OxyVinyls 155. OxyVinyls, LP Occidental Tower 5005 LBJ Freeway Dallas, Texas General Description. Features and Uses:
|
|
|
- Andra Elliott
- 7 years ago
- Views:
Transcription
1 OxyVinyls 155 Alloys and Polyblends High Flow Injection Molding Compounds Color Concentrates and Masterbatches Flow Enhancement Flexible and Rigid Foams Typical Specification Inherent Viscosity (dl/g) OxyVinyls 1386 Relative Viscosity Correlation K Correlation Volatiles (%) Max. OxyVinyls 1242 % Retained on 40 mesh Max. OxyVinyls 1505 % Retained on 60 mesh Max. OxyVinyls 1502 % Retained on 200 mesh Max. % Retained on Pan Max. Contamination (#/100gm) 8 30 Max. OxyVinyls 1504 Residual Monomer (ppm) Max. OxyVinyls 1005 Porosity (cc/g) OxyVinyls 1094 Apparent Bulk Density (g/cc) OxyVinyls 1501 Flow Time (s) Max. OxyVinyls 1501 Niagara Falls Plant express or implied, is made regarding performance, stability or otherwise. This information is not intended to be all-inclusive as the manner and conditions of use, handling, storage and other factors may involve other or additional safety or performance considerations. While our technical personnel will be happy to respond to questions regarding safe handling and use procedures, safe handling and use remains the responsibility of the customer. No suggestions for use are intended as, and nothing herein shall be construed as a recommendation to infringe any existing patents or to violate any Federal, State, or local laws.
2 OxyVinyls 155F Alloys and Polyblends High Flow Injection Molding Compounds Color Concentrates and Masterbatches Flow Enhancement Flexible and Rigid Foams Inherent Viscosity (dl/g) OxyVinyls 1386 Relative Viscosity Correlation K Correlation Volatiles (%) Max. OxyVinyls 1242 % Retained on 40 mesh Max. OxyVinyls 1505 % Retained on 60 mesh Max. OxyVinyls 1502 % Retained on 200 mesh Max. % Retained on Pan Max. Contamination (#/100gm) 3 10 Max. OxyVinyls 1504 Residual Monomer (ppm) Max. OxyVinyls 1005 Porosity (cc/g) OxyVinyls 1094 Apparent Bulk Density (g/cc) OxyVinyls 1501 Flow Time (s) Max. OxyVinyls 1501 Niagara Falls Plant
3 OxyVinyls 185 Injection molding, Pipe fittings Calendering Flooring Extrusion, clear film and sheet Rigid foam profiles Inherent Viscosity (dl/g) OxyVinyls 1386 Relative Viscosity Correlation K Correlation Volatiles (%) Max. OxyVinyls 1242 % Retained on 40 mesh Max. OxyVinyls 1505 % Retained on 60 mesh Max. OxyVinyls 1502 % Retained on 200 mesh Max. % Retained on Pan Max. Contamination (#/100gm) 4 30 Max. OxyVinyls 1504 Residual Monomer (ppm) Max. OxyVinyls 1005 Apparent Bulk Density (g/cc) OxyVinyls 1501 Flow Time (s) 8 14 Max. OxyVinyls 1501 ASTM Cell Classification GP ASTM D 1755 Pasadena Plant express or implied, is made regarding performance, stability or otherwise. This information is not intended to be all-inclusive as the manner and conditions of use, handling, storage and other factors may involve other or additional safety or performance considerations. While our technical personnel will be happy to respond to questions regarding safe handling and use procedures, safe handling and use remains the responsibility of the customer. No suggestions for use are intended as, and nothing herein shall be construed as a recommendation to infringe any existing patents or to violate any Federal, State, or local laws.
4 OxyVinyls 185F Injection molding, Pipe fittings Calendering Flooring Solution top coats Extrusion, clear film and sheet Rigid foam profiles Alloying Low Gels and Contamination Inherent Viscosity (dl/g) OxyVinyls 1386 Relative Viscosity Correlation K Correlation Volatiles (%) Max. OxyVinyls 1242 % Retained on 40 mesh Max. OxyVinyls 1505 % Retained on 60 mesh Max. OxyVinyls 1502 % Retained on 200 mesh Max. % Retained on Pan Max. Contamination (#/100gm) 2 10 Max. OxyVinyls 1504 Residual Monomer (ppm) Max. OxyVinyls 1005 Apparent Bulk Density (g/cc) OxyVinyls 1501 Flow Time (s) 8 14 Max. OxyVinyls 1501 Gels (BEST Test) 3 10 Max. OxyVinyls 1249 ASTM Cell Classification GP ASTM D 1755 Pasadena Plant express or implied, is made regarding performance, stability or otherwise. This information is not intended to be all-inclusive as the manner and conditions of use, handling, storage and other factors may involve other or additional safety or performance considerations. While our technical personnel will be happy to respond to questions regarding safe handling and use procedures, safe handling and use remains the responsibility of the customer. No suggestions for use are intended as, and nothing herein shall be construed as a recommendation to infringe any existing patents or to violate any Federal, State, or local laws.
5 OxyVinyls 190F Extrusions, foams, clear film and sheet Injection molding, Pipe fittings Solution top coats Calendering Alloying Flooring Inherent Viscosity (dl/g) OxyVinyls 1386 Relative Viscosity Correlation K Correlation Volatiles (%) Max. OxyVinyls 1242 % Retained on 40 mesh Max. OxyVinyls 1505 % Retained on 60 mesh Max. OxyVinyls 1502 % Retained on 200 mesh Max. % Retained on Pan Max. Contamination (#/100gm) 2 15 Max. OxyVinyls 1504 Residual Monomer (ppm) Max. OxyVinyls 1005 Apparent Bulk Density (g/cc) OxyVinyls 1501 Flow Time (s) 8 14 Max. OxyVinyls 1501 Gels (BEST Test) 3 10 Max. OxyVinyls 1249 Color (CIE Lab b* ) OxyVinyls 1500 Pasadena Plant express or implied, is made regarding performance, stability or otherwise. This information is not intended to be all-inclusive as the manner and conditions of use, handling, storage and other factors may involve other or additional safety or performance considerations. While our technical personnel will be happy to respond to questions regarding safe handling and use procedures, safe handling and use remains the responsibility of the customer. No suggestions for use are intended as, and nothing herein shall be construed as a recommendation to infringe any existing patents or to violate any Federal, State, or local laws.
6 OxyVinyls 195F Extrusions, foams, clear film and sheet Injection molding, Pipe fittings Solution top coats Calendering Alloying Flooring Inherent Viscosity (dl/g) OxyVinyls 1386 Relative Viscosity Correlation K Correlation Volatiles (%) Max. OxyVinyls 1242 % Retained on 40 mesh Max. OxyVinyls 1505 % Retained on 60 mesh 1 3 Max. OxyVinyls 1502 % Retained on 200 mesh Max. % Retained on Pan 2 3 Max. Contamination (#/100gm) 2 15 Max. OxyVinyls 1504 Residual Monomer (ppm) Max. OxyVinyls 1005 Apparent Bulk Density (g/cc) OxyVinyls 1501 Flow Time (s) 8 14 Max. OxyVinyls 1501 Gels (BEST Test) 3 10 Max. OxyVinyls 1249 Color (CIE Lab b* ) OxyVinyls 1500 Pasadena Plant July 2013 express or implied, is made regarding performance, stability or otherwise. This information is not intended to be all-inclusive as the manner and conditions of use, handling, storage and other factors may involve other or additional safety or performance considerations. While our technical personnel will be happy to respond to questions regarding safe handling and use procedures, safe handling and use remains the responsibility of the customer. No suggestions for use are intended as, and nothing herein shall be construed as a recommendation to infringe any existing patents or to violate any Federal, State, or local laws.
7 OxyVinyls 200F Rigid and Flexible Profile Extrusion Medical and Food Grade Film and Sheet Medical and Food Grade Tubing and Molded Devices Wire and Cable Insulation Low Gels and Contamination Uniform Plasticizer Absorption Extruded and Molded Foams Calendered Goods Inherent Viscosity (dl/g) OxyVinyls 1386 Relative Viscosity Correlation K Correlation Volatiles (%) Max. OxyVinyls 1242 % Retained on 40 mesh Max. OxyVinyls 1505 % Retained on 60 mesh Max. OxyVinyls 1502 % Retained on 200 mesh Max. % Retained on Pan Max. Contamination (#/100gm) 4 12 Max. OxyVinyls 1504 Residual Monomer (ppm) Max. OxyVinyls 1005 Apparent Bulk Density (g/cc) OxyVinyls 1501 Flow Time (s) 8 12 Max. OxyVinyls 1501 Porosity (cc/g) OxyVinyls 1094 Gels (4 mill results) 3 10 Max. OxyVinyls 1503 Color (CIE Lab b* value) OxyVinyls 1500 Deer Park Plant express or implied, is made regarding performance, stability or otherwise. This information is not intended to be all-inclusive as the manner and conditions of use, handling, storage and other factors may involve other or additional safety or performance considerations. While our technical personnel will be happy to respond to questions regarding safe handling and use procedures, safe handling and use remains the responsibility of the customer. No suggestions for use are intended as, and nothing herein shall be construed as a recommendation to infringe any existing patents or to violate any Federal, State, or local laws.
8 OxyVinyls 216 OxyVinyls 216 is an anti-stat treated resin designed for rigid applications. Its medium molecular weight provides excellent processing characteristics in both single and multi-screw extruders. Its superior color and low contamination qualities make it perfect for vinyl siding and other weatherable building applications. Inherent Viscosity (dl/g) OxyVinyls 1386 Relative Viscosity Correlation K Correlation Volatiles (%) Max. OxyVinyls 1242 % Retained on 40 mesh Max. OxyVinyls 1505 % Retained on 60 mesh Max. OxyVinyls 1502 % Retained on 200 mesh Max. % Retained on Pan Max. Residual Monomer (ppm) Max. OxyVinyls 1005 Apparent Bulk Density (g/cc) OxyVinyls 1501 ASTM Cell Classification GP ASTM D 1755 Pasadena Plant express or implied, is made regarding performance, stability or otherwise. This information is not intended to be all-inclusive as the manner and conditions of use, handling, storage and other factors may involve other or additional safety or performance considerations. While our technical personnel will be happy to respond to questions regarding safe handling and use procedures, safe handling and use remains the responsibility of the customer. No suggestions for use are intended as, and nothing herein shall be construed as a recommendation to infringe any existing patents or to violate any Federal, State, or local laws.
9 OxyVinyls 216S OxyVinyls 216S is suspension PVC resin designed for rigid applications. Its medium molecular weight provides excellent processing characteristics in both single and multi-screw extruders. Its superior color and low contamination qualities make it perfect for vinyl siding and other weatherable building applications. Vinyl Siding and Soffit Windows and Doors Outdoor Furniture Rigid Profiles Gutters and Down-spouts Window Blinds Inherent Viscosity (dl/g) OxyVinyls 1386 Relative Viscosity Correlation K Correlation Volatiles (%) Max. OxyVinyls 1242 % Retained on 40 mesh Max. OxyVinyls 1505 % Retained on 60 mesh Max. OxyVinyls 1502 % Retained on 200 mesh Max. % Retained on Pan Max. Residual Monomer (ppm) Max. OxyVinyls 1005 Apparent Bulk Density (g/cc) OxyVinyls 1501 ASTM Cell Classification GP ASTM D 1755 Pasadena Plant express or implied, is made regarding performance, stability or otherwise. This information is not intended to be all-inclusive as the manner and conditions of use, handling, storage and other factors may involve other or additional safety or performance considerations. While our technical personnel will be happy to respond to questions regarding safe handling and use procedures, safe handling and use remains the responsibility of the customer. No suggestions for use are intended as, and nothing herein shall be construed as a recommendation to infringe any existing patents or to violate any Federal, State, or local laws.
10 OxyVinyls 220F Medical and Food Grade Flexible Film and Sheet Medical and Food Grade Tubing and Molded Devices Wire and Cable Insulation Low Gels and Contamination Uniform Plasticizer Absorption Calendered Goods Inherent Viscosity (dl/g) OxyVinyls 1386 Relative Viscosity Correlation K Correlation Volatiles (%) Max. OxyVinyls 1242 % Retained on 40 mesh Max. OxyVinyls 1505 % Retained on 60 mesh Max. OxyVinyls 1502 % Retained on 200 mesh Max. % Retained on Pan Max. Contamination (#/100gm) 4 12 Max. OxyVinyls 1504 Residual Monomer (ppm) Max. OxyVinyls 1005 Powder Mix Time (s) OxyVinyls 488 Gels (3 QLC) 5 50 Max. OxyVinyls 1503 Pedricktown Plant
11 OxyVinyls 225 OxyVinyls 225 is a suspension resin designed for rigid applications. It is often converted into a wide range of pipe sizes and types, which meet the most stringent standards for water supply and distribution. Its medium molecular weight provides excellent processing characteristics in both single and multi-screw extruders. Typical Applications include irrigation, foam core, potable water, DWV/sewer pipe, electrical conduit and rigid profiles. Typical Specification Inherent Viscosity (dl/g) OxyVinyls 1386 Relative Viscosity Correlation K Correlation Volatiles (%) Max. OxyVinyls 1242 % Retained on 40 mesh Max. OxyVinyls 1505 % Retained on 60 mesh Max. OxyVinyls 1502 % Retained on 200 mesh Max. % Retained on Pan Max. Residual Monomer (ppm) Max. OxyVinyls 1005 Apparent Bulk Density (g/cc) OxyVinyls 1501 ASTM Cell Classification GP ASTM D 1755 Pasadena Plant express or implied, is made regarding performance, stability or otherwise. This information is not intended to be all-inclusive as the manner and conditions of use, handling, storage and other factors may involve other or additional safety or performance considerations. While our technical personnel will be happy to respond to questions regarding safe handling and use procedures, safe handling and use remains the responsibility of the customer. No suggestions for use are intended as, and nothing herein shall be construed as a recommendation to infringe any existing patents or to violate any Federal, State, or local laws.
12 OxyVinyls 225P OxyVinyls 225P resin is often converted into a wide range of pipe sizes and types, which meet the most stringent standards for water supply and distribution. Its medium molecular weight provides excellent processing characteristics in both single and multi-screw extruders. Typical Applications include irrigation, foam core, potable water, DWV/sewer pipe, electrical conduit and rigid profiles. Inherent Viscosity (dl/g) OxyVinyls 1386 Relative Viscosity Correlation K Correlation Volatiles (%) Max. OxyVinyls 1242 % Retained on 40 mesh Max. OxyVinyls 1505 % Retained on 60 mesh Max. OxyVinyls 1502 % Retained on 200 mesh Max. % Retained on Pan Max. Residual Monomer (ppm) Max. OxyVinyls 1005 Apparent Bulk Density (g/cc) OxyVinyls 1501 ASTM Cell Classification GP ASTM D 1755 Pasadena Plant express or implied, is made regarding performance, stability or otherwise. This information is not intended to be all-inclusive as the manner and conditions of use, handling, storage and other factors may involve other or additional safety or performance considerations. While our technical personnel will be happy to respond to questions regarding safe handling and use procedures, safe handling and use remains the responsibility of the customer. No suggestions for use are intended as, and nothing herein shall be construed as a recommendation to infringe any existing patents or to violate any Federal, State, or local laws.
13 OxyVinyls 226 Flexible Film and Sheet Molding and Profile Extrusion Applications Wire and Cable Insulation Low Gels and Contamination Uniform Plasticizer Absorption Excellent Color and Clarity Typical Specification Inherent Viscosity (dl/g) OxyVinyls 1386 Relative Viscosity Correlation K Correlation Volatiles (%) Max. OxyVinyls 1242 % Retained on 40 mesh Max. OxyVinyls 1505 % Retained on 60 mesh Max. OxyVinyls 1502 % Retained on 200 mesh Max. % Retained on Pan Max. Contamination (#/100gm) 9 15 Max. OxyVinyls 1504 Residual Monomer (ppm) Max. OxyVinyls 1005 Porosity (cc/g) OxyVinyls 1094 Apparent Bulk Density (g/cc) OxyVinyls 1501 Flow Time (s) 9 12 Max. OxyVinyls 1501 Powder Mix Time (s) OxyVinyls 488 Color (CIELab b*-value) OxyVinyls 1500 Gels (4 mill results) Max. OxyVinyls 1503 Pasadena Plant July 2012
14 OxyVinyls 226F Flexible Film and Sheet Molding and Profile Extrusion Applications Wire and Cable Insulation Low Gels and Contamination Uniform Plasticizer Absorption Excellent Color and Clarity Typical Specification Inherent Viscosity (dl/g) OxyVinyls 1386 Relative Viscosity Correlation K Correlation Volatiles (%) Max. OxyVinyls 1242 % Retained on 40 mesh Max. OxyVinyls 1505 % Retained on 60 mesh Max. OxyVinyls 1502 % Retained on 200 mesh Max. % Retained on Pan Max. Contamination (#/100gm) 5 12 Max. OxyVinyls 1504 Residual Monomer (ppm) Max. OxyVinyls 1005 Porosity (cc/g) OxyVinyls 1094 Apparent Bulk Density (g/cc) OxyVinyls 1501 Flow Time (s) 8 12 Max. OxyVinyls 1501 Powder Mix Time (s) OxyVinyls 488 Color (CIELab b*-value) OxyVinyls 1500 Gels (4 mill results) 4 10 Max. OxyVinyls 1503 Pasadena Plant July 2012
15 OxyVinyls 240 Medical and Food Grade Flexible Film and Sheet Medical and Food Grade Tubing and Molded Devices Wire and Cable Insulation Rigid Extrusion Compounds Low Gels and Contamination Uniform Plasticizer Absorption Calendered Goods Typical Specification Inherent Viscosity (dl/g) OxyVinyls 1386 Relative Viscosity Correlation K Correlation Volatiles (%) Max. OxyVinyls 1242 % Retained on 40 mesh Max. OxyVinyls 1505 % Retained on 60 mesh Max. OxyVinyls 1502 % Retained on 200 mesh Max. % Retained on Pan Max. Contamination (#/100gm) 9 15 Max. OxyVinyls 1504 Residual Monomer (ppm) Max. OxyVinyls 1005 Porosity (cc/g) OxyVinyls 1094 Apparent Bulk Density (g/cc) OxyVinyls 1501 Flow Time (s) 8 12 Max. OxyVinyls 1501 Powder Mix Time (s) OxyVinyls 488 Color (CIELab b*-value) Max. OxyVinyls 1500 Gels (4 mill results) Max. OxyVinyls 1503 Deer Park Plant
16 OxyVinyls 240F Medical and Food Grade Flexible Film and Sheet Medical and Food Grade Tubing and Molded Devices Wire and Cable Insulation Rigid Extrusion Compounds Low Gels and Contamination Uniform Plasticizer Absorption Calendered Goods Typical Specification Inherent Viscosity (dl/g) OxyVinyls 1386 Relative Viscosity Correlation K Correlation Volatiles (%) Max. OxyVinyls 1242 % Retained on 40 mesh Max. OxyVinyls 1505 % Retained on 60 mesh Max. OxyVinyls 1502 % Retained on 200 mesh Max. % Retained on Pan Max. Contamination (#/100gm) 2 12 Max. OxyVinyls 1504 Residual Monomer (ppm) Max. OxyVinyls 1005 Porosity (cc/g) OxyVinyls 1094 Apparent Bulk Density (g/cc) OxyVinyls 1501 Flow Time (s) 8 12 Max. OxyVinyls 1501 Powder Mix Time (s) OxyVinyls 488 Color (CIELab b*-value) OxyVinyls 1500 Gels (4 mill results) 4 10 Max. OxyVinyls 1503 Deer Park Plant
17 OxyVinyls 255 Medical and Food Grade Flexible Film and Sheet Medical and Food Grade Tubing and Molded Devices Automotive Molding and Profile Applications Low Gels and Contamination Uniform Plasticizer Absorption Wire and Cable Insulation Inherent Viscosity (dl/g) OxyVinyls 1386 Relative Viscosity Correlation K Correlation Volatiles (%) Max. OxyVinyls 1242 % Retained on 40 mesh Max. OxyVinyls 1505 % Retained on 60 mesh Max. OxyVinyls 1502 % Retained on 200 mesh Max. % Retained on Pan Max. Contamination (#/100gm) 4 15 Max. OxyVinyls 1504 Residual Monomer (ppm) Max. OxyVinyls 1005 Powder Mix Time (s) OxyVinyls 488 Gels (6 mill results) Max. OxyVinyls 1503 Apparent Bulk Density (g/cc) OxyVinyls 1501 Flow Time (s) 8 12 Max. OxyVinyls 1501 Color (CIELab b* -value) OxyVinyls 1500 Pedricktown Plant
18 OxyVinyls 255F Medical and Food Grade Flexible Film and Sheet Medical and Food Grade Tubing and Molded Devices Automotive Molding and Profile Applications Low Gels and Contamination Uniform Plasticizer Absorption Wire and Cable Insulation Inherent Viscosity (dl/g) OxyVinyls 1386 Relative Viscosity Correlation K Correlation Volatiles (%) Max. OxyVinyls 1242 % Retained on 40 mesh Max. OxyVinyls 1505 % Retained on 60 mesh Max. OxyVinyls 1502 % Retained on 200 mesh Max. % Retained on Pan Max. Contamination (#/100gm) 3 15 Max. OxyVinyls 1504 Residual Monomer (ppm) Max. OxyVinyls 1005 Powder Mix Time (s) OxyVinyls 488 Gels (6 mill results) 8 12 Max. OxyVinyls 1503 Apparent Bulk Density (g/cc) OxyVinyls 1501 Flow Time (s) 8 12 Max. OxyVinyls 1501 Color (CIELab b* -value) OxyVinyls 1500 Pedricktown Plant
19 OxyVinyls 280 High Molecular Weight Excellent Plasticizer Absorption and Dryup Useful for Calendered and Extruded Materials requiring High Strength, Abrasion Resistance, Fatigue Resistance, Grain Retention, Impact, Cut-through, and Other Physical Properties Inherent Viscosity (dl/g) OxyVinyls 1386 Relative Viscosity Correlation K Correlation Volatiles (%) Max. OxyVinyls 1242 % Retained on 40 mesh Max. OxyVinyls 1505 % Retained on 60 mesh Max. OxyVinyls 1502 % Retained on 200 mesh Max. % Retained on Pan Max. Contamination (#/100gm) 4 15 Max. OxyVinyls 1504 Residual Monomer (ppm) Max. OxyVinyls 1005 Porosity (cc/g) OxyVinyls 1094 Apparent Bulk Density (g/cc) OxyVinyls 1501 Flow Time (s) 8 20 Max. OxyVinyls 1501 Pedricktown Plant
20 OxyVinyls 310 High Molecular Weight Excellent Plasticizer Absorption and Dryup Useful for Calendered and Extruded Materials requiring High Strength, Abrasion Resistance, Fatigue Resistance, Grain Retention, Impact, Cut-through, and Other Physical Properties Inherent Viscosity (dl/g) OxyVinyls 1386 Relative Viscosity Correlation K Correlation Volatiles (%) Max. OxyVinyls 1242 % Retained on 40 mesh Max. OxyVinyls 1505 % Retained on 60 mesh Max. OxyVinyls 1502 % Retained on 200 mesh Max. % Retained on Pan Max. Contamination (#/100gm) 3 15 Max. OxyVinyls 1504 Residual Monomer (ppm) Max. OxyVinyls 1005 Porosity (cc/g) OxyVinyls 1094 Apparent Bulk Density (g/cc) OxyVinyls 1501 Pedricktown Plant
21 OxyVinyls 355 High Molecular Weight Excellent Plasticizer Absorption and Dryup Useful for Calendered and Extruded Materials requiring High Strength, Abrasion Resistance, Fatigue Resistance, Grain Retention, Impact, Cut-through, and Other Physical Properties Inherent Viscosity (dl/g) OxyVinyls 1386 Relative Viscosity Correlation K Correlation Volatiles (%) Max. OxyVinyls 1242 % Retained on 40 mesh Max. OxyVinyls 1505 % Retained on 60 mesh Max. OxyVinyls 1502 % Retained on 200 mesh Max. % Retained on Pan Max. Contamination (#/100gm) 3 15 Max. OxyVinyls 1504 Residual Monomer (ppm) Max. OxyVinyls 1005 Porosity (cc/g) OxyVinyls 1094 Apparent Bulk Density (g/cc) OxyVinyls 1501 Pedricktown Plant
22 OxyVinyls 450F Medical and Food Grade Flexible Film and Sheet Medical and Food Grade Tubing and Molded Devices Wire and Cable Insulation Automotive Molding and Profile Applications Low Gels and Contamination Uniform Plasticizer Absorption Drug Master File Listing Typical Specification Inherent Viscosity (dl/g) OxyVinyls 1386 Relative Viscosity Correlation K Correlation Volatiles (%) Max. OxyVinyls 1242 % Retained on 40 mesh Max. OxyVinyls 1505 % Retained on 60 mesh Max. OxyVinyls 1502 % Retained on 200 mesh Max. % Retained on Pan Max. Contamination (#/100gm) 4 12 Max. OxyVinyls 1504 Residual Monomer (ppm) Max. OxyVinyls 1005 Porosity (cc/g) OxyVinyls 1094 Apparent Bulk Density (g/cc) OxyVinyls 1501 Flow Time (s) 8 12 Max. OxyVinyls 1501 Powder Mix Time (s) OxyVinyls 488 Color (CIELab b*-value) OxyVinyls 1500 Gels (4 mill results) 4 10 Max. OxyVinyls 1503 Deer Park Plant
23 OxyVinyls 500F Medical and Food Grade Flexible Film and Sheet Medical and Food Grade Tubing and Molded Devices Wire and Cable Insulation Low Gels and Contamination Uniform Plasticizer Absorption Excellent Color and Clarity Typical Specification Inherent Viscosity (dl/g) OxyVinyls 1386 Relative Viscosity Correlation K Correlation Volatiles (%) Max. OxyVinyls 1242 % Retained on 40 mesh Max. OxyVinyls 1505 % Retained on 60 mesh Max. OxyVinyls 1502 % Retained on 200 mesh Max. % Retained on Pan Max. Contamination (#/100gm) 3 16 Max. OxyVinyls 1504 Residual Monomer (ppm) Max. OxyVinyls 1005 Porosity (cc/g) OxyVinyls 1094 Apparent Bulk Density (g/cc) OxyVinyls 1501 Flow Time (s) 8 12 Max. OxyVinyls 1501 Powder Mix Time (s) OxyVinyls 488 Gels (4 mill results) 4 10 Max. OxyVinyls 1503 Deer Park Plant
Mixing Rigid PVC. Oxy Vinyls, LP Occidental Tower 5005 LBJ Freeway Dallas, Texas 75244 877/699-8465. Technical Report #8
Mixing Rigid PVC Technical Report #8 With the use of the proper equipment and procedures, rigid PVC can be mixed to accommodate a variety of application needs. In most instances, PVC powder compound is
Raven and Conductex Products for Specialty Applications
Raven and Conductex Products for Specialty Applications e e FUNDAMENTAL PROPERTIES OF CARBON BLACK A carbon black s application performance is determined by its fundamental properties and the level of
The Use of Metals in Vinyl Products. Allen Blakey Sr. Director, Public Affairs The Vinyl Institute, USA CPSC Roundtable on Lead May 13, 2008
The Use of Metals in Vinyl Products Allen Blakey Sr. Director, Public Affairs The Vinyl Institute, USA CPSC Roundtable on Lead May 13, 2008 About the Vinyl Institute National trade association for the
Wire and Cable Product Guide
Wire and Cable Product Guide Applications Elvax resins with low vinyl acetate content, typically 9 to 15%, are well suited for compounding into primary insulation of UL listed, type XHHW building wire,
polymer additive General Overview
DuPont Fluoroguard polymer additive General Overview DuPont Fluoroguard is a range of colorless, odorless, and chemically inert polymer additives based on fluorinated synthetic oil. Fluoroguard is designed
Baerlocher Additives for PVC. Cables and Wires. we add character to plastics
Baerlocher Additives for PVC Cables and Wires we add character to plastics we add character to plastics Plastics open new avenues for the future. Additives essentially determine properties and quality
The development of new PVC resins for low emission applications. Chris Howick Ineos Vinyls
The development of new PVC resins for low emission applications Chris Howick Ineos Vinyls Outline Background to PVC» Suspension PVC Emulsion PVC PVC for interior applications Indoor Air Quality and Interior
Foam Injection Molding:
Foam Injection Molding: Unique Process Solutions for Light Weighting Automotive Plastic Parts Steve Braig President & CEO Trexel, Inc. AGENDA Technology Overview > Chemical Foaming > Physical Foaming Foamed
RAVEN BLACKS SPECIALTY APPLICATIONS REQUIRE POWERFUL SOLUTIONS
RAVEN BLACKS SPECIALTY APPLICATIONS REQUIRE POWERFUL SOLUTIONS RAVEN BLACKS RAVEN BLACKS A carbon black's application performance is determined by its nature and the level of dispersion achieved. The most
DOW ECOLIBRIUM Bio-Based Plasticizers - Greening of PVC with Renewably Sourced Plasticizers
DOW ECOLIBRIUM Bio-Based Plasticizers - Greening of PVC with Renewably Sourced Plasticizers Bharat I. Chaudhary R. Eaton, B. Sczekalla, C. Laufer, B. Neese, A. Ghosh-Dastidar The Dow Chemical Company Outline
Physical Dry Conditioned Unit Test method
Technical Data Sheet Ixef 1022 Ixef 1022 is a 50% glass-fiber reinforced, general purpose compound that exhibits very high strength and rigidity, outstanding surface gloss, and excellent creep resistance.
EVA Modification, Wire Coating
TAFMER TM DF & M Ethylene based α-olefin copolymers TAFMER DF & M is used as a modifier of Ethylene Vinyl Acetate (EVA), Polyethylene (PE) and other thermoplastics to improve its properties. It is suitable
PVC in automotive. Examining the trends and drivers behind the growth of PVC for dashboard applications
PVC in automotive Examining the trends and drivers behind the growth of PVC for dashboard applications Summary Introduction The evolution of PVC-slush: past & present How PVC meets the increasingly stringent
Standard Specification for Polyvinyl Chloride (PVC) and Other Organic Polymer-Coated Steel Chain-Link Fence Fabric 1
Designation: F 668 07 Standard Specification for Polyvinyl Chloride (PVC) and Other Organic Polymer-Coated Steel Chain-Link Fence Fabric 1 This standard is issued under the fixed designation F 668; the
Keltan 6251A A Versatile Sponge Grade
Keltan 6251A A Versatile Sponge Grade Graham Choonoo, Michiel Dees and Philip Hough Lanxess Elastomers Presented at the RubberCon 2012 Meeting of the Norwegian Institute of Rubber Technology Oslo, Norway
KALPANA INDUSTRIES LTD. TECHNICAL DATA SHEET
1 KALPANA INDUSTRIES LTD. TECHNICAL DATA SHEET KI XL - 03 / KI-SC 10 TWO COMPONENT AMBIENT CURABLE POLYETHYLENE COMPOUND FOR INSULATION OF LOW VOLTAGE POWER CABLE DESCRIPTION : KI polyethylene compound
SD-0150 GENERAL PURPOSE ABS (Acrylonitrile Butadiene Styrene) (TA)
1) Product Description: SD-0150 GENERAL PURPOSE ABS (Acrylonitrile Butadiene Styrene) (TA) General Purpose ABS, SD 0150 grade, is a rigid thermoplastic with good processing characteristics. It is a high
Aviation. ACRYLITE Acrylic Sheet Products for Aircraft Transparencies
Aviation ACRYLITE Acrylic Sheet Products for Aircraft Transparencies Evonik CYRO LLC, an Evonik Degussa Corporation group company, is a leading manufacturer of acrylic sheet & molding compounds, and bulk
PTFE Teflon Glass Fabric Grades & Material Data Sheets
PTFE Teflon Glass Fabric Grades & Material Data Sheets Taconic TAC-TAPES Taconic TAC-TAPES are constructed with high-quality adhesives and backing materials to deliver superior performance. A choice of
General Guidelines for Butt, Saddle, and Socket Fusion of Unlike Polyethylene Pipes and Fittings TN-13/2007
General Guidelines for Butt, Saddle, and Socket Fusion of Unlike Polyethylene Pipes and Fittings TN-13/2007 105 Decker Court, Suite 825, Irving, TX 75062 P: 469-499-1044 F: 469-499-1063 www.plasticpipe.org
Innovative Polymer Solutions for Wire & Cable
Innovative Polymer Solutions for Wire & Cable A Bit More Amazing Engineered Polymers Industrial Engineered Polymers is more than a leading engineered polymer solutions supplier and manufacturer; it s a
MICRO PLASTICS MOLDED NYLON 6/6 FASTENERS MECHANICAL TEST DATA - UNC - UNF SECTION
MICRO PLASTICS MOLDED NYLON 6/6 FASTENERS MECHANICAL TEST DATA - UNC - UNF Nylon 6/6 meets MIL-M20693B "A" Type 1, LP410A, and ASTM D789-66 Type 1, GDE 2 All test performed per ASTM specifications. Parts
3M Ionic Liquid Antistat FC-4400
Technical Data September 14 3M Ionic Liquid Antistat FC-40 Introduction 3M Ionic Liquid Antistat FC-40 is a high purity antistatic additive compatible with a variety of high performance polymer systems,
Windows, Doors and Skylights. Customer Confidence Through Certifying Vinyl Profiles
Exterior Vinyl Profiles of Windows, Doors and Skylights Customer Confidence Through Certifying Vinyl Profiles This program is registered with the AIA/CES for continuing professional education. As such,
PARALOID KM-1 Acrylic Impact Modifier
Technical Data Sheet PARALOID KM-1 Acrylic Impact Modifier For Weatherable Vinyl Building Applications Regional Product Availability Description Europe PARALOID KM-1 Acrylic Impact Modifier belongs to
Section 1 General Information... 4. Description... 4 Properties and Characteristics... 4 Processing... 5 Applications... 5
Table of Contents Section 1 General Information......................................... 4 Description........................................................................ 4 Properties and Characteristics........................................................
Environmental Stress Crack Resistance Of Polyethylene
Introduction to Environmental Stress Cracking and ESCR Over the past decade, high-density polyethylene (HDPE) materials have improved significantly and now meet more stringent performance standards; some
Benefits of Thermax N990 in EPDM Compounds
TECHNICAL BULLETIN EPDM Compounds Thermax medium thermal carbon black N990 is manufactured by the thermal decomposition of natural gas. The thermal process provides a unique carbon black characterized
Chlorinated polyethylene ELASLEN TM. Application for Wire and Cable
Chlorinated polyethylene ELASLEN TM Application for Wire and Cable 1 About the company Company Name : SHOWA DENKO K.K. Type of Industry : Diversified Chemical Company Formed : June 1, 1939 Employee : 10,577
Plastics and Polymer Business. Properties enhancement for Plastics
News Letter Vol. 18, issue October-December, 2012 Hyperdispersants and Coupling Agents for Thermoplastics and Thermosets Solplus, Ircolplus and Solsperse hyperdispersants and coupling agents have been
INJECTION MOLDING PROCESSING GUIDE Polymer
FOAMAZOL Chemical Foaming Agents INJECTION MOLDING PROCESSING GUIDE Polymer Foaming Agent INJECTION MOLDING WITH CHEMICAL FOAMING AGENTS Introduction The injection molding of structural foam molded parts
HOSTAFORM C 9021 POM Unfilled
Description Chemical abbreviation according to ISO 1043-1: POM Molding compound ISO 9988- POM-K, M-GNR, 03-002 POM copolymer Standard-Injection molding type with high rigidity, hardness and toughness;
nature invented packaging. We improved it. DuPont Tyvek PROTECTIVE PACKAGING
nature invented packaging. We improved it. DuPont Tyvek PROTECTIVE PACKAGING Why Tyvek? Since its discovery back in 1955, DuPont TM Tyvek has been used in various sectors for a wide range of purposes.
GRADATION OF AGGREGATE FOR CONCRETE BLOCK
GRADATION OF AGGREGATE FOR CONCRETE BLOCK Although numerous papers have been written concerning the proper gradation for concrete mixes, they have generally dealt with plastic mixes, and very little published
CHEMICAL FOAM EXTRUSION PROCESSING GUIDE
FOAMAZOL Chemical Foaming Agents CHEMICAL FOAM EXTRUSION PROCESSING GUIDE Polymer Foaming Agent foam FOAM EXTRUSION USING CHEMICAL FOAMING AGENTS Introduction The basics of foam extrusion consist of mixing
EXPANDED POLYSTYRENE (EPS) INSULATION BOARD SPECIFICATIONS
EXPANDED POLYSTYRENE (EPS) INSULATION BOARD SPECIFICATIONS 1. SCOPE 1.1 This specification covers the type, physical properties and dimensions of Expanded Polystyrene Insulation Board intended for use
GLOBAL MARKETS FOR NON-POLYOLEFIN COMMODITY RESINS
GLOBAL MARKETS FOR NON-POLYOLEFIN COMMODITY RESINS PLS067A January 2013 Jason Chen Project Analyst ISBN: 0-89336-303-0 BCC Research 49 Walnut Park, Building 2 Wellesley, MA 02481 866-285-7215, 781-489-7301
MANUFACTURER'S CERTIFICATION SCHEDULE 40 PVC PIPE And SCHEDULE 80 PVC PIPE
SCHEDULE 40 PVC PIPE And SCHEDULE 80 PVC PIPE PVC materials used in Schedule 40 and Schedule 80 pipe manufactured by Texas United Pipe, Inc., comply with the ASTM Standard D-1784 and are a Type I Grade
ROHM AND HAAS PLASTICS ADDITIVES BUILDING AND CONSTRUCTION SEGMENT Asia Pacific Region Product Range
ROHM AND HAAS PLASTICS ADDITIVES BUILDING AND CONSTRUCTION SEGMENT Asia Pacific Region Product Range Rohm and Haas Company Rohm and Haas is a leading global provider of technically advanced material solutions
1. Injection Molding (Thermoplastics)
1. Injection Molding (Thermoplastics) l Molding: Injection (thermoplastics) INJECTION MOLDING of thermoplastics is the equivalent of pressure die casting of metals. Molten polymer is injected under high
EXTERIOR LONG GLASS FIBER POLYPROPYLENE SYSTEM FOR AUTOMOTIVE APPLICATIONS. Abstract
EXTERIOR LONG GLASS FIBER POLYPROPYLENE SYSTEM FOR AUTOMOTIVE APPLICATIONS D. Fuller, S. Green, T. Ho, T. Kajdan, R. Lee, M. McKelvy, T. Sutton, T. Traugott The Dow Chemical Company, Dow Automotive Abstract
WORLD PLASTICS MARKET REVIEW. By Bill Kuhlke and Dr. Tom Walsh
WORLD PLASTICS MARKET REVIEW By Bill Kuhlke and Dr. Tom Walsh OUTLINE OVERVIEW OF THE PLASTICS INDUSTRY MAJOR THERMOPLASTICS TO BE REVIEWED POLYETHYLENE POLYPROPYLENE POLYSTYRENE CONCLUSIONS THE PLASTICS
Global PVC Stabilizer Trends for Pipes Challenges and Practical Experience
Global PVC Stabilizer Trends for Pipes Challenges and Practical Experience Plastic Pipes XVI, Barcelona 24-26 September 2012 Dr. Udo Anders Agenda Overview PVC pipes, stabilizers and markets Worldwide
Conduit Fittings & Accessories Directional Drilling Conduit Utility Duct Telephone Duct Residential Boxes
CANTEX INC. 301 Commerce Ste 2700 Fort Worth, Texas 76102 817-215-7000 Fax: 817-215-7001 Conduit Fittings & Accessories Directional Drilling Conduit Utility Duct Telephone Duct Residential Boxes YOUR FULL
SALES (800) 445-6607 FAX
Acrylic Information Cell Cast Acrylic Sheet comes in a wide range of sizes and thicknesses and is available as a colorless sheet, as well as in a variety of transparent, translucent and opaque colors.
JONCRYL ADR-4380 LIQUID POLYMERIC CHAIN EXTENDER FOR CONDENSATION THERMOPLASTICS. Key Features & Benefits. General Information. Increases IV and Mw
JONCRYL ADR-4380 Key Features & Benefits Increases IV and Mw Upgrades recycled PET and PA for Fiber Applications Upgrades quality of PET and polyesters for Sheet and Fiber. LIQUID POLYMERIC CHAIN EXTENDER
FOREWORD. The Plastics Pipe Institute. This Technical Note, TN-30, was first issued in January 2006 and was revised and republished in September 2013.
Requirements for the Use of Rework Materials in Manufacturing of Polyethylene Gas Pipe TN-30/2013 105 Decker Court, Suite 825, Irving, TX 75062 P: 469-499-1044 F: 469-499-1063 www.plasticpipe.org FOREWORD
NORTHFIELD METAL PRODUCTS
NORTHFIELD METAL PRODUCTS CUSTOM METAL & PLASTIC COMPONENT MANUFACTURING SINCE 1974 PROGRESS through engineering & design WHO WE ARE Northfield Metal Products, located in Waterloo Ontario Canada, has been
About PMC Polymer Additives
Polymer Additives 2 About PMC Polymer Additives PMC Group offers one of the broadest portfolios of polymer additives in the industry - in a range of product types (custom blends, discrete components or
PROCESSING OF VARIOUS MATERIALS
4 PROCESSING OF VARIOUS MATERIALS CHAPTER CONTENTS 4.1 Shaping Processes for Polymers Polymers Manufacturing Processes for Polymers 4.2 Rubber Processing Technology Processing of rubber into finished good
ANTIOXIDANTS. ...used to prevent thermal degradation. ...inhibit oxidation (i.e. degradation) are cheap insurance for multiple pass materials
ANTIOXIDANTS...used to prevent thermal degradation...inhibit oxidation (i.e. degradation) are cheap insurance for multiple pass materials Antioxidants are generally divided into primary and secondary categories.
INNOVATIVE PLASTICS HIGH & LOW SHEAR RATE RHEOLOGY
INNOVATIVE PLASTICS HIGH & LOW SHEAR RATE RHEOLOGY A SABIC COMPANY Innovative Plastics is a strategic business unit of SABIC. Founded in 1976, SABIC is today the first public, global multinational enterprise
SECTION 02720 SANITARY SEWER AND STORM DRAIN SYSTEMS
SECTION 02720 SANITARY SEWER AND STORM DRAIN SYSTEMS PART 1 GENERAL 1.01 SECTION INCLUDES A. The requirements for pipe material and installation in sewer and drainage collection systems. All materials
PLASTIC/METAL HYBRID TECHNOLOGY. Innovative Design Solutions for Structural Performance with Weight and Cost Reduction
PLASTIC/METAL HYBRID TECHNOLOGY Innovative Design Solutions for Structural Performance with Weight and Cost Reduction LANXESS Corporation Unites Plastic and Metal to Help Manufacturers Create Products
RTV162. Electronic Grade Silicone Adhesive Sealant
RTV162 Product Description Electronic Grade Silicone Adhesive Sealant RTV162 adhesive sealant from GE Silicones is one-component, readyto-use electronic grade silicone sealant. It cures to a tough, resilient
Notes on Polymer Rheology Outline
1 Why is rheology important? Examples of its importance Summary of important variables Description of the flow equations Flow regimes - laminar vs. turbulent - Reynolds number - definition of viscosity
still different technique of assessment.
D E N S I T Y A N A L Y S I S Micromeritics gas pycnometers are being used worldwide to obtain material density measurements. These measurements are necessary in the manufacture of many of today s products.
Amodel AS-1133 HS. polyphthalamide. Technical Data Sheet
Technical Data Sheet Amodel AS-1133 HS Amodel AS-1133 HS is a 33% glass reinforced, heat stabilized (PPA) resin that provides excellent structural integrity in molded parts, even those with wall thicknesses
07 21 19 Guide Specification STAYFLEX CORROSION CONTROL AND THERMAL INSULATION SYSTEM
07 21 19 STAYFLEX CORROSION CONTROL AND THERMAL INSULATION SYSTEM 7819 Broadview Road Cleveland, OH 44131 800-522-4522 February, 2011 SPEC NOTE: This guide specification is intended for use when specifying
01 - Plastic Pipe Cements and Primers
01 - Plastic Pipe Cements and Primers Q - What is the shelf life of the cement and primers? PVC & ABS Cements / Primers and Cleaners have 3 year shelf life from date of manufacture, and CPVC has 2 year
How light impacts recycled polyethylene terephthalate (rpet) characteristics. by Dr. Francis M. Schloss and Julie Brown Plastic Technologies, Inc.
How light impacts recycled polyethylene terephthalate (rpet) characteristics by Dr. Francis M. Schloss and Julie Brown Plastic Technologies, Inc. How light impacts recycled polyethylene terephthalate (rpet)
Technical Specification Fire Blanket Firemaster Fire Protection-Cables Tray Fire Protection Department
INABENSA INABENSA Technical Specification Fire Blanket Firemaster Fire Protection-Cables Tray Fire Protection Department Blanket is a non-combustible flexible blanket made by alkaline earth silicate fibers,
Hook-Up and Lead Wire
3.1 Hook-Up and Lead Wire 3 Table of Contents Hook-Up & Lead Wire Page Introduction: UL Style & CSA Type Listings 3.2 PVC 3.3 3.8 300V, 80 C 3.3 300V, 105 C 3.4 600V, 105 C 3.5 (Type MW) MIL-W-76C-PVC:
PRODUCTS & SERVICES. Slide Closure Trash Can Liners Poly-Net & Mesh Stand-up Pouches
High Quality Competitive Pricing PRODUCTS & SERVICES On-Time Deliveries Technical Expertise Bags Flat Film Singlewound Materials LDPE Gusseted Doublewound LLDPE On rolls Centerfold HDPE Shrinkable Layflat
OVERVIEW OF CONSULTING AND AUDITING PROJECTS
OVERVIEW OF CONSULTING AND AUDITING PROJECTS AEROSPACE & AUTOMOTIVE Aircraft Propellers - The buildup of static electricity on propeller blades was a concern. SOLUTION: Materials were tested at ETS and
B. ASTM C 533 Calcium Silicate Block and Pipe Thermal Insulation. C. ASTM C 547 Mineral Fiber Preformed Insulation
PART 1: GENERAL 1.01 Purpose: A. This standard is intended to provide useful information to the Professional Service Provider (PSP) to establish a basis of design. The responsibility of the engineer is
DuPont Packaging & Industrial Polymers
DuPont Packaging & Industrial Polymers DuPont Biomax Thermal 300 Biomax Thermal Resins Product Data Sheet Description Product Description Biomax Thermal 300 is an ethylene copolymer with a nucleating agent
A Guide to Thermoform Processing of Polypropylene. Introduction
A Guide to Thermoform Processing of Polypropylene Introduction Thermoforming is the process of heating plastic sheet to a pliable state and forming it into shape. Thermoforming offers processing advantages
Plastics: An Energy-Efficient Choice
Plastics: An Energy-Efficient Choice Introduction Plastics are derived from petroleum and natural gas. With increased public awareness and concern about waste and energy issues, some have questioned whether
HexWeb CR III Corrosion Resistant Specification Grade Aluminum Honeycomb
Corrosion Resistant Specification Grade Aluminum Honeycomb Description 5052 and 5056 expanded aerospace grade aluminum honeycomb materials are available in a wide selection of cell sizes and foil gauges.
Lumogen F. Technical Information. Collector dyes. Colorants and Graphic Systems. TI/P 3201 e (9125) November 1997
Technical Information Lumogen F TI/P 3201 e (9125) November 1997 = Registered trademark of BASF Aktiengesellschaft Collector dyes Colorants and Graphic Systems Lumogen F The ability of fluorescent dyes
COMMERCIAL ITEM DESCRIPTION PACKAGING MATERIAL, SHEET
[METRIC] A-A-59135 28 OCTOBER 1997 SUPERSEDING PPP-C-1752D(3) 1 FEBRUARY 1993 COMMERCIAL ITEM DESCRIPTION PACKAGING MATERIAL, SHEET The General Services Administration has authorized the use of this commercial
Standard Specification for Polyethylene Plastics Molding and Extrusion Materials 1
Designation: D 4976 04a Standard Specification for Polyethylene Plastics Molding and Extrusion Materials 1 This standard is issued under the fixed designation D 4976; the number immediately following the
EXTRUDER FEEDING SYSTEMS
EXTRUDER FEEDING SYSTEMS www.kreyenborg-pt.com www.kreyenborg-group.com KREYENBORG GROUP BEST TECHNOLOGY INSIDE! The KREYENBORG GROUP is comprised of the following companies: KREYENBORG GmbH, BKG Bruckmann
Anodes and Misc Equipment
Anodes and Misc Equipment Application: Platinised Titanium Anodes Platinised titanium anodes are recommended for use in the following electrolytic processes:- Precious metal electroplating - e.g. Au, Pt,
Lightweighting Custom enewsletter
MuCell Injection Molding: Unique Process Solutions for Light Weighting Plastic Parts MuCell Injection Molding Brent Strawbridge, Vice President Sales Lightweighting Custom enewsletter AGENDA Technology
IS800 Series. Technical Data Sheet IS802, IS803, IS808, IS800.09. Description. Key Features and Benefits. Typical Physical Properties
1810.html Technical Data Sheet IS800 Series IS802, IS803, IS808, IS800.09 Description IS802, IS803, IS808 and IS800.09 one-component, ready-to-use silicone adhesive sealants have a paste-like consistency
Worldwide tank building applications using PP-Sheets: The effect of Foaming on properties
Worldwide tank building applications using PP-Sheets: The effect of Foaming on properties Marcus Hoffmann 1, Dominic Müller 1, Marco Stallmann 1, Matt Curtis 2 1 Simona AG Teichweg 16, 55606 Kirn, Germany
IPC-SM-840C. Qualification and Performance of Permanent Solder Mask IPC-SM-840C. The Institute for. Interconnecting. and Packaging Electronic Circuits
The Institute for Interconnecting and Packaging Electronic Circuits Qualification and Performance of Permanent Solder Mask January 1996 A standard developed by the Institute for Interconnecting and Packaging
Disco Purge Procedure
Page 1 of 6 Disco Purge Procedure Click to print. For more information, e-mail us at: packaging@dupont.com The Disco Purge Procedure for Extrusion Coaters Surlyn packaging resin Nucrel acid copolymer resin
Injection molding equipment
Injection Molding Process Injection molding equipment Classification of injection molding machines 1. The injection molding machine processing ability style clamping force(kn) theoretical injection volume(cm3)
More inside :: Tackle even the toughest water treatment piping challenges with
More inside :: Tackle even the toughest water treatment piping challenges with Corzan Industrial Systems Corrosion to pipes, valves and fittings caused by chemicals and microbes can greatly impact the
Hytrel polyester elastomer
Product Information HTY-01 (R) Hytrel polyester elastomer Rheology and Handling Hytrel polyester elastomers are true thermoplastic polymers that are processed using conventional thermoplastic techniques.
Abstract Process Economics Program Report No. 141A POLYETHYLENE TEREPHTHALATE BOTTLES AND BOTTLE RESINS (May 1993)
Abstract Process Economics Program Report No. 141A POLYETHYLENE TEREPHTHALATE BOTTLES AND BOTTLE RESINS (May 1993) PET bottles are manufactured from PET bottle-grade resin by a sequential injection molding
ENTRANCE MATS & GRIDS
152 Rollins Avenue #102 Rockville, MD 20852 800-762-9010 240-780-3309 (f) http://www.americanfloormats.com ENTRANCE MATS & GRIDS PART I - GENERAL 1.01 Summary A. This section includes the following types
Metal Wall Panels. Colorweld 300 Architectural Finishes
Metal Wall Panels Colorweld 300 Architectural Finishes Metal Wall standard architectural finishes These products are protected and colored with high-performance Colorweld 300 coatings ensuring precise
Contact Hueson Corporation for additional information or details. http://www.huesonwire.com 38 Sutton Street Northbridge, MA 01534 508-234-6372
Hueson Corporation of Northbridge MA, a specialty wire and cable manufacturer has recently introduced a solution to a long term industry challenge in the Trailer Cable Industry. Their solution involves
PVC Pipe PVC SCHEDULE 40. Nominal Pipe Size (in.) 1/8. Average I.D. O.D.
CONDENSED CATALOG PVC HPB-0-A Effective 9//97 Revised //99 CLEAR / / / / -/ -/ -/ x/ CLEAR / / / / -/ PVC SDR. PSI (Water @ 7. F.) /.0.9.0.0 PVC SDR -/ -/ -/ 0 0 PVC SCHEDULE 0.0.7.0.00..7.7.00.000.00...
s ation lic app ntial Foamular sideor RE uide F Ily G am ation F sul In
Family GUIDE FOR RESIDENTIAL applications Foamular Where quality and performance make a home The OWENS CORNING FOAMULAR XPS INSULATION FAMILY ALBUM is a critical feature of any home impacting overall comfort
ROHACELL Triple F. Complex shaped PMI Foam Cores for highly efficient FRP Composite
Complex shaped PMI Foam Cores for highly efficient FRP Composite ROHACELL Triple F Sandwich Fabrication for low to - A Novel Particle Foam high volume applications SAMPE tesdr. Kay Brazil Conference 2015
ModuSec. Secure and efficient IT room solutions Composite Panel Systems Compared. Panel Systems are not all the same!
Secure and efficient IT room solutions Composite Panel Systems Compared Panel Systems are not all the same! When it comes to accommodating critical IT systems, the first issue to look at is the environment
TAN Triaminononane H 2 N NH 2. (4 aminomethyl 1,8 octanediamine) Trifunctional amine with low molecular weight CAS NO. 1572-55-0
TA Triaminononane (4 aminomethyl 1,8 octanediamine) Trifunctional amine with low molecular weight AS. 1572-55-0 Triaminononane (TA) is a low molecular weight specialty performance material with three amine
#3 The Study of Molecular Orientation by Linear Dimension Change of Polymeric Films
#3 The Study of Molecular Orientation by Linear Change of Polymeric Films I. INTRODUCTION To close the yellow note, click once to select it and then click the box in the upper left corner. To open the
CONTRACT PRICE ADJUSTMENT PROVISIONS (CPAP)
CONTRACT PRICE ADJUSTMENT PROVISIONS (CPAP) Work Groups Composition and Weightings of Sub-indices CURRENT AS AT 1 JANUARY 2013 Issued by the CPAP Committee Distributed by the Association of South African
pvc well casing & drop pipe
CertainTeed pvc well casing & drop pipe PVC Well Products Sure Fit PVC well casing and drop pipe have gained broad acceptance since their introduction almost 40 years ago. Today, due to its outstanding
3M Scotchcast Electrical Resin 251 Two-Part, Oven-Curing, Class F, Rigid, Filled, Epoxy Liquid Resin
3M Scotchcast Electrical Resin 251 Two-Part, Oven-Curing, Class F, Rigid, Filled, Epoxy Liquid Resin Data Sheet April 2013 Description 3M Scotchcast Electrical Resin 251 is a medium viscosity, rigid, Class
COMMERCIAL ITEM DESCRIPTION CUSHIONING MATERIAL, PACKAGING, CLOSED CELL FOAM PLANK
[METRIC] A-A-59136 28 OCTOBER 1997 SUPERSEDING PPP-C-1752D(3) 1 FEBRUARY 1993 COMMERCIAL ITEM DESCRIPTION CUSHIONING MATERIAL, PACKAGING, CLOSED CELL FOAM PLANK The General Services Administration has
Casting. Training Objective
Training Objective After watching the program and reviewing this printed material, the viewer will learn the essentials of the various metal casting processes used in industry today. The basic principles
The Economic Benefits of Polyvinyl Chloride in the United States and Canada
The Economic Benefits of Polyvinyl Chloride in the United States and Canada PREPARED FOR: Chlorine Chemistry Division of the American Chemistry Council and The Vinyl Institute By Whitfield & Associates