An extensive fabric range for protection and performance

Transcription

1 An extensive fabric range for protection and performance Ahlstrom TrustShield EN standard

2 Key benefits High Performance Non-critical zone (according to EN13795 standards) - B13A743 (SMS) - B13A750 (SMS) for a cleaner operating room floor in high fluid surgeries to avoid fluid penetration in low fluid surgeries Impervious, creating a total barrier to bacteria and viruses to better protect patients from infection High Performance (according to EN13795 standards) Comfort (Tri-laminate) Soft (Bi-laminate) Eco (Coated SMS) Fabrics offer high strength to avoid puncture and tear during manufacturing and use Superior quality surgical drapes Conventional reusable linen drapes do not offer consistent performance to prevent infection think of tears and holes during washing and mending. Ahlstrom's complete range of single-use surgical fabrics provide the same superior barrier protection in every use viral, bacterial, particulate and fluid. They significantly reduce the risk of Hospital Acquired Infections (HAIs), making life safer for clinicians and patients. Compliant with EN 13795, providing minimum safety standards in every use Flexible fabric designs for a wide range of draping needs Easy to handle, sturdy and easy to convert Virtually no lint means no carrier for bacteria to move about the operating room Ahlstrom TrustShield Higher performance fabrics for better surgery outcomes In the operating room, the success of a surgery is a combination of several factors and choosing the right surgical drape is one of them. Fabric barrier and strength are key requirements for surgical drapes, yet other properties such as drapeability, puncture resistance and linting must be taken into account to protect the patient and not interfere with the surgery. Protecting patients from simple to very high risk surgeries Ahlstrom offers a complete range of single-use medical fabrics designed to deliver highest levels of protection and meet all requirements of surgical drape applications. Our portfolio of technologies offer a variety of materials ranging from film-based composites to SMS (spunbond/meltblown/spunbond). Our drape fabrics are available in a range of compositions, weights and colors -- and their properties can be tailored to match specific performance requirements. Ahlstrom's full offering for drapes and ability to customise can be discussed with our sales and technical team. Flexible and strong for drape manufacturers Our fabrics are suited for a variety of converting methods - heat seal, ultrasonic bonding, adhesives. These virtually lint-free fabrics deliver consistent barrier performance through manufacturing and sterilization (EtO and plasma) as well as in the operating theater. Regulatory - EN End use Comfort Tri-laminate comfort Soft Bi-laminate soft Eco Coated SMS eco B13A750 SMS Non-critical zone Medium risk B13A743 SMS Non-critical zone Low risk Draping Heavier Lighter Lighter Lighter Lighter Fluid management Aesthetics Strong & good Soft & rich Light & uniform Uniform Basis weigth (g) Construction SB/glue/PE Film/SB SMS/Glue/PE film SMS/PE film SMS SMS Uniform

3 Impervious and absorbent fabrics are designed to comply with the demands of drapes for high risk surgeries, such as orthopedic or cardiovascular. Due to absorbency, wet strength, puncture resistance, virtually no lint, antistatic treatment and comfort layer when needed, Ahlstrom's laminates offer the best solution for performance and cost. They also offer reliable protection and simplified logistics when compared to the reusable drapes. fabrics are ideal for drapes designed for surgeries lower risk surgeries or surgeries with minimum amount of fluids. Due to its excellent barrier properties and repellency to low tension liquids and antistatic treatment SMS fabrics offer the right balance between performance and cost Comfort Soft Eco B13A743 / B13A750 - Comfort layer on patient side - Strong and reliable - Clean virtually no lint - Puncture resistant - Aesthetically pleasant / Uniform - Very drapeable - Uniform - Lower cost - Protection against low surface tension liquids (alcohol repellency) - Drapeable - Reliable protection - Clean virtually no lint - Passes EN standard performance and high performance less critical area Physical properties (EN 13795) Method Typical values Comfort Soft Eco Typical values Physical properties (EN 13795) Method B13A743 B13A750 Basis weight (g/m 2 ) ASTM D Basis weight (g/m2) ASTM D Res. Microbial penetration Dry (cfu) ISO * 0 Res. Microbial penetration Wet (I B ) ISO * 6.0 Cleanliness microbial (Log10 (cfu/dm²)) EN <5 * 10 Cleanliness - particulate (IPM) ISO * 2.1 Linting (Log10 (lint count)) ISO * 2.2 Resistance to liquid / Hydrohead (cm) EN20811 > 150 >150 >150 Bursting Strength Dry (kpa) EN >200 >200 Bursting Strength Wet (kpa) EN >200 >200 Tensile Dry MD (N) EN Tensile Dry CD (N) EN Tensile Wet MD (N) EN Tensile Wet CD (N) EN Res. Microbial penetration Dry (cfu) ISO Res. Microbial penetration Wet (I B ) ISO Cleanliness microbial (Log10 (cfu/100 cm²)) EN ISO / EN Cleanliness - particulate (IPM) ISO Linting (Log10 (lint count)) ISO Resistance to liquid / Hydrohead (cm) EN Bursting Strength Dry (kpa) EN ISO Bursting Strength Wet (kpa) EN ISO Tensile Dry MD (N) EN Tensile Dry CD (N) EN Tensile Wet MD (N) EN Tensile Wet CD (N) EN Surface Resistivity (Ω/square) WSP

4 Why choose us? State of the art product Our in-depth knowledge of the medical industry and healthcare field help us understand our clients needs and goals better. We partner with leading businesses around the world to help them stay ahead. Service & support Where ever you are based in the world, there is an Ahlstrom presence to serve and assist you. Our customer service specialists provide a seamless interface for commercial activities, while our dedicated Technical service teams provide product and regulatory support. Environmentally responsible We are constantly looking for ways to produce our medical fabrics more efficiently by reducing waste, saving energy and minimizing their impact on the environment. We strive to offer lighter materials by reducing the basis weight while maintaining the level of performance. When compared to reusable linens, our single-use substrates are clinically superior.

5 Ahlstrom is a high performance fiber-based materials company, partnering with leading businesses around the world to help them stay ahead. Our products are used in a large variety of everyday applications, such as filters, medical gowns and drapes, diagnostics, wallcoverings, flooring and food packaging. We have a leading market position in the businesses in which we operate. Contact Ahlstrom sales EMEA medical@ahlstrom.com Learn more: DISCLAIMER: The information supplied in this document is for guidance only and should not be construed as a warranty. All implied warranties are expressly disclaimed, including without limitation any warranty of merchantability or fitness for use. All users of the material are responsible for ensuring that is suitable for their needs, environment and end use. All data is subject to change as Ahlstrom deems appropriate. Ahlstrom Corporation 2014