TRAINING CATALOG 2014

Transcription

1 TRAINING CATALOG Register Today! uta.edu/ded Serving the community one organization, one project, one person at a time.

2 TABLE OF CONTENTS Certification Programs Public Sector Safety and Health...4 Accident Investigation...4 Specialist in Safety & Health...4 Certified Safety & Health Official...5 Safety, Health & Environmental Professional...6 Master Certification...6 On-Site Services Contract Training... 7 Safety & Health Consulting... 7 OSHA Course Listings OSHA 500 Trainer Course in OSHA Standards for Construction...8 OSHA 501 Trainer Course in OSHA Standards for General Industry...8 OSHA 502 Update for Construction Industry Outreach Trainers...8 OSHA 503 Update for General Industry Outreach Trainers...8 OSHA 510 OSHA Standards for the Construction Industry...8 OSHA 511 OSHA Standards for General Industry...9 OSHA 521 OSHA Guide to Industrial Hygiene...9 OSHA 2015 Hazardous Materials...9 OSHA 2045 Machinery and Machine Guarding Standards...9 OSHA 2225 Respiratory Protection...9 OSHA 2255 Principles of Ergonomics (formerly OSHA 2250)...9 OSHA 2264 Permit-Required Confined Space Entry...9 OSHA 3015 Excavation, Trenching and Soil Mechanics (formerly OSHA 3010)...9 OSHA 3095 Electrical Standards OSHA 3115 Fall Protection (formerly OSHA 3110 Fall Arrest Systems) OSHA 5400 Trainer Course for the Maritime Industry...10 OSHA 5402 Update for Maritime Industry Outreach Trainers...10 OSHA 5410 OSHA Standards for the Maritime Industry...10 OSHA 5600 Trainer Course for Disaster Site Worker...10 OSHA 5602 Update for Disaster Site Worker Outreach Trainers...10 OSHA 5810 Hazard Recognition and Standards for Oil and Gas Exploration and Production...10 OSHA 6000 Collateral Duty for Other Federal Agencies...11 OSHA 6010 OSHA Course for Other Federal Agencies...11 OSHA Seminars OSHA 7000 OSHA Training Guidelines for Safe Patient Handling...11 OSHA 7005 Public Warehousing and Storage...11 OSHA 7100 Introduction to Machinery and Machine Safeguarding...11 OSHA 7105 Evacuation and Emergency Planning...11 OSHA 7110 Safe Bolting: Principles and Practices...11 OSHA 7115 Lockout/Tagout...12 OSHA 7125 Seminar on Combustible Dust Hazards...12 OSHA 7200 Bloodborne Pathogens Exposure Control for OSHA 7205 OSHA 7210 OSHA 7300 OSHA 7400 OSHA 7405 OSHA 7410 OSHA 7415 OSHA 7500 OSHA 7505 Healthcare Facilities...12 Health Hazard Awareness...12 Pandemic Influenza Preparedness...12 Understanding OSHA s Permit-Required Confined Space Standard...12 Noise Hazards in the Construction Industry...12 Fall Hazard Awareness for the Construction Industry...13 Managing Excavation Hazards...13 Construction Industry Hazards and Prevention Strategies...13 Introduction to Safety and Health Management...13 Introduction to Accident Investigation UT Arlington OSHA Training Catalog 2014

3 OSHA 7510 Introduction to OSHA for Small Businesses...13 OSHA 7600 Disaster Site Worker...13 OSHA 7845 Recordkeeping Rule Seminar...13 Specialized Safety & Health Courses SH 200 Trainer Course in H2S (Hydrogen Sulfide)...13 SH 241 HAZWOPER General Site Worker 40-Hour...14 SH 242 HAZWOPER General Site Worker Annual Refresher...13 SH 243 HAZWOPER Site Supervisor...14 SH 244 HAZWOPER First Responder Awareness Level...14 SH 245 HAZWOPER First Responder Operations Level...14 SH 246 HAZWOPER First Responder Awareness Level Annual Refresher...14 SH 247 HAZWOPER First Responder Operations Level Annual Refresher...14 SH 300 Safety Standards for Scaffolding...14 SH 340 Cranes, Derricks, and Material Handling...15 SH 400 Trainer Course for Medic First Aid and CPR...15 SH 560 ICS/NIMS for the Disaster Response Supervisor and Professional...15 SH 561 Disaster and Emergency Management for the Disaster Response Professional...15 SH 600 Workplace Violence: Prevention and Management...15 SH 601 Intermediate Accident Investigation and Photography...16 SH 630 Safety Training and Education Strategies...16 SH 701 Advanced Accident Investigation...16 SH 710 Blueprint Reading...16 SH 801 Enhancing Safety Performance with Behavioral Safety: Current Trends in BBS...16 SH 810 Written Program for Safety and Health Management...16 SH 900 Leading Measures for Improving Safety Performance...16 SH 910 Principles of Auditing...17 SH 913 Trainer Course for Hazard Communication/ Globally Harmonized System (GHS)...17 SH 920 Process Safety Management (PSM) Introduction...17 SH 930 Project Management for EHS Professionals...17 MC 101 Management System Design...17 Healthcare Courses HC 200 Joint Commission Healthcare Safety & Health Overview...17 HC 301 Trainer Course for Healthcare Employee Safety and Health...16 Risk Management Courses RM 101 RM 201 RM 202 RM 203 RM 204 RM 740 RM 750 Safety, Health, and Environmental Risk Management (SHERM) Principles...16 Assessment Techniques...18 Performance Measurement and Data Analysis...18 Risk Informed Decision Making...18 Human Performance Improvement and Safety Culture...18 Critical Thinking and Analysis...19 Risk Communication...19 Environmental Courses ETI 101 ETI 201 ETI 301 ETI 302 ETI 303 ETI 305 ETI 401 ETI 405 ETI 501 ETI 720 ETI 722 ETI 802 ETI 810 Introduction to Environmental Compliance...19 Fundamentals of the Clean Air Act...19 Introduction to Water and Wastewater Regulations...19 Storm Water Pollution Prevention Plans (SWPPP)...20 Spill Prevention, Control, and Countermeasure (SPCC)...20 Wastewater Pretreatment - Strategies and Controls...20 Resource Conservation Recovery Act...20 Aboveground Storage Tank/Underground Storage Tank...20 EPA Outreach Trainer Course...20 Environmental Monitoring...21 Chemistry for the Environmental Professional...21 Pollution Prevention and Lean Principles Workshop...21 Environmental Audits...21 Course Schedule by Date Course Schedule by Location Registration Information uta.edu/ded 3

4 SAFETY AND HEALTH CERTIF Public Sector Safety and Health Fundamentals Certificate Program Complete a minimum of seven (7) courses that include a minimum of 68 contact hours. Three (3) required courses as listed below for a minimum of 39 contact hours and a minimum of four (4) elective courses from the list below that include a minimum of 29 contact hours. General Industry Required (3) n OSHA 511 Standards Course For General Industry n OSHA 7500 Introduction to Safety and Health Management n OSHA 7505 Introduction to Accident Investigation Electives (4) n OSHA 3095 Electrical Standards n OSHA 2264 Permit-Required Confined Space Entry or OSHA Understanding OSHA s Permit-Required Confined Space Standard n OSHA 7000 OSHA Training Guidelines for Safe Patient Handling n OSHA 7005 Public Warehousing and Storage n OSHA 7100 Introduction to Machinery and Machine Safeguarding n OSHA 7105 Evacuation and Emergency Planning n OSHA 7115 Lockout/Tagout n OSHA 7200 Bloodborne Pathogens Exposure Control for Healthcare Facilities n OSHA 7205 Health Hazard Awareness n OSHA 7210 Pandemic Influenza Preparedness n OSHA 7845 Recordkeeping Rule Seminar Construction Industry Required (3) n OSHA 510 Standards for the Construction Industry n OSHA 7500 Introduction to Safety and Health Management n OSHA 7505 Introduction to Accident Investigation NEW Electives (4) n OSHA 3015 Excavation, Trenching and Soil Mechanics (formerly OSHA 3010) or OSHA 7410 Managing Excavation Hazards n OSHA 3095 Electrical Standards n OSHA 3115 Fall Protection (formerly OSHA 3110) or OSHA 7405 Fall Hazard Awareness for the Construction Industry n OSHA 7105 Evacuation and Emergency Planning n OSHA 7110 Safe Bolting: Principles and Practices n OSHA 7205 Health Hazard Awareness n OSHA 7400 Noise Hazards in the Construction Industry n OSHA 7845 Recordkeeping Rule Seminar SPECIALIST IN SAFETY & HEALTH Earn your SSH in Disaster Response, Oil & Gas, Port Safety or Healthcare by completing the required courses and two (2) electives. Disaster Response Required (2) n OSHA 7600 Disaster Site Worker n OSHA 511 Standards Course for General Industry or OSHA 510 Standards Course for the Construction Industry Electives (2) n Any one (1) OSHA course (except Trainer Courses) n SH 241 HAZWOPER General Site Worker 40-Hour or SH 245 HAZWOPER First Responder Operations Level Oil & Gas Required (2) n OSHA 5810 Hazard Recognition for Oil and Gas Exploration and Production n SH 200 Trainer Course for H2S (Hydrogen Sulfide) Electives (2) Any two (2) OSHA courses (except Trainer Courses) n n Port Safety Required (2) n OSHA 5410 Standards for the Maritime Industry n SH 340 Cranes, Derricks, and Material Handling Electives (2) Any two (2) OSHA courses (except Trainer Courses) n n Healthcare Required (3) n HC 200 Strategies for Compliance by Healthcare Organizations in Employee Safety and Health n HC 301 Trainer Course for Healthcare Employee Safety and Health n OSHA 511 Standards Course for General Industry Electives (2) Any two (2) OSHA courses (except Trainer Courses) n n Accident Investigation Certificate Required (2) n SH 601 Intermediate Accident Investigation and Photography n SH 701 Advanced Accident Investigation NEW NEW NEW NEW NEW 4 UT Arlington OSHA Training Catalog 2014

5 ICATION PLANNING GUIDE GENERAL INDUSTRY SPECIALIST IN SAFETY & HEALTH Earn your SSH by completing one (1) required course and three (3) electives in general industry or construction. GENERAL INDUSTRY CERTIFIED SAFETY & HEALTH OFFICIAL Earn your CSHO by completing six (6) required courses and two (2) electives in general industry or construction. REQUIRED (1) n OSHA Standards Course for General Industry ELECTIVES (3) n OSHA OSHA Guide to Industrial Hygiene n OSHA Hazardous Materials n OSHA Machinery and Machine Guarding Standards n OSHA Respiratory Protection n OSHA Principles of Ergonomics (formerly OSHA 2250) n OSHA Permit-Required Confined Space Entry n OSHA Electrical Standards n OSHA Fall Protection (formerly OSHA 3110) CONSTRUCTION INDUSTRY REQUIRED (1) n OSHA Standards Course for the Construction Industry ELECTIVES (3) n OSHA Hazardous Materials n OSHA Respiratory Protection n OSHA Permit-Required Confined Space Entry n OSHA Excavation, Trenching and Soil Mechanics (formerly OSHA 3010) n OSHA Electrical Standards n OSHA Fall Protection (formerly OSHA 3110) n SH Safety Standards for Scaffolding n SH Cranes, Derricks and Material Handling In order to obtain your certification, download a Certificate Request Form from uta.edu/ded/osha. REQUIRED (6) n OSHA Trainer Course in OSHA Standards for General Industry Prerequisites Required: OSHA 511 and 5 years safety experience. n OSHA Standards Course for the Construction Industry Completion of OSHA 500 or 502 meets requirements. n OSHA OSHA Guide to Industrial Hygiene n OSHA Machinery and Machine Guarding Standards n OSHA Permit-Required Confined Space Entry n OSHA Electrical Standards ELECTIVES (2) n OSHA Hazardous Materials n OSHA Respiratory Protection n OSHA Principles of Ergonomics (formerly OSHA 2250) n OSHA Fall Protection (formerly OSHA 3110) Note: Two (2) OSHA seminars may be counted as one elective. See page 11. CONSTRUCTION INDUSTRY REQUIRED (6) n OSHA Trainer Course in OSHA Standards for Construction Prerequisites Required: OSHA 510 and 5 years safety experience. n OSHA Standards for General Industry Completion of OSHA 501 or 503 meets requirements. n OSHA OSHA Guide to Industrial Hygiene n OSHA Excavation, Trenching and Soil Mechanics (formerly OSHA 3010) n OSHA Electrical Standards n OSHA Fall Protection (formerly OSHA 3110) ELECTIVES (2) n OSHA Hazardous Materials n OSHA Machinery and Machine Guarding Standards n OSHA Respiratory Protection n OSHA Principles of Ergonomics (formerly OSHA 2250) n OSHA Permit-Required Confined Spaces Entry Note: Two (2) OSHA seminars may be counted as one elective. See page uta.edu/ded 5

6 SAFETY AND HEALTH CERTIFICATION PLANNING GUIDE SAFETY, HEALTH & ENVIRONMENTAL PROFESSIONAL Earn your SHEP by completing course work in Safety and Health, Environmental, and Risk Management. Completion of your SHEP credential fulfills the prerequisite requirement for the Master Certification Programs. REQUIRED (1) n CSHO General Industry Certification Requires no additional electives n CSHO Construction Industry Certification Requires no additional electives n OSHA Trainer Course in OSHA Standards for General Industry Requires four (4) electives n OSHA Trainer Course in OSHA Standards for Construction Requires four (4) electives ELECTIVES (4) *With your CSHO, these electives are not required. n OSHA OSHA Guide to Industrial Hygiene n OSHA Hazardous Materials n OSHA Machinery and Machine Guarding Standards n OSHA Respiratory Protection n OSHA Principles of Ergonomics (formerly OSHA 2250) n OSHA Permit-Required Confined Space Entry n OSHA Excavation, Trenching and Soil Mechanics (formerly OSHA 3010) n OSHA Electrical Standards n OSHA Fall Protection (formerly OSHA 3110) n OSHA Hazards Recognition for Oil and Gas n SH Safety Standards for Scaffolding n SH Cranes, Derricks and Material Handling n SH Written Program for Safety and Health Management REQUIRED (2) n ETI Introduction to Environmental Compliance n RM Safety, Health, and Environmental Risk Management Principles ELECTIVES (1) n ETI Fundamentals of The Clean Air Act n ETI Water and Wastewater Regulations n ETI Waste Management Regulations n ETI EPA Outreach Trainer Course n ETI Pollution Prevention and Lean Principles SAFETY & HEALTH MASTER CERTIFICATION Earn your Master Certification in Safety & Health, Environmental, or Risk Management * Look for courses in the catalog indicated with the MC shield. REQUIRED (2) n SHEP Certification n MC Management System Design ELECTIVES (3) Three (3) Advanced Safety & Health Courses with/mc shield n n n ENVIRONMENTAL REQUIRED (2) n SHEP Certification n MC Management System Design ELECTIVES (3) Three (3) Advanced Environmental Courses with/mc shield n n n RISK MANAGEMENT REQUIRED (2) n SHEP Certification n MC Management System Design ELECTIVES (3) Three (3) Advanced Risk Management Courses with/mc shield n n n In order to obtain your certification, download a Certificate Request Form from uta.edu/ded/osha. 6 UT Arlington OSHA Training Catalog 2014

7 ON-SITE SERVICES contract training Do you need to train more than one person? You may save considerable time and money while increasing the effectiveness of your training program by contracting with us to bring our courses and instructors directly to your location. The UT Arlington OSHA Education Center will deliver any course in this catalog at your location in a way that fits your schedule and budget. Our instructors will focus on your specific training needs and assess key risk components present at your facilities and job sites. Contract courses can also be scheduled in a timely sequence for multiple employees seeking one or more of our professional certifications. We will come to you wherever you are! Potential savings when selecting a contract course over open enrollment: (Costs are based on a three-day course and GSA rates) Open Enrollment Contract Class 5 employees Up to 20 employees Tuition: $595 $7,000 (includes instructor costs) Hotel: $420 Training held at a location of your choice Airfare: $350 Meals: $170 Cost per Employee: $1,535 per employee $250 per employee Total Cost: $7,675 (5 employees) $7,000 (20 employees) SAFETY & HEALTH CONSULTING When you need services from experienced safety professionals, consider the UT Arlington OSHA Education Center as your solution. We can provide you with expert consultation on your safety and health programs in the construction, general, oil & gas, healthcare, public sector, disaster management, and maritime/port safety industries. Whether you need a one-time audit or more robust program design and/or support, the UT Arlington OSHA Education Center can provide you with the necessary resources Contact Us Today! osha@uta.edu uta.edu/ded 7

8 COURSES OSHA COURSES OSHA 500 Trainer Course in OSHA Standards for Construction 30 Hours $695 This course is designed for individuals interested in teaching the OSHA 10- and 30-hour construction safety and health Outreach Training Program to their employees and other interested groups. Using OSHA Construction Standards as a guide, special emphasis is placed on those topics required in the 10-and 30-hour programs as well as those which are most hazardous. Students are briefed on effective instructional approaches and use of visual aids and handouts. This course allows the student to become a trainer in the OSHA Outreach Training Program, to conduct both 10-and 30-hour Construction Outreach classes, and to issue cards to participants after verifying course completion. OSHA 501 Trainer Course in OSHA Standards for General Industry 30 Hours $695 This trainer course is designed for individuals interested in teaching the OSHA 10- or 30-hour General Industry safety and health Outreach training program to their employees and other interested groups. Using the OSHA General Industry Standards as a guide, special emphasis is placed on those topics required in the 10-and 30-hour programs as well as those which are most hazardous. Students are briefed on effective instructional approaches and use of visual aids and handouts. This course allows the student to become a trainer in the OSHA Outreach Training Program, to conduct both 10-and 30-hour General Industry Outreach classes, and to issue cards to participants after verifying course completion. OSHA 502 Update for the Construction Industry Outreach Trainers 19 Hours $495 This course is designed for Outreach Training Program trainers who have completed OSHA #500 Trainer Course in Occupational Safety and Health Standards for the Construction Industry and are authorized trainers in the OSHA Outreach Training Program. The course provides an update on OSHA Construction Standards, policies and regulations. Important Note: Authorized Outreach Training Program trainers are required to attend this course once every four (4) years to maintain their trainer status. OSHA 503 Update for General Industry Outreach Trainers 19 Hours $495 This course is designed for Outreach Training Program trainers who have completed course 501. Trainer Course in Occupational Safety and Health Standards for General Industry and who are authorized trainers in the OSHA Outreach Training Program. The course provides an update on OSHA General Industry Standards, policies, and regulations. Important Note: Authorized Outreach Training Program trainers are required to attend this course once every four (4) years to maintain their status. OSHA 510 OSHA Standards for the Construction Industry 30 Hours $595 This course covers the OSHA Standards, policies, and procedures in the construction industry. Topics include scope and application of the OSHA Construction Standards, construction safety and health principles, and special emphasis on those areas in construction which are most hazardous. Upon course completion students will have the ability to define construction terms found in the OSHA Construction Standards, identify hazards which occur in the construction industry, locate and determine appropriate OSHA Construction Standards, policies, and procedures, and describe the use of OSHA Construction Standards and regulations to supplement an ongoing safety and health program. FEATURED MILTARY SERVICE CENTER COURSE SH 385 EM and OSHA Construction 30-Hour U.S. Army Corps of Engineers Safety and Health Requirements 40 Hours $695 This course is designed specifically for contractors, military, and government employees who enforce or must comply with the United States Army Corps of Engineers Safety and Health Requirements (EM , U.S. Army Corps of Engineers Safety & Health Requirements Manual) and OSHA 29 CFR Attendees will learn the unique procedures established by the U.S. Army Corps of Engineers contracts and EM as well as the corresponding OSHA construction safety requirements and how to use this information to identify and control potential hazards on construction sites. Course topics include Introduction to OSHA, Focus Four, recognition, avoidance, abatement, and prevention of safety and health hazards in construction. Specific topics cover preparation of Accident Prevention Plans (APP), Activity Hazard Analysis (AHA) development, Job-site inspections, a review of EM safety and health requirements, and training on the 29 CFR 1926 OSHA Construction Standards. Upon successful completion, attendees will receive a certificate of completion from The University of Texas Arlington for SH 385 and an OSHA 30-Hour Construction Card. 8 UT Arlington OSHA Training Catalog 2014

9 Important Note: Please consult the uta.edu/ded website for additional information and prerequisite requirements. OSHA 511 OSHA Standards for General Industry 30 Hours $595 This course covers the OSHA standards, policies, and procedures in general industry. Topics include scope and application of the OSHA General Industry Standards, general industry principles and special emphasis on those areas in general industry which are most hazardous. Upon course completion students will have the ability to define general industry terms found in the OSHA General Industry Standards, identify hazards which occur in general industry, locate and determine appropriate OSHA General Industry Standards, policies, and procedures, and describe the use of OSHA General Industry Standards and regulations to supplement an ongoing safety and health program. OSHA 521 OSHA Guide to Industrial Hygiene 26 Hours $595 This course covers industrial hygiene practices and related OSHA regulations and procedures. Course topics include recognition, evaluation, and control of chemical, physical, biological and ergonomic hazards, Permissible Exposure Limits (PEL), OSHA health standards, respiratory protection, engineering controls, OSHA sampling protocols and strategies, and workplace health program elements. The course features workshops in health hazard recognition, OSHA health standards and use of sampling equipment. OSHA 2015 Hazardous Materials 26 Hours $595 This course covers OSHA General Industry Standards and other consensus and proprietary standards that relate to the use of hazardous materials. Course topics include flammable and combustible liquids, compressed gases, LP-gases, and cryogenic liquids. Related processes such as spraying and dipping and use of electrical equipment in hazardous locations are also discussed. Upon course completion students will have the ability to assess compliance with OSHA hazardous materials standards, determine hazardous (classified) locations, and proper moving, storing, and handling of hazardous materials. OSHA 2045 Machinery and Machine Guarding Standards 26 Hours $595 This course covers the various types of common machinery, machine safe guards, and related OSHA regulations and procedures. Guidance is provided on the hazards associated with various types of machinery and the determination of proper machine safe guards. Course topics include machinery processes, mechanical motions, points of operation, control of hazardous energy sources (lockout/tagout), guarding of portable powered tools, and common OSHA machine guarding violations. Program highlights include the ability to recognize hazards and provide options for control and hazard abatement through machines safeguarding inspection workshops. OSHA 2225 Respiratory Protection 26 Hours $595 This course covers the requirements for the establishment, maintenance, and monitoring of a respiratory protection program. Course topics include terminology, OSHA Respiratory Protection Standards, NIOSH certification, respiratory protection programs, and medical evaluation requirements. Program highlights include workshops on respirator selection, qualitative and quantitative fit testing, and the use of respiratory protection and support equipment. OSHA 2255 Principles of Ergonomics (formerly OSHA 2250) 19 Hours $595 This course covers the use of ergonomic principles to recognize, evaluate, and control workplace conditions that cause or contribute to musculoskeletal and nerve disorder. Course topics include work physiology, anthropometry, musculoskeletal disorders, use of video display terminals, and risk factors such as vibration, temperature, material handling, repetition, and lifting and patient transfers in health care. Course emphasis is on industrial case studies covering analysis and design of work situations and equipment workshops in manual lifting, and coverage of current OSHA compliance policies and guidelines. OSHA 2264 Permit-Required Confined Space Entry 22 Hours $595 This course covers the safety and health hazards associated with permit-required confined space entry. Course topics include recognition of confined space hazards, identification of permit and non-permit required confined spaces, use of instrumentation to evaluate atmospheric hazards, ventilation techniques, developing and implementation of a confined space program, proper signage, and training requirements. This course features workshops on permit entry classification, instrumentation and program development. OSHA 3015 Excavation, Trenching and Soil Mechanics (formerly OSHA 3010) 22 Hours $595 This course covers the OSHA Excavation Standards and safety and health aspects of excavation and trenching. Course topics include practical soil mechanics and its relationship to the stability of shored and unshored slopes and walls of excavations, introduction of various types of shoring (wood timbers and hydraulic), soil classification, and use of protective systems. Testing methods are demonstrated and students participate in workshops in the use of instruments such as penetrometers, torvane shears and engineering rods. COURSE DESCRIPTIONS uta.edu/ded 9

10 COURSES OSHA 3095 Electrical Standards 26 Hours $595 This course covers OSHA Electrical Standards and the hazards associated with electrical installations and equipment. Course topics include single-and three-phase systems, cord-and plug-connected and fixed equipment, grounding, ground fault circuit interrupters, and safety-related work practices. Emphasis is placed on electrical hazard recognition and OSHA Standards, policies, and procedures and applicable portions of the National Electrical Code (NEC). Students will participate in workshops on the safe and correct use of electrical testing equipment. OSHA 3115 Fall Protection (formerly OSHA 3110 Fall Arrest System) 22 Hours $595 This course covers the OSHA Fall Protection Standards for construction and general industry and current fall protection methods. Course topics include principles of fall protection, components and limitations of fall arrest systems, and OSHA Standards and policies regarding fall protection. Students will participate in workshops demonstrating the inspection and use of fall protection equipment, residential construction fall protection, training requirements, and developing a fall protection program. OSHA 5400 Trainer Course for the Maritime Industry 30 Hours $695 This course is designed for individuals interested in teaching the OSHA 10- and 30-hour Maritime Safety and Health Outreach Training Program to their employees and other interested groups. Special emphasis is placed on those topics that are required in the 10-and 30-hour Outreach Training Program as well as the most hazardous in the maritime industry using OSHA Maritime Standards as a guide. Students are briefed on effective instructional approaches and use of visual aids and handout. This course allows the student to become a trainer in the Outreach training Program, to conduct 10-and 30-hour maritime classes in shipyard employment, marine terminals, and longshoring, and to issue cards to participants after verifying course completion. OSHA 5402 Maritime Industry Trainer Update Course 19 Hours $495 This course is designed for individuals who have successfully completed OSHA course #5400 Trainer course in OSHA Standards for the Maritime Industry and are active Outreach Training Program trainers. The course updates the OSHA Maritime standards, policies, and regulations. Important Note: Authorized Outreach Training Program trainers are required to attend this course once every four (4) years to maintain their trainer status. OSHA 5410 OSHA Standards for the Maritime Industry 35 Hours $695 This course covers OSHA policies, procedures, and standards for the maritime industry, specifically shipyard employment, marine terminals, and longshoring. Using the OSHA Maritime Standards as a guide, special emphasis is placed on those areas in the Maritime Industry which are most hazardous. OSHA 5600 Disaster Site Worker Trainer Course 30 Hours $695 This course prepares experienced trainers to present the OSHA #7600 Disaster Site Worker Course, intended for second responders (those arriving hours or days after the event). Course topics include the National Response Framework, the Incident Command System, disaster work zone safety, respiratory protection, communication issues, applying elements of successful adult training programs, and knowledge, skills and attitudes to awareness training about safety and health standards at natural and human-made disaster sites. Students are provided the opportunity to practice knowledge and skills through discussion, planned exercises, demonstrations, and presentations. Lesson plans and training materials for the OSHA 7600 Disaster Site Worker course are provided. OSHA 5602 Update for Disaster Site Worker Trainer Course 7.5 Hours $395 This course is intended to update the authorized Disaster Site Worker trainer with new technical and regulatory information related to disaster response and the role of OSHA in coordinating occupational safety and health in the National Response Framework. Participants will have the opportunity to share lessons learned from teaching OSHA #7600 Disaster Site Worker Course. Important Note: Authorized Outreach Training Program trainers are required to attend this course once every four (4) years to maintain their trainer status. OSHA 5810 Hazard Recognition and Standards for On-Shore Oil and Gas Exploration and Production 30 Hours $695 This course covers OSHA Construction and General Industry Standards related to the oil and gas industry. This course provides information for employees and employers to protect themselves by developing the knowledge and skills to anticipate, recognize, evaluate and control hazards common to the on-shore oil and gas exploration and production industry. This includes work sites associated with the onshore exploration and production oil and gas industry including, but not limited to construction, drilling, completion, well servicing, production, product gathering and processing, and product transmission. This course is intended for employees and employers engaged in all phases of onshore oil and gas exploration and production. 10 UT Arlington OSHA Training Catalog 2014

11 Important Note: Please consult the uta.edu/ded website for additional information and prerequisite requirements. OSHA 6000 Collateral Duty for Other Federal Agencies 32 Hours $595 This course covers the OSH Act, Executive Order 12196, and the OSHA General Industry Standards. This course is intended for federal agency collateral duty safety and health personnel. With use of OSHA General Industry Standards, special emphasis is placed on areas in the general industry which are most hazardous. OSHA 6010 OSHA Course For Other Federal Agencies 65 Hours $1395 This course covers the recognition, evaluation, and control of safety and health hazards for federal agencies. Course topics include the OSH Act, Executive Order 12196, 29 CFR 1960 and 29 CFR 1910 General Industry Standards, understanding the Federal Safety and Health program regulations, identification of safety and health hazards, controlling hazards, hazard abatement and construction Focus Four topics. This course is intended for federal employees responsible for the occupational safety and health programs at their respective agencies. OSHA SEMINARS OSHA 7000 OSHA Training Guidelines for Safe Patient Handling 7.5 Hours $195 This course covers OSHA ergonomic guidelines for safe patient handling and methods to protect workers in all health care settings. Using OSHA s Ergonomics Guidelines for Nursing Homes as a basis for any healthcare facility, this course focuses on analyzing and identifying ergonomic hazards and practical solutions to address these issues. Course topics include developing an ergonomic work process, risk factors in patient handling and transfers, identifying work processes with the potential for musculoskeletal injuries and illnesses, protocol for resident and patient assessment, and implementing solutions including work practices and engineering controls. OSHA 7005 Public Warehousing and Storage 7.5 Hours $195 This course covers the hazards and injuries likely to occur in the public warehousing and storage operations, including encounters with powered industrial trucks, material handling, lifting and ergonomics, hazard communication, walking and working surfaces, and life safety including fire protection and evacuation. This course is intended for warehouse workers, supervisors and employers responsible for developing safe work practices and procedures in a warehouse setting. OSHA 7100 Introduction to Machinery and Machine Safeguarding 7.5 Hours $195 This course covers the process to identify, select and properly safeguard machinery to protect employees and others in the work area and deliver appropriate training in safe work practices. Course topics include types of machinery requiring guarding, point of operation, emergency eyewash/shower requirements, hazard communication, OSHA Machinery and Machine Guarding Standards violations, and corrective actions. Upon course completion students will have the ability to explain hazardous actions and motions of various types of machinery, identify methods of safeguarding, and match identified safeguards with the applicable OSHA Machinery and Machine Guarding Standards to reduce and eliminate the potential for accidents and injuries. OSHA 7105 Evacuation and Emergency Planning 7.5 Hours $195 This course covers OSHA requirements for emergency action and fire protection plans. Course topics include purpose and requirements of emergency action and fire prevention plans, elements of emergency evacuation plans, and features of design and maintenance of emergency exit routes. Students will participate in workshops pertaining to the development of emergency action plans. Upon course completion students will have the ability to list the elements of an emergency action plan and emergency evacuation floor plans, recognize violations of OSHA exit route requirements, determine whether their organization requires an emergency action plan, and develop and implement workplace emergency action and fire protection plans. OSHA 7110 Safe Bolting: Principles and Practices 7.5 Hours $195 This course covers awareness of safety issues involved in bolting applications. Course topics include safe operation and handling of high powered bolting tools, pressure vessels and piping, machinery or mechanical joints, and structural connections. The course provides workshops and demonstrations of safe bolting applications. The target audience is first line mechanical operators including millwrights, pipefitters, and those who work with mechanical joints as part of their daily work. Upon course completion the student will have the ability to understand the basic technology of bolted joints, safety principles associated with tool selection and operation, workplace conditions, and bolting methods and procedures. COURSE DESCRIPTIONS uta.edu/ded 11

12 COURSES OSHA 7115 Lockout/Tagout 7.5 Hours $195 This course covers the role and responsibility of the employer to develop and implement an energy control program, or lock-out/tagout (LOTO) for the protection of workers while performing servicing and maintenance activities on machinery and equipment. Course topics include types of hazardous energy, detecting hazardous conditions, implementing control measures as they relate to the control of hazardous energy, developing and implementing energy control programs including written isolation procedures, training of authorized and affected employees, and periodic inspection of energy control procedures using the OSHA Control of Hazardous Energy Standard. Upon course completion the student will have the ability to explain the importance of energy control programs, procedures, training, audits and methods of controlling hazardous energy. OSHA 7125 Seminar on Combustible Dust Hazards 7.5 Hours $195 This course covers the hazards posed by combustible dust within general industry. The course topics include recognizing the hazards and risks associated with combustible dust, control of electrical installation hazards, and developing controls and strategies to prevent or mitigate combustible dust fires and explosions. OSHA 7200 Bloodborne Pathogens Exposure Control for Healthcare Facilities 7.5 Hours $195 This course covers the development and implementation of Exposure Control Plans (ECP) for healthcare facilities. Course topics include understanding the OSHA Bloodborne Pathogens Standard, determining potential exposure and methods of control, developing an ECP, vaccinations, exposure incidents, training, and record keeping. The target audience is the program administrator, manager, or other personnel designated with the responsibility of developing a Bloodborne Pathogens ECP for a healthcare facility. Course highlights include students developing a template for their facility s ECP. Upon course completion students will have the ability to take a step-bystep approach in developing an ECP for their healthcare facility while utilizing the OSHA Bloodborne Pathogens Standard as a reference. OSHA 7205 Health Hazard Awareness 7.5 Hours $195 This course covers common health hazards that are encountered in the workplace. These health hazards include exposure to chemicals, asbestos, silica and lead. Course topics include identification and evaluation of health hazards and their sources of exposure, health hazard information, and engineering and work practice controls. Students participate in workshops on evaluation and abatement of workplace health hazards. Upon course completion students will have the ability to understand common health hazards in the workplace and methods for controlling and abatement of these hazards. OSHA 7210 Pandemic Influenza Preparedness 7.5 Hours $195 This course covers recognizing hazards and risks associated with a pandemic influenza event and developing strategies to assist a business, community, or family with realistic preparation for a pandemic event. Course topics include potential impact of a pandemic influenza event on a business and community, critical elements of a preparedness plan, and realistic strategies for supporting continuity of business. This course offers information on strategies that can be used to control the spread of the virus, minimizing exposure to employees and family, and resources available from OSHA and other government agencies. The intended audience is the business leader and members of their management team who may be integral to preparedness planning. Upon course completion, students will have the ability to prepare for a pandemic to assure business continuity and employee safety. OSHA 7300 Understanding OSHA s Permit-Required Confined Space Standard 7.5 Hours $195 This course covers the requirements of the OSHA Permit-Required Confined Space Standard. Course topics include safety and health hazards associated with confined space entry, and the evaluation, prevention, and abatement of these hazards. The course covers OSHA requirements; it does not feature workshops (instrumentation, control methods and testing) which are included in the OSHA #2264 Permit-Required Confined Space Entry. This course is designed for small employers or a designated representative (line supervisor or manager) with the responsibility to develop a permit-required confined space program. Upon course completion students will have a basic understanding of confined space hazards, evaluating and abatement of the hazards, and determining when a confined space shall be classified as a permit-required confined space. OSHA 7400 Noise Hazards in the Construction Industry 7.5 Hours $195 This course covers the evaluation and reduction of noise hazards in the construction industry. Course topics include OSHA Construction Noise Standards, properties of sound, noise-induced hearing loss, noise exposure control, selection and use of hearing protection, conducting sound level surveys, and worker training. Classroom demonstrations of noise instrumentation and hearing protection devices are featured. The target audience is the construction employer or representative designated with the responsibility to develop a construction noise program. Upon course completion students will understand the properties of sound and its relationship to noise-induced hearing loss, hearing protection usage, how to conduct sound level surveys and the requirements for training workers. 12 UT Arlington OSHA Training Catalog 2014

13 Important Note: Please consult the uta.edu/ded website for additional information and prerequisite requirements. OSHA 7405 Fall Hazard Awareness for the Construction Industry 7.5 Hours $195 This course covers the identification, evaluation, prevention and control of fall hazards in the construction industry. The course focuses on falls to a lower level rather than falls to the same level resulting from slips and falls. Course topics include identifying, analyzing, and preventing fall hazards utilizing OSHA Fall Protection Standards. At the conclusion of the course, students will have an awareness level of identifying fall hazards and methods to control and abate the hazards. OSHA 7410 Managing Excavation Hazards 7.5 Hours $195 This course covers the identification, evaluation, prevention and control of fall hazards in the construction industry. The course focuses on falls to a lower level rather than falls to the same level resulting from slips and falls. Course topics include identifying, analyzing, and preventing fall hazards utilizing OSHA Fall Protection Standards. At the conclusion of the course, students will have an awareness level of identifying fall hazards and methods to control and abate the hazards. OSHA 7415 Construction Industry Hazards and Prevention Strategies 15 Hours $295 This course provides federal and public sector employees with pertinent information regarding OSHA requirements and guidelines applicable to construction industry activities and operations. Topics include recognition of major safety and health hazards in the construction industry, prevention strategies, safety and health management systems, OSHA requirements and guidelines, and resources available. The course is an interactive training session focusing on class discussion and workshops. Upon course completion students will have an awareness level of the major construction hazards and prevention strategies. OSHA 7500 Introduction to Safety and Health Management 7.5 Hours $195 This course covers the effective implementation of a company s safety and health management system. The course addresses the four core elements of an effective safety and health management system and those central issues that are critical to each element s proper management. This course is an interactive training session focusing on class discussion and workshops. Upon course completion students will have the ability to evaluate, develop, and implement an effective safety and health management system for their company. OSHA 7505 Introduction to Accident Investigation 7.5 Hours $195 This one-day course covers an introduction to basic accident investigation procedures and describes accident analysis techniques. Course topics include reasons for conducting accident investigations, employer responsibilities related to workplace accident investigations, and a six step accident investigation procedure. The target audience is the employer, manager, employee or employee representative who is involved in conducting accident and/or near-miss investigations. OSHA 7510 Introduction to OSHA for Small Businesses 4 Hours $195 This course covers an introduction to the Occupational Safety and Health Administration (OSHA) and the OSH Act for owners and managers of small businesses. Course topics include an introduction to OSHA, OSHA Standards, the inspection process, implementing a safety and health program, worker training requirements and assistance available to small businesses. Upon course completion students will understand OSHA operations and procedures and how to work with OSHA to prevent or reduce injuries and illnesses in their workplace. OSHA 7600 Disaster Site Worker 15 Hours $395 This course is designed for personnel who provide skilled support services or site clean-up services (including hazardous waste cleanup) in response to a disaster. The goal of this course is to increase the participant s awareness of the safety and health hazards that may be encountered at a natural or human-caused disaster site. The importance of respiratory protection, other Personal Protective Equipment and proper decontamination procedures that may be used to mitigate the hazards will be emphasized. OSHA 7845 Recordkeeping Rule Seminar 4 Hours $195 This course covers OSHA requirements for maintaining and posting records of occupational injuries and illnesses, and reporting specific cases to OSHA. Upon course completion students will have the ability to identify OSHA requirements for recordkeeping, posting and reporting and to complete OSHA Form 300 Log of Work-Related Injuries and Illnesses, OSHA Form 300A Summary of Work-Related Injuries and Illnesses, and OSHA Form 301 Injury and Illness Incident Report. SPECIALIZED SAFETY & HEALTH COURSES SH 200 Trainer Course in H2S (Hydrogen Sulfide) 20 Hours $595 This course is designed to provide participants with the skills and knowledge to train employers and employees on the hazards associated with H2S. This course is designed for personnel interested in conduction Hydrogen Sulfide (H2S) training for companies in the petroleum or other industry with potential H2S presence in the work environment. Special emphasis is placed on ANSI/ASSE Z and the required topics in 29 CFR , Hazard Communication. COURSE DESCRIPTIONS uta.edu/ded 13

14 COURSES SH 241 HAZWOPER General Site Worker 40-Hour 40 Hours $595 This course is designed to fulfill training requirements for hazardous waste cleanup workers listed within Title 29 Code of Federal Regulations (e). Topics include: scope, application, and definitions; safety and health programs; site characterization and analysis; site control; training; medical surveillance; engineering controls, work practices, and personal protective equipment; monitoring; site safety and health plans; drums and containers; decontamination; and on-site emergencies. SH 242 HAZWOPER General Site Worker Annual Refresher 8 Hours $150 This course is designed as a refresher course for individuals who have current certification as a HAZWOPER General Site Worker. This training is required within one year of the initial 40-hour course completion and yearly thereafter. This course discusses and reviews changes in Federal and State regulations as well as relevant, upcoming legislation. In addition, developments in state-of-the-art practices and technologies, as well as key aspects from the initial training is discussed. This course satisfies the annual refresher training requirements of Title 29 Code of Federal Regulations, Part (e). SH 243 HAZWOPER Site Supervisor 8 Hours $150 This course is designed to fulfill the OSHA regulatory requirements listed within Title 29 Code of Federal Regulations (e) for on-site managers and supervisors directly responsible for employees engaged in hazardous waste operations. Topics include: corporate safety and health programs; employee training requirements; personal protective equipment programs; spill containment programs; respiratory protection programs; medical surveillance programs; and state-of-the-art practices and procedures. SH 244 HAZWOPER First Responder Awareness Level 8 Hours $150 This course is designed for individuals who are likely to witness or discover a hazardous substance release. This course provides the required training so these individuals may initiate an emergency response sequence by notifying the proper authorities of the release. Topics covered in the course include: hazardous materials and the risks associated with them; potential outcomes associated with an emergency incident; hazmat recognition; hazmat identification; the role of the awareness level individual; site security and control; DOT Emergency Response Guidebook; additional resource needs; and communications. SH 245 HAZWOPER First Responder Operations Level 24 Hours $395 This course is designed for individuals who respond to releases or potential releases of hazardous substances for the purpose of protecting nearby persons, property, or the environment. This program provides these individuals with the training required to respond in a defensive fashion without actually trying to stop the release and to contain the release from a safe distance, keep it from spreading, and prevent exposures. Topics include: basic hazard and risk assessment techniques; personal protective equipment; hazardous material terms; control, containment, and confinement operations; decontamination procedures; incident command system; toxicology; and pre-event and event specific planning. SH 246 HAZWOPER First Responder Awareness Level Annual Refresher 8 Hours $150 This course is designed as a refresher course for those individuals who have current certification as a HAZWOPER First Responder at the Awareness Level. This training is required within one year of the initial course completion and yearly thereafter. Topics include: hazardous materials and the risks associated with them; hazmat recognition and identification; the role of the awareness level individual; site security and control; the Emergency Response Guidebook; additional resource needs; and, communications. This course satisfies the annual refresher training requirements of Title 29 Code of Federal Regulations, Part (q). SH 247 HAZWOPER First Responder Operations Level Annual Refresher 8 Hours $150 This course is designed as a refresher course for those individuals who have current certification as a HAZWOPER First Responder at the Operations Level. This training is required within one year of the initial course completion and yearly thereafter. Topics include: basic hazard and risk assessment techniques; personal protective equipment; hazardous material terms; control, containment, and confinement operations; decontamination procedures; incident command system; toxicology; and, pre-event and event specific planning. This course satisfies the annual refresher training requirements of Title 29 Code of Federal Regulations, Part (q). SH 300 Safety Standards for Scaffolding 24 Hours $595 This course is designed to familiarize participants with the procedures, regulations, and safety standards for scaffolding. Scaffold users and safety professionals will benefit from this course by learning to identify and control hazards associated with scaffolding. Includes reviews of systems such as; frame scaffolding, rolling scaffolding, tube and clamp, system scaffolding, and suspended scaffolding. 14 UT Arlington OSHA Training Catalog 2014