Technical Specification Fire Blanket Firemaster Fire Protection-Cables Tray Fire Protection Department

Transcription

1 INABENSA INABENSA Technical Specification Fire Blanket Firemaster Fire Protection-Cables Tray Fire Protection Department

2 Blanket is a non-combustible flexible blanket made by alkaline earth silicate fibers, used in applications of fire protection against cellulosic or hydrocarbons fire. The fiber formulation used is more soluble in human body and has excellent thermal and acoustic properties. In its manufacture binders are not used, there are no smokes, toxic gases or emissions, also it has no loss of tensile strength during fire exposure. It is an easy product to install because it is flexible and resistant, with good tensile strength. During installation and assembly is not necessary to use special tools and can be cut with knife. The blanket is covered externally by a thin foil of 40 microns fixed to the fiber by sodium silicate glue. This thin foil ensures an excellent protection to the weather such as rain outside. Recommended Uses: A class and IMO HSC steel, aluminium and PVC composite bulkhead and deck insulation in high speed craft Upgrading of fire performance of composite panels to meet IMO room corner test requirements H class and A class steel bulkhead and deck fire protection for ships and off shore platforms Hydrocarbon and Jet fire protection of process pipes Hydrocarbon and Jet fire protection of vessels Infill to fire doors and cladding panels Construction joints Cellulosic and hydrocarbon fire protection of structural steelwork Ductwork fire protection Cable tray fire protection

3 Fire Protection Properties: Non-combustibility: IMO A799 (19) using ISO (E) method Approved product number under EU Marine Equipment Directive: 0062 Main Tests: Hydrocarbon fire protection in cable trays up to 30 minutes according to ASTM E 1725 and ASTM E 1529 Hydrocarbon fire protection for 30 minutes under controlled real fire, done by Inabensa Protisa with Cepsa collaboration. Technical Characteristics: Powder bulk density Thickness 128 Kg/m3 50 mm Linear shrinkage (24 hrs at 1000ºC) < 1 % Loss on ignition (5 hrs at 1000ºC) < 0,1 % Flame spread ASTM E-84 0 Fuel contributed ASTM E-84 0 Smoke developed ASTM E-84 0 Thermal insulation properties ENV (Thermal conductivity) 200ºC 300ºC 400ºC 500ºC 600ºC 0,06 0,08 0,10 0,13 0,16 Sound Absorption Coefficient ( 25 mm) S/BS3638 0,82 Presentation: Rolls of 6100 x 1220 mm. Health Aspects Summary: FireMaster 607 was designed for enhanced solubility in lung tissues. Rats have been exposed 6 hours a day, 5 days a week during 2 years at an average concentration of 200 F/ml (about 200 to 300 times higher than the concentration found in production plants) without showing any significant increase in lung tumours or fibro s i s.

4 Assembly Drawings:

5 Instalaciones Inabensa - Protisa MADRID Los vascos, 17 2ª planta. protisa@abengoa.com Telf.: Inabensa Protisa has a system of quality assurance according to UNE EN ISO 9002 that ensures the product is free of defects. The information in this data sheet is based in our experience and technical knowledge, obtained from laboratory tests and bibliography. Protisa reserves the right to introduce any change without notice it. As use of this product is beyond our control, we only commit to replace or restore any product our laboratory find defective. We do not assume any responsibility or economical obligation beyond the purchase price of our products. Any other express or implied warranty is given. Any other use of this information beyond the stated purpose of this data sheet will not be Inabensa-Protisa s Responsibility