Signal Relays AXICOM. IM Relay
|
|
|
- Roderick Reeves
- 9 years ago
- Views:
Transcription
1 Signal s IM n Slim line 0x6mm, low prile 5.65mm and min. board-space 60mm n Switching current /5A, switching power 60/6.5VA and switching voltage 0VDC/50VAC n Low coil power consumption, 40m standard, 00m high sensitive, 50m ultra high sensitive and 00m bistable n High dielectric and surge capability up 500Vrms between open contacts and 500Vrms between coil and contacts n High mechanical shock resistance up 50g functional IM_ Typical applications Telecommunication, access and mission equipment, optical network terminals, modems, fice and business equipment, consumer electronics, measurement and test equipment, industrial control, medical equipment, HVAC Approvals UL 508 File No. E 44 Technical data approved types on request Contact Data standard, C D, I P standard and high high contact high dielectric current stability Contact arrangement m C, CO Max. switching voltage 0VDC, 0VDC, 0VDC, 50VAC 50VAC 50VAC Rated current A 5A A Limiting continuous current A 5A A Switching power 60, 6.5VA Contact material PdRu AgNi PdRu +Au +Au +Au covered covered covered Contact style twin cont. twin cont. twin cont. I: single contacts Minimum switching voltage 00µV Initial contact resistance <50mΩ at 0mA/0mV I: < 00mΩ Thermoelectric potential <0µV Operate time typ. ms, max. ms Release time without diode in parallel typ. ms, max. ms with diode in parallel typ. ms, max. 5ms Bounce time max. typ. ms, max. 5ms Max. DC load breaking capacity DC Voltage [Vdc] DC current [A] resistive load Contact Data (continued) Electrical endurance at contact application 0 ( 0mV/ 0mA) cable load open end resistive, 5VDC / 0.4A - 0 resistive, 0 VDC / 0.7A - 60 resistive, 50VAC / 0.5A - 6.5VA resistive, 0VDC / A - 0 resistive, 0VDC / A - 60 UL contact rating Mechanical endurance Coil Data Magnetic system Coil voltage range min..5x0 6 operations min..0x0 6 operations min. 5x0 5 operations min. x0 5 operations min. x0 5 operations min. 5x0 5 operations min. x0 5 operations 0VDC, A, 60, NO only 0VDC, 0.A, 0VDC, 0.7A, 60 5VAC, 0.5A, VAC, 0.5A, operations monostable, bistable.5 4VDC Coil s, standard, monostable, coil Coil Rated Operate Release Coil Rated coil code voltage voltage voltage resistance power VDC VDC VDC Ω±0% m All figures are given coil without pre-energization, at ambient temperature + C Coil operating range, standard Coil Voltage [U/Unom] Umax. at xa Umax. at xa Unom. nominal coil voltage Urel. min. 40m coil 00m coil U Corporation, only ger with Definitions section. Datasheets and product data is terms disclaimer and all chapters Definitions section, available at Ambient Temperature [ C]
2 Signal s IM (Continued) Dimensions ÊSignalÊs IM Pole Changeo Coil Data (continued) Coil s, sensitive, monostable, coil L Coil Rated Operate Release Coil Rated coil code voltage voltage voltage resistance power H VDC VDC VDC Ω±0% m T T D Coil s, ultra high sensitive, monostable, coil S Coil Rated Operate Release Coil Rated coil code voltage voltage voltage resistance power VDC VDC VDC Ω±0% m All figures are given coil without pre-energization, at ambient temperature + C Coil operating range, sensitive and ultra high sensitive coil Coil Voltage [U/Unom] Unom. nominal coil voltage Corporation, Umax. at xa Umax. at xa Uop min. Urel. min. 50m coil 00m coil only ger with Definitions section. IMÊTHT IMÊTHT Insulation Data standard* C* D,P, I mm inch mm inch mm standard, high high current, 0.00ʱ sensitive, dielectric high contact 6.00Ê±Ê Ê±Ê Ê±Ê0.0 ÊÊ6.00Ê 5.65ÊÐÊ0.0 ultra high stability ÊÊ5.65Ê sensitive 7.50Ê±Ê Initial dielectric strength 0Ê±Ê Ê±Ê between open contacts 000V rms 500V rms 750V rms 0Ê±Ê between contact and coil 800V rms 800V rms 500V rms.0ê±ê between 0 adjacent contacts 000V rms 800V rms 750V rms Initial surge withstand voltage 0.09 between open contacts 500V 500V 000V between contact and coil 500V 500V 000V between adjacent contacts 500V 500V 000V Initial insulation resistance between insulated elements >0 9 Ω >0 9 Ω >0 9 Ω Capacitance between open contacts max. pf between contact and coil max. pf between adjacent contacts max. p RF Data Isolation at 00MHz/900MHz 7.0dB/8.8dB Insertion loss at 00MHz/900MHz 0.0dB/0.dB Voltage standing wave ratio (VSR) at 00MHz/900MHz.06/ Ambient Temperature [ C] Or Data Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content Coil s, standard, bistable coil refer Product Compliance Support Center at Coil Rated Set Reset Coil Rated coil /cusmersupport/rohssupportcenter code voltage voltage voltage resistance power Ambient temperature -40 C +85 C VDC VDC VDC Ω±0% m Thermal resistance <50K/ Category environmental protection IEC 680 RT V - hermetically sealed Vibration resistance (functional) 0g, 0 500Hz Shock resistance (functional), half sinus ms 50g Shock resistance (destructive), half sinus 0.5ms 500g position any eight max. g Resistance soldering heat IEC All figures are given coil without pre-energization, at ambient temperature + C Moisture sensitive level, JEDEC J-Std-00D MSL Coil operating range, bistable coil related only relays packed in orginal dry-packs Coil Voltage [U/Unom] Umax. - 00% coil duty at 0A (00m) Umax. - 00% coil duty at 0A (00m) Unom. nominal coil voltage Ambient Temperature [ C] Umax. - 5%coil duty at xa (00m) Uset min. 00 m 00 m Umax.-5%coil duty at 0A(00m) Umax.-5%coil duty at 0A (00m) Umax. -5% coil duty at xa (00m) THT *this relay contains SF6 (Sulfur hexafluoride, CAS number: ) dielectric strength enhancement, SF6 is hermetically sealed in relay without leaks air during normal application as recommended per applicable product specification. It is clarified that usage SF6 in mini signal relay is not prohibited by related regulations. Please contact TE local sales or field engineer furr inmation and detailed material declaration. Ultrasonic cleaning Packaging/unit THT assignment TOP relay Monostable rest Non- not not recommended tube/50pcs., box/000 pcs. reel/000 pcs., box/000 or 5000 pcs. Bistable, coil o ±0. Contacts are shown in. Contact position might change during portation and must be bee use. Copla i m use. Datasheets and product data is Datasheets, product data, Definitions section, terms disclaimer and all chapters Definitions section, available at 0.
3 T TT LLT L T T 6.00Ê±Ê Ê±Ê Ê±Ê Ê±Ê Ê±Ê Ê±Ê Ê±Ê Ê±Ê Ê±Ê Ê±Ê Ê±Ê0.08 0Ê±Ê Ê±Ê0.08 0ʱÊ0.0 0ʱÊ0.0 0ʱÊ0.0 HH 5.65ÊÐÊ0.0 H 5.65ÊÐÊ ÊÐÊ ÊÐÊ0.0 ÊÊ5.65ÊÐÊ0.0 ÊÊ5.65ÊÐÊ0.0 ÊÊ5.65ÊÐÊ0.0 ÊÊ5.65ÊÐÊ0.0 ÊÊ5.65ÊÐÊ0.0 ÊÊ5.65ÊÐÊ0.0 ÊÊ5.65ÊÐÊ0.0 ÊÊ5.65ÊÐÊ0.0 TD TD TD T T 0 0 T 0 0 0ʱÊ0.0 0ʱÊ0.0 0ʱÊ0.0 S 0.09 S ʱÊ0.0 S 0.09 D D D SS S Signal s ±0.±0. ±0. ±0. layout TOP on wings J-legs Processing.8±0..8±0..8±0..8±0..8±0..8±0..8±0..8±0. J-legs ±0. ±0.±0. ±0. wings THT Dimensions THTTHT THT IM (Continued) THTTHT THT T LT H TD T S D S soldering s Recommended Recommended reflow soldering prile IEC Coil Non- Non- Non- Non- Resistance soldering heat - reflow prile IEC not not not not Non- Non- Non- Non- Coil not not not not inê inê inê inê - -- inê inê inê inê use. use. use. use All specifications All specifications use. use. use.use. Recommended soldering s Vapour phase soldering 0 40s 40 C All specifications full line: typical dotted line: process limits Temperature [ C] 80 C 0 C external preheating 00 C ced cooling Vapour phase soldering temperature/time prile (lead and housing peak temp.) Time [s] 05 Corporation, only ger with Definitions section. Datasheets and product data is terms disclaimer and all chapters Definitions section, available at
4 Signal s IM (Continued) Tub 50 r,00 Packing Tube THT 50 relays per tube, 000 relays per box Tape and reel 000 relays per reel, 000 or 5000 relays per box Tape and reel,000 relays per reel,000 or 5,000 relays per box Reel Dimension Reel Dimension Reel dimensions Tap,00,00 Reel Dimension Product code structure Typical product code IM 0 G R IM Signal s IM Series Contact arrangement Blank m C, CO Coil Coil code: please refer coil s table Permance type Blank I High current HVAC C High dielectric D High current P High contact stability s T THT - standard J - J-leg N THT - narrow G - gull wing Packing S Tube R Reel 4 05 Corporation, only ger with Definitions section. Datasheets and product data is terms disclaimer and all chapters Definitions section, available at
5 Signal s IM (Continued) Product code Arrangement Perf. type Coil Coil type Coil s Part number IM00GR m C,.5VDC Monostable gull wing IM00JR CO J-leg IM00NS contacts THT narrow IM0GR VDC gull wing IM0JR J-leg IM0NS THT narrow IM0TS THT standard IM0GR 4.5VDC gull wing IM0JR J-leg IM0NS THT narrow IM0GR 5VDC gull wing IM0JR J-leg IM0NS THT narrow IM0TS THT standard IM04GR 6VDC gull wing IM04JR J-leg IM04NS THT narrow IM05GR 9VDC gull wing IM05JR J-leg IM05NS THT narrow IM05TS THT standard IM06GR VDC gull wing IM06JR J-leg IM06NS THT narrow IM07GR 4VDC gull wing IM07JR J-leg IM07NS THT narrow IM08GR.4VDC gull wing IMGR VDC High sens IMGR 4.5VDC IMGR 5VDC IM6GR VDC IM7GR 4VDC IM7TS THT standard IMGR VDC Ultra gull wing IMTS high THT standard IMGR 4.5VDC sensitive gull wing IMTS THT standard IMGR 5VDC gull wing IMTS THT standard IM6GR VDC gull wing IM6TS THT standard IM40GR.5VDC Bistable gull wing IM40JR J-leg IM40NS THT narrow IM40TS THT standard IM4GR VDC gull wing IM4JR J-leg IM4NS THT narrow IM4TS THT standard IM4GR 4.5VDC gull wing IM4JR J-leg IM4NS THT narrow IM4TS THT standard IM4GR 5VDC gull wing IM4JR J-leg IM4NS THT narrow IM4TS THT standard IM44GR 6VDC gull wing IM44JR J-leg IM44NS THT narrow IM44TS THT standard IM45GR 9VDC gull wing IM45JR J-leg IM45NS THT narrow IM46GR VDC gull wing IM46JR J-leg IM46NS THT narrow IM46TS THT standard IM47GR 4VDC gull wing IM47JR J-leg IM47NS THT narrow IM47TS THT standard IM48GR.4VDC gull wing Corporation, only ger with Definitions section. Datasheets and product data is terms disclaimer and all chapters Definitions section, available at 5
6 Signal s IM (Continued) Product code Arrangement Perf. type Coil Coil type Coil s Part number IM0CGR m C High VDC Monostable gull wing IM0CTS CO dielectric THT standard IM0CGR contacts 4.5VDC gull wing IM0CGR 5VDC IM0CJR J-leg IM0CTS THT standard IM05CGR 9VDC gull wing IM06CGR VDC IM06CJR J-leg IM06CTS THT standard IM07CGR 4VDC gull wing IM07CTS THT standard IM7CGR High sens. gull wing IM4CGR VDC Bistable IM4CGR 4.5VDC IM4CGR 5VDC IM0DGR High 4.5VDC Monostable IM0DGR current 5VDC IM0DJR J-leg IM05DGR 9VDC gull wing IM06DGR VDC IM06DJR J-leg IM06DTS THT standard IM07DGR 4VDC gull wing IM07DJR J-leg IM07DTS THT standard IMDTS 4.5VDC U.h.sens IM4DGR VDC Bistable gull wing IM4DGR 4.5VDC IM4DNS THT narrow IM46DNS VDC IM47DJR 4VDC J-leg IM48DGR.4VDC gull wing IM49DGR VDC IM48IGR.4VDC IM49IGR VDC IM0PGR High 4.5VDC Monostable IM0PNS contact THT narrow IM0PGR stability 5VDC gull wing IM0PJR J-leg IM0PNS THT narrow IM06PGR VDC gull wing IM06PNS THT narrow IM4PGR 4.5VDC Bistable gull wing IM4PNS THT narrow IM4PGR gull wing IM46PNS VDC THT narrow Corporation, only ger with Definitions section. Datasheets and product data is terms disclaimer and all chapters Definitions section, available at
Signal Relays AXICOM. P2 Relay V23079. AXICOM Telecom-, Signal and RF Relays. P2 V23079 Relay. Coil Operating Range. Coil Data
P Relay V379 n Standard telecom relay (ringing and test access) n Slim line 5x7.5mm (.59x.95 ) n Max. switching current 5A n form C bifurcated contacts ( changeover contacts, CO) n Immersion cleanable
IM Series. AXICOM Signal and Telecom Relays
IM Series AXICOM Signal and Telecom Relays IM Relay Disclaimer While Tyco Electronics and its affiliates referenced herein have made every reasonable effort to ensure the accuracy of the information contained
FP2 Relay. The Best Relaytion
The Best Relaytion 2 pole telecom / signal relay Through Hole Type (THT) Polarized. Relay types: non-latching with1 coil latching with 1 coil latching with 2 coils Features Telecom / signal relay (dry
The Best Relaytion. Reed Relays. 108-98011 Rev. B EC-JM00-0009-03 ECOC: JM10 1. Aug. 04
The Best Relaytion Reed Relays 108-98011 Rev. B EC-JM00-0009-03 ECOC: JM10 1. Aug. 04 1 and 2 pole relays non-polarized, non-latching Features Direct coil control with TTL-signals possible Highly reliable
Reed V23100-V4 Relay. AXICOM Telecom-, Signal and RF Relays. AXICOM Telecom-, Signal and RF Relays. Reed V23100-V4 Relay
AXICOM AXICOM 108-98011 Nov. 07 Rev. C ECOC: JM10 Disclaimer While Tyco Electronics has made every reasonable effort to ensure the accuracy of the information in this datasheet, Tyco Electronics does not
AZ420 MINIATURE GENERAL PURPOSE RELAY
MINIATURE GENERAL PURPOSE RELAY FEATURES Rugged construction for high reliability Life expectancy greater than 0 million operations DC coils to 11 V Power consumption as low as 2 mw per pole available
1 POLE 5 A (CADMIUM FREE CONTACTS TYPE) NY SERIES
POWER RELAY 1 POLE 5 A (CADMIUM FREE CONTACTS TYPE) NY SERIES RoHS compliant FEATURES Ultra slim type with 5 mm thickness Good for high density mounting Low power consumption and high sensitivity Nominal
DISCONTINUED (1998) FBR46 SERIES. MINIATURE RELAY 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) RoHS compliant FEATURES
MINIATURE RELAY 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) FBR46 SERIES RoHS compliant FEATURES Miniature size About 50% smaller in volume compared with the FBR240 series used mainly in communication equipment.
40 Series - Miniature PCB/Plug-in relays 8-10 - 16 A. Features 40.31 40.51 40.52
Features 40.31 40.51 40.52 1 & 2 Pole relay range 40.31-1 Pole 10 A (3.5 mm pin pitch) 40.51-1 Pole 10 A (5 mm pin pitch) 40.52-2 Pole 8 A (5 mm pin pitch) PCB mount - direct or via PCB socket 35 mm rail
NA Series. 2 POLES - 1 to 2 A (For Signal Switching) MINIATURE RELAY FTR-K1 SERIES
FTR-K1 SERIES MINIATURE RELAY 2 POLES - 1 to 2 A (For Signal Switching) NA Series FEATURES Slim type relay for high density mounting Conforms to Telcordia specification and FCC Part 68 - Dielectric strength
4 A CAPACITY, THE VARIETY OF CONTACT ARRANGEMENTS FEATURES
4 A CAPACITY, THE VARIETY OF CONTACT ARRANEMENTS S RELAYS FEATURES 28. 1.12 12..472 1.4.49 The variety of contact arrangements 2 Form A 2 Form B, 3 Form A 1 Form B, 4 Form A Latching types available High
TQ SMD RELAYS TQ SMD LOW-PROFILE SURFACE-MOUNT RELAY FEATURES SPECIFICATIONS
LOW-PROFILE SURFACE-MOUNT RELAY RELAYS.55 5.6. FEATURES Low-profile: 6 mm.36 inch (Tape height: max. 6.5 mm.56 inch) Tape and reel package is available as standard packing style Surge withstand between
POWER RELAY. FTR-K1-KS Series. 1 POLE - 16A / Inrush 120A relay FTR-K1 SERIES FEATURES
POWER RELAY POLE - 6A / Inrush 20A relay FTR-K-KS Series FTR-K SERIES FEATURES pole 6A, form A or form C Peak inrush current 20A / TV-8 Coil power 400mW High insulation in small package (between coil and
RY2 miniature industrial relays
6 RY2 Relays of general application For plug-in sockets, 35 mm rail mount acc. to PN-EN 60715 or on panel mounting Flat insert connectors - faston x 0,5 mm Recognitions, certifications, directives: RoHS,
DISCONTINUED (2009) RA SERIES. 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) MINIATURE RELAY. RoHS compliant
MINIATURE RELAY 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) RA SERIES RoHS compliant FEATURES Ultra high sensitivity (75 to 150 mw) High reliability-bifurcated contacts Conforms to FCC rules and regulations
AXICOM Telecom-, Signal and RF Relays. Cradle Relay S V23054 / V23062. 108-98014 Nov. 07 Rev. C ECOC: JM10
Cradle Relay S V23054 / V23062 108-98014 Nov. 07 Rev. C ECOC: JM10 Disclaimer While Tyco Electronics has made every reasonable effort to ensure the accuracy of the information in this datasheet, Tyco Electronics
1 POLE - 16A / Inrush 120A relay. (a) Relay type FTR-K1 : FTR-K1 Series (b) Contact configuration A : 1 form A C : 1 form C
FTR-K1 SERIES POWER RELAY 1 POLE - 16A / Inrush 120A relay FTR-K1-KS Series FEATURES 1 pole 16A, 1 form A or 1 form C Peak inrush current 120A / TV-8 Coil power 400mW High insulation in small package (between
KSC Series Sealed Tact Switch for SMT
KSC Series Features/enefits Positive tactile feeling J or G terminations Various heights IP67 Typical Applications Automotive Cellular phones Industrial electronics Network infrastructure and IT Elevator
1 POLE - 5A SLIM POWER RELAY
POWER RELAY POLE - A SLIM POWER RELAY FTR-MY Series RoHS compliant FEATURES Width mm, height mm,(% smaller than NY series) area mm, super slim, low power, compact and light weight.gr. Nominal power: mw
1 POLE - 16A 80A Inrush type. (b) Contact configuration A : 1 form A (SPST-NO) C : 1 form C (SPDT) (standard type "K" only)
FTR-K1 SERIES POWER RELAY 1 POLE - 16A 80A Inrush type FTR-K1 Series FEATURES Peak 80A inrush current (1 form A type) Low profile (height: 15.7mm) HIGH INSULATION Insulation distance (between coil and
DATA SHEET COMPACT AND LIGHTWEIGHT, SMALL MOUNTING SIZE, HIGH BREAKDOWN VOLTAGE
DATA SHEET MINIATURE SIGNAL RELAY EC SERIES COMPACT AND LIGHTWEIGHT, SMALL MOUNTING SIZE, HIGH BREAKDOWN VOLTAGE DESCRIPTI The EC series has reduced mounting space but sustained high-performance of NEC
Features. Applications. Truth Table. Close
ASSR-8, ASSR-9 and ASSR-8 Form A, Solid State Relay (Photo MOSFET) (0V/0.A/0Ω) Data Sheet Description The ASSR-XX Series consists of an AlGaAs infrared light-emitting diode (LED) input stage optically
2 POLES 1 to 2 A (FOR SIGNAL SWITCHING)
MINIATURE RELAY 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) RY SERIES FEATURES Ultra high sensitivity UL, CSA recognized Conforms to FCC rules and regulations Part 68 Surge strength 1,500 V High dielectric
POWER RELAY. JV Series. 1 POLE - 5A/10A Medium Load Control FTR-K1 SERIES FEATURES
FTR-K1 SERIES POWER RELAY 1 POLE - 5A/10A Medium Load Control JV Series FEATURES UL, CSA, VDE, SEMKO, CQC recognized UL class B (130 C) wire class Low profile and space saving - Height: 12.5 mm - Mounting
1 POLE - 8A Medium Load Control
POWER RELAY 1 POLE - 8A Medium Load Control JS Series FEATURES UL class B (130 C) coil wire insulation 1 form A (SPST-NO) or 1 form C (SPDT) contact Low profile and space saving - Height: 12.5 mm - Mounting
DISCONTINUED (2012) VB SERIES 2 POLE 5 A (MEDIUM LOAD CONTROL) POWER RELAY. RoHS compliant
POWER RELAY 2 POLE 5 A (MEDIUM LOAD CONTROL) VB SERIES RoHS compliant FEATURES UL, CSA, VDE, SEV, SEMKO, CQC recognized TV-3 rated Working class: C UL class B (130 C) insulation Type of service: continuous
A SERIES. 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) MINIATURE RELAY. RoHS compliant
MINIATURE RELAY 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) A SERIES RoHS compliant FEATURES Extremely low profile and light weight Height: 5 mm Weight: approximately 1.2 g Meet FCC (Part 68) standard Conforms
(e) Enclosure B : Flux proof type, RTII C : Plastic sealed type (with tape), RTIII K : Plastic sealed type, RTIII
Non-promotional not for new designs FTR-K1 SERIES POWER RELAY 1 POLE - 10A VS Series FEATURES UL, CSA, VDE, SEV, SEMKO, CQC recognized TV-5 is available Working class: C UL class B (130 C) coil wire insulation
38 Series - Relay interface modules 0.1-2 - 3-5 - 6-8 A
38 Series - Relay interface modules 0.1-2 - 3-5 - 6-8 A Common features Instant ejection of relay by plastic retaining clip Integral coil indication and protection circuit EMR Electromechanical Relays
48 SERIES Relay interface modules 10 A
48 Relay interface modules 10 A 1 CO relay interface modules, mm wide Ideal interface for PLC and electronic systems Type 48.P3 1 CO 10 A s Type 48.31 1 CO 10 A s AC coils or DC sensitive coils Supply
48.12. 2 pole, 8 A Safety relay. Screw terminal. 35 mm rail (EN 60715) mounting. 2 CO (DPDT) 8/15 250/400 2,000 500 0.37 8/0.65/0.
48 Series - Relay interface modules 8 A Features 48.12 2 Pole Safety relay interface modules, 15.8 mm wide 48.12-2 Pole 8 A (screw terminal) DC sensitive coils Relay with forcibly guided contacts according
1 POLE - 16A 80A Inrush type. (a) Relay type FTR-K1 : FTR-K1-Series
FTR-K1 SERIES POWER RELAY 1 POLE - 16A 80A Inrush type FTR-K1 Series FEATURES Peak 80A inrush current (1 form A type) Low profile (height: 15.7mm) High insulation Insulation distance (between coil and
HIGH REPEATABILITY, BROADBAND TO-5 RELAYS DPDT
HIGH REPEATABILITY, BROADBAND TO-5 RELAYS DPDT SERIES RF00 RF00D RF00DD RF0 RF0D RF0DD RELAY TYPE Repeatable, RF relay Repeatable, RF relay with internal diode for coil transient suppression Repeatable,
COMPACT POWER TWIN RELAY
FTR-K1 SERIES COMPACT POWER TWIN RELAY 1 POLE x 2-25A, H-Bridge (for automotive applications) FTR-P4 Series FEATURES Compact for high density packaging High contact capacity with proven contact material
MINIATURE SURFACE MOUNT RELAY
FTR-K1 SERIES MINIATURE SURFACE MOUNT RELAY 1 POLE - 25A (For Automotive Applications) FTR-P6 Series FEATURES Surface mount relays for automotive applications Miniature size (67% of the volume of FTR-P3
SILENT POWER RELAY. FTR-H3 Series. 1 POLE - 78A/120A Inrush Current Type FTR-K1 SERIES FEATURES
FTR-K1 SERIES SILENT POWER RELAY 1 POLE - 78A/120A Inrush Current Type FTR-H3 Series FEATURES Pin compatible with widely used VS and FTR-H1 series power relays Silent relay with patented unique U-shape
Goodsky Technical Data. Contact Details
Goodsky Technical Data The following page(s) are extracted from multi-page Goodsky product catalogues or CDROMs and any page number shown is relevant to the original document. The PDF sheets here may have
49 Series - Relay interface modules 8-10 - 16 A. Features
Features 1 & 2 Pole relay interface modules 5 µm Gold plate contacts for low level switching capability 49.31-50x0-1 Pole 10 A (screw terminal) 49.52-50x0-2 Pole 8 A (screw terminal) 49.72-50x0-2 Pole
3. Terminal Shape P : PCB terminals FS: Surface-mounting terminals, short FL : Surface-mounting terminals, long
Surfacemounting Relay Ultracompact and Slim DPDT Relay Suitable for highdensity mounting.(.7 mm (W). mm (L) 9 mm (H)). Dielectric strength of, VAC and an impulse withstand voltage of 2, V for 2 μs (conforms
DISCONTINUED (1998) MINIATURE RELAY 1 POLE 1 to 2 A (FOR SIGNAL SWITCHING) FBR211 SERIES. RoHS compliant
MINIATURE RELAY POLE to 2 A (FOR SIGNAL SWITCHING) FBR2 SERIES RoHS compliant FEATURES 2 A maximum carrying current Capable of 2 A maximum continuous carrying current in the contact Superior reliability
RI-80 SMD Series Dry Reed Switch
formerly RI-80 SMD Series Dry Reed Switch RI-80 SMD Series Ultra-micro dry-reed switch hermetically sealed in a gas-filled glass envelope. Single-pole, single-throw (SPST) type, having normally open contacts,
MADP-000504-10720T. Non Magnetic MELF PIN Diode
MADP-54-172T Features High Power Handling Low Loss / Low Distortion Leadless Low Inductance MELF Package Non-Magnetic Surface Mountable RoHS Compliant MSL 1 Package Style 172 Dot Denotes Cathode Description
Metal-Oxide Varistors (MOVs) Surface Mount Multilayer Varistors (MLVs) > MLN Series. MLN SurgeArray TM Suppressor. Description
MLN SurgeArray TM Suppressor RoHS Description The MLN SurgeArray Suppressor is designed to help protect components from transient voltages that exist at the circuit board level. This device provides four
1 Form A Solid State Relay
Form A Solid State Relay VOAT, VOAABTR FEATURES 9 S S DC S' 3 S' High speed SSR - t on /t off < 8 μs Maximum R ON. Isolation test voltage 3 V RMS Load voltage V Load current A DC configuration DIP- package
SMD High Power Precision Resistors
Key Features High precision - TCR 5ppm/ C and 10ppm/ C Tolerance down to 0.01% Thin film (nichrome) Choice of packages Stable high frequency performance Temperature range -55 C to +155 C Applications Communications
Gas Discharge Tube (GDT) Products CG5 and SL0902A Series. CG5 and SL0902A Series
Description Agency Approvals AGENCY AGENCY FILE NUMBER E128662 2 Electrode GDT Graphical Symbol Littelfuse Broadband Optimized SL0902A Series offers high surge ratings in a miniature package. Special design
1a/1c 5A/10A small power relays
VDE a/c A/A small power relays RELAYS RoHS compliant FEATURES High electrical noise immunity High switching capacity in a compact package High sensitivity: mw (a), mw (c) High surge voltage:, V between
HIGH REPEATABILITY SPDT, BROADBAND 12 GHZ MAGNETIC-LATCHING RF RELAY
HIGH REPEATABILITY SPDT, BROADBAND 12 GHZ MAGNETIC-LATCHING RF RELAY SERIES RF121 RELAY TYPE RF Magnetic-Latching, SPDT, Through-hole Relay DESCRIPTION The ultraminiature RF121 relay is built on Teledyne
LOW PROFILE 2 FORM C RELAY 9.354 +0.4 5.197 0.2 +.016.008. mm inch. M.B.B.type. Initial breakdown voltage 1 A 30 V DC 30 W, 62.5 V A 30 W.
TESTING LOW PROFILE FORM C RELA TQ-RELAS 9.35 6.7..5 5..6.8.55 9.35. 5..6.8 FEATURES High sensitivity: Form C: power consumption (single side stable type) Form C: 8 power consumption (single side stable
Types MC and MCN Multilayer RF Capacitors
High-Frequency, High-Power, High-Voltage Chips with Nonmagnetic Option Rugged flexibility and compatibility with FR4 boards make Type MC and MCN capacitors ideal for use where other multilayer caps aren
COMPACT POWER RELAY. FTR-P3 Series. For automotive applications 1 POLE-25A (for 12V car battery) FTR-K1 SERIES FEATURES PARTNUMBER INFORMATION
COMPACT POWER RELAY For automotive applications 1 POLE-2A (for 12V car battery) FTR-P3 Series FTR-K1 SERIES FEATURES Compact for high density packaging High contact capacity with proven contact material.
Low Current SMD LED PLCC-2
Low Current SMD LED PLCC-2 VLMC31. 19225 DESCRIPTION These new devices have been designed to meet the increasing demand for low current SMD LEDs. The package of the VLMC31. is the PLCC-2 (equivalent to
38 Series - Relay interface modules 0.1-2 - 3-5 - 6-8 - 16 A
38 Series - Relay interface modules 0.1-2 - 3-5 - 6-8 - 16 A 38 SERIES Common features Instant ejection of relay by plastic retaining clip Integral coil indication and protection circuit EMR Electromechanical
Y.LIN ELECTRONICS CO.,LTD.
Features Current transfer ratio (CTR 50~600% at I F =5mA, V CE =5V) High isolation voltage between input and output (Viso=5000 V rms ) Creepage distance >7.62 mm Operating temperature up to +110 C Compact
1 Form A Solid State Relay
1 Form A Solid State Relay Vishay Semiconductors DIP i1791- SMD DESCRIPTION Vishay solid state relays (SSRs) are miniature, optically coupled relays with high-voltage MOSFET outputs. The LH1518 relays
RT series Miniature Printed Circuit Board Relays, Sockets and Accessories
s RT series Miniature Printed Circuit oard Relays, Sockets and ccessories pplied Coil Voltage (% of rated nom.) RT series (DC Coil) 6 mp PC oard Miniature Relay Meets VDE 0mm Spacing, KV Dielectric File
Surface Mounting Relay
Surface Mounting Relay Surface Mounting Relay with the World s Smallest Mounting Area and a Height of Only 5.2 mm Subminiature model as small as 5.2 (H) x 6.5 (W) x 10 (L) mm is ideal for high-density
Optocoupler, Phototransistor Output, AC Input
Optocoupler, Phototransistor Output, AC Input DESCRIPTION The SFH62A (DIP) and SFH626 (SMD) feature a high current transfer ratio, low coupling capacitance and high isolation voltage. These couplers have
SuperTan Extended (STE) Capacitors, Wet Tantalum Capacitors with Hermetic Seal
SuperTan Extended () Capacitors, Wet Tantalum Capacitors with Hermetic Seal FEATURES SuperTan Extended () represents a major breakthrough in wet tantalum capacitor Available technology. Its unique cathode
LAUBE TECHNOLOGY DRY REED RELAYS
LAUBE TECHNOLOGY DRY REED RELAYS CONTACT FORM CURRENT PART SERIES PAGE #'S (1A) SPST-NO 1 AMP D41A...0L 147~148 (Link) (1A) SPST-NO 1 AMP D71A.1.0 149~150 (Link) (1A) SPST-NO 1 AMP F51A.100 151~152 (Link)
S112-XHS. Description. Features. Agency Approvals. Applications. Absolute Maximum Ratings. Schematic Diagram. Ordering Information
Description Features The S112-X is a bi-directional, single-pole, single-throw, normally open multipurpose solid-state relay. The circuit is composed of one input IR LED with a series limiting resistor
Type RP73 Series. SMD High Power Precision Resistors. Key Features. Applications. Characteristics - Electrical - RP73 Series - Standard
Key Features n High precision - tolerances down to 0.05% n Low TCR - down to 5ppm/ C n Stable high frequency performance n Operating temperature -55 C to +155 C n Increased power rating - up to 1.0W n
MAXIMUM LOAD CURRENT 1 A SN SERIES
SOLID STATE RELAY (I/O Module) MAXIMUM LOAD CURRENT 1 A SN SERIES RoHS compliant FEATURES I/O modules for interface between CPU and external input devices or loads Ultra slim and light weight, SIL s type
High Performance Schottky Rectifier, 1 A
High Performance Schottky Rectifier, A VS-MQNPbF Cathode Anode DO-24AC (SMA) PRODUCT SUMMARY Package DO-24AC (SMA) I F(AV) A V R V V F at I F.78 V I RM ma at 25 C T J max. 5 C Diode variation Single die
RELAYS Solar Energy Systems
RELAYS Solar Energy Systems FUJITSU COMPONENTS CONTENTS Fujitsu relays for solar applications DC voltage versions - AC voltage versions - Latching versions RELAY PRODUCT LINE UP - SOLAR ENERGY SYSTEMS
0.8 U N /0.5 U N 0.8 U N /0.5 U N 0.8 U N /0.5 U N 0.2 U N /0.1 U N 0.2 U N /0.1 U N 0.2 U N /0.1 U N
55 Series - General purpose relays 7-10 A Features 55.12 55.13 55.14 Printed circuit mount, general purpose 2, 3 & 4 Pole relays 55.12-2 Pole 10 A 55.13-3 Pole 10 A 55.14-4 Pole 7 A AC coils & DC coils
High-ohmic/high-voltage resistors
FEATURES These resistors meet the safety requirements of: UL1676 (range 510 kω to 11 MΩ) EN60065 BS60065 (U.K.) NFC 92-130 (France) VDE 0860 (Germany) High pulse loading capability Small size. APPLICATIONS
Low Current SMD LED PLCC-2
Low Current SMD LED PLCC-2 VLMC31. 19225 DESCRIPTION These new devices have been designed to meet the increasing demand for low current SMD LEDs. The package of the VLMC31. is the PLCC-2 (equivalent to
RM17TE 183...528 V AC. Main. Product or component type. Product specific application. Relay monitored parameters 250 V DC 5 A DC
Characteristics multifunction control relay RM17-TE - range 183..528 V AC Complementary Reset time Maximum switching voltage Minimum switching current Maximum switching current [Us] rated supply voltage
SPST-NO SPDT DPST-NO DPDT
PCB Relay Next-generation PCB Relay Available in 2 Models Low profile:. mm max. in height Contains no lead inside and features cadmium-free contacts ensuring environment-friendly use. Conforms to VDE0
ASSR-1410, ASSR-1411 and ASSR-1420 General Purpose, Form A, Solid State Relay (Photo MOSFET) (60V/0.6A/1Ω) Features. Applications. Truth Table.
ASSR-, ASSR- and ASSR- General Purpose, Form A, Solid State Relay (Photo MOSFET) (V/.A/Ω) Data Sheet Lead (Pb) Free RoHS fully compliant RoHS fully compliant options available; -xxxe denotes a lead-free
Product Specification
Product Specification Model No.: DC-240-L01-00-TR Description: H=3.00mm Horizontal SMD DC Power Jacks Pin Shaft Diameter: 0.65mm Packing Method: Tape & Reel (600pcs./R) 1. General 1a. Scope The jacks should
DSC1001. Low-Power Precision CMOS Oscillator 1.8~3.3V. Features. General Description. Benefits. Block Diagram
DSC.8~.V LowPower Precision CMOS Oscillator General Description The DSC is a silicon MEMS based CMOS oscillator offering excellent jitter and stability performance over a wide range of supply voltages
38 SERIES. Relay interface modules 0.1-2 - 3-5 - 6-8 - 16 A. EMR Electromechanical Relays. Common features. SSR Solid State Relays. 6.
38 Relay interface modules 0.1-2 - 3-5 - 6-8 - 16 A 38 Common features Instant ejection of relay by plastic retaining clip Integral coil indication and protection circuit 6.2 mm wide EMR - DC, AC or AC/DC
Optocoupler, Phototransistor Output, High Reliability, 5300 V RMS, Low Input Current
Optocoupler, Phototransistor Output, High Reliability, 53 V RMS, Low Input Current FEATURES A C 1 2 4 3 C E Operating temperature from -55 C to +11 C Good CTR linearity depending on forward current Isolation
60 Series - General purpose relays 6-10 A. Features 60.12 60.13
Features 60.12 60.13 Plug-in mount 10 A General purpose relay 2 & 3 pole changeover contacts Cadmium Free contacts (preferred version) AC coils & DC coils UL Listing (certain relay/socket combinations)
Thick Film Resistor Networks, Military, MIL-PRF-83401 Qualified, Type RZ010 and RZ020 Dual-In-Line, Molded DIP
MDM (Military M831/1 and /2) Thick Film Resistor Networks, Military, MIL-PRF-831 Qualified, Type RZ1 and RZ2 Dual-In-Line, Molded DIP STANDARD ELECTRICAL SPECIFICATIONS VISHAY DALE MODEL/ PIN NO. MIL STYLE
Precision Surface Mount Resistors Wirewound or Metal Film Technologies
Precision Surface Mount Resists irewound Metal Film Technologies FEATURES Accding to CECC 40402-801 (wirewound) ide range of ohmic values (0.04 to 1 M) Low temperature coefficient (± 25 ppm/ C available)
SPEC NO: DSAJ8637 REV NO: V.6B DATE: JUL/01/2016 PAGE: 1 OF 5 APPROVED:
1.0X0.5mm SMD CHIP LED LAMP ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Part Number: APHHS1005ZGC Green Features 1.0mmX0.5mm SMD LED, 0.5mm thickness. Low power
4N25 Phototransistor Optocoupler General Purpose Type
4N Phototransistor Optocoupler General Purpose Type Data Sheet Lead (Pb) Free RoHS 6 fully compliant RoHS 6 fully compliant options available; -xxxe denotes a lead-free product Description The 4N is an
Pluggable interface relays CR-P Pcb relays
2CDC 293 034 F0004 1 2 4 3 Features 9 different supply s: DC versions: 12 V, 24 V, 48 V, 110 V AC versions: 24 V, 48 V, 110 V, 120 V, 230 V Output contacts: 1 c/o (16 A) or 2 c/o (8 A) Cadmium-free contact
Plug-in relays Mini ISO relays
Powertrain Systems Chassis Systems Safety Security Body Driver Information Convenience Description Features Limiting continuous current 70 A Dimensional characteristics and the functional allocation of
G7SA. Ordering Information. Slim Plug-In Safety Relay. Slim Safety Relay for Machine Control. H Slim body only 13 x 24 x 50 mm
Slim Plug-In Safety Relay Slim Safety Relay for Machine Control H Slim body only 13 x 24 x 50 mm (six poles) H Four-pole and six-pole models are available H Terminal arrangement simplifies PCB pattern
Cable Plug acc. to DIN EN 175301-803, Form A
Cable Plug acc. to DIN EN 175301-803, Form A Complete program Contact form 18 mm Also available with LED indicator Optional 4-pin version for pressure switch or impulse valves respectively Versions with
SKR - industry relay
SKR - industry relay the universal relay SKR the time module STM the socket The strengths of the SKR industry relay lie in the mature and thoughtout construction. Over-average contact safety and life time,
B Recommended land pattern: [mm] SSt. SSt 2014-07-15 2014-05-12. SSt. SSt. SSt 2014-01-07. SSt 2013-11-19. SSt. SBa. SSt 2013-04-24.
![B Recommended land pattern: [mm] SSt. SSt 2014-07-15 2014-05-12. SSt. SSt. SSt 2014-01-07. SSt 2013-11-19. SSt. SBa. SSt 2013-04-24.](/thumbs/17/124841.jpg "B Recommended land pattern: [mm] SSt. SSt 2014-07-15 2014-05-12. SSt. SSt. SSt 2014-01-07. SSt 2013-11-19. SSt. SBa. SSt 2013-04-24.")
A Dimensions: [mm] B Recommended land pattern: [mm] D Electrical Properties: Properties Test conditions Value Unit Tol. Inductance 1 khz/ 100 mv L 2x 51 µh ±30% Impedance Z max 5500 Ω typ. Rated current
Standard SMD LED PLCC-2
Standard SMD LED PLCC-2 DESCRIPTION 948553 This device has been designed for applications requiring narrow brightness and color selection. The package of this device is the PLCC-2. It consists of a lead
handbook, 2 columns handbook, halfpage 085 CS
FEATURES Polarized aluminium electrolytic capacitors, non-solid, self healing Extended voltage and capacitance range SMD-version, fully moulded, insulated Flexible terminals, reflow and wave solderable
Relay Products Automotive Catalog
Relay Products Automotive Catalog Automotive With design, production and support locations around the globe, TE Relay Products is one of the world s leading manufacturers of relays. TE Relay Products not
Optocoupler, Phototransistor Output, with Base Connection, 300 V BV CEO
SFH64 Optocoupler, Phototransistor Output, with Base Connection, 3 V BV CEO i1794-3 DESCRIPTION The SFH64 is an optocoupler with very high BV CER, a minimum of 3 V. It is intended for telecommunications
SELECTION GUIDE. Nominal Input
www.murata-ps.com NKE Series FEATURES RoHS Compliant Sub-Miniature SIP & DIP Styles 3kVDC Isolation UL Recognised Wide Temperature performance at full 1 Watt load, 40 C to 85 C Increased Power Density
Type Contact material Contact form Construction Model General purpose AgCdO SPDT Semi-sealed G2R-1
Power PCB Relay G2R Creepage distance of 8.0 mm (0.31) min. between coil and contact. Dual-winding latching type available. Plug-in and quick-connect terminals available. High sensitivity (360 mw) and
High-ohmic/high-voltage resistors
FEATURES High pulse loading capability Small size. APPLICATIONS Where high resistance, high stability and high reliability at high voltage are required High humidity environment White goods Power supplies.
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General Purpose & High Capacitance Class 2, X7R
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General Purpose & High Capacitance Class 2, 6.3 V TO 50 V 100 pf to 22 µf RoHS compliant & Halogen Free Product Specification October 13, 11 V.8 Product
Type Sealing Poles Contacts Rated voltage Model Standard d Flux-tight 4 poles oes 3PST-NO, SPST-NC 24 VDC G7SA-3A1B 3PST-NO, 3PST-NC
Safety Relay Slim Safety Relays Conforming to EN Standards The forcibly guided contact in the assures safe operation (EN50205 Class A, approved by VDE.) Ideal for use in safety circuits in press machinery,