Nova C Series Manual

Transcription

1 Manual

2 Index Product description Add ons Recycling Assembly instructions Nova C Back Assembly instructions Nova C Back Double 4 seat Assembly instructions Nova C Back Double 5 seat Assembly instructions Nova C Bench Assembly instructions Nova C Back Armrest Assembly instructions Nova C Bench Armrest Assembly instructions Nova C Table Assembly instruction Nova C Charger Maintenance & Repair p3-5 p6 p7 p8-10 p11-13 p14-16 p17-18 p19 p20 p21 p22 p23-25

3 Product description Parts Nova C Back module Slender ribs Wide ribs Metal strip Metal legs Plastic Glides Nova C Bench module Slender ribs Wide ribs Metal strip Metal legs Plastic Glides 3

4 Product description Apperance Nova C Back can be made to any curvature between 0-45 degrees, both concave and convex. Standard modules are straight and convex /concave 45 degrees. The bench modules are snapped together and locked with a drawbolt catch. By opening the drawbolt catch the bench modules can be easily moved for annual cleaning or for reconfiguration. 4

5 Product description Apperance ribs The ribs and table tops are treated with hard wax oil which gives surface protection and color. Standard or custom colors can be chosen as well as color mixes. Special fire retardant treatment can be added. The ribs are made of beech or maple veneer with a surface veneer of oak or other wood of choice. The table tops are made of massive beech, oak or other wood of choice. Legs, strips armrests and table holders The metal parts of the bench modules are made of powder coated steel, of standard or your own choice of color, for a custom order. 5

6 Product description Add ons Nova C Back Armrest Nova C Back Armrest can be placed in any slender rib of Nova C Back, Nova C Wall, or Nova C Double. The default location is in the center of the bench module. Material: Powder coated steel. Nova C Table The Nova C Table can be placed in any slender rib of Nova C Back, Nova C Bench, Nova C Wall or Nova C Double. The default location is in the center of the bench. Material table top: Massive oak treated with hardwax oil. Material table holder: Powder coated steel. Nova C Charger Nova Charger can be placed on any leg of Nova C Bench, Nova C Back or Nova C Back Double. Choose between your prefered combination of outlets and/or USB. Material casing: Powder coated steel. Material outlet: ABS Nova C Bench Armrest Nova C Bench Armrest can be placed in any slender rib of the Nova C bench. The default location is in the center of the bench module. Material: Powder coated steel. 6

7 Recycling Ribs and table tops are made of wood and adhesive and are sorted as combustible. Legs, strips, armrest, table holder and small parts are made of steel and are sorted as metal. Glides are made of HDPE and are sorted as plastic. Charger casing is made of powdercoated steel and the outlet casing is made of ABS plastic. Chargers are sorted as electronic. 7

8 Nova C Back Nova C Back Leg x2 Nova C Back Slender rib x13 Nova C Back Wide rib x2 Note: If you have a curved bench you will have two metal strips in different lenght. Bolt A x16 Screw A x68 Nova C Glides x4 Nova C Back metal strip x2 Screw B x16 Note: Due to that the assembly of this bench mostly is done with the ribs upside down we recommend you to use a blanket or similar to prevent damage to the ribs and metal parts. Drawbolt Catch x2 8

9 Nova C Back 1 2a Use bolt A to attach glides to the leg. 2b Use screw A to attach metal strips to wide and slender ribs. Start with the two wide ribs, continue with the slender ribs. 2c Use screw A to attach metal strips to wide and slender ribs. Start with the two wide ribs, continue with the slender ribs. Use screw A to attach metal strips to wide and slender ribs. Start with the two wide ribs, continue with the slender ribs. 3 4 Use screw B to attach the legs to the rib construction. Use bolt A to attach drawbolt catch. Align hook with lock on each bench. The drawbolt catch should be aligned so that if the bench is turned 180, it should be able to be snapped together. 9

10 Nova C Back 5 Use the drawbolt catch to snap the benches together. 10

11 Nova C Back Double 4 seat Nova C Back Leg x4 Nova C Back Double Slender rib x26 Nova C Back Wide Double rib x4 Note: If you have a curved bench you will have four metal strips in different lenght. Nova C Glides x4 Nova C Double Glides x2 Nova C Back metal strip x4 Bolt A x32 Screw A x170 Dowel x17 Screw B x32 Clips x17 Drawbolt Catch x4 Note: Due to that the assembly of this bench mostly is done with the ribs upside down we recommend you to use a blanket or similar to prevent damage to the ribs and metal parts. 11

12 Nova C Back Double 4 seat 1 2 Use bolt A to attach glides to the leg. Use screw A to attach metal strips to wide and slender ribs. Start with the two wide ribs, continue with the slender ribs. 3 4 Use screw A to attach clips and attach plugs to one of the two rib constructions Use screw B to attach legs to the first rib construction. 5 6 Use screw B to attach legs to the second rib construction, in the same manner as in picture 4. Guide the ribs by means of the plugs. Use screw A and metal clip to attach the ribs back-to-back. 12

13 Nova C Back Double 4 seat 7 8 Use bolt A to attach drawbolt catch. Align hook with lock on each bench. The drawbolt catch should be aligned so that if the bench is turned 180, it should be able to be snapped together.. Use the drawbolt catch to snap the benches together. 13

14 Nova C Back Double 5 seat Nova C Back Leg x4 Nova C Back Double Slender rib x26 Nova C Back Slender rib x14 Nova C Back Wide Double rib x4 Nova C Glides x4 Nova C Double Glides x2 Bolt A x32 Screw A x226 Dowel x17 Nova C Back metal strip x4 Screw B x32 Clips x17 Note: Due to that the assembly of this bench mostly is done with the ribs upside down we recommend you to use a blanket or similar to prevent damage to the ribs and metal parts. Drawbolt Catch x4 14

15 Nova C Back Double 5 seat 1 2 Use bolt A to attach glides to the leg. Use screw A to attach the two smallest metal strips to wide and slender double ribs. Start with the two wide ribs, continue with the slender ribs. 3 4 Use screw A to attach clips and attach plugs to one of the two rib constructions. Use screw A to attach the two larger metal strips to wide and slender ribs. Start with the two wide ribs, continue with the slender ribs. The colored ribs are single ribs, the remaining are double ribs. 5 6 Use screw B to attach legs to the first rib construction. Use screw B to attach legs to the second rib construction, in the same manner as in picture 5. Guide the ribs by means of the plugs. 15

16 Nova C Back Double 5 seat 7 8 Use screw A and metal clip clip to to attach attach the the ribs ribs back-to-back. 9 Use bolt A to attach drawbolt catch. Align hook with lock on each bench. The drawbolt catch should be aligned so that if the bench is turned 180, it should be able to be snapped together. Use the drawbolt catch to snap the benches together. 16

17 Nova C Bench Nova C BenchLeg x2 Nova C Bench slander rib x13 Nova C Bench Wide rib x2 Note: If you have a curved bench you will have four metal strips in different lenght. Bolt A x16 Screw A x68 Nova C Glides x4 Nova C Bench metal strip x2 Screw B x16 Drawbolt Catch x2 Note: Due to that the assembly of this bench mostly is done with the ribs upside down we recommend you to use a blanket or similar to prevent damage to the ribs and metal parts. 17

18 Assembly instructions Nova C Bench 1 2 Use screw A to attach metal strips to wide and slender ribs. Start with the two wide ribs, continue with the slender ribs. Use bolt A to attach glides to the leg. 3 4 Use screw A to attach metal strips to wide and slender ribs. Start with the two wide ribs, continue with the slender ribs. Use screw B to attach the legs to the rib construction 5 6 Use bolt A to attach drawbolt catch. Align hook with lock on each bench. The drawbolt catch should be aligned so that if the bench is turned 180, it should be able to be snapped together. Use the drawbolt catch to snap the benches together. 18

19 Nova C Back Armrest Bolt B x4 Nova C Back Armrest x1 Metal plate x2 Screw-nut A x4 1 2 Use slender rib with pre-drilled holes. Assemble armrest with Bolt B, metal plate and Screw-nut A 19

20 Nova C Bench Armrest Bolt B x4 Nova C Bench Armrest x1 Metal plate x2 Screw-nut A x4 1 2 Use slender rib with pre-drilled holes. Assemble armrest with Bolt B, metal plate and Screw-nut A 20

21 Nova C Table Bolt B x5 Washer A x1 Nova C Table x1 Metal plate x1 Screw-nut A x5 1a 1b Use slender rib with pre-drilled holes. Use slender rib with pre-drilled holes. 2 Metal plate Assemble table with Bolt B, Screw-nut A, Metal plate and Washer A 21

22 Nova C Charger Nova C Charger x1 1 2 Slide the charger onto the metal leg. Tighten the screws on the back of the charger. 22

23 Maintenance/Repair Background The wooden ribs are treated with hardwax Rubio Monocoat Oil Plus 2C, a maintenance series that is environmentally sound. We recommend that you use the Rubio Monocoats (Rubio) products for oiling to cleaning and maintenance, as these products are environmentally friendly and designed to be compatible at each stage. Weekly cleaning First cleaning can be done within six days after the original treatment. 1 Brush ribs from dirt and dust. 2 Immerse a cotton cloth or microfiber towel in a solution of Rubio Monocoat Soap. (Mixing ratio: 150ml RMC Soap per 10 liters of water. Wring out to semi-wet cloth) 3 Wipe 2-4 square meters of ribs. 4 Rinse the cloth in the bucket with clean water and wring out thoroughly. Cleaning with RMC Soap helps to preserve the surface protection and helps to keep the matte surface 23

24 Maintenance/Repair Touch up / Maintenance Scratches can be touched up by local treatment with Rubio Monocoat Oil Plus 2C, with color according to the original treatment, giving no joints, making the damage less visible and gives the injured surface back it s surface protection. Maintenance cycle depends on rate of use/wear. 1: Dark Oak rib 2: Scratched Dark Oak rib 3: Clean area with sandpaper or cloth 4: Mix the two components, ratio : Spread out a small quantity ofthe mix with a cloth. 6: Let the oil absorb during a few minutes. Note The product may NOT be diluted! Cloths, saturated with oil, may spontaneously combust. After usage, they need to be soaked in water before disposal. 7: Remove all excess oil with a dry cloth. 8: Treated Dark Oak rib. Let dry for at least 12h. 24

25 Maintenance/Repair Tightening the screws Depending on humidity, screws and bolts may need to be tightened 3-6 months after delivery, otherwise the construction may become loose (applies to all wooden structures). Check the screws and bolts once a year. If armrests or tables have been kicked or used in a wrongful way the bolts and screws should be tightened so that they never get a chance to start to loosen. Replace rib If for any reason you need to change any of your ribs, it's easy to do. 1 2 Unscrew the four screws that belongs to the damaged rib. Remove the damaged rib. 3 4 Add the new rib. Screw the new rib in place. 25

26 greenfc.com