon request with Te (tellurium) and Bi (bismuth) addition. Due to the high sulphur and phophorus content free-cutting steels not destined to heat treatment are not generally recoended for welding. Notes: UNI 4838 CF 9 SMnPb 36 DIN SMnPb36 AFNOR S 300 Pb ISO SMnPb 35 EN SMnPb37
7 36SMnPb14 High machinability steel for direct hardening (W. NR ) CHEMICAL COMPOSITION: (heat analysis according to the EN standard) C % Si % Mn % P % S % Pb % FROM 0,32-1,30-0,10 0,15 TO 0,39 0,40 1,70 0,06 0,18 0,35 *MECHANICAL FEATURES: (according to the EN standard) rolled + peeled rolled (+SH ) HB hardness Rp 0, > > > > * Delivery condition: as rolled Machinability : This steel grade generally shows a quite good machinability on machine tools; machinability decreases with the increase of carbon, silicon and manganese content. Weldability : Due to the high sulphur and phophorus content free-cutting steels for direct hardening are not recoended for welding. Notes UNI 4838 CF 35 SMnPb 10 AFNOR MF 6 +Pb EN SMnPb14
8 38SMn28 High machinability steel for direct hardening (W. NR ) CHEMICAL COMPOSITION: (heat analysis according to the EN standard) C % Si % Mn % P % S % FROM 0,35-1,20-0,24 TO 0,40 0,40 1,50 0,06 0,33 *MECHANICAL FEATURES: (according to the EN standard) rolled + peeled rolled (+SH ) HB hardness Rp 0, > > > > * Delivery condition: as rolled PROPERTIES: Machinability : This steel grade generally shows a quite good machinability on machine tools; machinability decreases with the increase of carbon, silicon and manganese content. Weldability : Due to the high sulphur and phophorus content free-cutting steels for direct hardening are not recoended for welding. Notes UNI 4838 / AFNOR / EN SMn28
9 44SMn28 High machinability steel for direct hardening (W. NR ) CHEMICAL COMPOSITION: (heat analysis according to the EN standard) C % Si % Mn % P % S % FROM 0,40-1,30-0,24 TO 0,48 0,40 1,70 0,06 0,33 *MECHANICAL FEATURES: (according to the EN standard) rolled + peeled rolled (+SH ) HB hardness Rp 0, > > > > * Delivery condition: as rolled PROPERTIES: Machinability : This steel grade generally shows a quite good machinability on machine tools; machinability decreases with the increase of carbon, silicon and manganese content. Weldability : Due to the high sulphur and phophorus content free-cutting steels for direct hardening are not recoended for welding. Notes UNI 4838 CF 44 SMn 28 AFNOR MF 6.3 ISO SMn 28 EN SMn28
10 46S20 High machinability steel for direct hardening (W. NR ) CHEMICAL COMPOSITION: (heat analysis according to the EN standard) C % Si % Mn % P % S % FROM 0,42-0,70-0,15 TO 0,50 0,40 1,10 0,06 0,25 *MECHANICAL FEATURES: (according to the EN standard) rolled + peeled rolled (+SH ) HB hardness Rp 0, > > > > * Delivery condition: as rolled Machinability : This steel grade generally shows a quite good machinability on machine tools; machinability decreases with the increase of carbon, silicon and manganese content. Weldability : Due to the high sulphur and phophorus content free-cutting steels for direct hardening are not recoended for welding. Notes: ISO S 20 DIN S20 EN S20
11 CASE HARDENING STEELS»16MnCr5»16MnCrS5»16NiCr4»16NiCrS4Pb»
12 16MnCr5 Special alloy case-hardening steel (W. NR ) CHEMICAL COMPOSITION: (heat analysis according to the EN standard) C % Si % Mn % P % S % Cr % FROM 0,14-1, ,80 TO 0,19 0,40 1,30 0,025 0,035 1,10 *MECHANICAL FEATURES: (according to the EN standard) Soft annealed* + peeled rolled (+A +SH ) Soft annealed* + cold drawn ( +A+C ) Hardness maximum HB Hardness maximum HB > > > > * Delivery condition: subjected to a softening treatment according to the maximum hardness prescription. It is a MnCr alloy steel, easily hot machinable and weldable. Hardenability: It has a low hardenability and therefore it can show good core features till thicknesses of about 20. Notes : UNI MnCr5 DIN MnCr5 ISO MnCr5 AFNOR MC5
13 16MnCrS5 Special alloy case-hardening steel (W. NR ) CHEMICAL COMPOSITION: (heat analysis according to the EN standard) C % Si % Mn % P % S % Cr % FROM 0,14-1,00-0,020 0,80 TO 0,19 0,40 1,30 0,025 0,040 1,10 *MECHANICAL FEATURES: (according to the EN standard) Soft annealed* + peeled rolled (+A +SH ) Soft annealed* + cold drawn ( +A+C ) Hardness maximum HB Hardness maximum HB > > > > * Delivery condition: subjected to a softening treatment according to the maximum hardness prescription. Improved machinability: Upon request it can be supplied with improved machinability with Pb (lead) addition, for example Pb=0,15% 0,35% It is a MnCr alloy steel, easily hot machinable and weldable. Hardenability: It has a low hardenability and therefore it can show good core features till thicknesses of about 20. Notes : UNI MnCr5 EN MnCrS5 DIN MnCrS5 ISO MnCrS5 AFNOR MC5
14 16NiCr4 Special alloy case-hardening steel (W. NR ) CHEMICAL COMPOSITION: (heat analysis according to the EN standard) C % Si % Mn % P % S % Cr % Ni % FROM 0,13-0, ,60 0,80 TO 0,19 0,40 1,00 0,025 0,035 1,00 1,10 *MECHANICAL FEATURES: (according to the EN standard) Soft annealed* + peeled rolled (+A +SH ) Soft annealed* + cold drawn ( +A+C ) Hardness maximum HB Hardness maximum HB > > > > * Delivery condition: subjected to a softening treatment according to the maximum hardness prescription. Good machinability in the annealed condition and good aptitude / endurance to heat treatment; this steel grade undergoes heat treatment without important deformations. Hardenability: It has a low-medium hardenability enabling the use, with good core resistance, till a thickness of about 50. Notes : UNI CrNi4 AISI - SAE 3115
15 16NiCrS4Pb Special alloy case-hardening steel (W. NR ) CHEMICAL COMPOSITION: (heat analysis according to the EN standard) C % Si % Mn % P % S % Cr % Ni % Pb % FROM 0,13-0,70-0,020 0,60 0,80 0,15 TO 0,19 0,40 1,00 0,025 0,040 1,00 1,10 0,35 *MECHANICAL FEATURES: (according to the EN standard) Soft annealed* + peeled rolled (+A +SH ) Soft annealed* + cold drawn ( +A+C ) Hardness maximum HB Hardness maximum HB > > > > * Delivery condition: subjected to a softening treatment according to the maximum hardness prescription. Good machinability in the annealed condition and good aptitude / endurance to heat treatment; this steel grade undergoes heat treatment without important deformations. Hardenability: It has a low-medium hardenability enabling the use, with good core resistance, till a thickness of about 50. Notes : UNI CrNi4 EN NiCrS4 AISI - SAE 3115
16 20MnCrS5 Special alloy case-hardening steel (W. NR ) CHEMICAL COMPOSITION: (heat analysis according to EN ) C % Si % Mn % P % S % Cr % FROM 0,17-1,10-0,020 1,00 TO 0,22 0,40 1,40 0,025 0,040 1,30 *MECHANICAL FEATURES: (according to EN ) Soft annealed* + peeled rolled (+A +SH ) Soft annealed* + cold drawn ( +A+C ) Hardness HB Maximum Hardness HB Maximum > > > > * Delivery condition: subjected to a softening treatment according to the maximum required hardness. It is a MnCr-alloy steel, easily hot machinable and weldable. Hardenability: It has got a quite good hardenability and therefore it can show good core properties till a thickness of about 40. Notes : Correspondence with other standards ( purely as an indication ) : UNI MnCr5 EN MnCrS5 DIN MnCrS5 ISO MnCrS5 AFNOR MC5
17 C10 Non-alloy steel for general purposes (W. NR ) CHEMICAL COMPOSITION: (heat analysis according to the EN standard) C % Si % Mn % P % S % FROM 0,07-0, TO 0,13 0,40 0,60 0,045 0,045 *MECHANICAL FEATURES: (according to the EN standard) rolled + peeled rolled (+SH ) Rp 0, > > > > * Delivery condition: as rolled It is a soft carbon-steel, easily cold machinable and weldable without any particular precautions. Improved machinability: Upon request it can be supplied with improved machinability with Pb (lead) addition, for example Pb=0,15% 0,35% Notes: UNI 7846 C10 DIN CK10 AFNOR XC10
18 C10E Special non-alloy case-hardening steel (W. NR ) CHEMICAL COMPOSITION: (heat analysis according to the EN standard) C % Si % Mn % P % S % FROM 0,07-0, TO 0,13 0,40 0,60 0,035 0,035 *MECHANICAL FEATURES: (according to the EN standard) rolled + peeled rolled (+SH ) Rp 0,2 cold drawn Minimum > > > > * Delivery condition: as rolled It is a soft carbon-steel, easily cold machinable and weldable without any particular precautions. Improved machinability: Upon request it can be supplied with improved machinability with Pb (lead) addition, for example Pb=0,15% 0,35% Notes: CORRESPONDENCE WITH OTHER STANDARDS ( purely as an indication ): UNI 7846 C10 DIN CK10 ISO C10 AFNOR XC10
19 C10R Special non-alloy case-hardening steel (W. NR ) CHEMICAL COMPOSITION: (heat analysis according to the EN standard) C % Si % Mn % P % S % FROM 0,07-0,30-0,020 TO 0,13 0,40 0,60 0,035 0,040 *MECHANICAL FEATURES: (according to the EN standard) rolled + peeled rolled (+SH ) Rp 0,2 cold drawn Minimum > > > > * Delivery condition: as rolled It is a soft carbon-steel, easily cold machinable and weldable without any particular precautions. Improved machinability: Upon request it can be supplied with improved machinability with Pb (lead) addition, for example Pb=0,15% 0,35% Notes: CORRESPONDENCE WITH OTHER STANDARDS ( purely as an indication ): UNI 7846 C10 DIN CK10 ISO C10 AFNOR XC10
20 C15 Non-alloy steel for general purposes (W. NR ) CHEMICAL COMPOSITION: (heat analysis according to the EN standard) C % Si % Mn % P % S % FROM 0,12-0, TO 0,18 0,40 0,80 0,045 0,045 *MECHANICAL FEATURES: (according to the EN standard) Rolled + peeled rolled (+SH ) Rp 0, > > > > * Delivery condition: as rolled PROPERTIES: It is a soft carbon-steel, easily cold machinable and weldable without any particular precautions. Improved machinability: Upon request it can be supplied with improved machinability with Pb (lead) addition, for example Pb=0,15% 0,35% Notes: CORRESPONDENCE WITH OTHER STANDARDS ( purely as an indication ): UNI 7846 C15 DIN CK15 AFNOR XC12
21 C15E Special non-alloy case-hardening steel (W. NR ) CHEMICAL COMPOSITION: (heat analysis according to the EN standard) C % Si % Mn % P % S % FROM 0,12-0, TO 0,18 0,40 0,60 0,035 0,035 *MECHANICAL FEATURES: (according to the EN standard) rolled + peeled rolled (+SH ) Rp 0, > > > > * Delivery condition: as rolled It is a soft carbon-steel, easily cold machinable and weldable without any particular precautions. Improved machinability: Upon request it can be supplied with improved machinability with Pb (lead) addition, for example Pb=0,15% 0,35% Notes: CORRESPONDENCE WITH OTHER STANDARDS ( purely as an indication ): UNI 7846 C15 DIN CK15 ISO C15E4 AFNOR XC12
22 C15R Special non-alloy case-hardening steel (W. NR ) CHEMICAL COMPOSITION: (heat analysis according to the EN standard) C % Si % Mn % P % S % FROM 0,12-0,30-0,020 TO 0,18 0,40 0,60 0,035 0,040 *MECHANICAL FEATURES: (according to the EN standard) rolled + peeled rolled (+SH ) Rp 0, > > > > * Delivery condition: as rolled It is a soft carbon-steel, easily cold machinable and weldable without any particular precautions. Improved machinability: Upon request it can be supplied with improved machinability with Pb (lead) addition, for example Pb=0,15% 0,35% Notes: CORRESPONDENCE WITH OTHER STANDARDS ( purely as an indication ): UNI 7846 C15 DIN CK15 ISO C15M2 AFNOR XC12
23 NON ALLOY ENGINEERING STEELS»E295GC»E335GC»E360»S235JR»S235JRC»S275JR»S355J2C
24 E295GC Non-alloy steel for structural purposes (W. NR ) CHEMICAL COMPOSITION: (heat analysis according to the EN standard) C % Si % Mn % P % S % N % Cu % FROM TO ,045 0,045 0,012 - *MECHANICAL FEATURES: (according to the EN standard) Rolled + peeled rolled (+SH ) Rp 0, > > > > * Delivery condition: as rolled. PROPERTIES: Failing any prescriptions concerning chemical composition, no technical data about this steel weldability are available. Notes: EN :2004 E295 EN 10025:90 Fe UNI 7070 Fe 490 DIN St 50-2 NF A A 50-2
25 E335GC Non-alloy steel for structural purposes (W. NR ) CHEMICAL COMPOSITION: (heat analysis according to the EN standard) C % Si % Mn % P % S % N % Cu % FROM TO ,045 0,045 0,012 - *MECHANICAL FEATURES: (according to the EN standard) Rolled + peeled rolled (+SH ) Rp 0, > > > > * Delivery condition: as rolled. PROPERTIES: Failing any prescriptions concerning chemical composition, no technical data about this steel weldability are available. Notes: EN :2004 E335 EN 10025:90 Fe UNI 7070 Fe 590 DIN St 60-2 NF A A 60-2
26 E360 Non-alloy steel for structural purposes. (W. NR ) CHEMICAL COMPOSITION: (heat analysis according to the EN standard) C % Si % Mn % P % S % N % Cu % FROM TO ,045 0,045 0,012 - *MECHANICAL FEATURES: (according to the UNI standard) * Delivery condition: as rolled. PROPERTIES: Rp 0,2 Rm > > > > > > Failing any prescriptions concerning chemical composition, no technical data about this steel weldability are available. Notes: EN :2004 E360 EN 10025:90 Fe UNI 7070 Fe 690 DIN St 70-2 NF A A 70-2
27 S235JR Non-alloy steel for structural purposes (W. NR ) CHEMICAL COMPOSITION: (heat analysis according to the EN standard) C % For thicknesses in 16 >16 40 >40 Si % Mn % P % S % N % Cu % FROM TO 0,17 0,17 0,20-1,40 0,035 0,035 0,012 0,55 *MECHANICAL FEATURES: (according to the EN standard) Rolled + peeled rolled (+SH ) Rp 0, > > > > * Delivery condition: as rolled. This steel grade is generally suitable to welding. Notes: EN 10025:90 Fe 360 BFN DIN RSt 37-2 BS B
28 S235JRC Non-alloy steel for structural purposes (W. NR ) CHEMICAL COMPOSITION: (heat analysis according to the EN standard) C % For thicknesses in 40 > 40 Si % Mn % P % S % N % Cu % FROM TO 0,17 0,20-1,40 0,040 0,040 0,012 0,55 *MECHANICAL FEATURES: (according to the EN standard) Rolled + peeled rolled (+SH ) Rp 0, > > > > * Delivery condition: as rolled. This steel grade is generally suitable to welding. Notes: EN :2004 S235JR
29 S275JR Non-alloy steel for structural purposes. (W. NR ) CHEMICAL COMPOSITION: (heat analysis according to the EN standard) C % For thicknesses in 16 >16 40 >40 Si % Mn % P % S % N % Cu % FROM TO 0,21 0,21 0,22-1,50 0,035 0,035 0,012 0,55 *MECHANICAL FEATURES: (according to the UNI standard) * Delivery condition: as rolled. Rp 0,2 Rm > > > > > > This steel grade is generally suitable to welding. Notes: EN :2004 S275JR EN 10025:90 Fe 430 B UNI 7070 Fe 430 B DIN St 44-2 NF A E 28-2
30 S355J2C Non-alloy steel for structural purposes (W. NR ) CHEMICAL COMPOSITION: (heat analysis according to the EN standard) C % For thicknesses in 30 >30 Si % Mn % P % S % N % Cu % FROM TO 0,20 0,22 0,55 1,60 0,030 0,030-0,55 *MECHANICAL FEATURES: (according to the EN standard) Rolled + peeled rolled (+SH ) Rp 0, > > > > * Delivery condition: as rolled. Calculation of the equivalent carbon: CEV = C + Mn + Cr+Mo+V + Ni+Cu This steel grade is generally suitable to welding. Notes: EN :2004 S355J2 UNI 7070 Fe 510 D DIN St 52-3 N BS D8
31 HEAT TREATABLE STEELS»34CrMo4»34CrMoS4»40Crv4»42CrMo4»42CrMoS4»51CrV4»C22»C22E»C22R»C35»C35E»C35R»C40»C40E»C40R»C45»C45E»C45R»C50»C50E»C50R
32 34CrMo4 Special alloy steel (W.NR ) CHEMICAL COMPOSITION: (analysis according to the EN standard) C % Si % Mn % P % S % Cr % Mo % FROM 0,30-0, ,90 0,15 TO 0,37 0,40 0,90 0,025 0,035 1,20 0,30 * MECHANICAL FEATURES: (according to the UNI standard) * Delivery condition: soft annealed. annealed + cold drawn ( +A+C ) maximum > > > Low weldability; this steel grade can be welded only with suitable precautions. Hardenability: Steel grade with medium carbon content showing a poor hardenability; sensitive to notching and to quenching cracks. Notes : CORRESPONDENCE WITH OTHER STANDARDS ( purely as an indication) : UNI CrMo4 DIN CrMo4 ISO CrMo4 AFNOR CD4 AISI-SAE 4135
33 34CrMoS4 Special alloy steel (W.NR ) CHEMICAL COMPOSITION: (analysis according to the EN standard) C % Si % Mn % P % S % Cr % Mo % FROM 0,30-0,60-0,020 0,90 0,15 TO 0,37 0,40 0,90 0,025 0,040 1,20 0,30 * MECHANICAL FEATURES: (according to the UNI standard) * Delivery condition: soft annealed. annealed + cold drawn ( +A+C ) maximum > > > Low weldability; this steel grade can be welded only with suitable precautions. Hardenability: Steel grade with medium carbon content showing a poor hardenability; sensitive to notching and to quenching cracks. Notes : CORRESPONDENCE WITH OTHER STANDARDS ( purely as an indication) : UNI CrMo4 DIN CrMoS4 ISO CrMoS4 AFNOR CD4u AISI-SAE 4135
34 40CrV4 Special alloy steel / CHEMICAL COMPOSITION: (Trafileria Mauri internal analysis) C % Si % Mn % P % S % Cr % Ni % Mo % Al % V FROM 0,36 0,15 0, , ,005 0,11 TO 0,40 0,40 0,65 0,035 0,035 0,85 0,20 0,10 0,020 0,15 * MECHANICAL FEATURES: Annealed + peeled rolled (+A +SH ) annealed + cold drawn ( +A+C ) maximum maximum > > > > * Delivery condition: soft annealed. PROPERTIES: Due to the medium-high carbon content it can be welded with some precautions. It is particularly sensitive to cracks in the heat altered zone. Hardenability: Steel grade with limited hardenability; if suitably treated in convenient sizes (till a thickness of ) it can give very good results. Notes :
35 42CrMo4 Special alloy steel (W.NR ) CHEMICAL COMPOSITION: (analysis according to the EN standard) C % Si % Mn % P % S % Cr % Mo % FROM 0,38-0, ,90 0,15 TO 0,45 0,40 0,90 0,025 0,035 1,20 0,30 * MECHANICAL FEATURES: (according to the EN standard) * Delivery condition: soft annealed. Annealed + cold drawn ( +A+C ) maximum > > > > Bad weldability due to the high crack danger. Hardenability: Medium-good hardenability, suitable for hot purposes till a temperature of 500. It can be hardened in oil. Notes : UNI CrMo4 DIN CrMo4 ISO CrMo4 AFNOR CD4 AISI-SAE 4140
36 42CrMoS4 Special alloy steel (W.NR ) CHEMICAL COMPOSITION: (analysis according to the EN standard) C % Si % Mn % P % S % Cr % Mo % FROM 0,38-0,60-0,020 0,90 0,15 TO 0,45 0,40 0,90 0,025 0,040 1,20 0,30 * MECHANICAL FEATURES: (according to the EN standard) * Delivery condition: soft annealed. annealed + cold drawn ( +A+C ) maximum > > > > Bad weldability due to the high crack danger. Hardenability: Medium-good hardenability, suitable for hot purposes till a temperature of 500. It can be hardened in oil. Notes : UNI CrMo4 DIN CrMoS4 ISO CrMoS4 AFNOR CD4u AISI-SAE 4140
37 51CrV4 Special alloy steel (W.NR ) CHEMICAL COMPOSITION: (analysis according to the EN standard) C % Si % Mn % P % S % Cr % V % FROM 0,47-0, ,90 0,10 TO 0,55 0,40 1,10 0,025 0,035 1,20 0,25 * MECHANICAL FEATURES: (according to the EN standard) * Delivery condition: soft annealed. annealed + cold drawn ( +A+C ) maximum > > Bad weldability due to the high crack danger. Hardenability: Good hardenability; suitable for pieces of small sizes and for exacting purposes. It can be hardened in oil. Notes : UNI CrV4 DIN CrV4 ISO CrV4 AISI/SAE 6150 AFNOR CV4
38 C22 Non-alloy high grade steel (W. NR ) CHEMICAL COMPOSITION: (heat analysis according to the EN : 98 standard) C % Si % Mn % P % S % Cr % Ni % Mo % Cr+Mo+Ni % FROM 0,17-0, TO 0,24 0,40 0,70 0,045 0,045 0,40 0,40 0,10 0,63 * MECHANICAL FEATURES: (according to the UNI standard) * Delivery condition: as rolled. PROPERTIES : Rp0,2 Rm A5 % > > > > > > Semi-hard, tough carbon-steel, easily machinable by cold-strain. Easily weldable. Hardenability: Extremely low hardenability, used above all for pieces of small section and when deformations due to water-quenching are allowed. Notes : CORRESPONDENCE WITH OTHER STANDARDS ( purely as an indication) : DIN C22
39 C22E Non-alloy special steel (W. NR ) CHEMICAL COMPOSITION: (heat analysis according to the EN : 06 standard) C % Si % Mn % P % S % Cr % Ni % Mo % Cr+Mo+Ni % FROM 0,17-0, TO 0,24 0,40 0,70 0,030 0,035 0,40 0,40 0,10 0,63 * MECHANICAL FEATURES: (according to the UNI standard) * Delivery condition: as rolled. Rp0,2 Rm A5 % > > > > > > Semi-hard, tough carbon-steel, easily machinable by cold-strain. Easily weldable. Hardenability: Extremely low hardenability, used above all for pieces of small section and when deformations due to water-quenching are allowed. Notes : CORRESPONDENCE WITH OTHER STANDARDS ( purely as an indication) : DIN CK22 AFNOR XC18
40 C22R Non-alloy special steel (W. NR ) CHEMICAL COMPOSITION: (heat analysis according to the EN : 06 standard) C % Si % Mn % P % S % Cr % Ni % Mo % Cr+Mo+Ni % FROM 0,17-0,40-0, TO 0,24 0,40 0,70 0,030 0,040 0,40 0,40 0,10 0,63 *MECHANICAL FEATURES: (according to the UNI standard) * Delivery condition: as rolled. Rp 0,2 Rm > > > > > > Semi-hard, tough carbon-steel, easily machinable by cold-strain. Easily weldable. Hardenability: Extremely low hardenability, used above all for pieces of small section and when deformations due to water-quenching are allowed. Notes : CORRESPONDENCE WITH OTHER STANDARDS ( purely as an indication) : DIN Cm22 AFNOR XC18u
41 C35 Non-alloy high grade steel (W. NR ) CHEMICAL COMPOSITION: (heat analysis according to the EN standard) C % Si % Mn % P % S % Cr % Ni % Mo % Cr+Mo+Ni % FROM 0,32-0, TO 0,39 0,40 0,80 0,045 0,045 0,40 0,40 0,10 0,63 * MECHANICAL FEATURES: (according to the EN standard) Rolled + peeled rolled ( +SH ) Rp 0, > > > > * Delivery condition: as rolled. Improved machinability: In order to improve its machinability, this steel grade can be supplied upon request with Pb (lead) addition, for example Pb=0,15% 0,35% It can be welded quite well without any precautions. Hardenability: Low hardenability; core quenching in water till a diameter of ; as far as bigger diameters are concerned, it hardens only till a certain depth, inversely proportional to diameter, like all nonalloy steels with medium-high carbon content. Notes : UNI 7845 C35 DIN C35 ISO C35 AISI-SAE 1035 AFNOR AF55C35
42 C35E Non-alloy special steel (W. NR ) CHEMICAL COMPOSITION: (heat analysis according to the EN standard) C % Si % Mn % P % S % Cr % Ni % Mo % Cr+Mo+Ni % FROM 0,32-0, TO 0,39 0,40 0,80 0,030 0,035 0,40 0,40 0,10 0,63 * MECHANICAL FEATURES: (according to the EN standard) Rolled + peeled rolled ( +SH ) Rp 0, > > > > * Delivery condition: as rolled. It can be welded quite well without any precautions. Hardenability: Low hardenability; core quenching in water till a diameter of ; as far as bigger diameters are concerned, it hardens only till a certain depth, inversely proportional to diameter, like all nonalloy steels with medium-high carbon content. Notes : UNI 7845 C35 DIN CK35 ISO C35E4 AISI-SAE 1035 AFNOR XC38H1
43 C35R Non-alloy special steel (W. NR ) CHEMICAL COMPOSITION: (heat analysis according to the EN standard) C % Si % Mn % P % S % Cr % Ni % Mo % Cr+Mo+Ni % FROM 0,32-0,50-0, TO 0,39 0,40 0,80 0,030 0,040 0,40 0,40 0,10 0,63 * MECHANICAL FEATURES: (according to the EN standard) Rolled + peeled rolled ( +SH ) Rp 0, > > > > * Delivery condition: as rolled. It can be welded quite well without any precautions. Hardenability: Low hardenability; core quenching in water till a diameter of ; as far as bigger diameters are concerned, it hardens only till a certain depth, inversely proportional to diameter, like all nonalloy steels with medium-high carbon content. Notes : UNI 7845 C35 DIN Cm35 ISO C35M2 AISI-SAE 1035 AFNOR XC38H1u
44 C40 Non-alloy high grade steel (W. NR ) CHEMICAL COMPOSITION: (heat analysis according to the EN standard) C % Si % Mn % P % S % Cr % Ni % Mo % Cr+Mo+Ni % FROM 0,37-0, TO 0,44 0,40 0,80 0,045 0,045 0,40 0,40 0,10 0,63 * MECHANICAL FEATURES: (according to the EN standard) Rolled + peeled rolled ( +SH ) Rp 0, > > > > * Delivery condition: as rolled. Improved machinability: In order to improve its machinability, this steel grade can be supplied upon request with Pb (lead) addition, for example Pb=0,15% 0,35% Due to the medium-high carbon content it can be welded with some precautions. Hardenability: Low hardenability; it shows intermediate features between those of steels with medium and those of steels with high carbon content; therefore it is not easy to obtain the required features by quenching in oil and the quenching in water can result in cracking. Notes: CORRESPONDENCE WITH OTHER STANDARDS ( purely as an indication) : UNI 7845 C40 DIN C40 ISO C40 AISI-SAE 1040 AFNOR AF60C40
45 C40E Non-alloy special steel (W. NR ) CHEMICAL COMPOSITION: (heat analysis according to the EN standard) C % Si % Mn % P % S % Cr % Ni % Mo % Cr+Mo+Ni % FROM 0,37-0, TO 0,44 0,40 0,80 0,030 0,035 0,40 0,40 0,10 0,63 * MECHANICAL FEATURES: (according to the EN standard) Rolled + peeled rolled ( +SH ) Rp 0, > > > > * Delivery condition: as rolled. Due to the medium-high carbon content it can be welded with some precautions. Hardenability: Low hardenability; it shows intermediate features between those of steels with medium and those of steels with high carbon content; therefore it is not easy to obtain the required features by quenching in oil and the quenching in water can result in cracking. Notes: CORRESPONDENCE WITH OTHER STANDARDS ( purely as an indication) : UNI 7845 C40 DIN Ck40 ISO C40E4 AISI-SAE 1040 AFNOR XC42H1
46 C40R Non-alloy special steel (W. NR ) CHEMICAL COMPOSITION: (heat analysis according to the EN standard) C % Si % Mn % P % S % Cr % Ni % Mo % Cr+Mo+Ni % FROM 0,37-0,50-0, TO 0,44 0,40 0,80 0,030 0,040 0,40 0,40 0,10 0,63 * MECHANICAL FEATURES: (according to the EN standard) Rolled + peeled rolled ( +SH ) Rp 0, > > > > * Delivery condition: as rolled. Due to the medium-high carbon content it can be welded with some precautions. Hardenability: Low hardenability; it shows intermediate features between those of steels with medium and those of steels with high carbon content; therefore it is not easy to obtain the required features by quenching in oil and the quenching in water can result in cracking. Notes: CORRESPONDENCE WITH OTHER STANDARDS ( purely as an indication) : UNI 7845 C40 DIN Cm40 ISO C40M2 AISI-SAE 1040 AFNOR XC42H1u
47 C45 Non-alloy high-grade steel (W. NR ) CHEMICAL COMPOSITION: (heat analysis according to the EN standard) C % Si % Mn % P % S % Cr % Ni % Mo % Cr+Mo+Ni % FROM 0,42-0, TO 0,50 0,40 0,80 0,045 0,045 0,40 0,40 0,10 0,63 * MECHANICAL FEATURES: (according to the EN standard) Rolled + peeled rolled ( +SH ) Rp 0, > > > > * Delivery condition: as rolled. Improved machinability: In order to improve its machinability, this steel grade can be supplied upon request with Pb (lead) addition, for example Pb=0,15% 0,35% Due to the medium-high carbon content it can be welded with some precautions. Hardenability: It has a low hardenability in water or oil; fit for surface hardening that gives this steel grade a high hardness of the hardened shell. Notes : UNI 7845 C45 DIN C45 ISO C45 AISI-SAE 1045 AFNOR AF65C45
48 C45E Non-alloy special steel (W. NR ) CHEMICAL COMPOSITION: (heat analysis according to the EN standard) C % Si % Mn % P % S % Cr % Ni % Mo % Cr+Mo+Ni % FROM 0,42-0, TO 0,50 0,40 0,80 0,030 0,035 0,40 0,40 0,10 0,63 * MECHANICAL FEATURES: (according to the EN standard) Rolled + peeled rolled ( +SH ) Rp 0, > > > > * Delivery condition: as rolled. Due to the medium-high carbon content it can be welded with some precautions. Hardenability: It has a low hardenability in water or oil; fit for surface hardening that gives this steel grade a high hardness of the hardened shell. Notes : UNI 7845 C45 DIN Ck45 ISO C45E4 AISI-SAE 1045 AFNOR XC48H1
49 C45R Non-alloy special steel (W. NR ) CHEMICAL COMPOSITION: (heat analysis according to the EN standard) C % Si % Mn % P % S % Cr % Ni % Mo % Cr+Mo+Ni % FROM 0,42-0,50-0, TO 0,50 0,40 0,80 0,030 0,040 0,40 0,40 0,10 0,63 * MECHANICAL FEATURES: (according to the EN standard) Rolled + peeled rolled ( +SH ) Rp 0, > > > > * Delivery condition: as rolled. Due to the medium-high carbon content it can be welded with some precautions. Hardenability: It has a low hardenability in water or oil; fit for surface hardening that gives this steel grade a high hardness of the hardened shell. Notes : UNI 7845 C45 DIN Cm45 ISO C45M2 AISI-SAE 1045 AFNOR XC48H1u
50 C50 Non-alloy high grade steel (W. NR ) CHEMICAL COMPOSITION: (heat analysis according to the EN :1999 standard) C % Si % Mn % P % S % Cr % Ni % Mo % Cr+Mo+Ni % FROM 0,47-0, TO 0,55 0,40 0,90 0,045 0,045 0,40 0,40 0,10 0,63 * MECHANICAL FEATURES: (according to the EN :1999 standard) Rolled + peeled rolled ( +SH ) Rp 0, > > > > * Delivery condition: as rolled. Not weldable. It can be welded only with particular precautions. It has a bad machinability. Hardenability: It has a low hardenability in water or oil; fit for surface hardening that gives this steel grade a high hardness of the hardened shell. Notes : CORRESPONDENCE WITH THE OTHER STANDARDS ( purely as an indication ) : UNI 7845 C50 DIN C50 AISI-SAE 1050
51 C50E Non-alloy special steel (W. NR ) CHEMICAL COMPOSITION: (heat analysis according to the EN standard) 52 standard) C % Si % Mn % P % S % Cr % Ni % Mo % Cr+Mo+Ni % FROM 0,47-0, TO 0,55 0,40 0,90 0,030 0,035 0,40 0,40 0,10 0,63 * MECHANICAL FEATURES: (according to the EN standard) Rolled + peeled rolled ( +SH ) Rp 0, > > > > * Delivery condition: as rolled. Not weldable. It can be welded only with particular precautions. It has a bad machinability. Hardenability: It has a low hardenability in water or oil; fit for surface hardening that gives this steel grade a high hardness of the hardened shell. Notes : CORRESPONDENCE WITH THE OTHER STANDARDS ( purely as an indication ) : UNI 7845 C50 DIN Ck50 ISO C50E4 AISI-SAE 1050
52 C50R Non-alloy special steel (W. NR ) CHEMICAL COMPOSITION: (heat analysis according to the EN standard) C % Si % Mn % P % S % Cr % Ni % Mo % Cr+Mo+Ni % FROM 0,47-0,60-0, TO 0,55 0,40 0,90 0,030 0,040 0,40 0,40 0,10 0,63 * MECHANICAL FEATURES: (according to the EN standard) Rolled + peeled rolled ( +SH ) Rp 0, > > > > * Delivery condition: as rolled. Not weldable. It can be welded only with particular precautions. It has a bad machinability. Hardenability: It has a low hardenability in water or oil; fit for surface hardening that gives this steel grade a high hardness of the hardened shell. Notes : CORRESPONDENCE WITH THE OTHER STANDARDS ( purely as an indication ) : UNI 7845 C50 DIN Cm50 ISO C50M2 AISI-SAE 1050
53 BALL BEARING STEELS» 100Cr6
54 100Cr6 Ball bearing steel (W.NR ) CHEMICAL COMPOSITION: (analysis according to the ISO standard) C % Si % Mn % P % 1) S % Cr % Mo % FROM 0,93 0,15 0, ,35 - TO 1,05 0,35 0,45 0,025 0,015 1,60 0,10 1) In the cases where machinability is of primary importance, a maximum sulphur content S=0,030% can be agreed. * MECHANICAL FEATURES: (according to the ISO standard) Spheroidized annealed + cold drawn ( +AC+C ) 2) maximum 241 * Delivery condition: Spheroidized annealed 2) Upon request it can be supplied with mechanical features differing from those indicated in the standard. Strain strength and resistance to wear : This steel grade is generally destined to applications in which a high strain strength and a high resistance to wear under high alternate loads are required. Therefore its main components must have a high hardness, a high elastic limit and a high fatigue strength. Hardenability: Good hardenability; hardening must allow quenching in oil to reduce to the the risk of hardening cracks or distortions and to minimize the subsequent grinding operations. Notes : UNI Cr6 DIN Cr6 AISI/SAE AFNOR C6
AUSTENITIC STAINLESS DAMASCENE STEEL
AUSTENITIC STAINLESS DAMASCENE STEEL Damasteel s austenitic stainless Damascene Steel is a mix between types 304L and 316L stainless steels which are variations of the 18 percent chromium 8 percent nickel
More informationWear-resistant steels. Technical terms of delivery for heavy plates. voestalpine Grobblech GmbH www.voestalpine.com/grobblech
Wear-resistant steels Technical terms of delivery for heavy plates voestalpine Grobblech GmbH www.voestalpine.com/grobblech Wear-resistant steels durostat durostat 400 durostat 450 durostat 500 durostat
More informationAISI O1 Cold work tool steel
T OOL STEEL FACTS AISI O1 Cold work tool steel Great Tooling Starts Here! This information is based on our present state of knowledge and is intended to provide general notes on our products and their
More informationPRELIMINARY BROCHURE. Uddeholm Ramax HH
PRELIMINARY BROCHURE Uddeholm Ramax HH Uddeholm Ramax HH Uddeholm Ramax HH provides several benefits: The product offers uniform hardness in all dimensions combined with excellent indentation resistance.
More informationRAMAX S Prehardened stainless holder steel
T O O L S T E E L F A C T S RAMAX S Prehardened stainless holder steel Wherever tools are made Wherever tools are used This information is based on our present state of knowledge and is intended to provide
More informationNorth American Stainless
North American Stainless Long Products Stainless Steel Grade Sheet 2205 UNS S2205 EN 1.4462 2304 UNS S2304 EN 1.4362 INTRODUCTION Types 2205 and 2304 are duplex stainless steel grades with a microstructure,
More informationNorth American Stainless
North American Stainless Flat Products Stainless Steel Sheet T409 INTRODUCTION NAS 409 is an 11% chromium, stabilized ferritic stainless steel. It is not as resistant to corrosion or high-temperature oxidation
More informationHEAT TREATMENT OF STEEL
HEAT TREATMENT OF STEEL Heat Treatment of Steel Most heat treating operations begin with heating the alloy into the austenitic phase field to dissolve the carbide in the iron. Steel heat treating practice
More informationHeat Treatment of Steels : Spheroidize annealing. Heat Treatment of Steels : Normalizing
Heat Treatment of Steels :Recrystallization annealing The carbon and alloy steels were treated at a temperature of about 700 C, which is about 20 C below the eutectoid temperature. The holding time should
More informationALLOY 2205 DATA SHEET
ALLOY 2205 DATA SHEET UNS S32205, EN 1.4462 / UNS S31803 GENERAL PROPERTIES ////////////////////////////////////////////////////// //// 2205 (UNS designations S32205 / S31803) is a 22 % chromium, 3 % molybdenum,
More informationUDDEHOLM COMPONENT BUSINESS
UDDEHOLM COMPONENT BUSINESS UDDEHOLM COMPONENT BUSINESS 1 UDDEHOLMS AB No part of this publication may be reproduced or transmitted for commercial purposes without permission of the copyright holder. This
More informationAppendice Caratteristiche Dettagliate dei Materiali Utilizzati
Appendice Caratteristiche Dettagliate dei Materiali Utilizzati A.1 Materiale AISI 9840 UNI 38NiCrMo4 AISI 9840 Steel, 650 C (1200 F) temper, 25 mm (1 in.) round Material Notes: Quenched, 540 C temper,
More informationProducts. EschmannStahlGrades Plastic Mould Steel Hot Work Tool Steel Cold Work Tool Steel Overview
Products EschmannStahlGrades Plastic Mould Steel Hot Work Tool Steel Cold Work Tool Steel Overview High quality, Comprehensive and applicationoriented We Have the Right Solution High Quality and Quickly
More informationCATALOGUE REFERENCE MATERIALS
IPT Institute for Technological Research CATALOGUE REFERENCE MATERIALS 2014 Laboratory of Metrological References IPT s Reference Materials www.ipt.br/nmr.htm Av. Prof. Almeida Prado n0 532 Predio 31 Cidade
More informationX15TN TM. A high hardness, corrosion and fatigue resistance martensitic grade CONTINUOUS INNOVATION RESEARCH SERVICE.
TM A high hardness, corrosion and fatigue resistance martensitic grade CONTINUOUS METALLURGICAL SPECIAL STEELS INNOVATION RESEARCH SERVICE DEVELOPMENT Enhancing your performance THE INDUSTRIAL ENVIRONMENT
More informationFLAME CuTTIng te la P is utting B c
FLAME CUTTING Both Oxy-LPG and Oxy-acetylene processes are acceptable for sectioning all thicknesses of BISPLATE. With these processes, the following techniques are recommended: Gas pressure to be the
More informationRESEARCH PAPERS FACULTY OF MATERIALS SCIENCE AND TECHNOLOGY IN TRNAVA SLOVAK UNIVERSITY OF TECHNOLOGY IN BRATISLAVA
RESEARCH PAPERS FACULTY OF MATERIALS SCIENCE AND TECHNOLOGY IN TRNAVA SLOVAK UNIVERSITY OF TECHNOLOGY IN BRATISLAVA 2010 Number 28 EFFECT OF REDUCTION IN THREE-DRAWN AND TWO-DRAWN SINGLE-RUN TECHNOLOGY
More information% Si Fe Cu Mn Mg Cr Zn Ti Others Others. Europe USA Spain France Germany G.B. Italy Sweden Switzerland Japan. ALMgSi1 3.3215 H30
ALUMINIUMS Alloys Aluminium - Magnesium - Silicon 6082 % Si Fe Cu Mn Mg Cr Zn Ti Others Others Minimum 0,70 0,40 0,60 Each Total Maximum 1,30 0,50 0,10 1,00 1,20 0,25 0,20 0,10 0,05 0,10 Europe USA Spain
More informationStainless steel grade chart
Stainless steel grade chart ATLAS STEELS METAL DISTRIBUTION Chemical analysis (%) specified C Si Mn P S Cr Mo Ni Other Austenitic stainless steels 253MA S30815 0.05 1.1-2.0 0.8 0.040 0.030 20.0-22.0 10.0-12.0
More informationNorth American Stainless
North American Stainless Flat Products Stainless Steel Grade Sheet 310S (S31008)/ EN 1.4845 Introduction: SS310 is a highly alloyed austenitic stainless steel designed for elevated-temperature service.
More informationEnhanced version of 316/316L austenitic stainless steel. Better material performance at a lower cost. Juha Kela 16.6.2014. Juha Kela / 316plus
Enhanced version of 316/316L austenitic stainless steel. Better material performance at a lower cost. Juha Kela 16.6.2014 8 July 2014 1 Lower cost 8 July 2014 2 Lower cost 316 plus is available at lower,
More informationThe mechanical properties of metal affected by heat treatment are:
Training Objective After watching this video and reviewing the printed material, the student/trainee will learn the basic concepts of the heat treating processes as they pertain to carbon and alloy steels.
More informationUDDEHOLM BALDER UDDEHOLM BALDER UDDEHOLM STEEL FOR INDEXABLE INSERT CUTTING TOOLS
UDDEHOLM BALDER Reliable and efficient steel is essential for good results. The same goes for achieving high productivity and high availability. When choosing the right steel many parameters must be considered,
More informationMATERIAL SPECIFICATIONS CATALOGUE
MATERIAL SPECIFICATIONS CATALOGUE Manganese Steel High Chrome White Iron Alloy Steel Carbon Steel Stainless Steel SG Iron Cast Iron E X C E L L E N C E T H R O U G H E X P E R I E N C E Foundries has the
More informationSS-EN ISO 9001 SS-EN ISO 14001
This information is based on our present state of knowledge and is intended to provide general notes on our products and their uses. It should not therefore be construed as a warranty of specific properties
More informationNorth American Stainless
North American Stainless Long Products Stainless Steel Grade Sheet AISI 316 UNS S31600 EN 1.4401 AISI 316L UNS S31630 EN 1.4404 INTRODUCTION NAS provides 316 and 316L SS, which are molybdenum-bearing austenitic
More informationStandard Specification for Stainless Steel Bars and Shapes 1
Designation: A 276 06 Standard Specification for Stainless Steel Bars and Shapes 1 This standard is issued under the fixed designation A 276; the number immediately following the designation indicates
More informationCold drawn seamless steel tubes for mechanical applications
Cold drawn seamless steel tubes for mechanical applications Cold drawn precision seamless tubes for mechanical and general engineering applications. Available in various steel grades, according to the
More informationAISI CHEMICAL COMPOSITION LIMITS: Nonresulphurized Carbon Steels
AISI CHEMICAL COMPOSITION LIMITS: Nonresulphurized Carbon Steels AISI No. 1008 1010 1012 1015 1016 1017 1018 1019 1020 1021 1022 1023 1024 10 1026 1027 1029 10 1035 1036 1037 1038 1039 10 1041 1042 1043
More informationDIN 2391-81 Part II SEAMLESS PRECISION STEEL TUBES
DIN 91-81 Part II SEAMLESS PREISION STEEL TUBES 1.Field of application This defines the technical delivery conditions for seamless precision steel tubes according to DIN 91 Part 1 which are made from the
More informationUDDEHOLM IMPAX SUPREME
UDDEHOLM IMPAX SUPREME Uddeholm Impax Supreme is a premium prehardened mould steel with very good polishing and texturing properties. Uddeholm Impax Supreme is available in a very wide dimensional range,
More informationNorth American Stainless
North American Stainless Long Products Stainless Steel Grade Sheet AISI 304 UNS S30400 EN 1.4301 AISI 304L UNS S30430 EN 1.4307 INTRODUCTION: Types 304 and 304L are the most versatile and widely used of
More informationNorth American Stainless
Introduction: North American Stainless Flat Products Stainless Steel Grade Sheet 309S (S30908)/ EN1.4833 SS309 is a highly alloyed austenitic stainless steel used for its excellent oxidation resistance,
More informationNorth American Stainless
North American Stainless Flat Products Stainless Steel Grade Sheet 430 (S43000)/ EN 1.4016 Introduction: SS430 is a low-carbon plain chromium, ferritic stainless steel without any stabilization of carbon
More informationSTAVAX SUPREME. Stainless tool steel
STAVAX SUPREME Stainless tool steel General Demands placed on plastic mould tooling are increasing. Such conditions require mould steels that possess a unique combination of toughness, corrosion resistance
More informationRely on Our Material Competence for Your Demanding Industrial Processes
Cast Materials Rely on Our Material Competence for Your Demanding Industrial Processes Our customer-focused R&D and continuous research on new material options enable us to develop equipment with a strong
More informationValve Steel. Valve Steel
Valve Steel Valve Steel BÖHLER-UDDEHOLM Precision Strip AB is one of the world s leading manufacturers of high quality strip steel. More than a century s experience of cold rolling has given us a unique
More informationSTRUCTURAL STEELS. Steel Grades S185 S235JR S235JRG2 S235JO S235J2G3 S235J2G4 S275JR S275JO S275J2G3 S275J2G4 S355JR S355JO S355J2G3 S355J2G4
STRUCTURAL STEELS Steel Grades S185 S235JR S235JRG2 S235JO S235J2G3 S235J2G4 S275JR S275JO S275J2G3 S275J2G4 S355JR S355JO S355J2G3 S355J2G4 S355K2G3 S355K2G4 E295 E335 E360 STRUCTURAL STEELS The unalloyed
More informationUddeholm Dievar is a specially developed steel grade by Uddeholm, which provides the best possible performance.
Uddeholm Dievar is a specially developed steel grade by Uddeholm, which provides the best possible performance. The chemical composition and the very latest in production technique make the property profile
More informationHigh-strength and ultrahigh-strength. Cut sheet from hot-rolled steel strip and heavy plate. voestalpine Steel Division www.voestalpine.
High-strength and ultrahigh-strength TM steels Cut sheet from hot-rolled steel strip and heavy plate Josef Elmer, Key account manager voestalpine Steel Division www.voestalpine.com/steel Weight savings
More informationMATERIALIZING VISIONS. Bohler-Uddeholm P20 Modified
MATERIALIZING VISIONS Bohler-Uddeholm P20 Modified General Bohler-Uddeholm P20 Modified is a Cr-Mo-alloyed steel which is supplied in the hardened and tempered condition. P20 Modified offers the following
More informationDIN 17172-78 STEEL PIPES FOR PIPE LINES FOR THE TRANSPORT OF COMBUSTIBLE FLUIDS AND GASES
DIN 17172-78 STEEL PIPES FOR PIPE LINES FOR THE TRANSPORT OF COMBUSTIBLE FLUIDS AND GASES For connection with the International Draft Standards 3183 and 3845 published by the International Organization
More informationGENERAL PROPERTIES //////////////////////////////////////////////////////
ALLOY 625 DATA SHEET //// Alloy 625 (UNS designation N06625) is a nickel-chromium-molybdenum alloy possessing excellent resistance to oxidation and corrosion over a broad range of corrosive conditions,
More informationMaterial data sheet. EOS Aluminium AlSi10Mg. Description
EOS Aluminium AlSi10Mg EOS Aluminium AlSi10Mg is an aluminium alloy in fine powder form which has been specially optimised for processing on EOSINT M systems This document provides information and data
More informationwww.ruukki.com WELDING. GENERAL HOT-ROLLED STEEL SHEETS, PLATES AND COILS
www.ruukki.com WELDING. GENERAL HOT-ROLLED STEEL SHEETS, PLATES AND COILS Selecting the welding process The choice of the welding process must include the consideration of any steel-specific limitations
More informationJIS G3461 Carbon Steel Tubes for Boiler and Heat Exchanger
JIS G3461 Carbon Steel Tubes for Boiler and Heat Exchanger 1. Scope This Japanese Industrial Standard specifies the carbon steel tubes, hereinafter referred to as the "tubes", used for exchanging heat
More informationStandard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes 1
Designation: A 213/A 213M 03b Used in USDOE-NE standards Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes 1 This standard is issued
More informationUDDEHOLM VANADIS 30 SUPERCLEAN
UDDEHOLM VANADIS 30 SUPERCLEAN UDDEHOLMS AB No part of this publication may be reproduced or transmitted for commercial purposes without permission of the copyright holder. This information is based on
More informationNEW SIX-SEALS CUTTING RING. INTERNATIONAL INDUSTRIAL PATENT Nr. 864061 of the 10/03/99 FLANKS AND DOES NOT REPLACE THE STANDARD RING CURRENTLY IN USE
B4 NEW SIX-SEALS CUTTING RING. INTERNATIONAL INDUSTRIAL PATENT Nr. 864061 of the 10/03/99 FLANKS AND DOES NOT REPLACE THE STANDARD RING CURRENTLY IN USE AVAILABLE IN CARBON AND STAINLESS STEEL 23 THEORY
More informationCold drawn seamless steel tubes for mechanical applications
Cold drawn seamless steel tubes for mechanical applications Cold drawn precision seamless tubes for mechanical and general engineering applications. Available in various steel grades, according to the
More informationDX2202 Duplex stainless steel
Stainless Europe Grade DX22 Duplex stainless steel Chemical Composition Elements C Mn Cr Ni Mo N %.25.3 23. 2.5
More informationUDDEHOLM ELMAX SUPERCLEAN
UDDEHOLM ELMAX SUPERCLEAN UDDEHOLMS AB No part of this publication may be reproduced or transmitted for commercial purposes without permission of the copyright holder. This information is based on our
More informationJIS G3472 Electric Resistance Welded Carbon Steel Tubes for Automobile Structural Purposes
JIS G3472 Electric Resistance Welded Carbon Steel Tubes for Automobile Structural Purposes 1. Scope This Japanese Industrial Standard specifies the electric resistance welded carbon steel tubes, hereinafter
More informationASTM A860/A860M-09 Standard Specification for Wrought High Strength. Ferritic Steel Butt Welding Fittings. 1. Scope :- 2. Reference Documents :-
Standard Specification for Wrought High Strength Ferritic Steel Butt Welding Fittings 1. Scope :- 1.1 This specification covers wrought high strength ferritic steel butt-welding fitting of seamless and
More informationCOMPAX SUPREME Mold Quality Tool Steel
T OOL STEEL FACTS COMPAX Mold Quality Tool Steel Great Tooling Starts Here! 2 This information is based on our present state of knowledge and is intended to provide general notes on our products and their
More informationNorth American Stainless
North American Stainless Flat Products Stainless Steel Grade Sheet 304 (S30400)/ EN 1.4301 304L (S30403) / EN 1.4307 304H (S30409) Introduction: Types 304, 304L and 304H are the most versatile and widely
More informationINFORMAZIONI GENERALI / GENERAL INFORMATION
INFORMAZIONI GENERALI / GENERAL INFORMATION LE FLANGE DELLA SOCIETà INTERTUBI SONO FORNITE IN ACCORDO ALLE SEGUENTI NORME: INTERTUBI S FLANGES ARE PROVIDED IN ACCORDING WITH THE FOLLOWINGS STANDARDS Norma
More informationMaterial data sheet. EOS Aluminium AlSi10Mg_200C. Description
EOS Aluminium AlSi10Mg_200C All information in this data sheet refers to the alloy EOS Aluminium AlSi10Mg_200C. This alloy is formed when the powder EOS Aluminium AlSi10Mg is processes at a building platform
More informationFRETTING FATIGUE OF STEELS WITH IFFERENT STRENGTH
FRETTING FATIGUE OF STEELS WITH IFFERENT STRENGTH Václav LINHART, Martin ČIPERA, Dagmar MIKULOVÁ SVÚM, a.s., Podnikatelská 565, 190 11 Praha 9- Běchovice,Czech Republic Abstract The investigation of fretting
More informationS355 European Standard Steel
1(7) S European Standard Steel S EN 10025 : 2004 Standard Plate S structural steel plate is a highstrength lowalloy European standard structural steel covering four of the six "Parts" within the EN 10025
More informationContents Nickel Alloys... 2 Copper Alloys... 19 Titanium Alloys... 26 Stainless Steel... 33 Miscellaneous... 35 Welding Material... 37 Contact...
2015-04-09 Page 1 Contents Nickel Alloys... 2 Copper Alloys... 19 Titanium Alloys... 26 Stainless Steel... 33 Miscellaneous... 35 Welding Material... 37 Contact... 41 2015-04-09 Page 2 Nickel Alloys Alloy
More informationNorth American Stainless
North American Stainless Flat Product Stainless Steel Grade Sheet 316 (S31600)/EN 1.4401 316L (S31603)/ EN 1.4404 INTRODUCTION NAS provides 316 and 316L SS, which are molybdenum-bearing austenitic stainless
More informationHot rolled products of structural steels
BRITISH STANDARD BS EN 10025-6:2004 +A1:2009 Hot rolled products of structural steels Part 6: Technical delivery conditions for flat products of high yield strength structural steels in the quenched and
More informationModule 3 Machinability. Version 2 ME, IIT Kharagpur
Module 3 Machinability Lesson 1 Cutting Tool Materials of common use Instructional Objectives At the end of this lesson, the students will be able to (i) Identify the needs and cite the chronological development
More informationHeat Treatment of Steel
Heat Treatment of Steel Steels can be heat treated to produce a great variety of microstructures and properties. Generally, heat treatment uses phase transformation during heating and cooling to change
More informationEstimating Welding Preheat Requirements for Unknown Grades of Carbon and Low-Alloy Steels
SUPPLEMENT TO THE WELDING JOURNAL, NOVEMBER 2008 Sponsored by the American Welding Society and the Welding Research Council Estimating Welding Preheat Requirements for Unknown Grades of Carbon and Low-Alloy
More informationNorth American Stainless Long Products
North American Stainless Long Products 1 North American Stainless North American Stainless is part of the most competitive stainless steel manufacturing group in the world, Acerinox, S.A. The development
More informationDuplex Stainless Steel Fabrication. Gary M. Carinci TMR Stainless Consultant for International Molybdenum Association
Duplex Stainless Steel Fabrication Gary M. Carinci TMR Stainless Consultant for International Molybdenum Association 1 Promoting molybdenum - as a material with superior properties and performance in a
More informationPRELIMINARY BROCHURE. Uddeholm Corrax
PRELIMINARY BROCHURE Uddeholm Corrax Uddeholm Corrax Uddeholm Corrax stainless moulds steel has a unique set of properties that makes it the ultimate choice in a large number of demanding applications.
More informationUddeholm Sleipner. Uddeholm Sleipner
Uddeholm Sleipner 1 UDDEHOLMS AB No part of this publication may be reproduced or transmitted for commercial purposes without permission of the copyright holder. This information is based on our present
More informationTechnical Data BLUE SHEET. Martensitic. stainless steels. Types 410, 420, 425 Mod, and 440A GENERAL PROPERTIES APPLICATIONS PRODUCT FORM
Technical Data BLUE SHEET Allegheny Ludlum Corporation Pittsburgh, PA Martensitic Stainless Steels Types 410, 420, 425 Mod, and 440A GENERAL PROPERTIES Allegheny Ludlum Types 410, 420, 425 Modified, and
More informationSteeltec ETG 88 /100
Steeltec ETG 88/100 2 3 Steel for more competitiveness Steel has been one of the most impor tant materials going back centuries. We man ufacture it in the grade and quality that allow our customers to
More informationRELIABILITY IS PITCH MECHANISM GEAR RINGS FLANGED SHAFT. Quenched and tempered steels, e.g. 34CrNiMo6
Range OF MATERIALS 2 RELIABILITY IS THE STRENGTH OF STEEL. RELIABILITY IS THE STRENGTH OF GEORGSMARIENHÜTTE GMBH. PITCH MECHANISM Ball and roller bearing steels, e.g. 18NiCrMo14-6 GEAR RINGS Case-hardening
More informationTHE INFLUENCE OF STEEL GRADE AND STEEL HARDNESS ON TOOL LIFE WHEN MILLING IN HARDENED TOOL STEEL
THE INFLUENCE OF STEEL GRADE AND STEEL HARDNESS ON TOOL LIFE WHEN MILLING IN HARDENED TOOL STEEL S. Gunnarsson, B. Högman and L. G. Nordh Uddeholm Tooling AB Research and Development 683 85 Hagfors Sweden
More informationSteel rod, bars and wire for cold heading and cold extrusion
BRITISH STANDARD rod, bars and wire for cold heading and cold extrusion Part 5: Technical delivery conditions for stainless steels The European Standard has the status of a British Standard ICS 77.140.60;
More informationPROPERTIES OF MATERIALS
1 PROPERTIES OF MATERIALS 1.1 PROPERTIES OF MATERIALS Different materials possess different properties in varying degree and therefore behave in different ways under given conditions. These properties
More informationGENERAL CATALOGUE ANY SHAPE YOU DESIRE WITH THE BEST STEEL WIRE
GENERAL CATALOGUE ANY SHAPE YOU DESIRE WITH THE BEST STEEL WIRE ANY SHAPE YOU DESIRE WITH THE BEST STEEL WIRE GENERAL CATALOGUE EDITION 7.0 February 2013 UNI EN ISO 9001:2008 Reg. No: 280-A INDEX COMPANY
More informationQSTE... hot-rolled high strength cold forming sheet steel as per EN 10 149
QSTE... hot-rolled high strength cold forming sheet steel as per QStE hot-rolled high strength cold forming sheet steel Steels labelled QStE are a class of fine grain micro-alloyed thermo-mechanically
More informationTARIFF CODE and updates standard
TARIFF CODE and updates standard No HS CODE AHTN CODE PRODUCT DESCRIPTION PRODUCT TYPE STANDARDS IDENTIFIED 7207 Semi finished products of iron or non alloy steel Containing by weight less than 0.25% of
More informationMaterial data sheet. EOS MaragingSteel MS1. Description
EOS MaragingSteel MS1 EOS MaragingSteel MS1 is a steel powder which has been optimized especially for processing on EOSINT M systems. This document provides information and data for parts built using EOS
More informationMaterial data sheet. EOS StainlessSteel GP1 for EOSINT M 270. Description, application
EOS StainlessSteel GP1 for EOSINT M 270 A number of different materials are available for use with EOSINT M systems, offering a broad range of e-manufacturing applications. EOS StainlessSteel GP1 is a
More informationNIPPON STEEL & SUMITOMO METAL SEAMLESS STEEL LINE PIPE
Pipe Products NIPPON STEEL & SUMITOMO METAL SEAMLESS STEEL LINE PIPE http://www.nssmc.com/ 2-6-1 Marunouchi, Chiyoda-ku,Tokyo 100-8071 Japan Tel: +81-3-6867-4111 SEAMLESS STEEL LINE PIPE P103en_01_201211f
More informationBar products from Ovako
Bar products from Ovako Competence and resources close-to-the-market The Ovako Group has grown out of mergers of steel companies with long traditions. With a combination of vast experience and know-how
More informationMaterial Selection. Chris Dolling. January 2006
Material Selection Chris Dolling Contents 1. Material Properties 2. Specifications & Standards 2.1. General 2.2. Yield Strength 2.3. Ultimate Tensile Strength 2.4. Ductility 2.5. Notch Toughness 2.6. Properties
More informationSection 4: NiResist Iron
Section 4: NiResist Iron Section 4 Ni-Resist Description of Grades...4-2 201 (Type 1) Ni-Resist...4-3 202 (Type 2) Ni-Resist...4-6 Stock Listings...4-8 4-1 Ni-Resist Description of Grades Ni-Resist Dura-Bar
More informationJournal of Engineering and Natural Sciences Mühendislik ve Fen Bilimleri Dergisi
Journal of Engineering and Natural Sciences Mühendislik ve Fen Bilimleri Dergisi Araştırma Makalesi / Research Article TURNING OF AISI 304 AUSTENITIC STAINLESS STEEL Sigma 2006/2 Cebeli ÖZEK, Ahmet HASÇALIK,
More informationSeamless Tubes and Pipes for Power Plants
Seamless Tubes and Pipes for Power Plants Seamless tubes and pipes for Power Plants Features The boiler tubes and pipes are manufactured with materials able to withstand high temperatures and high pressures.
More informationWelding Alloys Group. TETRA S, TETRA V & TETRA SB Stainless flux cored wires
Welding Alloys Group TETRA S, TETRA V & TETRA SB Stainless flux cored wires Flux cored wires range Welding Alloys Group offer the world s largest range of flux and metal cored welding wires for low, medium,
More informationEffect of Heat Treatment on Microstructure and Mechanical Properties of SAE 1025 Steel: Analysis by one-way ANOVA
J. Mater. Environ. Sci. 6 (1) (215) 11-16 Joseph et al. Effect of Heat Treatment on Microstructure and Mechanical Properties of SAE 125 Steel: Analysis by one-way ANOVA O.O. Joseph* 1, O.O. Joseph 2, R.O.
More informationMaterial data sheet. EOS CobaltChrome MP1. Description
EOS CobaltChrome MP1 EOS CobaltChrome MP1 is a cobalt-chrome-molybdenum-based superalloy powder which has been optimized especially for processing on EOSINT M systems. This document provides information
More informationTABLE OF CONTENTS 2 Heavy-Wall Seamless & Welded Carbon Steel Pipe. 4 Alloy Pipe & Tube. 6 Chrome-Moly Pipe. 7 Low-Temp Pipe
PRODUCT CATALOG TABLE OF CONTENTS 2 Heavy-Wall Seamless & Welded Carbon Steel Pipe 4 Alloy Pipe & Tube 6 Chrome-Moly Pipe 7 Low-Temp Pipe 9 Services amerpipe.com 1.800.316.5737 sales@amerpipe.com 18333
More informationEuropean Welding Standards
European Welding Standards John Dyson 15 th March 2004 European Standards Harmonised Standards Not all EN Standards are Harmonised, only those that are considered to satisfy relevant ESRs in product directives.
More informationCOATED CARBIDE. TiN. Al 2 O 3
COATED CARBIDE GENERAL INFORMATION CVD = Chemical Vapour Deposition coated grades GC2015, GC2025, GC2135, GC235, GC3005, GC3015, GC3020, GC3025, GC3115, GC4015, GC4025, GC4035, S05F, and CD1810. PVD =
More informationStandard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications 1
Designation: A 2/A 2M 04a e1 Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications 1 This standard is issued
More information