Pipe Fittings 5404N. Pg. 99 Increase & Extension Connector 1-MP 2-FP Pg. 97 Seamless Pipe Nipple 1-MP (Both) 2-LENGTH
|
|
- Shawn Kelley
- 7 years ago
- Views:
Transcription
1 5000 (4038) (4037) 5404N 5405 (4039) 5406 (4040) 5406C 5406P (3009E) Pg. 94 Pipe Coupling -FP -FP 5407 (3009A) Pg. 95 Union Pipe Coupling -FP -FP 5408 (3009G) Pg. 96 Hex Pipe Nipple -MP -MP 5409 (3009N) Pg. 97 Seamless Pipe Nipple -MP (Both) -LENGTH Pg. 99 Increase & Extension Connector -MP -FP 540 Pg. 0 Reducer Bushing -MP -FP 5500 Pg. 0 Female Pipe Cap -FP 550 Pg. 03 Hex Head Pipe Plug -MP 550 (4039) Pg. 03 Pg. 04 Pg. 04 Pg. 05 Aluminum Pg. 05 Pg. 06 Pg. 07 Square Head Pipe Plug Square Socket Pipe Plug Hex Socket Pipe Plug Hex Socket Pipe Plug Flush Seal Pipe Plug Male Pipe Elbow Male Pipe Elbow -MP -MP -MP -MP -MP 7/8 Taper -MP -MP -MP -MP 550C 5503 (40339) 5504 (4038) 5505 (40338) (4044) Pg. 09 Compact Pg. 09 Street Dot Ell Street Elbow -MP -FP -MP -FP 5604 (4045) 5605 (40438) Pg. 0 Female Pipe Elbow -FP -FP 565 Pg. 0 Female Pipe Elbow -FP -FP Pg. Male Pipe Tee -MP -MP 3-MP Pg. Female Pipe Branch Tee -MP -MP 3-FP Pg. Street Tee -MP -FP 3-FP Pg. 08 Street Elbow -MP -FP 5603 Pg. 3 Female Pipe Run Tee -MP -FP 3-MP Our Symbol of Quality Pg. 3 3 Male Pipe Branch Tee -FP -FP 3-MP Pg. 3 3 Female Pipe Tee -FP -FP 3-FP Pipe Points Pg. 4 3 Female Pipe Cross,, 3, 4-FP Pg. 4 MP x Male Pipe Swivel -MP -MPX Since Pipe Threads Crush to create a seal, they should be limited to one use only, unless the application is low pressure. To prevent System Contamination avoid placing sealant on the first two threads. We recommend Anaerobic Pipe Sealant for the best pipe seal. TM Teflon tape should be wrapped around the threads a maximum of two times and should NOT be used with anaerobic pipe sealant. Teflon is a trademark of DuPont. Pg. 5 MJ x Male Pipe Swivel -MJ -MPX Pg. 5 FP x Male Pipe Swivel -FP -MPX Please Note 3D Drawings available on request. Page 93
2 General NPTF Drawing Pipe Threads NPTF Wrench Tight-Crest to Root & Flank Contact NPTF Hand Tight-Crest to Root & Flank Contact NPT-Wrench Tight-No Crest to Root Contact, Flank Contact only The Pipe Fitting has been with us since hydraulics first appeared on the scene and it is still with us today on applications all over the world. The difference is that today s pipe thread comes in many different Standards. The most common pipe threads in North America are designated as: NPT = American (National) Standard Pipe Taper NPTF = American (National) Standard Pipe Taper Fuel (Dryseal) Both NPT and NPTF taper pipe threads seal by deformation of the threads. NPTF threads have a Dryseal designation with the Crest-Root contact designed so that no spiral leak path is left. Pressure Connections uses the NPTF thread, except where noted, because it has greater holding power and resistance to leakage. Although NPTF threads are designed to seal without the use of any pipe sealant, pipe sealant is normally used and recommended for added protection against leakage, galling, and spreading the torque evenly when tightening. Sealant Paste Application: After making sure the threads are clean, evenly apply the paste over the threads exercising care not to leave any air pockets or bubbles. Be sure to leave the first / to -/ threads bare to avoid system contamination. CAUTION: Do not use both paste and tape simultaneously. Sealant Tape Application: After making sure the threads are clean, tightly wrap the tape in the clockwise direction overlapping half the width of the tape with each wrap. Apply no more than two plies per thread leaving the first two threads bare to avoid system contamination. Pipe Thread Assembly: With proper sealant applied, tighten the pipe threads Full Turns past finger tight on sizes up to / with Larger Sizes being.5.5 Full Turns past finger tight. To obtain a correct alignment for elbows and tees follow these instructions and then continue tightening to the desired point. Be careful NOT to accidentally back off or loosen a pipe thread to obtain the correct alignment because this may result in a spiral leak path. It should be noted that a pipe thread is NOT recommended for vibration or temperature cycling environments. Pipe threads should also be limited to ONE use in high pressure hydraulic applications. Hydraulic are dimensionally standardized by SAE under J54, but due to differing manufacturing methods, and interpretation of conformance, actual performance will vary between brands. This is where our Quality Assurance Department sets us apart from many other manufacturers. Pressure Connections takes great pride in each fitting we sell. Standard material for our is steel with a RoHs compliant 96-hour salt spray finish that exceeds the SAE 7-hour salt spray requirement. For details about our Quality Assurance Program please reference the inside front cover of this catalog. Page 9
3 Pipe Thread information is on pages Pipe Coupling Female Pipe x Female Pipe SAE 4038 Ref. Aeroquip 096 Ref. Parker GG / 00 Ref. Weatherhead C C L W Operating -FP -FP Female NPTF Female NPTF Hex Length Diameter Pressure /8-7 /8-7 5/ , /4-8 /8-7 3/ , /4-8 /4-8 3/ , /8-8 /8-7 7/ , /8-8 /4-8 7/ , /8-8 3/8-8 7/ , / - 4 /4-8 / , / - 4 3/8-8 / , / - 4 / - 4 / , /4-4 /4-8 3/ , /4-4 3/8-8 3/ , /4-4 / - 4 3/ , /4-4 3/4-4 3/ , / / - 4 5/ , / 3/4-4 5/ , / - / 5/ , /4 - / - / ".93.00, /4 - / /4 - / ".93.00, / - / / - / 3/ , / - / 7/ ,500 The W diameter on the /4 side of part number is Quality Assurance Tips Pressure Connections provides up to date Gauge Certifications as as part of our equipment and Gauge Calibration Program. We out-source our gauge calibrations to ensure inspection consistency. Page 94
4 Pipe Thread information is on pages 9 93 SAE J54???? 5050 Union Pipe Coupling Female Pipe x Female Pipe 3-Piece Design C L Operating -FP -FP Female NPTF Female NPTF Hex Length Pressure /8-7 /8-7 /8.69 5, /4-8 /4-8 3/8.84 5, /8-8 3/8-8 5/8.00 4, / - 4 / - 4 7/8.9 3, /4-4 3/4-4 /8.34, / - / 3/8.50, /4 - / /4 - / 7/8.63, / - / / - / 3 /4.94, / - / 4" 3.5,00 Quality Assurance Tips We maintain our prints and update our manufacturing processes to the Latest SAE Standards. Page 95
5 Pipe Thread information is on pages Hex Pipe Nipple Male Pipe x Male Pipe SAE 4037 Ref. Aeroquip 083 Ref. Parker FF / 00 Ref. Weatherhead C C L Operating -MP -MP Male NPTF Male NPTF Hex Length Pressure /8-7 /8-7 7/6.06 6, /4-8 /8-7 5/8.6 6, /4-8 /4-8 5/8.45 6, X /4-8 /4-8 5/8.45 6, /8-8 /8-7 3/4.6 6, /8-8 /4-8 3/4.45 6, X 3/8-8 /4-8 3/4.45 6, /8-8 3/8-8 3/4.45 6, X 3/8-8 3/8-8 3/4.45 6, / - 4 /8-7 7/8.5 6, / - 4 /4-8 7/8.70 6, / - 4 3/8-8 7/8.70 6, / - 4 / - 4 7/8.89 6, /4-4 /8-7 /8.59 6, /4-4 /4-8 /8.78 5, /4-4 3/8-8 /8.77 5, /4-4 / - 4 /8.96 5, /4-4 3/4-4 /8.96 5, / / - 4 3/8.09 4, / 3/4-4 3/8.5 4, / - / 3/8.34 4, /4 - / /4-8 3/4.99` 3, /4 - / 3/4-4 3/4.6 3, /4 - / - / 3/4.45 3, /4 - / /4 - / 3/4.48 3, / - / 3/4-4 ".36 3, / - / - / ".55 3, / - / /4 - / ".58 3, / - / / - / ".6 3, / - / /.73, / /4 - / /.76, / / - / /.79, / - / /.8,000 These part numbers have a 30 chamfer on both male pipes. Page 96
6 Pipe Thread information is on pages 9 93 SAE J54???? Ref. Aeroquip 084 Ref. Parker FFF (Hex Style) 5404N Seamless Pipe Nipple Male Pipe x Male Pipe 30 Chamfer 5404N-- L Operating -MP -LENGTH Male NPTF Length Length Pressure 5404N-0-CLOSE / /4 6, N-0-.5 / / 6, N-0- / " 6, N-0-.5 / / 6, N-0-3 / " 6, N / / 6, N-0-4 / " 6, N / / 6, N-0-5 / " 6, N / / 6, N-0-6 / " 6, N-04-CLOSE / /6 6, N / / 6, N-04- / " 6, N / / 6, N-04-3 / " 6, N / / 6, N-04-4 / " 6, N / / 6, N-04-5 / " 6, N / / 6, N-04-6 / " 6, N-06-CLOSE 3/ " 6, N / / 6, N-06-3/ " 6, N / / 6, N / " 6, N / / 6, N / " 6, N / / 6, N / " 6, N / / 6, N / " 6,000 Continued on next page. Please Note Seamless Pipe Nipples (5404N) are the same High Quality and PSI Ratings as the Hex Pipe Nipples (5404), which are both plated and capped for thread protection. Page 97
7 Pipe Thread information is on pages N Seamless Pipe Nipple Male Pipe x Male Pipe SAE J54???? Ref. Aeroquip 084 Ref. Parker FFF (Hex Style) 30 Chamfer Continued from previous page. 5404N-- L Operating -MP -LENGTH Male NPTF Length Length Pressure 5404N-08-CLOSE / - 4. /4 6, N / / 6, N-08- / " 6, N / / 5, N-08-3 / " 5, N / / 5, N-08-4 / " 5, N / / 5, N-08-5 / " 5, N / / 5, N-08-6 / " 5, N--CLOSE 3/ /8 5, N--.5 3/ / 5, N-- 3/ " 4, N--.5 3/ / 4, N--3 3/ " 4, N / / 4, N--4 3/ " 4, N / / 4, N--5 3/ " 4, N / / 4, N--6 3/ " 4, N-6-CLOSE - /.63 5/8 4, N-6- - /.00 " 4, N /.50 / 4, N / " 3, N / / 3, N / " 3, N / / 3, N / " 3, N / / 3, N / " 3, N-0-CLOSE /4 - /.94 5/6 3, N-0- /4 - /.00 " 3, N-0-.5 /4 - /.50 / 3, N-0-3 /4 - / " 3, N /4 - / / 3, N-0-4 /4 - / " 3, N-4-CLOSE / - /.75 3/4 3,000 Page 98
8 Pipe Thread information is on pages 9 93 SAE 4039???? Ref. Aeroquip 040 Ref. Parker FG / 00 Ref. Weatherhead C Increase & Extension Connector Male Pipe x Female Pipe C L Operating -MP -FP Male NPTF Female NPTF Hex Length Pressure /8-7 /8-7 5/8.04 6, /8-7 /4-8 3/4. 6, /8-7 3/8-8 7/8.5 6, /8-7 / - 4 /8.50 5, /4-8 /8-7 5/8.0 6, /4-8 /4-8 3/4.39 6, /4-8 3/8-8 7/8.44 6, /4-8 / - 4 /8.70 5, /4-8 3/4-4 3/8.93 4, /8-8 /4-8 3/4.5 6, /8-8 3/8-8 7/8.44 6, /8-8 / - 4 /8.68 5, /8-8 3/4-4 3/8.76 4, / - 4 /4-8 7/8.50 6, / - 4 3/8-8 7/8.85 5, / - 4 / - 4 /8.87 5, / - 4 3/4-4 3/8.93 4, / / 5/8.0 3, /4-4 3/8-8 /8.50 5, /4-4 / - 4 /8.57 5, /4-4 3/4-4 3/8.93 4, /4-4 - / 5/8.37 3, /4-4 /4 - / ".3, / / - 4 3/8.6 3,000 Continued on the next page. Please Note Reducer Bushing (5406) is on page 0. Seamless Pipe Nipples (5404N) are the same High Quality and PSI Ratings as the Hex Pipe Nipples (5404), which are both plated and capped for thread protection. Page 99
9 Pipe Thread information is on pages Increase & Extension Connector Male Pipe x Female Pipe SAE 4039???? Ref. Aeroquip 040 Ref. Parker FG / 00 Ref. Weatherhead C309 Continued from the previous page C L Operating -MP -FP Male NPTF Female NPTF Hex Length Pressure / 3/4-4 3/8. 3, / - / 5/8.46 3, / /4 - / ".46, / / - / 3/8.54, /4 - / 3/4-4 ".38, /4 - / - / 3/4.50, /4 - / /4 - / ".49, /4 - / / - / 3/8.5, /4 - / - / 7/8.65, / - / /4 - / ".5, / - / / - / 3/8.53, / - / - / 7/8.63, / - / 7/8.66,500 Page 00
10 Pipe Thread information is on pages 9 93 SAE 4040???? Ref. Aeroquip 08 Ref. Parker PTR / 00 Ref. Weatherhead C Reducer Bushing Male Pipe x Female Pipe C L Operating -MP -FP Male NPTF Female NPTF Hex Length Pressure /4-8 /8-7 5/ , /8-8 /8-7 3/ , /8-8 /4-8 3/ , / - 4 /8-7 7/8.0 6, / - 4 /4-8 7/8.0 6, / - 4 3/8-8 7/8.0 6, /4-4 /8-7 /8.7 6, /4-4 /4-8 /8.7 6, /4-4 3/8-8 /8.7 5, /4-4 / - 4 /8.7 4, / /4-8 3/8.36 4, / 3/8-8 3/8.36 5, / / - 4 3/8.36 4, / 3/4-4 3/8.36 4, /4 - / /4-8 3/4.47 3, /4 - / 3/8-8 3/4.49 3, /4 - / / - 4 3/4.47 3, /4 - / 3/4-4 3/4.47 3, /4 - / - / 3/4.47 3, / - / /4-8 ".57 3, / - / 3/8-8 ".57 3, / - / / - 4 ".57 3, / - / 3/4-4 ".57 3, / - / - / ".57 3, / - / /4 - / ".57, / 3/8-8 /.75, / / - 4 /.75, / 3/4-4 /.75, / - / /.75, / /4 - / /.75, / / - / /.75,000 Page 0
11 Pipe Thread information is on pages C Hex Pipe Cap Female Pipe SAE J C- C L Operating -FP Female NPT Hex Length Pressure 5406C-0 /8-7 / , C-04 /4-8 5/ , C-06 3/8-8 3/ , C-08 / - 4 " , C- 3/4-4 /4 0.96,00 Pipe Points Since Pipe Threads Crush to create a seal, they should be limited to one use only, unless the application is low pressure. To prevent System Contamination avoid placing sealant on the first two threads. We recommend Anaerobic Pipe Sealant for the best pipe seal. TM Teflon tape should be wrapped around the threads a maximum of two times and should NOT be used with anaerobic pipe sealant. Teflon is a trademark of DuPont. Page 0
12 Pipe Thread information is on pages 9 93 SAE 3009E Ref. Aeroquip 08 Ref. Parker HP / 0CP Ref. Weatherhead C P Hex Head Pipe Plug Male Pipe 5406P- C L Operating -MP Male NPTF Hex Length Pressure 5406P-0 /6-7 5/ , P-0 /8-7 7/ , P-04 /4-8 9/ , P-06 3/8-8 / , P-08 / - 4 7/ , P- 3/4-4 /6.05 5, P-6 - / 5/6.5 5, P-0 /4 - / 3/4.47 5, P-4 / - / ".57 3, P-3 - / /.75,500 This size may be counter bored (not pictured). SAE 3009A Ref. BRN 5406-SHP Ref. Parker SHP Ref. Weatherhead C L T Y Operating -MP Male NPTF Length Thickness Flats Pressure / /3 6, / /3 6, / /8 6, / /6 6, / /6 6, / /8 6, / /6 5, /4 - / /6 5, / - / /8 3, / /6,500 Our Square Head Pipe Plugs (5407) are counterbored (cored). This creates a better seal by allowing the system pressure to come up into the plug and hold (expand) the plug s threads into the mating threads. Non Standardized dimensions Square Head Pipe Plug Male Pipe Page 03
13 Pipe Thread information is on pages Square Socket Pipe Plug Male Pipe SAE 3009G L Y Operating -MP Male NPTF Length Flats Pressure / /6 6, / /4 6, / /6 6, / /8 6, / / 5, / 0.77 / 5, /4 - / 0.8 3/4 5, / - / /4 3, / /8, Hex Socket Pipe Plug Male Pipe SAE 3009N Ref. BRN 5406-HP Ref. Aeroquip Ref. Parker HHP Ref. Weatherhead C C L Operating -MP Male NPTF Hex Length Pressure /6-7 5/ , /8-7 3/ , /4-8 / , Y Yellow Zinc /4-8 / , /8-8 5/ , Y Yellow Zinc 3/8-8 5/ , / - 4 3/ , Y Yellow Zinc / - 4 3/ , /4-4 9/ , / 5/ , /4 - / 3/ , / - / 3/ , / 3/4 0.75,500 Non-Standardized. Page 04
14 Pipe Thread information is on pages 9 93 AN 93D Aluminum Hex Socket Pipe Plug Male Pipe Plain Oil Coated C L -MP Male NPTF Hex Length /8-7 3/ /4-8 / /8-8 5/ / - 4 3/ /4-4 9/ / 5/ Flush Seal Seats into port flush with surface. 540 Flush Seal Pipe Plug 7/8 Taper Male Pipe Black Oxide Finish, Alloy Steel 540- C L Operating -MP Male 7/8 Taper Hex Length Pressure /6-7 5/ , /8-7 3/ , /4-8 / , /8-8 5/ , / - 4 3/ , /4-4 9/ ,000 Flush Seal Pipe Plug (540) has a 7/8 taper pipe thread instead of the standard 3/4 taper thread. This allows the plug to seat flush with the port s surface. Page 05
15 Pipe Thread information is on pages Male Pipe Elbow Male Pipe x Male Pipe SAE J54 Ref. Aeroquip 085 Ref. Parker CR / 0 Ref. Weatherhead C N N Y Operating -MP -MP Male NPTF Male NPTF Length Length Flats Pressure /8-7 / /6 6, /4-8 / /6 6, /4-8 / /6 6, /8-8 / /4 6, /8-8 3/ /4 6, / - 4 / /8 6, / - 4 3/ /8 6, / - 4 / /8 6, /4-4 / /6 4, /4-4 3/ /6 4, / 3/ /6 3, / - / /6 3, /4 - / /4 - /.. 5/8, / - / / - / /8, / - / /,800 Quality Assurance Tips Pressure We Connections manufacture provides our parts up to date SAE Gauge specifications. Certifications This as part means of our you ll equipment get long and lasting, Gauge leak-free Calibration performance Program. from We out-source our gauge Pressure calibrations Connections to ensure fittings. inspection consistency. Page 06
16 Pipe Thread information is on pages 9 93 SAE J54 Ref. Aeroquip Male Pipe Elbow Male Pipe x Male Pipe N N Y Operating -MP -MP Male NPTF Male NPTF Length Length Flats Pressure /8-7 / /6 6, /4-8 / /6 6, /8-8 3/ /4 6, / - 4 / /8 6, /4-4 3/ /6 4, / - / /8 3,000 Pipe Points Since Pipe Threads Crush to create a seal, they should be limited to one use only, unless the application is low pressure. To prevent System Contamination avoid placing sealant on the first two threads. We recommend Anaerobic Pipe Sealant for the best pipe seal. TM Teflon tape should be wrapped around the threads a maximum of two times and should NOT be used with anaerobic pipe sealant. Teflon is a trademark of DuPont. Page 07
17 Pipe Thread information is on pages Street Elbow Male Pipe x Female Pipe SAE 4039 Ref. Aeroquip 089 Ref. Parker CD / 0 Ref. Weatherhead C N N Y Operating -MP -FP Male NPTF Female NPTF Length Length Flats Pressure /8-7 / /6 6, /8-7 / /4 6, /4-8 / /6 6, /4-8 / /4 6, /4-8 3/ /8 4, /8-8 / /4 5, /8-8 3/ /8 4, /8-8 / /6 3, / - 4 / /8 3, / - 4 3/ /8 4, / - 4 / /6 3, / - 4 3/ /4 4, /4-4 / /6 3, /4-4 3/ /6 3, /4-4 - /.8.6 5/8, / 3/ /6, / - / /8, /4 - / 3/ /8, /4 - / - / /8, /4 - / /4 - / /8, / - / / - / /6, / - / /6,00 Please Note 3D Drawings available on request. Page 08
18 Pipe Thread information is on pages 9 93 SAE 00R Ref. BRN C Compact Street Dot Ell Male Pipe x Female Pipe 550C-- N Y Operating -MP -FP Male NPTF Female NPTF Length Flats Pressure 550C-0-0 /8-7 / /8 5, C /4-8 / /8 5, C /8-8 /4-8. 3/4 4, C /8-8 3/8-8. 7/8 4, C / - 4 3/ /8 3, C / - 4 / /8 3, C-- 3/4-4 3/ /8,00 SAE Ref. Aeroquip 088 Ref. Parker CD45 / 30 Ref. Weatherhead C Street Elbow Male Pipe x Female Pipe N N Y Operating -MP -FP Male NPTF Female NPTF Length Length Flats Pressure /8-7 / /6 6, /4-8 / /4 6, /8-8 3/ /8 4, / - 4 / /6 3, /4-4 3/ /6 3, / - /.7. 5/8, /4 - / /4 - / /8, / - / / - / /6,500 Page 09
19 Pipe Thread information is on pages Female Pipe Elbow Female Pipe x Female Pipe SAE 4038 Ref. Aeroquip 087 Ref. Parker DD / 0 Ref. Weatherhead C N N Y Operating -FP -FP Female NPTF Female NPTF Length Length Flats Pressure /8-7 / /6 6, /4-8 / /4 6, /4-8 / /4 6, /8-8 / /8 4, /8-8 3/ /8 4, / - 4 / /6 3, / - 4 3/ /6 3, / - 4 / /6 3, /4-4 / /6 3, /4-4 3/ /6 3, / 3/ /8, / - /.6.6 5/8, /4 - / 3/ ", /4 - / /4 - / /8, / - / / - / /6, / - / /6, Female Pipe Elbow Female Pipe x Female Pipe SAE Ref. Parker DD45 / 40 Ref. Weatherhead C N Y Operating -FP -FP Female NPTF Female NPTF Length Flats Pressure /8-7 / /6 6, /4-8 / /4 6, /8-8 3/ /8 4, / - 4 / /6 3, /4-4 3/ /6 3, / - /.9 5/8, /4 - / /4 - /.44 7/8,800 Page 0
20 Pipe Thread information is on pages 9 93 SAE???? 54 Ref. Aeroquip 57 Ref. Parker RRS 5600 Male Pipe Tee MP x MP x Male Pipe N Y Operating -MP -MP -MP Male NPTF Length Flats Pressure / /6 6, / /6 6, /8-8. 3/4 6, / /8 6, / /6 4, /.97 5/6 3, /4 - /. 5/8,500 SAE???? 54 Ref. Aeroquip Female Pipe Branch Tee MP x MP x Female Pipe N N Y Operating -MP -MP -FP Male NPTF Female NPTF Length Length Flats Pressure /8-7 / /6 6, /4-8 / /4 6, /8-8 3/ /8 4, / - 4 / /6 3, /4-4 3/ /6 3, / - / /8, /4 - / /4 - / /8,500 Page
21 Pipe Thread information is on pages Street Tee Male Pipe x FP x FP SAE 4044???? Ref. Aeroquip 09 Ref. Parker MRO / 0T Ref. Weatherhead C N N Y Operating -MP -FP -FP Male NPTF Female NPTF Length Length Flats Pressure /8-7 / /6 6, /4-8 / /4 6, /8-8 3/ /8 4, / - 4 / /6 3, /4-4 3/ /6 3, / - / /8, /4 - / /4 - / /8, / - / / - / /6, Female Pipe Run Tee MP x Female Pipe x MP SAE J54???? Ref. Aeroquip 093 Ref. Weatherhead C N N Y Operating -MP -FP -MP Male NPTF Female NPTF Length Length Flats Pressure /8-7 / /6 6, /4-8 / /4 6, /8-8 3/ /8 4, / - 4 / /6 3, /4-4 3/ /6 3, / - / /8, / - / / - / /6,500 Page
22 Pipe Thread information is on pages 9 93 SAE 4045 Ref. Aeroquip 09 Ref. Parker MMS / T Ref. Weatherhead C Male Pipe Branch Tee FP x FP x Male Pipe N N Y Operating -FP -FP -MP Female NPTF Male NPTF Length Length Flats Pressure /8-7 / /6 6, /4-8 / /4 6, /8-8 3/ /8 4, / - 4 / /6 3, /4-4 3/4-4 & / /6 3, /4-4 3/ /6 3, / - / /8, /4 - / /4 - / /8, / - / / - / /6,500 SAE Ref. Aeroquip 090 Ref. Parker MMO / 0T Ref. Weatherhead C Female Pipe Tee FP x FP x Female Pipe N Y Operating -FP -FP -FP Female NPTF Length Flats Pressure / /6 6, / /4 6, / /8 4, / /6 3, / /6 3, /.6 5/8, /4 - /.70 7/8, / - /.08 9/6, /.39 3/6,00 Page 3
23 Pipe Thread information is on pages Female Pipe Cross FP x FP x FP x FP 4 SAE J54 Ref. Aeroquip 080 Ref. Parker KMMOO / 0X Ref. Weatherhead C M Y Operating -FP Female NPTF Length Flats Pressure / /6 6, / /4 6, / /8 4, / /6 3, / /6 3, /.6 5/8, Male Pipe x Male Pipe Swivel SAE J54 Ref. Aeroquip Male C M N Y Operating -MP -MPX Male NPT NPT Swivel Hex Length Length Flats Pressure /4-8 /4-8 5/ /6 5, /8-8 3/8-8 7/ /4 4, / - 4 / - 4 " /8 3, /4-4 3/4-4 3/ /6,50 Please Note Male Pipe Swivels (5700, 570, 570) are NOT designed to be used as Rotational Swivels. Page 4
24 Pipe Thread information is on pages 9 93 SAE J54 Ref. Aeroquip 49 Ref. Weatherhead Male JIC x Male Pipe Swivel Tube Male C M N Y Operating -MJ -MPX O.D. Male JIC NPT Swivel Hex Length Length Flats Pressure /8 9/6-8 /4-8 5/ /6 4,000 SAE J54 Ref. Aeroquip Female Pipe x Male Pipe Swivel Male C M N Y Operating -FP -MPX Female NPT NPT Swivel Hex Length Length Flats Pressure /4-8 /4-8 5/ /4 5, /8-8 3/8-8 7/ /8 4, / - 4 / - 4 ".3. /8 3, /4-4 3/4-4 3/ /6,50 Minimum order quantity may apply. Please Note Male Pipe Swivels (5700, 570, 570) are NOT designed to be used as Rotational Swivels. Page 5
37 JIC Flare (Nuts) 304C (070112) 306 (070118) 318 (070110) Pg. 22-75-160 Bulkhead Locknut (Use with #2700) Pg. 23 Tube Nut (Use with #319)
37 JIC Flare (Nuts) Components Assembled The 37 JIC (Joint Industrial Council) Flare is a reliable, straight thread, single-flare design that is used world-wide. It is popular in many applications and
More informationIndustrial Pipe Fittings and Adapters The Fitting Authority
Industrial Pipe Fittings and Adapters The Fitting Authority Visual Index CR Male Pipe Elbow FF Pipe Nipple FFF Long Pipe Nipple RRS Male Pipe Tee DD Female Pipe Elbow Industrial Pipe Fittings DD45 Female
More informationStainless Steel Single and Dual Circulation Kits
Instruction Sheet P/N 160780 01 Stainless Steel Single and Dual Circulation Kits Introduction The single and dual high-pressure circulation kits allow you to vary and control the circulation rate of coating
More information800-348-8467 www.fittingsunlimited.com
Thread and Port Identification Guide 800-348-8467 www.fittingsunlimited.com INDEX Index... 1 Explanation of Symbols... 2 How to Measure Threads... 3-4 Metric vs English Threads... 5 North American Connections
More informationPipe Thread Types and Designations
Pipe Thread Types and Designations Overview: Different types of screw threads have evolved for fastening, and hydraulic systems. Of special concern are plastic-to-metal, taper/parallel threaded joints
More informationGAS DISTRIBUTION PRODUCTS STEEL SERVICE TEES
GAS DISTRIBUTION PRODUCTS STEEL SERVICE TEES CONTINENTAL INDUSTRIES ABOUT US THE ULTIMATE CONNECTION Our Company Continental Industries, headquartered in Tulsa, Oklahoma, was formed in 1958 and is today
More informationWorking Pressure - Hose Ends
Working Pressure - Hose Ends The maximum dynamic working pressure of a hose assembly is the lesser of the rated working pressure of the hose and the end connection used. HIGH SPECIALTY HOSE ACCESSORRIES
More informationPipe Valves, Fittings and Nipples Pressures to 15,200 psi
Pipe Valves, Fittings and Nipples MAXIMATOR has been designing and manufacturing high pressure equipment for more than thirty years and has a worldwide reputation for quality and reliability, backed by
More informationPower Cube Open Source Ecology Page 1. Power Cube. Version 4
Power Cube Open Source Ecology Page 1 Power Cube Version 4 Power Cube Open Source Ecology Page 2 Contents Table of Contents Power Cube... 1 Contents...2 Introduction... 3 Bill Of Materials...4 Discrete
More informationFlare Fittings. The World Standard. SAE 45 Flared Fittings... D4. Inverted Flared Fittings... D14. Access Valves... D18
Flare Fittings SAE 45 Flared Fittings... 4 Inverted Flared Fittings... 14 Access Valves... 18 The World Standard Flare Fittings Flare to ale PT 48F ale Connector 481FH ale Connector AVU1 ale Connector
More informationThread and End Connection
www.swagelok.com and End Connection Identification Guide 2 Contents Introduction and End Connection Terminology.. 4 General Terminology... 5 Step-by-Step Identification Procedure for s and End Connections...
More informationPipe threads for tubes and fittings where pressure-tight joints are not made on the threads. (requires PTFE sealing tape or liquid sealant).
Fittings for CO 2 Pipe Threads Pipe thread references quoted in this catalogue conform with the requirements specified in the latest issue and amendments of the following ISO Standards: ISO 7-1 (BS21)
More informationTransport & Automotive CATALOGUE. March 2011. Customer Service Phone: 1800 777 299 Fax: 1800 065 321 Email:sales@tubefit.com.au. www.tubefit.com.
Transport & Automotive CATALOGUE Customer Service Phone: 1800 777 299 Fax: 1800 065 321 Email:sales@tubefit.com.au March 2011 www.tubefit.com.au Page 1 4 6 9 12 14 16 17 19 20 22 23 24 26 28 29 31 33 Index
More informationUSER MANUAL. 10 GPM Small Single Line Cryogenic Coupling
JC Carter LLC LNG Couplings USER MANUAL 10 GPM Small Single Line Cryogenic Coupling Models 50E722 Nozzle and 50E721 Receptacle User s Manual and Installation Guide! Warning: Read the User s Manual and
More informationHose Clamps & Fittings
All Stainless Steel Marine or Underground Hose Clamps 5/16 HEX HEAD SCREW 60000 SERIES Highly corrosion resistant Use for marine or underground applications Stainless Steel Band, Housing Plated Steel Screw
More informationThese features have made Lo Torc valves the choice of high pressure plug value users, worldwide:
LO TORC Plug Valve The high value, dependable performance, and low maintenance requirements of Halliburton Lo Torc valves can help reduce overall operating costs and help cut downtime. These features have
More informationSeries M Applicable Tubing: ø2 Connection Thread: M3, M5
iniature Fittings Series pplicable Tubing: ø2 onnection Thread:, RoHS ade to Order (Refer to page for details.) pplicable O.D. x I.D.: ø2 x ø.2 onnection thread: / One-touch fitting size: ø.2 / ø Tubing
More information1998½-2007 Dodge Ram 5.9L Cummins
9 January 2014 1081130-33 Dodge Cummins Low Fuel Pressure Alarm Light Kit (I-00143) 1 1998½-2007 Dodge Ram 5.9L Cummins LOW FUEL PRESSURE ALARM LIGHT - Installation Manual - Part Number Sequence: 1081130
More informationCharts (Section XI) www.accordintl.com Ph. (713) 641-2288 Fax (713) 641-3636 Main PAGE #
Charts (Section XI) Part No. Description Page No. Fraction, Decimal, and Millimeter Conversion Chart 2 Measurement Chart (Metric & Standard) 3 Standard (ANSI B16.5) Flange Dimension Chart 4 Metric Flange
More information3. SEISCO PARTS & SERVICE REMOVAL AND REPAIR GUIDE
4 3. SEISCO PARTS & SERVICE REMOVAL AND REPAIR GUIDE A. Changing the Control Board B. Replacing a Heating Element C. Thermistor Replacement D. High Limit Switch Replacement E. Level Detector Replacement
More informationFITTINGS 5-01. 82A series Aluminium (light weight) compression fittings Ø 6... 42 mm tube size, BSPP and BSPT thread
FITTINS 82 series luminium (light weight) compression fittings Ø 6... 42 mm tube size, SPP and SPT thread 82 series rass compression fittings Ø 6... 42 mm tube size, SPP and SPT thread 83 series luminium
More informationMODEL G300 BRAKE BLEEDER
MODEL G300 BRAKE BLEEDER Installation, Operation & Repair Parts Information Branick Industries, Inc. 4245 Main Avenue P.O. Box 1937 Fargo, North Dakota 58103 REV060616 P/N: 81-0035G 1 THIS PAGE INTENTIONALLY
More informationCAST IRON THE BASICS. Heatline - Cast Iron Radiators SMOOTH FLAT FILE TO REMOVE ANY SWARF. ONE TIME. ASSEMBLY. JOINTS SHOULD BE TIGHTENED.
CAST IRON THE BASICS 1. DO NOT LIFT ON YOUR OWN. 2. ONLY LIFT THE RADIATOR VERTICALLY. 3. DO NOT LIFT MORE THAN 8/10 SECTIONS AT ANY ONE TIME. 4. POSITION THE RADIATOR BEFORE FINAL ASSEMBLY. 5. THIS PRODUCT
More informationPowers Controls TH 192 HC Heating/Cooling Room Thermostat
Powers Controls TH 192 HC Heating/Cooling Room Thermostat Technical Instructions Document No. 155-066P25 TH 192-2 50 60 70 80 70 TH0356R1 60 80 POWERS Description The TH 192 HC thermostats are proportional
More informationBlock and Bleed Gauge Valves M25 and M251
Product Overview The M25 and M251 are two-valve single outlet gauge valves that combine isolating, calibrating, and venting facilities in a single compact unit. These valves enable gauges, pressure transmitters,
More information*Rated to 207 Bar/3000 PSI with Aluminum Body. Catalog HY15-3501/US SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO.
Bodies & Contents SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO. /GPM BAR/PSI STANDARD CHECKS D1A6... 2U... Valve Insert, Ball Type...145/38... 42/6... 5 D1B125... 2C... Valve Insert, Ball Type... 5/132...
More informationBETTIS CONVERSION INSTRUCTIONS TO CONVERT HD SERIES ACTUATORS TO HD-M3, HD-SR-M3 HD-M3HW OR HD-SR-M3HW SERIES PNEUMATIC ACTUATORS
BETTIS CONVERSION INSTRUCTIONS TO CONVERT HD SERIES ACTUATORS TO HD-M3, HD-SR-M3 HD-M3HW OR HD-SR-M3HW SERIES PNEUMATIC ACTUATORS PART NUMBER: 132581 REVISION: A RELEASE DATE: 24 March 2000 Page 1 of 10
More informationSERIES ASM NEOPRENE/EPMD FLANGED SINGLE SPHERE CONNECTOR CONNECTORS. Pressures to 225 PSIG (15.51 barg) Temperatures to 230ºF (110ºC)
APPLICATIONS Process Industry Weak Acids Alkalies Compressed Air Pulp & Paper MODELS ASM - Flanged Connection OPTIONS Control Rods Oil & Gas Water & Waste Pump suction & discharge Sea water Chemical lines
More informationChar-Lynn Spool Valve Hydraulic Motors. Repair Information. W Series Geroler Motors
Char-Lynn Spool Valve Hydraulic Motors Repair Information W Series Geroler Motors with Parking Brake 004 Nut Key Ring, Retaining Bearing Ring, Retaining Ring, Retaining Washer (Thick), Pressure Washer,
More informationSubmersion/Insertion Toroidal Sensor
Instruction Sheet PN 51A-228/rev.P December 2010 Model 228 Submersion/Insertion Toroidal Sensor For additional information, please visit our website at www.emersonprocess.com/raihome/liquid/. CAUTION SENSOR/PROCESS
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Application Outboards Faria 5 Gauge Set* Publication No. Description Part Number Honda Code PII53606A White faced, flat lens 06300-ZW5-010ZB 6315410 Issue Date Black faced, flat
More informationAMERICAN Mechanical Joint Pipe For Water, Sewage or Other Liquids
AMERICAN Mechanical Joint Pipe For Water, Sewage or Other Liquids The AMERICAN Mechanical Joint was developed by the American Cast Iron Pipe Company and first marketed in 1929. Since that time, millions
More informationChief S21M PARTS MANUAL. 2005 Chief Automotive Technologies
Chief SM 00 Chief Automotive Technologies Chief s Limited One-Year Warranty & Liability CHIEF'S LIMITED ONE-YEAR WARRANTY & LIABILITY Chief Automotive Technologies, Inc. warrants for one year from date
More informationwith installation dynafact boost GAUGE this manual is for use with systems 64050-64054
owners manual with installation instructions dynafact boost GAUGE this manual is for use with systems 64050-64054 GENERAL INSTALLATION PRACTICES This manual is an installation guide for all 1. Banks DynaFact
More informationFittings, Tubing & Nipples
s, Tubing & Nipples P Series Pipe s s to 15,000 psi (1034 bar) Since 1945 Parker utoclave Engineers has designed and built premium quality valves, fittings and tubing. This commitment to engineering and
More informationPowers Controls Free Energy Band TH 193 HC Heating/Cooling Room Thermostat
Document No. 155-068P25 TH 193-4 Powers Controls Free Energy Band TH 193 HC Heating/Cooling Room Thermostat 50 60 70 80 70 TH0356R1 60 80 POWERS Description The TH 193 HC thermostats are proportional dual
More informationTWO-WAY DIVERTER WITH THREE-WAY HAND SHOWER
TWO-WAY DIVERTER WITH THREE-WAY HAND SHOWER 1. BEFORE YOU BEGIN A. HOW TO USE THESE INSTRUCTIONS Please read these instructions carefully to familiarize yourself with the required tools, materials, and
More informationPipe Cutting and Beveling Clamshells
Pipe Cutting and Beveling Clamshells Who We Are One Company, Total Support, Complete Solutions For more than a century, Hydratight has provided world-class bolted joint solutions and continues to set international
More informationHigh Pressure Equipment High Pressure Valves, Fittings and Tubing
igh quipment igh Valves, ittings and Tubing 0,000, 40,000 and psi service igh quipment Company has developed a line of igh products to assure safe and easy plumbing for 0,000, 40,000 and psi. These needle
More informationRound Housing with Side Ports
Power Steering Steering Control Unit (SCU) Parts and Repair Information 5 Series Steering Control Units 001 Square Housing with Side Ports Round Housing with Side Ports T E L RP Round Housing with End
More informationPowers Controls TH 192 S Single Temperature Room Thermostat
Technical Instructions Document No. 155-065P25 TH 192-1 Powers Controls TH 192 S Single Temperature Room Thermostat 50 60 70 80 TH0355R1 70 80 POWERS Description The TH 192 S thermostats are proportional
More informationGEET Fuel Processor Plans
GEET Fuel Processor Plans This is a greatly simplified Proof of Concept version of the GEET Fuel Processor that just about anyone can build from parts from a local Hardware store in a weekend for very
More informationSUPERCHIPPER CASTING MAINTENANCE
INTRODUCTION By design, the Superchipper Rotor is clad in castings which wear during crushing. The castings wear at different rates depending on their location on the rotor, material feed rate, material
More informationLIST PRICE BOOK MALLEABLE CAST IRON PRESS FITTINGS FOR SCH. 10 40 BLACK & GALVANIZED STEEL PIPE
FASTLOCK fittings are not currently approved for use with gas or fire protection applications. FITTINGS FOR STEEL PIPE LIST PRICE BOOK MALLEABLE CAST IRON FITTINGS FOR SCH. 10 40 BLACK & GALVANIZED STEEL
More informationProduct Manual. CVS Type 67AFR Filter Regulator. Introduction. Installation. Description
Product Manual CVS Type 67AFR Filter Regulator Introduction This CVS Controls product manual includes instructions for the installation, adjustment, maintenance and parts ordering of the CVS Type 67AFR
More informationInstallation Instructions
Installation Instructions S50-310 (Semi-Circular) S50-311 (Circular) Accu-Zone Infrared Control Conversion Kit for Terrazzo & Stainless Steel Classic Washfountains (Non-sectional) Table of Contents Pre-Installation
More informationAmerican SAE J531 Taper Thread Pipe Plugs and Drain Plugs
PIPE PLUGS & DRAIN PLUGS CATALOG American ASME B16.11 Standard Taper Thread Pipe Plugs American ASME/ANSI B16.14 Standard Taper Thread Pipe Plugs American SAE J531 Taper Thread Pipe Plugs and Drain Plugs
More informationJames M. Pleasants Company
James M. Pleasants Company SUBMITTAL DATA GAINESVILLE MECHANICAL DECEMBER 20, 2013 PROJECT: GSU: J-183 HUMANITIES LAW BLDG. QUOTE NO:12116 ENGINEER: STEVENS & WILKINSON GASKETED PLATE HEAT EXCHANGER Tag:
More informationArecont Vision H.264 Color or Day/Night SurroundVideo Series Installation Manual
0 P a g e H.264 Color or Day/Night SurroundVideo Installation Manual Inside the box: A. Arecont Vision SurroundVideo camera B. Mounting template C. RJ45 female to female coupler D. Hex key E. Security
More informationYour safety and the safety of others are very important.
NATURAL GAS TO PROPANE CONVERSION KIT 090 INSTALLATION INSTRUCTIONS FOR ALTITUDES 0 -,00 FT. ONLY PROPANE CONVERSION KIT SAFETY... INSTALLATION REQUIREMENTS... Tools and Parts... LP Gas Requirements...
More informationEasy Tool Retracting System CMC-SR2159ER36
Easy Tool Retracting System CMC-SR2159ER36 Pepperl+Fuchs, Inc. 1600 Enterprise Parkway Twinsburg, Ohio 44087 Phone: +1 330 486 0002 e-mail: pa-info@us.pepperl-fuchs.com Mounting the Easy Tool Refer to
More information*Rated to 207 Bar/3000 PSI with Aluminum Body. Denotes New Winner s Circle Product Line. Catalog HY15-3502/US
Bodies & Contents SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO. LPM/GPM BAR/PSI STANDARD CHECKS D1A6... 2U... Valve Insert, Ball Type...145/38... 42/6... 5 D1B125... 2C... Valve Insert, Ball Type...
More informationPRODUCT CATALOGUE. burnettandhillman.co.uk &HYDRAULIC ADAPTORS. Burnett & Hillman Havyat Road, Wrington, Bristol BS40 5AE United Kingdom
burnettandhillman.co.uk 2014 HYDRAULIC ADAPTORS Burnett Hillman Havyat Road, Wrington, Bristol BS40 5AE United Kingdom PRODUCT CATALOGUE T: +44 (0)1934 862596 F: +44 (0)1934 862616 E: sales@burnettandhillman.co.uk
More informationModel KFR56 Series Quick Response Standard Spray
Bulletin 036 Model KFR56 Series Quick Response Standard Spray Bulletin 036 Model KFR56 Sprinkler Types Standard Upright Standard Pendent Horizontal Sidewall Model KFR56 Sprinkler Types Pendent F1/F2/FP
More informationMakes bends greater than 90 in a single operation
TurnPro Tools TurnPro Indexing Tube Bender TurnPro HTB Indexing Handle Tube Bender Makes bends greater than 90 in a single operation Eliminates crossed handles Noassembly andreassembly ofbenderhandles
More informationH1 Axial Piston Pump, Size 078, Single Technical Information Dimensions
Input Shafts Option G1, ISO 3019-1, outer dia 32 mm-4 (SAE C, 14 teeth) 31.5 ±1 [1.240 ±0.039] MOUNTING FLANGE SURFACE FLANGE 127-4 PER ISO 3019-1 SPLINE DATA NUMBER OF TEETH : 14 PITCH FRACTION : 12/24
More informationChar-Lynn Hydraulic Motor. Repair Information. 10 000 Series. October, 1997
Char-Lynn Hydraulic Motor October, 1997 Repair Information Geroler Motor Two Speed 001 27 Retainer inside bore of valve plate bearingless motors only 4 15 16 3 6 35 Parts Drawing 25 2 2 1 19 17 36 40 47
More informationAMPSEAL* Automotive Plug Connector and Header Assembly
AMPSEAL* Automotive Plug Connector and Header Assembly Application Specification 24 SEP 97 Rev E All dimensions are given in millimeters unless otherwise specified. All dimensional tolerances are +0.2
More informationML11428-70 (Click to View Entire Section PDF File No Links MR70-MR70Z) GENERAL ORDER PAGE for - "Miscellaneous Items"
ORDER PAGE Harnesses Pigtails Fittings Fuse Holders & Fuse Kits Miscellaneous Repair Kits Buzzers & Chimes Transmission Neutral Park Switch Detectors Band Clamps Oil for Hydraulic Systems HWH PARTS MANUAL
More informationTrouble shooting guide
guide DPR/PSR Leak Insuffi ciently tightened, shallow bite Tighten the nut according to correct number of turns, direct assembly only for maintanance/repair, use of recommended pre-assembly machines Mark
More informationVOYAGER 570G. 744A Sprayer Control
VOYAGER 570G 744A Sprayer Control U S E R M A N U A L U S E R M A N U A L Table of Contents CHAPTER 1 - INTRODUCTION...1 SYSTEM CONFIGURATIONS...1 KIT CONTENTS...3 CONTROL HOUSING ASSEMBLY...5 CHAPTER
More informationESFR DRY PENDENT SPRINKLER VK502 (K14.0) TECHNICAL DATA
December 19, 2013 Sprinkler 122j 1. DESCRIPTION Viking Early Suppression Fast Response (ESFR) Dry Pendent Sprinkler VK502 is a fast response fusible element type sprinkler designed for use in storage areas
More informationMini USB and USB 2.0-IP67 Connector System
Mini USB and USB 2.0-IP67 Connector System Section 12 Mini USB and USB 2.0-IP67 Connector System CONEC has added the Mini-USB connector. This Mini-USB IP67 receptacle and plug family, feature a bayonet
More information300 SERIES 331, 332, 333, 344, 356 AND 367 MODELS
Section: MOYNO 500 PUMPS Page: 1 of 8 Date: March 1, 1998 SERVICE MANUAL MOYNO 500 PUMPS 300 SERIES 331, 332, 333, 344, 356 AND 367 MODELS Mechanical Seal Models Packing Gland Models MODELS DESIGN FEATURES
More informationTITAN Fuel Tanks. INSTALLATION INSTRUCTIONS G e n e r a t i o n V
TITAN pt. no.: 02 0000 0143 Important: Please read these instructions carefully and completely before starting the installation. TITAN Fuel Tanks INSTALLATION INSTRUCTIONS G e n e r a t i o n V Extended
More informationInstallation, Operation and Maintenance Manual for Pilot Operated Valves
Installation, Operation and Maintenance Manual for Pilot Operated Valves Models 1400, 1420, 1430, 1460 IOM1400.0 January 2, 2014 REV A 12393 REF. ID 98136 IOM1400.0 REV. A 12541 TABLE OF CONTENTS DESCRIPTION
More informationSECTION 33 11 00.15 DUCTILE IRON PIPE AND FITTINGS
SECTION 33 11 00.15 DUCTILE IRON PIPE AND FITTINGS PART 1: GENERAL 1.01 COORDINATION OF WORK Connection to existing pipelines may require shutdown of AW facilities. Closely coordinate construction work
More informationSprinkler Identification Number. Page 1 of 6 MARCH 2014 TFP288. Worldwide Contacts. www.tyco-fire.com
Worldwide Contacts www.tyco-fire.com Model EC-HS 80 K-factor, Quick Response Extended Coverage Horizontal Sidewall Sprinklers Installations per VdS CEA 400, Annex E, LH/OH General Description The Model
More informationStructural Bolting. Notice the Grade 5 has a much smaller head configuration and a shorter shank then the A325 structural bolt. Rev.
Structural Bolting ASTM A325 and ASTM A490 are the two U.S. standard structural bolts. When looking at the mechanical requirements of bolts it appears that an ASTM A325 and SAE J429 Grade 5 are identical
More informationUniversal Adjustable Fuel Pressure Regulator
Universal Adjustable Fuel Pressure Regulator Installation Instructions for: Part Numbers 25-302 U.S. Patent # 6,298,828! Due WARNING: to the fact that this installation deals with your fuel system this
More informationDirect Operated Regulator for 6.0 MPa (Relieving Type) How to Order. Body size 30 40
Direct Operated Regulator for (Relieving Type) Series Service life: 0 million cycles Using NSF-H-certified grease on the guide ring (sliding) part. Improved durability under a high environment with a polyurethane
More informationCatalog HY15-3501/US SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO. LPM/GPM BAR/PSI
Bodies & Contents SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO. LPM/GPM BAR/PSI KSWA3... SW-3... Ball sert Type...9./2.... 42/6... 3 K2A... 3Z... Poppet sert Type...38/1... 3/... 4 CS41B... C4-3...
More informationMany Products...One Source
PRESSURE GAUGES Dedicated Sales Rep for Your Area 97%Fill Rate Shipping within 24 Hours State of the Art Warehouse System Technical Support Quality Control Program 25 Whaley Avenue Milverton, Ontario N0K
More informationTwo most common lock nut groups: 1-Prevailing Torque Type Lock Nuts:
Two most common lock nut groups: 1. PREVAILING TORQUE a design feature of the lock nut produces friction between threads of mated components thereby increasing the force needed to tighten as well as loosen
More informationStyle 07 Zero Flex Rigid Coupling. Style 75 Flexible Coupling. Style 77 Flexible Coupling 11. Description
Style 07 Zero Flex Rigid Coupling The unique angled pad design adjusts to standard pipe tolerances to positively clamp the pipe to resist flexural and torsional loads. Working pressures are based on standard
More information3", 4", 6" & 8" Model H Series Alarm Check Valve Installation and Maintenance Guide
", ", " & " Model H Series Alarm Check Valve Installation and Maintenance Guide 077 AIRPARK DRIVE STANDISH, MICHIGAN PHONE 99-- 00-2-0 FAX 99--92 www.globesprinkler.com OCTOBER 2 C- BULLETIN A.C.V.I.M.,
More informationVickers. Check Valves. Check Valves. Inline, right angle, manifold mounted, and pilot operated designs. Released 9/93
Vickers Check Valves Check Valves Inline, right angle, manifold mounted, and pilot operated designs Released 9/93 645 Introduction Vickers inline, right-angle, and manifold mounted check valves are direct
More informationEliminator Vented Disc Brake Owners Manual
Eliminator Vented Disc Brake Owners Manual Eliminator Vented Disc Brakes Exclusive Features Whenever possible, the tendency is to use an aluminum alloy in order to reduce weight. These alloys are much
More informationGrade Level Spill Containment Manholes
Grade Level Spill Containment Manholes Installation Instructions 705-5 Gallon 715-15 Gallon 725-25 Gallon Manual # Revision Date Changes from Previous Revision F-1307 7 Mar. 2012 Removed reference to pipe
More informationSeries TY-FRB 2.8, 4.2, 5.6, and 8.0 K-Factor Upright, Pendent, and Recessed Pendent Sprinklers Quick Response, Standard Coverage General Description
Worldwide Contacts www.tyco-fire.com Series 2.8,.2,.6, 8.0 K-Factor Upright, Pendent, Recessed Pendent Sprinklers Quick Response, Stard Coverage General Description The TYCO Series, 2.8,.2,.6, 8.0 K-factor,
More informationKiosk Group, Inc. ASSEMBLY INSTRUCTIONS FOR THE STANDALONE. EXQUISITE ipad KIOSK. For ipad 2-3-4-5 Version Tablets.
Kiosk Group, Inc. ASSEMBLY INSTRUCTIONS FOR THE STANDALONE EXQUISITE ipad KIOSK For ipad 2-3-4-5 Version Tablets ipad 2-3-4-5 Version Tablet Items Required: ipad data/power cable that came with your ipad.
More informationNITROUS TRANSFER PUMP INSTRUCTIONS
NITROUS TRANSFER PUMP INSTRUCTIONS SAFETY TIPS Never directly inhale nitrous oxide. When inhaled in large quantities, nitrous oxide can cause respiratory ailments or in extreme cases, death by suffocation.
More informationSelect Radiators Installation Guide
Select Radiators Installation Guide Table of Contents Informational Symbols...3 Before You Begin...4 Select Rough-In... 5 Connection Installation...6 Optional Piping Arrangements...7 Conventional Wall
More informationComplete Systems & Parts Automatic Oiler & Grease Bank
MADE IN THE USA Complete Systems & Parts Automatic Oiler & Grease Bank www.gosuburban.com 2 Lubrication Systems Lubrication Systems, a division of Suburban Manufacturing, manufactures a complete line of
More informationNewloc Acetal. Plastic Push-to-Connect Fittings. Fluid Transfer Specialists
Newloc Acetal Plastic Push-to-Connect Fittings Fluid Transfer Specialists Newloc Acetal Extremely easy to install no tools necessary Certified by the National Sanitation Foundation (NSF-1 and NSF-1) Instant
More informationTri-Homo Style Operation and Maintenance Instructions
Tri-Homo Style Operation and Maintenance Instructions One Research Drive Stratford, CT 06615 (203) 375-0063 www.sonicmixing.com 1 Installation and Start-up Do not perform following adjustments without
More informationFor exploded diagram and part number information, refer to the Spare Parts Catalog available on our website at www.rockshox.com.
For exploded diagram and part number information, refer to the Spare Parts Catalog available on our website at www.rockshox.com. 2 0 0 5 D U K E A I R X C / S L / R A C E S E R V I C E G U I D E Information
More informationSprinkler Identification Numbers
Worldwide Contacts www.tyco-fire.com Series TY-FRB 5.6 K-factor Horizontal Quick Response, Standard Coverage General Description described in this data sheet are quick response -standard coverage, decorative
More informationINSTRUCTIONS AND PARTS LIST FOR MODEL 70H & 75H HAND-OPERATED HYDRAULIC PRESS
INSTRUCTIONS AND PARTS LIST FOR MODEL 70H & 75H HAND-OPERATED HYDRAULIC PRESS SETTING UP THE PRESS FOR OPERATION For shipping convenience, the gauge, pump handle, hoist crank, screw nose and base angles
More informationInstaller s Guide 18-AH39D1-13
18-AH39D1-13 Cased Aluminum "Convertible" Coils 4TXCA018BC3HC** 4TXCA024BC3HC** 4TXCB025BC3HC** 4TXCB026BC3HC** 4TXCB031BC3HC** 4TXCB032BC3HC** ALL phases of this installation must comply with NATIONAL,
More informationScrew Thread Design. Rev. 3-4-09
Screw Thread Design Screw Thread Fundamentals A screw thread is defined as a ridge of uniform section in the form of a helix on either the external or internal surface of a cylinder. Internal threads refer
More informationTech Bulletin. Hose / Cord Replacement and Required Wraps. Series RT
Tech Bulletin Hose / Cord Replacement and Required Wraps Series RT Replacing the Hose To remove the hose - Pull out the hose leaving 2 to 3 feet on the spool. Engage the latch pawl. Remove the U-bolt nuts
More informationPipe Flange Bolting Guide Aztec Bolting Services, Inc.
Pipe Flange Bolting Guide Aztec Bolting Services, Inc. 1. Introduction: In the quest to eliminate leaks in piping and pressure vessel systems, it is necessary to first develop an understanding of the mechanisms
More informationInstallation Instructions for Water Methanol Stage 1
Installation Instructions for Water Methanol Stage 1 Installation- Mechanical Step 1 Reservoir Install Install 1/8 NPT ¼ OD elbow into 3/8-1/8 NPT reducer bushing using GOOP sealant (Right). Install this
More informationUniversal Installation and Maintenance Instructions Double Wall Spill Containment Bucket (5 and 15 gal)
Universal Installation and Maintenance Instructions Double Wall Spill Containment Bucket (5 and 15 gal) IMPORTANT: It is imperative that the user read these warnings and use of the assembly instructions
More informationMueller B-101 and A-3 Drilling and Tapping Machines
TM TM Mueller and Drilling and Tapping Machines A guide to selecting Mueller Equipment Mueller TM TM and Drilling and Tapping Machines When it comes to line stopping and drilling and tapping technology
More informationOHIO MEDICAL CORPORATION. Medical Gas Panel. Installation and Maintenance Manual
OHIO MEDICAL CORPORATION Medical Gas Panel Installation and Maintenance Manual P/N 255105 (Rev.5) 08/2005 P/N 255105 (Rev.5) 08/2005 PAGE 2 OHIO MEDICAL CORPORATION PAGE 3 1.0 User Responsibilities The
More informationInstallation Instructions 4508 4508S
SYMPHONY Spread Lavatory Faucet with Speed Connect Drain Congratulations on purchasing your American Standard faucet with Speed Connect drain, a feature found only on American Standard faucets. Speed Connect
More informationBlack Wolf POCKET BILLIARD TABLE INSTALLATION MANUAL. SERVICE DEPARTMENT P.O. BOX 68 BRISTOL, WI 53104
Black Wolf TM POCKET BILLIARD TABLE INSTALLATION MANUAL www.brunswickbilliards.com SERVICE DEPARTMENT P.O. BOX 68 BRISTOL, WI 53104 51-905710-000 SEPTEMBER 2010 NOTE: Please use the instructions in this
More informationStep-by-step instructions:
Spark plug thread repair for Ford Triton cylinder heads Step-by-step instructions: Identification Installation Verification Specifically designed and tested for 4.6L, 5.4L, and 6.8L 2 and 4 valve heads,
More information