SVQ 2 Performing Engineering Operations at SCQF Level 5
|
|
- Cecily Fletcher
- 7 years ago
- Views:
Transcription
1 SVQ 2 Performing Engineering Operations at SCQF Level 5 AWarded by Excellence, Achievement & Learning Limited Accredited from 06/07/2011 to 30/06/2016 Group award number GC9W 22 Standards This SVQ is based on standards developed by SEMTA. SEMTA draws its membership from a broad range of occupations within the engineering and marine industry. Structure of the SVQ The way the SVQ is made up is shown below. The unit title appears in bold and the elements that make up each unit are listed under the unit title. Mandatory units Candidates must complete all of these units: Working Safely in an Engineering Environment (SCQF credit 5, SCQF Working safely in an engineering environment Working Efficiently and Effectively in Engineering (SCQF credit 5, SCQF Working efficiently and effectively in engineering Using and Communicating Technical Information (SCQF credit 5, SCQF Using and communicating technical information 3 Optional units (Excluding combinations - only 1 of the following units with asterisks may be included in the selection) **Producing Mechanical Engineering Drawings Using a CAD System (SCQF credit 29, SCQF Producing mechanical engineering drawings using a CAD system Producing Components Using Hand Fitting Techniques (SCQF credit 22, SCQF Producing components using hand fitting techniques Producing Mechanical Assemblies (SCQF credit 23, SCQF Producing mechanical Assemblies Forming and Assembling Pipework Systems (SCQF credit 27, SCQF Forming and assembling pipework systems
2 Carrying Out Aircraft Detail Fitting Activities (SCQF credit 30, SCQF Carrying out aircraft detail fitting activities Installing Aircraft mechanical Fasteners (SCQF credit 22, SCQF Installing aircraft mechanical fasteners Producing Aircraft Detail Assemblies (SCQF credit 28, SCQF Producing aircraft detail assemblies Preparing and Using Lathes for Turning Operations (SCQF credit 29, SCQF Preparing and using lathes for turing operations Preparing and Using Milling Machines (SCQF credit 28, SCQF Preparing and using milling machines Preparing and Using Grinding Machines (SCQF credit 31, SCQF Preparing and using grinding machines Preparing and Proving CNC Machine Tool Programs (SCQF credit 30, SCQF Preparing and proving CNC machine tool programs Preparing and Using CNC Turning Machines (SCQF credit 34, SCQF Preparing and using CNC turning machines Preparing and Using CNC Milling Machines (SCQF credit 34, SCQF Preparing and using CNC milling machines Preparing and Using CNC Machining Centres (SCQF credit 34, SCQF Preparing and using CNC machining centres Maintaining Mechanical Devices and Equipment (SCQF credit 31, SCQF Maintaining mechanical devices and equipment Assembling and Testing Fluid Power Systems (SCQF credit 36, SCQF Assembling and testing fluid power systems Maintaining Fluid Power Equipment (SCQF credit 36, SCQF Maintaining fluid power equipment Producing Sheet Metal Components and Assemblies (SCQF credit 25, SCQF Producing sheet metal components and assemblies Producing Platework Components and Assemblies (SCQF credit 36, SCQF Producing platework components and assemblies Cutting and Shaping Materials Using Thermal Cutting Equipment (SCQF credit 36, SCQF level Cutting and shaping materials using thermal cutting equipment Preparing and Proving CNC Fabrication Machine Tool Programs (SCQF credit 31, SCQF level
3 Preparing and proving CNC fabrication machine tool programs Preparing and Using CNC Fabrication Machinery (SCQF credit 34, SCQF Preparing and using CNC fabrication machinery Preparing and Using Manual Metal Arc Welding Equipment (SCQF credit 29, SCQF Preparing and using manual metal arc welding equipment Preparing and Using Manual TIG or Plasma-Arc Welding Equipment (SCQF credit 33, SCQF Preparing and using manual TIG or plasma-arc welding equipment Preparing and Using Manual MIG, MAG and Other Continuous Wire Welding Equipment (SCQF credit 34, SCQF Preparing and using manual MIG, MAG and other continuous wire welding equipment Preparing and Using Manual Gas Welding Equipment (SCQF credit 29, SCQF Preparing and using manual gas welding equipment Preparing and Using Manual Flame Brazing and Bronze Welding Equipment (SCQF credit 30, SCQF Preparing and using manual flame brazing and bronze welding equipment **Producing Electrical or Electronic Engineering Drawings Using a CAD System (SCQF credit 32, SCQF Producing electrical or electronic engineering drawings using a CAD system Wiring and Testing Electrical Equipment and Circuits (SCQF credit 32, SCQF Wiring and testing electrical equipment and circuits Forming and Assembling Electrical Cable Enclosure and Support Systems (SCQF credit 27, SCQF Forming and assembling electrical cable enclosure and support systems Assembling, Wiring and Testing Electrical Panels/Components Mounted in Enclosures (SCQF credit 31, SCQF Assembling, wiring and testing electrical panels/components mounted in enclosures Assembling and Testing Electronic Circuits (SCQF credit 32, SCQF Assembling and testing electronic circuits Maintaining Electrical Equipment/Systems (SCQF credit 34, SCQF Maintaining electrical equipment/systems Maintaining Electronic Equipment/Systems (SCQF credit 34, SCQF Maintaining electronic equipment/systems Maintaining and Testing Process Instrumentation and Control Devices (SCQF credit 32, SCQF Maintaining and testing process instrumentation and control devices Wiring and Testing Programmable Controller Based Systems (SCQF credit 33, SCQF
4 Wiring and testing programmable controller based systems Using Wood for Pattern, Modelmaking and Other Engineering Applications (SCQF credit 29, SCQF Using wood for pattern, modelmaking and other engineering applications Assembling Pattern, Model and Engineering Woodwork Components (SCQF credit 27, SCQF Assembling pattern, model and engineering woodwork components Producing Composite Mouldings Using Wet Lay-Up Techniques (SCQF credit 32, SCQF level Producing composite mouldings using wet lay-up techniques Producing Composite Mouldings Using Pre-Preg Laminating Techniques (SCQF credit 32, SCQF Producing composite mouldings using pre-preg laminating techniques Producing Composite Mouldings Using Resin Infusion Techniques (SCQF credit 32, SCQF Producing composite mouldings using resin infusion techniques Producing Composite Assemblies (SCQF credit 28, SCQF Producing composite assemblies Finishing Surfaces by Applying Coatings or Coverings (SCQF credit 29, SCQF Finishing surfaces by applying coatings or coverings Carrying Out Heat Treatment of Engineering Materials (SCQF credit 27, SCQF Carrying out heat treatment of engineering materials Carrying Out Hand Forging of Engineering Materials (SCQF credit 27, SCQF Carrying out hand forging of engineering materials **Producing CAD Models (Drawings) Using a CAD System (SCQF credit 33, SCQF Producing CAD models (drawings) using a CAD system There may be publications available to support this qualification. For more information, please contact: Excellence, Achievement & Learning Limited National Verification Centre 3365 Century Way Thorpe Park Leeds LS15 82B Tel: Fax: Website:
5 Ã Â Scottish Qualifications Authority 2013
QUALIFICATION HANDBOOK
QUALIFICATION HANDBOOK Level 3 NVQ Extended Diploma in Engineering Maintenance (1788) May 2014 Version 3.0 Qualification at a glance Subject area City & Guilds number 1788 Age group approved 18+, 19+ Entry
More informationQUALIFICATION HANDBOOK
QUALIFICATION HANDBOOK Level 3 NVQ Extended Diploma in Engineering Maintenance (1788-80) August 2013 Version 1.0 Revised version for registrations from August 1 st 2013 Qualification at a glance Subject
More informationAssessor s Guidelines for SVQ1 Performing Engineering Operations and SVQ2 Performing Engineering Operations SCQF level 5
Assessor s Guidelines for SVQ1 Performing Engineering Operations and SVQ2 Performing Engineering Operations SCQF level 5 Publication date: February 2013 Publication code: DB6013/2 The information in this
More informationReal Time Cost Impact Assessment of Composite and Metallic Design Alternatives. Dr. Christopher Rush Joe Falque Karen McRitchie
Real Time Cost Impact Assessment of Composite and Metallic Design Alternatives Dr. Christopher Rush Joe Falque Karen McRitchie Overview Introduction Composite Structures New Challenges Background and Related
More informationCity & Guilds Level 3 Certificate in Engineering
City & Guilds Level 3 Certificate in Engineering Scheme handbook 2800 Version 1.3 March 2006 Publications and enquiries The publications listed below are available free of charge from Publications Sales
More informationLevel 4 NVQ Extended Diploma in Engineering Leadership (9220-41)
QUALIFICATION HANDBOOK Level 4 NVQ Extended Diploma in Engineering Leadership (9220-41) Performing Engineering Operations Units January 2013 Version 1.0 Contents 1 Units 5 Unit 202 Unit 203 Producing mechanical
More informationTABLE 1A. Educ ation and Wage s Group: Machine Technology Region: Southwest Minnesota
TABLE 1A. Educ ation and Wage s Group: Machine Technology Education Level Median Wage Computer Numerically Controlled Machine Tool Programmers, High school diploma or equivalent $21.40 Metal and Plastic
More informationMEM30205 Certificate III in Engineering Mechanical Trade
MEM30205 Certificate III in Engineering Mechanical Trade MEM20205 Certificate II in Engineering Production Technology or other relevant qualifications. Credit towards this qualification may also include
More informationIntroduction to Manufacturing Process
Introduction to Manufacturing Process What is Manufacturing? The English word manufacture is several centuries old. The term manufacture comes from two Latin words, manus (hand) and factus (make). As per
More informationManufacturing Technology Associate in Applied Science Field of Study Code: MANUF.AAS
Manufacturing Technology Associate in Applied Science Field of Study Code: MANUF.AAS Catalog Description: The Manufacturing Technology program provides training in a wide variety of skill areas of product
More informationPrecision components from start to finish. Excellence. in performance-critical machining & fabrications
Precision components from start to finish Excellence in performance-critical machining & fabrications Leading precision machining technology... Fully integrated solutions Facilities and capabilities The
More informationArrangements for: SCQF level 5 Group Awards
Arrangements for: SCQF level Group Awards G988 4: National Certificate in Electrical Engineering G98D 4: National Certificate in Electronic Engineering G98 4: National Certificate in Fabrication and Welding
More informationGRCC Manufacturing Technology
Grand Rapids Community College GRCC Manufacturing Technology Plastics Manufacturing Quality Science Tooling and Manufacturing Welding 1 www.grcc.edu G r a n d R a p i d s C o m m u n i t y C o l l e g
More informationEngineering Graduate Training Scheme "A" Manufacturing & Industrial Engineering. Model Training Guide
Engineering Graduate Training Scheme "A" Manufacturing & Industrial Engineering Model Training Guide 1 Model Training Guide (MTG) The Model Training Guide is, as the name suggests, a guide to Companies
More informationQUALIFICATION HANDBOOK
QUALIFICATION HANDBOOK Level 3 NVQ Diploma in Mechanical Manufacturing Engineering (Composite Manufacture Engineering) (1712-35) August 2011 Version 1.0 Qualification at a glance Subject area City & Guilds
More informationINDUSTRIAL TECHNOLOGY EDUCATION
INDUSTRIAL TECHNOLOGY EDUCATION All students can benefit from study in an area of Industrial Technology. Classes can bring satisfying and worthy utilization of leisure and hobby time. Beyond this, many
More informationAlibre CAM: Changing Businesses, One Shop at a Time
Alibre CAM: Changing Businesses, One Shop at a Time Not to toot our own horn, but we hear success stories all the time about how our customers have utilized our software in effective ways, and how it s
More informationTraining for a Brighter Future. Engineering Centre of Excellence
Training for a Brighter Future Engineering Centre of Excellence Interested in Engineering? Want a very highly paid job and career progression that can take you right to the top? Want to Earn as you Learn
More informationNational Certificate in Heating, Ventilating, and Air Conditioning (Mechanical Services) (Level 4) Level 4
NZQF NQ Ref 0124 Version 6 Page 1 of 12 National Certificate in Heating, Ventilating, and Air Conditioning (Mechanical Services) (Level 4) Level 4 Credits 254 This qualification has been reviewed. The
More informationExamination Regulations for the Bachelor Degree Program Mechanical Engineering at RWTH Aachen University
Examination Regulations for the Bachelor Degree Program Mechanical Engineering at RWTH Aachen University Attachment 3 Guidelines for the practical training 1 Goal of internship For a sufficient understanding
More informationAgricultural Mechanics COURSE OUTLINE
Agricultural Mechanics COURSE OUTLINE 1. Course Title: Agricultural Mechanics 2. CBEDS Title: Mechanics and Engineering Technology 3. CBEDS Number: 4030 4. Job Titles: Farm Machine Operator Farm Machine
More informationWinchester College Design Technology
Winchester College Design Technology The Staff Simon Tarrant Head of Department David Yeomans Adrian Ahmed Trevor Ward Harley Zblewski Our Philosophy Key words teach Inspire Independent learning relevant
More informationINTRODUCTION. Dear Business Partners,
INTRODUCTION Dear Business Partners, We are proud to issue the new catalogue of STROJFERR s.r.o. which was established in 1997 as a genuinely Czech company. In its activities and production programme,
More informationNational Certificate in Mechanical Engineering Technology (Level 1) Level 1
NZQF NQ Ref 1263 Version 2 Page 1 of 5 National Certificate in Mechanical Engineering Technology (Level 1) Level 1 Credits 40 This qualification has been reviewed. The last date to meet the requirements
More informationWho can do an SVQ? How they work
A guide to SVQs What are SVQs? Scottish Vocational Qualifications (SVQs) are based on national standards which are drawn up by people from industry, commerce and education. SVQs are badges or benchmarks
More informationAUR32112 Certificate III in Automotive Body Repair Technology
AUR32112 Certificate III in Automotive Body Repair Technology Release: 1 AUR32112 Certificate III in Automotive Body Repair Technology Modification History Release Release 1 Comment Replaces AUR30805 Certificate
More informationPERSONAL PROTECTIVE EQUIPMENT PROGRAM
Sample Written Program For PERSONAL PROTECTIVE EQUIPMENT PROGRAM 1 TABLE OF CONTENTS Development... 3 Hazard Assessment........3 Choosing Personal Protective Equipment.......4 Training.......4 Conclusion...4
More informationTexas Department of Insurance. Provided by. Personal Protective Equipment. Division of Workers' Compensation HS96-101C (10-06)
Texas Department of Insurance Personal Protective Equipment Provided by Division of Workers' Compensation HS96-101C (10-06) PERSONAL PROTECTIVE EQUIPMENT PROGRAM TABLE OF CONTENTS Development...3 Hazard
More informationWelding & Fabrication. School of Mechanical & Environmental Engineering
Welding & Fabrication School of Mechanical & Environmental Engineering Your Local College The facts 14,000 students meet new people 3 Centres all easy to access Hundreds of courses something for everyone
More informationInstructional Programs Eligible for College Occupational Grant Program Minnesota Two-Year State Colleges Active Programs in Fall Semester 2016 for
Instructional Programs Eligible for College Occupational Grant Program Minnesota Two-Year State Colleges Active Programs in Fall Semester 2016 for Hennepin Technical College This list was posted December
More informationTraining Needs Assessments Chart. Index of Training Requirements Job Description: or Employee:
1910.1200 Hazard Communication HAZCOM 1910.147 The Control of Hazardous Energy, Lock-out/Tag-Out 1910.212 Machines, General Requirements 1910.305 Electrical, Wiring Methods, Components & Equip. 1910.132
More informationQUALIFICATION HANDBOOK
QUALIFICATION HANDBOOK Level 3 NVQ Diploma in Mechanical Manufacturing Engineering (CNC Machining) (1712-31) September 2011 Version 1.0 Qualification at a glance Subject area City & Guilds number 1712-31
More informationTechnical Services & Capabilities
Technical Services & Capabilities Machining Welding MIG TIG Robotic TIG Friction Stir Welding Solution Heat Treat & Artificial Aging Assemblies & Fabrication Bike Frame Specialists Technical Services Product
More informationTRANSPORTATION MANUFACTURING CAREER PATHWAY
TRANSPORTATION MANUFACTURING CAREER PATHWAY The work of the Talent Pipeline Task Force was inspired by our community s existing assets in the areas of education and workforce. Members consist of a diverse
More informationChapter 5 - Aircraft Welding
Chapter 5 - Aircraft Welding Chapter 5 Section A Study Aid Questions Fill in the Blanks 1. There are 3 types of welding:, and, welding. 2. The oxy acetylene flame, with a temperature of Fahrenheit is produced
More informationNingbo Yinzhou Keao Prototyping & Mould Factory Services include : CNC machining prototypes,
Ningbo Yinzhou Keao Prototyping & Mould Factory Services include : CNC machining prototypes, STEREOLITHOGRAPHY (SLA) Selective Laser Sintering (SLS) RTV MOLDING AND CAST URETHANE PROTOTYPES Tel : +86 574
More informationwww.cofan-pcb.com with Concurrent Engineering
with Concurrent Engineering Metal Core PCB Fabrication Heat Sinks & Heat Pipes Enclosures (Plastic and Metal Alloys) SMT & Through Hole PCB Assembly Final Integration & Test Services www.cofan-pcb.com
More informationQUALIFICATION HANDBOOK
QUALIFICATION HANDBOOK Level 3 NVQ Diploma in Engineering Technical Support (Computer Control Programming) (1786-33) September 2011 Version 1.0 Qualification at a glance Subject area City & Guilds number
More information. company with a tradition of more than 70 years.
. company with a tradition of more than 70 years. DESIGN CHECKING PATTERN SHOP TOOL SHOP FIRM The history of the carpentry firm begins in the years of World War II. At first, three to eight employees were
More informationLIST OF STANDARDIZED COURSES
LIST OF STANDARDIZED COURSES 1.List Of Entrepreneurship Development Programmes, Entrepreneurship Cum Skill Development Programmes & Training Of Trainers Programmes S.No. EDPs 1. CRR Scheme for CPSUs 2.
More informationSIMPLE, EFFECTIVE PERFORMANCE RIBS: DEVELOPMENT OF PRODUCTION ORIENTATED ADVANCED COMPOSITE RIBS
SIMPLE, EFFECTIVE PERFORMANCE RIBS: DEVELOPMENT OF PRODUCTION ORIENTATED ADVANCED COMPOSITE RIBS Dr M A Hobbs, SP, UK SUMMARY Advanced composites using epoxy resin and carbon fibre reinforcements can bring
More informationFactors to Consider Before Buying a Motion Picture Book
Technical and Multimedia Education Courses The Technical and Multimedia Education Department offers courses in the areas of communications, energy, transportation, construction and manu facturing. Students
More informationQuality Expertise Affordable prices
MILESTONES Marostech Kft. is founded as a German- Hungarian joint venture 100% of the company becomes Hungarian-owned Implementing ISO 9001 quality management system Purchasing a machining center and some
More informationCHAPTER 5. OVERVIEW OF THE MANUFACTURING PROCESS
CHAPTER 5. OVERVIEW OF THE MANUFACTURING PROCESS 5.1 INTRODUCTION The manufacturing plant considered for analysis, manufactures Printed Circuit Boards (PCB), also called Printed Wiring Boards (PWB), using
More informationhttp://www.180skills.com/
http://www.180skills.com/ Revised April 2012 Copyright 2012 180 Skills LLC All Rights Reserved This document and its content is copyright of 180 Skills LLC 2011. All rights reserved. Any redistribution
More informationModel Curriculum. CNC Programmer SECTOR: SUB-SECTOR:
Model Curriculum CNC Programmer SECTOR: SUB-SECTOR: OCCUPATION: REF. ID: NSQF LEVEL: CGSC MACHINE TOOLS DIES,MOULDS AND PRESS TOOLS PLASTICS MANUFACTURING MACHINERY TEXTILE MANUFACTURING MACHINERY PROCESS
More informationKeywords: Baltic, Baltikum, Estonia, Latvia, Lithuania, Tallinn, Riga, Vilnius, Estland, Letland, Litauen, Machines, Sub-Contracting, Metal
Keywords: Baltic, Baltikum, Estonia, Latvia, Lithuania, Tallinn, Riga, Vilnius, Estland, Letland, Litauen, Machines, Sub-Contracting, Metal Abstract: A breif overview of the Machines Industry and Sub-Contracting
More informationMEM23131A Evaluate rapid prototyping applications
MEM23131A Evaluate rapid prototyping applications Release: 1 MEM23131A Evaluate rapid prototyping applications Modification History Release 1 (MEM05v9). Unit Descriptor This unit of competency covers the
More informationNational 5 Engineering Skills: Skills for Work Course Specification
National 5 Engineering Skills: Skills for Work Course Specification Valid from August 2013 This edition: October 2013, version 2.0 This specification may be reproduced in whole or in part for educational
More informationALIKO Oy Ltd. Finn-Power Oy
ALIKO Oy Ltd Huhmarinmäentie 38 FIN-31700 Urjala, Finland Tel. +358 20 728 0370 Fax +358 20 728 0389 http://www.aliko.fi CNC Press brakes CNC Guillotine shears Water jet cutting systems Plasma cutting
More informationFRICTION MATERIALS & BONDING SERVICES
FRICTION MATERIALS & BONDING SERVICES World Class Friction Materials & Bonding Services The Industry Leader Midwest Brake has been a leading supplier of non asbestos industrial friction material and bonding
More informationCITY OF LOS ANGELES PERSONNEL DEPARTMENT CAREER OPPORTUNITIES FOR MECHANICAL HELPER
CITY OF LOS ANGELES PERSONNEL DEPARTMENT CAREER OPPORTUNITIES FOR MECHANICAL HELPER This information is being given to you to describe potential opportunities as a Helper. The career ladders that Helpers
More informationSEMMPA39 Perform stocktaking operations for metal products
Overview This unit is about performing stocktaking operations for the control of metal products. This involves ensuring 1. you carry out comparisons of actual stock with documented information 2. you identify
More informationindustrial & engineering technology
Automotive Construction Engineering Graphics HVAC Horticulture Industrial Electronics Industrial Supervision Machine Tool Mechatronics Welding industrial & engineering technology Automotive Technology
More informationINDIAN STANDARDS (BIS) ON WELDING
** IS 82:957 Glossary of terms relating to welding and cutting of Sep 2008 metals 2 IS 83:986 Scheme of symbols for welding (revised) Sep 2008 3 IS 84:2004 Covered electrodes for manual metal arc welding
More informationManual Arts (Industrial Technology & Design)
Manual Arts (Industrial Technology & Design) Industrial Technology Industrial technology and design involves the design and manufacture of products, systems and graphical representations. Industrial technology
More informationDefinition of skill lists and engineering levels at Innomet system
Definition of lists and engineering levels at Innomet system Work package 4.1&4.3 Document No.: INNOMET II D4.1&D4.3 Status: Final Report INNOMET II WP4.1&4.3 Authors: Name Organisation E-mail Jyri Riives
More informationDOCUMENTATION FOR QUALIFICATION SYSTEM
DOCUMENTATION FOR QUALIFICATION SYSTEM MATERIAL GROUP: PRESSURE EQUIPMENT MAINTENANCE, REPAIR INTERNAL CODE OF MATERIAL GROUP: MM10300 New code according the registration on myhome: MMGV03 CPV CODE: 45259000-7,
More informationEUROPASS CERTIFICATE SUPPLEMENT
EUROPASS CERTIFICATE SUPPLEMENT TITLE OF THE DIPLOMA (ES) Técnico en Mantenimiento y Control de la Maquinaria de Buques y Embarcaciones TRANSLATED TITLE OF THE DIPLOMA (EN) (1) Technician in Maintenance
More informationSEOUL SEMICONDUCTOR LED COOLING. ZC series COB LED modules. Validated Thermal Designs Adaptable to your Needs Functional & Aesthetic
SEOUL SEMICONDUCTOR LED COOLING ZC series COB LED modules ZC6 / ZC12 / ZC18 / ZC25 / ZC40 / ZC60 / ZC100 Validated Thermal Designs Adaptable to your Needs Functional & Aesthetic An introduction MechaTronix
More informationFree Examples of plant layout drawing
Free layout examples; a wide variety of industrial layouts, within different facility types. Principles of plant layout and design will apply widely. Free Examples of plant layout drawing Principles of
More informationPrograms of Study. Architecture and Construction
AIR CONDITIONING & REFRIGERATION 117 Associate in Applied Science Degree (A.A.S.) 62 Credit Hours (CH) The A.A.S. in Air Conditioning and Refrigeration studies the design, selection, maintenance, testing
More informationCOMPLETE SOLUTIONS IN CONTRACT MANUFACTURING
COMPLETE SOLUTIONS IN CONTRACT MANUFACTURING REAL ESTATE ASSEMBLY WORKS METAL WORKING SURFACE COATING Main facts about DAMBIS Employees: 2015 62 Turnover: 2011 3,6 million Euro 2012 3,6 million Euro 2013
More informationManufacturing Programs Offered for Year 2013-2014
Manufacturing Programs Offered for Year 2013-2014 Click on your Plan. Go to that page. Corrosion Technology Manufacturing Engineering Technology - Corrosion Science Technology Specialization - AAS 2 Atmospheric
More informationEngineering Trades. www.weltec.ac.nz
1 Engineering & Electrical Trades High-tech equipment and specialist facilities Industry focused with real world projects Trained tutors with vast industry experience Wide range of career opportunities
More informationMechanical Engineering Technologies
Technologies 1 Technologies Graduates of the Technology program are prepared to design mechanical systems, operate CAD systems, manage design projects, and perform product testing. Examples of graduate
More informationEUROPASS DIPLOMA SUPPLEMENT
EUROPASS DIPLOMA SUPPLEMENT TITLE OF THE DIPLOMA (ES) Técnico Superior en Diseño en Fabricación Mecánica TRANSLATED TITLE OF THE DIPLOMA (EN) (1) Higher Technician in Mechanical Manufacture Design --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
More informationDevelopment/ 3D Modelling Calculations and Sizing Design Eco-design Expert knowledge Software Virtual prototyping Simulation.
BUSINESS FIELDS REPRESENTED: Studies and development Equipment supply Raw materials Additive manufacturing Rapid prototyping Design and manufacture of rapid tooling and / or prototype molds Laboratory
More informationZakład Metalowy ALEM. Kołobrzeska 19, 72-320 Trzebiatów, Poland www.alem.pl
Zakład Metalowy ALEM Kołobrzeska 19, 72-320 Trzebiatów, Poland www.alem.pl We as ALEM have many years of experience in processing metals. We offer you a high variety of services in machining, electrical
More informationHuffman Welding & Machine, Inc.
6224 Avenue O Fort Madison, IA 52627 Phone: 319-372-7232 Fax: (319) 372-3469 www.huffmanwelding.com - Tool & Die, Fabrication, Sheet Metal, Electrical - - Millwright - - Industrial Maintenance - - Automated
More informationNORTHFIELD METAL PRODUCTS
NORTHFIELD METAL PRODUCTS CUSTOM METAL & PLASTIC COMPONENT MANUFACTURING SINCE 1974 PROGRESS through engineering & design WHO WE ARE Northfield Metal Products, located in Waterloo Ontario Canada, has been
More informationVDL Groep. Strength. through co-operation
VDL Groep Strength through co-operation VDL The establishment in 1953 of Metaalindustrie en Constructiewerkplaats P. van der Leegte laid the basis for what today is the VDL Groep. Over time, this enterprise
More informationCOMMERCIAL BUILDING APPLICATIONS
EXPANDED POLYSTYRENE FOR COMMERCIAL BUILDING APPLICATIONS www.falconfoam.com Commercial Building Ap Expanded Polystyrene Insulation Falcon Foam leads the commercial building industry with products that
More informationINSTRUMENTATION & CONTROLS VALVE & AUTOMATION EXPERTS VALVE REPAIR TUBE SERVICES
INSTRUMENTATION & CONTROLS VALVE & AUTOMATION EXPERTS VALVE REPAIR TUBE SERVICES GREAT PRODUCTS ARE ONLY PART OF OUR SUCCESS. YOU SHOULD MEET OUR PEOPLE. From the machinist with over 20 years experience
More informationETCAL Level 3 NVQ Diploma in Engineering Technical Support (QCF) Qualification No 600/2285/1 Credit Value 80 GLH 311. Qualification Structure
ETCAL Level 3 NVQ Diploma in Engineering Technical Support (QCF) Qualification No 600/2285/1 Credit Value 80 GLH 311 Qualification Structure Unit Number Unit Title Unit Credit Value/GLH QCF Unit Number
More informationPROGRAMME REGULATIONS. Programme Schedule. Certificate in Applied Technology. 1. Regulations for the Certificate. 2. Programme Specific Admission
PROGRAMME REGULATIONS Programme Schedule Certificate in Applied Technology To be read in conjunction with Unitec Generic Certificate Regulations. 1. Regulations for the Certificate These regulations apply
More informationNational Guide to College Credit for Workforce Training
Heating, Ventilation, and Air Conditioning (HVAC) Curriculum Metal Apprenticeship: HVAC Curriculum ACE Transcript Data: SMAC-0003 Location: Various sites in the United States and Canada. Length: 458 hours
More informationEUROPASS CERTIFICATE SUPPLEMENT
EUROPASS CERTIFICATE SUPPLEMENT TITLE OF THE DIPLOMA Técnico en Instalaciones Frigoríficas y de Climatización TRANSLATED TITLE OF THE DIPLOMA (EN) (1) Technician in Refrigeration and Air Conditioning Installations
More information2006 Bachelor s of Fine Arts: Glass & Ceramics, Bowling Green State University, Bowling Green, OH. EXPERIENCE
Michael Lorsung 604 Moore St. / Baton Rouge, LA 70806 Tel: 225-302-1518 / mlorsung@gmail.com EDUCATION 2006 Bachelor s of Fine Arts: Glass & Ceramics, Bowling Green State University, Bowling Green, OH.
More informationConstruction. Using today s standards to build the future
Construction Using today s standards to build the future British Standards Online (BSOL) About BSI BSI (British Standards Institution) is the business standards company that equips businesses with the
More informationGood Boards = Results
Section 2: Printed Circuit Board Fabrication & Solderability Good Boards = Results Board fabrication is one aspect of the electronics production industry that SMT assembly engineers often know little about.
More informationHUMBER COLLEGE. Mechanical Engineering Technician Co-op
HUMBER COLLEGE Mechanical Engineering Technician Co-op Courses Required COMM 213 Technical Communications 1 3 MECH 106 Workshop Practice 0 MECH 120 Blueprint Reading Freehand Sketching 4 MECH 207 Engineering
More informationGCSE Design and Technology: Resistant Materials Technology
are suggestions and ideas about how you might deliver GCSE Design and Technology: Resistant Materials Technology. You can use these suggestions, adapt them to better suit your students or use your own
More informationDESIGN PROTOTYPE TOOL & DIE BUILD PRODUCTION SERVICE & SUPPORT
DESIGN PROTOTYPE TOOL & DIE BUILD PRODUCTION SERVICE & SUPPORT THE PTM ADVANTAGE PTM has been producing metal stampings since 1972. Our expertise and experience is wide ranging, to include detail part
More informationQUALITY ENGINEERING & SERVICES W.L.L (A DIVISION OF QUALITY GROUP OF COMPANIES) ISO 9001 : 2008 CERTIFIED COMPANY COMPANY PROFILE
QUALITY ENGINEERING & SERVICES W.L.L (A DIVISION OF QUALITY GROUP OF COMPANIES) ISO 9001 : 2008 CERTIFIED COMPANY COMPANY PROFILE FABRICATION, MACHINING, METAL CASTING, LOAD TESTING, SAND BLASTING & PAINTING,
More informationQualification of Auditor and Lead Auditor to perform an assessment according NSQ-100
Page 1 / 11 ABSTRACT Qualification of Auditor and Lead Auditor to CONTENTS 0. GENERAL... 2 0.1. Purpose... 2 0.2. Scope of application... 2 0.3. References... 2 0.4. Terminology... 2 1. SECTIONS... 2 1.1.
More informationPRODUCT DEVELOPMENT FOR OUT- OF-AUTOCLAVE (OOA) MANUFACTURE OF AEROSPACE STRUCTURES
PRODUCT DEVELOPMENT FOR OUT- OF-AUTOCLAVE (OOA) MANUFACTURE OF AEROSPACE STRUCTURES Steve Mortimer, Matthew J. Smith Hexcel Duxford, Cambridgeshire, UK Elizabeth Olk Hexcel Dublin, California, USA Overview
More informationThe Coating Machinery Experts Supplier Questionnaire
Date: Completed by: Company Data 1.1 General Data Full company name, legal form and address: Short form of company name: Country: USt. ID/ VAT Reg./ N.IVA/ NIPIC/ UID Nr./ ID TVA: Company homepage: www.
More informationSafe Operating Procedure
Safe Operating Procedure (Revised 07/09) HOT WORK PERMIT OPERATIONS (For assistance, please contact EHS at (402) 472-4925, or visit our web site at http://ehs.unl.edu/) Authority In recognition of the
More informationWORD DEFINITION WORD (NATIONAL LANGUAGE)
WELDING GLOSSARY The Glossary has been created as part of the Migration for Development in the Western Balkans (MIDWEB) project, which received financial assistance from the European Commission IPA 2009
More informationSupplement to the VISUAL ARTS 8 TO 10 IRP (1995) Required Program Model Content for Visual Arts 10:
Supplement to the VISUAL ARTS 8 TO 10 IRP (1995) Required Program Model Content for Visual Arts 10: Ceramics and Sculpture Drawing and Painting Media Arts Province of British Columbia Ministry of Education
More informationUmgungundlovu Fet College offers a wide variety if workshop courses which give the student practical experience of the work environment
Page 1 Umgungundlovu Fet College offers a wide variety if workshop courses which give the student practical experience of the work environment Duration for workshop courses: 1 trimester (10 weeks) Workshops
More informationComposite Panel Firewall Systems
Composite Panel Firewall Systems part of the Protecting more than your business Insulated mineral fibre panels have excellent thermal and acoustic properties, ideal for factory and office partition walls.
More informationNorth Central Region Occupations Approved for Individual Training Scholarships
North Central Region Occupations Approved for Individual Training Scholarships High Priority Occupations for Scholarship Assistance Healthcare Registered Nurses Nursing Assistants Licensed Practical and
More informationThermal Management Solutions for Printed Circuit Boards used in Digital and RF Power Electronics and LED assemblies
Thermal Management Solutions for Printed Circuit Boards used in Digital and RF Power Electronics and LED assemblies Sandy Kumar, Ph.D. Director of Technology American Standard Circuits, Inc 3615 Wolf Road
More informationSample Career Ladder/Lattice for Advanced Manufacturing
Click on a job title to see examples of descriptive information about the job. Click on a link between job titles to see the critical development experiences needed to move to that job on the pathway.
More informationCOURSE CURRICULUM COURSE TITLE: ESTIMATING, COSTING AND ENGINEERING CONTRACTING (COURSE CODE: 3351905)
GUJARAT TECHNOLOGICAL UNIVERSITY, AHMEDABAD, GUJARAT COURSE CURRICULUM COURSE TITLE: ESTIMATING, COSTING AND ENGINEERING CONTRACTING (COURSE CODE: 3351905) Diploma Programme in which this course is offered
More informationAdditive Manufacturing: Processes and Standard Terminology
Additive Manufacturing: Processes and Standard Terminology Gary Coykendall Copyright Edmonds Community College 2012; Permission granted for use and reproduction for educational purposes only. Abstract
More informationMETRA BLANSKO - History
1 METRA BLANSKO - History 2 METRA BLANSKO a.s. is the company with over 100 years history. Company was established by Czech engineer Mr. Erich Roucka in 1911 as the first factory for electrical measurement
More information